Hello.

On 23.01.22 18:52, Uwe Kleine-König wrote:

The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.)

So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before.

Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de

[...]

drivers/net/ieee802154/adf7242.c | 4 +--- drivers/net/ieee802154/at86rf230.c | 4 +--- drivers/net/ieee802154/ca8210.c | 6 ++---- drivers/net/ieee802154/cc2520.c | 4 +--- drivers/net/ieee802154/mcr20a.c | 4 +--- drivers/net/ieee802154/mrf24j40.c | 4 +---

[...]

For the ieee802154 drivers:

Acked-by: Stefan Schmidt stefan@datenfreihafen.org

regards Stefan Schmidt