Document at91sam9g45-ehci compatible for usb-ehci.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 1 + 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 9445764bd8de..7e486cc6cfb8 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -66,6 +66,7 @@ properties: - const: generic-ehci - items: - enum: + - atmel,at91sam9g45-ehci - cavium,octeon-6335-ehci - ibm,usb-ehci-440epx - ibm,usb-ehci-460ex

Document the property clock-names in the schema.

It fixes the dtbs_check warning, 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 7e486cc6cfb8..542ac26960fc 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -102,6 +102,10 @@ properties: - if a USB DRD channel: first clock should be host and second one should be peripheral

+ clock-names: + minItems: 1 + maxItems: 4 + power-domains: maxItems: 1

Add documentation for sam9x7 ethernet interface.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- Documentation/devicetree/bindings/net/cdns,macb.yaml | 1 + 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index bef5e0f895be..e4f9e9b353e5 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -54,6 +54,7 @@ properties: - cdns,np4-macb # NP4 SoC devices - microchip,sama7g5-emac # Microchip SAMA7G5 ethernet interface - microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface + - microchip,sam9x7-gem # Microchip SAM9X7 gigabit ethernet interface - sifive,fu540-c000-gem # SiFive FU540-C000 SoC - cdns,emac # Generic - cdns,gem # Generic

Add support and pm init config for sam9x7 SoC.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- arch/arm/mach-at91/generic.h | 2 ++ arch/arm/mach-at91/pm.c | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)

diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0c3960a8b3eb..acf0b3c82a30 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -12,6 +12,7 @@ extern void __init at91rm9200_pm_init(void); extern void __init at91sam9_pm_init(void); extern void __init sam9x60_pm_init(void); +extern void __init sam9x7_pm_init(void); extern void __init sama5_pm_init(void); extern void __init sama5d2_pm_init(void); extern void __init sama7_pm_init(void); @@ -19,6 +20,7 @@ extern void __init sama7_pm_init(void); static inline void __init at91rm9200_pm_init(void) { } static inline void __init at91sam9_pm_init(void) { } static inline void __init sam9x60_pm_init(void) { } +static inline void __init sam9x7_pm_init(void) { } static inline void __init sama5_pm_init(void) { } static inline void __init sama5d2_pm_init(void) { } static inline void __init sama7_pm_init(void) { } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 60dc56d8acfb..43a77ae0c38c 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -232,6 +232,17 @@ static const struct of_device_id sama7g5_ws_ids[] = { { /* sentinel */ } };

+static const struct of_device_id sam9x7_ws_ids[] = { + { .compatible = "microchip,sam9x60-rtc", .data = &ws_info[1] }, + { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, + { .compatible = "usb-ohci", .data = &ws_info[2] }, + { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, + { .compatible = "usb-ehci", .data = &ws_info[2] }, + { .compatible = "microchip,sam9x60-rtt", .data = &ws_info[4] }, + { .compatible = "microchip,sam9x7-gem", .data = &ws_info[5] }, + { /* sentinel */ } +}; + static int at91_pm_config_ws(unsigned int pm_mode, bool set) { const struct wakeup_source_info *wsi; @@ -1133,6 +1144,7 @@ static const struct of_device_id gmac_ids[] __initconst = { { .compatible = "atmel,sama5d2-gem" }, { .compatible = "atmel,sama5d29-gem" }, { .compatible = "microchip,sama7g5-gem" }, + { .compatible = "microchip,sam9x7-gem" }, { }, };

@@ -1360,6 +1372,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = { { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] }, { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] }, { .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] }, + { .compatible = "microchip,sam9x7-pmc", .data = &pmc_infos[4] }, { /* sentinel */ }, };

@@ -1497,6 +1510,28 @@ void __init sam9x60_pm_init(void) soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; }

+void __init sam9x7_pm_init(void) +{ + static const int modes[] __initconst = { + AT91_PM_STANDBY, AT91_PM_ULP0, + }; + + int ret; + + if (!IS_ENABLED(CONFIG_SOC_SAM9X7)) + return; + + at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); + ret = at91_dt_ramc(false); + if (ret) + return; + + at91_pm_init(NULL); + + soc_pm.ws_ids = sam9x7_ws_ids; + soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; +} + void __init at91sam9_pm_init(void) { int ret;

Add support for SAM9X7 SoC in the SoC driver.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- drivers/soc/atmel/soc.c | 23 +++++++++++++++++++++++ drivers/soc/atmel/soc.h | 9 +++++++++ 2 files changed, 32 insertions(+)

diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c index cc9a3e107479..cae3452cbc60 100644 --- a/drivers/soc/atmel/soc.c +++ b/drivers/soc/atmel/soc.c @@ -101,6 +101,29 @@ static const struct at91_soc socs[] __initconst = { AT91_CIDR_VERSION_MASK, SAM9X60_D6K_EXID_MATCH, "sam9x60 8MiB SDRAM SiP", "sam9x60"), #endif +#ifdef CONFIG_SOC_SAM9X7 + AT91_SOC(SAM9X7_CIDR_MATCH, AT91_CIDR_MATCH_MASK, + AT91_CIDR_VERSION_MASK, SAM9X75_EXID_MATCH, + "sam9x75", "sam9x7"), + AT91_SOC(SAM9X7_CIDR_MATCH, AT91_CIDR_MATCH_MASK, + AT91_CIDR_VERSION_MASK, SAM9X72_EXID_MATCH, + "sam9x72", "sam9x7"), + AT91_SOC(SAM9X7_CIDR_MATCH, AT91_CIDR_MATCH_MASK, + AT91_CIDR_VERSION_MASK, SAM9X70_EXID_MATCH, + "sam9x70", "sam9x7"), + AT91_SOC(SAM9X7_CIDR_MATCH, SAM9X75_D1G_EXID_MATCH, + AT91_CIDR_VERSION_MASK, SAM9X75_EXID_MATCH, + "sam9x75 1Gb DDR3L SiP ", "sam9x7"), + AT91_SOC(SAM9X7_CIDR_MATCH, SAM9X75_D5M_EXID_MATCH, + AT91_CIDR_VERSION_MASK, SAM9X75_EXID_MATCH, + "sam9x75 512Mb DDR2 SiP", "sam9x7"), + AT91_SOC(SAM9X7_CIDR_MATCH, SAM9X75_D1M_EXID_MATCH, + AT91_CIDR_VERSION_MASK, SAM9X75_EXID_MATCH, + "sam9x75 128Mb DDR2 SiP", "sam9x7"), + AT91_SOC(SAM9X7_CIDR_MATCH, SAM9X75_D2G_EXID_MATCH, + AT91_CIDR_VERSION_MASK, SAM9X75_EXID_MATCH, + "sam9x75 2Gb DDR3L SiP", "sam9x7"), +#endif #ifdef CONFIG_SOC_SAMA5 AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK, AT91_CIDR_VERSION_MASK, SAMA5D21CU_EXID_MATCH, diff --git a/drivers/soc/atmel/soc.h b/drivers/soc/atmel/soc.h index 7a9f47ce85fb..26dd26b4f179 100644 --- a/drivers/soc/atmel/soc.h +++ b/drivers/soc/atmel/soc.h @@ -45,6 +45,7 @@ at91_soc_init(const struct at91_soc *socs); #define AT91SAM9N12_CIDR_MATCH 0x019a07a0 #define SAM9X60_CIDR_MATCH 0x019b35a0 #define SAMA7G5_CIDR_MATCH 0x00162100 +#define SAM9X7_CIDR_MATCH 0x09750020

#define AT91SAM9M11_EXID_MATCH 0x00000001 #define AT91SAM9M10_EXID_MATCH 0x00000002 @@ -74,6 +75,14 @@ at91_soc_init(const struct at91_soc *socs); #define SAMA7G54_D2G_EXID_MATCH 0x00000020 #define SAMA7G54_D4G_EXID_MATCH 0x00000028

+#define SAM9X75_EXID_MATCH 0x00000000 +#define SAM9X72_EXID_MATCH 0x00000004 +#define SAM9X70_EXID_MATCH 0x00000005 +#define SAM9X75_D1G_EXID_MATCH 0x00000001 +#define SAM9X75_D5M_EXID_MATCH 0x00000002 +#define SAM9X75_D1M_EXID_MATCH 0x00000003 +#define SAM9X75_D2G_EXID_MATCH 0x00000006 + #define AT91SAM9XE128_CIDR_MATCH 0x329973a0 #define AT91SAM9XE256_CIDR_MATCH 0x329a93a0 #define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0

Add support for hardware dividers for PLL IDs in sam9x7 SoC. The system PLL - PLLA and the system PLL divided by 2 - PLLADIV2 with PLL ID 0 and 4 respectively, both have a hardware divider /2. This has to taken into account in the software to obtain the right frequencies. Support for the same is added in the PLL driver.

fcorepllack -----> HW Div = 2 -+--> fpllack | +--> HW Div = 2 ---> fplladiv2ck

In this case the corepll freq is 1600 MHz. So, the plla freq is 800 MHz after the hardware divider and the plladiv2 freq is 400 MHz after the hardware divider (Given that the DIVPMC is 0).

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- drivers/clk/at91/clk-sam9x60-pll.c | 38 ++++++++++++++++++++++++++---- drivers/clk/at91/pmc.h | 1 + 2 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c index b3012641214c..76273ea74f8b 100644 --- a/drivers/clk/at91/clk-sam9x60-pll.c +++ b/drivers/clk/at91/clk-sam9x60-pll.c @@ -73,9 +73,15 @@ static unsigned long sam9x60_frac_pll_recalc_rate(struct clk_hw *hw, { struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw); struct sam9x60_frac *frac = to_sam9x60_frac(core); + unsigned long freq;

- return parent_rate * (frac->mul + 1) + + freq = parent_rate * (frac->mul + 1) + DIV_ROUND_CLOSEST_ULL((u64)parent_rate * frac->frac, (1 << 22)); + + if (core->layout->div2) + freq >>= 1; + + return freq; }

static int sam9x60_frac_pll_set(struct sam9x60_pll_core *core) @@ -432,6 +438,12 @@ static unsigned long sam9x60_div_pll_recalc_rate(struct clk_hw *hw, return DIV_ROUND_CLOSEST_ULL(parent_rate, (div->div + 1)); }

+static unsigned long sam9x60_fixed_div_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return parent_rate >> 1; +} + static long sam9x60_div_pll_compute_div(struct sam9x60_pll_core *core, unsigned long *parent_rate, unsigned long rate) @@ -606,6 +618,16 @@ static const struct clk_ops sam9x60_div_pll_ops_chg = { .restore_context = sam9x60_div_pll_restore_context, };

+static const struct clk_ops sam9x60_fixed_div_pll_ops = { + .prepare = sam9x60_div_pll_prepare, + .unprepare = sam9x60_div_pll_unprepare, + .is_prepared = sam9x60_div_pll_is_prepared, + .recalc_rate = sam9x60_fixed_div_pll_recalc_rate, + .round_rate = sam9x60_div_pll_round_rate, + .save_context = sam9x60_div_pll_save_context, + .restore_context = sam9x60_div_pll_restore_context, +}; + struct clk_hw * __init sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock, const char *name, const char *parent_name, @@ -718,10 +740,16 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock, init.name = name; init.parent_names = &parent_name; init.num_parents = 1; - if (flags & CLK_SET_RATE_GATE) - init.ops = &sam9x60_div_pll_ops; - else - init.ops = &sam9x60_div_pll_ops_chg; + + if (layout->div2) { + init.ops = &sam9x60_fixed_div_pll_ops; + } else { + if (flags & CLK_SET_RATE_GATE) + init.ops = &sam9x60_div_pll_ops; + else + init.ops = &sam9x60_div_pll_ops_chg; + } + init.flags = flags;

div->core.id = id; diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h index 3e36dcc464c1..1dd01f30bdee 100644 --- a/drivers/clk/at91/pmc.h +++ b/drivers/clk/at91/pmc.h @@ -64,6 +64,7 @@ struct clk_pll_layout { u8 frac_shift; u8 div_shift; u8 endiv_shift; + u8 div2; };

extern const struct clk_pll_layout at91rm9200_pll_layout;

Add bindings for SAM9X7's slow clock controller and pmc.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- Documentation/devicetree/bindings/clock/at91-clock.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index 13f45db3b66d..446937fab950 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -10,8 +10,9 @@ Required properties: - compatible : shall be one of the following: "atmel,at91sam9x5-sckc", "atmel,sama5d3-sckc", - "atmel,sama5d4-sckc" or - "microchip,sam9x60-sckc": + "atmel,sama5d4-sckc", + "microchip,sam9x60-sckc" or + "microchip,sam9x7-sckc": at91 SCKC (Slow Clock Controller) - #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0. - clocks : shall be the input parent clock phandle for the clock. @@ -32,7 +33,7 @@ Power Management Controller (PMC):

Required properties: - compatible : shall be "atmel,<chip>-pmc", "syscon" or - "microchip,sam9x60-pmc" + "microchip,sam9x60-pmc" or "microchip,sam9x7-pmc" <chip> can be: at91rm9200, at91sam9260, at91sam9261, at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15, at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,

Add sam9x7 bindings.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- Documentation/devicetree/bindings/usb/atmel-usb.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 12183ef47ee4..6359af0123bf 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -3,8 +3,8 @@ Atmel SOC USB controllers OHCI

Required properties: - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers - used in host mode. + - compatible: Should be "atmel,at91rm9200-ohci" or "microchip,sam9x7-ohci" + for USB controllers used in host mode. - reg: Address and length of the register set for the device - interrupts: Should contain ohci interrupt - clocks: Should reference the peripheral, host and system clocks @@ -30,8 +30,8 @@ usb0: ohci@500000 { EHCI

Required properties: - - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers - used in host mode. + - compatible: Should be "atmel,at91sam9g45-ehci" or "microchip,sam9x7-ehci" + for USB controllers used in host mode. - reg: Address and length of the register set for the device - interrupts: Should contain ehci interrupt - clocks: Should reference the peripheral and the UTMI clocks @@ -87,6 +87,7 @@ Required properties: "atmel,at91sam9g45-udc" "atmel,sama5d3-udc" "microchip,sam9x60-udc" + "microchip,sam9x7-udc" "microchip,lan9662-udc" For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc" is required.

From: Hari Prasath Hari.PrasathGE@microchip.com

Add support for the Advanced interrupt controller(AIC) chip in the sam9x7.

Signed-off-by: Hari Prasath Hari.PrasathGE@microchip.com Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- drivers/irqchip/irq-atmel-aic5.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/drivers/irqchip/irq-atmel-aic5.c b/drivers/irqchip/irq-atmel-aic5.c index 145535bd7560..bab11900f3ef 100644 --- a/drivers/irqchip/irq-atmel-aic5.c +++ b/drivers/irqchip/irq-atmel-aic5.c @@ -320,6 +320,7 @@ static const struct of_device_id aic5_irq_fixups[] __initconst = { { .compatible = "atmel,sama5d3", .data = sama5d3_aic_irq_fixup }, { .compatible = "atmel,sama5d4", .data = sama5d3_aic_irq_fixup }, { .compatible = "microchip,sam9x60", .data = sam9x60_aic_irq_fixup }, + { .compatible = "microchip,sam9x7", .data = sam9x60_aic_irq_fixup }, { /* sentinel */ }, };

@@ -406,3 +407,12 @@ static int __init sam9x60_aic5_of_init(struct device_node *node, return aic5_of_init(node, parent, NR_SAM9X60_IRQS); } IRQCHIP_DECLARE(sam9x60_aic5, "microchip,sam9x60-aic", sam9x60_aic5_of_init); + +#define NR_SAM9X7_IRQS 70 + +static int __init sam9x7_aic5_of_init(struct device_node *node, + struct device_node *parent) +{ + return aic5_of_init(node, parent, NR_SAM9X7_IRQS); +} +IRQCHIP_DECLARE(sam9x7_aic5, "microchip,sam9x7-aic", sam9x7_aic5_of_init);

Add documentation for SAM9X75 Curiosity board.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- Documentation/devicetree/bindings/arm/atmel-at91.yaml | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index dfb8fd089197..15b11feae46a 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -99,6 +99,12 @@ properties: - const: microchip,sam9x60 - const: atmel,at91sam9

+ - description: Microchip SAM9X7 Evaluation Boards + items: + - const: microchip,sam9x75-curiosity + - const: microchip,sam9x7 + - const: atmel,at91sam9 + - description: Nattis v2 board with Natte v2 power board items: - const: axentia,nattis-2

Add compatible microchip,sam9x7-wdt to DT bindings documentation.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- .../devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml | 1 + 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml index 816f85ee2c77..216e64dfddb2 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml @@ -17,6 +17,7 @@ properties: enum: - atmel,sama5d4-wdt - microchip,sam9x60-wdt + - microchip,sam9x7-wdt - microchip,sama7g5-wdt

reg:

Add shutdown controller support for SAM9X7 SoC.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- drivers/power/reset/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 6c4ad81a0059..59459f5abbed 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -34,7 +34,7 @@ config POWER_RESET_AT91_RESET config POWER_RESET_AT91_SAMA5D2_SHDWC tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver" depends on ARCH_AT91 - default SOC_SAM9X60 || SOC_SAMA5 + default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 help This driver supports the alternate shutdown controller for some Atmel SAMA5 SoCs. It is present for example on SAMA5D2 SoC.

Enable config flags for SAM9X7 SoC for the sam9x7 SoC family.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- arch/arm/configs/at91_dt_defconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 82bcf4dc7f54..6266a000736b 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -15,6 +15,7 @@ CONFIG_ARCH_AT91=y CONFIG_SOC_AT91RM9200=y CONFIG_SOC_AT91SAM9=y CONFIG_SOC_SAM9X60=y +CONFIG_SOC_SAM9X7=y # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y

Add device tree file for SAM9X7 SoC family.

Co-developed-by: Nicolas Ferre nicolas.ferre@microchip.com Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- arch/arm/boot/dts/sam9x7.dtsi | 1237 +++++++++++++++++++++++++++++++++ 1 file changed, 1237 insertions(+) create mode 100644 arch/arm/boot/dts/sam9x7.dtsi

diff --git a/arch/arm/boot/dts/sam9x7.dtsi b/arch/arm/boot/dts/sam9x7.dtsi new file mode 100644 index 000000000000..535a55f13dd0 --- /dev/null +++ b/arch/arm/boot/dts/sam9x7.dtsi @@ -0,0 +1,1237 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran varshini.rajendran@microchip.com + */ + +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Microchip SAM9X7 SoC"; + compatible = "microchip,sam9x7"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0>; + }; + }; + + clocks { + slow_xtal: clock-slowxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + main_xtal: clock-mainxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + sram: sram@300000 { + compatible = "mmio-sram"; + reg = <0x300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300000 0x10000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb0: gadget@500000 { + compatible = "microchip,sam9x7-udc", "microchip,sam9x60-udc"; + reg = <0x500000 0x100000>, + <0xf803c000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + clock-names = "pclk", "hclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; + assigned-clock-rates = <480000000>; + status = "disabled"; + }; + + ohci0: usb@600000 { + compatible = "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x600000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + ehci0: usb@700000 { + compatible = "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x700000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usb_clk", "ehci_clk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; + assigned-clock-rates = <480000000>; + status = "disabled"; + }; + + sdmmc0: sdio-host@80000000 { + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci"; + reg = <0x80000000 0x300>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 12>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + sdmmc1: sdio-host@90000000 { + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci"; + reg = <0x90000000 0x300>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flx4: flexcom@f0000000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0000000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0000000 0x800>; + status = "disabled"; + + uart4: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "microchip,sam9x7-spi", "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx5: flexcom@f0004000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0004000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0004000 0x800>; + status = "disabled"; + + uart5: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi5: spi@400 { + compatible = "microchip,sam9x7-spi", "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c5: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + dma0: dma-controller@f0008000 { + compatible = "microchip,sam9x7-dma", "microchip,sam9x60-dma", "atmel,sama5d4-dma"; + reg = <0xf0008000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + ssc: ssc@f0010000 { + compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; + clock-names = "pclk"; + status = "disabled"; + }; + + i2s: i2s@f001c000 { + compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + flx11: flexcom@f0020000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0020000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0020000 0x800>; + status = "disabled"; + + uart11: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c11: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx12: flexcom@f0024000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0024000 0x800>; + status = "disabled"; + + uart12: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(24))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c12: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(24))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + pit64b0: timer@f0028000 { + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xf0028000 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; + clock-names = "pclk", "gclk"; + }; + + sha: crypto@f002c000 { + compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha"; + reg = <0xf002c000 0x100>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "sha_clk"; + }; + + trng: rng@f0030000 { + compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng"; + reg = <0xf0030000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + status = "disabled"; + }; + + aes: crypto@f0034000 { + compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes"; + reg = <0xf0034000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + clock-names = "aes_clk"; + }; + + tdes: crypto@f0038000 { + compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes"; + reg = <0xf0038000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(30))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "tdes_clk"; + }; + + classd: classd@f003c000 { + compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd"; + reg = <0xf003c000 0x100>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + pit64b1: timer@f0040000 { + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xf0040000 0x100>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; + clock-names = "pclk", "gclk"; + }; + + can0: can@f8000000 { + compatible = "bosch,m_can"; + reg = <0xf8000000 0x100>, <0x300000 0x7800>; + reg-names = "m_can", "message_ram"; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0 + 68 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>; + assigned-clock-rates = <480000000>, <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "bosch,m_can"; + reg = <0xf8004000 0x100>, <0x300000 0xbc00>; + reg-names = "m_can", "message_ram"; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0 + 69 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>; + assigned-clock-rates = <480000000>, <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + tcb: timer@f8008000 { + compatible = "microchip,sam9x7-tcb","microchip,sam9x60-tcb", "simple-mfd", "syscon"; + reg = <0xf8008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>; + clock-names = "t0_clk", "slow_clk"; + status = "disabled"; + }; + + flx6: flexcom@f8010000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8010000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8010000 0x800>; + status = "disabled"; + + uart6: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c6: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx7: flexcom@f8014000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8014000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8014000 0x800>; + status = "disabled"; + + uart7: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c7: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx8: flexcom@f8018000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8018000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8018000 0x800>; + status = "disabled"; + + uart8: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c8: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx0: flexcom@f801c000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf801c000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf801c000 0x800>; + status = "disabled"; + + uart0: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi0: spi@400 { + compatible = "microchip,sam9x7-spi", "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx1: flexcom@f8020000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8020000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8020000 0x800>; + status = "disabled"; + + uart1: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi1: spi@400 { + compatible = "microchip,sam9x7-spi", "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx2: flexcom@f8024000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8024000 0x800>; + status = "disabled"; + + uart2: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "microchip,sam9x7-spi", "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx3: flexcom@f8028000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8028000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8028000 0x800>; + status = "disabled"; + + uart3: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + spi3: spi@400 { + compatible = "microchip,sam9x7-spi", "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + gmac: ethernet@f802c000 { + compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem" ; + reg = <0xf802c000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */ + 60 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */ + 61 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 2 */ + 62 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 3 */ + 63 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 4 */ + 64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */ + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 67>; + clock-names = "hclk", "pclk", "tsu_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 67>; + status = "disabled"; + }; + + flx9: flexcom@f8040000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8040000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8040000 0x800>; + status = "disabled"; + + uart9: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c9: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx10: flexcom@f8044000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8044000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8044000 0x800>; + status = "disabled"; + + uart10: serial@200 { + compatible = "microchip,sam9x7-usart", "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c10: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + sfr: sfr@f8050000 { + compatible = "microchip,sam9x7-sfr, microchip,sam9x60-sfr", "syscon"; + reg = <0xf8050000 0x100>; + }; + + matrix: matrix@ffffde00 { + compatible = "microchip,sam9x7-matrix", "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon"; + reg = <0xffffde00 0x200>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "microchip,sam9x7-pmecc", "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x300>, + <0xffffe600 0x100>; + }; + + mpddrc: mpddrc@ffffe800 { + compatible = "microchip,sam9x7-ddramc", "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; + reg = <0xffffe800 0x200>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>; + clock-names = "ddrck", "mpddr"; + }; + + smc: smc@ffffea00 { + compatible = "microchip,sam9x7-smc", "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x100>; + }; + + aic: interrupt-controller@fffff100 { + compatible = "microchip,sam9x7-aic"; + reg = <0xfffff100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + atmel,external-irqs = <31>; + }; + + dbgu: serial@fffff200 { + compatible = "microchip,sam9x7-dbgu", "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; + clock-names = "usart"; + status = "disabled"; + }; + + pinctrl: pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-mfd"; + ranges = <0xfffff400 0xfffff400 0x800>; + + /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */ + atmel,mux-mask = < + /* A B C D */ + 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000 /* pioA */ + 0x07ffffff 0x0805fe7f 0x01ff9f80 0x06078000 /* pioB */ + 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000 /* pioC */ + 0x00003fff 0x00003fe0 0x0000003f 0x00000000 /* pioD */ + >; + + pioA: gpio@fffff400 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + + pioB: gpio@fffff600 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <26>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; + }; + + pioC: gpio@fffff800 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; + }; + + pioD: gpio@fffffa00 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "microchip,sam9x7-pmc", "syscon"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + reset_controller: rstc@fffffe00 { + compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc"; + reg = <0xfffffe00 0x10>; + clocks = <&clk32k 0>; + }; + + shutdown_controller: shdwc@fffffe10 { + compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc"; + reg = <0xfffffe10 0x10>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + rtt: rtc@fffffe20 { + compatible = "microchip,sam9x7-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; + reg = <0xfffffe20 0x20>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + + clk32k: sckc@fffffe50 { + compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + gpbr: syscon@fffffe60 { + compatible = "microchip,sam9x7-gbpr", "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffe60 0x10>; + }; + + rtc: rtc@fffffea8 { + compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc"; + reg = <0xfffffea8 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + + watchdog: watchdog@ffffff80 { + compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt"; + reg = <0xffffff80 0x24>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + status = "disabled"; + }; + }; + }; +};

Add compatible for sam9x7.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- Documentation/devicetree/bindings/dma/atmel-xdma.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt index 510b7f25ba24..f672556ea715 100644 --- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt @@ -2,8 +2,8 @@

* XDMA Controller Required properties: -- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or - "microchip,sama7g5-dma". +- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma", + "microchip,sam9x7-dma" or "microchip,sama7g5-dma". - reg: Should contain DMA registers location and length. - interrupts: Should contain DMA interrupt. - #dma-cells: Must be <1>, used to represent the number of integer cells in

Document sam9x7 DT for flexcom.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- Documentation/devicetree/bindings/mfd/atmel-flexcom.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt index 9d837535637b..449e0af93a13 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt @@ -5,7 +5,7 @@ controller and an USART. Only one function can be used at a time and is chosen at boot time according to the device tree.

Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" +- compatible: Should be "atmel,sama5d2-flexcom" or "microchip,sam9x7-flexcom" - reg: Should be the offset/length value for Flexcom dedicated I/O registers (without USART, TWI or SPI registers). - clocks: Should be the Flexcom peripheral clock from PMC.

Add a driver for the PMC clocks of sam9x7 Soc family.

Signed-off-by: Varshini Rajendran varshini.rajendran@microchip.com --- drivers/clk/at91/Makefile | 1 + drivers/clk/at91/sam9x7.c | 942 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 943 insertions(+) create mode 100644 drivers/clk/at91/sam9x7.c

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile index 89061b85e7d2..8e3684ba2c74 100644 --- a/drivers/clk/at91/Makefile +++ b/drivers/clk/at91/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o dt-compat. obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o dt-compat.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o dt-compat.o obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o +obj-$(CONFIG_SOC_SAM9X7) += sam9x7.o obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o dt-compat.o obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o dt-compat.o obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o dt-compat.o diff --git a/drivers/clk/at91/sam9x7.c b/drivers/clk/at91/sam9x7.c new file mode 100644 index 000000000000..292ae51be568 --- /dev/null +++ b/drivers/clk/at91/sam9x7.c @@ -0,0 +1,942 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SAM9X7 PMC code. + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran varshini.rajendran@microchip.com + * + */ +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/mfd/syscon.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/at91.h> + +#include "pmc.h" + +static DEFINE_SPINLOCK(pmc_pll_lock); +static DEFINE_SPINLOCK(mck_lock); + +/** + * enum pll_ids - PLL clocks identifiers + * @PLL_ID_PLLA: PLLA identifier + * @PLL_ID_UPLL: UPLL identifier + * @PLL_ID_AUDIO: Audio PLL identifier + * @PLL_ID_LVDS: LVDS PLL identifier + * @PLL_ID_PLLA_DIV2: PLLA DIV2 identifier + * @PLL_ID_MAX: Max PLL Identifier + */ +enum pll_ids { + PLL_ID_PLLA, + PLL_ID_UPLL, + PLL_ID_AUDIO, + PLL_ID_LVDS, + PLL_ID_PLLA_DIV2, + PLL_ID_MAX, +}; + +/** + * enum pll_type - PLL type identifiers + * @PLL_TYPE_FRAC: fractional PLL identifier + * @PLL_TYPE_DIV: divider PLL identifier + */ +enum pll_type { + PLL_TYPE_FRAC, + PLL_TYPE_DIV, +}; + +static const struct clk_master_characteristics mck_characteristics = { + .output = { .min = 32000000, .max = 266666667 }, + .divisors = { 1, 2, 4, 3, 5}, + .have_div3_pres = 1, +}; + +static const struct clk_master_layout sam9x7_master_layout = { + .mask = 0x373, + .pres_shift = 4, + .offset = 0x28, +}; + +/* Fractional PLL core output range. */ +static const struct clk_range plla_core_outputs[] = { + { .min = 375000000, .max = 1600000000 }, +}; + +static const struct clk_range upll_core_outputs[] = { + { .min = 600000000, .max = 1200000000 }, +}; + +static const struct clk_range lvdspll_core_outputs[] = { + { .min = 400000000, .max = 800000000 }, +}; + +static const struct clk_range audiopll_core_outputs[] = { + { .min = 400000000, .max = 800000000 }, +}; + +static const struct clk_range plladiv2_core_outputs[] = { + { .min = 375000000, .max = 1600000000 }, +}; + +/* Fractional PLL output range. */ +static const struct clk_range plla_outputs[] = { + { .min = 732421, .max = 800000000 }, +}; + +static const struct clk_range upll_outputs[] = { + { .min = 300000000, .max = 600000000 }, +}; + +static const struct clk_range lvdspll_outputs[] = { + { .min = 10000000, .max = 800000000 }, +}; + +static const struct clk_range audiopll_outputs[] = { + { .min = 10000000, .max = 800000000 }, +}; + +static const struct clk_range plladiv2_outputs[] = { + { .min = 366210, .max = 400000000 }, +}; + +/* PLL characteristics. */ +static const struct clk_pll_characteristics plla_characteristics = { + .input = { .min = 20000000, .max = 50000000 }, + .num_output = ARRAY_SIZE(plla_outputs), + .output = plla_outputs, + .core_output = plla_core_outputs, +}; + +static const struct clk_pll_characteristics upll_characteristics = { + .input = { .min = 20000000, .max = 50000000 }, + .num_output = ARRAY_SIZE(upll_outputs), + .output = upll_outputs, + .core_output = upll_core_outputs, + .upll = true, +}; + +static const struct clk_pll_characteristics lvdspll_characteristics = { + .input = { .min = 20000000, .max = 50000000 }, + .num_output = ARRAY_SIZE(lvdspll_outputs), + .output = lvdspll_outputs, + .core_output = lvdspll_core_outputs, +}; + +static const struct clk_pll_characteristics audiopll_characteristics = { + .input = { .min = 20000000, .max = 50000000 }, + .num_output = ARRAY_SIZE(audiopll_outputs), + .output = audiopll_outputs, + .core_output = audiopll_core_outputs, +}; + +static const struct clk_pll_characteristics plladiv2_characteristics = { + .input = { .min = 20000000, .max = 50000000 }, + .num_output = ARRAY_SIZE(plladiv2_outputs), + .output = plladiv2_outputs, + .core_output = plladiv2_core_outputs, +}; + +/* Layout for fractional PLL ID PLLA. */ +static const struct clk_pll_layout plla_frac_layout = { + .mul_mask = GENMASK(31, 24), + .frac_mask = GENMASK(21, 0), + .mul_shift = 24, + .frac_shift = 0, + .div2 = 1, +}; + +/* Layout for fractional PLLs. */ +static const struct clk_pll_layout pll_frac_layout = { + .mul_mask = GENMASK(31, 24), + .frac_mask = GENMASK(21, 0), + .mul_shift = 24, + .frac_shift = 0, +}; + +/* Layout for DIV PLLs. */ +static const struct clk_pll_layout pll_divpmc_layout = { + .div_mask = GENMASK(7, 0), + .endiv_mask = BIT(29), + .div_shift = 0, + .endiv_shift = 29, +}; + +/* Layout for DIV PLL ID PLLADIV2. */ +static const struct clk_pll_layout plladiv2_divpmc_layout = { + .div_mask = GENMASK(7, 0), + .endiv_mask = BIT(29), + .div_shift = 0, + .endiv_shift = 29, + .div2 = 1, +}; + +/* Layout for DIVIO dividers. */ +static const struct clk_pll_layout pll_divio_layout = { + .div_mask = GENMASK(19, 12), + .endiv_mask = BIT(30), + .div_shift = 12, + .endiv_shift = 30, +}; + +/* + * PLL clocks description + * @n: clock name + * @p: clock parent + * @l: clock layout + * @t: clock type + * @c: pll characteristics + * @f: true if clock is critical and cannot be disabled + * @eid: export index in sam9x7->chws[] array + */ +static const struct { + const char *n; + const char *p; + const struct clk_pll_layout *l; + u8 t; + const struct clk_pll_characteristics *c; + unsigned long f; + u8 eid; +} sam9x7_plls[][PLL_ID_MAX] = { + [PLL_ID_PLLA] = { + { + .n = "plla_fracck", + .p = "mainck", + .l = &plla_frac_layout, + .t = PLL_TYPE_FRAC, + /* + * This feeds plla_divpmcck which feeds CPU. It should + * not be disabled. + */ + .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, + .c = &plla_characteristics, + }, + + { + .n = "plla_divpmcck", + .p = "plla_fracck", + .l = &pll_divpmc_layout, + .t = PLL_TYPE_DIV, + /* This feeds CPU. It should not be disabled */ + .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, + .eid = PMC_PLLACK, + .c = &plla_characteristics, + }, + }, + + [PLL_ID_UPLL] = { + { + .n = "upll_fracck", + .p = "main_osc", + .l = &pll_frac_layout, + .t = PLL_TYPE_FRAC, + .f = CLK_SET_RATE_GATE, + .c = &upll_characteristics, + }, + + { + .n = "upll_divpmcck", + .p = "upll_fracck", + .l = &pll_divpmc_layout, + .t = PLL_TYPE_DIV, + .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | + CLK_SET_RATE_PARENT, + .eid = PMC_UTMI, + .c = &upll_characteristics, + }, + }, + + [PLL_ID_AUDIO] = { + { + .n = "audiopll_fracck", + .p = "main_osc", + .l = &pll_frac_layout, + .f = CLK_SET_RATE_GATE, + .c = &audiopll_characteristics, + .t = PLL_TYPE_FRAC, + }, + + { + .n = "audiopll_divpmcck", + .p = "audiopll_fracck", + .l = &pll_divpmc_layout, + .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | + CLK_SET_RATE_PARENT, + .c = &audiopll_characteristics, + .t = PLL_TYPE_DIV, + }, + + { + .n = "audiopll_diviock", + .p = "audiopll_fracck", + .l = &pll_divio_layout, + .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | + CLK_SET_RATE_PARENT, + .c = &audiopll_characteristics, + .t = PLL_TYPE_DIV, + }, + }, + + [PLL_ID_LVDS] = { + { + .n = "lvdspll_fracck", + .p = "main_osc", + .l = &pll_frac_layout, + .f = CLK_SET_RATE_GATE, + .c = &lvdspll_characteristics, + .t = PLL_TYPE_FRAC, + }, + + { + .n = "lvdspll_divpmcck", + .p = "lvdspll_fracck", + .l = &pll_divpmc_layout, + .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | + CLK_SET_RATE_PARENT, + .c = &lvdspll_characteristics, + .t = PLL_TYPE_DIV, + }, + }, + + [PLL_ID_PLLA_DIV2] = { + { + .n = "plla_div2pmcck", + .p = "plla_fracck", + .l = &plladiv2_divpmc_layout, + /* + * This may feed critical parts of the system like timers. + * It should not be disabled. + */ + .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, + .c = &plladiv2_characteristics, + .t = PLL_TYPE_DIV, + }, + }, +}; + +static const struct clk_programmable_layout sam9x7_programmable_layout = { + .pres_mask = 0xff, + .pres_shift = 8, + .css_mask = 0x1f, + .have_slck_mck = 0, + .is_pres_direct = 1, +}; + +static const struct clk_pcr_layout sam9x7_pcr_layout = { + .offset = 0x88, + .cmd = BIT(31), + .gckcss_mask = GENMASK(12, 8), + .pid_mask = GENMASK(6, 0), +}; + +static const struct { + char *n; + char *p; + u8 id; + unsigned long flags; +} sam9x7_systemck[] = { + /* + * ddrck feeds DDR controller and is enabled by bootloader thus we need + * to keep it enabled in case there is no Linux consumer for it. + */ + { .n = "ddrck", .p = "masterck_div", .id = 2, .flags = CLK_IS_CRITICAL }, + { .n = "uhpck", .p = "usbck", .id = 6 }, + { .n = "pck0", .p = "prog0", .id = 8 }, + { .n = "pck1", .p = "prog1", .id = 9 }, +}; + +/* + * Peripheral clocks description + * @n: clock name + * @f: true if clock is critical and cannot be disabled + * @id: peripheral id + */ +static const struct { + char *n; + unsigned long f; + u8 id; +} sam9x7_periphck[] = { + { .n = "pioA_clk", .id = 2, }, + { .n = "pioB_clk", .id = 3, }, + { .n = "pioC_clk", .id = 4, }, + { .n = "flex0_clk", .id = 5, }, + { .n = "flex1_clk", .id = 6, }, + { .n = "flex2_clk", .id = 7, }, + { .n = "flex3_clk", .id = 8, }, + { .n = "flex6_clk", .id = 9, }, + { .n = "flex7_clk", .id = 10, }, + { .n = "flex8_clk", .id = 11, }, + { .n = "sdmmc0_clk", .id = 12, }, + { .n = "flex4_clk", .id = 13, }, + { .n = "flex5_clk", .id = 14, }, + { .n = "flex9_clk", .id = 15, }, + { .n = "flex10_clk", .id = 16, }, + { .n = "tcb0_clk", .id = 17, }, + { .n = "pwm_clk", .id = 18, }, + { .n = "adc_clk", .id = 19, }, + { .n = "dma0_clk", .id = 20, }, + { .n = "uhphs_clk", .id = 22, }, + { .n = "udphs_clk", .id = 23, }, + { .n = "macb0_clk", .id = 24, }, + { .n = "lcd_clk", .id = 25, }, + { .n = "sdmmc1_clk", .id = 26, }, + { .n = "ssc_clk", .id = 28, }, + { .n = "can0_clk", .id = 29, }, + { .n = "can1_clk", .id = 30, }, + { .n = "flex11_clk", .id = 32, }, + { .n = "flex12_clk", .id = 33, }, + { .n = "i2s_clk", .id = 34, }, + { .n = "qspi_clk", .id = 35, }, + { .n = "gfx2d_clk", .id = 36, }, + { .n = "pit64b0_clk", .id = 37, }, + { .n = "trng_clk", .id = 38, }, + { .n = "aes_clk", .id = 39, }, + { .n = "tdes_clk", .id = 40, }, + { .n = "sha_clk", .id = 41, }, + { .n = "classd_clk", .id = 42, }, + { .n = "isi_clk", .id = 43, }, + { .n = "pioD_clk", .id = 44, }, + { .n = "tcb1_clk", .id = 45, }, + { .n = "dbgu_clk", .id = 47, }, + /* + * mpddr_clk feeds DDR controller and is enabled by bootloader thus we + * need to keep it enabled in case there is no Linux consumer for it. + */ + { .n = "mpddr_clk", .id = 49, .f = CLK_IS_CRITICAL }, + { .n = "csi2dc_clk", .id = 52, }, + { .n = "csi4l_clk", .id = 53, }, + { .n = "dsi4l_clk", .id = 54, }, + { .n = "lvdsc_clk", .id = 56, }, + { .n = "pit64b1_clk", .id = 58, }, + { .n = "puf_clk", .id = 59, }, + { .n = "gmactsu_clk", .id = 67, }, +}; + +/* + * Generic clock description + * @n: clock name + * @pp: PLL parents + * @pp_mux_table: PLL parents mux table + * @r: clock output range + * @pp_chg_id: id in parent array of changeable PLL parent + * @pp_count: PLL parents count + * @id: clock id + */ +static const struct { + const char *n; + const char *pp[8]; + const char pp_mux_table[8]; + struct clk_range r; + int pp_chg_id; + u8 pp_count; + u8 id; +} sam9x7_gck[] = { + { + .n = "flex0_gclk", + .id = 5, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex1_gclk", + .id = 6, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex2_gclk", + .id = 7, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex3_gclk", + .id = 8, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex6_gclk", + .id = 9, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex7_gclk", + .id = 10, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex8_gclk", + .id = 11, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "sdmmc0_gclk", + .id = 12, + .r = { .max = 105000000 }, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex4_gclk", + .id = 13, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex5_gclk", + .id = 14, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex9_gclk", + .id = 15, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex10_gclk", + .id = 16, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "tcb0_gclk", + .id = 17, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "adc_gclk", + .id = 19, + .pp = { "upll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 5, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "lcd_gclk", + .id = 25, + .r = { .max = 75000000 }, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "sdmmc1_gclk", + .id = 26, + .r = { .max = 105000000 }, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "mcan0_gclk", + .id = 29, + .r = { .max = 80000000 }, + .pp = { "upll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 5, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "mcan1_gclk", + .id = 30, + .r = { .max = 80000000 }, + .pp = { "upll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 5, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex11_gclk", + .id = 32, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "flex12_gclk", + .id = 33, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "i2s_gclk", + .id = 34, + .r = { .max = 100000000 }, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "qspi_gclk", + .id = 35, + .r = { .max = 20000000 }, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "pit64b0_gclk", + .id = 37, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "classd_gclk", + .id = 42, + .r = { .max = 100000000 }, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "tcb1_gclk", + .id = 45, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, + + { + .n = "dbgu_gclk", + .id = 47, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "mipiphy_gclk", + .id = 55, + .r = { .max = 27000000 }, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "pit64b1_gclk", + .id = 58, + .pp = { "plla_div2pmcck", }, + .pp_mux_table = { 8, }, + .pp_count = 1, + .pp_chg_id = INT_MIN, + }, + + { + .n = "gmac_gclk", + .id = 67, + .pp = { "audiopll_divpmcck", "plla_div2pmcck", }, + .pp_mux_table = { 6, 8, }, + .pp_count = 2, + .pp_chg_id = INT_MIN, + }, +}; + +static void __init sam9x7_pmc_setup(struct device_node *np) +{ + struct clk_range range = CLK_RANGE(0, 0); + const char *td_slck_name, *md_slck_name, *mainxtal_name; + struct pmc_data *sam9x7_pmc; + const char *parent_names[9]; + void **alloc_mem = NULL; + int alloc_mem_size = 0; + struct clk_hw *main_osc_hw; + struct regmap *regmap; + struct clk_hw *hw; + int i, j; + + i = of_property_match_string(np, "clock-names", "td_slck"); + if (i < 0) + return; + + td_slck_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "md_slck"); + if (i < 0) + return; + + md_slck_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "main_xtal"); + if (i < 0) + return; + mainxtal_name = of_clk_get_parent_name(np, i); + + regmap = device_node_to_regmap(np); + if (IS_ERR(regmap)) + return; + + sam9x7_pmc = pmc_data_allocate(PMC_PLLACK + 1, + nck(sam9x7_systemck), + nck(sam9x7_periphck), + nck(sam9x7_gck), 8); + if (!sam9x7_pmc) + return; + + alloc_mem = kmalloc(sizeof(void *) * + (ARRAY_SIZE(sam9x7_gck)), + GFP_KERNEL); + if (!alloc_mem) + goto err_free; + + hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000, + 50000000); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, 0); + if (IS_ERR(hw)) + goto err_free; + main_osc_hw = hw; + + parent_names[0] = "main_rc_osc"; + parent_names[1] = "main_osc"; + hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2); + if (IS_ERR(hw)) + goto err_free; + + sam9x7_pmc->chws[PMC_MAIN] = hw; + + for (i = 0; i < PLL_ID_MAX; i++) { + for (j = 0; j < 3; j++) { + struct clk_hw *parent_hw; + + if (!sam9x7_plls[i][j].n) + continue; + + switch (sam9x7_plls[i][j].t) { + case PLL_TYPE_FRAC: + if (!strcmp(sam9x7_plls[i][j].p, "mainck")) + parent_hw = sam9x7_pmc->chws[PMC_MAIN]; + else if (!strcmp(sam9x7_plls[i][j].p, "main_osc")) + parent_hw = main_osc_hw; + else + parent_hw = __clk_get_hw(of_clk_get_by_name + (np, sam9x7_plls[i][j].p)); + + hw = sam9x60_clk_register_frac_pll(regmap, + &pmc_pll_lock, + sam9x7_plls[i][j].n, + sam9x7_plls[i][j].p, + parent_hw, i, + sam9x7_plls[i][j].c, + sam9x7_plls[i][j].l, + sam9x7_plls[i][j].f); + break; + + case PLL_TYPE_DIV: + hw = sam9x60_clk_register_div_pll(regmap, + &pmc_pll_lock, + sam9x7_plls[i][j].n, + sam9x7_plls[i][j].p, i, + sam9x7_plls[i][j].c, + sam9x7_plls[i][j].l, + sam9x7_plls[i][j].f, 0); + break; + + default: + continue; + } + + if (IS_ERR(hw)) + goto err_free; + + if (sam9x7_plls[i][j].eid) + sam9x7_pmc->chws[sam9x7_plls[i][j].eid] = hw; + } + } + + parent_names[0] = md_slck_name; + parent_names[1] = "mainck"; + parent_names[2] = "plla_divpmcck"; + parent_names[3] = "upll_divpmcck"; + hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4, + parent_names, &sam9x7_master_layout, + &mck_characteristics, &mck_lock); + if (IS_ERR(hw)) + goto err_free; + + hw = at91_clk_register_master_div(regmap, "masterck_div", + "masterck_pres", &sam9x7_master_layout, + &mck_characteristics, &mck_lock, + CLK_SET_RATE_GATE, 0); + if (IS_ERR(hw)) + goto err_free; + + sam9x7_pmc->chws[PMC_MCK] = hw; + + parent_names[0] = "plla_divpmcck"; + parent_names[1] = "upll_divpmcck"; + parent_names[2] = "main_osc"; + hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 3); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = md_slck_name; + parent_names[1] = td_slck_name; + parent_names[2] = "mainck"; + parent_names[3] = "masterck_div"; + parent_names[4] = "plla_divpmcck"; + parent_names[5] = "upll_divpmcck"; + parent_names[6] = "audiopll_divpmcck"; + for (i = 0; i < 2; i++) { + char name[6]; + + snprintf(name, sizeof(name), "prog%d", i); + + hw = at91_clk_register_programmable(regmap, name, + parent_names, 7, i, + &sam9x7_programmable_layout, + NULL); + if (IS_ERR(hw)) + goto err_free; + + sam9x7_pmc->pchws[i] = hw; + } + + for (i = 0; i < ARRAY_SIZE(sam9x7_systemck); i++) { + hw = at91_clk_register_system(regmap, sam9x7_systemck[i].n, + sam9x7_systemck[i].p, + sam9x7_systemck[i].id, + sam9x7_systemck[i].flags); + if (IS_ERR(hw)) + goto err_free; + + sam9x7_pmc->shws[sam9x7_systemck[i].id] = hw; + } + + for (i = 0; i < ARRAY_SIZE(sam9x7_periphck); i++) { + hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &sam9x7_pcr_layout, + sam9x7_periphck[i].n, + "masterck_div", + sam9x7_periphck[i].id, + &range, INT_MIN, + sam9x7_periphck[i].f); + if (IS_ERR(hw)) + goto err_free; + + sam9x7_pmc->phws[sam9x7_periphck[i].id] = hw; + } + + parent_names[0] = md_slck_name; + parent_names[1] = td_slck_name; + parent_names[2] = "mainck"; + parent_names[3] = "masterck_div"; + for (i = 0; i < ARRAY_SIZE(sam9x7_gck); i++) { + u8 num_parents = 4 + sam9x7_gck[i].pp_count; + u32 *mux_table; + + mux_table = kmalloc_array(num_parents, sizeof(*mux_table), + GFP_KERNEL); + if (!mux_table) + goto err_free; + + PMC_INIT_TABLE(mux_table, 4); + PMC_FILL_TABLE(&mux_table[4], sam9x7_gck[i].pp_mux_table, + sam9x7_gck[i].pp_count); + PMC_FILL_TABLE(&parent_names[4], sam9x7_gck[i].pp, + sam9x7_gck[i].pp_count); + + hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, + &sam9x7_pcr_layout, + sam9x7_gck[i].n, + parent_names, mux_table, + num_parents, + sam9x7_gck[i].id, + &sam9x7_gck[i].r, + sam9x7_gck[i].pp_chg_id); + if (IS_ERR(hw)) + goto err_free; + + sam9x7_pmc->ghws[sam9x7_gck[i].id] = hw; + alloc_mem[alloc_mem_size++] = mux_table; + } + + of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sam9x7_pmc); + kfree(alloc_mem); + + return; + +err_free: + if (alloc_mem) { + for (i = 0; i < alloc_mem_size; i++) + kfree(alloc_mem[i]); + kfree(alloc_mem); + } + kfree(sam9x7_pmc); +} + +/* Some clks are used for a clocksource */ +CLK_OF_DECLARE(sam9x7_pmc, "microchip,sam9x7-pmc", sam9x7_pmc_setup);