the :c:type shouldn't be used with structs with Sphinx 3, as the C domain there uses .. c:struct for structs.

As we have the automarkup extension, let's just get rid of all :c:type as a hole, as those will be automagically marked as such.

This solves a bunch of warnings with Sphinx 3, like those:

.../Documentation/sound/kernel-api/writing-an-alsa-driver.rst:490: WARNING: Unparseable C cross-reference: 'calling snd_card_free' Invalid C declaration: Expected end of definition. [error at 8] calling snd_card_free --------^ .../Documentation/sound/kernel-api/writing-an-alsa-driver.rst:3328: WARNING: Unparseable C cross-reference: 'snd_rawmidi_transmit*' Invalid C declaration: Expected end of definition. [error at 20] snd_rawmidi_transmit* --------------------^ .../Documentation/sound/kernel-api/writing-an-alsa-driver.rst:3928: WARNING: Unparseable C cross-reference: 'copy_from/to_user' Invalid C declaration: Expected end of definition. [error at 9] copy_from/to_user ---------^

Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org --- .../kernel-api/writing-an-alsa-driver.rst | 105 ++++++++---------- 1 file changed, 47 insertions(+), 58 deletions(-)

diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index aa9d5ab183d2..85d6e9c643ef 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -194,7 +194,7 @@ The minimum flow for PCI soundcards is as follows:

- create ``remove`` callback.

-- create a :c:type:`struct pci_driver <pci_driver>` structure +- create a struct pci_driver structure containing the three pointers above.

- create an ``init`` function just calling the @@ -487,7 +487,7 @@ The destructor, remove callback, simply releases the card instance. Then the ALSA middle layer will release all the attached components automatically.

-It would be typically just :c:func:`calling snd_card_free()`: +It would be typically just calling :c:func:`snd_card_free()`:

::

@@ -560,16 +560,15 @@ return the card instance. The extra_size argument is used to allocate card->private_data for the chip-specific data. Note that these data are allocated by :c:func:`snd_card_new()`.

-The first argument, the pointer of struct :c:type:`struct device -<device>`, specifies the parent device. For PCI devices, typically -``&pci->`` is passed there. +The first argument, the pointer of struct device, specifies the parent +device. For PCI devices, typically ``&pci->`` is passed there.

Components ----------

After the card is created, you can attach the components (devices) to the card instance. In an ALSA driver, a component is represented as a -:c:type:`struct snd_device <snd_device>` object. A component +struct snd_device object. A component can be a PCM instance, a control interface, a raw MIDI interface, etc. Each such instance has one component entry.

@@ -628,7 +627,7 @@ argument of :c:func:`snd_card_new()`, i.e. err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE, sizeof(struct mychip), &card);

-:c:type:`struct mychip <mychip>` is the type of the chip record. +struct mychip is the type of the chip record.

In return, the allocated record can be accessed as

@@ -890,7 +889,7 @@ functions. These resources must be released in the destructor function (see below).

Now assume that the PCI device has an I/O port with 8 bytes and an -interrupt. Then :c:type:`struct mychip <mychip>` will have the +interrupt. Then struct mychip will have the following fields:

:: @@ -1094,7 +1093,7 @@ PCI Entries -----------

So far, so good. Let's finish the missing PCI stuff. At first, we need a -:c:type:`struct pci_device_id <pci_device_id>` table for +struct pci_device_id table for this chipset. It's a table of PCI vendor/device ID number, and some masks.

@@ -1110,19 +1109,17 @@ For example, }; MODULE_DEVICE_TABLE(pci, snd_mychip_ids);

-The first and second fields of the :c:type:`struct pci_device_id -<pci_device_id>` structure are the vendor and device IDs. If you -have no reason to filter the matching devices, you can leave the -remaining fields as above. The last field of the :c:type:`struct -pci_device_id <pci_device_id>` struct contains private data -for this entry. You can specify any value here, for example, to define -specific operations for supported device IDs. Such an example is found -in the intel8x0 driver. +The first and second fields of the struct pci_device_id are the vendor +and device IDs. If you have no reason to filter the matching devices, you can +leave the remaining fields as above. The last field of the +struct pci_device_id contains private data for this entry. You can specify +any value here, for example, to define specific operations for supported +device IDs. Such an example is found in the intel8x0 driver.

The last entry of this list is the terminator. You must specify this all-zero entry.

-Then, prepare the :c:type:`struct pci_driver <pci_driver>` +Then, prepare the struct pci_driver record:

:: @@ -1439,8 +1436,8 @@ corresponding argument. If a chip supports multiple playbacks or captures, you can specify more numbers, but they must be handled properly in open/close, etc. callbacks. When you need to know which substream you are referring to, -then it can be obtained from :c:type:`struct snd_pcm_substream -<snd_pcm_substream>` data passed to each callback as follows: +then it can be obtained from struct snd_pcm_substream data passed to each +callback as follows:

::

@@ -1639,10 +1636,9 @@ In the sections below, important records are explained. Hardware Description ~~~~~~~~~~~~~~~~~~~~

-The hardware descriptor (:c:type:`struct snd_pcm_hardware -<snd_pcm_hardware>`) contains the definitions of the fundamental -hardware configuration. Above all, you'll need to define this in the -`PCM open callback`_. Note that the runtime instance holds the copy of +The hardware descriptor (struct snd_pcm_hardware) contains the definitions of +the fundamental hardware configuration. Above all, you'll need to define this +in the `PCM open callback`_. Note that the runtime instance holds the copy of the descriptor, not the pointer to the existing descriptor. That is, in the open callback, you can modify the copied descriptor (``runtime->hw``) as you need. For example, if the maximum number of @@ -1800,14 +1796,13 @@ Running Status ~~~~~~~~~~~~~~

The running status can be referred via ``runtime->status``. This is -the pointer to the :c:type:`struct snd_pcm_mmap_status -<snd_pcm_mmap_status>` record. For example, you can get the current +the pointer to the struct snd_pcm_mmap_status record. +For example, you can get the current DMA hardware pointer via ``runtime->status->hw_ptr``.

The DMA application pointer can be referred via ``runtime->control``, -which points to the :c:type:`struct snd_pcm_mmap_control -<snd_pcm_mmap_control>` record. However, accessing directly to -this value is not recommended. +which points to the struct snd_pcm_mmap_control record. +However, accessing directly to this value is not recommended.

Private Data ~~~~~~~~~~~~ @@ -1843,8 +1838,8 @@ error number such as ``-EINVAL``. To choose an appropriate error number, it is advised to check what value other parts of the kernel return when the same kind of request fails.

-The callback function takes at least the argument with :c:type:`struct -snd_pcm_substream <snd_pcm_substream>` pointer. To retrieve the chip +The callback function takes at least the argument with +struct snd_pcm_substream pointer. To retrieve the chip record from the given substream instance, you can use the following macro.

@@ -2313,10 +2308,10 @@ non-atomic contexts. For example, the function :c:func:`snd_pcm_period_elapsed()` is called typically from the interrupt handler. But, if you set up the driver to use a threaded interrupt handler, this call can be in non-atomic context, too. In such -a case, you can set ``nonatomic`` filed of :c:type:`struct snd_pcm -<snd_pcm>` object after creating it. When this flag is set, mutex -and rwsem are used internally in the PCM core instead of spin and -rwlocks, so that you can call all PCM functions safely in a non-atomic +a case, you can set ``nonatomic`` filed of struct snd_pcm object +after creating it. When this flag is set, mutex and rwsem are used internally +in the PCM core instead of spin and rwlocks, so that you can call all PCM +functions safely in a non-atomic context.

Constraints @@ -2357,8 +2352,7 @@ There are many different constraints. Look at ``sound/pcm.h`` for a complete list. You can even define your own constraint rules. For example, let's suppose my_chip can manage a substream of 1 channel if and only if the format is ``S16_LE``, otherwise it supports any format -specified in the :c:type:`struct snd_pcm_hardware -<snd_pcm_hardware>` structure (or in any other +specified in struct snd_pcm_hardware> (or in any other constraint_list). You can build a rule like this:

:: @@ -2467,7 +2461,7 @@ Definition of Controls

To create a new control, you need to define the following three callbacks: ``info``, ``get`` and ``put``. Then, define a -:c:type:`struct snd_kcontrol_new <snd_kcontrol_new>` record, such as: +struct snd_kcontrol_new record, such as:

::

@@ -2602,8 +2596,8 @@ info callback ~~~~~~~~~~~~~

The ``info`` callback is used to get detailed information on this -control. This must store the values of the given :c:type:`struct -snd_ctl_elem_info <snd_ctl_elem_info>` object. For example, +control. This must store the values of the given +struct snd_ctl_elem_info object. For example, for a boolean control with a single element:

:: @@ -2774,13 +2768,11 @@ In the simplest way, you can do like this: if (err < 0) return err;

-where ``my_control`` is the :c:type:`struct snd_kcontrol_new -<snd_kcontrol_new>` object defined above, and chip is the object -pointer to be passed to kcontrol->private_data which can be referred -to in callbacks. +where ``my_control`` is the struct snd_kcontrol_new object defined above, +and chip is the object pointer to be passed to kcontrol->private_data which +can be referred to in callbacks.

-:c:func:`snd_ctl_new1()` allocates a new :c:type:`struct -snd_kcontrol <snd_kcontrol>` instance, and +:c:func:`snd_ctl_new1()` allocates a new struct snd_kcontrol instance, and :c:func:`snd_ctl_add()` assigns the given control component to the card.

@@ -2797,10 +2789,9 @@ can call :c:func:`snd_ctl_notify()`. For example, This function takes the card pointer, the event-mask, and the control id pointer for the notification. The event-mask specifies the types of notification, for example, in the above example, the change of control -values is notified. The id pointer is the pointer of :c:type:`struct -snd_ctl_elem_id <snd_ctl_elem_id>` to be notified. You can -find some examples in ``es1938.c`` or ``es1968.c`` for hardware volume -interrupts. +values is notified. The id pointer is the pointer of struct snd_ctl_elem_id +to be notified. You can find some examples in ``es1938.c`` or ``es1968.c`` +for hardware volume interrupts.

Metadata -------- @@ -2915,9 +2906,8 @@ with an ``ac97_bus_ops_t`` record with callback functions.

The bus record is shared among all belonging ac97 instances.

-And then call :c:func:`snd_ac97_mixer()` with an :c:type:`struct -snd_ac97_template <snd_ac97_template>` record together with -the bus pointer created above. +And then call :c:func:`snd_ac97_mixer()` with an struct snd_ac97_template +record together with the bus pointer created above.

::

@@ -3118,11 +3108,10 @@ devices on the card, set ``MPU401_INFO_IRQ_HOOK`` (see

Usually, the port address corresponds to the command port and port + 1 corresponds to the data port. If not, you may change the ``cport`` -field of :c:type:`struct snd_mpu401 <snd_mpu401>` manually afterward. -However, :c:type:`struct snd_mpu401 <snd_mpu401>` pointer is +field of struct snd_mpu401 manually afterward. +However, struct snd_mpu401 pointer is not returned explicitly by :c:func:`snd_mpu401_uart_new()`. You -need to cast ``rmidi->private_data`` to :c:type:`struct snd_mpu401 -<snd_mpu401>` explicitly, +need to cast ``rmidi->private_data`` to struct snd_mpu401 explicitly,

::

@@ -3772,7 +3761,7 @@ For creating the SG-buffer handler, call :c:func:`snd_pcm_set_managed_buffer_all()` with ``SNDRV_DMA_TYPE_DEV_SG`` in the PCM constructor like other PCI pre-allocator. You need to pass ``&pci->dev``, where pci is -the :c:type:`struct pci_dev <pci_dev>` pointer of the chip as +the struct pci_dev pointer of the chip as well.

::