The GX502 requires a few steps to enable the headset i/o: pincfg, verbs to enable and unmute the amp used for headpone out, and a jacksense callback to toggle output via internal or jack using a verb.

Signed-off-by: Luke D Jones luke@ljones.dev --- sound/pci/hda/patch_realtek.c | 65 +++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 29f5878f0c50..16009297f771 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5975,6 +5975,40 @@ static void alc_fixup_disable_mic_vref(struct hda_codec *codec, snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ); }

+ +static void alc294_gx502_toggle_output(struct hda_codec *codec, + struct hda_jack_callback *cb) +{ + /* The Windows driver sets the codec up in a very different way where + * it appears to leave 0x10 = 0x8a20 set. For Linux we need to toggle it + */ + if (snd_hda_jack_detect_state(codec, 0x21) == HDA_JACK_PRESENT) + alc_write_coef_idx(codec, 0x10, 0x8a20); + else + alc_write_coef_idx(codec, 0x10, 0x0a20); +} + +static void alc294_fixup_gx502_hp(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + /* Pin 0x21: headphones/headset mic */ + if (!is_jack_detectable(codec, 0x21)) + return; + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + snd_hda_jack_detect_enable_callback(codec, 0x21, + alc294_gx502_toggle_output); + break; + case HDA_FIXUP_ACT_INIT: + /* Make sure to start in a correct state, i.e. if + * headphones have been plugged in before powering up the system + */ + alc294_gx502_toggle_output(codec, NULL); + break; + } +} + static void alc285_fixup_hp_gpio_amp_init(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -6154,6 +6188,9 @@ enum { ALC285_FIXUP_THINKPAD_HEADSET_JACK, ALC294_FIXUP_ASUS_HPE, ALC294_FIXUP_ASUS_COEF_1B, + ALC294_FIXUP_ASUS_GX502_HP, + ALC294_FIXUP_ASUS_GX502_PINS, + ALC294_FIXUP_ASUS_GX502_VERBS, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED, @@ -7307,6 +7344,33 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC }, + [ALC294_FIXUP_ASUS_GX502_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x03a11050 }, /* front HP mic */ + { 0x1a, 0x01a11830 }, /* rear external mic */ + { 0x21, 0x03211020 }, /* front HP out */ + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_GX502_VERBS + }, + [ALC294_FIXUP_ASUS_GX502_VERBS] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* set 0x15 to HP-OUT ctrl */ + { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + /* unmute the 0x15 amp */ + { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 }, + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_GX502_HP + }, + [ALC294_FIXUP_ASUS_GX502_HP] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc294_fixup_gx502_hp, + }, [ALC294_FIXUP_ASUS_COEF_1B] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -7588,6 +7652,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC),