[alsa-devel] [PATCH v8 1/2] ASoC: hdac_hdmi: Fix to wait for D3 before powering off codec
Powering off codec immediately after sending D3 verb may not set the node to D3 state. So wait for a confirmation response before shutting down codec.
Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- sound/soc/codecs/hdac_hdmi.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 2445b43..aa953a5 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -1486,6 +1486,7 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) struct hdac_ext_device *edev = to_hda_ext_device(dev); struct hdac_device *hdac = &edev->hdac; struct hdac_bus *bus = hdac->bus; + unsigned long timeout; int err;
dev_dbg(dev, "Enter: %s\n", __func__); @@ -1495,10 +1496,19 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) return 0;
/* Power down afg */ - if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) + if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) { snd_hdac_codec_write(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+ /* Wait till power state is set to D3 */ + timeout = jiffies + msecs_to_jiffies(1000); + while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3) + && time_before(jiffies, timeout)) { + + msleep(50); + } + } + err = snd_hdac_display_power(bus, false); if (err < 0) { dev_err(bus->dev, "Cannot turn on display power on i915\n");
From: Jeeja KP jeeja.kp@intel.com
The codec registers are reset during S3. So need to reconfigure all pins and DP1.2 feature again after resume from S3. Also reprogram the required registers if the S3 was triggered during playback.
In suspended state ELD notify callback is not processed, So add ELD check for all pins as well.
Also turn the codec power domain OFF which is kept ON during controller resequencing and codec reenumeration.
Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- sound/soc/codecs/hdac_hdmi.c | 61 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index aa953a5..ab75b4b 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -601,6 +601,26 @@ static int hdac_hdmi_pcm_open(struct snd_pcm_substream *substream, pin->eld.eld_buffer); }
+static int hdac_hdmi_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct hdac_hdmi_dai_pin_map *dai_map; + struct hdac_ext_device *hdac = snd_soc_dai_get_drvdata(dai); + struct hdac_hdmi_priv *hdmi = hdac->private_data; + int ret; + + dai_map = &hdmi->dai_map[dai->id]; + if (cmd == SNDRV_PCM_TRIGGER_RESUME) { + ret = hdac_hdmi_enable_pin(hdac, dai_map); + if (ret < 0) + return ret; + + return hdac_hdmi_playback_prepare(substream, dai); + } + + return 0; +} + static void hdac_hdmi_pcm_close(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -1154,6 +1174,7 @@ static struct snd_soc_dai_ops hdmi_dai_ops = { .shutdown = hdac_hdmi_pcm_close, .hw_params = hdac_hdmi_set_hw_params, .prepare = hdac_hdmi_playback_prepare, + .trigger = hdac_hdmi_trigger, .hw_free = hdac_hdmi_playback_cleanup, };
@@ -1399,9 +1420,49 @@ static int hdmi_codec_remove(struct snd_soc_codec *codec) return 0; }
+#ifdef CONFIG_PM +static int hdmi_codec_resume(struct snd_soc_codec *codec) +{ + struct hdac_ext_device *edev = snd_soc_codec_get_drvdata(codec); + struct hdac_hdmi_priv *hdmi = edev->private_data; + struct hdac_hdmi_pin *pin; + struct hdac_device *hdac = &edev->hdac; + struct hdac_bus *bus = hdac->bus; + int err; + + hdac_hdmi_skl_enable_all_pins(&edev->hdac); + hdac_hdmi_skl_enable_dp12(&edev->hdac); + + /* Power up afg */ + if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)) + snd_hdac_codec_write(hdac, hdac->afg, 0, + AC_VERB_SET_POWER_STATE, AC_PWRST_D0); + + /* + * As the ELD notify callback request is not entertained while the + * device is in suspend state. Need to manually check detection of + * all pins here. + */ + list_for_each_entry(pin, &hdmi->pin_list, head) + hdac_hdmi_present_sense(pin, 1); + + /* Codec power is turned ON during controller resume */ + err = snd_hdac_display_power(bus, false); + if (err < 0) { + dev_err(bus->dev, "Cannot turn on display power on i915\n"); + return err; + } + + return 0; +} +#else +#define hdmi_codec_resume NULL +#endif + static struct snd_soc_codec_driver hdmi_hda_codec = { .probe = hdmi_codec_probe, .remove = hdmi_codec_remove, + .resume = hdmi_codec_resume, .idle_bias_off = true, };
On Sun, 21 Feb 2016 07:00:44 +0100, Subhransu S. Prusty wrote:
From: Jeeja KP jeeja.kp@intel.com
The codec registers are reset during S3. So need to reconfigure all pins and DP1.2 feature again after resume from S3. Also reprogram the required registers if the S3 was triggered during playback.
In suspended state ELD notify callback is not processed, So add ELD check for all pins as well.
Also turn the codec power domain OFF which is kept ON during controller resequencing and codec reenumeration.
Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com
sound/soc/codecs/hdac_hdmi.c | 61 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index aa953a5..ab75b4b 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -601,6 +601,26 @@ static int hdac_hdmi_pcm_open(struct snd_pcm_substream *substream, pin->eld.eld_buffer); }
+static int hdac_hdmi_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)+{
- struct hdac_hdmi_dai_pin_map *dai_map;
- struct hdac_ext_device *hdac = snd_soc_dai_get_drvdata(dai);
- struct hdac_hdmi_priv *hdmi = hdac->private_data;
- int ret;
- dai_map = &hdmi->dai_map[dai->id];
- if (cmd == SNDRV_PCM_TRIGGER_RESUME) {
ret = hdac_hdmi_enable_pin(hdac, dai_map);if (ret < 0)return ret;return hdac_hdmi_playback_prepare(substream, dai);- }
- return 0;
+}
static void hdac_hdmi_pcm_close(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -1154,6 +1174,7 @@ static struct snd_soc_dai_ops hdmi_dai_ops = { .shutdown = hdac_hdmi_pcm_close, .hw_params = hdac_hdmi_set_hw_params, .prepare = hdac_hdmi_playback_prepare,
- .trigger = hdac_hdmi_trigger, .hw_free = hdac_hdmi_playback_cleanup,
};
@@ -1399,9 +1420,49 @@ static int hdmi_codec_remove(struct snd_soc_codec *codec) return 0; }
+#ifdef CONFIG_PM +static int hdmi_codec_resume(struct snd_soc_codec *codec) +{
- struct hdac_ext_device *edev = snd_soc_codec_get_drvdata(codec);
- struct hdac_hdmi_priv *hdmi = edev->private_data;
- struct hdac_hdmi_pin *pin;
- struct hdac_device *hdac = &edev->hdac;
- struct hdac_bus *bus = hdac->bus;
- int err;
- hdac_hdmi_skl_enable_all_pins(&edev->hdac);
- hdac_hdmi_skl_enable_dp12(&edev->hdac);
- /* Power up afg */
- if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0))
snd_hdac_codec_write(hdac, hdac->afg, 0,AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
You don't have to wait for D0 power up unlike runtime resume?
- /*
* As the ELD notify callback request is not entertained while the* device is in suspend state. Need to manually check detection of* all pins here.*/- list_for_each_entry(pin, &hdmi->pin_list, head)
hdac_hdmi_present_sense(pin, 1);- /* Codec power is turned ON during controller resume */
- err = snd_hdac_display_power(bus, false);
- if (err < 0) {
dev_err(bus->dev, "Cannot turn on display power on i915\n");
Make clear whether you're turning on or off...
Takashi
+#ifdef CONFIG_PM +static int hdmi_codec_resume(struct snd_soc_codec *codec) +{
- struct hdac_ext_device *edev = snd_soc_codec_get_drvdata(codec);
- struct hdac_hdmi_priv *hdmi = edev->private_data;
- struct hdac_hdmi_pin *pin;
- struct hdac_device *hdac = &edev->hdac;
- struct hdac_bus *bus = hdac->bus;
- int err;
- hdac_hdmi_skl_enable_all_pins(&edev->hdac);
- hdac_hdmi_skl_enable_dp12(&edev->hdac);
- /* Power up afg */
- if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0))
snd_hdac_codec_write(hdac, hdac->afg, 0,AC_VERB_SET_POWER_STATE, AC_PWRST_D0);You don't have to wait for D0 power up unlike runtime resume?
Didn't see any issue yet. But yes, we should wait.
- /*
* As the ELD notify callback request is not entertained while the* device is in suspend state. Need to manually check detection of* all pins here.*/- list_for_each_entry(pin, &hdmi->pin_list, head)
hdac_hdmi_present_sense(pin, 1);- /* Codec power is turned ON during controller resume */
- err = snd_hdac_display_power(bus, false);
- if (err < 0) {
dev_err(bus->dev, "Cannot turn on display power on i915\n");Make clear whether you're turning on or off...
Will fix it.
Takashi
--
The patch
ASoC: hdac_hdmi: Fix to wait for D3 before powering off codec
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 7ed49700c4d6959dbfdf174023a57fc15a97c9ab Mon Sep 17 00:00:00 2001
From: "Subhransu S. Prusty" subhransu.s.prusty@intel.com Date: Mon, 22 Feb 2016 07:50:32 +0530 Subject: [PATCH] ASoC: hdac_hdmi: Fix to wait for D3 before powering off codec
Powering off codec immediately after sending D3 verb may not set the node to D3 state. So wait for a confirmation response before shutting down codec.
Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/hdac_hdmi.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 2445b4351efb..aa953a5b57d4 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -1486,6 +1486,7 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) struct hdac_ext_device *edev = to_hda_ext_device(dev); struct hdac_device *hdac = &edev->hdac; struct hdac_bus *bus = hdac->bus; + unsigned long timeout; int err;
dev_dbg(dev, "Enter: %s\n", __func__); @@ -1495,10 +1496,19 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) return 0;
/* Power down afg */ - if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) + if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) { snd_hdac_codec_write(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+ /* Wait till power state is set to D3 */ + timeout = jiffies + msecs_to_jiffies(1000); + while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3) + && time_before(jiffies, timeout)) { + + msleep(50); + } + } + err = snd_hdac_display_power(bus, false); if (err < 0) { dev_err(bus->dev, "Cannot turn on display power on i915\n");
participants (3)
-
Mark Brown -
Subhransu S. Prusty -
Takashi Iwai