[alsa-devel] SPDIF wave audio broken after BIOS update
Hello,
I've updated my system BIOS to fix some issues, however since then wave audio over (optical) SPDIF is broken, i.e. I can hear the receiver power up but only silence comes out. Audio on the analog jacks work, as does transmitting AC3/DTS data over spdif.
Attached is the codec#0 proc info for the non-working case, as well as a diff of this output between the (old) working and (new) broken bios.
Also, since the update, this message has reappeared (it went away after the sound tree merge early in the 2.6.36-rc phase):
hda_codec: ALC892: BIOS auto-probing. ALSA hda_codec.c:337: hda_codec: connection list not available for 0x1f
Thank you! Manuel Lauss
2.6.36-rc3, BIOS F7/F8b
Codec: Realtek ALC892 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0892 Subsystem Id: 0x1458a102 Revision Id: 0x100302 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC892 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled Non-Audio GenLevel Digital category: 0x2 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Switch", index=1, device=0 Control: name="Capture Volume", index=1, device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x90 0x90] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Switch", index=0, device=0 Control: name="Capture Volume", index=0, device=0 Device: name="ALC892 Analog", type="Audio", device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x9c 0x9c] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Enabled Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Surround Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Center Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=In, idx=0, ofs=0 Control: name="LFE Playback Switch", index=0, device=0 ControlAmp: chs=2, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x05 0x0b Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="ALC892 Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 Digital: Enabled Non-Audio GenLevel Digital category: 0x2 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x11 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x99430140: [Fixed] SPDIF Out at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x10 Node 0x12 [Pin Complex] wcaps 0x400401: Stereo Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000003e: IN OUT HP Detect Trigger Pin Default 0x01014410: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0c Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01011412: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0d Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01016411: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0e Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000036: IN OUT Detect Trigger Pin Default 0x01012414: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0x4 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Mic Boost", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003736: IN OUT Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x01a19c50: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x5, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Front Mic Boost", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02a19c60: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x6, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003736: IN OUT Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x0181345f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x5, Sequence = 0xf Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c* 0x0d 0x0e 0x0f 0x26 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000373e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 100 Pin Default 0x02214c20: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 0x0c 0x0d 0x0e 0x0f 0x26* Node 0x1c [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x593301f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x4005e601: [N/A] Line Out at Ext N/A Conn = Optical, Color = White DefAssociation = 0x0, Sequence = 0x1 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x014b6130: [Jack] SPDIF Out at Ext Rear Conn = Comb, Color = Orange DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital Pincap 0x00000024: IN Detect Pin Default 0x01cb7170: [Jack] SPDIF In at Ext Rear Conn = Comb, Color = Yellow DefAssociation = 0x7, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=24 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 12 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Input Source", index=1, device=0 Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x25 0x0b
--- alc892-old.txt 2010-09-23 13:20:19.651770502 +0200 +++ alc892-new.txt 2010-09-23 13:20:48.689282001 +0200 @@ -1,8 +1,8 @@ -2.6.35, BIOS F7b working +2.6.36-rc3, BIOS F7/F8b broken SPDIF wave audio
Codec: Realtek ALC892 Address: 0 -Function Id: 0x1 +AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0892 Subsystem Id: 0x1458a102 Revision Id: 0x100302 @@ -15,7 +15,7 @@ Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 - IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0f + IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 @@ -66,15 +66,9 @@ Node 0x05 [Audio Output] wcaps 0x41d: St Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital - Control: name="IEC958 Playback Con Mask", index=0, device=0 - Control: name="IEC958 Playback Pro Mask", index=0, device=0 - Control: name="IEC958 Playback Default", index=0, device=0 - Control: name="IEC958 Playback Switch", index=0, device=0 - Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 - Device: name="ALC892 Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 - Digital: Enabled - Digital category: 0x0 + Digital: Enabled Non-Audio GenLevel + Digital category: 0x2 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 @@ -116,7 +110,7 @@ Node 0x09 [Audio Input] wcaps 0x10051b: Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 - Digital: + Digital: Enabled Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 @@ -140,7 +134,7 @@ Node 0x0b [Audio Mixer] wcaps 0x20010b: Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 - Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] Connection: 10 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In @@ -168,13 +162,19 @@ Node 0x0e [Audio Mixer] wcaps 0x20010b: 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-In vals: [0x00 0x00] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x05 0x0b Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital + Control: name="IEC958 Playback Con Mask", index=0, device=0 + Control: name="IEC958 Playback Pro Mask", index=0, device=0 + Control: name="IEC958 Playback Default", index=0, device=0 + Control: name="IEC958 Playback Switch", index=0, device=0 + Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 + Device: name="ALC892 Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 - Digital: - Digital category: 0x0 + Digital: Enabled Non-Audio GenLevel + Digital category: 0x2 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 @@ -187,7 +187,7 @@ Node 0x11 [Pin Complex] wcaps 0x400781: Conn = ATAPI, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x00: + Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 @@ -324,7 +324,7 @@ Node 0x1b [Pin Complex] wcaps 0x40058f: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 5 - 0x0c* 0x0d 0x0e 0x0f 0x26 + 0x0c 0x0d 0x0e 0x0f 0x26* Node 0x1c [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x593301f0: [N/A] CD at Int ATAPI @@ -340,7 +340,7 @@ Node 0x1d [Pin Complex] wcaps 0x400400: Pin Default 0x4005e601: [N/A] Line Out at Ext N/A Conn = Optical, Color = White DefAssociation = 0x0, Sequence = 0x1 - Pin-ctls: 0x00: + Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital @@ -349,7 +349,7 @@ Node 0x1e [Pin Complex] wcaps 0x400781: Conn = Comb, Color = Orange DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x00: + Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 @@ -361,7 +361,7 @@ Node 0x1f [Pin Complex] wcaps 0x400681: Conn = Comb, Color = Yellow DefAssociation = 0x7, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x00: + Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 @@ -393,6 +393,6 @@ Node 0x25 [Audio Output] wcaps 0x41d: St Power: setting=D0, actual=D0 Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-In vals: [0x00 0x00] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x25 0x0b
At Thu, 23 Sep 2010 14:10:45 +0200, Manuel Lauss wrote:
Hello,
I've updated my system BIOS to fix some issues, however since then wave audio over (optical) SPDIF is broken, i.e. I can hear the receiver power up but only silence comes out. Audio on the analog jacks work, as does transmitting AC3/DTS data over spdif.
Attached is the codec#0 proc info for the non-working case, as well as a diff of this output between the (old) working and (new) broken bios.
Looks like you set non-audio SPDIF bit accidentally as default. Thus it doesn't work but for pass-thru mode. Try to reset it via iecset utility.
Also, since the update, this message has reappeared (it went away after the sound tree merge early in the 2.6.36-rc phase):
hda_codec: ALC892: BIOS auto-probing. ALSA hda_codec.c:337: hda_codec: connection list not available for 0x1f
This shouldn't be a big problem, but for tracking more, I'd need alsa-info.sh output. Run with --no-upload option, and attach the output.
Takashi
On Fri, Sep 24, 2010 at 8:35 AM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 23 Sep 2010 14:10:45 +0200, Manuel Lauss wrote:
Hello,
I've updated my system BIOS to fix some issues, however since then wave audio over (optical) SPDIF is broken, i.e. I can hear the receiver power up but only silence comes out. Audio on the analog jacks work, as does transmitting AC3/DTS data over spdif.
Attached is the codec#0 proc info for the non-working case, as well as a diff of this output between the (old) working and (new) broken bios.
Looks like you set non-audio SPDIF bit accidentally as default. Thus it doesn't work but for pass-thru mode. Try to reset it via iecset utility.
That worked.
Also, since the update, this message has reappeared (it went away after the sound tree merge early in the 2.6.36-rc phase):
hda_codec: ALC892: BIOS auto-probing. ALSA hda_codec.c:337: hda_codec: connection list not available for 0x1f
This shouldn't be a big problem, but for tracking more, I'd need alsa-info.sh output. Run with --no-upload option, and attach the output.
Attached.
Thanks, Manuel Lauss
At Fri, 24 Sep 2010 08:51:43 +0200, Manuel Lauss wrote:
On Fri, Sep 24, 2010 at 8:35 AM, Takashi Iwai tiwai@suse.de wrote:
At Thu, 23 Sep 2010 14:10:45 +0200, Manuel Lauss wrote:
Hello,
I've updated my system BIOS to fix some issues, however since then wave audio over (optical) SPDIF is broken, i.e. I can hear the receiver power up but only silence comes out. Audio on the analog jacks work, as does transmitting AC3/DTS data over spdif.
Attached is the codec#0 proc info for the non-working case, as well as a diff of this output between the (old) working and (new) broken bios.
Looks like you set non-audio SPDIF bit accidentally as default. Thus it doesn't work but for pass-thru mode. Try to reset it via iecset utility.
That worked.
Also, since the update, this message has reappeared (it went away after the sound tree merge early in the 2.6.36-rc phase):
hda_codec: ALC892: BIOS auto-probing. ALSA hda_codec.c:337: hda_codec: connection list not available for 0x1f
This shouldn't be a big problem, but for tracking more, I'd need alsa-info.sh output. Run with --no-upload option, and attach the output.
Attached.
Thanks, found out the problem. The fixed patch is below. I updated the tree now.
Takashi
---
participants (2)
-
Manuel Lauss
-
Takashi Iwai