[PATCH 2/4] ASoC: rt1316-sdw: get BQ params property and apply them
From: Shuming Fan shumingf@realtek.com
If the machine driver level sets the BQ params into the device property, the codec driver will get the BQ params and apply them.
Signed-off-by: Shuming Fan shumingf@realtek.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/codecs/rt1316-sdw.c | 39 +++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt1316-sdw.h | 2 ++ 2 files changed, 41 insertions(+)
diff --git a/sound/soc/codecs/rt1316-sdw.c b/sound/soc/codecs/rt1316-sdw.c index ed0a11436362..2db7ee6c6d33 100644 --- a/sound/soc/codecs/rt1316-sdw.c +++ b/sound/soc/codecs/rt1316-sdw.c @@ -254,6 +254,17 @@ static int rt1316_read_prop(struct sdw_slave *slave) return 0; }
+static void rt1316_apply_bq_params(struct rt1316_sdw_priv *rt1316) +{ + unsigned int i, reg, data; + + for (i = 0; i < rt1316->bq_params_cnt; i += 3) { + reg = rt1316->bq_params[i] | (rt1316->bq_params[i + 1] << 8); + data = rt1316->bq_params[i + 2]; + regmap_write(rt1316->regmap, reg, data); + } +} + static int rt1316_io_init(struct device *dev, struct sdw_slave *slave) { struct rt1316_sdw_priv *rt1316 = dev_get_drvdata(dev); @@ -590,14 +601,42 @@ static struct sdw_slave_ops rt1316_slave_ops = { .update_status = rt1316_update_status, };
+static int rt1316_sdw_parse_dt(struct rt1316_sdw_priv *rt1316, struct device *dev) +{ + int ret = 0; + + device_property_read_u32(dev, "realtek,bq-params-cnt", &rt1316->bq_params_cnt); + if (rt1316->bq_params_cnt) { + rt1316->bq_params = devm_kzalloc(dev, rt1316->bq_params_cnt, GFP_KERNEL); + if (!rt1316->bq_params) { + dev_err(dev, "Could not allocate bq_params memory\n"); + ret = -ENOMEM; + } else { + ret = device_property_read_u8_array(dev, "realtek,bq-params", rt1316->bq_params, rt1316->bq_params_cnt); + if (ret < 0) + dev_err(dev, "Could not read list of realtek,bq-params\n"); + } + } + + dev_dbg(dev, "bq_params_cnt=%d\n", rt1316->bq_params_cnt); + return ret; +} + static int rt1316_sdw_component_probe(struct snd_soc_component *component) { + struct rt1316_sdw_priv *rt1316 = snd_soc_component_get_drvdata(component); int ret;
+ rt1316->component = component; + rt1316_sdw_parse_dt(rt1316, &rt1316->sdw_slave->dev); + ret = pm_runtime_resume(component->dev); if (ret < 0 && ret != -EACCES) return ret;
+ /* apply BQ params */ + rt1316_apply_bq_params(rt1316); + return 0; }
diff --git a/sound/soc/codecs/rt1316-sdw.h b/sound/soc/codecs/rt1316-sdw.h index cbcdaa8f8cfa..57dbd49993b0 100644 --- a/sound/soc/codecs/rt1316-sdw.h +++ b/sound/soc/codecs/rt1316-sdw.h @@ -46,6 +46,8 @@ struct rt1316_sdw_priv { struct sdw_bus_params params; bool hw_init; bool first_hw_init; + unsigned char *bq_params; + unsigned int bq_params_cnt; };
struct sdw_stream_data {
On Wed, 9 Nov 2022 17:12:44 +0800, shumingf@realtek.com wrote:
From: Shuming Fan shumingf@realtek.com
If the machine driver level sets the BQ params into the device property, the codec driver will get the BQ params and apply them.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[2/4] ASoC: rt1316-sdw: get BQ params property and apply them commit: 3c46b589db83db8a445924d0273005631a056aea
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Mark Brown
-
shumingf@realtek.com