[PATCH] ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()
Rear audio on Lenovo ThinkStation P620 stops working after commit 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620"): [ 6.013526] usbcore: registered new interface driver snd-usb-audio [ 6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
I overlooked the issue because when I was working on the said commit, only the front audio is tested. Apology for that.
Changing supports_autosuspend in driver is too late for disabling autosuspend, because it was already used by USB probe routine, so it can break the balance on the following code that depends on supports_autosuspend.
Fix it by using usb_disable_autosuspend() helper, and balance the suspend count in disconnect callback.
Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620") Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com --- sound/usb/card.c | 5 +++++ sound/usb/quirks.c | 2 +- sound/usb/usbaudio.h | 1 + 3 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/usb/card.c b/sound/usb/card.c index 85ed8507e41a..08c794883299 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -830,6 +830,8 @@ static int usb_audio_probe(struct usb_interface *intf, snd_media_device_create(chip, intf); }
+ chip->quirk_type = quirk->type; + usb_chip[chip->index] = chip; chip->intf[chip->num_interfaces] = intf; chip->num_interfaces++; @@ -912,6 +914,9 @@ static void usb_audio_disconnect(struct usb_interface *intf) } else { mutex_unlock(®ister_mutex); } + + if (chip->quirk_type & QUIRK_SETUP_DISABLE_AUTOSUSPEND) + usb_enable_autosuspend(interface_to_usbdev(intf)); }
/* lock the shutdown (disconnect) task and autoresume */ diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 9ba4682ebc48..ef5ee899db26 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -547,7 +547,7 @@ static int setup_disable_autosuspend(struct snd_usb_audio *chip, struct usb_driver *driver, const struct snd_usb_audio_quirk *quirk) { - driver->supports_autosuspend = 0; + usb_disable_autosuspend(interface_to_usbdev(iface)); return 1; /* Continue with creating streams and mixer */ }
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 215c1771dd57..60b9dd7df6bb 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -27,6 +27,7 @@ struct snd_usb_audio { struct snd_card *card; struct usb_interface *intf[MAX_CARD_INTERFACES]; u32 usb_id; + uint16_t quirk_type; struct mutex mutex; unsigned int system_suspend; atomic_t active;
On Thu, 04 Mar 2021 05:34:16 +0100, Kai-Heng Feng wrote:
Rear audio on Lenovo ThinkStation P620 stops working after commit 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620"): [ 6.013526] usbcore: registered new interface driver snd-usb-audio [ 6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
I overlooked the issue because when I was working on the said commit, only the front audio is tested. Apology for that.
Changing supports_autosuspend in driver is too late for disabling autosuspend, because it was already used by USB probe routine, so it can break the balance on the following code that depends on supports_autosuspend.
Fix it by using usb_disable_autosuspend() helper, and balance the suspend count in disconnect callback.
Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620") Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com
Thanks, applied.
Takashi
On Thu, 2021-03-04 at 12:34 +0800, Kai-Heng Feng wrote:
Rear audio on Lenovo ThinkStation P620 stops working after commit 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620"): [ 6.013526] usbcore: registered new interface driver snd-usb-audio [ 6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
I overlooked the issue because when I was working on the said commit, only the front audio is tested. Apology for that.
Changing supports_autosuspend in driver is too late for disabling autosuspend, because it was already used by USB probe routine, so it can break the balance on the following code that depends on supports_autosuspend.
Fix it by using usb_disable_autosuspend() helper, and balance the suspend count in disconnect callback.
Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620") Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com
I got an report from a co-worker who has no USB sound from a Lenovo ThinkPad in a Ultra Dock. USB HS is connected to Dock USB jack. Could this be the same problem?
Jocke
Hi Joakim,
On Thu, Mar 4, 2021 at 5:50 PM Joakim Tjernlund Joakim.Tjernlund@infinera.com wrote:
On Thu, 2021-03-04 at 12:34 +0800, Kai-Heng Feng wrote:
Rear audio on Lenovo ThinkStation P620 stops working after commit 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620"): [ 6.013526] usbcore: registered new interface driver snd-usb-audio [ 6.023064] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023083] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023090] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023098] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.023103] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.023110] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045846] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045866] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045877] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045886] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4 [ 6.045894] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x0, type = 1 [ 6.045908] usb 3-6: cannot get ctl value: req = 0x81, wValue = 0x202, wIndex = 0x0, type = 4
I overlooked the issue because when I was working on the said commit, only the front audio is tested. Apology for that.
Changing supports_autosuspend in driver is too late for disabling autosuspend, because it was already used by USB probe routine, so it can break the balance on the following code that depends on supports_autosuspend.
Fix it by using usb_disable_autosuspend() helper, and balance the suspend count in disconnect callback.
Fixes: 1965c4364bdd ("ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620") Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com
I got an report from a co-worker who has no USB sound from a Lenovo ThinkPad in a Ultra Dock. USB HS is connected to Dock USB jack. Could this be the same problem?
It's a different issue. Please file a separate bug report.
Kai-Heng
Jocke
participants (3)
-
Joakim Tjernlund
-
Kai-Heng Feng
-
Takashi Iwai