[alsa-devel] [PATCH v2] ASoC: rt5677: Add the chip type to distinguish the setting of the clock source
There is only one clock source in the rt5676, so the chip type is added to distinguish the setting of the clock source in the VAD function.
Signed-off-by: Oder Chiou oder_chiou@realtek.com --- sound/soc/codecs/rt5677.c | 28 ++++++++++++++++++++++------ sound/soc/codecs/rt5677.h | 6 ++++++ 2 files changed, 28 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index 5d0bb87..ab62777 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -718,11 +718,24 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on) RT5677_LDO1_SEL_MASK, 0x0); regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG2, RT5677_PWR_LDO1, RT5677_PWR_LDO1); - regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK1, - RT5677_MCLK_SRC_MASK, RT5677_MCLK2_SRC); - regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK2, - RT5677_PLL2_PR_SRC_MASK | RT5677_DSP_CLK_SRC_MASK, - RT5677_PLL2_PR_SRC_MCLK2 | RT5677_DSP_CLK_SRC_BYPASS); + switch (rt5677->type) { + case RT5677: + regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK1, + RT5677_MCLK_SRC_MASK, RT5677_MCLK2_SRC); + regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK2, + RT5677_PLL2_PR_SRC_MASK | + RT5677_DSP_CLK_SRC_MASK, + RT5677_PLL2_PR_SRC_MCLK2 | + RT5677_DSP_CLK_SRC_BYPASS); + break; + case RT5676: + regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK2, + RT5677_DSP_CLK_SRC_MASK, + RT5677_DSP_CLK_SRC_BYPASS); + break; + default: + break; + } regmap_write(rt5677->regmap, RT5677_PWR_DSP2, 0x07ff); regmap_write(rt5677->regmap, RT5677_PWR_DSP1, 0x07fd); rt5677_set_dsp_mode(codec, true); @@ -4733,7 +4746,8 @@ static const struct regmap_config rt5677_regmap = { };
static const struct i2c_device_id rt5677_i2c_id[] = { - { "rt5677", 0 }, + { "rt5677", RT5677 }, + { "rt5676", RT5676 }, { } }; MODULE_DEVICE_TABLE(i2c, rt5677_i2c_id); @@ -4850,6 +4864,8 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, rt5677);
+ rt5677->type = id->driver_data; + if (pdata) rt5677->pdata = *pdata;
diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h index c0a625f..07df96b 100644 --- a/sound/soc/codecs/rt5677.h +++ b/sound/soc/codecs/rt5677.h @@ -1665,6 +1665,11 @@ enum { RT5677_IRQ_JD3, };
+enum rt5677_type { + RT5677, + RT5676, +}; + struct rt5677_priv { struct snd_soc_codec *codec; struct rt5677_platform_data pdata; @@ -1681,6 +1686,7 @@ struct rt5677_priv { int pll_in; int pll_out; int pow_ldo2; /* POW_LDO2 pin */ + enum rt5677_type type; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio_chip; #endif
On Wed, Feb 11, 2015 at 07:18:51PM +0800, Oder Chiou wrote:
There is only one clock source in the rt5676, so the chip type is added to distinguish the setting of the clock source in the VAD function.
Applied, thanks.
participants (2)
-
Mark Brown
-
Oder Chiou