[alsa-devel] [PATCH 1/2] conf/ucm: Add UCM profile for cht-bsw-rt5672 boards
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/rt5672 dir with codec specific enable / disable sequences for the various inputs and outputs.
This is partly based on earlier work done here: https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Signed-off-by: Hans de Goede hdegoede@redhat.com --- configure.ac | 2 + src/conf/ucm/Makefile.am | 1 + src/conf/ucm/cht-bsw-rt5672/HiFi.conf | 27 +++++++++++ src/conf/ucm/cht-bsw-rt5672/Makefile.am | 4 ++ .../ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf | 6 +++ src/conf/ucm/codecs/Makefile.am | 1 + src/conf/ucm/codecs/rt5672/DMIC1.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/DMIC2.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/EnableSeq.conf | 48 +++++++++++++++++++ src/conf/ucm/codecs/rt5672/HeadPhones.conf | 23 +++++++++ src/conf/ucm/codecs/rt5672/HeadsetMic.conf | 38 +++++++++++++++ src/conf/ucm/codecs/rt5672/Makefile.am | 5 ++ src/conf/ucm/codecs/rt5672/MonoSpeaker.conf | 26 ++++++++++ src/conf/ucm/codecs/rt5672/Speaker.conf | 22 +++++++++ 14 files changed, 259 insertions(+) create mode 100644 src/conf/ucm/cht-bsw-rt5672/HiFi.conf create mode 100644 src/conf/ucm/cht-bsw-rt5672/Makefile.am create mode 100644 src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC1.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC2.conf create mode 100644 src/conf/ucm/codecs/rt5672/EnableSeq.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadPhones.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadsetMic.conf create mode 100644 src/conf/ucm/codecs/rt5672/Makefile.am create mode 100644 src/conf/ucm/codecs/rt5672/MonoSpeaker.conf create mode 100644 src/conf/ucm/codecs/rt5672/Speaker.conf
diff --git a/configure.ac b/configure.ac index 2e955760..9ccca7aa 100644 --- a/configure.ac +++ b/configure.ac @@ -741,6 +741,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/bytcr-rt5651-stereo-spk-in1-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in2-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in12-mic/Makefile \ + src/conf/ucm/cht-bsw-rt5672/Makefile \ src/conf/ucm/chtnau8824/Makefile \ src/conf/ucm/chtrt5645/Makefile \ src/conf/ucm/chtrt5645-mono-speaker-analog-mic/Makefile \ @@ -772,6 +773,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/codecs/rt5640/Makefile \ src/conf/ucm/codecs/rt5645/Makefile \ src/conf/ucm/codecs/rt5651/Makefile \ + src/conf/ucm/codecs/rt5672/Makefile \ src/conf/ucm/platforms/Makefile \ src/conf/ucm/platforms/bytcr/Makefile \ src/conf/topology/Makefile \ diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index 02257048..2ed4e1a3 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -25,6 +25,7 @@ bytcr-rt5651-stereo-spk-dmic-mic \ bytcr-rt5651-stereo-spk-in1-mic \ bytcr-rt5651-stereo-spk-in2-mic \ bytcr-rt5651-stereo-spk-in12-mic \ +cht-bsw-rt5672 \ chtnau8824 \ chtrt5645 \ chtrt5645-mono-speaker-analog-mic \ diff --git a/src/conf/ucm/cht-bsw-rt5672/HiFi.conf b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf new file mode 100644 index 00000000..b83099d8 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf @@ -0,0 +1,27 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672 + +SectionVerb { + EnableSequence [ + cdev "hw:chtbswrt5672" + <platforms/bytcr/PlatformEnableSeq.conf> + <codecs/rt5672/EnableSeq.conf> + ] + + DisableSequence [ + cdev "hw:chtbswrt5672" + <platforms/bytcr/PlatformDisableSeq.conf> + ] + + Value { + PlaybackPCM "hw:chtbswrt5672" + CapturePCM "hw:chtbswrt5672" + } +} + +<codecs/rt5672/Speaker.conf> +<codecs/rt5672/MonoSpeaker.conf> +<codecs/rt5672/HeadPhones.conf> + +<codecs/rt5672/DMIC1.conf> +<codecs/rt5672/DMIC2.conf> +<codecs/rt5672/HeadsetMic.conf> diff --git a/src/conf/ucm/cht-bsw-rt5672/Makefile.am b/src/conf/ucm/cht-bsw-rt5672/Makefile.am new file mode 100644 index 00000000..c3d557fa --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/cht-bsw-rt5672 +ucm_DATA = cht-bsw-rt5672.conf HiFi.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf new file mode 100644 index 00000000..c79024d9 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf @@ -0,0 +1,6 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672 + +SectionUseCase."HiFi" { + File "HiFi.conf" + Comment "Play HiFi quality Music" +} diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am index 5987b9cf..17c4ebf9 100644 --- a/src/conf/ucm/codecs/Makefile.am +++ b/src/conf/ucm/codecs/Makefile.am @@ -4,4 +4,5 @@ es8316 \ rt5640 \ rt5645 \ rt5651 \ +rt5672 \ nau8824 diff --git a/src/conf/ucm/codecs/rt5672/DMIC1.conf b/src/conf/ucm/codecs/rt5672/DMIC1.conf new file mode 100644 index 00000000..9a8db1a5 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC1.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC1" { + Comment "Internal Digital Microphone on DMIC1" + + ConflictingDevice [ + "DigitalMic-DMIC2" + "HeadsetMic" + ] + + EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Int Mic Switch' on" + cset "name='Stereo1 DMIC Mux' DMIC1" + cset "name='Stereo1 ADC 2 Mux' DMIC" + cset "name='Sto1 ADC MIXL ADC2 Switch' on" + cset "name='Sto1 ADC MIXR ADC2 Switch' on" + ] + + DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Int Mic Switch' off" + cset "name='Sto1 ADC MIXL ADC2 Switch' off" + cset "name='Sto1 ADC MIXR ADC2 Switch' off" + ] + + Value { + CaptureChannels 2 + } +} diff --git a/src/conf/ucm/codecs/rt5672/DMIC2.conf b/src/conf/ucm/codecs/rt5672/DMIC2.conf new file mode 100644 index 00000000..b960436e --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC2.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC2" { + Comment "Internal Digital Microphone on DMIC2" + + ConflictingDevice [ + "DigitalMic-DMIC1" + "HeadsetMic" + ] + + EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Int Mic Switch' on" + cset "name='Stereo1 DMIC Mux' DMIC2" + cset "name='Stereo1 ADC 2 Mux' DMIC" + cset "name='Sto1 ADC MIXL ADC2 Switch' on" + cset "name='Sto1 ADC MIXR ADC2 Switch' on" + ] + + DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Int Mic Switch' off" + cset "name='Sto1 ADC MIXL ADC2 Switch' off" + cset "name='Sto1 ADC MIXR ADC2 Switch' off" + ] + + Value { + CaptureChannels 2 + } +} diff --git a/src/conf/ucm/codecs/rt5672/EnableSeq.conf b/src/conf/ucm/codecs/rt5672/EnableSeq.conf new file mode 100644 index 00000000..bd4f357c --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/EnableSeq.conf @@ -0,0 +1,48 @@ +# Playback (I2S1) + +# common +cset "name='DAC1 L Mux' IF1 DAC" +cset "name='DAC1 R Mux' IF1 DAC" +cset "name='DAC1 MIXL DAC1 Switch' on" +cset "name='DAC1 MIXR DAC1 Switch' on" +cset "name='Stereo DAC MIXL DAC L1 Switch' on" +cset "name='Stereo DAC MIXL DAC R1 Switch' off" +cset "name='Stereo DAC MIXR DAC R1 Switch' on" +cset "name='Stereo DAC MIXR DAC L1 Switch' off" + +# speaker +cset "name='PDM1 L Mux' Stereo DAC" +cset "name='PDM1 R Mux' Stereo DAC" + +# headphone +cset "name='HPOVOL MIXL DAC1 Switch' on" +cset "name='HPOVOL MIXR DAC1 Switch' on" +cset "name='HPO MIX HPVOL Switch' on" + +# line out +# cset "name='OUT MIXL DAC L1 Switch' on" +# cset "name='OUT MIXR DAC R1 Switch' on" +# cset "name='LOUT MIX OUTMIX L Switch' on" +# cset "name='LOUT MIX OUTMIX R Switch' on" + +# 47=0dB, 0.375 dB/step +cset "name='ADC Capture Volume' 47" +cset "name='ADC Capture Switch' on" + +# Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first +# available boost step +cset "name='IN1 Boost Volume' 1" + +# Start with all outputs / inputs disabled +cset "name='Ext Spk Switch' off" +cset "name='Headphone Switch' off" +cset "name='Int Mic Switch' off" +cset "name='Headset Mic Switch' off" +cset "name='Sto1 ADC MIXL ADC1 Switch' off" +cset "name='Sto1 ADC MIXR ADC1 Switch' off" +cset "name='Sto1 ADC MIXL ADC2 Switch' off" +cset "name='Sto1 ADC MIXR ADC2 Switch' off" +cset "name='RECMIXL BST1 Switch' off" +cset "name='RECMIXR BST1 Switch' off" +cset "name='RECMIXL BST2 Switch' off" +cset "name='RECMIXR BST2 Switch' off" diff --git a/src/conf/ucm/codecs/rt5672/HeadPhones.conf b/src/conf/ucm/codecs/rt5672/HeadPhones.conf new file mode 100644 index 00000000..cb8aad2d --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadPhones.conf @@ -0,0 +1,23 @@ +SectionDevice."Headphones" { + Comment "Headphones" + + ConflictingDevice [ + "Speaker" + "MonoSpeaker" + ] + + EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Headphone Switch' on" + ] + + DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Headphone Switch' off" + ] + + Value { + PlaybackChannels "2" + JackControl "Headphone Jack" + } +} diff --git a/src/conf/ucm/codecs/rt5672/HeadsetMic.conf b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf new file mode 100644 index 00000000..cc6d8d56 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf @@ -0,0 +1,38 @@ +SectionDevice."HeadsetMic" { + Comment "Headset Microphone" + + ConflictingDevice [ + "DigitalMic-DMIC1" + "DigitalMic-DMIC2" + ] + + EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Headset Mic Switch' on" + cset "name='RECMIXL BST1 Switch' on" + cset "name='RECMIXR BST1 Switch' on" + cset "name='Sto1 ADC MIXL ADC1 Switch' on" + cset "name='Sto1 ADC MIXR ADC1 Switch' on" + # For unknown reasons the headset mic sound is only recorded + # on the left channel, we tweak the data-stream reception to + # use the left samples for both slots, so that we get a stereo + # stream with the mic sound on both channels + cset "name='codec_in rx deinterleaver codec_in0_1' 1" + ] + + DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Headset Mic Switch' off" + cset "name='RECMIXL BST1 Switch' off" + cset "name='RECMIXR BST1 Switch' off" + cset "name='Sto1 ADC MIXL ADC1 Switch' off" + cset "name='Sto1 ADC MIXR ADC1 Switch' off" + # Undo data-stream reception mono-mix workaround + cset "name='codec_in rx deinterleaver codec_in0_1' 2" + ] + + Value { + CaptureChannels "2" + JackControl "Headset Mic Jack" + } +} diff --git a/src/conf/ucm/codecs/rt5672/Makefile.am b/src/conf/ucm/codecs/rt5672/Makefile.am new file mode 100644 index 00000000..feba0b76 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Makefile.am @@ -0,0 +1,5 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/codecs/rt5672 +ucm_DATA = DMIC1.conf DMIC2.conf EnableSeq.conf HeadPhones.conf \ + HeadsetMic.conf MonoSpeaker.conf Speaker.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf new file mode 100644 index 00000000..828a1154 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf @@ -0,0 +1,26 @@ +SectionDevice."MonoSpeaker" { + Comment "Mono Speaker" + + ConflictingDevice [ + "Speaker" + "Headphones" + ] + + EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Stereo DAC MIXR DAC R1 Switch' off" + cset "name='Stereo DAC MIXL DAC R1 Switch' on" + cset "name='Ext Spk Switch' on" + ] + + DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Ext Spk Switch' off" + cset "name='Stereo DAC MIXL DAC R1 Switch' off" + cset "name='Stereo DAC MIXR DAC R1 Switch' on" + ] + + Value { + PlaybackChannels "2" + } +} diff --git a/src/conf/ucm/codecs/rt5672/Speaker.conf b/src/conf/ucm/codecs/rt5672/Speaker.conf new file mode 100644 index 00000000..f9291e53 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Speaker.conf @@ -0,0 +1,22 @@ +SectionDevice."Speaker" { + Comment "Speakers" + + ConflictingDevice [ + "MonoSpeaker" + "Headphones" + ] + + EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Ext Spk Switch' on" + ] + + DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Ext Spk Switch' off" + ] + + Value { + PlaybackChannels "2" + } +}
The Lenovo Thinkpad 8 tablet has stereo speakers and its internal DMIC on DMIC1, at a device specific profile for this.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- configure.ac | 1 + .../HiFi.conf | 23 +++++++++++++++++++ ...ENOVO-20BN002QGE-ThinkPad8-20BN002QGE.conf | 4 ++++ .../Makefile.am | 4 ++++ src/conf/ucm/Makefile.am | 1 + 5 files changed, 33 insertions(+) create mode 100644 src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/HiFi.conf create mode 100644 src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE.conf create mode 100644 src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/Makefile.am
diff --git a/configure.ac b/configure.ac index 9ccca7aa..778bc64e 100644 --- a/configure.ac +++ b/configure.ac @@ -756,6 +756,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/Makefile \ src/conf/ucm/HDAudio-Lenovo-DualCodecs/Makefile \ src/conf/ucm/kblrt5660/Makefile \ + src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/Makefile \ src/conf/ucm/LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216/Makefile \ src/conf/ucm/PandaBoard/Makefile \ src/conf/ucm/PandaBoardES/Makefile \ diff --git a/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/HiFi.conf b/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/HiFi.conf new file mode 100644 index 00000000..43c3c0dd --- /dev/null +++ b/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/HiFi.conf @@ -0,0 +1,23 @@ +SectionVerb { + EnableSequence [ + cdev "hw:chtbswrt5672" + <platforms/bytcr/PlatformEnableSeq.conf> + <codecs/rt5672/EnableSeq.conf> + ] + + DisableSequence [ + cdev "hw:chtbswrt5672" + <platforms/bytcr/PlatformDisableSeq.conf> + ] + + Value { + PlaybackPCM "hw:chtbswrt5672" + CapturePCM "hw:chtbswrt5672" + } +} + +<codecs/rt5672/Speaker.conf> +<codecs/rt5672/HeadPhones.conf> + +<codecs/rt5672/DMIC2.conf> +<codecs/rt5672/HeadsetMic.conf> diff --git a/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE.conf b/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE.conf new file mode 100644 index 00000000..1c3a766b --- /dev/null +++ b/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE.conf @@ -0,0 +1,4 @@ +SectionUseCase."HiFi" { + File "../LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/HiFi.conf" + Comment "Play HiFi quality Music" +} diff --git a/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/Makefile.am b/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/Makefile.am new file mode 100644 index 00000000..842409e8 --- /dev/null +++ b/src/conf/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/LENOVO-20BN002QGE-ThinkPad8-20BN002QGE +ucm_DATA = LENOVO-20BN002QGE-ThinkPad8-20BN002QGE.conf HiFi.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index 2ed4e1a3..7bb8eb1d 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -40,6 +40,7 @@ gpd-win-pocket-rt5645 \ HDAudio-Gigabyte-ALC1220DualCodecs \ HDAudio-Lenovo-DualCodecs \ kblrt5660 \ +LENOVO-20BN002QGE-ThinkPad8-20BN002QGE \ LENOVO-80XF-LenovoMIIX320_10ICR-LNVNB161216 \ PandaBoard \ PandaBoardES \
On Sat, 31 Aug 2019 16:58:41 +0200, Hans de Goede wrote:
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/rt5672 dir with codec specific enable / disable sequences for the various inputs and outputs.
This is partly based on earlier work done here: https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Signed-off-by: Hans de Goede hdegoede@redhat.com
We've recently set up a new alsa-ucm-conf repo for keeping UCM profiles outside alsa-lib repo. The new repo has a different license (BSD3-Clause) for easily adapting to OSes with license restriction.
I guess we should put the stuff there from now on, as much as possible? The handling of UCM profile is currently pending, and we need to decide the general policy, as well as how to transfer the existing profiles to the new repo...
thanks,
Takashi
configure.ac | 2 + src/conf/ucm/Makefile.am | 1 + src/conf/ucm/cht-bsw-rt5672/HiFi.conf | 27 +++++++++++ src/conf/ucm/cht-bsw-rt5672/Makefile.am | 4 ++ .../ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf | 6 +++ src/conf/ucm/codecs/Makefile.am | 1 + src/conf/ucm/codecs/rt5672/DMIC1.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/DMIC2.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/EnableSeq.conf | 48 +++++++++++++++++++ src/conf/ucm/codecs/rt5672/HeadPhones.conf | 23 +++++++++ src/conf/ucm/codecs/rt5672/HeadsetMic.conf | 38 +++++++++++++++ src/conf/ucm/codecs/rt5672/Makefile.am | 5 ++ src/conf/ucm/codecs/rt5672/MonoSpeaker.conf | 26 ++++++++++ src/conf/ucm/codecs/rt5672/Speaker.conf | 22 +++++++++ 14 files changed, 259 insertions(+) create mode 100644 src/conf/ucm/cht-bsw-rt5672/HiFi.conf create mode 100644 src/conf/ucm/cht-bsw-rt5672/Makefile.am create mode 100644 src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC1.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC2.conf create mode 100644 src/conf/ucm/codecs/rt5672/EnableSeq.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadPhones.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadsetMic.conf create mode 100644 src/conf/ucm/codecs/rt5672/Makefile.am create mode 100644 src/conf/ucm/codecs/rt5672/MonoSpeaker.conf create mode 100644 src/conf/ucm/codecs/rt5672/Speaker.conf
diff --git a/configure.ac b/configure.ac index 2e955760..9ccca7aa 100644 --- a/configure.ac +++ b/configure.ac @@ -741,6 +741,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/bytcr-rt5651-stereo-spk-in1-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in2-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in12-mic/Makefile \
src/conf/ucm/cht-bsw-rt5672/Makefile \@@ -772,6 +773,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/codecs/rt5640/Makefile \ src/conf/ucm/codecs/rt5645/Makefile \ src/conf/ucm/codecs/rt5651/Makefile \
src/conf/ucm/codecs/rt5672/Makefile \diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index 02257048..2ed4e1a3 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -25,6 +25,7 @@ bytcr-rt5651-stereo-spk-dmic-mic \ bytcr-rt5651-stereo-spk-in1-mic \ bytcr-rt5651-stereo-spk-in2-mic \ bytcr-rt5651-stereo-spk-in12-mic \ +cht-bsw-rt5672 \ chtnau8824 \ chtrt5645 \ chtrt5645-mono-speaker-analog-mic \ diff --git a/src/conf/ucm/cht-bsw-rt5672/HiFi.conf b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf new file mode 100644 index 00000000..b83099d8 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf @@ -0,0 +1,27 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionVerb {
- EnableSequence [
cdev "hw:chtbswrt5672"<platforms/bytcr/PlatformEnableSeq.conf><codecs/rt5672/EnableSeq.conf>- ]
- DisableSequence [
cdev "hw:chtbswrt5672"<platforms/bytcr/PlatformDisableSeq.conf>- ]
- Value {
PlaybackPCM "hw:chtbswrt5672"CapturePCM "hw:chtbswrt5672"- }
+}
+<codecs/rt5672/Speaker.conf> +<codecs/rt5672/MonoSpeaker.conf> +<codecs/rt5672/HeadPhones.conf>
+<codecs/rt5672/DMIC1.conf> +<codecs/rt5672/DMIC2.conf> +<codecs/rt5672/HeadsetMic.conf> diff --git a/src/conf/ucm/cht-bsw-rt5672/Makefile.am b/src/conf/ucm/cht-bsw-rt5672/Makefile.am new file mode 100644 index 00000000..c3d557fa --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/cht-bsw-rt5672 +ucm_DATA = cht-bsw-rt5672.conf HiFi.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf new file mode 100644 index 00000000..c79024d9 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf @@ -0,0 +1,6 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionUseCase."HiFi" {
- File "HiFi.conf"
- Comment "Play HiFi quality Music"
+} diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am index 5987b9cf..17c4ebf9 100644 --- a/src/conf/ucm/codecs/Makefile.am +++ b/src/conf/ucm/codecs/Makefile.am @@ -4,4 +4,5 @@ es8316 \ rt5640 \ rt5645 \ rt5651 \ +rt5672 \ nau8824 diff --git a/src/conf/ucm/codecs/rt5672/DMIC1.conf b/src/conf/ucm/codecs/rt5672/DMIC1.conf new file mode 100644 index 00000000..9a8db1a5 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC1.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC1" {
- Comment "Internal Digital Microphone on DMIC1"
- ConflictingDevice [
"DigitalMic-DMIC2""HeadsetMic"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' on"cset "name='Stereo1 DMIC Mux' DMIC1"cset "name='Stereo1 ADC 2 Mux' DMIC"cset "name='Sto1 ADC MIXL ADC2 Switch' on"cset "name='Sto1 ADC MIXR ADC2 Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' off"cset "name='Sto1 ADC MIXL ADC2 Switch' off"cset "name='Sto1 ADC MIXR ADC2 Switch' off"- ]
- Value {
CaptureChannels 2- }
+} diff --git a/src/conf/ucm/codecs/rt5672/DMIC2.conf b/src/conf/ucm/codecs/rt5672/DMIC2.conf new file mode 100644 index 00000000..b960436e --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC2.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC2" {
- Comment "Internal Digital Microphone on DMIC2"
- ConflictingDevice [
"DigitalMic-DMIC1""HeadsetMic"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' on"cset "name='Stereo1 DMIC Mux' DMIC2"cset "name='Stereo1 ADC 2 Mux' DMIC"cset "name='Sto1 ADC MIXL ADC2 Switch' on"cset "name='Sto1 ADC MIXR ADC2 Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' off"cset "name='Sto1 ADC MIXL ADC2 Switch' off"cset "name='Sto1 ADC MIXR ADC2 Switch' off"- ]
- Value {
CaptureChannels 2- }
+} diff --git a/src/conf/ucm/codecs/rt5672/EnableSeq.conf b/src/conf/ucm/codecs/rt5672/EnableSeq.conf new file mode 100644 index 00000000..bd4f357c --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/EnableSeq.conf @@ -0,0 +1,48 @@ +# Playback (I2S1)
+# common +cset "name='DAC1 L Mux' IF1 DAC" +cset "name='DAC1 R Mux' IF1 DAC" +cset "name='DAC1 MIXL DAC1 Switch' on" +cset "name='DAC1 MIXR DAC1 Switch' on" +cset "name='Stereo DAC MIXL DAC L1 Switch' on" +cset "name='Stereo DAC MIXL DAC R1 Switch' off" +cset "name='Stereo DAC MIXR DAC R1 Switch' on" +cset "name='Stereo DAC MIXR DAC L1 Switch' off"
+# speaker +cset "name='PDM1 L Mux' Stereo DAC" +cset "name='PDM1 R Mux' Stereo DAC"
+# headphone +cset "name='HPOVOL MIXL DAC1 Switch' on" +cset "name='HPOVOL MIXR DAC1 Switch' on" +cset "name='HPO MIX HPVOL Switch' on"
+# line out +# cset "name='OUT MIXL DAC L1 Switch' on" +# cset "name='OUT MIXR DAC R1 Switch' on" +# cset "name='LOUT MIX OUTMIX L Switch' on" +# cset "name='LOUT MIX OUTMIX R Switch' on"
+# 47=0dB, 0.375 dB/step +cset "name='ADC Capture Volume' 47" +cset "name='ADC Capture Switch' on"
+# Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first +# available boost step +cset "name='IN1 Boost Volume' 1"
+# Start with all outputs / inputs disabled +cset "name='Ext Spk Switch' off" +cset "name='Headphone Switch' off" +cset "name='Int Mic Switch' off" +cset "name='Headset Mic Switch' off" +cset "name='Sto1 ADC MIXL ADC1 Switch' off" +cset "name='Sto1 ADC MIXR ADC1 Switch' off" +cset "name='Sto1 ADC MIXL ADC2 Switch' off" +cset "name='Sto1 ADC MIXR ADC2 Switch' off" +cset "name='RECMIXL BST1 Switch' off" +cset "name='RECMIXR BST1 Switch' off" +cset "name='RECMIXL BST2 Switch' off" +cset "name='RECMIXR BST2 Switch' off" diff --git a/src/conf/ucm/codecs/rt5672/HeadPhones.conf b/src/conf/ucm/codecs/rt5672/HeadPhones.conf new file mode 100644 index 00000000..cb8aad2d --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadPhones.conf @@ -0,0 +1,23 @@ +SectionDevice."Headphones" {
- Comment "Headphones"
- ConflictingDevice [
"Speaker""MonoSpeaker"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Headphone Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Headphone Switch' off"- ]
- Value {
PlaybackChannels "2"JackControl "Headphone Jack"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/HeadsetMic.conf b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf new file mode 100644 index 00000000..cc6d8d56 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf @@ -0,0 +1,38 @@ +SectionDevice."HeadsetMic" {
- Comment "Headset Microphone"
- ConflictingDevice [
"DigitalMic-DMIC1""DigitalMic-DMIC2"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Headset Mic Switch' on"cset "name='RECMIXL BST1 Switch' on"cset "name='RECMIXR BST1 Switch' on"cset "name='Sto1 ADC MIXL ADC1 Switch' on"cset "name='Sto1 ADC MIXR ADC1 Switch' on"# For unknown reasons the headset mic sound is only recorded# on the left channel, we tweak the data-stream reception to# use the left samples for both slots, so that we get a stereo# stream with the mic sound on both channelscset "name='codec_in rx deinterleaver codec_in0_1' 1"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Headset Mic Switch' off"cset "name='RECMIXL BST1 Switch' off"cset "name='RECMIXR BST1 Switch' off"cset "name='Sto1 ADC MIXL ADC1 Switch' off"cset "name='Sto1 ADC MIXR ADC1 Switch' off"# Undo data-stream reception mono-mix workaroundcset "name='codec_in rx deinterleaver codec_in0_1' 2"- ]
- Value {
CaptureChannels "2"JackControl "Headset Mic Jack"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/Makefile.am b/src/conf/ucm/codecs/rt5672/Makefile.am new file mode 100644 index 00000000..feba0b76 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Makefile.am @@ -0,0 +1,5 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/codecs/rt5672 +ucm_DATA = DMIC1.conf DMIC2.conf EnableSeq.conf HeadPhones.conf \
HeadsetMic.conf MonoSpeaker.conf Speaker.conf+EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf new file mode 100644 index 00000000..828a1154 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf @@ -0,0 +1,26 @@ +SectionDevice."MonoSpeaker" {
- Comment "Mono Speaker"
- ConflictingDevice [
"Speaker""Headphones"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Stereo DAC MIXR DAC R1 Switch' off"cset "name='Stereo DAC MIXL DAC R1 Switch' on"cset "name='Ext Spk Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' off"cset "name='Stereo DAC MIXL DAC R1 Switch' off"cset "name='Stereo DAC MIXR DAC R1 Switch' on"- ]
- Value {
PlaybackChannels "2"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/Speaker.conf b/src/conf/ucm/codecs/rt5672/Speaker.conf new file mode 100644 index 00000000..f9291e53 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Speaker.conf @@ -0,0 +1,22 @@ +SectionDevice."Speaker" {
- Comment "Speakers"
- ConflictingDevice [
"MonoSpeaker""Headphones"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' off"- ]
- Value {
PlaybackChannels "2"- }
+}
2.23.0
Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi Takashi,
On 02-09-19 09:07, Takashi Iwai wrote:
On Sat, 31 Aug 2019 16:58:41 +0200, Hans de Goede wrote:
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/rt5672 dir with codec specific enable / disable sequences for the various inputs and outputs.
This is partly based on earlier work done here: https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Signed-off-by: Hans de Goede hdegoede@redhat.com
We've recently set up a new alsa-ucm-conf repo for keeping UCM profiles outside alsa-lib repo. The new repo has a different license (BSD3-Clause) for easily adapting to OSes with license restriction.
I guess we should put the stuff there from now on, as much as possible? The handling of UCM profile is currently pending, and we need to decide the general policy, as well as how to transfer the existing profiles to the new repo...
I think it is good that we now have a separate repo and I'm fine with re-licensing all my UCM profile work under a BSD3-Clause license.
But I believe that until we have actually figured out how this is all going to work and we are actually doing releases from the new alsa-ucm-conf repo, we should keep adding new profiles to alsa-lib for now, because these profiles are necessary for things to work OOTB for our end users.
Regards,
Hans
configure.ac | 2 + src/conf/ucm/Makefile.am | 1 + src/conf/ucm/cht-bsw-rt5672/HiFi.conf | 27 +++++++++++ src/conf/ucm/cht-bsw-rt5672/Makefile.am | 4 ++ .../ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf | 6 +++ src/conf/ucm/codecs/Makefile.am | 1 + src/conf/ucm/codecs/rt5672/DMIC1.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/DMIC2.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/EnableSeq.conf | 48 +++++++++++++++++++ src/conf/ucm/codecs/rt5672/HeadPhones.conf | 23 +++++++++ src/conf/ucm/codecs/rt5672/HeadsetMic.conf | 38 +++++++++++++++ src/conf/ucm/codecs/rt5672/Makefile.am | 5 ++ src/conf/ucm/codecs/rt5672/MonoSpeaker.conf | 26 ++++++++++ src/conf/ucm/codecs/rt5672/Speaker.conf | 22 +++++++++ 14 files changed, 259 insertions(+) create mode 100644 src/conf/ucm/cht-bsw-rt5672/HiFi.conf create mode 100644 src/conf/ucm/cht-bsw-rt5672/Makefile.am create mode 100644 src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC1.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC2.conf create mode 100644 src/conf/ucm/codecs/rt5672/EnableSeq.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadPhones.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadsetMic.conf create mode 100644 src/conf/ucm/codecs/rt5672/Makefile.am create mode 100644 src/conf/ucm/codecs/rt5672/MonoSpeaker.conf create mode 100644 src/conf/ucm/codecs/rt5672/Speaker.conf
diff --git a/configure.ac b/configure.ac index 2e955760..9ccca7aa 100644 --- a/configure.ac +++ b/configure.ac @@ -741,6 +741,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/bytcr-rt5651-stereo-spk-in1-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in2-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in12-mic/Makefile \
src/conf/ucm/cht-bsw-rt5672/Makefile \@@ -772,6 +773,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/codecs/rt5640/Makefile \ src/conf/ucm/codecs/rt5645/Makefile \ src/conf/ucm/codecs/rt5651/Makefile \
src/conf/ucm/codecs/rt5672/Makefile \diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index 02257048..2ed4e1a3 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -25,6 +25,7 @@ bytcr-rt5651-stereo-spk-dmic-mic \ bytcr-rt5651-stereo-spk-in1-mic \ bytcr-rt5651-stereo-spk-in2-mic \ bytcr-rt5651-stereo-spk-in12-mic \ +cht-bsw-rt5672 \ chtnau8824 \ chtrt5645 \ chtrt5645-mono-speaker-analog-mic \ diff --git a/src/conf/ucm/cht-bsw-rt5672/HiFi.conf b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf new file mode 100644 index 00000000..b83099d8 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf @@ -0,0 +1,27 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionVerb {
- EnableSequence [
cdev "hw:chtbswrt5672"<platforms/bytcr/PlatformEnableSeq.conf><codecs/rt5672/EnableSeq.conf>- ]
- DisableSequence [
cdev "hw:chtbswrt5672"<platforms/bytcr/PlatformDisableSeq.conf>- ]
- Value {
PlaybackPCM "hw:chtbswrt5672"CapturePCM "hw:chtbswrt5672"- }
+}
+<codecs/rt5672/Speaker.conf> +<codecs/rt5672/MonoSpeaker.conf> +<codecs/rt5672/HeadPhones.conf>
+<codecs/rt5672/DMIC1.conf> +<codecs/rt5672/DMIC2.conf> +<codecs/rt5672/HeadsetMic.conf> diff --git a/src/conf/ucm/cht-bsw-rt5672/Makefile.am b/src/conf/ucm/cht-bsw-rt5672/Makefile.am new file mode 100644 index 00000000..c3d557fa --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/cht-bsw-rt5672 +ucm_DATA = cht-bsw-rt5672.conf HiFi.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf new file mode 100644 index 00000000..c79024d9 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf @@ -0,0 +1,6 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionUseCase."HiFi" {
- File "HiFi.conf"
- Comment "Play HiFi quality Music"
+} diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am index 5987b9cf..17c4ebf9 100644 --- a/src/conf/ucm/codecs/Makefile.am +++ b/src/conf/ucm/codecs/Makefile.am @@ -4,4 +4,5 @@ es8316 \ rt5640 \ rt5645 \ rt5651 \ +rt5672 \ nau8824 diff --git a/src/conf/ucm/codecs/rt5672/DMIC1.conf b/src/conf/ucm/codecs/rt5672/DMIC1.conf new file mode 100644 index 00000000..9a8db1a5 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC1.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC1" {
- Comment "Internal Digital Microphone on DMIC1"
- ConflictingDevice [
"DigitalMic-DMIC2""HeadsetMic"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' on"cset "name='Stereo1 DMIC Mux' DMIC1"cset "name='Stereo1 ADC 2 Mux' DMIC"cset "name='Sto1 ADC MIXL ADC2 Switch' on"cset "name='Sto1 ADC MIXR ADC2 Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' off"cset "name='Sto1 ADC MIXL ADC2 Switch' off"cset "name='Sto1 ADC MIXR ADC2 Switch' off"- ]
- Value {
CaptureChannels 2- }
+} diff --git a/src/conf/ucm/codecs/rt5672/DMIC2.conf b/src/conf/ucm/codecs/rt5672/DMIC2.conf new file mode 100644 index 00000000..b960436e --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC2.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC2" {
- Comment "Internal Digital Microphone on DMIC2"
- ConflictingDevice [
"DigitalMic-DMIC1""HeadsetMic"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' on"cset "name='Stereo1 DMIC Mux' DMIC2"cset "name='Stereo1 ADC 2 Mux' DMIC"cset "name='Sto1 ADC MIXL ADC2 Switch' on"cset "name='Sto1 ADC MIXR ADC2 Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' off"cset "name='Sto1 ADC MIXL ADC2 Switch' off"cset "name='Sto1 ADC MIXR ADC2 Switch' off"- ]
- Value {
CaptureChannels 2- }
+} diff --git a/src/conf/ucm/codecs/rt5672/EnableSeq.conf b/src/conf/ucm/codecs/rt5672/EnableSeq.conf new file mode 100644 index 00000000..bd4f357c --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/EnableSeq.conf @@ -0,0 +1,48 @@ +# Playback (I2S1)
+# common +cset "name='DAC1 L Mux' IF1 DAC" +cset "name='DAC1 R Mux' IF1 DAC" +cset "name='DAC1 MIXL DAC1 Switch' on" +cset "name='DAC1 MIXR DAC1 Switch' on" +cset "name='Stereo DAC MIXL DAC L1 Switch' on" +cset "name='Stereo DAC MIXL DAC R1 Switch' off" +cset "name='Stereo DAC MIXR DAC R1 Switch' on" +cset "name='Stereo DAC MIXR DAC L1 Switch' off"
+# speaker +cset "name='PDM1 L Mux' Stereo DAC" +cset "name='PDM1 R Mux' Stereo DAC"
+# headphone +cset "name='HPOVOL MIXL DAC1 Switch' on" +cset "name='HPOVOL MIXR DAC1 Switch' on" +cset "name='HPO MIX HPVOL Switch' on"
+# line out +# cset "name='OUT MIXL DAC L1 Switch' on" +# cset "name='OUT MIXR DAC R1 Switch' on" +# cset "name='LOUT MIX OUTMIX L Switch' on" +# cset "name='LOUT MIX OUTMIX R Switch' on"
+# 47=0dB, 0.375 dB/step +cset "name='ADC Capture Volume' 47" +cset "name='ADC Capture Switch' on"
+# Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first +# available boost step +cset "name='IN1 Boost Volume' 1"
+# Start with all outputs / inputs disabled +cset "name='Ext Spk Switch' off" +cset "name='Headphone Switch' off" +cset "name='Int Mic Switch' off" +cset "name='Headset Mic Switch' off" +cset "name='Sto1 ADC MIXL ADC1 Switch' off" +cset "name='Sto1 ADC MIXR ADC1 Switch' off" +cset "name='Sto1 ADC MIXL ADC2 Switch' off" +cset "name='Sto1 ADC MIXR ADC2 Switch' off" +cset "name='RECMIXL BST1 Switch' off" +cset "name='RECMIXR BST1 Switch' off" +cset "name='RECMIXL BST2 Switch' off" +cset "name='RECMIXR BST2 Switch' off" diff --git a/src/conf/ucm/codecs/rt5672/HeadPhones.conf b/src/conf/ucm/codecs/rt5672/HeadPhones.conf new file mode 100644 index 00000000..cb8aad2d --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadPhones.conf @@ -0,0 +1,23 @@ +SectionDevice."Headphones" {
- Comment "Headphones"
- ConflictingDevice [
"Speaker""MonoSpeaker"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Headphone Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Headphone Switch' off"- ]
- Value {
PlaybackChannels "2"JackControl "Headphone Jack"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/HeadsetMic.conf b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf new file mode 100644 index 00000000..cc6d8d56 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf @@ -0,0 +1,38 @@ +SectionDevice."HeadsetMic" {
- Comment "Headset Microphone"
- ConflictingDevice [
"DigitalMic-DMIC1""DigitalMic-DMIC2"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Headset Mic Switch' on"cset "name='RECMIXL BST1 Switch' on"cset "name='RECMIXR BST1 Switch' on"cset "name='Sto1 ADC MIXL ADC1 Switch' on"cset "name='Sto1 ADC MIXR ADC1 Switch' on"# For unknown reasons the headset mic sound is only recorded# on the left channel, we tweak the data-stream reception to# use the left samples for both slots, so that we get a stereo# stream with the mic sound on both channelscset "name='codec_in rx deinterleaver codec_in0_1' 1"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Headset Mic Switch' off"cset "name='RECMIXL BST1 Switch' off"cset "name='RECMIXR BST1 Switch' off"cset "name='Sto1 ADC MIXL ADC1 Switch' off"cset "name='Sto1 ADC MIXR ADC1 Switch' off"# Undo data-stream reception mono-mix workaroundcset "name='codec_in rx deinterleaver codec_in0_1' 2"- ]
- Value {
CaptureChannels "2"JackControl "Headset Mic Jack"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/Makefile.am b/src/conf/ucm/codecs/rt5672/Makefile.am new file mode 100644 index 00000000..feba0b76 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Makefile.am @@ -0,0 +1,5 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/codecs/rt5672 +ucm_DATA = DMIC1.conf DMIC2.conf EnableSeq.conf HeadPhones.conf \
HeadsetMic.conf MonoSpeaker.conf Speaker.conf+EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf new file mode 100644 index 00000000..828a1154 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf @@ -0,0 +1,26 @@ +SectionDevice."MonoSpeaker" {
- Comment "Mono Speaker"
- ConflictingDevice [
"Speaker""Headphones"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Stereo DAC MIXR DAC R1 Switch' off"cset "name='Stereo DAC MIXL DAC R1 Switch' on"cset "name='Ext Spk Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' off"cset "name='Stereo DAC MIXL DAC R1 Switch' off"cset "name='Stereo DAC MIXR DAC R1 Switch' on"- ]
- Value {
PlaybackChannels "2"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/Speaker.conf b/src/conf/ucm/codecs/rt5672/Speaker.conf new file mode 100644 index 00000000..f9291e53 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Speaker.conf @@ -0,0 +1,22 @@ +SectionDevice."Speaker" {
- Comment "Speakers"
- ConflictingDevice [
"MonoSpeaker""Headphones"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' off"- ]
- Value {
PlaybackChannels "2"- }
+}
2.23.0
Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
On Mon, 02 Sep 2019 10:31:30 +0200, Hans de Goede wrote:
Hi Takashi,
On 02-09-19 09:07, Takashi Iwai wrote:
On Sat, 31 Aug 2019 16:58:41 +0200, Hans de Goede wrote:
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/rt5672 dir with codec specific enable / disable sequences for the various inputs and outputs.
This is partly based on earlier work done here: https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Signed-off-by: Hans de Goede hdegoede@redhat.com
We've recently set up a new alsa-ucm-conf repo for keeping UCM profiles outside alsa-lib repo. The new repo has a different license (BSD3-Clause) for easily adapting to OSes with license restriction.
I guess we should put the stuff there from now on, as much as possible? The handling of UCM profile is currently pending, and we need to decide the general policy, as well as how to transfer the existing profiles to the new repo...
I think it is good that we now have a separate repo and I'm fine with re-licensing all my UCM profile work under a BSD3-Clause license.
But I believe that until we have actually figured out how this is all going to work and we are actually doing releases from the new alsa-ucm-conf repo, we should keep adding new profiles to alsa-lib for now, because these profiles are necessary for things to work OOTB for our end users.
Well, putting to both repos isn't a good idea from the packaging POV, either. If we're going to release the alsa-ucm-conf sooner or later together with the next alsa-lib release, we can put into the new repo from the beginning.
Other than that, I'm fine to put to alsa-lib at first.
thanks,
Takashi
Regards,
Hans
configure.ac | 2 + src/conf/ucm/Makefile.am | 1 + src/conf/ucm/cht-bsw-rt5672/HiFi.conf | 27 +++++++++++ src/conf/ucm/cht-bsw-rt5672/Makefile.am | 4 ++ .../ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf | 6 +++ src/conf/ucm/codecs/Makefile.am | 1 + src/conf/ucm/codecs/rt5672/DMIC1.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/DMIC2.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/EnableSeq.conf | 48 +++++++++++++++++++ src/conf/ucm/codecs/rt5672/HeadPhones.conf | 23 +++++++++ src/conf/ucm/codecs/rt5672/HeadsetMic.conf | 38 +++++++++++++++ src/conf/ucm/codecs/rt5672/Makefile.am | 5 ++ src/conf/ucm/codecs/rt5672/MonoSpeaker.conf | 26 ++++++++++ src/conf/ucm/codecs/rt5672/Speaker.conf | 22 +++++++++ 14 files changed, 259 insertions(+) create mode 100644 src/conf/ucm/cht-bsw-rt5672/HiFi.conf create mode 100644 src/conf/ucm/cht-bsw-rt5672/Makefile.am create mode 100644 src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC1.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC2.conf create mode 100644 src/conf/ucm/codecs/rt5672/EnableSeq.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadPhones.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadsetMic.conf create mode 100644 src/conf/ucm/codecs/rt5672/Makefile.am create mode 100644 src/conf/ucm/codecs/rt5672/MonoSpeaker.conf create mode 100644 src/conf/ucm/codecs/rt5672/Speaker.conf
diff --git a/configure.ac b/configure.ac index 2e955760..9ccca7aa 100644 --- a/configure.ac +++ b/configure.ac @@ -741,6 +741,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/bytcr-rt5651-stereo-spk-in1-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in2-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in12-mic/Makefile \
src/conf/ucm/cht-bsw-rt5672/Makefile \@@ -772,6 +773,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/codecs/rt5640/Makefile \ src/conf/ucm/codecs/rt5645/Makefile \ src/conf/ucm/codecs/rt5651/Makefile \
src/conf/ucm/codecs/rt5672/Makefile \diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index 02257048..2ed4e1a3 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -25,6 +25,7 @@ bytcr-rt5651-stereo-spk-dmic-mic \ bytcr-rt5651-stereo-spk-in1-mic \ bytcr-rt5651-stereo-spk-in2-mic \ bytcr-rt5651-stereo-spk-in12-mic \ +cht-bsw-rt5672 \ chtnau8824 \ chtrt5645 \ chtrt5645-mono-speaker-analog-mic \ diff --git a/src/conf/ucm/cht-bsw-rt5672/HiFi.conf b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf new file mode 100644 index 00000000..b83099d8 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf @@ -0,0 +1,27 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionVerb {
- EnableSequence [
cdev "hw:chtbswrt5672"<platforms/bytcr/PlatformEnableSeq.conf><codecs/rt5672/EnableSeq.conf>- ]
- DisableSequence [
cdev "hw:chtbswrt5672"<platforms/bytcr/PlatformDisableSeq.conf>- ]
- Value {
PlaybackPCM "hw:chtbswrt5672"CapturePCM "hw:chtbswrt5672"- }
+}
+<codecs/rt5672/Speaker.conf> +<codecs/rt5672/MonoSpeaker.conf> +<codecs/rt5672/HeadPhones.conf>
+<codecs/rt5672/DMIC1.conf> +<codecs/rt5672/DMIC2.conf> +<codecs/rt5672/HeadsetMic.conf> diff --git a/src/conf/ucm/cht-bsw-rt5672/Makefile.am b/src/conf/ucm/cht-bsw-rt5672/Makefile.am new file mode 100644 index 00000000..c3d557fa --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/cht-bsw-rt5672 +ucm_DATA = cht-bsw-rt5672.conf HiFi.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf new file mode 100644 index 00000000..c79024d9 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf @@ -0,0 +1,6 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionUseCase."HiFi" {
- File "HiFi.conf"
- Comment "Play HiFi quality Music"
+} diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am index 5987b9cf..17c4ebf9 100644 --- a/src/conf/ucm/codecs/Makefile.am +++ b/src/conf/ucm/codecs/Makefile.am @@ -4,4 +4,5 @@ es8316 \ rt5640 \ rt5645 \ rt5651 \ +rt5672 \ nau8824 diff --git a/src/conf/ucm/codecs/rt5672/DMIC1.conf b/src/conf/ucm/codecs/rt5672/DMIC1.conf new file mode 100644 index 00000000..9a8db1a5 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC1.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC1" {
- Comment "Internal Digital Microphone on DMIC1"
- ConflictingDevice [
"DigitalMic-DMIC2""HeadsetMic"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' on"cset "name='Stereo1 DMIC Mux' DMIC1"cset "name='Stereo1 ADC 2 Mux' DMIC"cset "name='Sto1 ADC MIXL ADC2 Switch' on"cset "name='Sto1 ADC MIXR ADC2 Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' off"cset "name='Sto1 ADC MIXL ADC2 Switch' off"cset "name='Sto1 ADC MIXR ADC2 Switch' off"- ]
- Value {
CaptureChannels 2- }
+} diff --git a/src/conf/ucm/codecs/rt5672/DMIC2.conf b/src/conf/ucm/codecs/rt5672/DMIC2.conf new file mode 100644 index 00000000..b960436e --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC2.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC2" {
- Comment "Internal Digital Microphone on DMIC2"
- ConflictingDevice [
"DigitalMic-DMIC1""HeadsetMic"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' on"cset "name='Stereo1 DMIC Mux' DMIC2"cset "name='Stereo1 ADC 2 Mux' DMIC"cset "name='Sto1 ADC MIXL ADC2 Switch' on"cset "name='Sto1 ADC MIXR ADC2 Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' off"cset "name='Sto1 ADC MIXL ADC2 Switch' off"cset "name='Sto1 ADC MIXR ADC2 Switch' off"- ]
- Value {
CaptureChannels 2- }
+} diff --git a/src/conf/ucm/codecs/rt5672/EnableSeq.conf b/src/conf/ucm/codecs/rt5672/EnableSeq.conf new file mode 100644 index 00000000..bd4f357c --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/EnableSeq.conf @@ -0,0 +1,48 @@ +# Playback (I2S1)
+# common +cset "name='DAC1 L Mux' IF1 DAC" +cset "name='DAC1 R Mux' IF1 DAC" +cset "name='DAC1 MIXL DAC1 Switch' on" +cset "name='DAC1 MIXR DAC1 Switch' on" +cset "name='Stereo DAC MIXL DAC L1 Switch' on" +cset "name='Stereo DAC MIXL DAC R1 Switch' off" +cset "name='Stereo DAC MIXR DAC R1 Switch' on" +cset "name='Stereo DAC MIXR DAC L1 Switch' off"
+# speaker +cset "name='PDM1 L Mux' Stereo DAC" +cset "name='PDM1 R Mux' Stereo DAC"
+# headphone +cset "name='HPOVOL MIXL DAC1 Switch' on" +cset "name='HPOVOL MIXR DAC1 Switch' on" +cset "name='HPO MIX HPVOL Switch' on"
+# line out +# cset "name='OUT MIXL DAC L1 Switch' on" +# cset "name='OUT MIXR DAC R1 Switch' on" +# cset "name='LOUT MIX OUTMIX L Switch' on" +# cset "name='LOUT MIX OUTMIX R Switch' on"
+# 47=0dB, 0.375 dB/step +cset "name='ADC Capture Volume' 47" +cset "name='ADC Capture Switch' on"
+# Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first +# available boost step +cset "name='IN1 Boost Volume' 1"
+# Start with all outputs / inputs disabled +cset "name='Ext Spk Switch' off" +cset "name='Headphone Switch' off" +cset "name='Int Mic Switch' off" +cset "name='Headset Mic Switch' off" +cset "name='Sto1 ADC MIXL ADC1 Switch' off" +cset "name='Sto1 ADC MIXR ADC1 Switch' off" +cset "name='Sto1 ADC MIXL ADC2 Switch' off" +cset "name='Sto1 ADC MIXR ADC2 Switch' off" +cset "name='RECMIXL BST1 Switch' off" +cset "name='RECMIXR BST1 Switch' off" +cset "name='RECMIXL BST2 Switch' off" +cset "name='RECMIXR BST2 Switch' off" diff --git a/src/conf/ucm/codecs/rt5672/HeadPhones.conf b/src/conf/ucm/codecs/rt5672/HeadPhones.conf new file mode 100644 index 00000000..cb8aad2d --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadPhones.conf @@ -0,0 +1,23 @@ +SectionDevice."Headphones" {
- Comment "Headphones"
- ConflictingDevice [
"Speaker""MonoSpeaker"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Headphone Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Headphone Switch' off"- ]
- Value {
PlaybackChannels "2"JackControl "Headphone Jack"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/HeadsetMic.conf b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf new file mode 100644 index 00000000..cc6d8d56 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf @@ -0,0 +1,38 @@ +SectionDevice."HeadsetMic" {
- Comment "Headset Microphone"
- ConflictingDevice [
"DigitalMic-DMIC1""DigitalMic-DMIC2"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Headset Mic Switch' on"cset "name='RECMIXL BST1 Switch' on"cset "name='RECMIXR BST1 Switch' on"cset "name='Sto1 ADC MIXL ADC1 Switch' on"cset "name='Sto1 ADC MIXR ADC1 Switch' on"# For unknown reasons the headset mic sound is only recorded# on the left channel, we tweak the data-stream reception to# use the left samples for both slots, so that we get a stereo# stream with the mic sound on both channelscset "name='codec_in rx deinterleaver codec_in0_1' 1"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Headset Mic Switch' off"cset "name='RECMIXL BST1 Switch' off"cset "name='RECMIXR BST1 Switch' off"cset "name='Sto1 ADC MIXL ADC1 Switch' off"cset "name='Sto1 ADC MIXR ADC1 Switch' off"# Undo data-stream reception mono-mix workaroundcset "name='codec_in rx deinterleaver codec_in0_1' 2"- ]
- Value {
CaptureChannels "2"JackControl "Headset Mic Jack"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/Makefile.am b/src/conf/ucm/codecs/rt5672/Makefile.am new file mode 100644 index 00000000..feba0b76 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Makefile.am @@ -0,0 +1,5 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/codecs/rt5672 +ucm_DATA = DMIC1.conf DMIC2.conf EnableSeq.conf HeadPhones.conf \
HeadsetMic.conf MonoSpeaker.conf Speaker.conf+EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf new file mode 100644 index 00000000..828a1154 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf @@ -0,0 +1,26 @@ +SectionDevice."MonoSpeaker" {
- Comment "Mono Speaker"
- ConflictingDevice [
"Speaker""Headphones"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Stereo DAC MIXR DAC R1 Switch' off"cset "name='Stereo DAC MIXL DAC R1 Switch' on"cset "name='Ext Spk Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' off"cset "name='Stereo DAC MIXL DAC R1 Switch' off"cset "name='Stereo DAC MIXR DAC R1 Switch' on"- ]
- Value {
PlaybackChannels "2"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/Speaker.conf b/src/conf/ucm/codecs/rt5672/Speaker.conf new file mode 100644 index 00000000..f9291e53 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Speaker.conf @@ -0,0 +1,22 @@ +SectionDevice."Speaker" {
- Comment "Speakers"
- ConflictingDevice [
"MonoSpeaker""Headphones"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' off"- ]
- Value {
PlaybackChannels "2"- }
+}
2.23.0
Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi,
On 02-09-19 17:32, Takashi Iwai wrote:
On Mon, 02 Sep 2019 10:31:30 +0200, Hans de Goede wrote:
Hi Takashi,
On 02-09-19 09:07, Takashi Iwai wrote:
On Sat, 31 Aug 2019 16:58:41 +0200, Hans de Goede wrote:
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/rt5672 dir with codec specific enable / disable sequences for the various inputs and outputs.
This is partly based on earlier work done here: https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Signed-off-by: Hans de Goede hdegoede@redhat.com
We've recently set up a new alsa-ucm-conf repo for keeping UCM profiles outside alsa-lib repo. The new repo has a different license (BSD3-Clause) for easily adapting to OSes with license restriction.
I guess we should put the stuff there from now on, as much as possible? The handling of UCM profile is currently pending, and we need to decide the general policy, as well as how to transfer the existing profiles to the new repo...
I think it is good that we now have a separate repo and I'm fine with re-licensing all my UCM profile work under a BSD3-Clause license.
But I believe that until we have actually figured out how this is all going to work and we are actually doing releases from the new alsa-ucm-conf repo, we should keep adding new profiles to alsa-lib for now, because these profiles are necessary for things to work OOTB for our end users.
Well, putting to both repos isn't a good idea from the packaging POV, either. If we're going to release the alsa-ucm-conf sooner or later together with the next alsa-lib release, we can put into the new repo from the beginning.
Well, we want to move some of the other UCM profiles over too, right? (I guess eventually we want to move all of them over)
So we are going to have this duplicate profile problem anyways.
I was thinking of adding a --without-duplicate-ucm-profiles option to alsa-lib's ./configure which when used disables installation of UCM profiles which have a copy in the new alsa-ucm-conf.
This will give use a transition period, where distros can choose to either use alsa-lib with --without-duplicate-ucm-profiles + the new alsa-ucm-conf, or just use alsa-lib as they have before. Note the idea is for this to be temporary, eventually the profiles which are "disabled" by --without-duplicate-ucm-profiles can be dropped and the option removed.
OTOH if you plan to make sure that the next alsa-lib release is done in sync with the first alsa-ucm-conf release and you plan to move the UCM profiles which can be moved (licensing) before that, giving us a clean break, then that is fine too.
Regards,
Hans
Dne 03. 09. 19 v 9:47 Hans de Goede napsal(a):
Hi,
On 02-09-19 17:32, Takashi Iwai wrote:
On Mon, 02 Sep 2019 10:31:30 +0200, Hans de Goede wrote:
Hi Takashi,
On 02-09-19 09:07, Takashi Iwai wrote:
On Sat, 31 Aug 2019 16:58:41 +0200, Hans de Goede wrote:
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/rt5672 dir with codec specific enable / disable sequences for the various inputs and outputs.
This is partly based on earlier work done here: https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Signed-off-by: Hans de Goede hdegoede@redhat.com
We've recently set up a new alsa-ucm-conf repo for keeping UCM profiles outside alsa-lib repo. The new repo has a different license (BSD3-Clause) for easily adapting to OSes with license restriction.
I guess we should put the stuff there from now on, as much as possible? The handling of UCM profile is currently pending, and we need to decide the general policy, as well as how to transfer the existing profiles to the new repo...
I think it is good that we now have a separate repo and I'm fine with re-licensing all my UCM profile work under a BSD3-Clause license.
But I believe that until we have actually figured out how this is all going to work and we are actually doing releases from the new alsa-ucm-conf repo, we should keep adding new profiles to alsa-lib for now, because these profiles are necessary for things to work OOTB for our end users.
Well, putting to both repos isn't a good idea from the packaging POV, either. If we're going to release the alsa-ucm-conf sooner or later together with the next alsa-lib release, we can put into the new repo from the beginning.
Well, we want to move some of the other UCM profiles over too, right? (I guess eventually we want to move all of them over)
So we are going to have this duplicate profile problem anyways.
I was thinking of adding a --without-duplicate-ucm-profiles option to alsa-lib's ./configure which when used disables installation of UCM profiles which have a copy in the new alsa-ucm-conf.
This will give use a transition period, where distros can choose to either use alsa-lib with --without-duplicate-ucm-profiles + the new alsa-ucm-conf, or just use alsa-lib as they have before. Note the idea is for this to be temporary, eventually the profiles which are "disabled" by --without-duplicate-ucm-profiles can be dropped and the option removed.
OTOH if you plan to make sure that the next alsa-lib release is done in sync with the first alsa-ucm-conf release and you plan to move the UCM profiles which can be moved (licensing) before that, giving us a clean break, then that is fine too.
Yes, that sounds good. I will also try to send e-mail to all authors for the permission to change the licence to BSD3-Clause license. Perhaps, we can get all agreements before the next alsa-lib is released, so all UCM profiles will be moved to the new repository and the configuration option --without-duplicate-ucm-profiles will not be required.
Jaroslav
On 8/31/19 9:58 AM, Hans de Goede wrote:
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/rt5672 dir with codec specific enable / disable sequences for the various inputs and outputs.
This is partly based on earlier work done here: https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Thanks for restarting this Hans.
I can't recall if I did any work here, took default settings from Bard Liao (when he was a Realtek) or if I just took examples from a Chromebook UCM file. I know there's a Dell tablet which uses this codec, but I just can't recall other devices.
Also how does the selection of the configs work, I don't see the same thing as in bytcr_rt5640/51 to play with the card long name and quirks. Do you expect the user to select the 'right' configs based on experimental trial-and-error.
Signed-off-by: Hans de Goede hdegoede@redhat.com
configure.ac | 2 + src/conf/ucm/Makefile.am | 1 + src/conf/ucm/cht-bsw-rt5672/HiFi.conf | 27 +++++++++++ src/conf/ucm/cht-bsw-rt5672/Makefile.am | 4 ++ .../ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf | 6 +++ src/conf/ucm/codecs/Makefile.am | 1 + src/conf/ucm/codecs/rt5672/DMIC1.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/DMIC2.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/EnableSeq.conf | 48 +++++++++++++++++++ src/conf/ucm/codecs/rt5672/HeadPhones.conf | 23 +++++++++ src/conf/ucm/codecs/rt5672/HeadsetMic.conf | 38 +++++++++++++++ src/conf/ucm/codecs/rt5672/Makefile.am | 5 ++ src/conf/ucm/codecs/rt5672/MonoSpeaker.conf | 26 ++++++++++ src/conf/ucm/codecs/rt5672/Speaker.conf | 22 +++++++++ 14 files changed, 259 insertions(+) create mode 100644 src/conf/ucm/cht-bsw-rt5672/HiFi.conf create mode 100644 src/conf/ucm/cht-bsw-rt5672/Makefile.am create mode 100644 src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC1.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC2.conf create mode 100644 src/conf/ucm/codecs/rt5672/EnableSeq.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadPhones.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadsetMic.conf create mode 100644 src/conf/ucm/codecs/rt5672/Makefile.am create mode 100644 src/conf/ucm/codecs/rt5672/MonoSpeaker.conf create mode 100644 src/conf/ucm/codecs/rt5672/Speaker.conf
diff --git a/configure.ac b/configure.ac index 2e955760..9ccca7aa 100644 --- a/configure.ac +++ b/configure.ac @@ -741,6 +741,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/bytcr-rt5651-stereo-spk-in1-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in2-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in12-mic/Makefile \
src/conf/ucm/cht-bsw-rt5672/Makefile \@@ -772,6 +773,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/codecs/rt5640/Makefile \ src/conf/ucm/codecs/rt5645/Makefile \ src/conf/ucm/codecs/rt5651/Makefile \
src/conf/ucm/codecs/rt5672/Makefile \diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index 02257048..2ed4e1a3 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -25,6 +25,7 @@ bytcr-rt5651-stereo-spk-dmic-mic \ bytcr-rt5651-stereo-spk-in1-mic \ bytcr-rt5651-stereo-spk-in2-mic \ bytcr-rt5651-stereo-spk-in12-mic \ +cht-bsw-rt5672 \ chtnau8824 \ chtrt5645 \ chtrt5645-mono-speaker-analog-mic \ diff --git a/src/conf/ucm/cht-bsw-rt5672/HiFi.conf b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf new file mode 100644 index 00000000..b83099d8 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf @@ -0,0 +1,27 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionVerb {
- EnableSequence [
cdev "hw:chtbswrt5672"<platforms/bytcr/PlatformEnableSeq.conf><codecs/rt5672/EnableSeq.conf>- ]
- DisableSequence [
cdev "hw:chtbswrt5672"<platforms/bytcr/PlatformDisableSeq.conf>- ]
- Value {
PlaybackPCM "hw:chtbswrt5672"CapturePCM "hw:chtbswrt5672"- }
+}
+<codecs/rt5672/Speaker.conf> +<codecs/rt5672/MonoSpeaker.conf> +<codecs/rt5672/HeadPhones.conf>
+<codecs/rt5672/DMIC1.conf> +<codecs/rt5672/DMIC2.conf> +<codecs/rt5672/HeadsetMic.conf> diff --git a/src/conf/ucm/cht-bsw-rt5672/Makefile.am b/src/conf/ucm/cht-bsw-rt5672/Makefile.am new file mode 100644 index 00000000..c3d557fa --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/cht-bsw-rt5672 +ucm_DATA = cht-bsw-rt5672.conf HiFi.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf new file mode 100644 index 00000000..c79024d9 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf @@ -0,0 +1,6 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionUseCase."HiFi" {
- File "HiFi.conf"
- Comment "Play HiFi quality Music"
+} diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am index 5987b9cf..17c4ebf9 100644 --- a/src/conf/ucm/codecs/Makefile.am +++ b/src/conf/ucm/codecs/Makefile.am @@ -4,4 +4,5 @@ es8316 \ rt5640 \ rt5645 \ rt5651 \ +rt5672 \ nau8824 diff --git a/src/conf/ucm/codecs/rt5672/DMIC1.conf b/src/conf/ucm/codecs/rt5672/DMIC1.conf new file mode 100644 index 00000000..9a8db1a5 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC1.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC1" {
- Comment "Internal Digital Microphone on DMIC1"
- ConflictingDevice [
"DigitalMic-DMIC2""HeadsetMic"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' on"cset "name='Stereo1 DMIC Mux' DMIC1"cset "name='Stereo1 ADC 2 Mux' DMIC"cset "name='Sto1 ADC MIXL ADC2 Switch' on"cset "name='Sto1 ADC MIXR ADC2 Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' off"cset "name='Sto1 ADC MIXL ADC2 Switch' off"cset "name='Sto1 ADC MIXR ADC2 Switch' off"- ]
- Value {
CaptureChannels 2- }
+} diff --git a/src/conf/ucm/codecs/rt5672/DMIC2.conf b/src/conf/ucm/codecs/rt5672/DMIC2.conf new file mode 100644 index 00000000..b960436e --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC2.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC2" {
- Comment "Internal Digital Microphone on DMIC2"
- ConflictingDevice [
"DigitalMic-DMIC1""HeadsetMic"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' on"cset "name='Stereo1 DMIC Mux' DMIC2"cset "name='Stereo1 ADC 2 Mux' DMIC"cset "name='Sto1 ADC MIXL ADC2 Switch' on"cset "name='Sto1 ADC MIXR ADC2 Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Int Mic Switch' off"cset "name='Sto1 ADC MIXL ADC2 Switch' off"cset "name='Sto1 ADC MIXR ADC2 Switch' off"- ]
- Value {
CaptureChannels 2- }
+} diff --git a/src/conf/ucm/codecs/rt5672/EnableSeq.conf b/src/conf/ucm/codecs/rt5672/EnableSeq.conf new file mode 100644 index 00000000..bd4f357c --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/EnableSeq.conf @@ -0,0 +1,48 @@ +# Playback (I2S1)
+# common +cset "name='DAC1 L Mux' IF1 DAC" +cset "name='DAC1 R Mux' IF1 DAC" +cset "name='DAC1 MIXL DAC1 Switch' on" +cset "name='DAC1 MIXR DAC1 Switch' on" +cset "name='Stereo DAC MIXL DAC L1 Switch' on" +cset "name='Stereo DAC MIXL DAC R1 Switch' off" +cset "name='Stereo DAC MIXR DAC R1 Switch' on" +cset "name='Stereo DAC MIXR DAC L1 Switch' off"
+# speaker +cset "name='PDM1 L Mux' Stereo DAC" +cset "name='PDM1 R Mux' Stereo DAC"
+# headphone +cset "name='HPOVOL MIXL DAC1 Switch' on" +cset "name='HPOVOL MIXR DAC1 Switch' on" +cset "name='HPO MIX HPVOL Switch' on"
+# line out +# cset "name='OUT MIXL DAC L1 Switch' on" +# cset "name='OUT MIXR DAC R1 Switch' on" +# cset "name='LOUT MIX OUTMIX L Switch' on" +# cset "name='LOUT MIX OUTMIX R Switch' on"
+# 47=0dB, 0.375 dB/step +cset "name='ADC Capture Volume' 47" +cset "name='ADC Capture Switch' on"
+# Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first +# available boost step +cset "name='IN1 Boost Volume' 1"
+# Start with all outputs / inputs disabled +cset "name='Ext Spk Switch' off" +cset "name='Headphone Switch' off" +cset "name='Int Mic Switch' off" +cset "name='Headset Mic Switch' off" +cset "name='Sto1 ADC MIXL ADC1 Switch' off" +cset "name='Sto1 ADC MIXR ADC1 Switch' off" +cset "name='Sto1 ADC MIXL ADC2 Switch' off" +cset "name='Sto1 ADC MIXR ADC2 Switch' off" +cset "name='RECMIXL BST1 Switch' off" +cset "name='RECMIXR BST1 Switch' off" +cset "name='RECMIXL BST2 Switch' off" +cset "name='RECMIXR BST2 Switch' off" diff --git a/src/conf/ucm/codecs/rt5672/HeadPhones.conf b/src/conf/ucm/codecs/rt5672/HeadPhones.conf new file mode 100644 index 00000000..cb8aad2d --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadPhones.conf @@ -0,0 +1,23 @@ +SectionDevice."Headphones" {
- Comment "Headphones"
- ConflictingDevice [
"Speaker""MonoSpeaker"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Headphone Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Headphone Switch' off"- ]
- Value {
PlaybackChannels "2"JackControl "Headphone Jack"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/HeadsetMic.conf b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf new file mode 100644 index 00000000..cc6d8d56 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf @@ -0,0 +1,38 @@ +SectionDevice."HeadsetMic" {
- Comment "Headset Microphone"
- ConflictingDevice [
"DigitalMic-DMIC1""DigitalMic-DMIC2"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Headset Mic Switch' on"cset "name='RECMIXL BST1 Switch' on"cset "name='RECMIXR BST1 Switch' on"cset "name='Sto1 ADC MIXL ADC1 Switch' on"cset "name='Sto1 ADC MIXR ADC1 Switch' on"# For unknown reasons the headset mic sound is only recorded# on the left channel, we tweak the data-stream reception to# use the left samples for both slots, so that we get a stereo# stream with the mic sound on both channelscset "name='codec_in rx deinterleaver codec_in0_1' 1"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Headset Mic Switch' off"cset "name='RECMIXL BST1 Switch' off"cset "name='RECMIXR BST1 Switch' off"cset "name='Sto1 ADC MIXL ADC1 Switch' off"cset "name='Sto1 ADC MIXR ADC1 Switch' off"# Undo data-stream reception mono-mix workaroundcset "name='codec_in rx deinterleaver codec_in0_1' 2"- ]
- Value {
CaptureChannels "2"JackControl "Headset Mic Jack"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/Makefile.am b/src/conf/ucm/codecs/rt5672/Makefile.am new file mode 100644 index 00000000..feba0b76 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Makefile.am @@ -0,0 +1,5 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/codecs/rt5672 +ucm_DATA = DMIC1.conf DMIC2.conf EnableSeq.conf HeadPhones.conf \
HeadsetMic.conf MonoSpeaker.conf Speaker.conf+EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf new file mode 100644 index 00000000..828a1154 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf @@ -0,0 +1,26 @@ +SectionDevice."MonoSpeaker" {
- Comment "Mono Speaker"
- ConflictingDevice [
"Speaker""Headphones"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Stereo DAC MIXR DAC R1 Switch' off"cset "name='Stereo DAC MIXL DAC R1 Switch' on"cset "name='Ext Spk Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' off"cset "name='Stereo DAC MIXL DAC R1 Switch' off"cset "name='Stereo DAC MIXR DAC R1 Switch' on"- ]
- Value {
PlaybackChannels "2"- }
+} diff --git a/src/conf/ucm/codecs/rt5672/Speaker.conf b/src/conf/ucm/codecs/rt5672/Speaker.conf new file mode 100644 index 00000000..f9291e53 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Speaker.conf @@ -0,0 +1,22 @@ +SectionDevice."Speaker" {
- Comment "Speakers"
- ConflictingDevice [
"MonoSpeaker""Headphones"- ]
- EnableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' on"- ]
- DisableSequence [
cdev "hw:chtbswrt5672"cset "name='Ext Spk Switch' off"- ]
- Value {
PlaybackChannels "2"- }
+}
Hi,
On 03-09-19 16:09, Pierre-Louis Bossart wrote:
On 8/31/19 9:58 AM, Hans de Goede wrote:
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST support and add a codecs/rt5672 dir with codec specific enable / disable sequences for the various inputs and outputs.
This is partly based on earlier work done here: https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Thanks for restarting this Hans.
I can't recall if I did any work here, took default settings from Bard Liao (when he was a Realtek) or if I just took examples from a Chromebook UCM file. I know there's a Dell tablet which uses this codec, but I just can't recall other devices.
I only have the Lenovo Thinkpad 8 with this codec.
Also how does the selection of the configs work, I don't see the same thing as in bytcr_rt5640/51 to play with the card long name and quirks. Do you expect the user to select the 'right' configs based on experimental trial-and-error.
Like with the chtrt5645 and chtnau8824 there is no need for any kernel side quirks depending on the input/output config.
So the plan is to have a default profile which allows selecting all possible inputs / outputs (including ones not present) and then have DMI name based profiles, like the profile added for the Lenovo Thinkpad 8 in the second patch in this series, which only include the relevant inputs / outputs for that specific device (as we are doing already for the chtrt5645 and chtnau8824 profiles)
Regards,
Hans
Signed-off-by: Hans de Goede hdegoede@redhat.com
configure.ac | 2 + src/conf/ucm/Makefile.am | 1 + src/conf/ucm/cht-bsw-rt5672/HiFi.conf | 27 +++++++++++ src/conf/ucm/cht-bsw-rt5672/Makefile.am | 4 ++ .../ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf | 6 +++ src/conf/ucm/codecs/Makefile.am | 1 + src/conf/ucm/codecs/rt5672/DMIC1.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/DMIC2.conf | 28 +++++++++++ src/conf/ucm/codecs/rt5672/EnableSeq.conf | 48 +++++++++++++++++++ src/conf/ucm/codecs/rt5672/HeadPhones.conf | 23 +++++++++ src/conf/ucm/codecs/rt5672/HeadsetMic.conf | 38 +++++++++++++++ src/conf/ucm/codecs/rt5672/Makefile.am | 5 ++ src/conf/ucm/codecs/rt5672/MonoSpeaker.conf | 26 ++++++++++ src/conf/ucm/codecs/rt5672/Speaker.conf | 22 +++++++++ 14 files changed, 259 insertions(+) create mode 100644 src/conf/ucm/cht-bsw-rt5672/HiFi.conf create mode 100644 src/conf/ucm/cht-bsw-rt5672/Makefile.am create mode 100644 src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC1.conf create mode 100644 src/conf/ucm/codecs/rt5672/DMIC2.conf create mode 100644 src/conf/ucm/codecs/rt5672/EnableSeq.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadPhones.conf create mode 100644 src/conf/ucm/codecs/rt5672/HeadsetMic.conf create mode 100644 src/conf/ucm/codecs/rt5672/Makefile.am create mode 100644 src/conf/ucm/codecs/rt5672/MonoSpeaker.conf create mode 100644 src/conf/ucm/codecs/rt5672/Speaker.conf
diff --git a/configure.ac b/configure.ac index 2e955760..9ccca7aa 100644 --- a/configure.ac +++ b/configure.ac @@ -741,6 +741,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/bytcr-rt5651-stereo-spk-in1-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in2-mic/Makefile \ src/conf/ucm/bytcr-rt5651-stereo-spk-in12-mic/Makefile \ + src/conf/ucm/cht-bsw-rt5672/Makefile \ src/conf/ucm/chtnau8824/Makefile \ src/conf/ucm/chtrt5645/Makefile \ src/conf/ucm/chtrt5645-mono-speaker-analog-mic/Makefile \ @@ -772,6 +773,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/codecs/rt5640/Makefile \ src/conf/ucm/codecs/rt5645/Makefile \ src/conf/ucm/codecs/rt5651/Makefile \ + src/conf/ucm/codecs/rt5672/Makefile \ src/conf/ucm/platforms/Makefile \ src/conf/ucm/platforms/bytcr/Makefile \ src/conf/topology/Makefile \ diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index 02257048..2ed4e1a3 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -25,6 +25,7 @@ bytcr-rt5651-stereo-spk-dmic-mic \ bytcr-rt5651-stereo-spk-in1-mic \ bytcr-rt5651-stereo-spk-in2-mic \ bytcr-rt5651-stereo-spk-in12-mic \ +cht-bsw-rt5672 \ chtnau8824 \ chtrt5645 \ chtrt5645-mono-speaker-analog-mic \ diff --git a/src/conf/ucm/cht-bsw-rt5672/HiFi.conf b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf new file mode 100644 index 00000000..b83099d8 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf @@ -0,0 +1,27 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionVerb { + EnableSequence [ + cdev "hw:chtbswrt5672" + <platforms/bytcr/PlatformEnableSeq.conf> + <codecs/rt5672/EnableSeq.conf> + ]
+ DisableSequence [ + cdev "hw:chtbswrt5672" + <platforms/bytcr/PlatformDisableSeq.conf> + ]
+ Value { + PlaybackPCM "hw:chtbswrt5672" + CapturePCM "hw:chtbswrt5672" + } +}
+<codecs/rt5672/Speaker.conf> +<codecs/rt5672/MonoSpeaker.conf> +<codecs/rt5672/HeadPhones.conf>
+<codecs/rt5672/DMIC1.conf> +<codecs/rt5672/DMIC2.conf> +<codecs/rt5672/HeadsetMic.conf> diff --git a/src/conf/ucm/cht-bsw-rt5672/Makefile.am b/src/conf/ucm/cht-bsw-rt5672/Makefile.am new file mode 100644 index 00000000..c3d557fa --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/cht-bsw-rt5672 +ucm_DATA = cht-bsw-rt5672.conf HiFi.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf new file mode 100644 index 00000000..c79024d9 --- /dev/null +++ b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf @@ -0,0 +1,6 @@ +# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+SectionUseCase."HiFi" { + File "HiFi.conf" + Comment "Play HiFi quality Music" +} diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am index 5987b9cf..17c4ebf9 100644 --- a/src/conf/ucm/codecs/Makefile.am +++ b/src/conf/ucm/codecs/Makefile.am @@ -4,4 +4,5 @@ es8316 \ rt5640 \ rt5645 \ rt5651 \ +rt5672 \ nau8824 diff --git a/src/conf/ucm/codecs/rt5672/DMIC1.conf b/src/conf/ucm/codecs/rt5672/DMIC1.conf new file mode 100644 index 00000000..9a8db1a5 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC1.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC1" { + Comment "Internal Digital Microphone on DMIC1"
+ ConflictingDevice [ + "DigitalMic-DMIC2" + "HeadsetMic" + ]
+ EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Int Mic Switch' on" + cset "name='Stereo1 DMIC Mux' DMIC1" + cset "name='Stereo1 ADC 2 Mux' DMIC" + cset "name='Sto1 ADC MIXL ADC2 Switch' on" + cset "name='Sto1 ADC MIXR ADC2 Switch' on" + ]
+ DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Int Mic Switch' off" + cset "name='Sto1 ADC MIXL ADC2 Switch' off" + cset "name='Sto1 ADC MIXR ADC2 Switch' off" + ]
+ Value { + CaptureChannels 2 + } +} diff --git a/src/conf/ucm/codecs/rt5672/DMIC2.conf b/src/conf/ucm/codecs/rt5672/DMIC2.conf new file mode 100644 index 00000000..b960436e --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/DMIC2.conf @@ -0,0 +1,28 @@ +SectionDevice."DigitalMic-DMIC2" { + Comment "Internal Digital Microphone on DMIC2"
+ ConflictingDevice [ + "DigitalMic-DMIC1" + "HeadsetMic" + ]
+ EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Int Mic Switch' on" + cset "name='Stereo1 DMIC Mux' DMIC2" + cset "name='Stereo1 ADC 2 Mux' DMIC" + cset "name='Sto1 ADC MIXL ADC2 Switch' on" + cset "name='Sto1 ADC MIXR ADC2 Switch' on" + ]
+ DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Int Mic Switch' off" + cset "name='Sto1 ADC MIXL ADC2 Switch' off" + cset "name='Sto1 ADC MIXR ADC2 Switch' off" + ]
+ Value { + CaptureChannels 2 + } +} diff --git a/src/conf/ucm/codecs/rt5672/EnableSeq.conf b/src/conf/ucm/codecs/rt5672/EnableSeq.conf new file mode 100644 index 00000000..bd4f357c --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/EnableSeq.conf @@ -0,0 +1,48 @@ +# Playback (I2S1)
+# common +cset "name='DAC1 L Mux' IF1 DAC" +cset "name='DAC1 R Mux' IF1 DAC" +cset "name='DAC1 MIXL DAC1 Switch' on" +cset "name='DAC1 MIXR DAC1 Switch' on" +cset "name='Stereo DAC MIXL DAC L1 Switch' on" +cset "name='Stereo DAC MIXL DAC R1 Switch' off" +cset "name='Stereo DAC MIXR DAC R1 Switch' on" +cset "name='Stereo DAC MIXR DAC L1 Switch' off"
+# speaker +cset "name='PDM1 L Mux' Stereo DAC" +cset "name='PDM1 R Mux' Stereo DAC"
+# headphone +cset "name='HPOVOL MIXL DAC1 Switch' on" +cset "name='HPOVOL MIXR DAC1 Switch' on" +cset "name='HPO MIX HPVOL Switch' on"
+# line out +# cset "name='OUT MIXL DAC L1 Switch' on" +# cset "name='OUT MIXR DAC R1 Switch' on" +# cset "name='LOUT MIX OUTMIX L Switch' on" +# cset "name='LOUT MIX OUTMIX R Switch' on"
+# 47=0dB, 0.375 dB/step +cset "name='ADC Capture Volume' 47" +cset "name='ADC Capture Switch' on"
+# Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first +# available boost step +cset "name='IN1 Boost Volume' 1"
+# Start with all outputs / inputs disabled +cset "name='Ext Spk Switch' off" +cset "name='Headphone Switch' off" +cset "name='Int Mic Switch' off" +cset "name='Headset Mic Switch' off" +cset "name='Sto1 ADC MIXL ADC1 Switch' off" +cset "name='Sto1 ADC MIXR ADC1 Switch' off" +cset "name='Sto1 ADC MIXL ADC2 Switch' off" +cset "name='Sto1 ADC MIXR ADC2 Switch' off" +cset "name='RECMIXL BST1 Switch' off" +cset "name='RECMIXR BST1 Switch' off" +cset "name='RECMIXL BST2 Switch' off" +cset "name='RECMIXR BST2 Switch' off" diff --git a/src/conf/ucm/codecs/rt5672/HeadPhones.conf b/src/conf/ucm/codecs/rt5672/HeadPhones.conf new file mode 100644 index 00000000..cb8aad2d --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadPhones.conf @@ -0,0 +1,23 @@ +SectionDevice."Headphones" { + Comment "Headphones"
+ ConflictingDevice [ + "Speaker" + "MonoSpeaker" + ]
+ EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Headphone Switch' on" + ]
+ DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Headphone Switch' off" + ]
+ Value { + PlaybackChannels "2" + JackControl "Headphone Jack" + } +} diff --git a/src/conf/ucm/codecs/rt5672/HeadsetMic.conf b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf new file mode 100644 index 00000000..cc6d8d56 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf @@ -0,0 +1,38 @@ +SectionDevice."HeadsetMic" { + Comment "Headset Microphone"
+ ConflictingDevice [ + "DigitalMic-DMIC1" + "DigitalMic-DMIC2" + ]
+ EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Headset Mic Switch' on" + cset "name='RECMIXL BST1 Switch' on" + cset "name='RECMIXR BST1 Switch' on" + cset "name='Sto1 ADC MIXL ADC1 Switch' on" + cset "name='Sto1 ADC MIXR ADC1 Switch' on" + # For unknown reasons the headset mic sound is only recorded + # on the left channel, we tweak the data-stream reception to + # use the left samples for both slots, so that we get a stereo + # stream with the mic sound on both channels + cset "name='codec_in rx deinterleaver codec_in0_1' 1" + ]
+ DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Headset Mic Switch' off" + cset "name='RECMIXL BST1 Switch' off" + cset "name='RECMIXR BST1 Switch' off" + cset "name='Sto1 ADC MIXL ADC1 Switch' off" + cset "name='Sto1 ADC MIXR ADC1 Switch' off" + # Undo data-stream reception mono-mix workaround + cset "name='codec_in rx deinterleaver codec_in0_1' 2" + ]
+ Value { + CaptureChannels "2" + JackControl "Headset Mic Jack" + } +} diff --git a/src/conf/ucm/codecs/rt5672/Makefile.am b/src/conf/ucm/codecs/rt5672/Makefile.am new file mode 100644 index 00000000..feba0b76 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Makefile.am @@ -0,0 +1,5 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/codecs/rt5672 +ucm_DATA = DMIC1.conf DMIC2.conf EnableSeq.conf HeadPhones.conf \ + HeadsetMic.conf MonoSpeaker.conf Speaker.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf new file mode 100644 index 00000000..828a1154 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf @@ -0,0 +1,26 @@ +SectionDevice."MonoSpeaker" { + Comment "Mono Speaker"
+ ConflictingDevice [ + "Speaker" + "Headphones" + ]
+ EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Stereo DAC MIXR DAC R1 Switch' off" + cset "name='Stereo DAC MIXL DAC R1 Switch' on" + cset "name='Ext Spk Switch' on" + ]
+ DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Ext Spk Switch' off" + cset "name='Stereo DAC MIXL DAC R1 Switch' off" + cset "name='Stereo DAC MIXR DAC R1 Switch' on" + ]
+ Value { + PlaybackChannels "2" + } +} diff --git a/src/conf/ucm/codecs/rt5672/Speaker.conf b/src/conf/ucm/codecs/rt5672/Speaker.conf new file mode 100644 index 00000000..f9291e53 --- /dev/null +++ b/src/conf/ucm/codecs/rt5672/Speaker.conf @@ -0,0 +1,22 @@ +SectionDevice."Speaker" { + Comment "Speakers"
+ ConflictingDevice [ + "MonoSpeaker" + "Headphones" + ]
+ EnableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Ext Spk Switch' on" + ]
+ DisableSequence [ + cdev "hw:chtbswrt5672" + cset "name='Ext Spk Switch' off" + ]
+ Value { + PlaybackChannels "2" + } +}
I can't recall if I did any work here, took default settings from Bard Liao (when he was a Realtek) or if I just took examples from a Chromebook UCM file. I know there's a Dell tablet which uses this codec, but I just can't recall other devices.
I only have the Lenovo Thinkpad 8 with this codec.
Also how does the selection of the configs work, I don't see the same thing as in bytcr_rt5640/51 to play with the card long name and quirks. Do you expect the user to select the 'right' configs based on experimental trial-and-error.
Like with the chtrt5645 and chtnau8824 there is no need for any kernel side quirks depending on the input/output config.
So the plan is to have a default profile which allows selecting all possible inputs / outputs (including ones not present) and then have DMI name based profiles, like the profile added for the Lenovo Thinkpad 8 in the second patch in this series, which only include the relevant inputs / outputs for that specific device (as we are doing already for the chtrt5645 and chtnau8824 profiles)
Makes sense, I am not aware of too many devices so DMI would work. I have a Dell Venue Pro 5855 which is one of the quirks for this codec.
participants (4)
-
Hans de Goede -
Jaroslav Kysela -
Pierre-Louis Bossart -
Takashi Iwai