[alsa-devel] [PATCH 0/4] More Line 6 cleanup
Not much to say about these other than what's in the commit log.
I was looking into what appeared to be a regression that was only reproducible outside of QEMU, but it turned out to be me pulling in the test/snd-device changes but testing against vanilla v3.19-rc7 ALSA modules. Fixing my process. :-)
Regards,
Chris
Chris Rorvick (4): ALSA: line6: Add toneport_has_source_select() ALSA: line6: Pass toneport pointer to toneport_has_led() ALSA: line6: Pass driver name to line6_probe() ALSA: line6: Remove `usb_' prefix from structs
sound/usb/line6/capture.c | 2 +- sound/usb/line6/driver.c | 45 +++++++++++----------- sound/usb/line6/driver.h | 25 ++++++------ sound/usb/line6/midi.c | 24 +++++------- sound/usb/line6/midi.h | 6 +-- sound/usb/line6/pcm.c | 5 +-- sound/usb/line6/pcm.h | 4 +- sound/usb/line6/playback.c | 2 +- sound/usb/line6/pod.c | 52 ++++++++++++------------- sound/usb/line6/podhd.c | 7 ++-- sound/usb/line6/toneport.c | 94 ++++++++++++++++++++++++---------------------- sound/usb/line6/variax.c | 41 ++++++++++---------- 12 files changed, 151 insertions(+), 156 deletions(-)
Add a predicate for testing if the device supports source selection to make the conditional logic around this a bit cleaner.
Signed-off-by: Chris Rorvick chris@rorvick.com --- sound/usb/line6/toneport.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index b107cf4..de56180a 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -343,6 +343,20 @@ static void toneport_remove_leds(struct usb_line6_toneport *toneport) } }
+static bool toneport_has_source_select(struct usb_line6_toneport *toneport) +{ + switch (toneport->type) { + case LINE6_TONEPORT_UX1: + case LINE6_TONEPORT_UX2: + case LINE6_PODSTUDIO_UX1: + case LINE6_PODSTUDIO_UX2: + return 1; + + default: + return 0; + } +} + /* Setup Toneport device. */ @@ -360,17 +374,10 @@ static void toneport_setup(struct usb_line6_toneport *toneport) toneport_send_cmd(usbdev, 0x0301, 0x0000);
/* initialize source select: */ - switch (toneport->type) { - case LINE6_TONEPORT_UX1: - case LINE6_TONEPORT_UX2: - case LINE6_PODSTUDIO_UX1: - case LINE6_PODSTUDIO_UX2: + if (toneport_has_source_select(toneport)) toneport_send_cmd(usbdev, toneport_source_info[toneport->source].code, 0x0000); - default: - break; - }
if (toneport_has_led(toneport->type)) toneport_update_led(toneport); @@ -421,20 +428,13 @@ static int toneport_init(struct usb_line6 *line6, return err;
/* register source select control: */ - switch (toneport->type) { - case LINE6_TONEPORT_UX1: - case LINE6_TONEPORT_UX2: - case LINE6_PODSTUDIO_UX1: - case LINE6_PODSTUDIO_UX2: + if (toneport_has_source_select(toneport)) { err = snd_ctl_add(line6->card, snd_ctl_new1(&toneport_control_source, line6->line6pcm)); if (err < 0) return err; - - default: - break; }
line6_read_serial_number(line6, &toneport->serial_number);
At Fri, 6 Feb 2015 08:51:09 -0600, Chris Rorvick wrote:
Add a predicate for testing if the device supports source selection to make the conditional logic around this a bit cleaner.
Signed-off-by: Chris Rorvick chris@rorvick.com
sound/usb/line6/toneport.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index b107cf4..de56180a 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -343,6 +343,20 @@ static void toneport_remove_leds(struct usb_line6_toneport *toneport) } }
+static bool toneport_has_source_select(struct usb_line6_toneport *toneport) +{
- switch (toneport->type) {
- case LINE6_TONEPORT_UX1:
- case LINE6_TONEPORT_UX2:
- case LINE6_PODSTUDIO_UX1:
- case LINE6_PODSTUDIO_UX2:
return 1;- default:
return 0;
Please use true and false.
Takashi
On Fri, Feb 6, 2015 at 8:56 AM, Takashi Iwai tiwai@suse.de wrote:
At Fri, 6 Feb 2015 08:51:09 -0600, Chris Rorvick wrote:
--- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -343,6 +343,20 @@ static void toneport_remove_leds(struct usb_line6_toneport *toneport) } }
+static bool toneport_has_source_select(struct usb_line6_toneport *toneport) +{
switch (toneport->type) {case LINE6_TONEPORT_UX1:case LINE6_TONEPORT_UX2:case LINE6_PODSTUDIO_UX1:case LINE6_PODSTUDIO_UX2:return 1;default:return 0;Please use true and false.
Thanks, I've fixed this up and will send in a v2.
Regards,
Chris
It is unlikely this function would ever be used in a context without a pointer to a `struct usb_line6_toneport', so grab the device type from it rather than having the caller do it.
Signed-off-by: Chris Rorvick chris@rorvick.com --- sound/usb/line6/toneport.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index de56180a..b2c0b2c 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -278,12 +278,17 @@ static struct snd_kcontrol_new toneport_control_source = { (void cmd_0x02(byte red, byte green) */
-static bool toneport_has_led(enum line6_device_type type) +static bool toneport_has_led(struct usb_line6_toneport *toneport) { - return - (type == LINE6_GUITARPORT) || - (type == LINE6_TONEPORT_GX); + switch (toneport->type) { + case LINE6_GUITARPORT: + case LINE6_TONEPORT_GX: /* add your device here if you are missing support for the LEDs */ + return 1; + + default: + return 0; + } }
static const char * const led_colors[2] = { "red", "green" }; @@ -379,7 +384,7 @@ static void toneport_setup(struct usb_line6_toneport *toneport) toneport_source_info[toneport->source].code, 0x0000);
- if (toneport_has_led(toneport->type)) + if (toneport_has_led(toneport)) toneport_update_led(toneport);
mod_timer(&toneport->timer, jiffies + TONEPORT_PCM_DELAY * HZ); @@ -395,7 +400,7 @@ static void line6_toneport_disconnect(struct usb_line6 *line6)
del_timer_sync(&toneport->timer);
- if (toneport_has_led(toneport->type)) + if (toneport_has_led(toneport)) toneport_remove_leds(toneport); }
@@ -440,7 +445,7 @@ static int toneport_init(struct usb_line6 *line6, line6_read_serial_number(line6, &toneport->serial_number); line6_read_data(line6, 0x80c2, &toneport->firmware_version, 1);
- if (toneport_has_led(toneport->type)) { + if (toneport_has_led(toneport)) { err = toneport_init_leds(toneport); if (err < 0) return err;
At Fri, 6 Feb 2015 08:51:10 -0600, Chris Rorvick wrote:
It is unlikely this function would ever be used in a context without a pointer to a `struct usb_line6_toneport', so grab the device type from it rather than having the caller do it.
Signed-off-by: Chris Rorvick chris@rorvick.com
sound/usb/line6/toneport.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index de56180a..b2c0b2c 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -278,12 +278,17 @@ static struct snd_kcontrol_new toneport_control_source = { (void cmd_0x02(byte red, byte green) */
-static bool toneport_has_led(enum line6_device_type type) +static bool toneport_has_led(struct usb_line6_toneport *toneport) {
- return
(type == LINE6_GUITARPORT) ||(type == LINE6_TONEPORT_GX);
- switch (toneport->type) {
- case LINE6_GUITARPORT:
- case LINE6_TONEPORT_GX: /* add your device here if you are missing support for the LEDs */
return 1;- default:
return 0;
Please use true and false.
Takashi
Provide a descriptive name for each driver instead of calling all of them "line6usb".
Signed-off-by: Chris Rorvick chris@rorvick.com --- sound/usb/line6/driver.c | 3 ++- sound/usb/line6/driver.h | 3 +-- sound/usb/line6/pod.c | 2 +- sound/usb/line6/podhd.c | 2 +- sound/usb/line6/toneport.c | 2 +- sound/usb/line6/variax.c | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index e2a2603..626b0c3 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -480,6 +480,7 @@ static int line6_init_cap_control(struct usb_line6 *line6) */ int line6_probe(struct usb_interface *interface, const struct usb_device_id *id, + const char *driver_name, const struct line6_properties *properties, int (*private_init)(struct usb_line6 *, const struct usb_device_id *id), size_t data_size) @@ -511,7 +512,7 @@ int line6_probe(struct usb_interface *interface, line6->ifcdev = &interface->dev;
strcpy(card->id, properties->id); - strcpy(card->driver, DRIVER_NAME); + strcpy(card->driver, driver_name); strcpy(card->shortname, properties->name); sprintf(card->longname, "Line 6 %s at USB %s", properties->name, dev_name(line6->ifcdev)); diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h index 2276b78..92a662a 100644 --- a/sound/usb/line6/driver.h +++ b/sound/usb/line6/driver.h @@ -18,8 +18,6 @@
#include "midi.h"
-#define DRIVER_NAME "line6usb" - #define USB_INTERVALS_PER_SECOND 1000
/* Fallback USB interval and max packet size values */ @@ -168,6 +166,7 @@ extern int line6_write_data(struct usb_line6 *line6, int address, void *data,
int line6_probe(struct usb_interface *interface, const struct usb_device_id *id, + const char *driver_name, const struct line6_properties *properties, int (*private_init)(struct usb_line6 *, const struct usb_device_id *id), size_t data_size); diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c index 61aadd7..4c3d8cb 100644 --- a/sound/usb/line6/pod.c +++ b/sound/usb/line6/pod.c @@ -574,7 +574,7 @@ static const struct line6_properties pod_properties_table[] = { static int pod_probe(struct usb_interface *interface, const struct usb_device_id *id) { - return line6_probe(interface, id, + return line6_probe(interface, id, "Line 6 POD", &pod_properties_table[id->driver_info], pod_init, sizeof(struct usb_line6_pod)); } diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index 9c3c744..f0a761b 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -169,7 +169,7 @@ static const struct line6_properties podhd_properties_table[] = { static int podhd_probe(struct usb_interface *interface, const struct usb_device_id *id) { - return line6_probe(interface, id, + return line6_probe(interface, id, "Line 6 PODHD", &podhd_properties_table[id->driver_info], podhd_init, sizeof(struct usb_line6)); } diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index b2c0b2c..53c0fbd 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -557,7 +557,7 @@ static const struct line6_properties toneport_properties_table[] = { static int toneport_probe(struct usb_interface *interface, const struct usb_device_id *id) { - return line6_probe(interface, id, + return line6_probe(interface, id, "Line 6 TonePort", &toneport_properties_table[id->driver_info], toneport_init, sizeof(struct usb_line6_toneport)); } diff --git a/sound/usb/line6/variax.c b/sound/usb/line6/variax.c index b1c1de6..6f35c96 100644 --- a/sound/usb/line6/variax.c +++ b/sound/usb/line6/variax.c @@ -283,7 +283,7 @@ static const struct line6_properties variax_properties_table[] = { static int variax_probe(struct usb_interface *interface, const struct usb_device_id *id) { - return line6_probe(interface, id, + return line6_probe(interface, id, "Line 6 Variax", &variax_properties_table[id->driver_info], variax_init, sizeof(struct usb_line6_variax)); }
At Fri, 6 Feb 2015 08:51:11 -0600, Chris Rorvick wrote:
Provide a descriptive name for each driver instead of calling all of them "line6usb".
This needs to be done carefully. This string is referred in alsa-lib to pick up the the configuration file. So, this change shall break the compatibility.
If we ever want to pick up a different alsa-lib configuration depending on each line6 driver type, then yes, we should give the individual driver name. If we want to keep rather the common configuration file (so far there is none, but if any in furture), then we should keep the common driver name.
And, the decision must be done now. From now on, basically we are not allowed to break the user-space compatibility. That is, this is the very last chance to do it.
If your patch is supposed to do it with these consideration, I'm willing to take. But, I guess it's not, because you chose the string like "Line 6 POD". This is usually not ideal as a driver name; think of $DRIVER.conf file that is used for alsa-lib configuration.
So, from that POV, "line6usb" is no bad name string. If we want differentiate per driver, a name like "Line6-Pod" or just "Pod" would be more appropriate.
Takashi
Signed-off-by: Chris Rorvick chris@rorvick.com
sound/usb/line6/driver.c | 3 ++- sound/usb/line6/driver.h | 3 +-- sound/usb/line6/pod.c | 2 +- sound/usb/line6/podhd.c | 2 +- sound/usb/line6/toneport.c | 2 +- sound/usb/line6/variax.c | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index e2a2603..626b0c3 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -480,6 +480,7 @@ static int line6_init_cap_control(struct usb_line6 *line6) */ int line6_probe(struct usb_interface *interface, const struct usb_device_id *id,
const char *driver_name,@@ -511,7 +512,7 @@ int line6_probe(struct usb_interface *interface, line6->ifcdev = &interface->dev;
strcpy(card->id, properties->id);
- strcpy(card->driver, DRIVER_NAME);
- strcpy(card->driver, driver_name); strcpy(card->shortname, properties->name); sprintf(card->longname, "Line 6 %s at USB %s", properties->name, dev_name(line6->ifcdev));
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h index 2276b78..92a662a 100644 --- a/sound/usb/line6/driver.h +++ b/sound/usb/line6/driver.h @@ -18,8 +18,6 @@
#include "midi.h"
-#define DRIVER_NAME "line6usb"
#define USB_INTERVALS_PER_SECOND 1000
/* Fallback USB interval and max packet size values */ @@ -168,6 +166,7 @@ extern int line6_write_data(struct usb_line6 *line6, int address, void *data,
int line6_probe(struct usb_interface *interface, const struct usb_device_id *id,
const char *driver_name,diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c index 61aadd7..4c3d8cb 100644 --- a/sound/usb/line6/pod.c +++ b/sound/usb/line6/pod.c @@ -574,7 +574,7 @@ static const struct line6_properties pod_properties_table[] = { static int pod_probe(struct usb_interface *interface, const struct usb_device_id *id) {
- return line6_probe(interface, id,
- return line6_probe(interface, id, "Line 6 POD", &pod_properties_table[id->driver_info], pod_init, sizeof(struct usb_line6_pod));
} diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index 9c3c744..f0a761b 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -169,7 +169,7 @@ static const struct line6_properties podhd_properties_table[] = { static int podhd_probe(struct usb_interface *interface, const struct usb_device_id *id) {
- return line6_probe(interface, id,
- return line6_probe(interface, id, "Line 6 PODHD", &podhd_properties_table[id->driver_info], podhd_init, sizeof(struct usb_line6));
} diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index b2c0b2c..53c0fbd 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -557,7 +557,7 @@ static const struct line6_properties toneport_properties_table[] = { static int toneport_probe(struct usb_interface *interface, const struct usb_device_id *id) {
- return line6_probe(interface, id,
- return line6_probe(interface, id, "Line 6 TonePort", &toneport_properties_table[id->driver_info], toneport_init, sizeof(struct usb_line6_toneport));
} diff --git a/sound/usb/line6/variax.c b/sound/usb/line6/variax.c index b1c1de6..6f35c96 100644 --- a/sound/usb/line6/variax.c +++ b/sound/usb/line6/variax.c @@ -283,7 +283,7 @@ static const struct line6_properties variax_properties_table[] = { static int variax_probe(struct usb_interface *interface, const struct usb_device_id *id) {
- return line6_probe(interface, id,
- return line6_probe(interface, id, "Line 6 Variax", &variax_properties_table[id->driver_info], variax_init, sizeof(struct usb_line6_variax));
}
2.1.0
At Fri, 06 Feb 2015 16:04:42 +0100, Takashi Iwai wrote:
At Fri, 6 Feb 2015 08:51:11 -0600, Chris Rorvick wrote:
Provide a descriptive name for each driver instead of calling all of them "line6usb".
This needs to be done carefully. This string is referred in alsa-lib to pick up the the configuration file. So, this change shall break the compatibility.
If we ever want to pick up a different alsa-lib configuration depending on each line6 driver type, then yes, we should give the individual driver name. If we want to keep rather the common configuration file (so far there is none, but if any in furture), then we should keep the common driver name.
And, the decision must be done now. From now on, basically we are not allowed to break the user-space compatibility. That is, this is the very last chance to do it.
If your patch is supposed to do it with these consideration, I'm willing to take. But, I guess it's not, because you chose the string like "Line 6 POD". This is usually not ideal as a driver name; think of $DRIVER.conf file that is used for alsa-lib configuration.
So, from that POV, "line6usb" is no bad name string. If we want differentiate per driver, a name like "Line6-Pod" or just "Pod" would be more appropriate.
Just to make sure: I'm not against giving own driver name for each line6 driver. I myself think it'd be rather better than the single common name for long term. But, the name string should be more usable as a file name, i.e. without space and just two words or so.
Takashi
On Fri, Feb 6, 2015 at 11:23 AM, Takashi Iwai tiwai@suse.de wrote:
At Fri, 06 Feb 2015 16:04:42 +0100, Takashi Iwai wrote:
At Fri, 6 Feb 2015 08:51:11 -0600, Chris Rorvick wrote:
Provide a descriptive name for each driver instead of calling all of them "line6usb".
This needs to be done carefully. This string is referred in alsa-lib to pick up the the configuration file. So, this change shall break the compatibility.
If we ever want to pick up a different alsa-lib configuration depending on each line6 driver type, then yes, we should give the individual driver name. If we want to keep rather the common configuration file (so far there is none, but if any in furture), then we should keep the common driver name.
And, the decision must be done now. From now on, basically we are not allowed to break the user-space compatibility. That is, this is the very last chance to do it.
If your patch is supposed to do it with these consideration, I'm willing to take. But, I guess it's not, because you chose the string like "Line 6 POD". This is usually not ideal as a driver name; think of $DRIVER.conf file that is used for alsa-lib configuration.
So, from that POV, "line6usb" is no bad name string. If we want differentiate per driver, a name like "Line6-Pod" or just "Pod" would be more appropriate.
Just to make sure: I'm not against giving own driver name for each line6 driver. I myself think it'd be rather better than the single common name for long term. But, the name string should be more usable as a file name, i.e. without space and just two words or so.
OK, thanks for clarifying. I did not realize this was used to look for a config file name. I will resubmit using the /Line6-\w+/ convention.
Regards,
Chris
It is just noise that makes lines longer.
Signed-off-by: Chris Rorvick chris@rorvick.com --- sound/usb/line6/capture.c | 2 +- sound/usb/line6/driver.c | 42 +++++++++++++++++++------------------- sound/usb/line6/driver.h | 22 ++++++++++---------- sound/usb/line6/midi.c | 24 ++++++++++------------ sound/usb/line6/midi.h | 6 +++--- sound/usb/line6/pcm.c | 5 ++--- sound/usb/line6/pcm.h | 4 ++-- sound/usb/line6/playback.c | 2 +- sound/usb/line6/pod.c | 50 ++++++++++++++++++++++------------------------ sound/usb/line6/podhd.c | 5 ++--- sound/usb/line6/toneport.c | 45 ++++++++++++++++++++--------------------- sound/usb/line6/variax.c | 39 ++++++++++++++++++------------------ 12 files changed, 118 insertions(+), 128 deletions(-)
diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c index f518fbb..fb23336 100644 --- a/sound/usb/line6/capture.c +++ b/sound/usb/line6/capture.c @@ -244,7 +244,7 @@ struct snd_pcm_ops snd_line6_capture_ops = {
int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm) { - struct usb_line6 *line6 = line6pcm->line6; + struct line6 *line6 = line6pcm->line6; int i;
/* create audio URBs and fill in constant values: */ diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index 626b0c3..f10cb63 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -46,7 +46,7 @@ static const char line6_request_version[] = { Class for asynchronous messages. */ struct message { - struct usb_line6 *line6; + struct line6 *line6; const char *buffer; int size; int done; @@ -62,7 +62,7 @@ static int line6_send_raw_message_async_part(struct message *msg, /* Start to listen on endpoint. */ -static int line6_start_listen(struct usb_line6 *line6) +static int line6_start_listen(struct line6 *line6) { int err;
@@ -78,7 +78,7 @@ static int line6_start_listen(struct usb_line6 *line6) /* Stop listening on endpoint. */ -static void line6_stop_listen(struct usb_line6 *line6) +static void line6_stop_listen(struct line6 *line6) { usb_kill_urb(line6->urb_listen); } @@ -86,7 +86,7 @@ static void line6_stop_listen(struct usb_line6 *line6) /* Send raw message in pieces of wMaxPacketSize bytes. */ -static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, +static int line6_send_raw_message(struct line6 *line6, const char *buffer, int size) { int i, done = 0; @@ -136,7 +136,7 @@ static int line6_send_raw_message_async_part(struct message *msg, struct urb *urb) { int retval; - struct usb_line6 *line6 = msg->line6; + struct line6 *line6 = msg->line6; int done = msg->done; int bytes = min(msg->size - done, line6->max_packet_size);
@@ -173,7 +173,7 @@ EXPORT_SYMBOL_GPL(line6_start_timer); /* Asynchronously send raw message. */ -int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, +int line6_send_raw_message_async(struct line6 *line6, const char *buffer, int size) { struct message *msg; @@ -206,7 +206,7 @@ EXPORT_SYMBOL_GPL(line6_send_raw_message_async); /* Send asynchronous device version request. */ -int line6_version_request_async(struct usb_line6 *line6) +int line6_version_request_async(struct line6 *line6) { char *buffer; int retval; @@ -226,7 +226,7 @@ EXPORT_SYMBOL_GPL(line6_version_request_async); /* Send sysex message in pieces of wMaxPacketSize bytes. */ -int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer, +int line6_send_sysex_message(struct line6 *line6, const char *buffer, int size) { return line6_send_raw_message(line6, buffer, @@ -240,7 +240,7 @@ EXPORT_SYMBOL_GPL(line6_send_sysex_message); @param code sysex message code @param size number of bytes between code and sysex end */ -char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2, +char *line6_alloc_sysex_buffer(struct line6 *line6, int code1, int code2, int size) { char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_ATOMIC); @@ -262,7 +262,7 @@ EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer); */ static void line6_data_received(struct urb *urb) { - struct usb_line6 *line6 = (struct usb_line6 *)urb->context; + struct line6 *line6 = (struct line6 *) urb->context; struct midi_buffer *mb = &line6->line6midi->midibuf_in; int done;
@@ -299,7 +299,7 @@ static void line6_data_received(struct urb *urb) /* Read data from device. */ -int line6_read_data(struct usb_line6 *line6, int address, void *data, +int line6_read_data(struct line6 *line6, int address, void *data, size_t datalen) { struct usb_device *usbdev = line6->usbdev; @@ -357,7 +357,7 @@ EXPORT_SYMBOL_GPL(line6_read_data); /* Write data to device. */ -int line6_write_data(struct usb_line6 *line6, int address, void *data, +int line6_write_data(struct line6 *line6, int address, void *data, size_t datalen) { struct usb_device *usbdev = line6->usbdev; @@ -403,7 +403,7 @@ EXPORT_SYMBOL_GPL(line6_write_data); Read Line 6 device serial number. (POD, TonePort, GuitarPort) */ -int line6_read_serial_number(struct usb_line6 *line6, int *serial_number) +int line6_read_serial_number(struct line6 *line6, int *serial_number) { return line6_read_data(line6, 0x80d0, serial_number, sizeof(*serial_number)); @@ -415,7 +415,7 @@ EXPORT_SYMBOL_GPL(line6_read_serial_number); */ static void line6_destruct(struct snd_card *card) { - struct usb_line6 *line6 = card->private_data; + struct line6 *line6 = card->private_data; struct usb_device *usbdev = line6->usbdev;
/* free buffer memory first: */ @@ -430,7 +430,7 @@ static void line6_destruct(struct snd_card *card) }
/* get data from endpoint descriptor (see usb_maxpacket): */ -static void line6_get_interval(struct usb_line6 *line6) +static void line6_get_interval(struct line6 *line6) { struct usb_device *usbdev = line6->usbdev; struct usb_host_endpoint *ep; @@ -449,7 +449,7 @@ static void line6_get_interval(struct usb_line6 *line6) } }
-static int line6_init_cap_control(struct usb_line6 *line6) +static int line6_init_cap_control(struct line6 *line6) { int ret;
@@ -482,12 +482,12 @@ int line6_probe(struct usb_interface *interface, const struct usb_device_id *id, const char *driver_name, const struct line6_properties *properties, - int (*private_init)(struct usb_line6 *, const struct usb_device_id *id), + int (*private_init)(struct line6 *, const struct usb_device_id *id), size_t data_size) { struct usb_device *usbdev = interface_to_usbdev(interface); struct snd_card *card; - struct usb_line6 *line6; + struct line6 *line6; int interface_number; int ret;
@@ -569,7 +569,7 @@ EXPORT_SYMBOL_GPL(line6_probe); */ void line6_disconnect(struct usb_interface *interface) { - struct usb_line6 *line6 = usb_get_intfdata(interface); + struct line6 *line6 = usb_get_intfdata(interface); struct usb_device *usbdev = interface_to_usbdev(interface);
if (!line6) @@ -604,7 +604,7 @@ EXPORT_SYMBOL_GPL(line6_disconnect); */ int line6_suspend(struct usb_interface *interface, pm_message_t message) { - struct usb_line6 *line6 = usb_get_intfdata(interface); + struct line6 *line6 = usb_get_intfdata(interface); struct snd_line6_pcm *line6pcm = line6->line6pcm;
snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot); @@ -626,7 +626,7 @@ EXPORT_SYMBOL_GPL(line6_suspend); */ int line6_resume(struct usb_interface *interface) { - struct usb_line6 *line6 = usb_get_intfdata(interface); + struct line6 *line6 = usb_get_intfdata(interface);
if (line6->properties->capabilities & LINE6_CAP_CONTROL) line6_start_listen(line6); diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h index 92a662a..13cd223 100644 --- a/sound/usb/line6/driver.h +++ b/sound/usb/line6/driver.h @@ -102,7 +102,7 @@ enum { Common data shared by all Line 6 devices. Corresponds to a pair of USB endpoints. */ -struct usb_line6 { +struct line6 { /* USB device */ struct usb_device *usbdev;
@@ -141,34 +141,34 @@ struct usb_line6 { /* Length of message to be processed */ int message_length;
- void (*process_message)(struct usb_line6 *); - void (*disconnect)(struct usb_line6 *line6); + void (*process_message)(struct line6 *); + void (*disconnect)(struct line6 *line6); };
-extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, +extern char *line6_alloc_sysex_buffer(struct line6 *line6, int code1, int code2, int size); -extern int line6_read_data(struct usb_line6 *line6, int address, void *data, +extern int line6_read_data(struct line6 *line6, int address, void *data, size_t datalen); -extern int line6_read_serial_number(struct usb_line6 *line6, +extern int line6_read_serial_number(struct line6 *line6, int *serial_number); -extern int line6_send_raw_message_async(struct usb_line6 *line6, +extern int line6_send_raw_message_async(struct line6 *line6, const char *buffer, int size); -extern int line6_send_sysex_message(struct usb_line6 *line6, +extern int line6_send_sysex_message(struct line6 *line6, const char *buffer, int size); extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); extern void line6_start_timer(struct timer_list *timer, unsigned long msecs, void (*function)(unsigned long), unsigned long data); -extern int line6_version_request_async(struct usb_line6 *line6); -extern int line6_write_data(struct usb_line6 *line6, int address, void *data, +extern int line6_version_request_async(struct line6 *line6); +extern int line6_write_data(struct line6 *line6, int address, void *data, size_t datalen);
int line6_probe(struct usb_interface *interface, const struct usb_device_id *id, const char *driver_name, const struct line6_properties *properties, - int (*private_init)(struct usb_line6 *, const struct usb_device_id *id), + int (*private_init)(struct line6 *, const struct usb_device_id *id), size_t data_size);
void line6_disconnect(struct usb_interface *interface); diff --git a/sound/usb/line6/midi.c b/sound/usb/line6/midi.c index cebea9b..0ad2e19 100644 --- a/sound/usb/line6/midi.c +++ b/sound/usb/line6/midi.c @@ -21,13 +21,13 @@ #define line6_rawmidi_substream_midi(substream) \ ((struct snd_line6_midi *)((substream)->rmidi->private_data))
-static int send_midi_async(struct usb_line6 *line6, unsigned char *data, +static int send_midi_async(struct line6 *line6, unsigned char *data, int length);
/* Pass data received via USB to MIDI. */ -void line6_midi_receive(struct usb_line6 *line6, unsigned char *data, +void line6_midi_receive(struct line6 *line6, unsigned char *data, int length) { if (line6->line6midi->substream_receive) @@ -40,8 +40,7 @@ void line6_midi_receive(struct usb_line6 *line6, unsigned char *data, */ static void line6_midi_transmit(struct snd_rawmidi_substream *substream) { - struct usb_line6 *line6 = - line6_rawmidi_substream_midi(substream)->line6; + struct line6 *line6 = line6_rawmidi_substream_midi(substream)->line6; struct snd_line6_midi *line6midi = line6->line6midi; struct midi_buffer *mb = &line6midi->midibuf_out; unsigned char chunk[LINE6_FALLBACK_MAXPACKETSIZE]; @@ -77,7 +76,7 @@ static void midi_sent(struct urb *urb) unsigned long flags; int status; int num; - struct usb_line6 *line6 = (struct usb_line6 *)urb->context; + struct line6 *line6 = (struct line6 *) urb->context;
status = urb->status; kfree(urb->transfer_buffer); @@ -105,7 +104,7 @@ static void midi_sent(struct urb *urb) Assumes that line6->line6midi->lock is held (i.e., this function is serialized). */ -static int send_midi_async(struct usb_line6 *line6, unsigned char *data, +static int send_midi_async(struct line6 *line6, unsigned char *data, int length) { struct urb *urb; @@ -156,8 +155,7 @@ static void line6_midi_output_trigger(struct snd_rawmidi_substream *substream, int up) { unsigned long flags; - struct usb_line6 *line6 = - line6_rawmidi_substream_midi(substream)->line6; + struct line6 *line6 = line6_rawmidi_substream_midi(substream)->line6;
line6->line6midi->substream_transmit = substream; spin_lock_irqsave(&line6->line6midi->lock, flags); @@ -170,8 +168,7 @@ static void line6_midi_output_trigger(struct snd_rawmidi_substream *substream,
static void line6_midi_output_drain(struct snd_rawmidi_substream *substream) { - struct usb_line6 *line6 = - line6_rawmidi_substream_midi(substream)->line6; + struct line6 *line6 = line6_rawmidi_substream_midi(substream)->line6; struct snd_line6_midi *midi = line6->line6midi;
wait_event_interruptible(midi->send_wait, @@ -191,8 +188,7 @@ static int line6_midi_input_close(struct snd_rawmidi_substream *substream) static void line6_midi_input_trigger(struct snd_rawmidi_substream *substream, int up) { - struct usb_line6 *line6 = - line6_rawmidi_substream_midi(substream)->line6; + struct line6 *line6 = line6_rawmidi_substream_midi(substream)->line6;
if (up) line6->line6midi->substream_receive = substream; @@ -214,7 +210,7 @@ static struct snd_rawmidi_ops line6_midi_input_ops = { };
/* Create a MIDI device */ -static int snd_line6_new_midi(struct usb_line6 *line6, +static int snd_line6_new_midi(struct line6 *line6, struct snd_rawmidi **rmidi_ret) { struct snd_rawmidi *rmidi; @@ -252,7 +248,7 @@ static void snd_line6_midi_free(struct snd_rawmidi *rmidi) /* Initialize the Line 6 MIDI subsystem. */ -int line6_init_midi(struct usb_line6 *line6) +int line6_init_midi(struct line6 *line6) { int err; struct snd_rawmidi *rmidi; diff --git a/sound/usb/line6/midi.h b/sound/usb/line6/midi.h index cf82d69..2ca22b9 100644 --- a/sound/usb/line6/midi.h +++ b/sound/usb/line6/midi.h @@ -20,7 +20,7 @@
struct snd_line6_midi { /* Pointer back to the Line 6 driver data structure */ - struct usb_line6 *line6; + struct line6 *line6;
/* MIDI substream for receiving (or NULL if not active) */ struct snd_rawmidi_substream *substream_receive; @@ -44,8 +44,8 @@ struct snd_line6_midi { struct midi_buffer midibuf_out; };
-extern int line6_init_midi(struct usb_line6 *line6); -extern void line6_midi_receive(struct usb_line6 *line6, unsigned char *data, +extern int line6_init_midi(struct line6 *line6); +extern void line6_midi_receive(struct line6 *line6, unsigned char *data, int length);
#endif diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c index 8461d6b..cd248f4 100644 --- a/sound/usb/line6/pcm.c +++ b/sound/usb/line6/pcm.c @@ -460,7 +460,7 @@ static void line6_cleanup_pcm(struct snd_pcm *pcm) }
/* create a PCM device */ -static int snd_line6_new_pcm(struct usb_line6 *line6, struct snd_pcm **pcm_ret) +static int snd_line6_new_pcm(struct line6 *line6, struct snd_pcm **pcm_ret) { struct snd_pcm *pcm; int err; @@ -500,8 +500,7 @@ void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm) Create and register the PCM device and mixer entries. Create URBs for playback and capture. */ -int line6_init_pcm(struct usb_line6 *line6, - struct line6_pcm_properties *properties) +int line6_init_pcm(struct line6 *line6, struct line6_pcm_properties *properties) { int i, err; unsigned ep_read = line6->properties->ep_audio_r; diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h index 508410a..d2d1acb 100644 --- a/sound/usb/line6/pcm.h +++ b/sound/usb/line6/pcm.h @@ -139,7 +139,7 @@ struct line6_pcm_stream {
struct snd_line6_pcm { /* Pointer back to the Line 6 driver data structure */ - struct usb_line6 *line6; + struct line6 *line6;
/* Properties. */ struct line6_pcm_properties *properties; @@ -182,7 +182,7 @@ struct snd_line6_pcm { unsigned long flags; };
-extern int line6_init_pcm(struct usb_line6 *line6, +extern int line6_init_pcm(struct line6 *line6, struct line6_pcm_properties *properties); extern int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd); extern int snd_line6_prepare(struct snd_pcm_substream *substream); diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c index 05dee69..72debac 100644 --- a/sound/usb/line6/playback.c +++ b/sound/usb/line6/playback.c @@ -398,7 +398,7 @@ struct snd_pcm_ops snd_line6_playback_ops = {
int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm) { - struct usb_line6 *line6 = line6pcm->line6; + struct line6 *line6 = line6pcm->line6; int i;
/* create audio URBs and fill in constant values: */ diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c index 4c3d8cb..d109a72 100644 --- a/sound/usb/line6/pod.c +++ b/sound/usb/line6/pod.c @@ -56,9 +56,9 @@ enum { LINE6_PODXTPRO, };
-struct usb_line6_pod { +struct line6_pod { /* Generic Line 6 USB data */ - struct usb_line6 line6; + struct line6 line6;
/* Instrument monitor level */ int monitor_level; @@ -176,9 +176,9 @@ static const char pod_version_header[] = {
/* forward declarations: */ static void pod_startup2(unsigned long data); -static void pod_startup3(struct usb_line6_pod *pod); +static void pod_startup3(struct line6_pod *pod);
-static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, +static char *pod_alloc_sysex_buffer(struct line6_pod *pod, int code, int size) { return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code, @@ -188,9 +188,9 @@ static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, /* Process a completely received message. */ -static void line6_pod_process_message(struct usb_line6 *line6) +static void line6_pod_process_message(struct line6 *line6) { - struct usb_line6_pod *pod = (struct usb_line6_pod *) line6; + struct line6_pod *pod = (struct line6_pod *) line6; const unsigned char *buf = pod->line6.buffer_message;
if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) { @@ -219,8 +219,7 @@ static void line6_pod_process_message(struct usb_line6 *line6) /* Send system parameter (from integer). */ -static int pod_set_system_param_int(struct usb_line6_pod *pod, int value, - int code) +static int pod_set_system_param_int(struct line6_pod *pod, int value, int code) { char *sysex; static const int size = 5; @@ -245,7 +244,7 @@ static ssize_t serial_number_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_interface *interface = to_usb_interface(dev); - struct usb_line6_pod *pod = usb_get_intfdata(interface); + struct line6_pod *pod = usb_get_intfdata(interface);
return sprintf(buf, "%d\n", pod->serial_number); } @@ -257,7 +256,7 @@ static ssize_t firmware_version_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_interface *interface = to_usb_interface(dev); - struct usb_line6_pod *pod = usb_get_intfdata(interface); + struct line6_pod *pod = usb_get_intfdata(interface);
return sprintf(buf, "%d.%02d\n", pod->firmware_version / 100, pod->firmware_version % 100); @@ -270,7 +269,7 @@ static ssize_t device_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_interface *interface = to_usb_interface(dev); - struct usb_line6_pod *pod = usb_get_intfdata(interface); + struct line6_pod *pod = usb_get_intfdata(interface);
return sprintf(buf, "%d\n", pod->device_id); } @@ -282,7 +281,7 @@ static ssize_t device_id_show(struct device *dev, context). After the last one has finished, the device is ready to use. */
-static void pod_startup1(struct usb_line6_pod *pod) +static void pod_startup1(struct line6_pod *pod) { CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_INIT);
@@ -293,8 +292,8 @@ static void pod_startup1(struct usb_line6_pod *pod)
static void pod_startup2(unsigned long data) { - struct usb_line6_pod *pod = (struct usb_line6_pod *)data; - struct usb_line6 *line6 = &pod->line6; + struct line6_pod *pod = (struct line6_pod *) data; + struct line6 *line6 = &pod->line6;
CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ);
@@ -302,7 +301,7 @@ static void pod_startup2(unsigned long data) line6_version_request_async(line6); }
-static void pod_startup3(struct usb_line6_pod *pod) +static void pod_startup3(struct line6_pod *pod) { CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_WORKQUEUE);
@@ -312,9 +311,9 @@ static void pod_startup3(struct usb_line6_pod *pod)
static void pod_startup4(struct work_struct *work) { - struct usb_line6_pod *pod = - container_of(work, struct usb_line6_pod, startup_work); - struct usb_line6 *line6 = &pod->line6; + struct line6_pod *pod = container_of(work, struct line6_pod, + startup_work); + struct line6 *line6 = &pod->line6;
CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_SETUP);
@@ -346,7 +345,7 @@ static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); - struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6; + struct line6_pod *pod = (struct line6_pod *) line6pcm->line6;
ucontrol->value.integer.value[0] = pod->monitor_level; return 0; @@ -357,7 +356,7 @@ static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); - struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6; + struct line6_pod *pod = (struct line6_pod *) line6pcm->line6;
if (ucontrol->value.integer.value[0] == pod->monitor_level) return 0; @@ -382,9 +381,9 @@ static struct snd_kcontrol_new pod_control_monitor = { /* POD device disconnected. */ -static void line6_pod_disconnect(struct usb_line6 *line6) +static void line6_pod_disconnect(struct line6 *line6) { - struct usb_line6_pod *pod = (struct usb_line6_pod *)line6; + struct line6_pod *pod = (struct line6_pod *) line6; struct device *dev = line6->ifcdev;
/* remove sysfs entries: */ @@ -418,11 +417,10 @@ static int pod_create_files2(struct device *dev) /* Try to init POD device. */ -static int pod_init(struct usb_line6 *line6, - const struct usb_device_id *id) +static int pod_init(struct line6 *line6, const struct usb_device_id *id) { int err; - struct usb_line6_pod *pod = (struct usb_line6_pod *) line6; + struct line6_pod *pod = (struct line6_pod *) line6;
line6->process_message = line6_pod_process_message; line6->disconnect = line6_pod_disconnect; @@ -576,7 +574,7 @@ static int pod_probe(struct usb_interface *interface, { return line6_probe(interface, id, "Line 6 POD", &pod_properties_table[id->driver_info], - pod_init, sizeof(struct usb_line6_pod)); + pod_init, sizeof(struct line6_pod)); }
static struct usb_driver pod_driver = { diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index f0a761b..d4399e7 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -79,8 +79,7 @@ static struct line6_pcm_properties podhd_pcm_properties = { /* Try to init POD HD device. */ -static int podhd_init(struct usb_line6 *line6, - const struct usb_device_id *id) +static int podhd_init(struct line6 *line6, const struct usb_device_id *id) { int err;
@@ -171,7 +170,7 @@ static int podhd_probe(struct usb_interface *interface, { return line6_probe(interface, id, "Line 6 PODHD", &podhd_properties_table[id->driver_info], - podhd_init, sizeof(struct usb_line6)); + podhd_init, sizeof(struct line6)); }
static struct usb_driver podhd_driver = { diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index 53c0fbd..b5fe92f 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -32,18 +32,18 @@ enum line6_device_type { LINE6_TONEPORT_UX2, };
-struct usb_line6_toneport; +struct line6_toneport;
struct toneport_led { struct led_classdev dev; char name[64]; - struct usb_line6_toneport *toneport; + struct line6_toneport *toneport; bool registered; };
-struct usb_line6_toneport { +struct line6_toneport { /* Generic Line 6 USB data */ - struct usb_line6 line6; + struct line6 line6;
/* Source selector */ int source; @@ -214,8 +214,8 @@ static int snd_toneport_source_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); - struct usb_line6_toneport *toneport = - (struct usb_line6_toneport *)line6pcm->line6; + struct line6_toneport *toneport = + (struct line6_toneport *) line6pcm->line6; ucontrol->value.enumerated.item[0] = toneport->source; return 0; } @@ -225,8 +225,8 @@ static int snd_toneport_source_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); - struct usb_line6_toneport *toneport = - (struct usb_line6_toneport *)line6pcm->line6; + struct line6_toneport *toneport = + (struct line6_toneport *) line6pcm->line6; unsigned int source;
source = ucontrol->value.enumerated.item[0]; @@ -243,8 +243,8 @@ static int snd_toneport_source_put(struct snd_kcontrol *kcontrol,
static void toneport_start_pcm(unsigned long arg) { - struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)arg; - struct usb_line6 *line6 = &toneport->line6; + struct line6_toneport *toneport = (struct line6_toneport *) arg; + struct line6 *line6 = &toneport->line6;
line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR); } @@ -278,7 +278,7 @@ static struct snd_kcontrol_new toneport_control_source = { (void cmd_0x02(byte red, byte green) */
-static bool toneport_has_led(struct usb_line6_toneport *toneport) +static bool toneport_has_led(struct line6_toneport *toneport) { switch (toneport->type) { case LINE6_GUITARPORT: @@ -294,7 +294,7 @@ static bool toneport_has_led(struct usb_line6_toneport *toneport) static const char * const led_colors[2] = { "red", "green" }; static const int led_init_vals[2] = { 0x00, 0x26 };
-static void toneport_update_led(struct usb_line6_toneport *toneport) +static void toneport_update_led(struct line6_toneport *toneport) { toneport_send_cmd(toneport->line6.usbdev, (toneport->leds[0].dev.brightness << 8) | 0x0002, @@ -309,7 +309,7 @@ static void toneport_led_brightness_set(struct led_classdev *led_cdev, toneport_update_led(leds->toneport); }
-static int toneport_init_leds(struct usb_line6_toneport *toneport) +static int toneport_init_leds(struct line6_toneport *toneport) { struct device *dev = &toneport->line6.usbdev->dev; int i, err; @@ -334,7 +334,7 @@ static int toneport_init_leds(struct usb_line6_toneport *toneport) return 0; }
-static void toneport_remove_leds(struct usb_line6_toneport *toneport) +static void toneport_remove_leds(struct line6_toneport *toneport) { struct toneport_led *led; int i; @@ -348,7 +348,7 @@ static void toneport_remove_leds(struct usb_line6_toneport *toneport) } }
-static bool toneport_has_source_select(struct usb_line6_toneport *toneport) +static bool toneport_has_source_select(struct line6_toneport *toneport) { switch (toneport->type) { case LINE6_TONEPORT_UX1: @@ -365,10 +365,10 @@ static bool toneport_has_source_select(struct usb_line6_toneport *toneport) /* Setup Toneport device. */ -static void toneport_setup(struct usb_line6_toneport *toneport) +static void toneport_setup(struct line6_toneport *toneport) { int ticks; - struct usb_line6 *line6 = &toneport->line6; + struct line6 *line6 = &toneport->line6; struct usb_device *usbdev = line6->usbdev;
/* sync time on device with host: */ @@ -393,10 +393,9 @@ static void toneport_setup(struct usb_line6_toneport *toneport) /* Toneport device disconnected. */ -static void line6_toneport_disconnect(struct usb_line6 *line6) +static void line6_toneport_disconnect(struct line6 *line6) { - struct usb_line6_toneport *toneport = - (struct usb_line6_toneport *)line6; + struct line6_toneport *toneport = (struct line6_toneport *) line6;
del_timer_sync(&toneport->timer);
@@ -408,11 +407,11 @@ static void line6_toneport_disconnect(struct usb_line6 *line6) /* Try to init Toneport device. */ -static int toneport_init(struct usb_line6 *line6, +static int toneport_init(struct line6 *line6, const struct usb_device_id *id) { int err; - struct usb_line6_toneport *toneport = (struct usb_line6_toneport *) line6; + struct line6_toneport *toneport = (struct line6_toneport *) line6;
toneport->type = id->driver_info; setup_timer(&toneport->timer, toneport_start_pcm, @@ -559,7 +558,7 @@ static int toneport_probe(struct usb_interface *interface, { return line6_probe(interface, id, "Line 6 TonePort", &toneport_properties_table[id->driver_info], - toneport_init, sizeof(struct usb_line6_toneport)); + toneport_init, sizeof(struct line6_toneport)); }
static struct usb_driver toneport_driver = { diff --git a/sound/usb/line6/variax.c b/sound/usb/line6/variax.c index 6f35c96..fc7438a 100644 --- a/sound/usb/line6/variax.c +++ b/sound/usb/line6/variax.c @@ -40,9 +40,9 @@ enum { LINE6_VARIAX };
-struct usb_line6_variax { +struct line6_variax { /* Generic Line 6 USB data */ - struct usb_line6 line6; + struct line6 line6;
/* Buffer for activation code */ unsigned char *buffer_activate; @@ -86,7 +86,7 @@ static void variax_startup2(unsigned long data); static void variax_startup4(unsigned long data); static void variax_startup5(unsigned long data);
-static void variax_activate_async(struct usb_line6_variax *variax, int a) +static void variax_activate_async(struct line6_variax *variax, int a) { variax->buffer_activate[VARIAX_OFFSET_ACTIVATE] = a; line6_send_raw_message_async(&variax->line6, variax->buffer_activate, @@ -100,7 +100,7 @@ static void variax_activate_async(struct usb_line6_variax *variax, int a) context). After the last one has finished, the device is ready to use. */
-static void variax_startup1(struct usb_line6_variax *variax) +static void variax_startup1(struct line6_variax *variax) { CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_INIT);
@@ -111,8 +111,8 @@ static void variax_startup1(struct usb_line6_variax *variax)
static void variax_startup2(unsigned long data) { - struct usb_line6_variax *variax = (struct usb_line6_variax *)data; - struct usb_line6 *line6 = &variax->line6; + struct line6_variax *variax = (struct line6_variax *) data; + struct line6 *line6 = &variax->line6;
/* schedule another startup procedure until startup is complete: */ if (variax->startup_progress >= VARIAX_STARTUP_LAST) @@ -126,7 +126,7 @@ static void variax_startup2(unsigned long data) line6_version_request_async(line6); }
-static void variax_startup3(struct usb_line6_variax *variax) +static void variax_startup3(struct line6_variax *variax) { CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_WAIT);
@@ -137,7 +137,7 @@ static void variax_startup3(struct usb_line6_variax *variax)
static void variax_startup4(unsigned long data) { - struct usb_line6_variax *variax = (struct usb_line6_variax *)data; + struct line6_variax *variax = (struct line6_variax *) data;
CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_ACTIVATE); @@ -150,7 +150,7 @@ static void variax_startup4(unsigned long data)
static void variax_startup5(unsigned long data) { - struct usb_line6_variax *variax = (struct usb_line6_variax *)data; + struct line6_variax *variax = (struct line6_variax *) data;
CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_WORKQUEUE); @@ -161,8 +161,8 @@ static void variax_startup5(unsigned long data)
static void variax_startup6(struct work_struct *work) { - struct usb_line6_variax *variax = - container_of(work, struct usb_line6_variax, startup_work); + struct line6_variax *variax = container_of(work, struct line6_variax, + startup_work);
CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_SETUP);
@@ -173,9 +173,9 @@ static void variax_startup6(struct work_struct *work) /* Process a completely received message. */ -static void line6_variax_process_message(struct usb_line6 *line6) +static void line6_variax_process_message(struct line6 *line6) { - struct usb_line6_variax *variax = (struct usb_line6_variax *) line6; + struct line6_variax *variax = (struct line6_variax *) line6; const unsigned char *buf = variax->line6.buffer_message;
switch (buf[0]) { @@ -190,7 +190,7 @@ static void line6_variax_process_message(struct usb_line6 *line6) } else if (memcmp(buf + 1, variax_init_done + 1, sizeof(variax_init_done) - 1) == 0) { /* notify of complete initialization: */ - variax_startup4((unsigned long)variax); + variax_startup4((unsigned long) variax); } break; } @@ -199,9 +199,9 @@ static void line6_variax_process_message(struct usb_line6 *line6) /* Variax destructor. */ -static void line6_variax_disconnect(struct usb_line6 *line6) +static void line6_variax_disconnect(struct line6 *line6) { - struct usb_line6_variax *variax = (struct usb_line6_variax *)line6; + struct line6_variax *variax = (struct line6_variax *) line6;
del_timer(&variax->startup_timer1); del_timer(&variax->startup_timer2); @@ -213,10 +213,9 @@ static void line6_variax_disconnect(struct usb_line6 *line6) /* Try to init workbench device. */ -static int variax_init(struct usb_line6 *line6, - const struct usb_device_id *id) +static int variax_init(struct line6 *line6, const struct usb_device_id *id) { - struct usb_line6_variax *variax = (struct usb_line6_variax *) line6; + struct line6_variax *variax = (struct line6_variax *) line6; int err;
line6->process_message = line6_variax_process_message; @@ -285,7 +284,7 @@ static int variax_probe(struct usb_interface *interface, { return line6_probe(interface, id, "Line 6 Variax", &variax_properties_table[id->driver_info], - variax_init, sizeof(struct usb_line6_variax)); + variax_init, sizeof(struct line6_variax)); }
static struct usb_driver variax_driver = {
At Fri, 6 Feb 2015 08:51:12 -0600, Chris Rorvick wrote:
It is just noise that makes lines longer.
Signed-off-by: Chris Rorvick chris@rorvick.com
Well, this kind of renames hides the code change history, so unless there is a clear win (e.g. converting supercalifragilisticexpialidocious_ with s_), I'm not keen to do it, sorry. The current names aren't too bad from the readability POV.
Takashi
sound/usb/line6/capture.c | 2 +- sound/usb/line6/driver.c | 42 +++++++++++++++++++------------------- sound/usb/line6/driver.h | 22 ++++++++++---------- sound/usb/line6/midi.c | 24 ++++++++++------------ sound/usb/line6/midi.h | 6 +++--- sound/usb/line6/pcm.c | 5 ++--- sound/usb/line6/pcm.h | 4 ++-- sound/usb/line6/playback.c | 2 +- sound/usb/line6/pod.c | 50 ++++++++++++++++++++++------------------------ sound/usb/line6/podhd.c | 5 ++--- sound/usb/line6/toneport.c | 45 ++++++++++++++++++++--------------------- sound/usb/line6/variax.c | 39 ++++++++++++++++++------------------ 12 files changed, 118 insertions(+), 128 deletions(-)
diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c index f518fbb..fb23336 100644 --- a/sound/usb/line6/capture.c +++ b/sound/usb/line6/capture.c @@ -244,7 +244,7 @@ struct snd_pcm_ops snd_line6_capture_ops = {
int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm) {
- struct usb_line6 *line6 = line6pcm->line6;
struct line6 *line6 = line6pcm->line6; int i;
/* create audio URBs and fill in constant values: */
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index 626b0c3..f10cb63 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -46,7 +46,7 @@ static const char line6_request_version[] = { Class for asynchronous messages. */ struct message {
- struct usb_line6 *line6;
- struct line6 *line6; const char *buffer; int size; int done;
@@ -62,7 +62,7 @@ static int line6_send_raw_message_async_part(struct message *msg, /* Start to listen on endpoint. */ -static int line6_start_listen(struct usb_line6 *line6) +static int line6_start_listen(struct line6 *line6) { int err;
@@ -78,7 +78,7 @@ static int line6_start_listen(struct usb_line6 *line6) /* Stop listening on endpoint. */ -static void line6_stop_listen(struct usb_line6 *line6) +static void line6_stop_listen(struct line6 *line6) { usb_kill_urb(line6->urb_listen); } @@ -86,7 +86,7 @@ static void line6_stop_listen(struct usb_line6 *line6) /* Send raw message in pieces of wMaxPacketSize bytes. */ -static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, +static int line6_send_raw_message(struct line6 *line6, const char *buffer, int size) { int i, done = 0; @@ -136,7 +136,7 @@ static int line6_send_raw_message_async_part(struct message *msg, struct urb *urb) { int retval;
- struct usb_line6 *line6 = msg->line6;
- struct line6 *line6 = msg->line6; int done = msg->done; int bytes = min(msg->size - done, line6->max_packet_size);
@@ -173,7 +173,7 @@ EXPORT_SYMBOL_GPL(line6_start_timer); /* Asynchronously send raw message. */ -int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, +int line6_send_raw_message_async(struct line6 *line6, const char *buffer, int size) { struct message *msg; @@ -206,7 +206,7 @@ EXPORT_SYMBOL_GPL(line6_send_raw_message_async); /* Send asynchronous device version request. */ -int line6_version_request_async(struct usb_line6 *line6) +int line6_version_request_async(struct line6 *line6) { char *buffer; int retval; @@ -226,7 +226,7 @@ EXPORT_SYMBOL_GPL(line6_version_request_async); /* Send sysex message in pieces of wMaxPacketSize bytes. */ -int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer, +int line6_send_sysex_message(struct line6 *line6, const char *buffer, int size) { return line6_send_raw_message(line6, buffer, @@ -240,7 +240,7 @@ EXPORT_SYMBOL_GPL(line6_send_sysex_message); @param code sysex message code @param size number of bytes between code and sysex end */ -char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2, +char *line6_alloc_sysex_buffer(struct line6 *line6, int code1, int code2, int size) { char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_ATOMIC); @@ -262,7 +262,7 @@ EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer); */ static void line6_data_received(struct urb *urb) {
- struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
- struct line6 *line6 = (struct line6 *) urb->context; struct midi_buffer *mb = &line6->line6midi->midibuf_in; int done;
@@ -299,7 +299,7 @@ static void line6_data_received(struct urb *urb) /* Read data from device. */ -int line6_read_data(struct usb_line6 *line6, int address, void *data, +int line6_read_data(struct line6 *line6, int address, void *data, size_t datalen) { struct usb_device *usbdev = line6->usbdev; @@ -357,7 +357,7 @@ EXPORT_SYMBOL_GPL(line6_read_data); /* Write data to device. */ -int line6_write_data(struct usb_line6 *line6, int address, void *data, +int line6_write_data(struct line6 *line6, int address, void *data, size_t datalen) { struct usb_device *usbdev = line6->usbdev; @@ -403,7 +403,7 @@ EXPORT_SYMBOL_GPL(line6_write_data); Read Line 6 device serial number. (POD, TonePort, GuitarPort) */ -int line6_read_serial_number(struct usb_line6 *line6, int *serial_number) +int line6_read_serial_number(struct line6 *line6, int *serial_number) { return line6_read_data(line6, 0x80d0, serial_number, sizeof(*serial_number)); @@ -415,7 +415,7 @@ EXPORT_SYMBOL_GPL(line6_read_serial_number); */ static void line6_destruct(struct snd_card *card) {
- struct usb_line6 *line6 = card->private_data;
struct line6 *line6 = card->private_data; struct usb_device *usbdev = line6->usbdev;
/* free buffer memory first: */
@@ -430,7 +430,7 @@ static void line6_destruct(struct snd_card *card) }
/* get data from endpoint descriptor (see usb_maxpacket): */ -static void line6_get_interval(struct usb_line6 *line6) +static void line6_get_interval(struct line6 *line6) { struct usb_device *usbdev = line6->usbdev; struct usb_host_endpoint *ep; @@ -449,7 +449,7 @@ static void line6_get_interval(struct usb_line6 *line6) } }
-static int line6_init_cap_control(struct usb_line6 *line6) +static int line6_init_cap_control(struct line6 *line6) { int ret;
@@ -482,12 +482,12 @@ int line6_probe(struct usb_interface *interface, const struct usb_device_id *id, const char *driver_name, const struct line6_properties *properties,
int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
int (*private_init)(struct line6 *, const struct usb_device_id *id),{ struct usb_device *usbdev = interface_to_usbdev(interface); struct snd_card *card;
- struct usb_line6 *line6;
- struct line6 *line6; int interface_number; int ret;
@@ -569,7 +569,7 @@ EXPORT_SYMBOL_GPL(line6_probe); */ void line6_disconnect(struct usb_interface *interface) {
- struct usb_line6 *line6 = usb_get_intfdata(interface);
struct line6 *line6 = usb_get_intfdata(interface); struct usb_device *usbdev = interface_to_usbdev(interface);
if (!line6)
@@ -604,7 +604,7 @@ EXPORT_SYMBOL_GPL(line6_disconnect); */ int line6_suspend(struct usb_interface *interface, pm_message_t message) {
- struct usb_line6 *line6 = usb_get_intfdata(interface);
struct line6 *line6 = usb_get_intfdata(interface); struct snd_line6_pcm *line6pcm = line6->line6pcm;
snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);
@@ -626,7 +626,7 @@ EXPORT_SYMBOL_GPL(line6_suspend); */ int line6_resume(struct usb_interface *interface) {
- struct usb_line6 *line6 = usb_get_intfdata(interface);
struct line6 *line6 = usb_get_intfdata(interface);
if (line6->properties->capabilities & LINE6_CAP_CONTROL) line6_start_listen(line6);
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h index 92a662a..13cd223 100644 --- a/sound/usb/line6/driver.h +++ b/sound/usb/line6/driver.h @@ -102,7 +102,7 @@ enum { Common data shared by all Line 6 devices. Corresponds to a pair of USB endpoints. */ -struct usb_line6 { +struct line6 { /* USB device */ struct usb_device *usbdev;
@@ -141,34 +141,34 @@ struct usb_line6 { /* Length of message to be processed */ int message_length;
- void (*process_message)(struct usb_line6 *);
- void (*disconnect)(struct usb_line6 *line6);
- void (*process_message)(struct line6 *);
- void (*disconnect)(struct line6 *line6);
};
-extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, +extern char *line6_alloc_sysex_buffer(struct line6 *line6, int code1, int code2, int size); -extern int line6_read_data(struct usb_line6 *line6, int address, void *data, +extern int line6_read_data(struct line6 *line6, int address, void *data, size_t datalen); -extern int line6_read_serial_number(struct usb_line6 *line6, +extern int line6_read_serial_number(struct line6 *line6, int *serial_number); -extern int line6_send_raw_message_async(struct usb_line6 *line6, +extern int line6_send_raw_message_async(struct line6 *line6, const char *buffer, int size); -extern int line6_send_sysex_message(struct usb_line6 *line6, +extern int line6_send_sysex_message(struct line6 *line6, const char *buffer, int size); extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); extern void line6_start_timer(struct timer_list *timer, unsigned long msecs, void (*function)(unsigned long), unsigned long data); -extern int line6_version_request_async(struct usb_line6 *line6); -extern int line6_write_data(struct usb_line6 *line6, int address, void *data, +extern int line6_version_request_async(struct line6 *line6); +extern int line6_write_data(struct line6 *line6, int address, void *data, size_t datalen);
int line6_probe(struct usb_interface *interface, const struct usb_device_id *id, const char *driver_name, const struct line6_properties *properties,
int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
int (*private_init)(struct line6 *, const struct usb_device_id *id),void line6_disconnect(struct usb_interface *interface); diff --git a/sound/usb/line6/midi.c b/sound/usb/line6/midi.c index cebea9b..0ad2e19 100644 --- a/sound/usb/line6/midi.c +++ b/sound/usb/line6/midi.c @@ -21,13 +21,13 @@ #define line6_rawmidi_substream_midi(substream) \ ((struct snd_line6_midi *)((substream)->rmidi->private_data))
-static int send_midi_async(struct usb_line6 *line6, unsigned char *data, +static int send_midi_async(struct line6 *line6, unsigned char *data, int length);
/* Pass data received via USB to MIDI. */ -void line6_midi_receive(struct usb_line6 *line6, unsigned char *data, +void line6_midi_receive(struct line6 *line6, unsigned char *data, int length) { if (line6->line6midi->substream_receive) @@ -40,8 +40,7 @@ void line6_midi_receive(struct usb_line6 *line6, unsigned char *data, */ static void line6_midi_transmit(struct snd_rawmidi_substream *substream) {
- struct usb_line6 *line6 =
line6_rawmidi_substream_midi(substream)->line6;
- struct line6 *line6 = line6_rawmidi_substream_midi(substream)->line6; struct snd_line6_midi *line6midi = line6->line6midi; struct midi_buffer *mb = &line6midi->midibuf_out; unsigned char chunk[LINE6_FALLBACK_MAXPACKETSIZE];
@@ -77,7 +76,7 @@ static void midi_sent(struct urb *urb) unsigned long flags; int status; int num;
- struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
struct line6 *line6 = (struct line6 *) urb->context;
status = urb->status; kfree(urb->transfer_buffer);
@@ -105,7 +104,7 @@ static void midi_sent(struct urb *urb) Assumes that line6->line6midi->lock is held (i.e., this function is serialized). */ -static int send_midi_async(struct usb_line6 *line6, unsigned char *data, +static int send_midi_async(struct line6 *line6, unsigned char *data, int length) { struct urb *urb; @@ -156,8 +155,7 @@ static void line6_midi_output_trigger(struct snd_rawmidi_substream *substream, int up) { unsigned long flags;
- struct usb_line6 *line6 =
line6_rawmidi_substream_midi(substream)->line6;
struct line6 *line6 = line6_rawmidi_substream_midi(substream)->line6;
line6->line6midi->substream_transmit = substream; spin_lock_irqsave(&line6->line6midi->lock, flags);
@@ -170,8 +168,7 @@ static void line6_midi_output_trigger(struct snd_rawmidi_substream *substream,
static void line6_midi_output_drain(struct snd_rawmidi_substream *substream) {
- struct usb_line6 *line6 =
line6_rawmidi_substream_midi(substream)->line6;
struct line6 *line6 = line6_rawmidi_substream_midi(substream)->line6; struct snd_line6_midi *midi = line6->line6midi;
wait_event_interruptible(midi->send_wait,
@@ -191,8 +188,7 @@ static int line6_midi_input_close(struct snd_rawmidi_substream *substream) static void line6_midi_input_trigger(struct snd_rawmidi_substream *substream, int up) {
- struct usb_line6 *line6 =
line6_rawmidi_substream_midi(substream)->line6;
struct line6 *line6 = line6_rawmidi_substream_midi(substream)->line6;
if (up) line6->line6midi->substream_receive = substream;
@@ -214,7 +210,7 @@ static struct snd_rawmidi_ops line6_midi_input_ops = { };
/* Create a MIDI device */ -static int snd_line6_new_midi(struct usb_line6 *line6, +static int snd_line6_new_midi(struct line6 *line6, struct snd_rawmidi **rmidi_ret) { struct snd_rawmidi *rmidi; @@ -252,7 +248,7 @@ static void snd_line6_midi_free(struct snd_rawmidi *rmidi) /* Initialize the Line 6 MIDI subsystem. */ -int line6_init_midi(struct usb_line6 *line6) +int line6_init_midi(struct line6 *line6) { int err; struct snd_rawmidi *rmidi; diff --git a/sound/usb/line6/midi.h b/sound/usb/line6/midi.h index cf82d69..2ca22b9 100644 --- a/sound/usb/line6/midi.h +++ b/sound/usb/line6/midi.h @@ -20,7 +20,7 @@
struct snd_line6_midi { /* Pointer back to the Line 6 driver data structure */
- struct usb_line6 *line6;
struct line6 *line6;
/* MIDI substream for receiving (or NULL if not active) */ struct snd_rawmidi_substream *substream_receive;
@@ -44,8 +44,8 @@ struct snd_line6_midi { struct midi_buffer midibuf_out; };
-extern int line6_init_midi(struct usb_line6 *line6); -extern void line6_midi_receive(struct usb_line6 *line6, unsigned char *data, +extern int line6_init_midi(struct line6 *line6); +extern void line6_midi_receive(struct line6 *line6, unsigned char *data, int length);
#endif diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c index 8461d6b..cd248f4 100644 --- a/sound/usb/line6/pcm.c +++ b/sound/usb/line6/pcm.c @@ -460,7 +460,7 @@ static void line6_cleanup_pcm(struct snd_pcm *pcm) }
/* create a PCM device */ -static int snd_line6_new_pcm(struct usb_line6 *line6, struct snd_pcm **pcm_ret) +static int snd_line6_new_pcm(struct line6 *line6, struct snd_pcm **pcm_ret) { struct snd_pcm *pcm; int err; @@ -500,8 +500,7 @@ void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm) Create and register the PCM device and mixer entries. Create URBs for playback and capture. */ -int line6_init_pcm(struct usb_line6 *line6,
struct line6_pcm_properties *properties)+int line6_init_pcm(struct line6 *line6, struct line6_pcm_properties *properties) { int i, err; unsigned ep_read = line6->properties->ep_audio_r; diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h index 508410a..d2d1acb 100644 --- a/sound/usb/line6/pcm.h +++ b/sound/usb/line6/pcm.h @@ -139,7 +139,7 @@ struct line6_pcm_stream {
struct snd_line6_pcm { /* Pointer back to the Line 6 driver data structure */
- struct usb_line6 *line6;
struct line6 *line6;
/* Properties. */ struct line6_pcm_properties *properties;
@@ -182,7 +182,7 @@ struct snd_line6_pcm { unsigned long flags; };
-extern int line6_init_pcm(struct usb_line6 *line6, +extern int line6_init_pcm(struct line6 *line6, struct line6_pcm_properties *properties); extern int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd); extern int snd_line6_prepare(struct snd_pcm_substream *substream); diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c index 05dee69..72debac 100644 --- a/sound/usb/line6/playback.c +++ b/sound/usb/line6/playback.c @@ -398,7 +398,7 @@ struct snd_pcm_ops snd_line6_playback_ops = {
int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm) {
- struct usb_line6 *line6 = line6pcm->line6;
struct line6 *line6 = line6pcm->line6; int i;
/* create audio URBs and fill in constant values: */
diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c index 4c3d8cb..d109a72 100644 --- a/sound/usb/line6/pod.c +++ b/sound/usb/line6/pod.c @@ -56,9 +56,9 @@ enum { LINE6_PODXTPRO, };
-struct usb_line6_pod { +struct line6_pod { /* Generic Line 6 USB data */
- struct usb_line6 line6;
struct line6 line6;
/* Instrument monitor level */ int monitor_level;
@@ -176,9 +176,9 @@ static const char pod_version_header[] = {
/* forward declarations: */ static void pod_startup2(unsigned long data); -static void pod_startup3(struct usb_line6_pod *pod); +static void pod_startup3(struct line6_pod *pod);
-static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, +static char *pod_alloc_sysex_buffer(struct line6_pod *pod, int code, int size) { return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code, @@ -188,9 +188,9 @@ static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, /* Process a completely received message. */ -static void line6_pod_process_message(struct usb_line6 *line6) +static void line6_pod_process_message(struct line6 *line6) {
- struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
struct line6_pod *pod = (struct line6_pod *) line6; const unsigned char *buf = pod->line6.buffer_message;
if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
@@ -219,8 +219,7 @@ static void line6_pod_process_message(struct usb_line6 *line6) /* Send system parameter (from integer). */ -static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
int code)+static int pod_set_system_param_int(struct line6_pod *pod, int value, int code) { char *sysex; static const int size = 5; @@ -245,7 +244,7 @@ static ssize_t serial_number_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
struct line6_pod *pod = usb_get_intfdata(interface);
return sprintf(buf, "%d\n", pod->serial_number);
} @@ -257,7 +256,7 @@ static ssize_t firmware_version_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
struct line6_pod *pod = usb_get_intfdata(interface);
return sprintf(buf, "%d.%02d\n", pod->firmware_version / 100, pod->firmware_version % 100);
@@ -270,7 +269,7 @@ static ssize_t device_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_interface *interface = to_usb_interface(dev);
- struct usb_line6_pod *pod = usb_get_intfdata(interface);
struct line6_pod *pod = usb_get_intfdata(interface);
return sprintf(buf, "%d\n", pod->device_id);
} @@ -282,7 +281,7 @@ static ssize_t device_id_show(struct device *dev, context). After the last one has finished, the device is ready to use. */
-static void pod_startup1(struct usb_line6_pod *pod) +static void pod_startup1(struct line6_pod *pod) { CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_INIT);
@@ -293,8 +292,8 @@ static void pod_startup1(struct usb_line6_pod *pod)
static void pod_startup2(unsigned long data) {
- struct usb_line6_pod *pod = (struct usb_line6_pod *)data;
- struct usb_line6 *line6 = &pod->line6;
struct line6_pod *pod = (struct line6_pod *) data;
struct line6 *line6 = &pod->line6;
CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ);
@@ -302,7 +301,7 @@ static void pod_startup2(unsigned long data) line6_version_request_async(line6); }
-static void pod_startup3(struct usb_line6_pod *pod) +static void pod_startup3(struct line6_pod *pod) { CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_WORKQUEUE);
@@ -312,9 +311,9 @@ static void pod_startup3(struct usb_line6_pod *pod)
static void pod_startup4(struct work_struct *work) {
- struct usb_line6_pod *pod =
container_of(work, struct usb_line6_pod, startup_work);- struct usb_line6 *line6 = &pod->line6;
struct line6_pod *pod = container_of(work, struct line6_pod,
startup_work);struct line6 *line6 = &pod->line6;
CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_SETUP);
@@ -346,7 +345,7 @@ static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
- struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
struct line6_pod *pod = (struct line6_pod *) line6pcm->line6;
ucontrol->value.integer.value[0] = pod->monitor_level; return 0;
@@ -357,7 +356,7 @@ static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
- struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
struct line6_pod *pod = (struct line6_pod *) line6pcm->line6;
if (ucontrol->value.integer.value[0] == pod->monitor_level) return 0;
@@ -382,9 +381,9 @@ static struct snd_kcontrol_new pod_control_monitor = { /* POD device disconnected. */ -static void line6_pod_disconnect(struct usb_line6 *line6) +static void line6_pod_disconnect(struct line6 *line6) {
- struct usb_line6_pod *pod = (struct usb_line6_pod *)line6;
struct line6_pod *pod = (struct line6_pod *) line6; struct device *dev = line6->ifcdev;
/* remove sysfs entries: */
@@ -418,11 +417,10 @@ static int pod_create_files2(struct device *dev) /* Try to init POD device. */ -static int pod_init(struct usb_line6 *line6,
const struct usb_device_id *id)+static int pod_init(struct line6 *line6, const struct usb_device_id *id) { int err;
- struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
struct line6_pod *pod = (struct line6_pod *) line6;
line6->process_message = line6_pod_process_message; line6->disconnect = line6_pod_disconnect;
@@ -576,7 +574,7 @@ static int pod_probe(struct usb_interface *interface, { return line6_probe(interface, id, "Line 6 POD", &pod_properties_table[id->driver_info],
pod_init, sizeof(struct usb_line6_pod));
pod_init, sizeof(struct line6_pod));}
static struct usb_driver pod_driver = { diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index f0a761b..d4399e7 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -79,8 +79,7 @@ static struct line6_pcm_properties podhd_pcm_properties = { /* Try to init POD HD device. */ -static int podhd_init(struct usb_line6 *line6,
const struct usb_device_id *id)+static int podhd_init(struct line6 *line6, const struct usb_device_id *id) { int err;
@@ -171,7 +170,7 @@ static int podhd_probe(struct usb_interface *interface, { return line6_probe(interface, id, "Line 6 PODHD", &podhd_properties_table[id->driver_info],
podhd_init, sizeof(struct usb_line6));
podhd_init, sizeof(struct line6));}
static struct usb_driver podhd_driver = { diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index 53c0fbd..b5fe92f 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -32,18 +32,18 @@ enum line6_device_type { LINE6_TONEPORT_UX2, };
-struct usb_line6_toneport; +struct line6_toneport;
struct toneport_led { struct led_classdev dev; char name[64];
- struct usb_line6_toneport *toneport;
- struct line6_toneport *toneport; bool registered;
};
-struct usb_line6_toneport { +struct line6_toneport { /* Generic Line 6 USB data */
- struct usb_line6 line6;
struct line6 line6;
/* Source selector */ int source;
@@ -214,8 +214,8 @@ static int snd_toneport_source_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
- struct usb_line6_toneport *toneport =
(struct usb_line6_toneport *)line6pcm->line6;
- struct line6_toneport *toneport =
(struct line6_toneport *) line6pcm->line6;} @@ -225,8 +225,8 @@ static int snd_toneport_source_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
- struct usb_line6_toneport *toneport =
(struct usb_line6_toneport *)line6pcm->line6;
struct line6_toneport *toneport =
(struct line6_toneport *) line6pcm->line6;unsigned int source;
source = ucontrol->value.enumerated.item[0];
@@ -243,8 +243,8 @@ static int snd_toneport_source_put(struct snd_kcontrol *kcontrol,
static void toneport_start_pcm(unsigned long arg) {
- struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)arg;
- struct usb_line6 *line6 = &toneport->line6;
struct line6_toneport *toneport = (struct line6_toneport *) arg;
struct line6 *line6 = &toneport->line6;
line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR);
} @@ -278,7 +278,7 @@ static struct snd_kcontrol_new toneport_control_source = { (void cmd_0x02(byte red, byte green) */
-static bool toneport_has_led(struct usb_line6_toneport *toneport) +static bool toneport_has_led(struct line6_toneport *toneport) { switch (toneport->type) { case LINE6_GUITARPORT: @@ -294,7 +294,7 @@ static bool toneport_has_led(struct usb_line6_toneport *toneport) static const char * const led_colors[2] = { "red", "green" }; static const int led_init_vals[2] = { 0x00, 0x26 };
-static void toneport_update_led(struct usb_line6_toneport *toneport) +static void toneport_update_led(struct line6_toneport *toneport) { toneport_send_cmd(toneport->line6.usbdev, (toneport->leds[0].dev.brightness << 8) | 0x0002, @@ -309,7 +309,7 @@ static void toneport_led_brightness_set(struct led_classdev *led_cdev, toneport_update_led(leds->toneport); }
-static int toneport_init_leds(struct usb_line6_toneport *toneport) +static int toneport_init_leds(struct line6_toneport *toneport) { struct device *dev = &toneport->line6.usbdev->dev; int i, err; @@ -334,7 +334,7 @@ static int toneport_init_leds(struct usb_line6_toneport *toneport) return 0; }
-static void toneport_remove_leds(struct usb_line6_toneport *toneport) +static void toneport_remove_leds(struct line6_toneport *toneport) { struct toneport_led *led; int i; @@ -348,7 +348,7 @@ static void toneport_remove_leds(struct usb_line6_toneport *toneport) } }
-static bool toneport_has_source_select(struct usb_line6_toneport *toneport) +static bool toneport_has_source_select(struct line6_toneport *toneport) { switch (toneport->type) { case LINE6_TONEPORT_UX1: @@ -365,10 +365,10 @@ static bool toneport_has_source_select(struct usb_line6_toneport *toneport) /* Setup Toneport device. */ -static void toneport_setup(struct usb_line6_toneport *toneport) +static void toneport_setup(struct line6_toneport *toneport) { int ticks;
- struct usb_line6 *line6 = &toneport->line6;
struct line6 *line6 = &toneport->line6; struct usb_device *usbdev = line6->usbdev;
/* sync time on device with host: */
@@ -393,10 +393,9 @@ static void toneport_setup(struct usb_line6_toneport *toneport) /* Toneport device disconnected. */ -static void line6_toneport_disconnect(struct usb_line6 *line6) +static void line6_toneport_disconnect(struct line6 *line6) {
- struct usb_line6_toneport *toneport =
(struct usb_line6_toneport *)line6;
struct line6_toneport *toneport = (struct line6_toneport *) line6;
del_timer_sync(&toneport->timer);
@@ -408,11 +407,11 @@ static void line6_toneport_disconnect(struct usb_line6 *line6) /* Try to init Toneport device. */ -static int toneport_init(struct usb_line6 *line6, +static int toneport_init(struct line6 *line6, const struct usb_device_id *id) { int err;
- struct usb_line6_toneport *toneport = (struct usb_line6_toneport *) line6;
struct line6_toneport *toneport = (struct line6_toneport *) line6;
toneport->type = id->driver_info; setup_timer(&toneport->timer, toneport_start_pcm,
@@ -559,7 +558,7 @@ static int toneport_probe(struct usb_interface *interface, { return line6_probe(interface, id, "Line 6 TonePort", &toneport_properties_table[id->driver_info],
toneport_init, sizeof(struct usb_line6_toneport));
toneport_init, sizeof(struct line6_toneport));}
static struct usb_driver toneport_driver = { diff --git a/sound/usb/line6/variax.c b/sound/usb/line6/variax.c index 6f35c96..fc7438a 100644 --- a/sound/usb/line6/variax.c +++ b/sound/usb/line6/variax.c @@ -40,9 +40,9 @@ enum { LINE6_VARIAX };
-struct usb_line6_variax { +struct line6_variax { /* Generic Line 6 USB data */
- struct usb_line6 line6;
struct line6 line6;
/* Buffer for activation code */ unsigned char *buffer_activate;
@@ -86,7 +86,7 @@ static void variax_startup2(unsigned long data); static void variax_startup4(unsigned long data); static void variax_startup5(unsigned long data);
-static void variax_activate_async(struct usb_line6_variax *variax, int a) +static void variax_activate_async(struct line6_variax *variax, int a) { variax->buffer_activate[VARIAX_OFFSET_ACTIVATE] = a; line6_send_raw_message_async(&variax->line6, variax->buffer_activate, @@ -100,7 +100,7 @@ static void variax_activate_async(struct usb_line6_variax *variax, int a) context). After the last one has finished, the device is ready to use. */
-static void variax_startup1(struct usb_line6_variax *variax) +static void variax_startup1(struct line6_variax *variax) { CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_INIT);
@@ -111,8 +111,8 @@ static void variax_startup1(struct usb_line6_variax *variax)
static void variax_startup2(unsigned long data) {
- struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
- struct usb_line6 *line6 = &variax->line6;
struct line6_variax *variax = (struct line6_variax *) data;
struct line6 *line6 = &variax->line6;
/* schedule another startup procedure until startup is complete: */ if (variax->startup_progress >= VARIAX_STARTUP_LAST)
@@ -126,7 +126,7 @@ static void variax_startup2(unsigned long data) line6_version_request_async(line6); }
-static void variax_startup3(struct usb_line6_variax *variax) +static void variax_startup3(struct line6_variax *variax) { CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_WAIT);
@@ -137,7 +137,7 @@ static void variax_startup3(struct usb_line6_variax *variax)
static void variax_startup4(unsigned long data) {
- struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
struct line6_variax *variax = (struct line6_variax *) data;
CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_ACTIVATE);
@@ -150,7 +150,7 @@ static void variax_startup4(unsigned long data)
static void variax_startup5(unsigned long data) {
- struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
struct line6_variax *variax = (struct line6_variax *) data;
CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_WORKQUEUE);
@@ -161,8 +161,8 @@ static void variax_startup5(unsigned long data)
static void variax_startup6(struct work_struct *work) {
- struct usb_line6_variax *variax =
container_of(work, struct usb_line6_variax, startup_work);
struct line6_variax *variax = container_of(work, struct line6_variax,
startup_work);CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_SETUP);
@@ -173,9 +173,9 @@ static void variax_startup6(struct work_struct *work) /* Process a completely received message. */ -static void line6_variax_process_message(struct usb_line6 *line6) +static void line6_variax_process_message(struct line6 *line6) {
- struct usb_line6_variax *variax = (struct usb_line6_variax *) line6;
struct line6_variax *variax = (struct line6_variax *) line6; const unsigned char *buf = variax->line6.buffer_message;
switch (buf[0]) {
@@ -190,7 +190,7 @@ static void line6_variax_process_message(struct usb_line6 *line6) } else if (memcmp(buf + 1, variax_init_done + 1, sizeof(variax_init_done) - 1) == 0) { /* notify of complete initialization: */
variax_startup4((unsigned long)variax);
variax_startup4((unsigned long) variax);@@ -199,9 +199,9 @@ static void line6_variax_process_message(struct usb_line6 *line6) /* Variax destructor. */ -static void line6_variax_disconnect(struct usb_line6 *line6) +static void line6_variax_disconnect(struct line6 *line6) {
- struct usb_line6_variax *variax = (struct usb_line6_variax *)line6;
struct line6_variax *variax = (struct line6_variax *) line6;
del_timer(&variax->startup_timer1); del_timer(&variax->startup_timer2);
@@ -213,10 +213,9 @@ static void line6_variax_disconnect(struct usb_line6 *line6) /* Try to init workbench device. */ -static int variax_init(struct usb_line6 *line6,
const struct usb_device_id *id)+static int variax_init(struct line6 *line6, const struct usb_device_id *id) {
- struct usb_line6_variax *variax = (struct usb_line6_variax *) line6;
struct line6_variax *variax = (struct line6_variax *) line6; int err;
line6->process_message = line6_variax_process_message;
@@ -285,7 +284,7 @@ static int variax_probe(struct usb_interface *interface, { return line6_probe(interface, id, "Line 6 Variax", &variax_properties_table[id->driver_info],
variax_init, sizeof(struct usb_line6_variax));
variax_init, sizeof(struct line6_variax));}
static struct usb_driver variax_driver = {
2.1.0
participants (2)
-
Chris Rorvick -
Takashi Iwai