The wm8960 codec is not readable, resulting in a NACK for address 0x3d (8-bit). This can partially indicate it. For example: wm8962 codec use the same address but is readable. This additional probe check will help prevent loading the wm8960 module incorrectly on wm8962 hardware.

Signed-off-by: Frank Li Frank.Li@nxp.com --- sound/soc/codecs/wm8960.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 0d167238a369..783c85912c59 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -1415,6 +1415,7 @@ static int wm8960_i2c_probe(struct i2c_client *i2c) struct wm8960_data *pdata = dev_get_platdata(&i2c->dev); struct wm8960_priv *wm8960; int ret; + u8 val;

wm8960 = devm_kzalloc(&i2c->dev, sizeof(struct wm8960_priv), GFP_KERNEL); @@ -1436,6 +1437,12 @@ static int wm8960_i2c_probe(struct i2c_client *i2c) else if (i2c->dev.of_node) wm8960_set_pdata_from_of(i2c, &wm8960->pdata);

+ ret = i2c_master_recv(i2c, &val, sizeof(val)); + if (ret >= 0) { + dev_err(&i2c->dev, "Not wm8960, wm8960 reg can not read by i2c\n"); + return -EINVAL; + } + ret = wm8960_reset(wm8960->regmap); if (ret != 0) { dev_err(&i2c->dev, "Failed to issue reset\n");