[PATCH] ASoC: amd: Update Pink Sardine platform ACP register header
Update Pink Sardine platform ACP register header with Soundwire Controller specific registers and other ACP registers.
Signed-off-by: Vijendar Mukunda Vijendar.Mukunda@amd.com --- include/sound/acp62_chip_offset_byte.h | 214 +++++++++++++++++++++++++ 1 file changed, 214 insertions(+)
diff --git a/include/sound/acp62_chip_offset_byte.h b/include/sound/acp62_chip_offset_byte.h index f03992f81168..ca38f8a0966e 100644 --- a/include/sound/acp62_chip_offset_byte.h +++ b/include/sound/acp62_chip_offset_byte.h @@ -131,6 +131,23 @@ #define ACP_I2S_WAKE_EN 0x000145C #define ACP_SW1_WAKE_EN 0x0001460
+#define ACP_SW_I2S_ERROR_REASON 0x00018B4 +#define ACP_SW_POS_TRACK_I2S_TX_CTRL 0x00018B8 +#define ACP_SW_I2S_TX_DMA_POS 0x00018BC +#define ACP_SW_POS_TRACK_BT_TX_CTRL 0x00018C0 +#define ACP_SW_BT_TX_DMA_POS 0x00018C4 +#define ACP_SW_POS_TRACK_HS_TX_CTRL 0x00018C8 +#define ACP_SW_HS_TX_DMA_POS 0x00018CC +#define ACP_SW_POS_TRACK_I2S_RX_CTRL 0x00018D0 +#define ACP_SW_I2S_RX_DMA_POS 0x00018D4 +#define ACP_SW_POS_TRACK_BT_RX_CTRL 0x00018D8 +#define ACP_SW_BT_RX_DMA_POS 0x00018DC +#define ACP_SW_POS_TRACK_HS_RX_CTRL 0x00018E0 +#define ACP_SW_HS_RX_DMA_POS 0x00018E4 +#define ACP_ERROR_INTR_MASK1 0X0001974 +#define ACP_ERROR_INTR_MASK2 0X0001978 +#define ACP_ERROR_INTR_MASK3 0X000197C + /* Registers from ACP_P1_MISC block */ #define ACP_EXTERNAL_INTR_ENB 0x0001A00 #define ACP_EXTERNAL_INTR_CNTL 0x0001A04 @@ -154,6 +171,8 @@ #define ACP_P1_SW_BT_RX_DMA_POS 0x0001A9C #define ACP_P1_SW_POS_TRACK_HS_RX_CTRL 0x0001AA0 #define ACP_P1_SW_HS_RX_DMA_POS 0x0001AA4 +#define ACP_ERROR_INTR_MASK4 0X0001AEC +#define ACP_ERROR_INTR_MASK5 0X0001AF0
/* Registers from ACP_AUDIO_BUFFERS block */ #define ACP_I2S_RX_RINGBUFADDR 0x0002000 @@ -210,6 +229,24 @@ #define ACP_HS_TX_LINEARPOSITIONCNTR_HIGH 0x00020CC #define ACP_HS_TX_LINEARPOSITIONCNTR_LOW 0x00020D0 #define ACP_HS_TX_INTR_WATERMARK_SIZE 0x00020D4 +#define ACP_AUDIO_RX_RINGBUFADDR ACP_I2S_RX_RINGBUFADDR +#define ACP_AUDIO_RX_RINGBUFSIZE ACP_I2S_RX_RINGBUFSIZE +#define ACP_AUDIO_RX_LINKPOSITIONCNTR ACP_I2S_RX_LINKPOSITIONCNTR +#define ACP_AUDIO_RX_FIFOADDR ACP_I2S_RX_FIFOADDR +#define ACP_AUDIO_RX_FIFOSIZE ACP_I2S_RX_FIFOSIZE +#define ACP_AUDIO_RX_DMA_SIZE ACP_I2S_RX_DMA_SIZE +#define ACP_AUDIO_RX_LINEARPOSITIONCNTR_HIGH ACP_I2S_RX_LINEARPOSITIONCNTR_HIGH +#define ACP_AUDIO_RX_LINEARPOSITIONCNTR_LOW ACP_I2S_RX_LINEARPOSITIONCNTR_LOW +#define ACP_AUDIO_RX_INTR_WATERMARK_SIZE ACP_I2S_RX_INTR_WATERMARK_SIZE +#define ACP_AUDIO_TX_RINGBUFADDR ACP_I2S_TX_RINGBUFADDR +#define ACP_AUDIO_TX_RINGBUFSIZE ACP_I2S_TX_RINGBUFSIZE +#define ACP_AUDIO_TX_LINKPOSITIONCNTR ACP_I2S_TX_LINKPOSITIONCNTR +#define ACP_AUDIO_TX_FIFOADDR ACP_I2S_TX_FIFOADDR +#define ACP_AUDIO_TX_FIFOSIZE ACP_I2S_TX_FIFOSIZE +#define ACP_AUDIO_TX_DMA_SIZE ACP_I2S_TX_DMA_SIZE +#define ACP_AUDIO_TX_LINEARPOSITIONCNTR_HIGH ACP_I2S_TX_LINEARPOSITIONCNTR_HIGH +#define ACP_AUDIO_TX_LINEARPOSITIONCNTR_LOW ACP_I2S_TX_LINEARPOSITIONCNTR_LOW +#define ACP_AUDIO_TX_INTR_WATERMARK_SIZE ACP_I2S_TX_INTR_WATERMARK_SIZE
/* Registers from ACP_I2S_TDM block */ #define ACP_I2STDM_IER 0x0002400 @@ -255,6 +292,102 @@ #define ACP_WOV_ERROR_STATUS_REGISTER 0x0002C68 #define ACP_PDM_CLKDIV 0x0002C6C
+/* Registers from ACP_SW_SWCLK block */ +#define ACP_SW_EN 0x0003000 +#define ACP_SW_EN_STATUS 0x0003004 +#define ACP_SW_FRAMESIZE 0x0003008 +#define ACP_SW_SSP_COUNTER 0x000300C +#define ACP_SW_AUDIO_TX_EN 0x0003010 +#define ACP_SW_AUDIO_TX_EN_STATUS 0x0003014 +#define ACP_SW_AUDIO_TX_FRAME_FORMAT 0x0003018 +#define ACP_SW_AUDIO_TX_SAMPLEINTERVAL 0x000301C +#define ACP_SW_AUDIO_TX_HCTRL_DP0 0x0003020 +#define ACP_SW_AUDIO_TX_HCTRL_DP1 0x0003024 +#define ACP_SW_AUDIO_TX_HCTRL_DP2 0x0003028 +#define ACP_SW_AUDIO_TX_HCTRL_DP3 0x000302C +#define ACP_SW_AUDIO_TX_OFFSET_DP0 0x0003030 +#define ACP_SW_AUDIO_TX_OFFSET_DP1 0x0003034 +#define ACP_SW_AUDIO_TX_OFFSET_DP2 0x0003038 +#define ACP_SW_AUDIO_TX_OFFSET_DP3 0x000303C +#define ACP_SW_AUDIO_TX_CHANNEL_ENABLE_DP0 0x0003040 +#define ACP_SW_AUDIO_TX_CHANNEL_ENABLE_DP1 0x0003044 +#define ACP_SW_AUDIO_TX_CHANNEL_ENABLE_DP2 0x0003048 +#define ACP_SW_AUDIO_TX_CHANNEL_ENABLE_DP3 0x000304C +#define ACP_SW_BT_TX_EN 0x0003050 +#define ACP_SW_BT_TX_EN_STATUS 0x0003054 +#define ACP_SW_BT_TX_FRAME_FORMAT 0x0003058 +#define ACP_SW_BT_TX_SAMPLEINTERVAL 0x000305C +#define ACP_SW_BT_TX_HCTRL 0x0003060 +#define ACP_SW_BT_TX_OFFSET 0x0003064 +#define ACP_SW_BT_TX_CHANNEL_ENABLE_DP0 0x0003068 +#define ACP_SW_HEADSET_TX_EN 0x000306C +#define ACP_SW_HEADSET_TX_EN_STATUS 0x0003070 +#define ACP_SW_HEADSET_TX_FRAME_FORMAT 0x0003074 +#define ACP_SW_HEADSET_TX_SAMPLEINTERVAL 0x0003078 +#define ACP_SW_HEADSET_TX_HCTRL 0x000307C +#define ACP_SW_HEADSET_TX_OFFSET 0x0003080 +#define ACP_SW_HEADSET_TX_CHANNEL_ENABLE_DP0 0x0003084 +#define ACP_SW_AUDIO_RX_EN 0x0003088 +#define ACP_SW_AUDIO_RX_EN_STATUS 0x000308C +#define ACP_SW_AUDIO_RX_FRAME_FORMAT 0x0003090 +#define ACP_SW_AUDIO_RX_SAMPLEINTERVAL 0x0003094 +#define ACP_SW_AUDIO_RX_HCTRL_DP0 0x0003098 +#define ACP_SW_AUDIO_RX_HCTRL_DP1 0x000309C +#define ACP_SW_AUDIO_RX_HCTRL_DP2 0x0003100 +#define ACP_SW_AUDIO_RX_HCTRL_DP3 0x0003104 +#define ACP_SW_AUDIO_RX_OFFSET_DP0 0x0003108 +#define ACP_SW_AUDIO_RX_OFFSET_DP1 0x000310C +#define ACP_SW_AUDIO_RX_OFFSET_DP2 0x0003110 +#define ACP_SW_AUDIO_RX_OFFSET_DP3 0x0003114 +#define ACP_SW_AUDIO_RX_CHANNEL_ENABLE_DP0 0x0003118 +#define ACP_SW_AUDIO_RX_CHANNEL_ENABLE_DP1 0x000311C +#define ACP_SW_AUDIO_RX_CHANNEL_ENABLE_DP2 0x0003120 +#define ACP_SW_AUDIO_RX_CHANNEL_ENABLE_DP3 0x0003124 +#define ACP_SW_BT_RX_EN 0x0003128 +#define ACP_SW_BT_RX_EN_STATUS 0x000312C +#define ACP_SW_BT_RX_FRAME_FORMAT 0x0003130 +#define ACP_SW_BT_RX_SAMPLEINTERVAL 0x0003134 +#define ACP_SW_BT_RX_HCTRL 0x0003138 +#define ACP_SW_BT_RX_OFFSET 0x000313C +#define ACP_SW_BT_RX_CHANNEL_ENABLE_DP0 0x0003140 +#define ACP_SW_HEADSET_RX_EN 0x0003144 +#define ACP_SW_HEADSET_RX_EN_STATUS 0x0003148 +#define ACP_SW_HEADSET_RX_FRAME_FORMAT 0x000314C +#define ACP_SW_HEADSET_RX_SAMPLEINTERVAL 0x0003150 +#define ACP_SW_HEADSET_RX_HCTRL 0x0003154 +#define ACP_SW_HEADSET_RX_OFFSET 0x0003158 +#define ACP_SW_HEADSET_RX_CHANNEL_ENABLE_DP0 0x000315C +#define ACP_SW_BPT_PORT_EN 0x0003160 +#define ACP_SW_BPT_PORT_EN_STATUS 0x0003164 +#define ACP_SW_BPT_PORT_FRAME_FORMAT 0x0003168 +#define ACP_SW_BPT_PORT_SAMPLEINTERVAL 0x000316C +#define ACP_SW_BPT_PORT_HCTRL 0x0003170 +#define ACP_SW_BPT_PORT_OFFSET 0x0003174 +#define ACP_SW_BPT_PORT_CHANNEL_ENABLE 0x0003178 +#define ACP_SW_BPT_PORT_FIRST_BYTE_ADDR 0x000317C +#define ACP_SW_CLK_RESUME_CTRL 0x0003180 +#define ACP_SW_CLK_RESUME_DELAY_CNTR 0x0003184 +#define ACP_SW_BUS_RESET_CTRL 0x0003188 +#define ACP_SW_PRBS_ERR_STATUS 0x000318C +#define SW_IMM_CMD_UPPER_WORD 0x0003230 +#define SW_IMM_CMD_LOWER_QWORD 0x0003234 +#define SW_IMM_RESP_UPPER_WORD 0x0003238 +#define SW_IMM_RESP_LOWER_QWORD 0x000323C +#define SW_IMM_CMD_STS 0x0003240 +#define SW_BRA_BASE_ADDRESS 0x0003244 +#define SW_BRA_TRANSFER_SIZE 0x0003248 +#define SW_BRA_DMA_BUSY 0x000324C +#define SW_BRA_RESP 0x0003250 +#define SW_BRA_RESP_FRAME_ADDR 0x0003254 +#define SW_BRA_CURRENT_TRANSFER_SIZE 0x0003258 +#define SW_STATE_CHANGE_STATUS_0TO7 0x000325C +#define SW_STATE_CHANGE_STATUS_8TO11 0x0003260 +#define SW_STATE_CHANGE_STATUS_MASK_0TO7 0x0003264 +#define SW_STATE_CHANGE_STATUS_MASK_8TO11 0x0003268 +#define SW_CLK_FREQUENCY_CTRL 0x000326C +#define SW_ERROR_INTR_MASK 0x0003270 +#define SW_PHY_TEST_MODE_DATA_OFF 0x0003274 + /* Registers from ACP_P1_AUDIO_BUFFERS block */ #define ACP_P1_I2S_RX_RINGBUFADDR 0x0003A00 #define ACP_P1_I2S_RX_RINGBUFSIZE 0x0003A04 @@ -310,6 +443,87 @@ #define ACP_P1_HS_TX_LINEARPOSITIONCNTR_HIGH 0x0003ACC #define ACP_P1_HS_TX_LINEARPOSITIONCNTR_LOW 0x0003AD0 #define ACP_P1_HS_TX_INTR_WATERMARK_SIZE 0x0003AD4 +#define ACP_P1_AUDIO_RX_RINGBUFADDR ACP_P1_I2S_RX_RINGBUFADDR +#define ACP_P1_AUDIO_RX_RINGBUFSIZE ACP_P1_I2S_RX_RINGBUFSIZE +#define ACP_P1_AUDIO_RX_LINKPOSITIONCNTR ACP_P1_I2S_RX_LINKPOSITIONCNTR +#define ACP_P1_AUDIO_RX_FIFOADDR ACP_P1_I2S_RX_FIFOADDR +#define ACP_P1_AUDIO_RX_FIFOSIZE ACP_P1_I2S_RX_FIFOSIZE +#define ACP_P1_AUDIO_RX_DMA_SIZE ACP_P1_I2S_RX_DMA_SIZE +#define ACP_P1_AUDIO_RX_LINEARPOSITIONCNTR_HIGH ACP_P1_I2S_RX_LINEARPOSITIONCNTR_HIGH +#define ACP_P1_AUDIO_RX_LINEARPOSITIONCNTR_LOW ACP_P1_I2S_RX_LINEARPOSITIONCNTR_LOW +#define ACP_P1_AUDIO_RX_INTR_WATERMARK_SIZE ACP_P1_I2S_RX_INTR_WATERMARK_SIZE +#define ACP_P1_AUDIO_TX_RINGBUFADDR ACP_P1_I2S_TX_RINGBUFADDR +#define ACP_P1_AUDIO_TX_RINGBUFSIZE ACP_P1_I2S_TX_RINGBUFSIZE +#define ACP_P1_AUDIO_TX_LINKPOSITIONCNTR ACP_P1_I2S_TX_LINKPOSITIONCNTR +#define ACP_P1_AUDIO_TX_FIFOADDR ACP_P1_I2S_TX_FIFOADDR +#define ACP_P1_AUDIO_TX_FIFOSIZE ACP_P1_I2S_TX_FIFOSIZE +#define ACP_P1_AUDIO_TX_DMA_SIZE ACP_P1_I2S_TX_DMA_SIZE +#define ACP_P1_AUDIO_TX_LINEARPOSITIONCNTR_HIGH ACP_P1_I2S_TX_LINEARPOSITIONCNTR_HIGH +#define ACP_P1_AUDIO_TX_LINEARPOSITIONCNTR_LOW ACP_P1_I2S_TX_LINEARPOSITIONCNTR_LOW +#define ACP_P1_AUDIO_TX_INTR_WATERMARK_SIZE ACP_P1_I2S_TX_INTR_WATERMARK_SIZE + +/* Registers from ACP_P1_SW_SWCLK block */ +#define ACP_P1_SW_EN 0x0003C00 +#define ACP_P1_SW_EN_STATUS 0x0003C04 +#define ACP_P1_SW_FRAMESIZE 0x0003C08 +#define ACP_P1_SW_SSP_COUNTER 0x0003C0C +#define ACP_P1_SW_BT_TX_EN 0x0003C50 +#define ACP_P1_SW_BT_TX_EN_STATUS 0x0003C54 +#define ACP_P1_SW_BT_TX_FRAME_FORMAT 0x0003C58 +#define ACP_P1_SW_BT_TX_SAMPLEINTERVAL 0x0003C5C +#define ACP_P1_SW_BT_TX_HCTRL 0x0003C60 +#define ACP_P1_SW_BT_TX_OFFSET 0x0003C64 +#define ACP_P1_SW_BT_TX_CHANNEL_ENABLE_DP0 0x0003C68 +#define ACP_P1_SW_BT_RX_EN 0x0003D28 +#define ACP_P1_SW_BT_RX_EN_STATUS 0x0003D2C +#define ACP_P1_SW_BT_RX_FRAME_FORMAT 0x0003D30 +#define ACP_P1_SW_BT_RX_SAMPLEINTERVAL 0x0003D34 +#define ACP_P1_SW_BT_RX_HCTRL 0x0003D38 +#define ACP_P1_SW_BT_RX_OFFSET 0x0003D3C +#define ACP_P1_SW_BT_RX_CHANNEL_ENABLE_DP0 0x0003D40 +#define ACP_P1_SW_BPT_PORT_EN 0x0003D60 +#define ACP_P1_SW_BPT_PORT_EN_STATUS 0x0003D64 +#define ACP_P1_SW_BPT_PORT_FRAME_FORMAT 0x0003D68 +#define ACP_P1_SW_BPT_PORT_SAMPLEINTERVAL 0x0003D6C +#define ACP_P1_SW_BPT_PORT_HCTRL 0x0003D70 +#define ACP_P1_SW_BPT_PORT_OFFSET 0x0003D74 +#define ACP_P1_SW_BPT_PORT_CHANNEL_ENABLE 0x0003D78 +#define ACP_P1_SW_BPT_PORT_FIRST_BYTE_ADDR 0x0003D7C +#define ACP_P1_SW_CLK_RESUME_CTRL 0x0003D80 +#define ACP_P1_SW_CLK_RESUME_DELAY_CNTR 0x0003D84 +#define ACP_P1_SW_BUS_RESET_CTRL 0x0003D88 +#define ACP_P1_SW_PRBS_ERR_STATUS 0x0003D8C + +/* Registers from ACP_P1_SW_ACLK block */ +#define P1_SW_CORB_BASE_ADDRESS 0x0003E00 +#define P1_SW_CORB_WRITE_POINTER 0x0003E04 +#define P1_SW_CORB_READ_POINTER 0x0003E08 +#define P1_SW_CORB_CONTROL 0x0003E0C +#define P1_SW_CORB_SIZE 0x0003E14 +#define P1_SW_RIRB_BASE_ADDRESS 0x0003E18 +#define P1_SW_RIRB_WRITE_POINTER 0x0003E1C +#define P1_SW_RIRB_RESPONSE_INTERRUPT_COUNT 0x0003E20 +#define P1_SW_RIRB_CONTROL 0x0003E24 +#define P1_SW_RIRB_SIZE 0x0003E28 +#define P1_SW_RIRB_FIFO_MIN_THDL 0x0003E2C +#define P1_SW_IMM_CMD_UPPER_WORD 0x0003E30 +#define P1_SW_IMM_CMD_LOWER_QWORD 0x0003E34 +#define P1_SW_IMM_RESP_UPPER_WORD 0x0003E38 +#define P1_SW_IMM_RESP_LOWER_QWORD 0x0003E3C +#define P1_SW_IMM_CMD_STS 0x0003E40 +#define P1_SW_BRA_BASE_ADDRESS 0x0003E44 +#define P1_SW_BRA_TRANSFER_SIZE 0x0003E48 +#define P1_SW_BRA_DMA_BUSY 0x0003E4C +#define P1_SW_BRA_RESP 0x0003E50 +#define P1_SW_BRA_RESP_FRAME_ADDR 0x0003E54 +#define P1_SW_BRA_CURRENT_TRANSFER_SIZE 0x0003E58 +#define P1_SW_STATE_CHANGE_STATUS_0TO7 0x0003E5C +#define P1_SW_STATE_CHANGE_STATUS_8TO11 0x0003E60 +#define P1_SW_STATE_CHANGE_STATUS_MASK_0TO7 0x0003E64 +#define P1_SW_STATE_CHANGE_STATUS_MASK_8TO11 0x0003E68 +#define P1_SW_CLK_FREQUENCY_CTRL 0x0003E6C +#define P1_SW_ERROR_INTR_MASK 0x0003E70 +#define P1_SW_PHY_TEST_MODE_DATA_OFF 0x0003E74
/* Registers from ACP_SCRATCH block */ #define ACP_SCRATCH_REG_0 0x0010000
On Mon, 10 Oct 2022 15:09:40 +0530, Vijendar Mukunda wrote:
Update Pink Sardine platform ACP register header with Soundwire Controller specific registers and other ACP registers.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: amd: Update Pink Sardine platform ACP register header commit: 9f879fb1a7b6c964dcde96c4cca8eb4444318560
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Mark Brown
-
Vijendar Mukunda