[PATCH 0/5] soundwire: better error handling in deferred transfers
This is a generic cleanup series.
Pierre-Louis Bossart (5): soundwire: stream: uniquify dev_err() logs soundwire: stream: use consistent pattern for freeing buffers soundwire: bus: remove sdw_defer argument in sdw_transfer_defer() soundwire: cadence: use directly bus sdw_defer structure soundwire: cadence: further simplify low-level xfer_msg_defer() callback
drivers/soundwire/bus.c | 12 +++++------- drivers/soundwire/bus.h | 3 +-- drivers/soundwire/cadence_master.c | 20 ++++++++++---------- drivers/soundwire/cadence_master.h | 5 +---- drivers/soundwire/stream.c | 22 ++++++++++++---------- include/linux/soundwire/sdw.h | 6 +++--- 6 files changed, 32 insertions(+), 36 deletions(-)
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
There are a couple of duplicate logs which makes harder than needed to follow the error flows. Add __func__ or make the log unique.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com --- drivers/soundwire/stream.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index df3b36670df4..e0eae0b98267 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1389,7 +1389,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream,
ret = do_bank_switch(stream); if (ret < 0) { - dev_err(bus->dev, "Bank switch failed: %d\n", ret); + dev_err(bus->dev, "do_bank_switch failed: %d\n", ret); goto restore_params; }
@@ -1477,7 +1477,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream) /* Program params */ ret = sdw_program_params(bus, false); if (ret < 0) { - dev_err(bus->dev, "Program params failed: %d\n", ret); + dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret); return ret; }
@@ -1567,7 +1567,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream) /* Program params */ ret = sdw_program_params(bus, false); if (ret < 0) { - dev_err(bus->dev, "Program params failed: %d\n", ret); + dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret); return ret; } } @@ -1664,7 +1664,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream) /* Program params */ ret = sdw_program_params(bus, false); if (ret < 0) { - dev_err(bus->dev, "Program params failed: %d\n", ret); + dev_err(bus->dev, "%s: Program params failed: %d\n", __func__, ret); return ret; } } @@ -1893,7 +1893,8 @@ int sdw_stream_add_master(struct sdw_bus *bus,
m_rt = sdw_master_rt_alloc(bus, stream); if (!m_rt) { - dev_err(bus->dev, "Master runtime alloc failed for stream:%s\n", stream->name); + dev_err(bus->dev, "%s: Master runtime alloc failed for stream:%s\n", + __func__, stream->name); ret = -ENOMEM; goto unlock; } @@ -2012,7 +2013,8 @@ int sdw_stream_add_slave(struct sdw_slave *slave, */ m_rt = sdw_master_rt_alloc(slave->bus, stream); if (!m_rt) { - dev_err(&slave->dev, "Master runtime alloc failed for stream:%s\n", stream->name); + dev_err(&slave->dev, "%s: Master runtime alloc failed for stream:%s\n", + __func__, stream->name); ret = -ENOMEM; goto unlock; }
On 1/13/2023 10:35 AM, Bard Liao wrote:
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
There are a couple of duplicate logs which makes harder than needed to follow the error flows. Add __func__ or make the log unique.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com
drivers/soundwire/stream.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index df3b36670df4..e0eae0b98267 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1389,7 +1389,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream,
ret = do_bank_switch(stream); if (ret < 0) {
dev_err(bus->dev, "Bank switch failed: %d\n", ret);
goto restore_params; }dev_err(bus->dev, "do_bank_switch failed: %d\n", ret);
This one seems bit unrelated to the change and makes error message inconsistent with: https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git/tree/dri... and https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git/tree/dri... which actually brings me to another suggestion, can this error message perhaps be just moved into do_bank_switch() function itself, instead of being duplicated multiple times or alternatively just also prefix all of them with function name?
On 1/13/23 04:22, Amadeusz Sławiński wrote:
On 1/13/2023 10:35 AM, Bard Liao wrote:
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
There are a couple of duplicate logs which makes harder than needed to follow the error flows. Add __func__ or make the log unique.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com
drivers/soundwire/stream.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index df3b36670df4..e0eae0b98267 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1389,7 +1389,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream, ret = do_bank_switch(stream); if (ret < 0) { - dev_err(bus->dev, "Bank switch failed: %d\n", ret); + dev_err(bus->dev, "do_bank_switch failed: %d\n", ret); goto restore_params; }
This one seems bit unrelated to the change and makes error message inconsistent with: https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git/tree/dri... and https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git/tree/dri... which actually brings me to another suggestion, can this error message perhaps be just moved into do_bank_switch() function itself, instead of being duplicated multiple times or alternatively just also prefix all of them with function name?
well, as you correctly pointed out, there are multiple users of 'do_bank_switch' so we don't want to put the message in the function itself.
We could indeed use __func__ instead, that'd be fine.
Looking at the code, there are also inconsistencies with the use of pr_err and dev_err. dev_err(bus->dev is wrong actually, this would use the bus variable assigned in the previous loop, this makes no sense for multi-segment topologies.
Let's drop this patch and revisit all this, hope Vinod can deal with patch 1..4 otherwise we'll resend the set.
Thanks Amadeusz for the feedback.
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
The code should free the message buffer used for data, the message structure used for control and assign the latter to NULL. The last part is missing for multi-link cases, and the order is inconsistent for single-link cases.
Link: https://github.com/thesofproject/linux/issues/4056 Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com --- drivers/soundwire/stream.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index e0eae0b98267..f27bd37b154d 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -723,8 +723,8 @@ static int sdw_bank_switch(struct sdw_bus *bus, int m_rt_count) }
if (!multi_link) { - kfree(wr_msg); kfree(wbuf); + kfree(wr_msg); bus->defer_msg.msg = NULL; bus->params.curr_bank = !bus->params.curr_bank; bus->params.next_bank = !bus->params.next_bank; @@ -769,6 +769,7 @@ static int sdw_ml_sync_bank_switch(struct sdw_bus *bus) if (bus->defer_msg.msg) { kfree(bus->defer_msg.msg->buf); kfree(bus->defer_msg.msg); + bus->defer_msg.msg = NULL; }
return 0; @@ -867,6 +868,7 @@ static int do_bank_switch(struct sdw_stream_runtime *stream) if (bus->defer_msg.msg) { kfree(bus->defer_msg.msg->buf); kfree(bus->defer_msg.msg); + bus->defer_msg.msg = NULL; } }
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
There's no point in passing an argument that is a pointer to a bus member. We can directly get the member and do an indirection when needed.
This is a first step before simplifying the hardware-specific callbacks further.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com --- drivers/soundwire/bus.c | 10 ++++------ drivers/soundwire/bus.h | 3 +-- drivers/soundwire/stream.c | 4 +--- 3 files changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 633d411b64f3..572cc9a9af41 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -225,9 +225,9 @@ static inline int do_transfer(struct sdw_bus *bus, struct sdw_msg *msg) }
static inline int do_transfer_defer(struct sdw_bus *bus, - struct sdw_msg *msg, - struct sdw_defer *defer) + struct sdw_msg *msg) { + struct sdw_defer *defer = &bus->defer_msg; int retry = bus->prop.err_threshold; enum sdw_command_response resp; int ret = 0, i; @@ -335,19 +335,17 @@ EXPORT_SYMBOL(sdw_show_ping_status); * sdw_transfer_defer() - Asynchronously transfer message to a SDW Slave device * @bus: SDW bus * @msg: SDW message to be xfered - * @defer: Defer block for signal completion * * Caller needs to hold the msg_lock lock while calling this */ -int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, - struct sdw_defer *defer) +int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg) { int ret;
if (!bus->ops->xfer_msg_defer) return -ENOTSUPP;
- ret = do_transfer_defer(bus, msg, defer); + ret = do_transfer_defer(bus, msg); if (ret != 0 && ret != -ENODATA) dev_err(bus->dev, "Defer trf on Slave %d failed:%d\n", msg->dev_num, ret); diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 7631ef5e71fb..96927a143796 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -151,8 +151,7 @@ int sdw_configure_dpn_intr(struct sdw_slave *slave, int port, bool enable, int mask);
int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg); -int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, - struct sdw_defer *defer); +int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg);
#define SDW_READ_INTR_CLEAR_RETRY 10
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index f27bd37b154d..e0b0c63fc55c 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -684,8 +684,6 @@ static int sdw_bank_switch(struct sdw_bus *bus, int m_rt_count) if (!wr_msg) return -ENOMEM;
- bus->defer_msg.msg = wr_msg; - wbuf = kzalloc(sizeof(*wbuf), GFP_KERNEL); if (!wbuf) { ret = -ENOMEM; @@ -713,7 +711,7 @@ static int sdw_bank_switch(struct sdw_bus *bus, int m_rt_count) multi_link = bus->multi_link && (m_rt_count >= bus->hw_sync_min_links);
if (multi_link) - ret = sdw_transfer_defer(bus, wr_msg, &bus->defer_msg); + ret = sdw_transfer_defer(bus, wr_msg); else ret = sdw_transfer(bus, wr_msg);
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Copying the bus sdw_defer structure into the Cadence internals leads to using stale pointers and kernel oopses on errors. It's just simpler and safer to use the bus sdw_defer structure directly.
Link: https://github.com/thesofproject/linux/issues/4056 Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com --- drivers/soundwire/bus.c | 2 +- drivers/soundwire/cadence_master.c | 17 ++++++++--------- drivers/soundwire/cadence_master.h | 5 +---- include/linux/soundwire/sdw.h | 3 +-- 4 files changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 572cc9a9af41..fc192d0c61e7 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -237,7 +237,7 @@ static inline int do_transfer_defer(struct sdw_bus *bus, init_completion(&defer->complete);
for (i = 0; i <= retry; i++) { - resp = bus->ops->xfer_msg_defer(bus, msg, defer); + resp = bus->ops->xfer_msg_defer(bus, msg); ret = find_response_code(resp); /* if cmd is ok or ignored return */ if (ret == 0 || ret == -ENODATA) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 521387322145..2365395cb181 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -750,7 +750,7 @@ EXPORT_SYMBOL(cdns_xfer_msg);
enum sdw_command_response cdns_xfer_msg_defer(struct sdw_bus *bus, - struct sdw_msg *msg, struct sdw_defer *defer) + struct sdw_msg *msg) { struct sdw_cdns *cdns = bus_to_cdns(bus); int cmd = 0, ret; @@ -763,9 +763,6 @@ cdns_xfer_msg_defer(struct sdw_bus *bus, if (ret) return SDW_CMD_FAIL_OTHER;
- cdns->defer = defer; - cdns->defer->length = msg->len; - return _cdns_xfer_msg(cdns, msg, cmd, 0, msg->len, true); } EXPORT_SYMBOL(cdns_xfer_msg_defer); @@ -893,13 +890,15 @@ irqreturn_t sdw_cdns_irq(int irq, void *dev_id) return IRQ_NONE;
if (int_status & CDNS_MCP_INT_RX_WL) { + struct sdw_bus *bus = &cdns->bus; + struct sdw_defer *defer = &bus->defer_msg; + cdns_read_response(cdns);
- if (cdns->defer) { - cdns_fill_msg_resp(cdns, cdns->defer->msg, - cdns->defer->length, 0); - complete(&cdns->defer->complete); - cdns->defer = NULL; + if (defer && defer->msg) { + cdns_fill_msg_resp(cdns, defer->msg, + defer->length, 0); + complete(&defer->complete); } else { complete(&cdns->tx_complete); } diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index fa9dc38264a4..53029d22822d 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -109,7 +109,6 @@ struct sdw_cdns_dai_runtime { * @instance: instance number * @response_buf: SoundWire response buffer * @tx_complete: Tx completion - * @defer: Defer pointer * @ports: Data ports * @num_ports: Total number of data ports * @pcm: PCM streams @@ -130,7 +129,6 @@ struct sdw_cdns { u32 response_buf[CDNS_MCP_IP_MAX_CMD_LEN + 2];
struct completion tx_complete; - struct sdw_defer *defer;
struct sdw_cdns_port *ports; int num_ports; @@ -189,8 +187,7 @@ enum sdw_command_response cdns_xfer_msg(struct sdw_bus *bus, struct sdw_msg *msg);
enum sdw_command_response -cdns_xfer_msg_defer(struct sdw_bus *bus, - struct sdw_msg *msg, struct sdw_defer *defer); +cdns_xfer_msg_defer(struct sdw_bus *bus, struct sdw_msg *msg);
u32 cdns_read_ping_status(struct sdw_bus *bus);
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index 3cd2a761911f..fb2bd1524a26 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -852,8 +852,7 @@ struct sdw_master_ops { enum sdw_command_response (*xfer_msg) (struct sdw_bus *bus, struct sdw_msg *msg); enum sdw_command_response (*xfer_msg_defer) - (struct sdw_bus *bus, struct sdw_msg *msg, - struct sdw_defer *defer); + (struct sdw_bus *bus, struct sdw_msg *msg); enum sdw_command_response (*reset_page_addr) (struct sdw_bus *bus, unsigned int dev_num); int (*set_bus_conf)(struct sdw_bus *bus,
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
The message pointer is already stored in the bus->defer structure, not need to pass it as an argument.
Suggested-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com --- drivers/soundwire/bus.c | 2 +- drivers/soundwire/cadence_master.c | 5 +++-- drivers/soundwire/cadence_master.h | 2 +- include/linux/soundwire/sdw.h | 5 +++-- 4 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index fc192d0c61e7..ed94c92bc575 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -237,7 +237,7 @@ static inline int do_transfer_defer(struct sdw_bus *bus, init_completion(&defer->complete);
for (i = 0; i <= retry; i++) { - resp = bus->ops->xfer_msg_defer(bus, msg); + resp = bus->ops->xfer_msg_defer(bus); ret = find_response_code(resp); /* if cmd is ok or ignored return */ if (ret == 0 || ret == -ENODATA) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 2365395cb181..ece0ad89746f 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -749,10 +749,11 @@ cdns_xfer_msg(struct sdw_bus *bus, struct sdw_msg *msg) EXPORT_SYMBOL(cdns_xfer_msg);
enum sdw_command_response -cdns_xfer_msg_defer(struct sdw_bus *bus, - struct sdw_msg *msg) +cdns_xfer_msg_defer(struct sdw_bus *bus) { struct sdw_cdns *cdns = bus_to_cdns(bus); + struct sdw_defer *defer = &bus->defer_msg; + struct sdw_msg *msg = defer->msg; int cmd = 0, ret;
/* for defer only 1 message is supported */ diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index 53029d22822d..63c58b9b1f59 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -187,7 +187,7 @@ enum sdw_command_response cdns_xfer_msg(struct sdw_bus *bus, struct sdw_msg *msg);
enum sdw_command_response -cdns_xfer_msg_defer(struct sdw_bus *bus, struct sdw_msg *msg); +cdns_xfer_msg_defer(struct sdw_bus *bus);
u32 cdns_read_ping_status(struct sdw_bus *bus);
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index fb2bd1524a26..86e320cf27b1 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -837,7 +837,8 @@ struct sdw_defer { * @read_prop: Read Master properties * @override_adr: Override value read from firmware (quirk for buggy firmware) * @xfer_msg: Transfer message callback - * @xfer_msg_defer: Defer version of transfer message callback + * @xfer_msg_defer: Defer version of transfer message callback. The message is handled with the + * bus struct @sdw_defer * @reset_page_addr: Reset the SCP page address registers * @set_bus_conf: Set the bus configuration * @pre_bank_switch: Callback for pre bank switch @@ -852,7 +853,7 @@ struct sdw_master_ops { enum sdw_command_response (*xfer_msg) (struct sdw_bus *bus, struct sdw_msg *msg); enum sdw_command_response (*xfer_msg_defer) - (struct sdw_bus *bus, struct sdw_msg *msg); + (struct sdw_bus *bus); enum sdw_command_response (*reset_page_addr) (struct sdw_bus *bus, unsigned int dev_num); int (*set_bus_conf)(struct sdw_bus *bus,
participants (3)
-
Amadeusz Sławiński
-
Bard Liao
-
Pierre-Louis Bossart