[alsa-devel] [PATCH v2 00/15] soundwire: corrections to ACPI/DisCo/Intel support
Now that we are done with cleanups, we can start fixing the code with actual semantic or functional changes.
This patchset corrects issues with Intel BIOS and hardware properties that prevented a successful init, aligns the code with the MIPI DisCo spec, adds rate-limiting for frequent errors and adds checks on number of links and PDIs.
With all these changes, the hardware can be initialized correctly and modules can be added/removed without issues on WhiskyLake and IceLake.
Parts of this code was initially written by my Intel colleagues Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah, who are either no longer with Intel or no longer involved in SoundWire development. When relevant, I explictly added a note in commit messages to give them credit for their hard work, but I removed their signed-off-by tags to avoid email bounces and avoid spamming them forever with SoundWire patches.
Changes since v2: Feedback from Vinod: 1. improve the SoundWire controller search without magic values 2. split patches as needed Other additions rate-limiting to avoid flooding dmesg logs provide better Slave status on errors more checks on links and PDIs
Pierre-Louis Bossart (15): soundwire: intel: filter SoundWire controller device search soundwire: mipi_disco: fix master/link error soundwire: add port-related definitions soundwire: remove master data port properties soundwire: mipi-disco: remove master_count property for masters soundwire: rename 'freq' fields soundwire: mipi-disco: fix clock stop modes soundwire: clarify comment soundwire: rename/clarify MIPI DisCo properties soundwire: cadence_master: use rate_limited dynamic debug soundwire: cadence_master: log Slave status mask on errors soundwire: cadence_master: check the number of bidir PDIs soundwire: Intel: add log for number of PCM and PDM PDIs soundwire: fix typo in comments soundwire: intel_init: add checks on link numbers
drivers/soundwire/bus.c | 6 +- drivers/soundwire/cadence_master.c | 29 +++++----- drivers/soundwire/intel.c | 17 ++++-- drivers/soundwire/intel.h | 2 +- drivers/soundwire/intel_init.c | 25 ++++++++- drivers/soundwire/mipi_disco.c | 35 ++++++------ drivers/soundwire/stream.c | 8 +-- include/linux/soundwire/sdw.h | 88 +++++++++++++++++++++++------- 8 files changed, 147 insertions(+), 63 deletions(-)
The convention is that the SoundWire controller device is a child of the HDAudio controller. However there can be more than one child exposed in the DSDT table, and the current namespace walk returns the last (incorrect) device.
Intel documentation states that bits 28..31 of the _ADR field represent the link type, with SoundWire assigned the value 4.
Add a filter and terminate early when a valid _ADR is provided, otherwise keep iterating to find the next child.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/intel_init.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c index d3d6b54c5791..771a53a5c033 100644 --- a/drivers/soundwire/intel_init.c +++ b/drivers/soundwire/intel_init.c @@ -14,6 +14,7 @@ #include <linux/soundwire/sdw_intel.h> #include "intel.h"
+#define SDW_LINK_TYPE 4 /* from Intel ACPI documentation */ #define SDW_MAX_LINKS 4 #define SDW_SHIM_LCAP 0x0 #define SDW_SHIM_BASE 0x2C000 @@ -150,6 +151,12 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level, { struct sdw_intel_res *res = cdata; struct acpi_device *adev; + acpi_status status; + u64 adr; + + status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); + if (ACPI_FAILURE(status)) + return AE_OK; /* keep going */
if (acpi_bus_get_device(handle, &adev)) { pr_err("%s: Couldn't find ACPI handle\n", __func__); @@ -157,7 +164,19 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level, }
res->handle = handle; - return AE_OK; + + /* + * On some Intel platforms, multiple children of the HDAS + * device can be found, but only one of them is the SoundWire + * controller. The SNDW device is always exposed with + * Name(_ADR, 0x40000000), with bits 31..28 representing the + * SoundWire link so filter accordingly + */ + if ((adr & GENMASK(31, 28)) >> 28 != SDW_LINK_TYPE) + return AE_OK; /* keep going */ + + /* device found, stop namespace walk */ + return AE_CTRL_TERMINATE; }
/**
The MIPI DisCo specification for SoundWire defines the "mipi-sdw-link-N-subproperties" for slaves and "mipi-sdw-master-N-subproperties" for controllers. This is a mistake that was not identified until now.
Existing Intel DSDT tables use 'link' everywhere, and the MIPI spec will be updated to deprecate "mipi-sdw-master-N-subproperties"
Fix to parse firmware information on existing devices. If we ever see a system with 'master-N-subproperties' I guess we'll have to try both.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/mipi_disco.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c index c1f51d6a23d2..6df68584c963 100644 --- a/drivers/soundwire/mipi_disco.c +++ b/drivers/soundwire/mipi_disco.c @@ -40,7 +40,7 @@ int sdw_master_read_prop(struct sdw_bus *bus)
/* Find master handle */ snprintf(name, sizeof(name), - "mipi-sdw-master-%d-subproperties", bus->link_id); + "mipi-sdw-link-%d-subproperties", bus->link_id);
link = device_get_named_child_node(bus->dev, name); if (!link) {
Somehow previous header files did not include definition for sink/source, flow and grouping.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- include/linux/soundwire/sdw.h | 53 +++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index 35662d9c2c62..69ae680a5a21 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -41,6 +41,31 @@ struct sdw_slave; #define SDW_DAI_ID_RANGE_START 100 #define SDW_DAI_ID_RANGE_END 200
+enum { + SDW_PORT_DIRN_SINK = 0, + SDW_PORT_DIRN_SOURCE, + SDW_PORT_DIRN_MAX, +}; + +/* + * constants for flow control, ports and transport + * + * these are bit masks as devices can have multiple capabilities + */ + +/* + * flow modes for SDW port. These can be isochronous, tx controlled, + * rx controlled or async + */ +#define SDW_PORT_FLOW_MODE_ISOCH 0 +#define SDW_PORT_FLOW_MODE_TX_CNTRL BIT(0) +#define SDW_PORT_FLOW_MODE_RX_CNTRL BIT(1) +#define SDW_PORT_FLOW_MODE_ASYNC GENMASK(1, 0) + +/* sample packaging for block. It can be per port or per channel */ +#define SDW_BLOCK_PACKG_PER_PORT BIT(0) +#define SDW_BLOCK_PACKG_PER_CH BIT(1) + /** * enum sdw_slave_status - Slave status * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus. @@ -76,6 +101,14 @@ enum sdw_command_response { SDW_CMD_FAIL_OTHER = 4, };
+/* block group count enum */ +enum sdw_dpn_grouping { + SDW_BLK_GRP_CNT_1 = 0, + SDW_BLK_GRP_CNT_2 = 1, + SDW_BLK_GRP_CNT_3 = 2, + SDW_BLK_GRP_CNT_4 = 3, +}; + /** * enum sdw_stream_type: data stream type * @@ -100,6 +133,26 @@ enum sdw_data_direction { SDW_DATA_DIR_TX = 1, };
+/** + * enum sdw_port_data_mode: Data Port mode + * + * @SDW_PORT_DATA_MODE_NORMAL: Normal data mode where audio data is received + * and transmitted. + * @SDW_PORT_DATA_MODE_STATIC_1: Simple test mode which uses static value of + * logic 1. The encoding will result in signal transitions at every bitslot + * owned by this Port + * @SDW_PORT_DATA_MODE_STATIC_0: Simple test mode which uses static value of + * logic 0. The encoding will result in no signal transitions + * @SDW_PORT_DATA_MODE_PRBS: Test mode which uses a PRBS generator to produce + * a pseudo random data pattern that is transferred + */ +enum sdw_port_data_mode { + SDW_PORT_DATA_MODE_NORMAL = 0, + SDW_PORT_DATA_MODE_STATIC_1 = 1, + SDW_PORT_DATA_MODE_STATIC_0 = 2, + SDW_PORT_DATA_MODE_PRBS = 3, +}; + /* * SDW properties, defined in MIPI DisCo spec v1.0 */
The SoundWire and DisCo specifications do not define Master data ports or related properties. Data ports are only defined for Slave devices, so remove the unused member in properties.
Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- include/linux/soundwire/sdw.h | 2 -- 1 file changed, 2 deletions(-)
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index 69ae680a5a21..831a370eaedd 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -377,7 +377,6 @@ struct sdw_slave_prop { * @dynamic_frame: Dynamic frame supported * @err_threshold: Number of times that software may retry sending a single * command - * @dpn_prop: Data Port N properties */ struct sdw_master_prop { u32 revision; @@ -393,7 +392,6 @@ struct sdw_master_prop { u32 default_col; bool dynamic_frame; u32 err_threshold; - struct sdw_dpn_prop *dpn_prop; };
int sdw_master_read_prop(struct sdw_bus *bus);
The master_count is only defined for a Controller or a Slave in the MIPI DisCo for SoundWire document.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- include/linux/soundwire/sdw.h | 2 -- 1 file changed, 2 deletions(-)
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index 831a370eaedd..14376d8458c3 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -364,7 +364,6 @@ struct sdw_slave_prop { /** * struct sdw_master_prop - Master properties * @revision: MIPI spec version of the implementation - * @master_count: Number of masters * @clk_stop_mode: Bitmap for Clock Stop modes supported * @max_freq: Maximum Bus clock frequency, in Hz * @num_clk_gears: Number of clock gears supported @@ -380,7 +379,6 @@ struct sdw_slave_prop { */ struct sdw_master_prop { u32 revision; - u32 master_count; enum sdw_clk_stop_mode clk_stop_mode; u32 max_freq; u32 num_clk_gears;
Rename all fields with 'freq' as 'clk_freq' to follow the MIPI specification and avoid confusion between bus clock and audio clocks.
No functionality change.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/bus.c | 4 ++-- drivers/soundwire/intel.c | 11 ++++++----- drivers/soundwire/mipi_disco.c | 23 ++++++++++++----------- drivers/soundwire/stream.c | 2 +- include/linux/soundwire/sdw.h | 12 ++++++------ 5 files changed, 27 insertions(+), 25 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index aac35fc3cf22..96e42df8f458 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -87,7 +87,7 @@ int sdw_add_bus_master(struct sdw_bus *bus)
/* * Initialize clock values based on Master properties. The max - * frequency is read from max_freq property. Current assumption + * frequency is read from max_clk_freq property. Current assumption * is that the bus will start at highest clock frequency when * powered on. * @@ -95,7 +95,7 @@ int sdw_add_bus_master(struct sdw_bus *bus) * to start with bank 0 (Table 40 of Spec) */ prop = &bus->prop; - bus->params.max_dr_freq = prop->max_freq * SDW_DOUBLE_RATE_FACTOR; + bus->params.max_dr_freq = prop->max_clk_freq * SDW_DOUBLE_RATE_FACTOR; bus->params.curr_dr_freq = bus->params.max_dr_freq; bus->params.curr_bank = SDW_BANK0; bus->params.next_bank = SDW_BANK1; diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index 31336b0271b0..4ac141730b13 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -796,13 +796,14 @@ static int intel_prop_read(struct sdw_bus *bus) sdw_master_read_prop(bus);
/* BIOS is not giving some values correctly. So, lets override them */ - bus->prop.num_freq = 1; - bus->prop.freq = devm_kcalloc(bus->dev, bus->prop.num_freq, - sizeof(*bus->prop.freq), GFP_KERNEL); - if (!bus->prop.freq) + bus->prop.num_clk_freq = 1; + bus->prop.clk_freq = devm_kcalloc(bus->dev, bus->prop.num_clk_freq, + sizeof(*bus->prop.clk_freq), + GFP_KERNEL); + if (!bus->prop.clk_freq) return -ENOMEM;
- bus->prop.freq[0] = bus->prop.max_freq; + bus->prop.clk_freq[0] = bus->prop.max_clk_freq; bus->prop.err_threshold = 5;
return 0; diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c index 6df68584c963..b1770af43fa8 100644 --- a/drivers/soundwire/mipi_disco.c +++ b/drivers/soundwire/mipi_disco.c @@ -58,31 +58,32 @@ int sdw_master_read_prop(struct sdw_bus *bus)
fwnode_property_read_u32(link, "mipi-sdw-max-clock-frequency", - &prop->max_freq); + &prop->max_clk_freq);
nval = fwnode_property_read_u32_array(link, "mipi-sdw-clock-frequencies-supported", NULL, 0); if (nval > 0) { - prop->num_freq = nval; - prop->freq = devm_kcalloc(bus->dev, prop->num_freq, - sizeof(*prop->freq), GFP_KERNEL); - if (!prop->freq) + prop->num_clk_freq = nval; + prop->clk_freq = devm_kcalloc(bus->dev, prop->num_clk_freq, + sizeof(*prop->clk_freq), + GFP_KERNEL); + if (!prop->clk_freq) return -ENOMEM;
fwnode_property_read_u32_array(link, "mipi-sdw-clock-frequencies-supported", - prop->freq, prop->num_freq); + prop->clk_freq, prop->num_clk_freq); }
/* * Check the frequencies supported. If FW doesn't provide max * freq, then populate here by checking values. */ - if (!prop->max_freq && prop->freq) { - prop->max_freq = prop->freq[0]; - for (i = 1; i < prop->num_freq; i++) { - if (prop->freq[i] > prop->max_freq) - prop->max_freq = prop->freq[i]; + if (!prop->max_clk_freq && prop->clk_freq) { + prop->max_clk_freq = prop->clk_freq[0]; + for (i = 1; i < prop->num_clk_freq; i++) { + if (prop->clk_freq[i] > prop->max_clk_freq) + prop->max_clk_freq = prop->clk_freq[i]; } }
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index d01060dbee96..89edc897b8eb 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1474,7 +1474,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream) memcpy(¶ms, &bus->params, sizeof(params));
/* TODO: Support Asynchronous mode */ - if ((prop->max_freq % stream->params.rate) != 0) { + if ((prop->max_clk_freq % stream->params.rate) != 0) { dev_err(bus->dev, "Async mode not supported\n"); return -EINVAL; } diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index 14376d8458c3..c6ded0d7a9f2 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -365,11 +365,11 @@ struct sdw_slave_prop { * struct sdw_master_prop - Master properties * @revision: MIPI spec version of the implementation * @clk_stop_mode: Bitmap for Clock Stop modes supported - * @max_freq: Maximum Bus clock frequency, in Hz + * @max_clk_freq: Maximum Bus clock frequency, in Hz * @num_clk_gears: Number of clock gears supported * @clk_gears: Clock gears supported - * @num_freq: Number of clock frequencies supported, in Hz - * @freq: Clock frequencies supported, in Hz + * @num_clk_freq: Number of clock frequencies supported, in Hz + * @clk_freq: Clock frequencies supported, in Hz * @default_frame_rate: Controller default Frame rate, in Hz * @default_row: Number of rows * @default_col: Number of columns @@ -380,11 +380,11 @@ struct sdw_slave_prop { struct sdw_master_prop { u32 revision; enum sdw_clk_stop_mode clk_stop_mode; - u32 max_freq; + u32 max_clk_freq; u32 num_clk_gears; u32 *clk_gears; - u32 num_freq; - u32 *freq; + u32 num_clk_freq; + u32 *clk_freq; u32 default_frame_rate; u32 default_row; u32 default_col;
Fix support for clock_stop_mode0 and 1. The existing code uses a bitmask between enums, one of which being zero. Or-ing with zero is not very useful in general...Fix by or-ing with a BIT dependent on the enum value.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/mipi_disco.c | 4 ++-- include/linux/soundwire/sdw.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c index b1770af43fa8..efb87ee0e7fc 100644 --- a/drivers/soundwire/mipi_disco.c +++ b/drivers/soundwire/mipi_disco.c @@ -50,11 +50,11 @@ int sdw_master_read_prop(struct sdw_bus *bus)
if (fwnode_property_read_bool(link, "mipi-sdw-clock-stop-mode0-supported")) - prop->clk_stop_mode = SDW_CLK_STOP_MODE0; + prop->clk_stop_modes |= BIT(SDW_CLK_STOP_MODE0);
if (fwnode_property_read_bool(link, "mipi-sdw-clock-stop-mode1-supported")) - prop->clk_stop_mode |= SDW_CLK_STOP_MODE1; + prop->clk_stop_modes |= BIT(SDW_CLK_STOP_MODE1);
fwnode_property_read_u32(link, "mipi-sdw-max-clock-frequency", diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index c6ded0d7a9f2..0e3fdd03e589 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -364,7 +364,7 @@ struct sdw_slave_prop { /** * struct sdw_master_prop - Master properties * @revision: MIPI spec version of the implementation - * @clk_stop_mode: Bitmap for Clock Stop modes supported + * @clk_stop_modes: Bitmap, bit N set when clock-stop-modeN supported * @max_clk_freq: Maximum Bus clock frequency, in Hz * @num_clk_gears: Number of clock gears supported * @clk_gears: Clock gears supported @@ -379,7 +379,7 @@ struct sdw_slave_prop { */ struct sdw_master_prop { u32 revision; - enum sdw_clk_stop_mode clk_stop_mode; + u32 clk_stop_modes; u32 max_clk_freq; u32 num_clk_gears; u32 *clk_gears;
The MIPI DisCo spec refers to dynamic frame shape, not to dynamic shape. Clarify.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- include/linux/soundwire/sdw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index 0e3fdd03e589..b7efa819d425 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -373,7 +373,7 @@ struct sdw_slave_prop { * @default_frame_rate: Controller default Frame rate, in Hz * @default_row: Number of rows * @default_col: Number of columns - * @dynamic_frame: Dynamic frame supported + * @dynamic_frame: Dynamic frame shape supported * @err_threshold: Number of times that software may retry sending a single * command */
The existing definitions are ambiguous and possibly misleading.
For DP0, 'flow-control' is only relevant for the BRA protocol and should not be confused with async modes explicitly not supported for DP0, add prefix to follow MIPI DisCo definition
The use of 'device_interrupts' is also questionable. The MIPI SoundWire spec defines Slave-, DP0- and DPN-level implementation-defined interrupts. Using the 'device' prefix in the last two cases is misleading, not only is the term 'device' overloaded but these properties are only valid at the DP0 and DPn levels. Rename to follow the MIPI definitions, no need to be creative here.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/bus.c | 2 +- drivers/soundwire/mipi_disco.c | 6 +++--- drivers/soundwire/stream.c | 6 +++--- include/linux/soundwire/sdw.h | 13 +++++++------ 4 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 96e42df8f458..fe745830a261 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -648,7 +648,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) return 0;
/* Enable DP0 interrupts */ - val = prop->dp0_prop->device_interrupts; + val = prop->dp0_prop->imp_def_interrupts; val |= SDW_DP0_INT_PORT_READY | SDW_DP0_INT_BRA_FAILURE;
ret = sdw_update(slave, SDW_DP0_INTMASK, val, val); diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c index efb87ee0e7fc..79fee1b21ab6 100644 --- a/drivers/soundwire/mipi_disco.c +++ b/drivers/soundwire/mipi_disco.c @@ -150,13 +150,13 @@ static int sdw_slave_read_dp0(struct sdw_slave *slave, dp0->words, dp0->num_words); }
- dp0->flow_controlled = fwnode_property_read_bool(port, + dp0->BRA_flow_controlled = fwnode_property_read_bool(port, "mipi-sdw-bra-flow-controlled");
dp0->simple_ch_prep_sm = fwnode_property_read_bool(port, "mipi-sdw-simplified-channel-prepare-sm");
- dp0->device_interrupts = fwnode_property_read_bool(port, + dp0->imp_def_interrupts = fwnode_property_read_bool(port, "mipi-sdw-imp-def-dp0-interrupts-supported");
return 0; @@ -225,7 +225,7 @@ static int sdw_slave_read_dpn(struct sdw_slave *slave,
fwnode_property_read_u32(node, "mipi-sdw-imp-def-dpn-interrupts-supported", - &dpn[i].device_interrupts); + &dpn[i].imp_def_interrupts);
fwnode_property_read_u32(node, "mipi-sdw-min-channel-number", &dpn[i].min_ch); diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 89edc897b8eb..ce9cb7fa4724 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -439,7 +439,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
prep_ch.bank = bus->params.next_bank;
- if (dpn_prop->device_interrupts || !dpn_prop->simple_ch_prep_sm) + if (dpn_prop->imp_def_interrupts || !dpn_prop->simple_ch_prep_sm) intr = true;
/* @@ -449,7 +449,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus, */ if (prep && intr) { ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep, - dpn_prop->device_interrupts); + dpn_prop->imp_def_interrupts); if (ret < 0) return ret; } @@ -493,7 +493,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus, /* Disable interrupt after Port de-prepare */ if (!prep && intr) ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep, - dpn_prop->device_interrupts); + dpn_prop->imp_def_interrupts);
return ret; } diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index b7efa819d425..bea46bd8b6ce 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -206,10 +206,11 @@ enum sdw_clk_stop_mode { * (inclusive) * @num_words: number of wordlengths supported * @words: wordlengths supported - * @flow_controlled: Slave implementation results in an OK_NotReady + * @BRA_flow_controlled: Slave implementation results in an OK_NotReady * response * @simple_ch_prep_sm: If channel prepare sequence is required - * @device_interrupts: If implementation-defined interrupts are supported + * @imp_def_interrupts: If set, each bit corresponds to support for + * implementation-defined interrupts * * The wordlengths are specified by Spec as max, min AND number of * discrete values, implementation can define based on the wordlengths they @@ -220,9 +221,9 @@ struct sdw_dp0_prop { u32 min_word; u32 num_words; u32 *words; - bool flow_controlled; + bool BRA_flow_controlled; bool simple_ch_prep_sm; - bool device_interrupts; + bool imp_def_interrupts; };
/** @@ -272,7 +273,7 @@ struct sdw_dpn_audio_mode { * @simple_ch_prep_sm: If the port supports simplified channel prepare state * machine * @ch_prep_timeout: Port-specific timeout value, in milliseconds - * @device_interrupts: If set, each bit corresponds to support for + * @imp_def_interrupts: If set, each bit corresponds to support for * implementation-defined interrupts * @max_ch: Maximum channels supported * @min_ch: Minimum channels supported @@ -297,7 +298,7 @@ struct sdw_dpn_prop { u32 max_grouping; bool simple_ch_prep_sm; u32 ch_prep_timeout; - u32 device_interrupts; + u32 imp_def_interrupts; u32 max_ch; u32 min_ch; u32 num_ch;
When commands start failing, e.g. due to a bad electrical connection or bus conflicts, the dmesg log is flooded. This should not happen for production devices but it's quite frequent when bringing-up a new platform.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/cadence_master.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 682789bb8ab3..6f4184f5256c 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -236,19 +236,19 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns, for (i = 0; i < count; i++) { if (!(cdns->response_buf[i] & CDNS_MCP_RESP_ACK)) { no_ack = 1; - dev_dbg(cdns->dev, "Msg Ack not received\n"); + dev_dbg_ratelimited(cdns->dev, "Msg Ack not received\n"); if (cdns->response_buf[i] & CDNS_MCP_RESP_NACK) { nack = 1; - dev_err(cdns->dev, "Msg NACK received\n"); + dev_err_ratelimited(cdns->dev, "Msg NACK received\n"); } } }
if (nack) { - dev_err(cdns->dev, "Msg NACKed for Slave %d\n", msg->dev_num); + dev_err_ratelimited(cdns->dev, "Msg NACKed for Slave %d\n", msg->dev_num); return SDW_CMD_FAIL; } else if (no_ack) { - dev_dbg(cdns->dev, "Msg ignored for Slave %d\n", msg->dev_num); + dev_dbg_ratelimited(cdns->dev, "Msg ignored for Slave %d\n", msg->dev_num); return SDW_CMD_IGNORED; }
@@ -356,12 +356,12 @@ cdns_program_scp_addr(struct sdw_cdns *cdns, struct sdw_msg *msg)
/* For NACK, NO ack, don't return err if we are in Broadcast mode */ if (nack) { - dev_err(cdns->dev, - "SCP_addrpage NACKed for Slave %d\n", msg->dev_num); + dev_err_ratelimited(cdns->dev, + "SCP_addrpage NACKed for Slave %d\n", msg->dev_num); return SDW_CMD_FAIL; } else if (no_ack) { - dev_dbg(cdns->dev, - "SCP_addrpage ignored for Slave %d\n", msg->dev_num); + dev_dbg_ratelimited(cdns->dev, + "SCP_addrpage ignored for Slave %d\n", msg->dev_num); return SDW_CMD_IGNORED; }
@@ -524,9 +524,9 @@ static int cdns_update_slave_status(struct sdw_cdns *cdns,
/* first check if Slave reported multiple status */ if (set_status > 1) { - dev_warn(cdns->dev, - "Slave reported multiple Status: %d\n", - status[i]); + dev_warn_ratelimited(cdns->dev, + "Slave reported multiple Status: %d\n", + status[i]); /* * TODO: we need to reread the status here by * issuing a PING cmd @@ -612,7 +612,7 @@ irqreturn_t sdw_cdns_thread(int irq, void *dev_id) struct sdw_cdns *cdns = dev_id; u32 slave0, slave1;
- dev_dbg(cdns->dev, "Slave status change\n"); + dev_dbg_ratelimited(cdns->dev, "Slave status change\n");
slave0 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT0); slave1 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT1);
The Slave status mask exposes 4 sticky bits. When the device loses sync, the IP will report two status but the log will only show that the device lost sync. The status mask has all the information needed so let's report it instead.
Also change the resolution of the mask, using 64 bits is not needed when you need 4.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/cadence_master.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 6f4184f5256c..a505d74ab461 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -486,7 +486,8 @@ static int cdns_update_slave_status(struct sdw_cdns *cdns, { enum sdw_slave_status status[SDW_MAX_DEVICES + 1]; bool is_slave = false; - u64 slave, mask; + u64 slave; + u32 mask; int i, set_status;
/* combine the two status */ @@ -526,7 +527,7 @@ static int cdns_update_slave_status(struct sdw_cdns *cdns, if (set_status > 1) { dev_warn_ratelimited(cdns->dev, "Slave reported multiple Status: %d\n", - status[i]); + mask); /* * TODO: we need to reread the status here by * issuing a PING cmd
There is an assumption that the first two PDIs are reserved for Bulk, so we need to make sure the number of bidir PDIs is indeed larger than two. If the configuration provided is incorrect, this could lead to allocating a huge amount of memory.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/cadence_master.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index a505d74ab461..6a5fa70a8c69 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -717,6 +717,8 @@ int sdw_cdns_pdi_init(struct sdw_cdns *cdns, stream = &cdns->pcm;
/* First two PDIs are reserved for bulk transfers */ + if (stream->num_bd < CDNS_PCM_PDI_OFFSET) + return -EINVAL; stream->num_bd -= CDNS_PCM_PDI_OFFSET; offset = CDNS_PCM_PDI_OFFSET;
This information will be reflected in debugfs but it's easier to see as a dmesg log.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/intel.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index 4ac141730b13..92be6ad84e8d 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -263,6 +263,9 @@ static void intel_pdi_init(struct sdw_intel *sdw, config->pcm_out = (pcm_cap & SDW_SHIM_PCMSCAP_OSS) >> SDW_REG_SHIFT(SDW_SHIM_PCMSCAP_OSS);
+ dev_dbg(sdw->cdns.dev, "PCM cap bd:%d in:%d out:%d\n", + config->pcm_bd, config->pcm_in, config->pcm_out); + /* PDM Stream Capability */ pdm_cap = intel_readw(shim, SDW_SHIM_PDMSCAP(link_id));
@@ -272,6 +275,9 @@ static void intel_pdi_init(struct sdw_intel *sdw, SDW_REG_SHIFT(SDW_SHIM_PDMSCAP_ISS); config->pdm_out = (pdm_cap & SDW_SHIM_PDMSCAP_OSS) >> SDW_REG_SHIFT(SDW_SHIM_PDMSCAP_OSS); + + dev_dbg(sdw->cdns.dev, "PDM cap bd:%d in:%d out:%d\n", + config->pdm_bd, config->pdm_in, config->pdm_out); }
static int
Copy/paste of sdw_intel_res
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/intel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h index 71050e5f643d..d923b6262330 100644 --- a/drivers/soundwire/intel.h +++ b/drivers/soundwire/intel.h @@ -5,7 +5,7 @@ #define __SDW_INTEL_LOCAL_H
/** - * struct sdw_intel_res - Soundwire link resources + * struct sdw_intel_link_res - Soundwire link resources * @registers: Link IO registers base * @shim: Audio shim pointer * @alh: ALH (Audio Link Hub) pointer
Add mask to correctly read the SoundWire SHIM LCAP register. Only bits 2..0 are meaningful, the rest is about link synchronization and stream channel mapping. Without this mask, the hardware information would always be larger than whatever the BIOS would report.
Also trap the case with zero links.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/intel_init.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c index 771a53a5c033..70637a0383d2 100644 --- a/drivers/soundwire/intel_init.c +++ b/drivers/soundwire/intel_init.c @@ -81,6 +81,7 @@ static struct sdw_intel_ctx
/* Check SNDWLCAP.LCOUNT */ caps = ioread32(res->mmio_base + SDW_SHIM_BASE + SDW_SHIM_LCAP); + caps &= GENMASK(2, 0);
/* Check HW supported vs property value and use min of two */ count = min_t(u8, caps, count); @@ -90,6 +91,9 @@ static struct sdw_intel_ctx dev_err(&adev->dev, "Link count %d exceeds max %d\n", count, SDW_MAX_LINKS); return NULL; + } else if (!count) { + dev_warn(&adev->dev, "No SoundWire links detected\n"); + return NULL; }
dev_dbg(&adev->dev, "Creating %d SDW Link devices\n", count);
On 22-05-19, 14:47, Pierre-Louis Bossart wrote:
Now that we are done with cleanups, we can start fixing the code with actual semantic or functional changes.
This patchset corrects issues with Intel BIOS and hardware properties that prevented a successful init, aligns the code with the MIPI DisCo spec, adds rate-limiting for frequent errors and adds checks on number of links and PDIs.
With all these changes, the hardware can be initialized correctly and modules can be added/removed without issues on WhiskyLake and IceLake.
Parts of this code was initially written by my Intel colleagues Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah, who are either no longer with Intel or no longer involved in SoundWire development. When relevant, I explictly added a note in commit messages to give them credit for their hard work, but I removed their signed-off-by tags to avoid email bounces and avoid spamming them forever with SoundWire patches.
Applied all, thanks
participants (2)
-
Pierre-Louis Bossart -
Vinod Koul