The TLB entries in Trident driver are represented in little-endian, hence they should be declared as __le32.

This patch fixes the sparse warnings like: sound/pci/trident/trident_memory.c:226:17: warning: incorrect type in assignment (different base types)

Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/trident/trident.h | 2 +- sound/pci/trident/trident_main.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/trident/trident.h b/sound/pci/trident/trident.h index 9624e5937719..2d62c1921255 100644 --- a/sound/pci/trident/trident.h +++ b/sound/pci/trident/trident.h @@ -264,7 +264,7 @@ struct snd_trident_memblk_arg { };

struct snd_trident_tlb { - unsigned int * entries; /* 16k-aligned TLB table */ + __le32 *entries; /* 16k-aligned TLB table */ dma_addr_t entries_dmaaddr; /* 16k-aligned PCI address to TLB table */ unsigned long * shadow_entries; /* shadow entries with virtual addresses */ struct snd_dma_buffer buffer; diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c index 49c64fae3466..5523e193d556 100644 --- a/sound/pci/trident/trident_main.c +++ b/sound/pci/trident/trident_main.c @@ -3359,7 +3359,7 @@ static int snd_trident_tlb_alloc(struct snd_trident *trident) dev_err(trident->card->dev, "unable to allocate TLB buffer\n"); return -ENOMEM; } - trident->tlb.entries = (unsigned int*)ALIGN((unsigned long)trident->tlb.buffer.area, SNDRV_TRIDENT_MAX_PAGES * 4); + trident->tlb.entries = (__le32 *)ALIGN((unsigned long)trident->tlb.buffer.area, SNDRV_TRIDENT_MAX_PAGES * 4); trident->tlb.entries_dmaaddr = ALIGN(trident->tlb.buffer.addr, SNDRV_TRIDENT_MAX_PAGES * 4); /* allocate shadow TLB page table (virtual addresses) */ trident->tlb.shadow_entries =

The SG descriptor of Riptide contains the little-endian values, hence we need to define with __le32 properly. This fixes sparse warnings like: sound/pci/riptide/riptide.c:1112:40: warning: cast to restricted __le32

Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/riptide/riptide.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index 9d2b2ef15c6b..23017e3bc76c 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -470,10 +470,10 @@ struct snd_riptide { };

struct sgd { /* scatter gather desriptor */ - u32 dwNextLink; - u32 dwSegPtrPhys; - u32 dwSegLen; - u32 dwStat_Ctl; + __le32 dwNextLink; + __le32 dwSegPtrPhys; + __le32 dwSegLen; + __le32 dwStat_Ctl; };

struct pcmhw { /* pcm descriptor */

The BDL entries in lola driver are little-endian while we code them as u32. This leads to sparse warnings like: sound/pci/lola/lola.c:105:40: warning: incorrect type in assignment (different base types) sound/pci/lola/lola.c:105:40: expected unsigned int [unsigned] [usertype] <noident> sound/pci/lola/lola.c:105:40: got restricted __le32 [usertype] <noident>

This patch fixes the declarations to the proper __le32 type.

Also, there was a typo in the original code, where __user was used that was intended as __iomem. This was caused also by sparse: sound/pci/lola/lola_mixer.c:132:27: warning: incorrect type in assignment (different address spaces) Fixed in this patch as well.

Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/lola/lola.c | 4 ++-- sound/pci/lola/lola.h | 4 ++-- sound/pci/lola/lola_pcm.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/pci/lola/lola.c b/sound/pci/lola/lola.c index 9ff600084973..254f24366892 100644 --- a/sound/pci/lola/lola.c +++ b/sound/pci/lola/lola.c @@ -369,9 +369,9 @@ static int setup_corb_rirb(struct lola *chip) return err;

chip->corb.addr = chip->rb.addr; - chip->corb.buf = (u32 *)chip->rb.area; + chip->corb.buf = (__le32 *)chip->rb.area; chip->rirb.addr = chip->rb.addr + 2048; - chip->rirb.buf = (u32 *)(chip->rb.area + 2048); + chip->rirb.buf = (__le32 *)(chip->rb.area + 2048);

/* disable ringbuffer DMAs */ lola_writeb(chip, BAR0, RIRBCTL, 0); diff --git a/sound/pci/lola/lola.h b/sound/pci/lola/lola.h index f0b100059efd..bd852fed8bb6 100644 --- a/sound/pci/lola/lola.h +++ b/sound/pci/lola/lola.h @@ -220,7 +220,7 @@ struct lola_bar {

/* CORB/RIRB */ struct lola_rb { - u32 *buf; /* CORB/RIRB buffer, 8 byte per each entry */ + __le32 *buf; /* CORB/RIRB buffer, 8 byte per each entry */ dma_addr_t addr; /* physical address of CORB/RIRB buffer */ unsigned short rp, wp; /* read/write pointers */ int cmds; /* number of pending requests */ @@ -275,7 +275,7 @@ struct lola_mixer_array { struct lola_mixer_widget { unsigned int nid; unsigned int caps; - struct lola_mixer_array __user *array; + struct lola_mixer_array __iomem *array; struct lola_mixer_array *array_saved; unsigned int src_stream_outs; unsigned int src_phys_ins; diff --git a/sound/pci/lola/lola_pcm.c b/sound/pci/lola/lola_pcm.c index 310b26a756c9..e70276c3ea20 100644 --- a/sound/pci/lola/lola_pcm.c +++ b/sound/pci/lola/lola_pcm.c @@ -316,10 +316,10 @@ static int lola_pcm_hw_free(struct snd_pcm_substream *substream) * set up a BDL entry */ static int setup_bdle(struct snd_pcm_substream *substream, - struct lola_stream *str, u32 **bdlp, + struct lola_stream *str, __le32 **bdlp, int ofs, int size) { - u32 *bdl = *bdlp; + __le32 *bdl = *bdlp;

while (size > 0) { dma_addr_t addr; @@ -355,14 +355,14 @@ static int lola_setup_periods(struct lola *chip, struct lola_pcm *pcm, struct snd_pcm_substream *substream, struct lola_stream *str) { - u32 *bdl; + __le32 *bdl; int i, ofs, periods, period_bytes;

period_bytes = str->period_bytes; periods = str->bufsize / period_bytes;

/* program the initial BDL entries */ - bdl = (u32 *)(pcm->bdl.area + LOLA_BDL_ENTRY_SIZE * str->index); + bdl = (__le32 *)(pcm->bdl.area + LOLA_BDL_ENTRY_SIZE * str->index); ofs = 0; str->frags = 0; for (i = 0; i < periods; i++) {

The BD address tables in intel8x0m driver are in little-endian, hence they should be represented as __le32 instead u32.

Spotted by sparse, warnings like: sound/pci/intel8x0m.c:406:40: warning: incorrect type in assignment (different base types)

Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/intel8x0m.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c index 3a4769a97d29..943a726b1c1b 100644 --- a/sound/pci/intel8x0m.c +++ b/sound/pci/intel8x0m.c @@ -168,7 +168,7 @@ enum { ALID_MDMIN, ALID_MDMOUT, ALID_MDMLAST = ALID_MDMOUT }; struct ichdev { unsigned int ichd; /* ich device number */ unsigned long reg_offset; /* offset to bmaddr */ - u32 *bdbar; /* CPU address (32bit) */ + __le32 *bdbar; /* CPU address (32bit) */ unsigned int bdbar_addr; /* PCI bus address (32bit) */ struct snd_pcm_substream *substream; unsigned int physbuf; /* physical address (32bit) */ @@ -395,7 +395,7 @@ static unsigned short snd_intel8x0m_codec_read(struct snd_ac97 *ac97, static void snd_intel8x0m_setup_periods(struct intel8x0m *chip, struct ichdev *ichdev) { int idx; - u32 *bdbar = ichdev->bdbar; + __le32 *bdbar = ichdev->bdbar; unsigned long port = ichdev->reg_offset;

iputdword(chip, port + ICH_REG_OFF_BDBAR, ichdev->bdbar_addr); @@ -1217,7 +1217,7 @@ static int snd_intel8x0m_create(struct snd_card *card, int_sta_masks = 0; for (i = 0; i < chip->bdbars_count; i++) { ichdev = &chip->ichd[i]; - ichdev->bdbar = ((u32 *)chip->bdbars.area) + (i * ICH_MAX_FRAGS * 2); + ichdev->bdbar = ((__le32 *)chip->bdbars.area) + (i * ICH_MAX_FRAGS * 2); ichdev->bdbar_addr = chip->bdbars.addr + (i * sizeof(u32) * ICH_MAX_FRAGS * 2); int_sta_masks |= ichdev->int_sta_mask; }

Many data fields defined in echoaudio drivers are in little-endian, hence they should be defined with __le16 or __le32. This makes it easier to catch the forgotten conversions.

Spotted by sparse, a warning like: sound/pci/echoaudio/echoaudio_dsp.c:990:36: warning: incorrect type in assignment (different base types)

Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/echoaudio/echoaudio.h | 2 +- sound/pci/echoaudio/echoaudio_3g.c | 14 ++++---- sound/pci/echoaudio/echoaudio_dsp.c | 6 ++-- sound/pci/echoaudio/echoaudio_dsp.h | 50 ++++++++++++++--------------- sound/pci/echoaudio/echoaudio_gml.c | 8 +++-- 5 files changed, 42 insertions(+), 38 deletions(-)

diff --git a/sound/pci/echoaudio/echoaudio.h b/sound/pci/echoaudio/echoaudio.h index 44b390a667d5..be4d0489394a 100644 --- a/sound/pci/echoaudio/echoaudio.h +++ b/sound/pci/echoaudio/echoaudio.h @@ -294,7 +294,7 @@

struct audiopipe { - volatile u32 *dma_counter; /* Commpage register that contains + volatile __le32 *dma_counter; /* Commpage register that contains * the current dma position * (lower 32 bits only) */ diff --git a/sound/pci/echoaudio/echoaudio_3g.c b/sound/pci/echoaudio/echoaudio_3g.c index 22c786b8a889..cc3c79387194 100644 --- a/sound/pci/echoaudio/echoaudio_3g.c +++ b/sound/pci/echoaudio/echoaudio_3g.c @@ -73,19 +73,21 @@ register. write_control_reg sends the new control register value to the DSP. */ static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq, char force) { + __le32 ctl_reg, frq_reg; + if (wait_handshake(chip)) return -EIO;

dev_dbg(chip->card->dev, "WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq);

- ctl = cpu_to_le32(ctl); - frq = cpu_to_le32(frq); + ctl_reg = cpu_to_le32(ctl); + frq_reg = cpu_to_le32(frq);

- if (ctl != chip->comm_page->control_register || - frq != chip->comm_page->e3g_frq_register || force) { - chip->comm_page->e3g_frq_register = frq; - chip->comm_page->control_register = ctl; + if (ctl_reg != chip->comm_page->control_register || + frq_reg != chip->comm_page->e3g_frq_register || force) { + chip->comm_page->e3g_frq_register = frq_reg; + chip->comm_page->control_register = ctl_reg; clear_handshake(chip); return send_vector(chip, DSP_VC_WRITE_CONTROL_REG); } diff --git a/sound/pci/echoaudio/echoaudio_dsp.c b/sound/pci/echoaudio/echoaudio_dsp.c index 15aae2fad8e4..b181752b8481 100644 --- a/sound/pci/echoaudio/echoaudio_dsp.c +++ b/sound/pci/echoaudio/echoaudio_dsp.c @@ -679,7 +679,7 @@ static int restore_dsp_rettings(struct echoaudio *chip) /* Gina20/Darla20 only. Should be harmless for other cards. */ chip->comm_page->gd_clock_state = GD_CLOCK_UNDEF; chip->comm_page->gd_spdif_status = GD_SPDIF_STATUS_UNDEF; - chip->comm_page->handshake = 0xffffffff; + chip->comm_page->handshake = cpu_to_le32(0xffffffff);

/* Restore output busses */ for (i = 0; i < num_busses_out(chip); i++) { @@ -989,7 +989,7 @@ static int init_dsp_comm_page(struct echoaudio *chip) /* Init the comm page */ chip->comm_page->comm_size = cpu_to_le32(sizeof(struct comm_page)); - chip->comm_page->handshake = 0xffffffff; + chip->comm_page->handshake = cpu_to_le32(0xffffffff); chip->comm_page->midi_out_free_count = cpu_to_le32(DSP_MIDI_OUT_FIFO_SIZE); chip->comm_page->sample_rate = cpu_to_le32(44100); @@ -1087,7 +1087,7 @@ static int allocate_pipes(struct echoaudio *chip, struct audiopipe *pipe, /* The counter register is where the DSP writes the 32 bit DMA position for a pipe. The DSP is constantly updating this value as it moves data. The DMA counter is in units of bytes, not samples. */ - pipe->dma_counter = &chip->comm_page->position[pipe_index]; + pipe->dma_counter = (__le32 *)&chip->comm_page->position[pipe_index]; *pipe->dma_counter = 0; return pipe_index; } diff --git a/sound/pci/echoaudio/echoaudio_dsp.h b/sound/pci/echoaudio/echoaudio_dsp.h index cb7d75a0a503..aa9129519795 100644 --- a/sound/pci/echoaudio/echoaudio_dsp.h +++ b/sound/pci/echoaudio/echoaudio_dsp.h @@ -627,8 +627,8 @@ sg_entry struct is read by the DSP, so all values must be little-endian. */ #define MAX_SGLIST_ENTRIES 512

struct sg_entry { - u32 addr; - u32 size; + __le32 addr; + __le32 size; };

@@ -643,18 +643,18 @@ struct sg_entry { ****************************************************************************/

struct comm_page { /* Base Length*/ - u32 comm_size; /* size of this object 0x000 4 */ - u32 flags; /* See Appendix A below 0x004 4 */ - u32 unused; /* Unused entry 0x008 4 */ - u32 sample_rate; /* Card sample rate in Hz 0x00c 4 */ - u32 handshake; /* DSP command handshake 0x010 4 */ - u32 cmd_start; /* Chs. to start mask 0x014 4 */ - u32 cmd_stop; /* Chs. to stop mask 0x018 4 */ - u32 cmd_reset; /* Chs. to reset mask 0x01c 4 */ - u16 audio_format[DSP_MAXPIPES]; /* Chs. audio format 0x020 32*2 */ + __le32 comm_size; /* size of this object 0x000 4 */ + __le32 flags; /* See Appendix A below 0x004 4 */ + __le32 unused; /* Unused entry 0x008 4 */ + __le32 sample_rate; /* Card sample rate in Hz 0x00c 4 */ + __le32 handshake; /* DSP command handshake 0x010 4 */ + __le32 cmd_start; /* Chs. to start mask 0x014 4 */ + __le32 cmd_stop; /* Chs. to stop mask 0x018 4 */ + __le32 cmd_reset; /* Chs. to reset mask 0x01c 4 */ + __le16 audio_format[DSP_MAXPIPES]; /* Chs. audio format 0x020 32*2 */ struct sg_entry sglist_addr[DSP_MAXPIPES]; /* Chs. Physical sglist addrs 0x060 32*8 */ - u32 position[DSP_MAXPIPES]; + __le32 position[DSP_MAXPIPES]; /* Positions for ea. ch. 0x160 32*4 */ s8 vu_meter[DSP_MAXPIPES]; /* VU meters 0x1e0 32*1 */ @@ -666,28 +666,28 @@ struct comm_page { /* Base Length*/ /* Input gain 0x230 16*1 */ s8 monitors[MONITOR_ARRAY_SIZE]; /* Monitor map 0x240 0x180 */ - u32 play_coeff[MAX_PLAY_TAPS]; + __le32 play_coeff[MAX_PLAY_TAPS]; /* Gina/Darla play filters - obsolete 0x3c0 168*4 */ - u32 rec_coeff[MAX_REC_TAPS]; + __le32 rec_coeff[MAX_REC_TAPS]; /* Gina/Darla record filters - obsolete 0x660 192*4 */ - u16 midi_input[MIDI_IN_BUFFER_SIZE]; + __le16 midi_input[MIDI_IN_BUFFER_SIZE]; /* MIDI input data transfer buffer 0x960 256*2 */ u8 gd_clock_state; /* Chg Gina/Darla clock state 0xb60 1 */ u8 gd_spdif_status; /* Chg. Gina/Darla S/PDIF state 0xb61 1 */ u8 gd_resampler_state; /* Should always be 3 0xb62 1 */ u8 filler2; /* 0xb63 1 */ - u32 nominal_level_mask; /* -10 level enable mask 0xb64 4 */ - u16 input_clock; /* Chg. Input clock state 0xb68 2 */ - u16 output_clock; /* Chg. Output clock state 0xb6a 2 */ - u32 status_clocks; /* Current Input clock state 0xb6c 4 */ - u32 ext_box_status; /* External box status 0xb70 4 */ - u32 cmd_add_buffer; /* Pipes to add (obsolete) 0xb74 4 */ - u32 midi_out_free_count; + __le32 nominal_level_mask; /* -10 level enable mask 0xb64 4 */ + __le16 input_clock; /* Chg. Input clock state 0xb68 2 */ + __le16 output_clock; /* Chg. Output clock state 0xb6a 2 */ + __le32 status_clocks; /* Current Input clock state 0xb6c 4 */ + __le32 ext_box_status; /* External box status 0xb70 4 */ + __le32 cmd_add_buffer; /* Pipes to add (obsolete) 0xb74 4 */ + __le32 midi_out_free_count; /* # of bytes free in MIDI output FIFO 0xb78 4 */ - u32 unused2; /* Cyclic pipes 0xb7c 4 */ - u32 control_register; + __le32 unused2; /* Cyclic pipes 0xb7c 4 */ + __le32 control_register; /* Mona, Gina24, Layla24, 3G ctrl reg 0xb80 4 */ - u32 e3g_frq_register; /* 3G frequency register 0xb84 4 */ + __le32 e3g_frq_register; /* 3G frequency register 0xb84 4 */ u8 filler[24]; /* filler 0xb88 24*1 */ s8 vmixer[VMIXER_ARRAY_SIZE]; /* Vmixer levels 0xba0 64*1 */ diff --git a/sound/pci/echoaudio/echoaudio_gml.c b/sound/pci/echoaudio/echoaudio_gml.c index 834b39e97db7..eea6fe530ab4 100644 --- a/sound/pci/echoaudio/echoaudio_gml.c +++ b/sound/pci/echoaudio/echoaudio_gml.c @@ -63,6 +63,8 @@ the control register. write_control_reg sends the new control register value to the DSP. */ static int write_control_reg(struct echoaudio *chip, u32 value, char force) { + __le32 reg_value; + /* Handle the digital input auto-mute */ if (chip->digital_in_automute) value |= GML_DIGITAL_IN_AUTO_MUTE; @@ -72,11 +74,11 @@ static int write_control_reg(struct echoaudio *chip, u32 value, char force) dev_dbg(chip->card->dev, "write_control_reg: 0x%x\n", value);

/* Write the control register */ - value = cpu_to_le32(value); - if (value != chip->comm_page->control_register || force) { + reg_value = cpu_to_le32(value); + if (reg_value != chip->comm_page->control_register || force) { if (wait_handshake(chip)) return -EIO; - chip->comm_page->control_register = value; + chip->comm_page->control_register = reg_value; clear_handshake(chip); return send_vector(chip, DSP_VC_WRITE_CONTROL_REG); }

The DMA address table in atiixp driver is in little-endian, hence we should define it with __le32 properly.

Spotted by sparse, a warning like: sound/pci/atiixp.c:393:28: warning: incorrect type in assignment (different base types)

Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/atiixp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index 7ae63d452bba..a1e4944dcfe8 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -207,10 +207,10 @@ struct atiixp; */

struct atiixp_dma_desc { - u32 addr; /* DMA buffer address */ + __le32 addr; /* DMA buffer address */ u16 status; /* status bits */ u16 size; /* size of the packet in dwords */ - u32 next; /* address of the next packet descriptor */ + __le32 next; /* address of the next packet descriptor */ };

/*

The data types defined in SB CSP driver code are all in little-endian, hence the proper type like __le32 should be used.

Spotted by sparse, a warning like: sound/isa/sb/sb16_csp.c:330:14: warning: cast to restricted __le32

Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/isa/sb/sb16_csp.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c index 2210e7c72787..b9d67a7065cd 100644 --- a/sound/isa/sb/sb16_csp.c +++ b/sound/isa/sb/sb16_csp.c @@ -60,18 +60,18 @@ MODULE_FIRMWARE("sb16/ima_adpcm_capture.csp"); * RIFF data format */ struct riff_header { - __u32 name; - __u32 len; + __le32 name; + __le32 len; };

struct desc_header { struct riff_header info; - __u16 func_nr; - __u16 VOC_type; - __u16 flags_play_rec; - __u16 flags_16bit_8bit; - __u16 flags_stereo_mono; - __u16 flags_rates; + __le16 func_nr; + __le16 VOC_type; + __le16 flags_play_rec; + __le16 flags_16bit_8bit; + __le16 flags_stereo_mono; + __le16 flags_rates; };

/* @@ -314,7 +314,7 @@ static int snd_sb_csp_riff_load(struct snd_sb_csp * p, unsigned short func_nr = 0;

struct riff_header file_h, item_h, code_h; - __u32 item_type; + __le32 item_type; struct desc_header funcdesc_h;

unsigned long flags; @@ -326,7 +326,7 @@ static int snd_sb_csp_riff_load(struct snd_sb_csp * p,

if (copy_from_user(&file_h, data_ptr, sizeof(file_h))) return -EFAULT; - if ((file_h.name != RIFF_HEADER) || + if ((le32_to_cpu(file_h.name) != RIFF_HEADER) || (le32_to_cpu(file_h.len) >= SNDRV_SB_CSP_MAX_MICROCODE_FILE_SIZE - sizeof(file_h))) { snd_printd("%s: Invalid RIFF header\n", __func__); return -EINVAL; @@ -336,7 +336,7 @@ static int snd_sb_csp_riff_load(struct snd_sb_csp * p,

if (copy_from_user(&item_type, data_ptr, sizeof(item_type))) return -EFAULT; - if (item_type != CSP__HEADER) { + if (le32_to_cpu(item_type) != CSP__HEADER) { snd_printd("%s: Invalid RIFF file type\n", __func__); return -EINVAL; } @@ -346,12 +346,12 @@ static int snd_sb_csp_riff_load(struct snd_sb_csp * p, if (copy_from_user(&item_h, data_ptr, sizeof(item_h))) return -EFAULT; data_ptr += sizeof(item_h); - if (item_h.name != LIST_HEADER) + if (le32_to_cpu(item_h.name) != LIST_HEADER) continue;

if (copy_from_user(&item_type, data_ptr, sizeof(item_type))) return -EFAULT; - switch (item_type) { + switch (le32_to_cpu(item_type)) { case FUNC_HEADER: if (copy_from_user(&funcdesc_h, data_ptr + sizeof(item_type), sizeof(funcdesc_h))) return -EFAULT; @@ -378,7 +378,7 @@ static int snd_sb_csp_riff_load(struct snd_sb_csp * p, return -EFAULT;

/* init microcode blocks */ - if (code_h.name != INIT_HEADER) + if (le32_to_cpu(code_h.name) != INIT_HEADER) break; data_ptr += sizeof(code_h); err = snd_sb_csp_load_user(p, data_ptr, le32_to_cpu(code_h.len), @@ -391,7 +391,7 @@ static int snd_sb_csp_riff_load(struct snd_sb_csp * p, if (copy_from_user(&code_h, data_ptr, sizeof(code_h))) return -EFAULT;

- if (code_h.name != MAIN_HEADER) { + if (le32_to_cpu(code_h.name) != MAIN_HEADER) { snd_printd("%s: Missing 'main' microcode\n", __func__); return -EINVAL; }