Split out from the ac97_codec.h the ac97 generic registers, which can be used by a codec, typically a generic ac97 codec, and by the ac97 bus, to scan an ac97 AC-Link.

This split encompasses all the AC97 standard registers, but not the codec specific ones.

In order to have a clean split between former ac97 bus implementation and the new coming one in sound/ac97, it is safer to not include any former ac97 includes, excepting in sound/ac97/compat.c.

Amongst the thing to isolate : - don't have the struct snd_ac97 in sound/ac97/* (except compat.c) to not be "fooled" by a definition which would come with ac97_codec.h by "chance". - don't have to have snd_a97_*() functions, as they rely on struct snd_ac97. - don't want the struct snd_ac97_bus_ops, there is a new one

Signed-off-by: Robert Jarzmik robert.jarzmik@free.fr --- Since v1: improve commit message to explain better the rationale Since v2: fixed too long commit line --- include/sound/ac97/regs.h | 262 +++++++++++++++++++++++++++++++++++++++++++++ include/sound/ac97_codec.h | 239 +---------------------------------------- 2 files changed, 263 insertions(+), 238 deletions(-) create mode 100644 include/sound/ac97/regs.h

diff --git a/include/sound/ac97/regs.h b/include/sound/ac97/regs.h new file mode 100644 index 000000000000..4bb86d379bd5 --- /dev/null +++ b/include/sound/ac97/regs.h @@ -0,0 +1,262 @@ +/* + * Copyright (c) by Jaroslav Kysela perex@perex.cz + * Universal interface for Audio Codec '97 + * + * For more details look to AC '97 component specification revision 2.1 + * by Intel Corporation (http://developer.intel.com). + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + * AC'97 codec registers + */ + +#define AC97_RESET 0x00 /* Reset */ +#define AC97_MASTER 0x02 /* Master Volume */ +#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */ +#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */ +#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */ +#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optinal) */ +#define AC97_PHONE 0x0c /* Phone Volume (optional) */ +#define AC97_MIC 0x0e /* MIC Volume */ +#define AC97_LINE 0x10 /* Line In Volume */ +#define AC97_CD 0x12 /* CD Volume */ +#define AC97_VIDEO 0x14 /* Video Volume (optional) */ +#define AC97_AUX 0x16 /* AUX Volume (optional) */ +#define AC97_PCM 0x18 /* PCM Volume */ +#define AC97_REC_SEL 0x1a /* Record Select */ +#define AC97_REC_GAIN 0x1c /* Record Gain */ +#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */ +#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */ +#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */ +#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */ +#define AC97_POWERDOWN 0x26 /* Powerdown control / status */ +/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */ +#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */ +#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */ +#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */ +#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */ +#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */ +#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */ +#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */ +#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */ +#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */ +#define AC97_SPDIF 0x3a /* S/PDIF control */ +/* range 0x3c-0x58 - MODEM */ +#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */ +#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */ +#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */ +#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */ +#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */ +#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */ +#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */ +#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */ +#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */ +#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */ +#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */ +#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */ +#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */ +#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */ +/* range 0x5a-0x7b - Vendor Specific */ +#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */ +#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */ +/* range 0x60-0x6f (page 1) - extended codec registers */ +#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */ +#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */ +#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */ +#define AC97_FUNC_SELECT 0x66 /* Function Select */ +#define AC97_FUNC_INFO 0x68 /* Function Information */ +#define AC97_SENSE_INFO 0x6a /* Sense Details */ + +/* volume controls */ +#define AC97_MUTE_MASK_MONO 0x8000 +#define AC97_MUTE_MASK_STEREO 0x8080 + +/* slot allocation */ +#define AC97_SLOT_TAG 0 +#define AC97_SLOT_CMD_ADDR 1 +#define AC97_SLOT_CMD_DATA 2 +#define AC97_SLOT_PCM_LEFT 3 +#define AC97_SLOT_PCM_RIGHT 4 +#define AC97_SLOT_MODEM_LINE1 5 +#define AC97_SLOT_PCM_CENTER 6 +#define AC97_SLOT_MIC 6 /* input */ +#define AC97_SLOT_SPDIF_LEFT1 6 +#define AC97_SLOT_PCM_SLEFT 7 /* surround left */ +#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */ +#define AC97_SLOT_SPDIF_LEFT 7 +#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */ +#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */ +#define AC97_SLOT_SPDIF_RIGHT 8 +#define AC97_SLOT_LFE 9 +#define AC97_SLOT_SPDIF_RIGHT1 9 +#define AC97_SLOT_MODEM_LINE2 10 +#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */ +#define AC97_SLOT_SPDIF_LEFT2 10 +#define AC97_SLOT_HANDSET 11 /* output */ +#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */ +#define AC97_SLOT_SPDIF_RIGHT2 11 +#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */ +#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */ + +/* basic capabilities (reset register) */ +#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */ +#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */ +#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */ +#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */ +#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */ +#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */ +#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */ +#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */ +#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */ +#define AC97_BC_DAC_MASK 0x00c0 +#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */ +#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */ +#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */ +#define AC97_BC_ADC_MASK 0x0300 +#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */ + +/* general purpose */ +#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */ +#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */ +#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */ + +/* powerdown bits */ +#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */ +#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */ +#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */ +#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */ +#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */ +#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */ +#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */ +#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */ +#define AC97_PD_PR4 0x1000 /* Power down AC-Link */ +#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */ +#define AC97_PD_PR6 0x4000 /* Headphone amplifier */ +#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */ + +/* extended audio ID bit defines */ +#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */ +#define AC97_EI_DRA 0x0002 /* Double rate supported */ +#define AC97_EI_SPDIF 0x0004 /* S/PDIF out supported */ +#define AC97_EI_VRM 0x0008 /* Variable bit rate supported for MIC */ +#define AC97_EI_DACS_SLOT_MASK 0x0030 /* DACs slot assignment */ +#define AC97_EI_DACS_SLOT_SHIFT 4 +#define AC97_EI_CDAC 0x0040 /* PCM Center DAC available */ +#define AC97_EI_SDAC 0x0080 /* PCM Surround DACs available */ +#define AC97_EI_LDAC 0x0100 /* PCM LFE DAC available */ +#define AC97_EI_AMAP 0x0200 /* indicates optional slot/DAC mapping based on codec ID */ +#define AC97_EI_REV_MASK 0x0c00 /* AC'97 revision mask */ +#define AC97_EI_REV_22 0x0400 /* AC'97 revision 2.2 */ +#define AC97_EI_REV_23 0x0800 /* AC'97 revision 2.3 */ +#define AC97_EI_REV_SHIFT 10 +#define AC97_EI_ADDR_MASK 0xc000 /* physical codec ID (address) */ +#define AC97_EI_ADDR_SHIFT 14 + +/* extended audio status and control bit defines */ +#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */ +#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */ +#define AC97_EA_SPDIF 0x0004 /* S/PDIF out enable bit */ +#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */ +#define AC97_EA_SPSA_SLOT_MASK 0x0030 /* Mask for slot assignment bits */ +#define AC97_EA_SPSA_SLOT_SHIFT 4 +#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */ +#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */ +#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */ +#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */ +#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */ +#define AC97_EA_SDAC 0x0080 /* PCM Surround DACs are ready (Read only) */ +#define AC97_EA_LDAC 0x0100 /* PCM LFE DAC is ready (Read only) */ +#define AC97_EA_MDAC 0x0200 /* MIC ADC is ready (Read only) */ +#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */ +#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */ +#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */ +#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */ +#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */ + +/* S/PDIF control bit defines */ +#define AC97_SC_PRO 0x0001 /* Professional status */ +#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */ +#define AC97_SC_COPY 0x0004 /* Copyright status */ +#define AC97_SC_PRE 0x0008 /* Preemphasis status */ +#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */ +#define AC97_SC_CC_SHIFT 4 +#define AC97_SC_L 0x0800 /* Generation Level status */ +#define AC97_SC_SPSR_MASK 0x3000 /* S/PDIF Sample Rate bits */ +#define AC97_SC_SPSR_SHIFT 12 +#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */ +#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */ +#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */ +#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */ +#define AC97_SC_V 0x8000 /* Validity status */ + +/* Interrupt and Paging bit defines (AC'97 2.3) */ +#define AC97_PAGE_MASK 0x000f /* Page Selector */ +#define AC97_PAGE_VENDOR 0 /* Vendor-specific registers */ +#define AC97_PAGE_1 1 /* Extended Codec Registers page 1 */ +#define AC97_INT_ENABLE 0x0800 /* Interrupt Enable */ +#define AC97_INT_SENSE 0x1000 /* Sense Cycle */ +#define AC97_INT_CAUSE_SENSE 0x2000 /* Sense Cycle Completed (RO) */ +#define AC97_INT_CAUSE_GPIO 0x4000 /* GPIO bits changed (RO) */ +#define AC97_INT_STATUS 0x8000 /* Interrupt Status */ + +/* extended modem ID bit defines */ +#define AC97_MEI_LINE1 0x0001 /* Line1 present */ +#define AC97_MEI_LINE2 0x0002 /* Line2 present */ +#define AC97_MEI_HANDSET 0x0004 /* Handset present */ +#define AC97_MEI_CID1 0x0008 /* caller ID decode for Line1 is supported */ +#define AC97_MEI_CID2 0x0010 /* caller ID decode for Line2 is supported */ +#define AC97_MEI_ADDR_MASK 0xc000 /* physical codec ID (address) */ +#define AC97_MEI_ADDR_SHIFT 14 + +/* extended modem status and control bit defines */ +#define AC97_MEA_GPIO 0x0001 /* GPIO is ready (ro) */ +#define AC97_MEA_MREF 0x0002 /* Vref is up to nominal level (ro) */ +#define AC97_MEA_ADC1 0x0004 /* ADC1 operational (ro) */ +#define AC97_MEA_DAC1 0x0008 /* DAC1 operational (ro) */ +#define AC97_MEA_ADC2 0x0010 /* ADC2 operational (ro) */ +#define AC97_MEA_DAC2 0x0020 /* DAC2 operational (ro) */ +#define AC97_MEA_HADC 0x0040 /* HADC operational (ro) */ +#define AC97_MEA_HDAC 0x0080 /* HDAC operational (ro) */ +#define AC97_MEA_PRA 0x0100 /* GPIO power down (high) */ +#define AC97_MEA_PRB 0x0200 /* reserved */ +#define AC97_MEA_PRC 0x0400 /* ADC1 power down (high) */ +#define AC97_MEA_PRD 0x0800 /* DAC1 power down (high) */ +#define AC97_MEA_PRE 0x1000 /* ADC2 power down (high) */ +#define AC97_MEA_PRF 0x2000 /* DAC2 power down (high) */ +#define AC97_MEA_PRG 0x4000 /* HADC power down (high) */ +#define AC97_MEA_PRH 0x8000 /* HDAC power down (high) */ + +/* modem gpio status defines */ +#define AC97_GPIO_LINE1_OH 0x0001 /* Off Hook Line1 */ +#define AC97_GPIO_LINE1_RI 0x0002 /* Ring Detect Line1 */ +#define AC97_GPIO_LINE1_CID 0x0004 /* Caller ID path enable Line1 */ +#define AC97_GPIO_LINE1_LCS 0x0008 /* Loop Current Sense Line1 */ +#define AC97_GPIO_LINE1_PULSE 0x0010 /* Opt./ Pulse Dial Line1 (out) */ +#define AC97_GPIO_LINE1_HL1R 0x0020 /* Opt./ Handset to Line1 relay control (out) */ +#define AC97_GPIO_LINE1_HOHD 0x0040 /* Opt./ Handset off hook detect Line1 (in) */ +#define AC97_GPIO_LINE12_AC 0x0080 /* Opt./ Int.bit 1 / Line1/2 AC (out) */ +#define AC97_GPIO_LINE12_DC 0x0100 /* Opt./ Int.bit 2 / Line1/2 DC (out) */ +#define AC97_GPIO_LINE12_RS 0x0200 /* Opt./ Int.bit 3 / Line1/2 RS (out) */ +#define AC97_GPIO_LINE2_OH 0x0400 /* Off Hook Line2 */ +#define AC97_GPIO_LINE2_RI 0x0800 /* Ring Detect Line2 */ +#define AC97_GPIO_LINE2_CID 0x1000 /* Caller ID path enable Line2 */ +#define AC97_GPIO_LINE2_LCS 0x2000 /* Loop Current Sense Line2 */ +#define AC97_GPIO_LINE2_PULSE 0x4000 /* Opt./ Pulse Dial Line2 (out) */ +#define AC97_GPIO_LINE2_HL1R 0x8000 /* Opt./ Handset to Line2 relay control (out) */ + diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 15aa5f07c955..89d311a503d3 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -28,6 +28,7 @@ #include <linux/bitops.h> #include <linux/device.h> #include <linux/workqueue.h> +#include <sound/ac97/regs.h> #include <sound/pcm.h> #include <sound/control.h> #include <sound/info.h> @@ -35,244 +36,6 @@ /* maximum number of devices on the AC97 bus */ #define AC97_BUS_MAX_DEVICES 4

-/* - * AC'97 codec registers - */ - -#define AC97_RESET 0x00 /* Reset */ -#define AC97_MASTER 0x02 /* Master Volume */ -#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */ -#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */ -#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */ -#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optinal) */ -#define AC97_PHONE 0x0c /* Phone Volume (optional) */ -#define AC97_MIC 0x0e /* MIC Volume */ -#define AC97_LINE 0x10 /* Line In Volume */ -#define AC97_CD 0x12 /* CD Volume */ -#define AC97_VIDEO 0x14 /* Video Volume (optional) */ -#define AC97_AUX 0x16 /* AUX Volume (optional) */ -#define AC97_PCM 0x18 /* PCM Volume */ -#define AC97_REC_SEL 0x1a /* Record Select */ -#define AC97_REC_GAIN 0x1c /* Record Gain */ -#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */ -#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */ -#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */ -#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */ -#define AC97_POWERDOWN 0x26 /* Powerdown control / status */ -/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */ -#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */ -#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */ -#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */ -#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */ -#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */ -#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */ -#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */ -#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */ -#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */ -#define AC97_SPDIF 0x3a /* S/PDIF control */ -/* range 0x3c-0x58 - MODEM */ -#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */ -#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */ -#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */ -#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */ -#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */ -#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */ -#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */ -#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */ -#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */ -#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */ -#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */ -#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */ -#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */ -#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */ -/* range 0x5a-0x7b - Vendor Specific */ -#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */ -#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */ -/* range 0x60-0x6f (page 1) - extended codec registers */ -#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */ -#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */ -#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */ -#define AC97_FUNC_SELECT 0x66 /* Function Select */ -#define AC97_FUNC_INFO 0x68 /* Function Information */ -#define AC97_SENSE_INFO 0x6a /* Sense Details */ - -/* volume controls */ -#define AC97_MUTE_MASK_MONO 0x8000 -#define AC97_MUTE_MASK_STEREO 0x8080 - -/* slot allocation */ -#define AC97_SLOT_TAG 0 -#define AC97_SLOT_CMD_ADDR 1 -#define AC97_SLOT_CMD_DATA 2 -#define AC97_SLOT_PCM_LEFT 3 -#define AC97_SLOT_PCM_RIGHT 4 -#define AC97_SLOT_MODEM_LINE1 5 -#define AC97_SLOT_PCM_CENTER 6 -#define AC97_SLOT_MIC 6 /* input */ -#define AC97_SLOT_SPDIF_LEFT1 6 -#define AC97_SLOT_PCM_SLEFT 7 /* surround left */ -#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */ -#define AC97_SLOT_SPDIF_LEFT 7 -#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */ -#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */ -#define AC97_SLOT_SPDIF_RIGHT 8 -#define AC97_SLOT_LFE 9 -#define AC97_SLOT_SPDIF_RIGHT1 9 -#define AC97_SLOT_MODEM_LINE2 10 -#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */ -#define AC97_SLOT_SPDIF_LEFT2 10 -#define AC97_SLOT_HANDSET 11 /* output */ -#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */ -#define AC97_SLOT_SPDIF_RIGHT2 11 -#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */ -#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */ - -/* basic capabilities (reset register) */ -#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */ -#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */ -#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */ -#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */ -#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */ -#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */ -#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */ -#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */ -#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */ -#define AC97_BC_DAC_MASK 0x00c0 -#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */ -#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */ -#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */ -#define AC97_BC_ADC_MASK 0x0300 -#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */ - -/* general purpose */ -#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */ -#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */ -#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */ - -/* powerdown bits */ -#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */ -#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */ -#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */ -#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */ -#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */ -#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */ -#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */ -#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */ -#define AC97_PD_PR4 0x1000 /* Power down AC-Link */ -#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */ -#define AC97_PD_PR6 0x4000 /* Headphone amplifier */ -#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */ - -/* extended audio ID bit defines */ -#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */ -#define AC97_EI_DRA 0x0002 /* Double rate supported */ -#define AC97_EI_SPDIF 0x0004 /* S/PDIF out supported */ -#define AC97_EI_VRM 0x0008 /* Variable bit rate supported for MIC */ -#define AC97_EI_DACS_SLOT_MASK 0x0030 /* DACs slot assignment */ -#define AC97_EI_DACS_SLOT_SHIFT 4 -#define AC97_EI_CDAC 0x0040 /* PCM Center DAC available */ -#define AC97_EI_SDAC 0x0080 /* PCM Surround DACs available */ -#define AC97_EI_LDAC 0x0100 /* PCM LFE DAC available */ -#define AC97_EI_AMAP 0x0200 /* indicates optional slot/DAC mapping based on codec ID */ -#define AC97_EI_REV_MASK 0x0c00 /* AC'97 revision mask */ -#define AC97_EI_REV_22 0x0400 /* AC'97 revision 2.2 */ -#define AC97_EI_REV_23 0x0800 /* AC'97 revision 2.3 */ -#define AC97_EI_REV_SHIFT 10 -#define AC97_EI_ADDR_MASK 0xc000 /* physical codec ID (address) */ -#define AC97_EI_ADDR_SHIFT 14 - -/* extended audio status and control bit defines */ -#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */ -#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */ -#define AC97_EA_SPDIF 0x0004 /* S/PDIF out enable bit */ -#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */ -#define AC97_EA_SPSA_SLOT_MASK 0x0030 /* Mask for slot assignment bits */ -#define AC97_EA_SPSA_SLOT_SHIFT 4 -#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */ -#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */ -#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */ -#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */ -#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */ -#define AC97_EA_SDAC 0x0080 /* PCM Surround DACs are ready (Read only) */ -#define AC97_EA_LDAC 0x0100 /* PCM LFE DAC is ready (Read only) */ -#define AC97_EA_MDAC 0x0200 /* MIC ADC is ready (Read only) */ -#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */ -#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */ -#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */ -#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */ -#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */ - -/* S/PDIF control bit defines */ -#define AC97_SC_PRO 0x0001 /* Professional status */ -#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */ -#define AC97_SC_COPY 0x0004 /* Copyright status */ -#define AC97_SC_PRE 0x0008 /* Preemphasis status */ -#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */ -#define AC97_SC_CC_SHIFT 4 -#define AC97_SC_L 0x0800 /* Generation Level status */ -#define AC97_SC_SPSR_MASK 0x3000 /* S/PDIF Sample Rate bits */ -#define AC97_SC_SPSR_SHIFT 12 -#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */ -#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */ -#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */ -#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */ -#define AC97_SC_V 0x8000 /* Validity status */ - -/* Interrupt and Paging bit defines (AC'97 2.3) */ -#define AC97_PAGE_MASK 0x000f /* Page Selector */ -#define AC97_PAGE_VENDOR 0 /* Vendor-specific registers */ -#define AC97_PAGE_1 1 /* Extended Codec Registers page 1 */ -#define AC97_INT_ENABLE 0x0800 /* Interrupt Enable */ -#define AC97_INT_SENSE 0x1000 /* Sense Cycle */ -#define AC97_INT_CAUSE_SENSE 0x2000 /* Sense Cycle Completed (RO) */ -#define AC97_INT_CAUSE_GPIO 0x4000 /* GPIO bits changed (RO) */ -#define AC97_INT_STATUS 0x8000 /* Interrupt Status */ - -/* extended modem ID bit defines */ -#define AC97_MEI_LINE1 0x0001 /* Line1 present */ -#define AC97_MEI_LINE2 0x0002 /* Line2 present */ -#define AC97_MEI_HANDSET 0x0004 /* Handset present */ -#define AC97_MEI_CID1 0x0008 /* caller ID decode for Line1 is supported */ -#define AC97_MEI_CID2 0x0010 /* caller ID decode for Line2 is supported */ -#define AC97_MEI_ADDR_MASK 0xc000 /* physical codec ID (address) */ -#define AC97_MEI_ADDR_SHIFT 14 - -/* extended modem status and control bit defines */ -#define AC97_MEA_GPIO 0x0001 /* GPIO is ready (ro) */ -#define AC97_MEA_MREF 0x0002 /* Vref is up to nominal level (ro) */ -#define AC97_MEA_ADC1 0x0004 /* ADC1 operational (ro) */ -#define AC97_MEA_DAC1 0x0008 /* DAC1 operational (ro) */ -#define AC97_MEA_ADC2 0x0010 /* ADC2 operational (ro) */ -#define AC97_MEA_DAC2 0x0020 /* DAC2 operational (ro) */ -#define AC97_MEA_HADC 0x0040 /* HADC operational (ro) */ -#define AC97_MEA_HDAC 0x0080 /* HDAC operational (ro) */ -#define AC97_MEA_PRA 0x0100 /* GPIO power down (high) */ -#define AC97_MEA_PRB 0x0200 /* reserved */ -#define AC97_MEA_PRC 0x0400 /* ADC1 power down (high) */ -#define AC97_MEA_PRD 0x0800 /* DAC1 power down (high) */ -#define AC97_MEA_PRE 0x1000 /* ADC2 power down (high) */ -#define AC97_MEA_PRF 0x2000 /* DAC2 power down (high) */ -#define AC97_MEA_PRG 0x4000 /* HADC power down (high) */ -#define AC97_MEA_PRH 0x8000 /* HDAC power down (high) */ - -/* modem gpio status defines */ -#define AC97_GPIO_LINE1_OH 0x0001 /* Off Hook Line1 */ -#define AC97_GPIO_LINE1_RI 0x0002 /* Ring Detect Line1 */ -#define AC97_GPIO_LINE1_CID 0x0004 /* Caller ID path enable Line1 */ -#define AC97_GPIO_LINE1_LCS 0x0008 /* Loop Current Sense Line1 */ -#define AC97_GPIO_LINE1_PULSE 0x0010 /* Opt./ Pulse Dial Line1 (out) */ -#define AC97_GPIO_LINE1_HL1R 0x0020 /* Opt./ Handset to Line1 relay control (out) */ -#define AC97_GPIO_LINE1_HOHD 0x0040 /* Opt./ Handset off hook detect Line1 (in) */ -#define AC97_GPIO_LINE12_AC 0x0080 /* Opt./ Int.bit 1 / Line1/2 AC (out) */ -#define AC97_GPIO_LINE12_DC 0x0100 /* Opt./ Int.bit 2 / Line1/2 DC (out) */ -#define AC97_GPIO_LINE12_RS 0x0200 /* Opt./ Int.bit 3 / Line1/2 RS (out) */ -#define AC97_GPIO_LINE2_OH 0x0400 /* Off Hook Line2 */ -#define AC97_GPIO_LINE2_RI 0x0800 /* Ring Detect Line2 */ -#define AC97_GPIO_LINE2_CID 0x1000 /* Caller ID path enable Line2 */ -#define AC97_GPIO_LINE2_LCS 0x2000 /* Loop Current Sense Line2 */ -#define AC97_GPIO_LINE2_PULSE 0x4000 /* Opt./ Pulse Dial Line2 (out) */ -#define AC97_GPIO_LINE2_HL1R 0x8000 /* Opt./ Handset to Line2 relay control (out) */ - /* specific - SigmaTel */ #define AC97_SIGMATEL_OUTSEL 0x64 /* Output Select, STAC9758 */ #define AC97_SIGMATEL_INSEL 0x66 /* Input Select, STAC9758 */

AC97 is a bus for sound usage. It enables for a AC97 AC-Link to link one controller to 0 to 4 AC97 codecs.

The goal of this new implementation is to implement a device/driver model for AC97, with an automatic scan of the bus and automatic discovery of AC97 codec devices.

Signed-off-by: Robert Jarzmik robert.jarzmik@free.fr --- Since RFCv1: - Takashi's review - changed the codec.h guard ... a better name could be found ... - added the AC97_* macros missing parenthesis - constantified the id_table in the codec driver structure - changed the 4 codecs linked list into an array - enabled the ac97 bus to be a module - added a slots_available to snd_ac97_controller_register() to have a way to prevent scanning and probing of unconnected codecs - removed useless ac97 bus index - all exported functions begin with snd_ac97_*() - change bus operations to controller+slot parameters instead of codec device

- Mark's review - changed ac97_digital_controller into ac97_controller - rename ac97_digital_controller_*() into ac97_controller_*() - add the ac97 ac-link clock to the codec device (ie. the AC'97 BIT_CLK)

Since RFCv2: - more snd_ac97 namespace review - change the compat allocation prototype to force the user to provide and ac97_codec_device structure pointer

Since v1: - took into account all Lars comments

Since v3: - took into account Takashi's comments (ac97bus naming and module_exit)

Since v4: - took into account Takashi's comments (GPL, mask match on warm reset, device_put(), warnings) --- include/sound/ac97/codec.h | 118 +++++++++ include/sound/ac97/compat.h | 20 ++ include/sound/ac97/controller.h | 85 +++++++ sound/ac97/Kconfig | 19 ++ sound/ac97/Makefile | 8 + sound/ac97/ac97_core.h | 16 ++ sound/ac97/bus.c | 539 ++++++++++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 ++ sound/ac97/snd_ac97_compat.c | 108 ++++++++ 9 files changed, 928 insertions(+) create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c

diff --git a/include/sound/ac97/codec.h b/include/sound/ac97/codec.h new file mode 100644 index 000000000000..ec04be9ab119 --- /dev/null +++ b/include/sound/ac97/codec.h @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2016 Robert Jarzmik robert.jarzmik@free.fr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SOUND_AC97_CODEC2_H +#define __SOUND_AC97_CODEC2_H + +#include <linux/device.h> + +#define AC97_ID(vendor_id1, vendor_id2) \ + ((((vendor_id1) & 0xffff) << 16) | ((vendor_id2) & 0xffff)) +#define AC97_DRIVER_ID(vendor_id1, vendor_id2, mask_id1, mask_id2, _data) \ + { .id = (((vendor_id1) & 0xffff) << 16) | ((vendor_id2) & 0xffff), \ + .mask = (((mask_id1) & 0xffff) << 16) | ((mask_id2) & 0xffff), \ + .data = (_data) } + +struct ac97_controller; +struct clk; + +/** + * struct ac97_id - matches a codec device and driver on an ac97 bus + * @id: The significant bits if the codec vendor ID1 and ID2 + * @mask: Bitmask specifying which bits of the id field are significant when + * matching. A driver binds to a device when : + * ((vendorID1 << 8 | vendorID2) & (mask_id1 << 8 | mask_id2)) == id. + * @data: Private data used by the driver. + */ +struct ac97_id { + unsigned int id; + unsigned int mask; + void *data; +}; + +/** + * ac97_codec_device - a ac97 codec + * @dev: the core device + * @vendor_id: the vendor_id of the codec, as sensed on the AC-link + * @num: the codec number, 0 is primary, 1 is first slave, etc ... + * @clk: the clock BIT_CLK provided by the codec + * @ac97_ctrl: ac97 digital controller on the same AC-link + * + * This is the device instantiated for each codec living on a AC-link. There are + * normally 0 to 4 codec devices per AC-link, and all of them are controlled by + * an AC97 digital controller. + */ +struct ac97_codec_device { + struct device dev; + unsigned int vendor_id; + unsigned int num; + struct clk *clk; + struct ac97_controller *ac97_ctrl; +}; + +/** + * ac97_codec_driver - a ac97 codec driver + * @driver: the device driver structure + * @probe: the function called when a ac97_codec_device is matched + * @remove: the function called when the device is unbound/removed + * @shutdown: shutdown function (might be NULL) + * @id_table: ac97 vendor_id match table, { } member terminated + */ +struct ac97_codec_driver { + struct device_driver driver; + int (*probe)(struct ac97_codec_device *); + int (*remove)(struct ac97_codec_device *); + void (*shutdown)(struct ac97_codec_device *); + const struct ac97_id *id_table; +}; + +static inline struct ac97_codec_device *to_ac97_device(struct device *d) +{ + return container_of(d, struct ac97_codec_device, dev); +} + +static inline struct ac97_codec_driver *to_ac97_driver(struct device_driver *d) +{ + return container_of(d, struct ac97_codec_driver, driver); +} + +#if IS_ENABLED(CONFIG_AC97_BUS_NEW) +int snd_ac97_codec_driver_register(struct ac97_codec_driver *drv); +void snd_ac97_codec_driver_unregister(struct ac97_codec_driver *drv); +#else +static inline int +snd_ac97_codec_driver_register(struct ac97_codec_driver *drv) +{ + return 0; +} +static inline void +snd_ac97_codec_driver_unregister(struct ac97_codec_driver *drv) +{ +} +#endif + + +static inline struct device * +ac97_codec_dev2dev(struct ac97_codec_device *adev) +{ + return &adev->dev; +} + +static inline void *ac97_get_drvdata(struct ac97_codec_device *adev) +{ + return dev_get_drvdata(ac97_codec_dev2dev(adev)); +} + +static inline void ac97_set_drvdata(struct ac97_codec_device *adev, + void *data) +{ + dev_set_drvdata(ac97_codec_dev2dev(adev), data); +} + +void *snd_ac97_codec_get_platdata(const struct ac97_codec_device *adev); + +#endif diff --git a/include/sound/ac97/compat.h b/include/sound/ac97/compat.h new file mode 100644 index 000000000000..1351cba40048 --- /dev/null +++ b/include/sound/ac97/compat.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2016 Robert Jarzmik robert.jarzmik@free.fr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file is for backward compatibility with snd_ac97 structure and its + * multiple usages, such as the snd_ac97_bus and snd_ac97_build_ops. + * + */ +#ifndef AC97_COMPAT_H +#define AC97_COMPAT_H + +#include <sound/ac97_codec.h> + +struct snd_ac97 *snd_ac97_compat_alloc(struct ac97_codec_device *adev); +void snd_ac97_compat_release(struct snd_ac97 *ac97); + +#endif diff --git a/include/sound/ac97/controller.h b/include/sound/ac97/controller.h new file mode 100644 index 000000000000..b36ecdd64f14 --- /dev/null +++ b/include/sound/ac97/controller.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2016 Robert Jarzmik robert.jarzmik@free.fr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef AC97_CONTROLLER_H +#define AC97_CONTROLLER_H + +#include <linux/device.h> +#include <linux/list.h> + +#define AC97_BUS_MAX_CODECS 4 +#define AC97_SLOTS_AVAILABLE_ALL 0xf + +struct ac97_controller_ops; + +/** + * struct ac97_controller - The AC97 controller of the AC-Link + * @ops: the AC97 operations. + * @controllers: linked list of all existing controllers. + * @adap: the shell device ac97-%d, ie. ac97 adapter + * @nr: the number of the shell device + * @slots_available: the mask of accessible/scanable codecs. + * @parent: the device providing the AC97 controller. + * @codecs: the 4 possible AC97 codecs (NULL if none found). + * @codecs_pdata: platform_data for each codec (NULL if no pdata). + * + * This structure is internal to AC97 bus, and should not be used by the + * controllers themselves, excepting for using @dev. + */ +struct ac97_controller { + const struct ac97_controller_ops *ops; + struct list_head controllers; + struct device adap; + int nr; + unsigned short slots_available; + struct device *parent; + struct ac97_codec_device *codecs[AC97_BUS_MAX_CODECS]; + void *codecs_pdata[AC97_BUS_MAX_CODECS]; +}; + +/** + * struct ac97_controller_ops - The AC97 operations + * @reset: Cold reset of the AC97 AC-Link. + * @warm_reset: Warm reset of the AC97 AC-Link. + * @read: Read of a single AC97 register. + * Returns the register value or a negative error code. + * @write: Write of a single AC97 register. + * + * These are the basic operation an AC97 controller must provide for an AC97 + * access functions. Amongst these, all but the last 2 are mandatory. + * The slot number is also known as the AC97 codec number, between 0 and 3. + */ +struct ac97_controller_ops { + void (*reset)(struct ac97_controller *adrv); + void (*warm_reset)(struct ac97_controller *adrv); + int (*write)(struct ac97_controller *adrv, int slot, + unsigned short reg, unsigned short val); + int (*read)(struct ac97_controller *adrv, int slot, unsigned short reg); +}; + +#if IS_ENABLED(CONFIG_AC97_BUS_NEW) +struct ac97_controller *snd_ac97_controller_register( + const struct ac97_controller_ops *ops, struct device *dev, + unsigned short slots_available, void **codecs_pdata); +void snd_ac97_controller_unregister(struct ac97_controller *ac97_ctrl); +#else +static inline struct ac97_controller * +snd_ac97_controller_register(const struct ac97_controller_ops *ops, + struct device *dev, + unsigned short slots_available, + void **codecs_pdata) +{ + return ERR_PTR(-ENODEV); +} + +static inline void +snd_ac97_controller_unregister(struct ac97_controller *ac97_ctrl) +{ +} +#endif + +#endif diff --git a/sound/ac97/Kconfig b/sound/ac97/Kconfig new file mode 100644 index 000000000000..f8a64e15e5bf --- /dev/null +++ b/sound/ac97/Kconfig @@ -0,0 +1,19 @@ +# +# AC97 configuration +# + + +config AC97_BUS_NEW + tristate + select AC97 + help + This is the new AC97 bus type, successor of AC97_BUS. The ported + drivers which benefit from the AC97 automatic probing should "select" + this instead of the AC97_BUS. + Say Y here if you want to have AC97 devices, which are sound oriented + devices around an AC-Link. + +config AC97_BUS_COMPAT + bool + depends on AC97_BUS_NEW + depends on !AC97_BUS diff --git a/sound/ac97/Makefile b/sound/ac97/Makefile new file mode 100644 index 000000000000..f9c2640bfb59 --- /dev/null +++ b/sound/ac97/Makefile @@ -0,0 +1,8 @@ +# +# make for AC97 bus drivers +# + +obj-$(CONFIG_AC97_BUS_NEW) += ac97.o + +ac97-y += bus.o codec.o +ac97-$(CONFIG_AC97_BUS_COMPAT) += snd_ac97_compat.o diff --git a/sound/ac97/ac97_core.h b/sound/ac97/ac97_core.h new file mode 100644 index 000000000000..08441a4fda7c --- /dev/null +++ b/sound/ac97/ac97_core.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2016 Robert Jarzmik robert.jarzmik@free.fr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +unsigned int snd_ac97_bus_scan_one(struct ac97_controller *ac97, + unsigned int codec_num); + +static inline bool ac97_ids_match(unsigned int id1, unsigned int id2, + unsigned int mask) +{ + return (id1 & mask) == (id2 & mask); +} diff --git a/sound/ac97/bus.c b/sound/ac97/bus.c new file mode 100644 index 000000000000..31f858eceffc --- /dev/null +++ b/sound/ac97/bus.c @@ -0,0 +1,539 @@ +/* + * Copyright (C) 2016 Robert Jarzmik robert.jarzmik@free.fr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/idr.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <sound/ac97/codec.h> +#include <sound/ac97/controller.h> +#include <sound/ac97/regs.h> + +#include "ac97_core.h" + +/* + * Protects ac97_controllers and each ac97_controller structure. + */ +static DEFINE_MUTEX(ac97_controllers_mutex); +static DEFINE_IDR(ac97_adapter_idr); +static LIST_HEAD(ac97_controllers); + +static struct bus_type ac97_bus_type; + +static inline struct ac97_controller* +to_ac97_controller(struct device *ac97_adapter) +{ + return container_of(ac97_adapter, struct ac97_controller, adap); +} + +static int ac97_unbound_ctrl_write(struct ac97_controller *adrv, int slot, + unsigned short reg, unsigned short val) +{ + return -ENODEV; +} + +static int ac97_unbound_ctrl_read(struct ac97_controller *adrv, int slot, + unsigned short reg) +{ + return -ENODEV; +} + +static const struct ac97_controller_ops ac97_unbound_ctrl_ops = { + .write = ac97_unbound_ctrl_write, + .read = ac97_unbound_ctrl_read, +}; + +static struct ac97_controller ac97_unbound_ctrl = { + .ops = &ac97_unbound_ctrl_ops, +}; + +static struct ac97_codec_device * +ac97_codec_find(struct ac97_controller *ac97_ctrl, unsigned int codec_num) +{ + if (codec_num >= AC97_BUS_MAX_CODECS) + return ERR_PTR(-EINVAL); + + return ac97_ctrl->codecs[codec_num]; +} + +static void ac97_codec_release(struct device *dev) +{ + struct ac97_codec_device *adev; + struct ac97_controller *ac97_ctrl; + + adev = to_ac97_device(dev); + ac97_ctrl = adev->ac97_ctrl; + ac97_ctrl->codecs[adev->num] = NULL; + kfree(adev); +} + +static int ac97_codec_add(struct ac97_controller *ac97_ctrl, int idx, + unsigned int vendor_id) +{ + struct ac97_codec_device *codec; + int ret; + + codec = kzalloc(sizeof(*codec), GFP_KERNEL); + if (!codec) + return -ENOMEM; + ac97_ctrl->codecs[idx] = codec; + codec->vendor_id = vendor_id; + codec->dev.release = ac97_codec_release; + codec->dev.bus = &ac97_bus_type; + codec->dev.parent = &ac97_ctrl->adap; + codec->num = idx; + codec->ac97_ctrl = ac97_ctrl; + + device_initialize(&codec->dev); + dev_set_name(&codec->dev, "%s:%u", dev_name(ac97_ctrl->parent), idx); + + ret = device_add(&codec->dev); + if (ret) + goto err_free_codec; + + return 0; +err_free_codec: + put_device(&codec->dev); + kfree(codec); + ac97_ctrl->codecs[idx] = NULL; + + return ret; +} + +unsigned int snd_ac97_bus_scan_one(struct ac97_controller *adrv, + unsigned int codec_num) +{ + unsigned short vid1, vid2; + int ret; + + ret = adrv->ops->read(adrv, codec_num, AC97_VENDOR_ID1); + vid1 = (ret & 0xffff); + if (ret < 0) + return 0; + + ret = adrv->ops->read(adrv, codec_num, AC97_VENDOR_ID2); + vid2 = (ret & 0xffff); + if (ret < 0) + return 0; + + dev_dbg(&adrv->adap, "%s(codec_num=%u): vendor_id=0x%08x\n", + __func__, codec_num, AC97_ID(vid1, vid2)); + return AC97_ID(vid1, vid2); +} + +static int ac97_bus_scan(struct ac97_controller *ac97_ctrl) +{ + int ret, i; + unsigned int vendor_id; + + for (i = 0; i < AC97_BUS_MAX_CODECS; i++) { + if (ac97_codec_find(ac97_ctrl, i)) + continue; + if (!(ac97_ctrl->slots_available & BIT(i))) + continue; + vendor_id = snd_ac97_bus_scan_one(ac97_ctrl, i); + if (!vendor_id) + continue; + + ret = ac97_codec_add(ac97_ctrl, i, vendor_id); + if (ret < 0) + return ret; + } + return 0; +} + +static int ac97_bus_reset(struct ac97_controller *ac97_ctrl) +{ + ac97_ctrl->ops->reset(ac97_ctrl); + + return 0; +} + +/** + * snd_ac97_codec_driver_register - register an AC97 codec driver + * @dev: AC97 driver codec to register + * + * Register an AC97 codec driver to the ac97 bus driver, aka. the AC97 digital + * controller. + * + * Returns 0 on success or error code + */ +int snd_ac97_codec_driver_register(struct ac97_codec_driver *drv) +{ + drv->driver.bus = &ac97_bus_type; + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(snd_ac97_codec_driver_register); + +/** + * snd_ac97_codec_driver_unregister - unregister an AC97 codec driver + * @dev: AC97 codec driver to unregister + * + * Unregister a previously registered ac97 codec driver. + */ +void snd_ac97_codec_driver_unregister(struct ac97_codec_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(snd_ac97_codec_driver_unregister); + +/** + * snd_ac97_codec_get_platdata - get platform_data + * @adev: the ac97 codec device + * + * For legacy platforms, in order to have platform_data in codec drivers + * available, while ac97 device are auto-created upon probe, this retrieves the + * platdata which was setup on ac97 controller registration. + * + * Returns the platform data pointer + */ +void *snd_ac97_codec_get_platdata(const struct ac97_codec_device *adev) +{ + struct ac97_controller *ac97_ctrl = adev->ac97_ctrl; + + return ac97_ctrl->codecs_pdata[adev->num]; +} +EXPORT_SYMBOL_GPL(snd_ac97_codec_get_platdata); + +static void ac97_ctrl_codecs_unregister(struct ac97_controller *ac97_ctrl) +{ + int i; + + for (i = 0; i < AC97_BUS_MAX_CODECS; i++) + if (ac97_ctrl->codecs[i]) { + ac97_ctrl->codecs[i]->ac97_ctrl = &ac97_unbound_ctrl; + device_unregister(&ac97_ctrl->codecs[i]->dev); + } +} + +static ssize_t cold_reset_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t len) +{ + struct ac97_controller *ac97_ctrl; + + mutex_lock(&ac97_controllers_mutex); + ac97_ctrl = to_ac97_controller(dev); + ac97_ctrl->ops->reset(ac97_ctrl); + mutex_unlock(&ac97_controllers_mutex); + return len; +} +static DEVICE_ATTR_WO(cold_reset); + +static ssize_t warm_reset_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t len) +{ + struct ac97_controller *ac97_ctrl; + + if (!dev) + return -ENODEV; + + mutex_lock(&ac97_controllers_mutex); + ac97_ctrl = to_ac97_controller(dev); + ac97_ctrl->ops->warm_reset(ac97_ctrl); + mutex_unlock(&ac97_controllers_mutex); + return len; +} +static DEVICE_ATTR_WO(warm_reset); + +static struct attribute *ac97_controller_device_attrs[] = { + &dev_attr_cold_reset.attr, + &dev_attr_warm_reset.attr, + NULL +}; + +static struct attribute_group ac97_adapter_attr_group = { + .name = "ac97_operations", + .attrs = ac97_controller_device_attrs, +}; + +static const struct attribute_group *ac97_adapter_groups[] = { + &ac97_adapter_attr_group, + NULL, +}; + +static void ac97_del_adapter(struct ac97_controller *ac97_ctrl) +{ + mutex_lock(&ac97_controllers_mutex); + ac97_ctrl_codecs_unregister(ac97_ctrl); + list_del(&ac97_ctrl->controllers); + mutex_unlock(&ac97_controllers_mutex); + + device_unregister(&ac97_ctrl->adap); +} + +static void ac97_adapter_release(struct device *dev) +{ + struct ac97_controller *ac97_ctrl; + + ac97_ctrl = to_ac97_controller(dev); + idr_remove(&ac97_adapter_idr, ac97_ctrl->nr); + dev_dbg(&ac97_ctrl->adap, "adapter unregistered by %s\n", + dev_name(ac97_ctrl->parent)); +} + +static const struct device_type ac97_adapter_type = { + .groups = ac97_adapter_groups, + .release = ac97_adapter_release, +}; + +static int ac97_add_adapter(struct ac97_controller *ac97_ctrl) +{ + int ret; + + mutex_lock(&ac97_controllers_mutex); + ret = idr_alloc(&ac97_adapter_idr, ac97_ctrl, 0, 0, GFP_KERNEL); + ac97_ctrl->nr = ret; + if (ret >= 0) { + dev_set_name(&ac97_ctrl->adap, "ac97-%d", ret); + ac97_ctrl->adap.type = &ac97_adapter_type; + ac97_ctrl->adap.parent = ac97_ctrl->parent; + ret = device_register(&ac97_ctrl->adap); + if (ret) + put_device(&ac97_ctrl->adap); + } + if (!ret) + list_add(&ac97_ctrl->controllers, &ac97_controllers); + mutex_unlock(&ac97_controllers_mutex); + + if (!ret) + dev_dbg(&ac97_ctrl->adap, "adapter registered by %s\n", + dev_name(ac97_ctrl->parent)); + return ret; +} + +/** + * snd_ac97_controller_register - register an ac97 controller + * @ops: the ac97 bus operations + * @dev: the device providing the ac97 DC function + * @slots_available: mask of the ac97 codecs that can be scanned and probed + * bit0 => codec 0, bit1 => codec 1 ... bit 3 => codec 3 + * + * Register a digital controller which can control up to 4 ac97 codecs. This is + * the controller side of the AC97 AC-link, while the slave side are the codecs. + * + * Returns a valid controller upon success, negative pointer value upon error + */ +struct ac97_controller *snd_ac97_controller_register( + const struct ac97_controller_ops *ops, struct device *dev, + unsigned short slots_available, void **codecs_pdata) +{ + struct ac97_controller *ac97_ctrl; + int ret, i; + + ac97_ctrl = kzalloc(sizeof(*ac97_ctrl), GFP_KERNEL); + if (!ac97_ctrl) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < AC97_BUS_MAX_CODECS && codecs_pdata; i++) + ac97_ctrl->codecs_pdata[i] = codecs_pdata[i]; + + ac97_ctrl->ops = ops; + ac97_ctrl->slots_available = slots_available; + ac97_ctrl->parent = dev; + ret = ac97_add_adapter(ac97_ctrl); + + if (ret) + goto err; + ac97_bus_reset(ac97_ctrl); + ac97_bus_scan(ac97_ctrl); + + return ac97_ctrl; +err: + kfree(ac97_ctrl); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(snd_ac97_controller_register); + +/** + * snd_ac97_controller_unregister - unregister an ac97 controller + * @ac97_ctrl: the device previously provided to ac97_controller_register() + * + */ +void snd_ac97_controller_unregister(struct ac97_controller *ac97_ctrl) +{ + ac97_del_adapter(ac97_ctrl); +} +EXPORT_SYMBOL_GPL(snd_ac97_controller_unregister); + +#ifdef CONFIG_PM +static int ac97_pm_runtime_suspend(struct device *dev) +{ + struct ac97_codec_device *codec = to_ac97_device(dev); + int ret = pm_generic_runtime_suspend(dev); + + if (ret == 0 && dev->driver) { + if (pm_runtime_is_irq_safe(dev)) + clk_disable(codec->clk); + else + clk_disable_unprepare(codec->clk); + } + + return ret; +} + +static int ac97_pm_runtime_resume(struct device *dev) +{ + struct ac97_codec_device *codec = to_ac97_device(dev); + int ret; + + if (dev->driver) { + if (pm_runtime_is_irq_safe(dev)) + ret = clk_enable(codec->clk); + else + ret = clk_prepare_enable(codec->clk); + if (ret) + return ret; + } + + return pm_generic_runtime_resume(dev); +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops ac97_pm = { + .suspend = pm_generic_suspend, + .resume = pm_generic_resume, + .freeze = pm_generic_freeze, + .thaw = pm_generic_thaw, + .poweroff = pm_generic_poweroff, + .restore = pm_generic_restore, + SET_RUNTIME_PM_OPS( + ac97_pm_runtime_suspend, + ac97_pm_runtime_resume, + NULL) +}; + +static int ac97_get_enable_clk(struct ac97_codec_device *adev) +{ + int ret; + + adev->clk = clk_get(&adev->dev, "ac97_clk"); + if (IS_ERR(adev->clk)) + return PTR_ERR(adev->clk); + + ret = clk_prepare_enable(adev->clk); + if (ret) + clk_put(adev->clk); + + return ret; +} + +static void ac97_put_disable_clk(struct ac97_codec_device *adev) +{ + clk_disable_unprepare(adev->clk); + clk_put(adev->clk); +} + +static ssize_t vendor_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ac97_codec_device *codec = to_ac97_device(dev); + + return sprintf(buf, "%08x", codec->vendor_id); +} +DEVICE_ATTR_RO(vendor_id); + +static struct attribute *ac97_dev_attrs[] = { + &dev_attr_vendor_id.attr, + NULL, +}; +ATTRIBUTE_GROUPS(ac97_dev); + +static int ac97_bus_match(struct device *dev, struct device_driver *drv) +{ + struct ac97_codec_device *adev = to_ac97_device(dev); + struct ac97_codec_driver *adrv = to_ac97_driver(drv); + const struct ac97_id *id = adrv->id_table; + int i = 0; + + if (adev->vendor_id == 0x0 || adev->vendor_id == 0xffffffff) + return false; + + do { + if (ac97_ids_match(id[i].id, adev->vendor_id, id[i].mask)) + return true; + } while (id[i++].id); + + return false; +} + +static int ac97_bus_probe(struct device *dev) +{ + struct ac97_codec_device *adev = to_ac97_device(dev); + struct ac97_codec_driver *adrv = to_ac97_driver(dev->driver); + int ret; + + ret = ac97_get_enable_clk(adev); + if (ret) + return ret; + + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + ret = adrv->probe(adev); + if (ret == 0) + return 0; + + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); + ac97_put_disable_clk(adev); + + return ret; +} + +static int ac97_bus_remove(struct device *dev) +{ + struct ac97_codec_device *adev = to_ac97_device(dev); + struct ac97_codec_driver *adrv = to_ac97_driver(dev->driver); + int ret; + + ret = pm_runtime_get_sync(dev); + if (ret) + return ret; + + ret = adrv->remove(adev); + pm_runtime_put_noidle(dev); + if (ret == 0) + ac97_put_disable_clk(adev); + + return ret; +} + +static struct bus_type ac97_bus_type = { + .name = "ac97bus", + .dev_groups = ac97_dev_groups, + .match = ac97_bus_match, + .pm = &ac97_pm, + .probe = ac97_bus_probe, + .remove = ac97_bus_remove, +}; + +static int __init ac97_bus_init(void) +{ + return bus_register(&ac97_bus_type); +} +subsys_initcall(ac97_bus_init); + +static void __exit ac97_bus_exit(void) +{ + bus_unregister(&ac97_bus_type); +} +module_exit(ac97_bus_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Robert Jarzmik robert.jarzmik@free.fr"); diff --git a/sound/ac97/codec.c b/sound/ac97/codec.c new file mode 100644 index 000000000000..a835f03744bf --- /dev/null +++ b/sound/ac97/codec.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2016 Robert Jarzmik robert.jarzmik@free.fr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <sound/ac97_codec.h> +#include <sound/ac97/codec.h> +#include <sound/ac97/controller.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <sound/soc.h> /* For compat_ac97_* */ + diff --git a/sound/ac97/snd_ac97_compat.c b/sound/ac97/snd_ac97_compat.c new file mode 100644 index 000000000000..61544e0d8de4 --- /dev/null +++ b/sound/ac97/snd_ac97_compat.c @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2016 Robert Jarzmik robert.jarzmik@free.fr + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/list.h> +#include <linux/slab.h> +#include <sound/ac97/codec.h> +#include <sound/ac97/compat.h> +#include <sound/ac97/controller.h> +#include <sound/soc.h> + +#include "ac97_core.h" + +static void compat_ac97_reset(struct snd_ac97 *ac97) +{ + struct ac97_codec_device *adev = to_ac97_device(ac97->private_data); + struct ac97_controller *actrl = adev->ac97_ctrl; + + if (actrl->ops->reset) + actrl->ops->reset(actrl); +} + +static void compat_ac97_warm_reset(struct snd_ac97 *ac97) +{ + struct ac97_codec_device *adev = to_ac97_device(ac97->private_data); + struct ac97_controller *actrl = adev->ac97_ctrl; + + if (actrl->ops->warm_reset) + actrl->ops->warm_reset(actrl); +} + +static void compat_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + struct ac97_codec_device *adev = to_ac97_device(ac97->private_data); + struct ac97_controller *actrl = adev->ac97_ctrl; + + actrl->ops->write(actrl, ac97->num, reg, val); +} + +static unsigned short compat_ac97_read(struct snd_ac97 *ac97, + unsigned short reg) +{ + struct ac97_codec_device *adev = to_ac97_device(ac97->private_data); + struct ac97_controller *actrl = adev->ac97_ctrl; + + return actrl->ops->read(actrl, ac97->num, reg); +} + +static struct snd_ac97_bus_ops compat_snd_ac97_bus_ops = { + .reset = compat_ac97_reset, + .warm_reset = compat_ac97_warm_reset, + .write = compat_ac97_write, + .read = compat_ac97_read, +}; + +static struct snd_ac97_bus compat_soc_ac97_bus = { + .ops = &compat_snd_ac97_bus_ops, +}; + +struct snd_ac97 *snd_ac97_compat_alloc(struct ac97_codec_device *adev) +{ + struct snd_ac97 *ac97; + + ac97 = kzalloc(sizeof(struct snd_ac97), GFP_KERNEL); + if (ac97 == NULL) + return ERR_PTR(-ENOMEM); + + ac97->dev = adev->dev; + ac97->private_data = adev; + ac97->bus = &compat_soc_ac97_bus; + return ac97; +} +EXPORT_SYMBOL_GPL(snd_ac97_compat_alloc); + +void snd_ac97_compat_release(struct snd_ac97 *ac97) +{ + kfree(ac97); +} +EXPORT_SYMBOL_GPL(snd_ac97_compat_release); + +int snd_ac97_reset(struct snd_ac97 *ac97, bool try_warm, unsigned int id, + unsigned int id_mask) +{ + struct ac97_codec_device *adev = to_ac97_device(ac97->private_data); + struct ac97_controller *actrl = adev->ac97_ctrl; + unsigned int scanned; + + if (try_warm) { + compat_ac97_warm_reset(ac97); + scanned = snd_ac97_bus_scan_one(actrl, adev->num); + if (ac97_ids_match(scanned, adev->vendor_id, id_mask)) + return 1; + } + + compat_ac97_reset(ac97); + compat_ac97_warm_reset(ac97); + scanned = snd_ac97_bus_scan_one(actrl, adev->num); + if (ac97_ids_match(scanned, adev->vendor_id, id_mask)) + return 0; + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(snd_ac97_reset);

Add the new ac97 bus support, with ac97 bus automatic probing.

Signed-off-by: Robert Jarzmik robert.jarzmik@free.fr Acked-by: Charles Keepax ckeepax@opensource.wolfsonmicro.com --- sound/Kconfig | 2 ++ sound/Makefile | 1 + 2 files changed, 3 insertions(+)

diff --git a/sound/Kconfig b/sound/Kconfig index ee2e69a9ecd1..141b145c4195 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -80,6 +80,8 @@ source "sound/hda/Kconfig"

source "sound/ppc/Kconfig"

+source "sound/ac97/Kconfig" + source "sound/aoa/Kconfig"

source "sound/arm/Kconfig" diff --git a/sound/Makefile b/sound/Makefile index 6de45d2c32f7..c03b0bed65d5 100644 --- a/sound/Makefile +++ b/sound/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_SND_AOA) += aoa/

# This one must be compilable even if sound is configured out obj-$(CONFIG_AC97_BUS) += ac97_bus.o +obj-$(CONFIG_AC97_BUS_NEW) += ac97/

ifeq ($(CONFIG_SND),y) obj-y += last.o

wm97xx-core does several things in it initialization : - touchscreen input device setup - battery device creation

As the wm97xx is actually a multi-function device handling an audio codec, a touchscreen, a gpio block and an ADC, reshape the probing to isolate what is truly input/touchscreen specific from the remaining part.

This is only code shuffling, there is no functional change.

Signed-off-by: Robert Jarzmik robert.jarzmik@free.fr Acked-by: Dmitry Torokhov dmitry.torokhov@gmail.com Acked-by: Charles Keepax ckeepax@opensource.wolfsonmicro.com --- Since v1: - took into account Charles's comment --- drivers/input/touchscreen/wm97xx-core.c | 196 +++++++++++++++++++------------- 1 file changed, 115 insertions(+), 81 deletions(-)

diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index c9d1c91e1887..39869ffdc4fa 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -581,27 +581,85 @@ static void wm97xx_ts_input_close(struct input_dev *idev) wm->codec->acc_enable(wm, 0); }

-static int wm97xx_probe(struct device *dev) +static int wm97xx_register_touch(struct wm97xx *wm) { - struct wm97xx *wm; - struct wm97xx_pdata *pdata = dev_get_platdata(dev); - int ret = 0, id = 0; + struct wm97xx_pdata *pdata = dev_get_platdata(wm->dev); + int ret;

- wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL); - if (!wm) + wm->input_dev = devm_input_allocate_device(wm->dev); + if (wm->input_dev == NULL) return -ENOMEM; - mutex_init(&wm->codec_mutex);

- wm->dev = dev; - dev_set_drvdata(dev, wm); - wm->ac97 = to_ac97_t(dev); + /* set up touch configuration */ + wm->input_dev->name = "wm97xx touchscreen"; + wm->input_dev->phys = "wm97xx"; + wm->input_dev->open = wm97xx_ts_input_open; + wm->input_dev->close = wm97xx_ts_input_close; + + __set_bit(EV_ABS, wm->input_dev->evbit); + __set_bit(EV_KEY, wm->input_dev->evbit); + __set_bit(BTN_TOUCH, wm->input_dev->keybit); + + input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1], + abs_x[2], 0); + input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1], + abs_y[2], 0); + input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1], + abs_p[2], 0); + + input_set_drvdata(wm->input_dev, wm); + wm->input_dev->dev.parent = wm->dev; + + ret = input_register_device(wm->input_dev); + if (ret) + return ret; + + /* + * register our extended touch device (for machine specific + * extensions) + */ + wm->touch_dev = platform_device_alloc("wm97xx-touch", -1); + if (!wm->touch_dev) { + ret = -ENOMEM; + goto touch_err; + } + platform_set_drvdata(wm->touch_dev, wm); + wm->touch_dev->dev.parent = wm->dev; + wm->touch_dev->dev.platform_data = pdata; + ret = platform_device_add(wm->touch_dev); + if (ret < 0) + goto touch_reg_err; + + return 0; +touch_reg_err: + platform_device_put(wm->touch_dev); +touch_err: + input_unregister_device(wm->input_dev); + wm->input_dev = NULL; + + return ret; +} + +static void wm97xx_unregister_touch(struct wm97xx *wm) +{ + platform_device_unregister(wm->touch_dev); + input_unregister_device(wm->input_dev); + wm->input_dev = NULL; +} + +static int _wm97xx_probe(struct wm97xx *wm) +{ + int id = 0; + + mutex_init(&wm->codec_mutex); + dev_set_drvdata(wm->dev, wm);

/* check that we have a supported codec */ id = wm97xx_reg_read(wm, AC97_VENDOR_ID1); if (id != WM97XX_ID1) { - dev_err(dev, "Device with vendor %04x is not a wm97xx\n", id); - ret = -ENODEV; - goto alloc_err; + dev_err(wm->dev, + "Device with vendor %04x is not a wm97xx\n", id); + return -ENODEV; }

wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2); @@ -629,8 +687,7 @@ static int wm97xx_probe(struct device *dev) default: dev_err(wm->dev, "Support for wm97%02x not compiled in.\n", wm->id & 0xff); - ret = -ENODEV; - goto alloc_err; + return -ENODEV; }

/* set up physical characteristics */ @@ -644,79 +701,58 @@ static int wm97xx_probe(struct device *dev) wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);

- wm->input_dev = input_allocate_device(); - if (wm->input_dev == NULL) { - ret = -ENOMEM; - goto alloc_err; - } - - /* set up touch configuration */ - wm->input_dev->name = "wm97xx touchscreen"; - wm->input_dev->phys = "wm97xx"; - wm->input_dev->open = wm97xx_ts_input_open; - wm->input_dev->close = wm97xx_ts_input_close; - - __set_bit(EV_ABS, wm->input_dev->evbit); - __set_bit(EV_KEY, wm->input_dev->evbit); - __set_bit(BTN_TOUCH, wm->input_dev->keybit); - - input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1], - abs_x[2], 0); - input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1], - abs_y[2], 0); - input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1], - abs_p[2], 0); + return wm97xx_register_touch(wm); +}

- input_set_drvdata(wm->input_dev, wm); - wm->input_dev->dev.parent = dev; +static void wm97xx_remove_battery(struct wm97xx *wm) +{ + platform_device_unregister(wm->battery_dev); +}

- ret = input_register_device(wm->input_dev); - if (ret < 0) - goto dev_alloc_err; +static int wm97xx_add_battery(struct wm97xx *wm, + struct wm97xx_batt_pdata *pdata) +{ + int ret;

- /* register our battery device */ wm->battery_dev = platform_device_alloc("wm97xx-battery", -1); - if (!wm->battery_dev) { - ret = -ENOMEM; - goto batt_err; - } + if (!wm->battery_dev) + return -ENOMEM; + platform_set_drvdata(wm->battery_dev, wm); - wm->battery_dev->dev.parent = dev; - wm->battery_dev->dev.platform_data = pdata ? pdata->batt_pdata : NULL; + wm->battery_dev->dev.parent = wm->dev; + wm->battery_dev->dev.platform_data = pdata; ret = platform_device_add(wm->battery_dev); - if (ret < 0) - goto batt_reg_err; + if (ret) + platform_device_put(wm->battery_dev);

- /* register our extended touch device (for machine specific - * extensions) */ - wm->touch_dev = platform_device_alloc("wm97xx-touch", -1); - if (!wm->touch_dev) { - ret = -ENOMEM; - goto touch_err; - } - platform_set_drvdata(wm->touch_dev, wm); - wm->touch_dev->dev.parent = dev; - wm->touch_dev->dev.platform_data = pdata; - ret = platform_device_add(wm->touch_dev); + return ret; +} + +static int wm97xx_probe(struct device *dev) +{ + struct wm97xx *wm; + int ret; + struct wm97xx_pdata *pdata = dev_get_platdata(dev); + + wm = devm_kzalloc(dev, sizeof(struct wm97xx), GFP_KERNEL); + if (!wm) + return -ENOMEM; + + wm->dev = dev; + wm->ac97 = to_ac97_t(dev); + + ret = _wm97xx_probe(wm); + if (ret) + return ret; + + ret = wm97xx_add_battery(wm, pdata ? pdata->batt_pdata : NULL); if (ret < 0) - goto touch_reg_err; + goto batt_err;

return ret;

- touch_reg_err: - platform_device_put(wm->touch_dev); - touch_err: - platform_device_del(wm->battery_dev); - batt_reg_err: - platform_device_put(wm->battery_dev); - batt_err: - input_unregister_device(wm->input_dev); - wm->input_dev = NULL; - dev_alloc_err: - input_free_device(wm->input_dev); - alloc_err: - kfree(wm); - +batt_err: + wm97xx_unregister_touch(wm); return ret; }

@@ -724,10 +760,8 @@ static int wm97xx_remove(struct device *dev) { struct wm97xx *wm = dev_get_drvdata(dev);

- platform_device_unregister(wm->battery_dev); - platform_device_unregister(wm->touch_dev); - input_unregister_device(wm->input_dev); - kfree(wm); + wm97xx_remove_battery(wm); + wm97xx_unregister_touch(wm);

return 0; }

Add support for the new ac97 bus model, where devices are automatically discovered on AC-Links.

Signed-off-by: Robert Jarzmik robert.jarzmik@free.fr Acked-by: Charles Keepax ckeepax@opensource.wolfsonmicro.com --- sound/soc/codecs/Kconfig | 3 ++- sound/soc/codecs/wm9713.c | 39 +++++++++++++++++++++++++++------------ 2 files changed, 29 insertions(+), 13 deletions(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index e49e9da7f1f6..aebf148d7e4d 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -207,7 +207,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM9090 if I2C select SND_SOC_WM9705 if SND_SOC_AC97_BUS select SND_SOC_WM9712 if SND_SOC_AC97_BUS - select SND_SOC_WM9713 if SND_SOC_AC97_BUS + select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) help Normally ASoC codec drivers are only built if a machine driver which uses them is also built since they are only usable with a machine @@ -1091,6 +1091,7 @@ config SND_SOC_WM9712 config SND_SOC_WM9713 tristate select REGMAP_AC97 + select AC97_BUS_COMPAT if AC97_BUS_NEW

# Amp config SND_SOC_LM4857 diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 7e4822185feb..3df2c01d751d 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -17,12 +17,15 @@

#include <linux/init.h> #include <linux/slab.h> +#include <linux/mfd/wm97xx.h> #include <linux/module.h> #include <linux/device.h> #include <linux/regmap.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/ac97_codec.h> +#include <sound/ac97/codec.h> +#include <sound/ac97/compat.h> #include <sound/initval.h> #include <sound/pcm_params.h> #include <sound/tlv.h> @@ -38,6 +41,7 @@ struct wm9713_priv { u32 pll_in; /* PLL input frequency */ unsigned int hp_mixer[2]; struct mutex lock; + struct wm97xx_platform_data *mfd_pdata; };

#define HPL_MIXER 0 @@ -1205,17 +1209,23 @@ static int wm9713_soc_resume(struct snd_soc_codec *codec) static int wm9713_soc_probe(struct snd_soc_codec *codec) { struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec); - struct regmap *regmap; + struct regmap *regmap = NULL;

- wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID, - WM9713_VENDOR_ID_MASK); - if (IS_ERR(wm9713->ac97)) - return PTR_ERR(wm9713->ac97); - - regmap = regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config); - if (IS_ERR(regmap)) { - snd_soc_free_ac97_codec(wm9713->ac97); - return PTR_ERR(regmap); + if (wm9713->mfd_pdata) { + wm9713->ac97 = wm9713->mfd_pdata->ac97; + regmap = wm9713->mfd_pdata->regmap; + } else { +#ifdef CONFIG_SND_SOC_AC97_BUS + wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID, + WM9713_VENDOR_ID_MASK); + if (IS_ERR(wm9713->ac97)) + return PTR_ERR(wm9713->ac97); + regmap = regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config); + if (IS_ERR(regmap)) { + snd_soc_free_ac97_codec(wm9713->ac97); + return PTR_ERR(regmap); + } +#endif }

snd_soc_codec_init_regmap(codec, regmap); @@ -1230,8 +1240,12 @@ static int wm9713_soc_remove(struct snd_soc_codec *codec) { struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);

- snd_soc_codec_exit_regmap(codec); - snd_soc_free_ac97_codec(wm9713->ac97); + if (!wm9713->mfd_pdata) { + snd_soc_codec_exit_regmap(codec); +#ifdef CONFIG_SND_SOC_AC97_BUS + snd_soc_free_ac97_codec(wm9713->ac97); +#endif + } return 0; }

@@ -1262,6 +1276,7 @@ static int wm9713_probe(struct platform_device *pdev)

mutex_init(&wm9713->lock);

+ wm9713->mfd_pdata = dev_get_platdata(&pdev->dev); platform_set_drvdata(pdev, wm9713);

return snd_soc_register_codec(&pdev->dev,

Add support for the new ac97 bus model, where devices are automatically discovered on AC-Links.

Signed-off-by: Robert Jarzmik robert.jarzmik@free.fr Acked-by: Charles Keepax ckeepax@opensource.wolfsonmicro.com --- Since v4: - added #ifdef spotted by Charles - tentatively kept Charles's ack --- sound/soc/codecs/Kconfig | 3 ++- sound/soc/codecs/wm9705.c | 37 +++++++++++++++++++++++++------------ 2 files changed, 27 insertions(+), 13 deletions(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index f17af3592785..1d69a1c1f896 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -205,7 +205,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8998 if MFD_WM8998 select SND_SOC_WM9081 if I2C select SND_SOC_WM9090 if I2C - select SND_SOC_WM9705 if SND_SOC_AC97_BUS + select SND_SOC_WM9705 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) help @@ -1083,6 +1083,7 @@ config SND_SOC_WM9090 config SND_SOC_WM9705 tristate select REGMAP_AC97 + select AC97_BUS_COMPAT if AC97_BUS_NEW

config SND_SOC_WM9712 tristate diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index 08477d040028..46b5a77c53e4 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -11,6 +11,7 @@

#include <linux/init.h> #include <linux/slab.h> +#include <linux/mfd/wm97xx.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/device.h> @@ -18,6 +19,8 @@ #include <sound/core.h> #include <sound/pcm.h> #include <sound/ac97_codec.h> +#include <sound/ac97/codec.h> +#include <sound/ac97/compat.h> #include <sound/initval.h> #include <sound/soc.h>

@@ -26,6 +29,7 @@

struct wm9705_priv { struct snd_ac97 *ac97; + struct wm97xx_platform_data *mfd_pdata; };

static const struct reg_default wm9705_reg_defaults[] = { @@ -319,17 +323,24 @@ static int wm9705_soc_probe(struct snd_soc_codec *codec) struct regmap *regmap; int ret;

- wm9705->ac97 = snd_soc_new_ac97_codec(codec, WM9705_VENDOR_ID, - WM9705_VENDOR_ID_MASK); - if (IS_ERR(wm9705->ac97)) { - dev_err(codec->dev, "Failed to register AC97 codec\n"); - return PTR_ERR(wm9705->ac97); - } - - regmap = regmap_init_ac97(wm9705->ac97, &wm9705_regmap_config); - if (IS_ERR(regmap)) { - ret = PTR_ERR(regmap); - goto err_free_ac97_codec; + if (wm9705->mfd_pdata) { + wm9705->ac97 = wm9705->mfd_pdata->ac97; + regmap = wm9705->mfd_pdata->regmap; + } else { +#ifdef CONFIG_SND_SOC_AC97_BUS + wm9705->ac97 = snd_soc_new_ac97_codec(codec, WM9705_VENDOR_ID, + WM9705_VENDOR_ID_MASK); + if (IS_ERR(wm9705->ac97)) { + dev_err(codec->dev, "Failed to register AC97 codec\n"); + return PTR_ERR(wm9705->ac97); + } + + regmap = regmap_init_ac97(wm9705->ac97, &wm9705_regmap_config); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + goto err_free_ac97_codec; + } +#endif }

snd_soc_codec_set_drvdata(codec, wm9705->ac97); @@ -346,7 +357,8 @@ static int wm9705_soc_remove(struct snd_soc_codec *codec) struct wm9705_priv *wm9705 = snd_soc_codec_get_drvdata(codec);

snd_soc_codec_exit_regmap(codec); - snd_soc_free_ac97_codec(wm9705->ac97); + if (!wm9705->mfd_pdata) + snd_soc_free_ac97_codec(wm9705->ac97); return 0; }

@@ -374,6 +386,7 @@ static int wm9705_probe(struct platform_device *pdev) if (wm9705 == NULL) return -ENOMEM;

+ wm9705->mfd_pdata = dev_get_platdata(&pdev->dev); platform_set_drvdata(pdev, wm9705);

return snd_soc_register_codec(&pdev->dev,