[alsa-devel] [PATCH] ASoC: omap: Add basic audio support for Nokia RX-51/N900
This patch adds support for integrated stereo speakers and digital microphone found on Nokia RX-51 hardware. This is a cut down version based on Maemo kernel sources and earlier patchset by Eduardo Valentin et al.
http://mailman.alsa-project.org/pipermail/alsa-devel/2009-October/022033.htm...
Signed-off-by: Jarkko Nikula jhnikula@gmail.com Cc: Eduardo Valentin eduardo.valentin@nokia.com Cc: Peter Ujfalusi peter.ujfalusi@nokia.com
---
This is for sound-2.6.git. This is independent and boot safe patch but audio codec doesn't probe without a few patches to arch/arm/mach-omap2/board-rx51-peripherals.c. See
http://marc.info/?l=linux-omap&m=127290212826770&w=2
Some audio features would need more work and some, even being trivial to add, need more testing are there support for them in mainline. Thus this heavily simplified and little bit cleaned up version. --- sound/soc/omap/Kconfig | 10 ++ sound/soc/omap/Makefile | 2 + sound/soc/omap/rx51.c | 305 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 317 insertions(+), 0 deletions(-) create mode 100644 sound/soc/omap/rx51.c
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index f11963c..83be4a7 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -18,6 +18,16 @@ config SND_OMAP_SOC_N810 help Say Y if you want to add support for SoC audio on Nokia N810.
+config SND_OMAP_SOC_RX51 + tristate "SoC Audio support for Nokia RX-51" + depends on SND_OMAP_SOC && MACH_NOKIA_RX51 + select OMAP_MCBSP + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC3X + help + Say Y if you want to add support for SoC audio on Nokia RX-51 + hardware. This is also known as Nokia N900 product. + config SND_OMAP_SOC_AMS_DELTA tristate "SoC Audio support for Amstrad E3 (Delta) videophone" depends on SND_OMAP_SOC && MACH_AMS_DELTA diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 0bc00ca..3a75755 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
# OMAP Machine Support snd-soc-n810-objs := n810.o +snd-soc-rx51-objs := rx51.o snd-soc-ams-delta-objs := ams-delta.o snd-soc-osk5912-objs := osk5912.o snd-soc-overo-objs := overo.o @@ -22,6 +23,7 @@ snd-soc-zoom2-objs := zoom2.o snd-soc-igep0020-objs := igep0020.o
obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o +obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c new file mode 100644 index 0000000..425362b --- /dev/null +++ b/sound/soc/omap/rx51.c @@ -0,0 +1,305 @@ +/* + * rx51.c -- SoC audio for Nokia RX-51 + * + * Copyright (C) 2008 - 2009 Nokia Corporation + * + * Contact: Peter Ujfalusi peter.ujfalusi@nokia.com + * Eduardo Valentin eduardo.valentin@nokia.com + * Jarkko Nikula jhnikula@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> + +#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/tlv320aic3x.h" + +#define RX51_CODEC_RESET_GPIO 60 +/* + * REVISIT: TWL4030 GPIO base in RX-51. Now statically defined to 192. This + * gpio is reserved in arch/arm/mach-omap2/board-rx51-peripherals.c + */ +#define RX51_SPEAKER_AMP_TWL_GPIO (192 + 7) + +static int rx51_spk_func; +static int rx51_dmic_func; + +static void rx51_ext_control(struct snd_soc_codec *codec) +{ + if (rx51_spk_func) + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + else + snd_soc_dapm_disable_pin(codec, "Ext Spk"); + if (rx51_dmic_func) + snd_soc_dapm_enable_pin(codec, "DMic"); + else + snd_soc_dapm_disable_pin(codec, "DMic"); + + snd_soc_dapm_sync(codec); +} + +static int rx51_startup(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec *codec = rtd->socdev->card->codec; + + snd_pcm_hw_constraint_minmax(runtime, + SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2); + rx51_ext_control(codec); + + return 0; +} + +static int rx51_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int err; + + /* Set codec DAI configuration */ + err = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_IB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (err < 0) + return err; + + /* Set cpu DAI configuration */ + err = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_IB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (err < 0) + return err; + + /* Set the codec system clock for DAC and ADC */ + return snd_soc_dai_set_sysclk(codec_dai, 0, 19200000, + SND_SOC_CLOCK_IN); +} + +static struct snd_soc_ops rx51_ops = { + .startup = rx51_startup, + .hw_params = rx51_hw_params, +}; + +static int rx51_get_spk(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = rx51_spk_func; + + return 0; +} + +static int rx51_set_spk(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + + if (rx51_spk_func == ucontrol->value.integer.value[0]) + return 0; + + rx51_spk_func = ucontrol->value.integer.value[0]; + rx51_ext_control(codec); + + return 1; +} + +static int rx51_spk_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + if (SND_SOC_DAPM_EVENT_ON(event)) + gpio_set_value(RX51_SPEAKER_AMP_TWL_GPIO, 1); + else + gpio_set_value(RX51_SPEAKER_AMP_TWL_GPIO, 0); + + return 0; +} + +static int rx51_get_input(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = rx51_dmic_func; + + return 0; +} + +static int rx51_set_input(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + + if (rx51_dmic_func == ucontrol->value.integer.value[0]) + return 0; + + rx51_dmic_func = ucontrol->value.integer.value[0]; + rx51_ext_control(codec); + + return 1; +} + +static const struct snd_soc_dapm_widget aic34_dapm_widgets[] = { + SND_SOC_DAPM_SPK("Ext Spk", rx51_spk_event), + SND_SOC_DAPM_MIC("DMic", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Ext Spk", NULL, "HPLOUT"}, + {"Ext Spk", NULL, "HPROUT"}, + + {"DMic Rate 64", NULL, "Mic Bias 2V"}, + {"Mic Bias 2V", NULL, "DMic"}, +}; + +static const char *spk_function[] = {"Off", "On"}; +static const char *input_function[] = {"ADC", "Digital Mic"}; + +static const struct soc_enum rx51_enum[] = { + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(spk_function), spk_function), + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(input_function), input_function), +}; + +static const struct snd_kcontrol_new aic34_rx51_controls[] = { + SOC_ENUM_EXT("Speaker Function", rx51_enum[0], + rx51_get_spk, rx51_set_spk), + SOC_ENUM_EXT("Input Select", rx51_enum[1], + rx51_get_input, rx51_set_input), +}; + +static int rx51_aic34_init(struct snd_soc_codec *codec) +{ + int err; + + /* Set up NC codec pins */ + snd_soc_dapm_nc_pin(codec, "MIC3L"); + snd_soc_dapm_nc_pin(codec, "MIC3R"); + snd_soc_dapm_nc_pin(codec, "LINE1R"); + + /* Add RX-51 specific controls */ + err = snd_soc_add_controls(codec, aic34_rx51_controls, + ARRAY_SIZE(aic34_rx51_controls)); + if (err < 0) + return err; + + /* Add RX-51 specific widgets */ + snd_soc_dapm_new_controls(codec, aic34_dapm_widgets, + ARRAY_SIZE(aic34_dapm_widgets)); + + /* Set up RX-51 specific audio path audio_map */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_sync(codec); + + return 0; +} + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link rx51_dai[] = { + { + .name = "TLV320AIC34", + .stream_name = "AIC34", + .cpu_dai = &omap_mcbsp_dai[0], + .codec_dai = &aic3x_dai, + .init = rx51_aic34_init, + .ops = &rx51_ops, + }, +}; + +/* Audio private data */ +static struct aic3x_setup_data rx51_aic34_setup = { + .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, + .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, +}; + +/* Audio card */ +static struct snd_soc_card rx51_sound_card = { + .name = "RX-51", + .dai_link = rx51_dai, + .num_links = ARRAY_SIZE(rx51_dai), + .platform = &omap_soc_platform, +}; + +/* Audio subsystem */ +static struct snd_soc_device rx51_snd_devdata = { + .card = &rx51_sound_card, + .codec_dev = &soc_codec_dev_aic3x, + .codec_data = &rx51_aic34_setup, +}; + +static struct platform_device *rx51_snd_device; + +static int __init rx51_soc_init(void) +{ + int err; + + if (!machine_is_nokia_rx51()) + return -ENODEV; + + BUG_ON(gpio_request(RX51_CODEC_RESET_GPIO, NULL) < 0); + gpio_direction_output(RX51_CODEC_RESET_GPIO, 0); + + gpio_set_value(RX51_CODEC_RESET_GPIO, 0); + udelay(1); + gpio_set_value(RX51_CODEC_RESET_GPIO, 1); + msleep(1); + + rx51_snd_device = platform_device_alloc("soc-audio", -1); + if (!rx51_snd_device) { + err = -ENOMEM; + goto err1; + } + + platform_set_drvdata(rx51_snd_device, &rx51_snd_devdata); + rx51_snd_devdata.dev = &rx51_snd_device->dev; + *(unsigned int *)rx51_dai[0].cpu_dai->private_data = 1; /* McBSP2 */ + + err = platform_device_add(rx51_snd_device); + if (err) + goto err2; + + return 0; +err2: + platform_device_put(rx51_snd_device); +err1: + gpio_free(RX51_CODEC_RESET_GPIO); + + return err; +} + +static void __exit rx51_soc_exit(void) +{ + platform_device_unregister(rx51_snd_device); + gpio_free(RX51_CODEC_RESET_GPIO); +} + +module_init(rx51_soc_init); +module_exit(rx51_soc_exit); + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("ALSA SoC Nokia RX-51"); +MODULE_LICENSE("GPL");
Hello Jarkko,
this looks good, however I have some comments below.
On Wednesday 05 May 2010 08:31:16 ext Jarkko Nikula wrote:
This patch adds support for integrated stereo speakers and digital microphone found on Nokia RX-51 hardware. This is a cut down version based on Maemo kernel sources and earlier patchset by Eduardo Valentin et al.
http://mailman.alsa-project.org/pipermail/alsa-devel/2009-October/022033.ht ml
Signed-off-by: Jarkko Nikula jhnikula@gmail.com Cc: Eduardo Valentin eduardo.valentin@nokia.com Cc: Peter Ujfalusi peter.ujfalusi@nokia.com
This is for sound-2.6.git. This is independent and boot safe patch but audio codec doesn't probe without a few patches to arch/arm/mach-omap2/board-rx51-peripherals.c. See
http://marc.info/?l=linux-omap&m=127290212826770&w=2
Some audio features would need more work and some, even being trivial to add, need more testing are there support for them in mainline. Thus this heavily simplified and little bit cleaned up version.
sound/soc/omap/Kconfig | 10 ++ sound/soc/omap/Makefile | 2 + sound/soc/omap/rx51.c | 305 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 317 insertions(+), 0 deletions(-) create mode 100644 sound/soc/omap/rx51.c
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index f11963c..83be4a7 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -18,6 +18,16 @@ config SND_OMAP_SOC_N810 help Say Y if you want to add support for SoC audio on Nokia N810.
+config SND_OMAP_SOC_RX51
tristate "SoC Audio support for Nokia RX-51"
depends on SND_OMAP_SOC && MACH_NOKIA_RX51
select OMAP_MCBSP
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on Nokia RX-51
hardware. This is also known as Nokia N900 product.
config SND_OMAP_SOC_AMS_DELTA tristate "SoC Audio support for Amstrad E3 (Delta) videophone" depends on SND_OMAP_SOC && MACH_AMS_DELTA diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 0bc00ca..3a75755 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
# OMAP Machine Support snd-soc-n810-objs := n810.o +snd-soc-rx51-objs := rx51.o snd-soc-ams-delta-objs := ams-delta.o snd-soc-osk5912-objs := osk5912.o snd-soc-overo-objs := overo.o @@ -22,6 +23,7 @@ snd-soc-zoom2-objs := zoom2.o snd-soc-igep0020-objs := igep0020.o
obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o +obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c new file mode 100644 index 0000000..425362b --- /dev/null +++ b/sound/soc/omap/rx51.c @@ -0,0 +1,305 @@ +/*
- rx51.c -- SoC audio for Nokia RX-51
- Copyright (C) 2008 - 2009 Nokia Corporation
- Contact: Peter Ujfalusi peter.ujfalusi@nokia.com
Eduardo Valentin <eduardo.valentin@nokia.com>
Jarkko Nikula <jhnikula@gmail.com>
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as published by the Free Software Foundation.
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- 02110-1301 USA
- */
+#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h>
+#include <asm/mach-types.h>
+#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/tlv320aic3x.h"
+#define RX51_CODEC_RESET_GPIO 60 +/*
- REVISIT: TWL4030 GPIO base in RX-51. Now statically defined to 192.
This + * gpio is reserved in arch/arm/mach-omap2/board-rx51-peripherals.c
- */
+#define RX51_SPEAKER_AMP_TWL_GPIO (192 + 7)
+static int rx51_spk_func; +static int rx51_dmic_func;
+static void rx51_ext_control(struct snd_soc_codec *codec) +{
if (rx51_spk_func)
snd_soc_dapm_enable_pin(codec, "Ext Spk");
else
snd_soc_dapm_disable_pin(codec, "Ext Spk");
if (rx51_dmic_func)
snd_soc_dapm_enable_pin(codec, "DMic");
else
snd_soc_dapm_disable_pin(codec, "DMic");
snd_soc_dapm_sync(codec);
+}
+static int rx51_startup(struct snd_pcm_substream *substream) +{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->socdev->card->codec;
snd_pcm_hw_constraint_minmax(runtime,
SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
rx51_ext_control(codec);
return 0;
+}
+static int rx51_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
+{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
int err;
/* Set codec DAI configuration */
err = snd_soc_dai_set_fmt(codec_dai,
SND_SOC_DAIFMT_DSP_A |
SND_SOC_DAIFMT_IB_NF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0)
return err;
/* Set cpu DAI configuration */
err = snd_soc_dai_set_fmt(cpu_dai,
SND_SOC_DAIFMT_DSP_A |
SND_SOC_DAIFMT_IB_NF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0)
return err;
/* Set the codec system clock for DAC and ADC */
return snd_soc_dai_set_sysclk(codec_dai, 0, 19200000,
SND_SOC_CLOCK_IN);
+}
+static struct snd_soc_ops rx51_ops = {
.startup = rx51_startup,
.hw_params = rx51_hw_params,
+};
+static int rx51_get_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
+{
ucontrol->value.integer.value[0] = rx51_spk_func;
return 0;
+}
+static int rx51_set_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
+{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
if (rx51_spk_func == ucontrol->value.integer.value[0])
return 0;
rx51_spk_func = ucontrol->value.integer.value[0];
rx51_ext_control(codec);
return 1;
+}
+static int rx51_spk_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
+{
if (SND_SOC_DAPM_EVENT_ON(event))
gpio_set_value(RX51_SPEAKER_AMP_TWL_GPIO, 1);
else
gpio_set_value(RX51_SPEAKER_AMP_TWL_GPIO, 0);
return 0;
+}
+static int rx51_get_input(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
+{
ucontrol->value.integer.value[0] = rx51_dmic_func;
return 0;
+}
+static int rx51_set_input(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
+{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
if (rx51_dmic_func == ucontrol->value.integer.value[0])
return 0;
rx51_dmic_func = ucontrol->value.integer.value[0];
rx51_ext_control(codec);
return 1;
+}
+static const struct snd_soc_dapm_widget aic34_dapm_widgets[] = {
SND_SOC_DAPM_SPK("Ext Spk", rx51_spk_event),
SND_SOC_DAPM_MIC("DMic", NULL),
+};
+static const struct snd_soc_dapm_route audio_map[] = {
{"Ext Spk", NULL, "HPLOUT"},
{"Ext Spk", NULL, "HPROUT"},
{"DMic Rate 64", NULL, "Mic Bias 2V"},
{"Mic Bias 2V", NULL, "DMic"},
+};
+static const char *spk_function[] = {"Off", "On"}; +static const char *input_function[] = {"ADC", "Digital Mic"};
+static const struct soc_enum rx51_enum[] = {
SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(spk_function), spk_function),
SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(input_function), input_function),
+};
+static const struct snd_kcontrol_new aic34_rx51_controls[] = {
SOC_ENUM_EXT("Speaker Function", rx51_enum[0],
rx51_get_spk, rx51_set_spk),
SOC_ENUM_EXT("Input Select", rx51_enum[1],
rx51_get_input, rx51_set_input),
+};
+static int rx51_aic34_init(struct snd_soc_codec *codec) +{
int err;
/* Set up NC codec pins */
snd_soc_dapm_nc_pin(codec, "MIC3L");
snd_soc_dapm_nc_pin(codec, "MIC3R");
snd_soc_dapm_nc_pin(codec, "LINE1R");
/* Add RX-51 specific controls */
err = snd_soc_add_controls(codec, aic34_rx51_controls,
ARRAY_SIZE(aic34_rx51_controls));
if (err < 0)
return err;
/* Add RX-51 specific widgets */
snd_soc_dapm_new_controls(codec, aic34_dapm_widgets,
ARRAY_SIZE(aic34_dapm_widgets));
/* Set up RX-51 specific audio path audio_map */
snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
snd_soc_dapm_sync(codec);
return 0;
+}
+/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link rx51_dai[] = {
{
.name = "TLV320AIC34",
.stream_name = "AIC34",
.cpu_dai = &omap_mcbsp_dai[0],
.codec_dai = &aic3x_dai,
.init = rx51_aic34_init,
.ops = &rx51_ops,
},
+};
+/* Audio private data */ +static struct aic3x_setup_data rx51_aic34_setup = {
.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
+};
+/* Audio card */ +static struct snd_soc_card rx51_sound_card = {
.name = "RX-51",
.dai_link = rx51_dai,
.num_links = ARRAY_SIZE(rx51_dai),
.platform = &omap_soc_platform,
+};
+/* Audio subsystem */ +static struct snd_soc_device rx51_snd_devdata = {
.card = &rx51_sound_card,
.codec_dev = &soc_codec_dev_aic3x,
.codec_data = &rx51_aic34_setup,
+};
+static struct platform_device *rx51_snd_device;
+static int __init rx51_soc_init(void) +{
int err;
if (!machine_is_nokia_rx51())
return -ENODEV;
BUG_ON(gpio_request(RX51_CODEC_RESET_GPIO, NULL) < 0);
gpio_direction_output(RX51_CODEC_RESET_GPIO, 0);
gpio_set_value(RX51_CODEC_RESET_GPIO, 0);
You don't really need to set the gpio to 0 again, sine the gpio_direction_output is set the output to 0 already.
udelay(1);
gpio_set_value(RX51_CODEC_RESET_GPIO, 1);
msleep(1);
Another thing, which kind of bothers me is the handling of the reset GPIO for the aic3x (this in fact a general problem with the codec driver IMHO)...
The datasheet states, that after power up (voltage enable) a reset sequence is needed (keeping the RESET line low for 10ns) to make sure, that the codec is properly initialized. So I think this reset sequence need to be done in the codec driver instead of the machine.
Also, tlv320aic3x driver will try to set the defaults to the codec during the i2c probing. I'm not sure, but if the reset line is low at that point it may cause problems (reset line is low, and the reset sequence has not been followed). Than later in the machine driver the chip is taken out from reset, which might means, that the chip will be in reset state, so the initial configuration done by the codec driver might be lost.
I think it would be better to handle the reset GPIO within the codec driver at the end for proper operation.
What do you think?
rx51_snd_device = platform_device_alloc("soc-audio", -1);
if (!rx51_snd_device) {
err = -ENOMEM;
goto err1;
}
platform_set_drvdata(rx51_snd_device, &rx51_snd_devdata);
rx51_snd_devdata.dev = &rx51_snd_device->dev;
*(unsigned int *)rx51_dai[0].cpu_dai->private_data = 1; /* McBSP2
*/ +
err = platform_device_add(rx51_snd_device);
if (err)
goto err2;
return 0;
+err2:
platform_device_put(rx51_snd_device);
+err1:
gpio_free(RX51_CODEC_RESET_GPIO);
return err;
+}
+static void __exit rx51_soc_exit(void) +{
platform_device_unregister(rx51_snd_device);
gpio_free(RX51_CODEC_RESET_GPIO);
+}
+module_init(rx51_soc_init); +module_exit(rx51_soc_exit);
+MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("ALSA SoC Nokia RX-51");
+MODULE_LICENSE("GPL");
1.7.0
On Wed, 5 May 2010 09:30:22 +0300 Peter Ujfalusi peter.ujfalusi@nokia.com wrote:
Also, tlv320aic3x driver will try to set the defaults to the codec during the i2c probing. I'm not sure, but if the reset line is low at that point it may cause problems (reset line is low, and the reset sequence has not been followed). Than later in the machine driver the chip is taken out from reset, which might means, that the chip will be in reset state, so the initial configuration done by the codec driver might be lost.
I think it would be better to handle the reset GPIO within the codec driver at the end for proper operation.
What do you think?
Thanks! Definitely reset handling is better to move to codec driver. Especially important if starting to manage digital voltages there. I'll cook up updated versions.
On Wednesday 05 May 2010 09:48:29 ext Jarkko Nikula wrote:
Thanks! Definitely reset handling is better to move to codec driver. Especially important if starting to manage digital voltages there. I'll cook up updated versions.
The tlv320dac33 driver handles the reset GPIO as well. Luckily it does not need any specific sequence to be followed as the tlv320aic3x series does.
participants (2)
-
Jarkko Nikula
-
Peter Ujfalusi