[alsa-devel] [PATCH 1/8] ASoC: corgi: Automatically disconnect non-connected pins
All DAPM input and output pins of the wm8994 are either used in the card's DAPM routing table or are marked as not connected.
Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/corgi.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-)
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index b7cd0a7..3580d10 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -259,20 +259,6 @@ static const struct snd_kcontrol_new wm8731_corgi_controls[] = { corgi_set_spk), };
-/* - * Logic for a wm8731 as connected on a Sharp SL-C7x0 Device - */ -static int corgi_wm8731_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - snd_soc_dapm_nc_pin(dapm, "LLINEIN"); - snd_soc_dapm_nc_pin(dapm, "RLINEIN"); - - return 0; -} - /* corgi digital audio interface glue - connects codec <--> CPU */ static struct snd_soc_dai_link corgi_dai = { .name = "WM8731", @@ -281,7 +267,6 @@ static struct snd_soc_dai_link corgi_dai = { .codec_dai_name = "wm8731-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm8731.0-001b", - .init = corgi_wm8731_init, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ops = &corgi_ops, @@ -300,6 +285,7 @@ static struct snd_soc_card corgi = { .num_dapm_widgets = ARRAY_SIZE(wm8731_dapm_widgets), .dapm_routes = corgi_audio_map, .num_dapm_routes = ARRAY_SIZE(corgi_audio_map), + .fully_routed = true, };
static int corgi_probe(struct platform_device *pdev)
All DAPM input and output pins of the wm9705 are either used in the card's DAPM routing table or are marked as not connected.
Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/e740_wm9705.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c index 7c691aa..d72e124 100644 --- a/sound/soc/pxa/e740_wm9705.c +++ b/sound/soc/pxa/e740_wm9705.c @@ -88,24 +88,6 @@ static const struct snd_soc_dapm_route audio_map[] = { {"Mic Amp", NULL, "Mic (Internal)"}, };
-static int e740_ac97_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - snd_soc_dapm_nc_pin(dapm, "HPOUTL"); - snd_soc_dapm_nc_pin(dapm, "HPOUTR"); - snd_soc_dapm_nc_pin(dapm, "PHONE"); - snd_soc_dapm_nc_pin(dapm, "LINEINL"); - snd_soc_dapm_nc_pin(dapm, "LINEINR"); - snd_soc_dapm_nc_pin(dapm, "CDINL"); - snd_soc_dapm_nc_pin(dapm, "CDINR"); - snd_soc_dapm_nc_pin(dapm, "PCBEEP"); - snd_soc_dapm_nc_pin(dapm, "MIC2"); - - return 0; -} - static struct snd_soc_dai_link e740_dai[] = { { .name = "AC97", @@ -114,7 +96,6 @@ static struct snd_soc_dai_link e740_dai[] = { .codec_dai_name = "wm9705-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm9705-codec", - .init = e740_ac97_init, }, { .name = "AC97 Aux", @@ -136,6 +117,7 @@ static struct snd_soc_card e740 = { .num_dapm_widgets = ARRAY_SIZE(e740_dapm_widgets), .dapm_routes = audio_map, .num_dapm_routes = ARRAY_SIZE(audio_map), + .fully_routed = true, };
static struct gpio e740_audio_gpios[] = {
All DAPM input and output pins of the wm9705 are either used in the card's DAPM routing table or are marked as not connected.
Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/e750_wm9705.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c index 30544b6..48f2d7c 100644 --- a/sound/soc/pxa/e750_wm9705.c +++ b/sound/soc/pxa/e750_wm9705.c @@ -70,24 +70,6 @@ static const struct snd_soc_dapm_route audio_map[] = { {"MIC1", NULL, "Mic (Internal)"}, };
-static int e750_ac97_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - snd_soc_dapm_nc_pin(dapm, "LOUT"); - snd_soc_dapm_nc_pin(dapm, "ROUT"); - snd_soc_dapm_nc_pin(dapm, "PHONE"); - snd_soc_dapm_nc_pin(dapm, "LINEINL"); - snd_soc_dapm_nc_pin(dapm, "LINEINR"); - snd_soc_dapm_nc_pin(dapm, "CDINL"); - snd_soc_dapm_nc_pin(dapm, "CDINR"); - snd_soc_dapm_nc_pin(dapm, "PCBEEP"); - snd_soc_dapm_nc_pin(dapm, "MIC2"); - - return 0; -} - static struct snd_soc_dai_link e750_dai[] = { { .name = "AC97", @@ -96,7 +78,6 @@ static struct snd_soc_dai_link e750_dai[] = { .codec_dai_name = "wm9705-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm9705-codec", - .init = e750_ac97_init, /* use ops to check startup state */ }, { @@ -119,6 +100,7 @@ static struct snd_soc_card e750 = { .num_dapm_widgets = ARRAY_SIZE(e750_dapm_widgets), .dapm_routes = audio_map, .num_dapm_routes = ARRAY_SIZE(audio_map), + .fully_routed = true, };
static struct gpio e750_audio_gpios[] = {
All DAPM input and output pins of the ak4641 are either used in the card's DAPM routing table or are marked as not connected.
Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/hx4700.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c index ce26551..73eb5dd 100644 --- a/sound/soc/pxa/hx4700.c +++ b/sound/soc/pxa/hx4700.c @@ -127,15 +127,8 @@ static const struct snd_soc_dapm_route hx4700_audio_map[] = { static int hx4700_ak4641_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; int err;
- /* NC codec pins */ - /* FIXME: is anything connected here? */ - snd_soc_dapm_nc_pin(dapm, "MOUT1"); - snd_soc_dapm_nc_pin(dapm, "MICEXT"); - snd_soc_dapm_nc_pin(dapm, "AUX"); - /* Jack detection API stuff */ err = snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE, &hs_jack); @@ -184,6 +177,7 @@ static struct snd_soc_card snd_soc_card_hx4700 = { .num_dapm_widgets = ARRAY_SIZE(hx4700_dapm_widgets), .dapm_routes = hx4700_audio_map, .num_dapm_routes = ARRAY_SIZE(hx4700_audio_map), + .fully_routed = true, };
static struct gpio hx4700_audio_gpios[] = {
All DAPM input and output pins of the uda1380 are either used in the card's DAPM routing table or are marked as not connected.
Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/magician.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index 259e048..241d0be 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -391,25 +391,6 @@ static const struct snd_kcontrol_new uda1380_magician_controls[] = { magician_get_input, magician_set_input), };
-/* - * Logic for a uda1380 as connected on a HTC Magician - */ -static int magician_uda1380_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - /* NC codec pins */ - snd_soc_dapm_nc_pin(dapm, "VOUTLHP"); - snd_soc_dapm_nc_pin(dapm, "VOUTRHP"); - - /* FIXME: is anything connected here? */ - snd_soc_dapm_nc_pin(dapm, "VINL"); - snd_soc_dapm_nc_pin(dapm, "VINR"); - - return 0; -} - /* magician digital audio interface glue - connects codec <--> CPU */ static struct snd_soc_dai_link magician_dai[] = { { @@ -419,7 +400,6 @@ static struct snd_soc_dai_link magician_dai[] = { .codec_dai_name = "uda1380-hifi-playback", .platform_name = "pxa-pcm-audio", .codec_name = "uda1380-codec.0-0018", - .init = magician_uda1380_init, .ops = &magician_playback_ops, }, { @@ -446,6 +426,7 @@ static struct snd_soc_card snd_soc_card_magician = { .num_dapm_widgets = ARRAY_SIZE(uda1380_dapm_widgets), .dapm_routes = audio_map, .num_dapm_routes = ARRAY_SIZE(audio_map), + .fully_routed = true, };
static struct platform_device *magician_snd_device;
The microphone route has sink and source swapped.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/palm27x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index 1eebca2..5a0b82f 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -68,7 +68,7 @@ static const struct snd_soc_dapm_route audio_map[] = { {"Ext. Speaker", NULL, "ROUT2"},
/* mic connected to MIC1 */ - {"Ext. Microphone", NULL, "MIC1"}, + {"MIC1", NULL, "Ext. Microphone"}, };
static struct snd_soc_card palm27x_asoc;
All DAPM input and output pins of the wm9712 are either used in the card's DAPM routing table or are marked as not connected.
Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/palm27x.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index 5a0b82f..910336c 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -76,18 +76,8 @@ static struct snd_soc_card palm27x_asoc; static int palm27x_ac97_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; int err;
- /* not connected pins */ - snd_soc_dapm_nc_pin(dapm, "OUT3"); - snd_soc_dapm_nc_pin(dapm, "MONOOUT"); - snd_soc_dapm_nc_pin(dapm, "LINEINL"); - snd_soc_dapm_nc_pin(dapm, "LINEINR"); - snd_soc_dapm_nc_pin(dapm, "PCBEEP"); - snd_soc_dapm_nc_pin(dapm, "PHONE"); - snd_soc_dapm_nc_pin(dapm, "MIC2"); - /* Jack detection API stuff */ err = snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE, &hs_jack); @@ -133,7 +123,8 @@ static struct snd_soc_card palm27x_asoc = { .dapm_widgets = palm27x_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(palm27x_dapm_widgets), .dapm_routes = audio_map, - .num_dapm_routes = ARRAY_SIZE(audio_map) + .num_dapm_routes = ARRAY_SIZE(audio_map), + .fully_routed = true, };
static int palm27x_asoc_probe(struct platform_device *pdev)
All DAPM input and output pins of the wm8750 are either used in the card's DAPM routing table or are marked as not connected.
Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/pxa/spitz.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-)
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index a6d680a..461123a 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -256,26 +256,6 @@ static const struct snd_kcontrol_new wm8750_spitz_controls[] = { spitz_set_spk), };
-/* - * Logic for a wm8750 as connected on a Sharp SL-Cxx00 Device - */ -static int spitz_wm8750_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - /* NC codec pins */ - snd_soc_dapm_nc_pin(dapm, "RINPUT1"); - snd_soc_dapm_nc_pin(dapm, "LINPUT2"); - snd_soc_dapm_nc_pin(dapm, "RINPUT2"); - snd_soc_dapm_nc_pin(dapm, "LINPUT3"); - snd_soc_dapm_nc_pin(dapm, "RINPUT3"); - snd_soc_dapm_nc_pin(dapm, "OUT3"); - snd_soc_dapm_nc_pin(dapm, "MONO1"); - - return 0; -} - /* spitz digital audio interface glue - connects codec <--> CPU */ static struct snd_soc_dai_link spitz_dai = { .name = "wm8750", @@ -284,7 +264,6 @@ static struct snd_soc_dai_link spitz_dai = { .codec_dai_name = "wm8750-hifi", .platform_name = "pxa-pcm-audio", .codec_name = "wm8750.0-001b", - .init = spitz_wm8750_init, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ops = &spitz_ops, @@ -303,6 +282,7 @@ static struct snd_soc_card snd_soc_spitz = { .num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets), .dapm_routes = spitz_audio_map, .num_dapm_routes = ARRAY_SIZE(spitz_audio_map), + .fully_routed = true, };
static int spitz_probe(struct platform_device *pdev)
On Fri, Jan 09, 2015 at 10:03:26PM +0100, Lars-Peter Clausen wrote:
All DAPM input and output pins of the wm8994 are either used in the card's DAPM routing table or are marked as not connected.
Applied all, thanks.
participants (2)
-
Lars-Peter Clausen -
Mark Brown