[PATCH 0/3] ASoC: Intel: boards: updates for SOF boards
One new JasperLake configuration, core refactoring between RT1316 and RT1318 and a minor uninitialized variable corner case.
Bard Liao (1): ASoC: Intel: sof_realtek_common: set ret = 0 as initial value
Brent Lu (1): ASoC: Intel: sof_rt5682: add jsl_rt5682 board config
Gongjun Song (1): ASoC: Intel: sof_sdw: use common helpers for all Realtek amps
sound/soc/intel/boards/Makefile | 3 +- sound/soc/intel/boards/sof_realtek_common.c | 3 +- sound/soc/intel/boards/sof_rt5682.c | 6 + sound/soc/intel/boards/sof_sdw.c | 10 +- sound/soc/intel/boards/sof_sdw_common.h | 20 +- sound/soc/intel/boards/sof_sdw_rt1316.c | 239 ------------------ sound/soc/intel/boards/sof_sdw_rt1318.c | 120 --------- .../{sof_sdw_rt1308.c => sof_sdw_rt_amp.c} | 139 +++++++--- .../intel/common/soc-acpi-intel-jsl-match.c | 5 + 9 files changed, 133 insertions(+), 412 deletions(-) delete mode 100644 sound/soc/intel/boards/sof_sdw_rt1316.c delete mode 100644 sound/soc/intel/boards/sof_sdw_rt1318.c rename sound/soc/intel/boards/{sof_sdw_rt1308.c => sof_sdw_rt_amp.c} (59%)
From: Brent Lu brent.lu@intel.com
This configuration supports JSL boards which implement ALC5682I-VD/VS on SSP0 port.
Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Brent Lu brent.lu@intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/intel/boards/sof_rt5682.c | 6 ++++++ sound/soc/intel/common/soc-acpi-intel-jsl-match.c | 5 +++++ 2 files changed, 11 insertions(+)
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c index 4a2f91249b10c..2eabc4b0fafa4 100644 --- a/sound/soc/intel/boards/sof_rt5682.c +++ b/sound/soc/intel/boards/sof_rt5682.c @@ -1104,6 +1104,12 @@ static const struct platform_device_id board_ids[] = { SOF_RT5682_SSP_AMP(1) | SOF_RT5682_NUM_HDMIDEV(4)), }, + { + .name = "jsl_rt5682", + .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | + SOF_RT5682_MCLK_24MHZ | + SOF_RT5682_SSP_CODEC(0)), + }, { } }; MODULE_DEVICE_TABLE(platform, board_ids); diff --git a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c index b95c4b2cda947..f5c7e1bbded06 100644 --- a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c @@ -78,6 +78,11 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_jsl_machines[] = { .quirk_data = &mx98360a_spk, .sof_tplg_filename = "sof-jsl-rt5682-mx98360a.tplg", }, + { + .comp_ids = &rt5682_rt5682s_hp, + .drv_name = "jsl_rt5682", + .sof_tplg_filename = "sof-jsl-rt5682.tplg", + }, { .id = "10134242", .drv_name = "jsl_cs4242_mx98360a",
From: Gongjun Song gongjun.song@intel.com
sof_sdw_rt1308.c/sof_sdw_rt1316.c/sof_sdw_rt1318.c handle amp in basically the same way, optimized and merged into one file.
Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Signed-off-by: Gongjun Song gongjun.song@intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/intel/boards/Makefile | 3 +- sound/soc/intel/boards/sof_sdw.c | 10 +- sound/soc/intel/boards/sof_sdw_common.h | 20 +- sound/soc/intel/boards/sof_sdw_rt1316.c | 239 ------------------ sound/soc/intel/boards/sof_sdw_rt1318.c | 120 --------- .../{sof_sdw_rt1308.c => sof_sdw_rt_amp.c} | 139 +++++++--- 6 files changed, 120 insertions(+), 411 deletions(-) delete mode 100644 sound/soc/intel/boards/sof_sdw_rt1316.c delete mode 100644 sound/soc/intel/boards/sof_sdw_rt1318.c rename sound/soc/intel/boards/{sof_sdw_rt1308.c => sof_sdw_rt_amp.c} (59%)
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index 7e1a4ff77ac32..d1fd7a2b32dbc 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -37,8 +37,7 @@ snd-soc-sof_da7219_max98373-objs := sof_da7219_max98373.o snd-soc-ehl-rt5660-objs := ehl_rt5660.o snd-soc-sof-ssp-amp-objs := sof_ssp_amp.o snd-soc-sof-sdw-objs += sof_sdw.o \ - sof_sdw_max98373.o sof_sdw_rt1308.o \ - sof_sdw_rt1316.o sof_sdw_rt1318.o \ + sof_sdw_max98373.o sof_sdw_rt_amp.o \ sof_sdw_rt5682.o sof_sdw_rt700.o \ sof_sdw_rt711.o sof_sdw_rt711_sdca.o \ sof_sdw_rt715.o sof_sdw_rt715_sdca.o \ diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index b58c7b35599d2..d2ed807abde95 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -550,23 +550,23 @@ static struct sof_sdw_codec_info codec_info_list[] = { .direction = {true, false}, .dai_name = "rt1308-aif", .ops = &sof_sdw_rt1308_i2s_ops, - .init = sof_sdw_rt1308_init, - .exit = sof_sdw_rt1308_exit, + .init = sof_sdw_rt_amp_init, + .exit = sof_sdw_rt_amp_exit, .codec_type = SOF_SDW_CODEC_TYPE_AMP, }, { .part_id = 0x1316, .direction = {true, true}, .dai_name = "rt1316-aif", - .init = sof_sdw_rt1316_init, - .exit = sof_sdw_rt1316_exit, + .init = sof_sdw_rt_amp_init, + .exit = sof_sdw_rt_amp_exit, .codec_type = SOF_SDW_CODEC_TYPE_AMP, }, { .part_id = 0x1318, .direction = {true, true}, .dai_name = "rt1318-aif", - .init = sof_sdw_rt1318_init, + .init = sof_sdw_rt_amp_init, .codec_type = SOF_SDW_CODEC_TYPE_AMP, }, { diff --git a/sound/soc/intel/boards/sof_sdw_common.h b/sound/soc/intel/boards/sof_sdw_common.h index 54a50f7da4da7..350010b0e5f4f 100644 --- a/sound/soc/intel/boards/sof_sdw_common.h +++ b/sound/soc/intel/boards/sof_sdw_common.h @@ -125,30 +125,18 @@ int sof_sdw_rt700_init(struct snd_soc_card *card, struct sof_sdw_codec_info *info, bool playback);
-/* RT1308 support */ +/* RT1308 I2S support */ extern struct snd_soc_ops sof_sdw_rt1308_i2s_ops;
-int sof_sdw_rt1308_init(struct snd_soc_card *card, +/* generic amp support */ +int sof_sdw_rt_amp_init(struct snd_soc_card *card, const struct snd_soc_acpi_link_adr *link, struct snd_soc_dai_link *dai_links, struct sof_sdw_codec_info *info, bool playback); -int sof_sdw_rt1308_exit(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link); +int sof_sdw_rt_amp_exit(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link);
/* RT1316 support */ -int sof_sdw_rt1316_init(struct snd_soc_card *card, - const struct snd_soc_acpi_link_adr *link, - struct snd_soc_dai_link *dai_links, - struct sof_sdw_codec_info *info, - bool playback); -int sof_sdw_rt1316_exit(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link); - -/* RT1318 support */ -int sof_sdw_rt1318_init(struct snd_soc_card *card, - const struct snd_soc_acpi_link_adr *link, - struct snd_soc_dai_link *dai_links, - struct sof_sdw_codec_info *info, - bool playback);
/* RT715 support */ int sof_sdw_rt715_init(struct snd_soc_card *card, diff --git a/sound/soc/intel/boards/sof_sdw_rt1316.c b/sound/soc/intel/boards/sof_sdw_rt1316.c deleted file mode 100644 index f6bbea0d38105..0000000000000 --- a/sound/soc/intel/boards/sof_sdw_rt1316.c +++ /dev/null @@ -1,239 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Copyright (c) 2020 Intel Corporation - -/* - * sof_sdw_rt1316 - Helpers to handle RT1316 from generic machine driver - */ - -#include <linux/device.h> -#include <linux/errno.h> -#include <sound/control.h> -#include <sound/soc.h> -#include <sound/soc-acpi.h> -#include <sound/soc-dapm.h> -#include <linux/soundwire/sdw.h> -#include <linux/soundwire/sdw_type.h> -#include <linux/dmi.h> -#include "sof_sdw_common.h" -#include "sof_sdw_amp_coeff_tables.h" - -struct rt1316_platform_data { - const unsigned char *bq_params; - const unsigned int bq_params_cnt; -}; - -static const struct rt1316_platform_data dell_0b00_platform_data = { - .bq_params = dell_0b00_bq_params, - .bq_params_cnt = ARRAY_SIZE(dell_0b00_bq_params), -}; - -static const struct dmi_system_id dmi_platform_data[] = { - /* AlderLake devices */ - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), - DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0B00") - }, - .driver_data = (void *)&dell_0b00_platform_data, - }, - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), - DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0B01") - }, - .driver_data = (void *)&dell_0b00_platform_data, - }, - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), - DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0AFF") - }, - .driver_data = (void *)&dell_0b00_platform_data, - }, - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), - DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0AFE") - }, - .driver_data = (void *)&dell_0b00_platform_data, - }, -}; - -static int rt1316_add_device_props(struct device *sdw_dev) -{ - struct property_entry props[3] = {}; - struct fwnode_handle *fwnode; - const struct dmi_system_id *dmi_data; - const struct rt1316_platform_data *pdata; - unsigned char params[RT1316_MAX_BQ_REG]; - int ret; - - dmi_data = dmi_first_match(dmi_platform_data); - if (!dmi_data) - return 0; - - pdata = dmi_data->driver_data; - memcpy(¶ms, pdata->bq_params, sizeof(unsigned char) * pdata->bq_params_cnt); - - props[0] = PROPERTY_ENTRY_U8_ARRAY("realtek,bq-params", params); - props[1] = PROPERTY_ENTRY_U32("realtek,bq-params-cnt", pdata->bq_params_cnt); - - fwnode = fwnode_create_software_node(props, NULL); - if (IS_ERR(fwnode)) - return PTR_ERR(fwnode); - - ret = device_add_software_node(sdw_dev, to_software_node(fwnode)); - - fwnode_handle_put(fwnode); - - return ret; -} - -static const struct snd_soc_dapm_widget rt1316_widgets[] = { - SND_SOC_DAPM_SPK("Speaker", NULL), -}; - -/* - * dapm routes for rt1316 will be registered dynamically according - * to the number of rt1316 used. The first two entries will be registered - * for one codec case, and the last two entries are also registered - * if two 1316s are used. - */ -static const struct snd_soc_dapm_route rt1316_map[] = { - { "Speaker", NULL, "rt1316-1 SPOL" }, - { "Speaker", NULL, "rt1316-1 SPOR" }, - { "Speaker", NULL, "rt1316-2 SPOL" }, - { "Speaker", NULL, "rt1316-2 SPOR" }, -}; - -static const struct snd_kcontrol_new rt1316_controls[] = { - SOC_DAPM_PIN_SWITCH("Speaker"), -}; - -static int first_spk_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_card *card = rtd->card; - int ret; - - card->components = devm_kasprintf(card->dev, GFP_KERNEL, - "%s spk:rt1316", - card->components); - if (!card->components) - return -ENOMEM; - - ret = snd_soc_add_card_controls(card, rt1316_controls, - ARRAY_SIZE(rt1316_controls)); - if (ret) { - dev_err(card->dev, "rt1316 controls addition failed: %d\n", ret); - return ret; - } - - ret = snd_soc_dapm_new_controls(&card->dapm, rt1316_widgets, - ARRAY_SIZE(rt1316_widgets)); - if (ret) { - dev_err(card->dev, "rt1316 widgets addition failed: %d\n", ret); - return ret; - } - - ret = snd_soc_dapm_add_routes(&card->dapm, rt1316_map, 2); - if (ret) - dev_err(rtd->dev, "failed to add first SPK map: %d\n", ret); - - return ret; -} - -static int second_spk_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_card *card = rtd->card; - int ret; - - ret = snd_soc_dapm_add_routes(&card->dapm, rt1316_map + 2, 2); - if (ret) - dev_err(rtd->dev, "failed to add second SPK map: %d\n", ret); - - return ret; -} - -static int all_spk_init(struct snd_soc_pcm_runtime *rtd) -{ - int ret; - - ret = first_spk_init(rtd); - if (ret) - return ret; - - return second_spk_init(rtd); -} - -int sof_sdw_rt1316_exit(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link) -{ - struct mc_private *ctx = snd_soc_card_get_drvdata(card); - - if (ctx->amp_dev1) { - device_remove_software_node(ctx->amp_dev1); - put_device(ctx->amp_dev1); - } - - if (ctx->amp_dev2) { - device_remove_software_node(ctx->amp_dev2); - put_device(ctx->amp_dev2); - } - - return 0; -} - -int sof_sdw_rt1316_init(struct snd_soc_card *card, - const struct snd_soc_acpi_link_adr *link, - struct snd_soc_dai_link *dai_links, - struct sof_sdw_codec_info *info, - bool playback) -{ - struct mc_private *ctx = snd_soc_card_get_drvdata(card); - struct device *sdw_dev1, *sdw_dev2; - int ret; - - /* Count amp number and do init on playback link only. */ - if (!playback) - return 0; - - info->amp_num++; - if (info->amp_num == 1) - dai_links->init = first_spk_init; - - if (info->amp_num == 2) { - sdw_dev1 = bus_find_device_by_name(&sdw_bus_type, NULL, dai_links->codecs[0].name); - if (!sdw_dev1) - return -EPROBE_DEFER; - - ret = rt1316_add_device_props(sdw_dev1); - if (ret < 0) { - put_device(sdw_dev1); - return ret; - } - ctx->amp_dev1 = sdw_dev1; - - sdw_dev2 = bus_find_device_by_name(&sdw_bus_type, NULL, dai_links->codecs[1].name); - if (!sdw_dev2) - return -EPROBE_DEFER; - - ret = rt1316_add_device_props(sdw_dev2); - if (ret < 0) { - put_device(sdw_dev2); - return ret; - } - ctx->amp_dev2 = sdw_dev2; - - /* - * if two 1316s are in one dai link, the init function - * in this dai link will be first set for the first speaker, - * and it should be reset to initialize all speakers when - * the second speaker is found. - */ - if (dai_links->init) - dai_links->init = all_spk_init; - else - dai_links->init = second_spk_init; - } - - return 0; -} diff --git a/sound/soc/intel/boards/sof_sdw_rt1318.c b/sound/soc/intel/boards/sof_sdw_rt1318.c deleted file mode 100644 index dbee4bf5c8149..0000000000000 --- a/sound/soc/intel/boards/sof_sdw_rt1318.c +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Copyright (c) 2022 Intel Corporation - -/* - * sof_sdw_rt1318 - Helpers to handle RT1318 from generic machine driver - */ - -#include <linux/device.h> -#include <linux/errno.h> -#include <sound/control.h> -#include <sound/soc.h> -#include <sound/soc-acpi.h> -#include <sound/soc-dapm.h> -#include "sof_sdw_common.h" - -static const struct snd_soc_dapm_widget rt1318_widgets[] = { - SND_SOC_DAPM_SPK("Speaker", NULL), -}; - -/* - * dapm routes for rt1318 will be registered dynamically according - * to the number of rt1318 used. The first two entries will be registered - * for one codec case, and the last two entries are also registered - * if two 1318s are used. - */ -static const struct snd_soc_dapm_route rt1318_map[] = { - { "Speaker", NULL, "rt1318-1 SPOL" }, - { "Speaker", NULL, "rt1318-1 SPOR" }, - { "Speaker", NULL, "rt1318-2 SPOL" }, - { "Speaker", NULL, "rt1318-2 SPOR" }, -}; - -static const struct snd_kcontrol_new rt1318_controls[] = { - SOC_DAPM_PIN_SWITCH("Speaker"), -}; - -static int first_spk_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_card *card = rtd->card; - int ret; - - card->components = devm_kasprintf(card->dev, GFP_KERNEL, - "%s spk:rt1318", - card->components); - if (!card->components) - return -ENOMEM; - - ret = snd_soc_add_card_controls(card, rt1318_controls, - ARRAY_SIZE(rt1318_controls)); - if (ret) { - dev_err(card->dev, "rt1318 controls addition failed: %d\n", ret); - return ret; - } - - ret = snd_soc_dapm_new_controls(&card->dapm, rt1318_widgets, - ARRAY_SIZE(rt1318_widgets)); - if (ret) { - dev_err(card->dev, "rt1318 widgets addition failed: %d\n", ret); - return ret; - } - - ret = snd_soc_dapm_add_routes(&card->dapm, rt1318_map, 2); - if (ret) - dev_err(rtd->dev, "failed to add first SPK map: %d\n", ret); - - return ret; -} - -static int second_spk_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_card *card = rtd->card; - int ret; - - ret = snd_soc_dapm_add_routes(&card->dapm, rt1318_map + 2, 2); - if (ret) - dev_err(rtd->dev, "failed to add second SPK map: %d\n", ret); - - return ret; -} - -static int all_spk_init(struct snd_soc_pcm_runtime *rtd) -{ - int ret; - - ret = first_spk_init(rtd); - if (ret) - return ret; - - return second_spk_init(rtd); -} - -int sof_sdw_rt1318_init(struct snd_soc_card *card, - const struct snd_soc_acpi_link_adr *link, - struct snd_soc_dai_link *dai_links, - struct sof_sdw_codec_info *info, - bool playback) -{ - /* Count amp number and do init on playback link only. */ - if (!playback) - return 0; - - info->amp_num++; - if (info->amp_num == 1) - dai_links->init = first_spk_init; - - if (info->amp_num == 2) { - /* - * if two 1318s are in one dai link, the init function - * in this dai link will be first set for the first speaker, - * and it should be reset to initialize all speakers when - * the second speaker is found. - */ - if (dai_links->init) - dai_links->init = all_spk_init; - else - dai_links->init = second_spk_init; - } - - return 0; -} diff --git a/sound/soc/intel/boards/sof_sdw_rt1308.c b/sound/soc/intel/boards/sof_sdw_rt_amp.c similarity index 59% rename from sound/soc/intel/boards/sof_sdw_rt1308.c rename to sound/soc/intel/boards/sof_sdw_rt_amp.c index a19b055b9c6f8..26bf9e0dd3d24 100644 --- a/sound/soc/intel/boards/sof_sdw_rt1308.c +++ b/sound/soc/intel/boards/sof_sdw_rt_amp.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only -// Copyright (c) 2020 Intel Corporation +// Copyright (c) 2022 Intel Corporation
/* - * sof_sdw_rt1308 - Helpers to handle RT1308 from generic machine driver + * sof_sdw_rt_amp - Helpers to handle RT1308/RT1316/RT1318 from generic machine driver */
#include <linux/device.h> @@ -18,16 +18,26 @@ #include "sof_sdw_amp_coeff_tables.h" #include "../../codecs/rt1308.h"
-struct rt1308_platform_data { +#define CODEC_NAME_SIZE 7 + +/* choose a larger value to resolve compatibility issues */ +#define RT_AMP_MAX_BQ_REG RT1316_MAX_BQ_REG + +struct rt_amp_platform_data { const unsigned char *bq_params; const unsigned int bq_params_cnt; };
-static const struct rt1308_platform_data dell_0a5d_platform_data = { +static const struct rt_amp_platform_data dell_0a5d_platform_data = { .bq_params = dell_0a5d_bq_params, .bq_params_cnt = ARRAY_SIZE(dell_0a5d_bq_params), };
+static const struct rt_amp_platform_data dell_0b00_platform_data = { + .bq_params = dell_0b00_bq_params, + .bq_params_cnt = ARRAY_SIZE(dell_0b00_bq_params), +}; + static const struct dmi_system_id dmi_platform_data[] = { /* CometLake devices */ { @@ -59,15 +69,45 @@ static const struct dmi_system_id dmi_platform_data[] = { }, .driver_data = (void *)&dell_0a5d_platform_data, }, + /* AlderLake devices */ + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0B00") + }, + .driver_data = (void *)&dell_0b00_platform_data, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0B01") + }, + .driver_data = (void *)&dell_0b00_platform_data, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0AFF") + }, + .driver_data = (void *)&dell_0b00_platform_data, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0AFE") + }, + .driver_data = (void *)&dell_0b00_platform_data, + }, + {}, };
-static int rt1308_add_device_props(struct device *sdw_dev) +static int rt_amp_add_device_props(struct device *sdw_dev) { struct property_entry props[3] = {}; struct fwnode_handle *fwnode; const struct dmi_system_id *dmi_data; - const struct rt1308_platform_data *pdata; - unsigned char params[RT1308_MAX_BQ_REG]; + const struct rt_amp_platform_data *pdata; + unsigned char params[RT_AMP_MAX_BQ_REG]; int ret;
dmi_data = dmi_first_match(dmi_platform_data); @@ -91,15 +131,19 @@ static int rt1308_add_device_props(struct device *sdw_dev) return ret; }
-static const struct snd_soc_dapm_widget rt1308_widgets[] = { +static const struct snd_kcontrol_new rt_amp_controls[] = { + SOC_DAPM_PIN_SWITCH("Speaker"), +}; + +static const struct snd_soc_dapm_widget rt_amp_widgets[] = { SND_SOC_DAPM_SPK("Speaker", NULL), };
/* - * dapm routes for rt1308 will be registered dynamically according - * to the number of rt1308 used. The first two entries will be registered - * for one codec case, and the last two entries are also registered - * if two 1308s are used. + * dapm routes for rt1308/rt1316/rt1318 will be registered dynamically + * according to the number of rt1308/rt1316/rt1318 used. The first two + * entries will be registered for one codec case, and the last two entries + * are also registered if two 1308s/1316s/1318s are used. */ static const struct snd_soc_dapm_route rt1308_map[] = { { "Speaker", NULL, "rt1308-1 SPOL" }, @@ -108,36 +152,69 @@ static const struct snd_soc_dapm_route rt1308_map[] = { { "Speaker", NULL, "rt1308-2 SPOR" }, };
-static const struct snd_kcontrol_new rt1308_controls[] = { - SOC_DAPM_PIN_SWITCH("Speaker"), +static const struct snd_soc_dapm_route rt1316_map[] = { + { "Speaker", NULL, "rt1316-1 SPOL" }, + { "Speaker", NULL, "rt1316-1 SPOR" }, + { "Speaker", NULL, "rt1316-2 SPOL" }, + { "Speaker", NULL, "rt1316-2 SPOR" }, };
+static const struct snd_soc_dapm_route rt1318_map[] = { + { "Speaker", NULL, "rt1318-1 SPOL" }, + { "Speaker", NULL, "rt1318-1 SPOR" }, + { "Speaker", NULL, "rt1318-2 SPOL" }, + { "Speaker", NULL, "rt1318-2 SPOR" }, +}; + +static const struct snd_soc_dapm_route *get_codec_name_and_route(struct snd_soc_pcm_runtime *rtd, + char *codec_name) +{ + const char *dai_name; + + dai_name = rtd->dai_link->codecs->dai_name; + + /* get the codec name */ + snprintf(codec_name, CODEC_NAME_SIZE, "%s", dai_name); + + /* choose the right codec's map */ + if (strcmp(codec_name, "rt1308") == 0) + return rt1308_map; + else if (strcmp(codec_name, "rt1316") == 0) + return rt1316_map; + else + return rt1318_map; +} + static int first_spk_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_card *card = rtd->card; + const struct snd_soc_dapm_route *rt_amp_map; + char codec_name[CODEC_NAME_SIZE]; int ret;
+ rt_amp_map = get_codec_name_and_route(rtd, codec_name); + card->components = devm_kasprintf(card->dev, GFP_KERNEL, - "%s spk:rt1308", - card->components); + "%s spk:%s", + card->components, codec_name); if (!card->components) return -ENOMEM;
- ret = snd_soc_add_card_controls(card, rt1308_controls, - ARRAY_SIZE(rt1308_controls)); + ret = snd_soc_add_card_controls(card, rt_amp_controls, + ARRAY_SIZE(rt_amp_controls)); if (ret) { - dev_err(card->dev, "rt1308 controls addition failed: %d\n", ret); + dev_err(card->dev, "%s controls addition failed: %d\n", codec_name, ret); return ret; }
- ret = snd_soc_dapm_new_controls(&card->dapm, rt1308_widgets, - ARRAY_SIZE(rt1308_widgets)); + ret = snd_soc_dapm_new_controls(&card->dapm, rt_amp_widgets, + ARRAY_SIZE(rt_amp_widgets)); if (ret) { - dev_err(card->dev, "rt1308 widgets addition failed: %d\n", ret); + dev_err(card->dev, "%s widgets addition failed: %d\n", codec_name, ret); return ret; }
- ret = snd_soc_dapm_add_routes(&card->dapm, rt1308_map, 2); + ret = snd_soc_dapm_add_routes(&card->dapm, rt_amp_map, 2); if (ret) dev_err(rtd->dev, "failed to add first SPK map: %d\n", ret);
@@ -147,9 +224,13 @@ static int first_spk_init(struct snd_soc_pcm_runtime *rtd) static int second_spk_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_card *card = rtd->card; + const struct snd_soc_dapm_route *rt_amp_map; + char codec_name[CODEC_NAME_SIZE]; int ret;
- ret = snd_soc_dapm_add_routes(&card->dapm, rt1308_map + 2, 2); + rt_amp_map = get_codec_name_and_route(rtd, codec_name); + + ret = snd_soc_dapm_add_routes(&card->dapm, rt_amp_map + 2, 2); if (ret) dev_err(rtd->dev, "failed to add second SPK map: %d\n", ret);
@@ -204,7 +285,7 @@ struct snd_soc_ops sof_sdw_rt1308_i2s_ops = { .hw_params = rt1308_i2s_hw_params, };
-int sof_sdw_rt1308_exit(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link) +int sof_sdw_rt_amp_exit(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link) { struct mc_private *ctx = snd_soc_card_get_drvdata(card);
@@ -221,7 +302,7 @@ int sof_sdw_rt1308_exit(struct snd_soc_card *card, struct snd_soc_dai_link *dai_ return 0; }
-int sof_sdw_rt1308_init(struct snd_soc_card *card, +int sof_sdw_rt_amp_init(struct snd_soc_card *card, const struct snd_soc_acpi_link_adr *link, struct snd_soc_dai_link *dai_links, struct sof_sdw_codec_info *info, @@ -244,7 +325,7 @@ int sof_sdw_rt1308_init(struct snd_soc_card *card, if (!sdw_dev1) return -EPROBE_DEFER;
- ret = rt1308_add_device_props(sdw_dev1); + ret = rt_amp_add_device_props(sdw_dev1); if (ret < 0) { put_device(sdw_dev1); return ret; @@ -255,7 +336,7 @@ int sof_sdw_rt1308_init(struct snd_soc_card *card, if (!sdw_dev2) return -EPROBE_DEFER;
- ret = rt1308_add_device_props(sdw_dev2); + ret = rt_amp_add_device_props(sdw_dev2); if (ret < 0) { put_device(sdw_dev2); return ret; @@ -263,7 +344,7 @@ int sof_sdw_rt1308_init(struct snd_soc_card *card, ctx->amp_dev2 = sdw_dev2;
/* - * if two 1308s are in one dai link, the init function + * if two amps are in one dai link, the init function * in this dai link will be first set for the first speaker, * and it should be reset to initialize all speakers when * the second speaker is found.
From: Bard Liao yung-chuan.liao@linux.intel.com
'ret' will not be initialized if dai_fmt is not DSP_A or DSP_B.
Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/intel/boards/sof_realtek_common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/sof_realtek_common.c b/sound/soc/intel/boards/sof_realtek_common.c index ff2851fc8930a..6c12ca92f3713 100644 --- a/sound/soc/intel/boards/sof_realtek_common.c +++ b/sound/soc/intel/boards/sof_realtek_common.c @@ -267,7 +267,8 @@ static int rt1015_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); struct snd_soc_dai_link *dai_link = rtd->dai_link; struct snd_soc_dai *codec_dai; - int i, clk_freq, ret; + int i, clk_freq; + int ret = 0;
clk_freq = sof_dai_get_bclk(rtd);
On Tue, 06 Dec 2022 15:25:04 -0600, Pierre-Louis Bossart wrote:
One new JasperLake configuration, core refactoring between RT1316 and RT1318 and a minor uninitialized variable corner case.
Bard Liao (1): ASoC: Intel: sof_realtek_common: set ret = 0 as initial value
Brent Lu (1): ASoC: Intel: sof_rt5682: add jsl_rt5682 board config
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/3] ASoC: Intel: sof_rt5682: add jsl_rt5682 board config commit: c0660fce5e0672b9fcffaae02184d58c8ed2aec1 [2/3] ASoC: Intel: sof_sdw: use common helpers for all Realtek amps commit: 5c10da436ebd93f9bfa244ea933773d14b566499 [3/3] ASoC: Intel: sof_realtek_common: set ret = 0 as initial value commit: 47d2b66fec133cb27da3a551334686e465d19469
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Mark Brown -
Pierre-Louis Bossart