On Thu, Oct 12, 2017 at 09:44:37AM -0700, Chintan Patel wrote:

In case of failure in loading customize topology firmware, dfw_sst.bin gets loaded. However, current log provides this message as error even after successfully falling back to default topology "dfw_sst.bin".

Hence to convey proper message, changing log level and message.

Acked-By: Vinod Koul vinod.koul@intel.com

Signed-off-by: Chintan Patel chintan.m.patel@intel.com

Changes in v2: Addressing review comments from Takashi Iwai by changing loglevel as info

sound/soc/intel/skylake/skl-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 22f768ca3c73..12f383fd7c39 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -3404,7 +3404,7 @@ int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus)

ret = request_firmware(&fw, skl->tplg_name, bus->dev); if (ret < 0) {

• dev_err(bus->dev, "tplg fw %s load failed with %d\n",
  

• dev_info(bus->dev, "tplg fw %s load failed with %d, falling back to dfw_sst.bin",
  	skl->tplg_name, ret);
  

  ret = request_firmware(&fw, "dfw_sst.bin", bus->dev); if (ret < 0) {

-- 1.9.1