[alsa-devel] [PATCH v6 0/6] Implement generic ASoC HDMI codec and use it in tda998x
There is currently two other patch series[1][2] that depend on the three first (ALSA-) patches of this series. It would be nice to get at least those three applied sooner rather than later, so please tell me if I can do anything to get those in.
BTW, I applied the relevant patches from the two series to on top of this one. Obviously the two series conflicted with each other a bit and also the IEC958 helper patch from [2] conflicted with the IEC958 patch from my series (which is weird since Arnaud's series depends on my series...). After resolving the conflicts everything compiled fine, but for some reason neither the 'ELD' or IEC958 Playback Default' appeared on my BBB. I'll try to find time to debug this further at some point.
[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105509.html [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105502.html
Changes since v5 - Rebased on top of the latest drm-next branch - Allow 32 bit samplewidth in snd_pcm_create_iec958_consumer() and snd_pcm_create_iec958_consumer_hw_params() - Propose new simpler DT binding for tda998x audio - Squash tda998x audio DT binding together with hdmi-codec integration
Changes since RFC v4, - Rebased on top of the latest drm-next branch - Split the hdmi-codec abort functionality into a separate patch for better visibility of what it is all about - This does not affect the tda998x patches as the abort functionality is not used - Drop S18_3* formats from I2S_FORMATS and add a comment about formats not supported by HDMI
Changes since RFC v3, ASoC side: - Add "ALSA: pcm: add IEC958 channel status helper for hw_params" - Add "tda998x: Improve tda998x_configure_audio() audio related pdata" - use snd_pcm_create_iec958_consumer_hw_params() to construct the stream header - Remove set_clk() callback from hdmi-codec. It is not needed for now. - Refer to stream header in AIF as specified in HDMI standard - Set current_stream to NULL only after video side audio_shutdown() has been called. Avoid potential race if video side attempts to abort audio at the same time. - No need to have video side device pointer in the hdmi codec's pdata as it is found from dev->parent. - Fix hdmi-codec enum: DAI_ID_I2C > DAI_ID_I2S - Improve audio_startup API comment - Make improved checkpatch happy - BUG_ON > WARN_ON - put */ ending the block comment to a separate line
DRM side: - Fix tda998x get_eld() locking - Change tda998x audio parameters in pdata to more generic, that can be readily used in tda998x_audio_config() - Rename and restructure audio port related private data members to be more descriptive - Require audio configuration trough ASoC hdmi-codec if HDMI audio is configured trough DT binding.
DTS: - Increase McASP fifo usage form 1 to 32
Jyri Sarha (6): ALSA: pcm: add IEC958 channel status helper for hw_params ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders ASoC: hdmi-codec: Add audio abort() callback for video side to use drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding ARM: dts: am335x-boneblack: Add HDMI audio support
.../devicetree/bindings/display/bridge/tda998x.txt | 18 + arch/arm/boot/dts/am335x-boneblack.dts | 71 +++- drivers/gpu/drm/i2c/Kconfig | 1 + drivers/gpu/drm/i2c/tda998x_drv.c | 271 ++++++++++++-- include/drm/i2c/tda998x.h | 24 +- include/dt-bindings/display/tda998x.h | 7 + include/sound/hdmi-codec.h | 104 ++++++ include/sound/pcm_iec958.h | 2 + sound/core/pcm_iec958.c | 53 ++- sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/hdmi-codec.c | 411 +++++++++++++++++++++ 12 files changed, 898 insertions(+), 72 deletions(-) create mode 100644 include/dt-bindings/display/tda998x.h create mode 100644 include/sound/hdmi-codec.h create mode 100644 sound/soc/codecs/hdmi-codec.c
Add IEC958 channel status helper that gets the audio properties from snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to produce the channel status bits already in audio stream configuration phase.
Signed-off-by: Jyri Sarha jsarha@ti.com --- include/sound/pcm_iec958.h | 2 ++ sound/core/pcm_iec958.c | 53 +++++++++++++++++++++++++++++++--------------- 2 files changed, 38 insertions(+), 17 deletions(-)
diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h index 0eed397..36f023a 100644 --- a/include/sound/pcm_iec958.h +++ b/include/sound/pcm_iec958.h @@ -6,4 +6,6 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, size_t len);
+int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params, + u8 *cs, size_t len); #endif diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c index 36b2d7a..27e0981 100644 --- a/sound/core/pcm_iec958.c +++ b/sound/core/pcm_iec958.c @@ -9,30 +9,18 @@ #include <linux/types.h> #include <sound/asoundef.h> #include <sound/pcm.h> +#include <sound/pcm_params.h> #include <sound/pcm_iec958.h>
-/** - * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status - * @runtime: pcm runtime structure with ->rate filled in - * @cs: channel status buffer, at least four bytes - * @len: length of channel status buffer - * - * Create the consumer format channel status data in @cs of maximum size - * @len corresponding to the parameters of the PCM runtime @runtime. - * - * Drivers may wish to tweak the contents of the buffer after creation. - * - * Returns: length of buffer, or negative error code if something failed. - */ -int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, - size_t len) +static int create_iec958_consumer(uint rate, uint sample_width, + u8 *cs, size_t len) { unsigned int fs, ws;
if (len < 4) return -EINVAL;
- switch (runtime->rate) { + switch (rate) { case 32000: fs = IEC958_AES3_CON_FS_32000; break; @@ -59,7 +47,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, }
if (len > 4) { - switch (snd_pcm_format_width(runtime->format)) { + switch (sample_width) { case 16: ws = IEC958_AES4_CON_WORDLEN_20_16; break; @@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, IEC958_AES4_CON_MAX_WORDLEN_24; break; case 24: + case 32: /* Assume 24-bit width for 32-bit samples. */ ws = IEC958_AES4_CON_WORDLEN_24_20 | IEC958_AES4_CON_MAX_WORDLEN_24; break; @@ -92,4 +81,34 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
return len; } + +/** + * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status + * @runtime: pcm runtime structure with ->rate filled in + * @cs: channel status buffer, at least four bytes + * @len: length of channel status buffer + * + * Create the consumer format channel status data in @cs of maximum size + * @len corresponding to the parameters of the PCM runtime @runtime. + * + * Drivers may wish to tweak the contents of the buffer after creation. + * + * Returns: length of buffer, or negative error code if something failed. + */ +int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, + size_t len) +{ + return create_iec958_consumer(runtime->rate, + snd_pcm_format_width(runtime->format), + cs, len); +} EXPORT_SYMBOL(snd_pcm_create_iec958_consumer); + + +int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params, + u8 *cs, size_t len) +{ + return create_iec958_consumer(params_rate(params), params_width(params), + cs, len); +} +EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
Hello Jyri,
Acked-by: Arnaud Pouliquen arnaud.pouliquen@st.com
With few nitpicking remarks on form.
Regards Arnaud
On 03/08/2016 09:14 PM, Jyri Sarha wrote:
Add IEC958 channel status helper that gets the audio properties from snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to produce the channel status bits already in audio stream configuration phase.
Signed-off-by: Jyri Sarha jsarha@ti.com
include/sound/pcm_iec958.h | 2 ++ sound/core/pcm_iec958.c | 53 +++++++++++++++++++++++++++++++--------------- 2 files changed, 38 insertions(+), 17 deletions(-)
diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h index 0eed397..36f023a 100644 --- a/include/sound/pcm_iec958.h +++ b/include/sound/pcm_iec958.h @@ -6,4 +6,6 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, size_t len);
+int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
u8 *cs, size_t len);
#endif diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c index 36b2d7a..27e0981 100644 --- a/sound/core/pcm_iec958.c +++ b/sound/core/pcm_iec958.c @@ -9,30 +9,18 @@ #include <linux/types.h> #include <sound/asoundef.h> #include <sound/pcm.h> +#include <sound/pcm_params.h> #include <sound/pcm_iec958.h>
-/**
- snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
- @runtime: pcm runtime structure with ->rate filled in
- @cs: channel status buffer, at least four bytes
- @len: length of channel status buffer
- Create the consumer format channel status data in @cs of maximum size
- @len corresponding to the parameters of the PCM runtime @runtime.
- Drivers may wish to tweak the contents of the buffer after creation.
- Returns: length of buffer, or negative error code if something failed.
- */
-int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
- size_t len)
+static int create_iec958_consumer(uint rate, uint sample_width,
u8 *cs, size_t len)
{ unsigned int fs, ws;
if (len < 4) return -EINVAL;
- switch (runtime->rate) {
- switch (rate) { case 32000: fs = IEC958_AES3_CON_FS_32000; break;
@@ -59,7 +47,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, }
if (len > 4) {
switch (snd_pcm_format_width(runtime->format)) {
case 16: ws = IEC958_AES4_CON_WORDLEN_20_16; break;switch (sample_width) {
@@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, IEC958_AES4_CON_MAX_WORDLEN_24; break; case 24:
case 32: /* Assume 24-bit width for 32-bit samples. */ ws = IEC958_AES4_CON_WORDLEN_24_20 | IEC958_AES4_CON_MAX_WORDLEN_24; break;
@@ -92,4 +81,34 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
return len; }
+/**
- snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
- @runtime: pcm runtime structure with ->rate filled in
- @cs: channel status buffer, at least four bytes
- @len: length of channel status buffer
- Create the consumer format channel status data in @cs of maximum size
- @len corresponding to the parameters of the PCM runtime @runtime.
- Drivers may wish to tweak the contents of the buffer after creation.
- Returns: length of buffer, or negative error code if something failed.
- */
+int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
- size_t len)
should be aligned on parenthesis
+{
- return create_iec958_consumer(runtime->rate,
snd_pcm_format_width(runtime->format),
cs, len);
+} EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
No kernel-doc comment?
+int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
Could be snd_pcm_hw_params_create_iec958_consumer to be coherent with functions declared in pcm.h
u8 *cs, size_t len)
should be aligned on parenthesis
+{
- return create_iec958_consumer(params_rate(params), params_width(params),
cs, len);
+} +EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
On 03/09/16 12:08, Arnaud Pouliquen wrote:
Hello Jyri,
Acked-by: Arnaud Pouliquen arnaud.pouliquen@st.com
With few nitpicking remarks on form.
Regards Arnaud
On 03/08/2016 09:14 PM, Jyri Sarha wrote:
Add IEC958 channel status helper that gets the audio properties from snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to produce the channel status bits already in audio stream configuration phase.
Signed-off-by: Jyri Sarha jsarha@ti.com
include/sound/pcm_iec958.h | 2 ++ sound/core/pcm_iec958.c | 53 +++++++++++++++++++++++++++++++--------------- 2 files changed, 38 insertions(+), 17 deletions(-)
diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h index 0eed397..36f023a 100644 --- a/include/sound/pcm_iec958.h +++ b/include/sound/pcm_iec958.h @@ -6,4 +6,6 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, size_t len);
+int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
#endifu8 *cs, size_t len);
diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c index 36b2d7a..27e0981 100644 --- a/sound/core/pcm_iec958.c +++ b/sound/core/pcm_iec958.c @@ -9,30 +9,18 @@ #include <linux/types.h> #include <sound/asoundef.h> #include <sound/pcm.h> +#include <sound/pcm_params.h> #include <sound/pcm_iec958.h>
-/**
- snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
- @runtime: pcm runtime structure with ->rate filled in
- @cs: channel status buffer, at least four bytes
- @len: length of channel status buffer
- Create the consumer format channel status data in @cs of maximum size
- @len corresponding to the parameters of the PCM runtime @runtime.
- Drivers may wish to tweak the contents of the buffer after creation.
- Returns: length of buffer, or negative error code if something failed.
- */
-int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
- size_t len)
+static int create_iec958_consumer(uint rate, uint sample_width,
u8 *cs, size_t len)
{ unsigned int fs, ws;
if (len < 4) return -EINVAL;
- switch (runtime->rate) {
- switch (rate) { case 32000: fs = IEC958_AES3_CON_FS_32000; break;
@@ -59,7 +47,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, }
if (len > 4) {
switch (snd_pcm_format_width(runtime->format)) {
case 16: ws = IEC958_AES4_CON_WORDLEN_20_16; break;switch (sample_width) {
@@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs, IEC958_AES4_CON_MAX_WORDLEN_24; break; case 24:
case 32: /* Assume 24-bit width for 32-bit samples. */ ws = IEC958_AES4_CON_WORDLEN_24_20 | IEC958_AES4_CON_MAX_WORDLEN_24; break;
@@ -92,4 +81,34 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
return len; }
+/**
- snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
- @runtime: pcm runtime structure with ->rate filled in
- @cs: channel status buffer, at least four bytes
- @len: length of channel status buffer
- Create the consumer format channel status data in @cs of maximum size
- @len corresponding to the parameters of the PCM runtime @runtime.
- Drivers may wish to tweak the contents of the buffer after creation.
- Returns: length of buffer, or negative error code if something failed.
- */
+int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
- size_t len)
should be aligned on parenthesis
+{
- return create_iec958_consumer(runtime->rate,
snd_pcm_format_width(runtime->format),
cs, len);
+} EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
No kernel-doc comment?
Oh yes. It'll be mostly redundant with snd_pcm_create_iec958_consumer() but still it should be there.
+int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
Could be snd_pcm_hw_params_create_iec958_consumer to be coherent with functions declared in pcm.h
I feel that iec958 should be earlier in the name because it is the common denominator in this c-file. Then again I have no strong opinions about this.
u8 *cs, size_t len)
should be aligned on parenthesis
But it is. It just that the diff '+'-sign pushes the line above one char right, but the line bellow is not pushed because it indented with tabs (like it should be).
+{
- return create_iec958_consumer(params_rate(params), params_width(params),
cs, len);
+} +EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
On Tue, Mar 08, 2016 at 10:14:25PM +0200, Jyri Sarha wrote:
Add IEC958 channel status helper that gets the audio properties from snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to produce the channel status bits already in audio stream configuration phase.
Takashi, are you OK with this one?
The hdmi-codec is a platform device driver to be registered from drivers of external HDMI encoders with I2S and/or spdif interface. The driver in turn registers an ASoC codec for the HDMI encoder's audio functionality.
The structures and definitions in the API header are mostly redundant copies of similar structures in ASoC headers. This is on purpose to avoid direct dependencies to ASoC structures in video side driver.
Signed-off-by: Jyri Sarha jsarha@ti.com --- include/sound/hdmi-codec.h | 100 +++++++++++ sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/hdmi-codec.c | 393 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 501 insertions(+) create mode 100644 include/sound/hdmi-codec.h create mode 100644 sound/soc/codecs/hdmi-codec.c
diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h new file mode 100644 index 0000000..fc3a481 --- /dev/null +++ b/include/sound/hdmi-codec.h @@ -0,0 +1,100 @@ +/* + * hdmi-codec.h - HDMI Codec driver API + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Jyri Sarha jsarha@ti.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef __HDMI_CODEC_H__ +#define __HDMI_CODEC_H__ + +#include <linux/hdmi.h> +#include <drm/drm_edid.h> +#include <sound/asoundef.h> +#include <uapi/sound/asound.h> + +/* + * Protocol between ASoC cpu-dai and HDMI-encoder + */ +struct hdmi_codec_daifmt { + enum { + HDMI_I2S, + HDMI_RIGHT_J, + HDMI_LEFT_J, + HDMI_DSP_A, + HDMI_DSP_B, + HDMI_AC97, + HDMI_SPDIF, + } fmt; + int bit_clk_inv:1; + int frame_clk_inv:1; + int bit_clk_master:1; + int frame_clk_master:1; +}; + +/* + * HDMI audio parameters + */ +struct hdmi_codec_params { + struct hdmi_audio_infoframe cea; + struct snd_aes_iec958 iec; + int sample_rate; + int sample_width; + int channels; +}; + +struct hdmi_codec_ops { + /* + * Called when ASoC starts an audio stream setup. + * Optional + */ + int (*audio_startup)(struct device *dev); + + /* + * Configures HDMI-encoder for audio stream. + * Mandatory + */ + int (*hw_params)(struct device *dev, + struct hdmi_codec_daifmt *fmt, + struct hdmi_codec_params *hparms); + + /* + * Shuts down the audio stream. + * Mandatory + */ + void (*audio_shutdown)(struct device *dev); + + /* + * Mute/unmute HDMI audio stream. + * Optional + */ + int (*digital_mute)(struct device *dev, bool enable); + + /* + * Provides EDID-Like-Data from connected HDMI device. + * Optional + */ + int (*get_eld)(struct device *dev, uint8_t *buf, size_t len); +}; + +/* HDMI codec initalization data */ +struct hdmi_codec_pdata { + const struct hdmi_codec_ops *ops; + uint i2s:1; + uint spdif:1; + int max_i2s_channels; +}; + +#define HDMI_CODEC_DRV_NAME "hdmi-audio-codec" + +#endif /* __HDMI_CODEC_H__ */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 50693c8..62b62fe 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -86,6 +86,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MC13783 if MFD_MC13XXX select SND_SOC_ML26124 if I2C select SND_SOC_NAU8825 if I2C + select SND_SOC_HDMI_CODEC select SND_SOC_PCM1681 if I2C select SND_SOC_PCM179X if SPI_MASTER select SND_SOC_PCM3008 @@ -473,6 +474,11 @@ config SND_SOC_BT_SCO config SND_SOC_DMIC tristate
+config SND_SOC_HDMI_CODEC + tristate + select SND_PCM_ELD + select SND_PCM_IEC958 + config SND_SOC_ES8328 tristate "Everest Semi ES8328 CODEC"
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index d44f7d3..5f7b002 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -79,6 +79,7 @@ snd-soc-max9850-objs := max9850.o snd-soc-mc13783-objs := mc13783.o snd-soc-ml26124-objs := ml26124.o snd-soc-nau8825-objs := nau8825.o +snd-soc-hdmi-codec-objs := hdmi-codec.o snd-soc-pcm1681-objs := pcm1681.o snd-soc-pcm179x-codec-objs := pcm179x.o snd-soc-pcm3008-objs := pcm3008.o @@ -283,6 +284,7 @@ obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o +obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o obj-$(CONFIG_SND_SOC_PCM179X) += snd-soc-pcm179x-codec.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c new file mode 100644 index 0000000..bc47b9a --- /dev/null +++ b/sound/soc/codecs/hdmi-codec.c @@ -0,0 +1,393 @@ +/* + * ALSA SoC codec for HDMI encoder drivers + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Jyri Sarha jsarha@ti.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include <linux/module.h> +#include <linux/string.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/pcm_drm_eld.h> +#include <sound/hdmi-codec.h> +#include <sound/pcm_iec958.h> + +#include <drm/drm_crtc.h> /* This is only to get MAX_ELD_BYTES */ + +struct hdmi_codec_priv { + struct hdmi_codec_pdata hcd; + struct snd_soc_dai_driver *daidrv; + struct hdmi_codec_daifmt daifmt[2]; + struct mutex current_stream_lock; + struct snd_pcm_substream *current_stream; + struct snd_pcm_hw_constraint_list ratec; + uint8_t eld[MAX_ELD_BYTES]; +}; + +static const struct snd_soc_dapm_widget hdmi_widgets[] = { + SND_SOC_DAPM_OUTPUT("TX"), +}; + +static const struct snd_soc_dapm_route hdmi_routes[] = { + { "TX", NULL, "Playback" }, +}; + +enum { + DAI_ID_I2S = 0, + DAI_ID_SPDIF, +}; + +static int hdmi_codec_new_stream(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai); + int ret = 0; + + mutex_lock(&hcp->current_stream_lock); + if (!hcp->current_stream) { + hcp->current_stream = substream; + } else if (hcp->current_stream != substream) { + dev_err(dai->dev, "Only one simultaneous stream supported!\n"); + ret = -EINVAL; + } + mutex_unlock(&hcp->current_stream_lock); + + return ret; +} + +static int hdmi_codec_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai); + int ret = 0; + + dev_dbg(dai->dev, "%s()\n", __func__); + + ret = hdmi_codec_new_stream(substream, dai); + if (ret) + return ret; + + if (hcp->hcd.ops->audio_startup) { + ret = hcp->hcd.ops->audio_startup(dai->dev->parent); + if (ret) { + mutex_lock(&hcp->current_stream_lock); + hcp->current_stream = NULL; + mutex_unlock(&hcp->current_stream_lock); + return ret; + } + } + + if (hcp->hcd.ops->get_eld) { + ret = hcp->hcd.ops->get_eld(dai->dev->parent, hcp->eld, + sizeof(hcp->eld)); + + if (!ret) { + ret = snd_pcm_hw_constraint_eld(substream->runtime, + hcp->eld); + if (ret) + return ret; + } + } + return 0; +} + +static void hdmi_codec_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai); + + dev_dbg(dai->dev, "%s()\n", __func__); + + WARN_ON(hcp->current_stream != substream); + + hcp->hcd.ops->audio_shutdown(dai->dev->parent); + + mutex_lock(&hcp->current_stream_lock); + hcp->current_stream = NULL; + mutex_unlock(&hcp->current_stream_lock); +} + +static int hdmi_codec_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai); + struct hdmi_codec_params hp = { + .iec = { + .status = { 0 }, + .subcode = { 0 }, + .pad = 0, + .dig_subframe = { 0 }, + } + }; + int ret; + + dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__, + params_width(params), params_rate(params), + params_channels(params)); + + ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status, + sizeof(hp.iec.status)); + if (ret < 0) { + dev_err(dai->dev, "Creating IEC958 channel status failed %d\n", + ret); + return ret; + } + + ret = hdmi_codec_new_stream(substream, dai); + if (ret) + return ret; + + hdmi_audio_infoframe_init(&hp.cea); + hp.cea.channels = params_channels(params); + hp.cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM; + hp.cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM; + hp.cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM; + + hp.sample_width = params_width(params); + hp.sample_rate = params_rate(params); + hp.channels = params_channels(params); + + return hcp->hcd.ops->hw_params(dai->dev->parent, &hcp->daifmt[dai->id], + &hp); +} + +static int hdmi_codec_set_fmt(struct snd_soc_dai *dai, + unsigned int fmt) +{ + struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai); + struct hdmi_codec_daifmt cf = { 0 }; + int ret = 0; + + dev_dbg(dai->dev, "%s()\n", __func__); + + if (dai->id == DAI_ID_SPDIF) { + cf.fmt = HDMI_SPDIF; + } else { + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + cf.bit_clk_master = 1; + cf.frame_clk_master = 1; + break; + case SND_SOC_DAIFMT_CBS_CFM: + cf.frame_clk_master = 1; + break; + case SND_SOC_DAIFMT_CBM_CFS: + cf.bit_clk_master = 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + cf.frame_clk_inv = 1; + break; + case SND_SOC_DAIFMT_IB_NF: + cf.bit_clk_inv = 1; + break; + case SND_SOC_DAIFMT_IB_IF: + cf.frame_clk_inv = 1; + cf.bit_clk_inv = 1; + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + cf.fmt = HDMI_I2S; + break; + case SND_SOC_DAIFMT_DSP_A: + cf.fmt = HDMI_DSP_A; + break; + case SND_SOC_DAIFMT_DSP_B: + cf.fmt = HDMI_DSP_B; + break; + case SND_SOC_DAIFMT_RIGHT_J: + cf.fmt = HDMI_RIGHT_J; + break; + case SND_SOC_DAIFMT_LEFT_J: + cf.fmt = HDMI_LEFT_J; + break; + case SND_SOC_DAIFMT_AC97: + cf.fmt = HDMI_AC97; + break; + default: + dev_err(dai->dev, "Invalid DAI interface format\n"); + return -EINVAL; + } + } + + hcp->daifmt[dai->id] = cf; + + return ret; +} + +static int hdmi_codec_digital_mute(struct snd_soc_dai *dai, int mute) +{ + struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai); + + dev_dbg(dai->dev, "%s()\n", __func__); + + if (hcp->hcd.ops->digital_mute) + return hcp->hcd.ops->digital_mute(dai->dev->parent, mute); + + return 0; +} + +static const struct snd_soc_dai_ops hdmi_dai_ops = { + .startup = hdmi_codec_startup, + .shutdown = hdmi_codec_shutdown, + .hw_params = hdmi_codec_hw_params, + .set_fmt = hdmi_codec_set_fmt, + .digital_mute = hdmi_codec_digital_mute, +}; + + +#define HDMI_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\ + SNDRV_PCM_RATE_192000) + +#define SPDIF_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |\ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE |\ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE) + +/* + * This list is only for formats allowed on the I2S bus. So there is + * some formats listed that are not supported by HDMI interface. For + * instance allowing the 32-bit formats enables 24-precision with CPU + * DAIs that do not support 24-bit formats. If the extra formats cause + * problems, we should add the video side driver an option to disable + * them. + */ +#define I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |\ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE |\ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |\ + SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE) + +static struct snd_soc_dai_driver hdmi_i2s_dai = { + .name = "i2s-hifi", + .id = DAI_ID_I2S, + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 8, + .rates = HDMI_RATES, + .formats = I2S_FORMATS, + .sig_bits = 24, + }, + .ops = &hdmi_dai_ops, +}; + +static const struct snd_soc_dai_driver hdmi_spdif_dai = { + .name = "spdif-hifi", + .id = DAI_ID_SPDIF, + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = HDMI_RATES, + .formats = SPDIF_FORMATS, + }, + .ops = &hdmi_dai_ops, +}; + +static struct snd_soc_codec_driver hdmi_codec = { + .dapm_widgets = hdmi_widgets, + .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets), + .dapm_routes = hdmi_routes, + .num_dapm_routes = ARRAY_SIZE(hdmi_routes), +}; + +static int hdmi_codec_probe(struct platform_device *pdev) +{ + struct hdmi_codec_pdata *hcd = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct hdmi_codec_priv *hcp; + int dai_count, i = 0; + int ret; + + dev_dbg(dev, "%s()\n", __func__); + + if (!hcd) { + dev_err(dev, "%s: No plalform data\n", __func__); + return -EINVAL; + } + + dai_count = hcd->i2s + hcd->spdif; + if (dai_count < 1 || !hcd->ops || !hcd->ops->hw_params || + !hcd->ops->audio_shutdown) { + dev_err(dev, "%s: Invalid parameters\n", __func__); + return -EINVAL; + } + + hcp = devm_kzalloc(dev, sizeof(*hcp), GFP_KERNEL); + if (!hcp) + return -ENOMEM; + + hcp->hcd = *hcd; + mutex_init(&hcp->current_stream_lock); + + hcp->daidrv = devm_kzalloc(dev, dai_count * sizeof(*hcp->daidrv), + GFP_KERNEL); + if (!hcp->daidrv) + return -ENOMEM; + + if (hcd->i2s) { + hcp->daidrv[i] = hdmi_i2s_dai; + hcp->daidrv[i].playback.channels_max = + hcd->max_i2s_channels; + i++; + } + + if (hcd->spdif) + hcp->daidrv[i] = hdmi_spdif_dai; + + ret = snd_soc_register_codec(dev, &hdmi_codec, hcp->daidrv, + dai_count); + if (ret) { + dev_err(dev, "%s: snd_soc_register_codec() failed (%d)\n", + __func__, ret); + return ret; + } + + dev_set_drvdata(dev, hcp); + return 0; +} + +static int hdmi_codec_remove(struct platform_device *pdev) +{ + snd_soc_unregister_codec(&pdev->dev); + return 0; +} + +static struct platform_driver hdmi_codec_driver = { + .driver = { + .name = HDMI_CODEC_DRV_NAME, + }, + .probe = hdmi_codec_probe, + .remove = hdmi_codec_remove, +}; + +module_platform_driver(hdmi_codec_driver); + +MODULE_AUTHOR("Jyri Sarha jsarha@ti.com"); +MODULE_DESCRIPTION("HDMI Audio Codec Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" HDMI_CODEC_DRV_NAME);
Hello Jyri,
Tested with success on sti platform
Acked-by: Arnaud Pouliquen arnaud.pouliquen@st.com
Regards Arnaud
On 03/08/2016 09:14 PM, Jyri Sarha wrote:
The hdmi-codec is a platform device driver to be registered from drivers of external HDMI encoders with I2S and/or spdif interface. The driver in turn registers an ASoC codec for the HDMI encoder's audio functionality.
The structures and definitions in the API header are mostly redundant copies of similar structures in ASoC headers. This is on purpose to avoid direct dependencies to ASoC structures in video side driver.
Signed-off-by: Jyri Sarha jsarha@ti.com
include/sound/hdmi-codec.h | 100 +++++++++++ sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/hdmi-codec.c | 393 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 501 insertions(+) create mode 100644 include/sound/hdmi-codec.h create mode 100644 sound/soc/codecs/hdmi-codec.c
diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h new file mode 100644 index 0000000..fc3a481 --- /dev/null +++ b/include/sound/hdmi-codec.h @@ -0,0 +1,100 @@ +/*
- hdmi-codec.h - HDMI Codec driver API
- Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
- Author: Jyri Sarha jsarha@ti.com
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as published by the Free Software Foundation.
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
- */
+#ifndef __HDMI_CODEC_H__ +#define __HDMI_CODEC_H__
+#include <linux/hdmi.h> +#include <drm/drm_edid.h> +#include <sound/asoundef.h> +#include <uapi/sound/asound.h>
+/*
- Protocol between ASoC cpu-dai and HDMI-encoder
- */
+struct hdmi_codec_daifmt {
- enum {
HDMI_I2S,
HDMI_RIGHT_J,
HDMI_LEFT_J,
HDMI_DSP_A,
HDMI_DSP_B,
HDMI_AC97,
HDMI_SPDIF,
- } fmt;
- int bit_clk_inv:1;
- int frame_clk_inv:1;
- int bit_clk_master:1;
- int frame_clk_master:1;
+};
+/*
- HDMI audio parameters
- */
+struct hdmi_codec_params {
- struct hdmi_audio_infoframe cea;
- struct snd_aes_iec958 iec;
- int sample_rate;
- int sample_width;
- int channels;
+};
+struct hdmi_codec_ops {
- /*
* Called when ASoC starts an audio stream setup.
* Optional
*/
- int (*audio_startup)(struct device *dev);
- /*
* Configures HDMI-encoder for audio stream.
* Mandatory
*/
- int (*hw_params)(struct device *dev,
struct hdmi_codec_daifmt *fmt,
struct hdmi_codec_params *hparms);
- /*
* Shuts down the audio stream.
* Mandatory
*/
- void (*audio_shutdown)(struct device *dev);
- /*
* Mute/unmute HDMI audio stream.
* Optional
*/
- int (*digital_mute)(struct device *dev, bool enable);
- /*
* Provides EDID-Like-Data from connected HDMI device.
* Optional
*/
- int (*get_eld)(struct device *dev, uint8_t *buf, size_t len);
+};
+/* HDMI codec initalization data */ +struct hdmi_codec_pdata {
- const struct hdmi_codec_ops *ops;
- uint i2s:1;
- uint spdif:1;
- int max_i2s_channels;
+};
+#define HDMI_CODEC_DRV_NAME "hdmi-audio-codec"
+#endif /* __HDMI_CODEC_H__ */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 50693c8..62b62fe 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -86,6 +86,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MC13783 if MFD_MC13XXX select SND_SOC_ML26124 if I2C select SND_SOC_NAU8825 if I2C
- select SND_SOC_HDMI_CODEC select SND_SOC_PCM1681 if I2C select SND_SOC_PCM179X if SPI_MASTER select SND_SOC_PCM3008
@@ -473,6 +474,11 @@ config SND_SOC_BT_SCO config SND_SOC_DMIC tristate
+config SND_SOC_HDMI_CODEC
tristate
select SND_PCM_ELD
select SND_PCM_IEC958
config SND_SOC_ES8328 tristate "Everest Semi ES8328 CODEC"
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index d44f7d3..5f7b002 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -79,6 +79,7 @@ snd-soc-max9850-objs := max9850.o snd-soc-mc13783-objs := mc13783.o snd-soc-ml26124-objs := ml26124.o snd-soc-nau8825-objs := nau8825.o +snd-soc-hdmi-codec-objs := hdmi-codec.o snd-soc-pcm1681-objs := pcm1681.o snd-soc-pcm179x-codec-objs := pcm179x.o snd-soc-pcm3008-objs := pcm3008.o @@ -283,6 +284,7 @@ obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o +obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o obj-$(CONFIG_SND_SOC_PCM179X) += snd-soc-pcm179x-codec.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c new file mode 100644 index 0000000..bc47b9a --- /dev/null +++ b/sound/soc/codecs/hdmi-codec.c @@ -0,0 +1,393 @@ +/*
- ALSA SoC codec for HDMI encoder drivers
- Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
- Author: Jyri Sarha jsarha@ti.com
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as published by the Free Software Foundation.
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
- */
+#include <linux/module.h> +#include <linux/string.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/pcm_drm_eld.h> +#include <sound/hdmi-codec.h> +#include <sound/pcm_iec958.h>
+#include <drm/drm_crtc.h> /* This is only to get MAX_ELD_BYTES */
+struct hdmi_codec_priv {
- struct hdmi_codec_pdata hcd;
- struct snd_soc_dai_driver *daidrv;
- struct hdmi_codec_daifmt daifmt[2];
- struct mutex current_stream_lock;
- struct snd_pcm_substream *current_stream;
- struct snd_pcm_hw_constraint_list ratec;
- uint8_t eld[MAX_ELD_BYTES];
+};
+static const struct snd_soc_dapm_widget hdmi_widgets[] = {
- SND_SOC_DAPM_OUTPUT("TX"),
+};
+static const struct snd_soc_dapm_route hdmi_routes[] = {
- { "TX", NULL, "Playback" },
+};
+enum {
- DAI_ID_I2S = 0,
- DAI_ID_SPDIF,
+};
+static int hdmi_codec_new_stream(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
+{
- struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
- int ret = 0;
- mutex_lock(&hcp->current_stream_lock);
- if (!hcp->current_stream) {
hcp->current_stream = substream;
- } else if (hcp->current_stream != substream) {
dev_err(dai->dev, "Only one simultaneous stream supported!\n");
ret = -EINVAL;
- }
- mutex_unlock(&hcp->current_stream_lock);
- return ret;
+}
+static int hdmi_codec_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
+{
- struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
- int ret = 0;
- dev_dbg(dai->dev, "%s()\n", __func__);
- ret = hdmi_codec_new_stream(substream, dai);
- if (ret)
return ret;
- if (hcp->hcd.ops->audio_startup) {
ret = hcp->hcd.ops->audio_startup(dai->dev->parent);
if (ret) {
mutex_lock(&hcp->current_stream_lock);
hcp->current_stream = NULL;
mutex_unlock(&hcp->current_stream_lock);
return ret;
}
- }
- if (hcp->hcd.ops->get_eld) {
ret = hcp->hcd.ops->get_eld(dai->dev->parent, hcp->eld,
sizeof(hcp->eld));
if (!ret) {
ret = snd_pcm_hw_constraint_eld(substream->runtime,
hcp->eld);
if (ret)
return ret;
}
- }
- return 0;
+}
+static void hdmi_codec_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
+{
- struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
- dev_dbg(dai->dev, "%s()\n", __func__);
- WARN_ON(hcp->current_stream != substream);
- hcp->hcd.ops->audio_shutdown(dai->dev->parent);
- mutex_lock(&hcp->current_stream_lock);
- hcp->current_stream = NULL;
- mutex_unlock(&hcp->current_stream_lock);
+}
+static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
+{
- struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
- struct hdmi_codec_params hp = {
.iec = {
.status = { 0 },
.subcode = { 0 },
.pad = 0,
.dig_subframe = { 0 },
}
- };
- int ret;
- dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
params_width(params), params_rate(params),
params_channels(params));
- ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status,
sizeof(hp.iec.status));
- if (ret < 0) {
dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
ret);
return ret;
- }
- ret = hdmi_codec_new_stream(substream, dai);
- if (ret)
return ret;
- hdmi_audio_infoframe_init(&hp.cea);
- hp.cea.channels = params_channels(params);
- hp.cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
- hp.cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
- hp.cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
- hp.sample_width = params_width(params);
- hp.sample_rate = params_rate(params);
- hp.channels = params_channels(params);
- return hcp->hcd.ops->hw_params(dai->dev->parent, &hcp->daifmt[dai->id],
&hp);
+}
+static int hdmi_codec_set_fmt(struct snd_soc_dai *dai,
unsigned int fmt)
+{
- struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
- struct hdmi_codec_daifmt cf = { 0 };
- int ret = 0;
- dev_dbg(dai->dev, "%s()\n", __func__);
- if (dai->id == DAI_ID_SPDIF) {
cf.fmt = HDMI_SPDIF;
- } else {
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
cf.bit_clk_master = 1;
cf.frame_clk_master = 1;
break;
case SND_SOC_DAIFMT_CBS_CFM:
cf.frame_clk_master = 1;
break;
case SND_SOC_DAIFMT_CBM_CFS:
cf.bit_clk_master = 1;
break;
case SND_SOC_DAIFMT_CBS_CFS:
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_NB_IF:
cf.frame_clk_inv = 1;
break;
case SND_SOC_DAIFMT_IB_NF:
cf.bit_clk_inv = 1;
break;
case SND_SOC_DAIFMT_IB_IF:
cf.frame_clk_inv = 1;
cf.bit_clk_inv = 1;
break;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
cf.fmt = HDMI_I2S;
break;
case SND_SOC_DAIFMT_DSP_A:
cf.fmt = HDMI_DSP_A;
break;
case SND_SOC_DAIFMT_DSP_B:
cf.fmt = HDMI_DSP_B;
break;
case SND_SOC_DAIFMT_RIGHT_J:
cf.fmt = HDMI_RIGHT_J;
break;
case SND_SOC_DAIFMT_LEFT_J:
cf.fmt = HDMI_LEFT_J;
break;
case SND_SOC_DAIFMT_AC97:
cf.fmt = HDMI_AC97;
break;
default:
dev_err(dai->dev, "Invalid DAI interface format\n");
return -EINVAL;
}
- }
- hcp->daifmt[dai->id] = cf;
- return ret;
+}
+static int hdmi_codec_digital_mute(struct snd_soc_dai *dai, int mute) +{
- struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
- dev_dbg(dai->dev, "%s()\n", __func__);
- if (hcp->hcd.ops->digital_mute)
return hcp->hcd.ops->digital_mute(dai->dev->parent, mute);
- return 0;
+}
+static const struct snd_soc_dai_ops hdmi_dai_ops = {
- .startup = hdmi_codec_startup,
- .shutdown = hdmi_codec_shutdown,
- .hw_params = hdmi_codec_hw_params,
- .set_fmt = hdmi_codec_set_fmt,
- .digital_mute = hdmi_codec_digital_mute,
+};
+#define HDMI_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\
SNDRV_PCM_RATE_192000)
+#define SPDIF_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |\
SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE |\
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |\
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE)
+/*
- This list is only for formats allowed on the I2S bus. So there is
- some formats listed that are not supported by HDMI interface. For
- instance allowing the 32-bit formats enables 24-precision with CPU
- DAIs that do not support 24-bit formats. If the extra formats cause
- problems, we should add the video side driver an option to disable
- them.
- */
+#define I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |\
SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE |\
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |\
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |\
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE)
+static struct snd_soc_dai_driver hdmi_i2s_dai = {
- .name = "i2s-hifi",
- .id = DAI_ID_I2S,
- .playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 8,
.rates = HDMI_RATES,
.formats = I2S_FORMATS,
.sig_bits = 24,
- },
- .ops = &hdmi_dai_ops,
+};
+static const struct snd_soc_dai_driver hdmi_spdif_dai = {
- .name = "spdif-hifi",
- .id = DAI_ID_SPDIF,
- .playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.rates = HDMI_RATES,
.formats = SPDIF_FORMATS,
- },
- .ops = &hdmi_dai_ops,
+};
+static struct snd_soc_codec_driver hdmi_codec = {
- .dapm_widgets = hdmi_widgets,
- .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets),
- .dapm_routes = hdmi_routes,
- .num_dapm_routes = ARRAY_SIZE(hdmi_routes),
+};
+static int hdmi_codec_probe(struct platform_device *pdev) +{
- struct hdmi_codec_pdata *hcd = pdev->dev.platform_data;
- struct device *dev = &pdev->dev;
- struct hdmi_codec_priv *hcp;
- int dai_count, i = 0;
- int ret;
- dev_dbg(dev, "%s()\n", __func__);
- if (!hcd) {
dev_err(dev, "%s: No plalform data\n", __func__);
return -EINVAL;
- }
- dai_count = hcd->i2s + hcd->spdif;
- if (dai_count < 1 || !hcd->ops || !hcd->ops->hw_params ||
!hcd->ops->audio_shutdown) {
dev_err(dev, "%s: Invalid parameters\n", __func__);
return -EINVAL;
- }
- hcp = devm_kzalloc(dev, sizeof(*hcp), GFP_KERNEL);
- if (!hcp)
return -ENOMEM;
- hcp->hcd = *hcd;
- mutex_init(&hcp->current_stream_lock);
- hcp->daidrv = devm_kzalloc(dev, dai_count * sizeof(*hcp->daidrv),
GFP_KERNEL);
- if (!hcp->daidrv)
return -ENOMEM;
- if (hcd->i2s) {
hcp->daidrv[i] = hdmi_i2s_dai;
hcp->daidrv[i].playback.channels_max =
hcd->max_i2s_channels;
i++;
- }
- if (hcd->spdif)
hcp->daidrv[i] = hdmi_spdif_dai;
- ret = snd_soc_register_codec(dev, &hdmi_codec, hcp->daidrv,
dai_count);
- if (ret) {
dev_err(dev, "%s: snd_soc_register_codec() failed (%d)\n",
__func__, ret);
return ret;
- }
- dev_set_drvdata(dev, hcp);
- return 0;
+}
+static int hdmi_codec_remove(struct platform_device *pdev) +{
- snd_soc_unregister_codec(&pdev->dev);
- return 0;
+}
+static struct platform_driver hdmi_codec_driver = {
- .driver = {
.name = HDMI_CODEC_DRV_NAME,
- },
- .probe = hdmi_codec_probe,
- .remove = hdmi_codec_remove,
+};
+module_platform_driver(hdmi_codec_driver);
+MODULE_AUTHOR("Jyri Sarha jsarha@ti.com"); +MODULE_DESCRIPTION("HDMI Audio Codec Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" HDMI_CODEC_DRV_NAME);
Hi Jyri,
Am Dienstag, den 08.03.2016, 22:14 +0200 schrieb Jyri Sarha:
The hdmi-codec is a platform device driver to be registered from drivers of external HDMI encoders with I2S and/or spdif interface. The driver in turn registers an ASoC codec for the HDMI encoder's audio functionality.
The structures and definitions in the API header are mostly redundant copies of similar structures in ASoC headers. This is on purpose to avoid direct dependencies to ASoC structures in video side driver.
Signed-off-by: Jyri Sarha jsarha@ti.com
Tested-by: Philipp Zabel p.zabel@pengutronix.de on mt8173
regards Philipp
Hi Jyri,
Am Dienstag, den 08.03.2016, 22:14 +0200 schrieb Jyri Sarha:
The hdmi-codec is a platform device driver to be registered from drivers of external HDMI encoders with I2S and/or spdif interface. The driver in turn registers an ASoC codec for the HDMI encoder's audio functionality.
The structures and definitions in the API header are mostly redundant copies of similar structures in ASoC headers. This is on purpose to avoid direct dependencies to ASoC structures in video side driver.
Signed-off-by: Jyri Sarha jsarha@ti.com
Tested on mt8173, Acked-by: Philipp Zabel p.zabel@pengutronix.de
regards Philipp
Add audio abort() callback, that is provided at audio stream start, for video side. This is for video side to use in case there is a pressing need to tear down the audio playback for some reason.
Signed-off-by: Jyri Sarha jsarha@ti.com --- include/sound/hdmi-codec.h | 8 ++++++-- sound/soc/codecs/hdmi-codec.c | 20 +++++++++++++++++++- 2 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h index fc3a481..15fe70f 100644 --- a/include/sound/hdmi-codec.h +++ b/include/sound/hdmi-codec.h @@ -55,10 +55,14 @@ struct hdmi_codec_params {
struct hdmi_codec_ops { /* - * Called when ASoC starts an audio stream setup. + * Called when ASoC starts an audio stream setup. The call + * provides an audio abort callback for stoping an ongoing + * stream from video side driver if the HDMI audio becomes + * unavailable. * Optional */ - int (*audio_startup)(struct device *dev); + int (*audio_startup)(struct device *dev, + void (*abort_cb)(struct device *dev));
/* * Configures HDMI-encoder for audio stream. diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index bc47b9a..cc08097 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -47,6 +47,23 @@ enum { DAI_ID_SPDIF, };
+static void hdmi_codec_abort(struct device *dev) +{ + struct hdmi_codec_priv *hcp = dev_get_drvdata(dev); + + dev_dbg(dev, "%s()\n", __func__); + + mutex_lock(&hcp->current_stream_lock); + if (hcp->current_stream && hcp->current_stream->runtime && + snd_pcm_running(hcp->current_stream)) { + dev_info(dev, "HDMI audio playback aborted\n"); + snd_pcm_stream_lock_irq(hcp->current_stream); + snd_pcm_stop(hcp->current_stream, SNDRV_PCM_STATE_DISCONNECTED); + snd_pcm_stream_unlock_irq(hcp->current_stream); + } + mutex_unlock(&hcp->current_stream_lock); +} + static int hdmi_codec_new_stream(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -78,7 +95,8 @@ static int hdmi_codec_startup(struct snd_pcm_substream *substream, return ret;
if (hcp->hcd.ops->audio_startup) { - ret = hcp->hcd.ops->audio_startup(dai->dev->parent); + ret = hcp->hcd.ops->audio_startup(dai->dev->parent, + hdmi_codec_abort); if (ret) { mutex_lock(&hcp->current_stream_lock); hcp->current_stream = NULL;
Define struct tda998x_audio_params in include/drm/i2c/tda998x.h and use it in pdata and for tda998x_configure_audio() parameters. Also updates tda998x_write_aif() to take struct hdmi_audio_infoframe * directly as a parameter.
Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/i2c/tda998x_drv.c | 77 ++++++++++++++++++++------------------- include/drm/i2c/tda998x.h | 24 +++++++----- 2 files changed, 53 insertions(+), 48 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index b61282d..206df0b 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -41,7 +41,7 @@ struct tda998x_priv { u8 vip_cntrl_0; u8 vip_cntrl_1; u8 vip_cntrl_2; - struct tda998x_encoder_params params; + struct tda998x_audio_params audio_params;
wait_queue_head_t wq_edid; volatile int wq_edid_wait; @@ -666,26 +666,16 @@ tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr, reg_set(priv, REG_DIP_IF_FLAGS, bit); }
-static void -tda998x_write_aif(struct tda998x_priv *priv, struct tda998x_encoder_params *p) +static int tda998x_write_aif(struct tda998x_priv *priv, + struct hdmi_audio_infoframe *cea) { union hdmi_infoframe frame;
- hdmi_audio_infoframe_init(&frame.audio); - - frame.audio.channels = p->audio_frame[1] & 0x07; - frame.audio.channel_allocation = p->audio_frame[4]; - frame.audio.level_shift_value = (p->audio_frame[5] & 0x78) >> 3; - frame.audio.downmix_inhibit = (p->audio_frame[5] & 0x80) >> 7; - - /* - * L-PCM and IEC61937 compressed audio shall always set sample - * frequency to "refer to stream". For others, see the HDMI - * specification. - */ - frame.audio.sample_frequency = (p->audio_frame[2] & 0x1c) >> 2; + frame.audio = *cea;
tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, &frame); + + return 0; }
static void @@ -710,20 +700,21 @@ static void tda998x_audio_mute(struct tda998x_priv *priv, bool on) } }
-static void +static int tda998x_configure_audio(struct tda998x_priv *priv, - struct drm_display_mode *mode, struct tda998x_encoder_params *p) + struct tda998x_audio_params *params, + unsigned mode_clock) { u8 buf[6], clksel_aip, clksel_fs, cts_n, adiv; u32 n;
/* Enable audio ports */ - reg_write(priv, REG_ENA_AP, p->audio_cfg); - reg_write(priv, REG_ENA_ACLK, p->audio_clk_cfg); + reg_write(priv, REG_ENA_AP, params->config);
/* Set audio input source */ - switch (p->audio_format) { + switch (params->format) { case AFMT_SPDIF: + reg_write(priv, REG_ENA_ACLK, 0); reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF); clksel_aip = AIP_CLKSEL_AIP_SPDIF; clksel_fs = AIP_CLKSEL_FS_FS64SPDIF; @@ -731,15 +722,29 @@ tda998x_configure_audio(struct tda998x_priv *priv, break;
case AFMT_I2S: + reg_write(priv, REG_ENA_ACLK, 1); reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S); clksel_aip = AIP_CLKSEL_AIP_I2S; clksel_fs = AIP_CLKSEL_FS_ACLK; - cts_n = CTS_N_M(3) | CTS_N_K(3); + switch (params->sample_width) { + case 16: + cts_n = CTS_N_M(3) | CTS_N_K(1); + break; + case 18: + case 20: + case 24: + cts_n = CTS_N_M(3) | CTS_N_K(2); + break; + default: + case 32: + cts_n = CTS_N_M(3) | CTS_N_K(3); + break; + } break;
default: BUG(); - return; + return -EINVAL; }
reg_write(priv, REG_AIP_CLKSEL, clksel_aip); @@ -755,11 +760,11 @@ tda998x_configure_audio(struct tda998x_priv *priv, * assume 100MHz requires larger divider. */ adiv = AUDIO_DIV_SERCLK_8; - if (mode->clock > 100000) + if (mode_clock > 100000) adiv++; /* AUDIO_DIV_SERCLK_16 */
/* S/PDIF asks for a larger divider */ - if (p->audio_format == AFMT_SPDIF) + if (params->format == AFMT_SPDIF) adiv++; /* AUDIO_DIV_SERCLK_16 or _32 */
reg_write(priv, REG_AUDIO_DIV, adiv); @@ -768,7 +773,7 @@ tda998x_configure_audio(struct tda998x_priv *priv, * This is the approximate value of N, which happens to be * the recommended values for non-coherent clocks. */ - n = 128 * p->audio_sample_rate / 1000; + n = 128 * params->sample_rate / 1000;
/* Write the CTS and N values */ buf[0] = 0x44; @@ -787,19 +792,13 @@ tda998x_configure_audio(struct tda998x_priv *priv, reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
/* Write the channel status */ - buf[0] = IEC958_AES0_CON_NOT_COPYRIGHT; - buf[1] = 0x00; - buf[2] = IEC958_AES3_CON_FS_NOTID; - buf[3] = IEC958_AES4_CON_ORIGFS_NOTID | - IEC958_AES4_CON_MAX_WORDLEN_24; - reg_write_range(priv, REG_CH_STAT_B(0), buf, 4); + reg_write_range(priv, REG_CH_STAT_B(0), params->status, 4);
tda998x_audio_mute(priv, true); msleep(20); tda998x_audio_mute(priv, false);
- /* Write the audio information packet */ - tda998x_write_aif(priv, p); + return tda998x_write_aif(priv, ¶ms->cea); }
/* DRM encoder functions */ @@ -820,7 +819,7 @@ static void tda998x_encoder_set_config(struct tda998x_priv *priv, VIP_CNTRL_2_SWAP_F(p->swap_f) | (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
- priv->params = *p; + priv->audio_params = p->audio; }
static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode) @@ -1057,9 +1056,11 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
tda998x_write_avi(priv, adjusted_mode);
- if (priv->params.audio_cfg) - tda998x_configure_audio(priv, adjusted_mode, - &priv->params); + if (priv->audio_params.format != AFMT_UNUSED) { + tda998x_configure_audio(priv, + &priv->audio_params, + adjusted_mode->clock); + } } }
diff --git a/include/drm/i2c/tda998x.h b/include/drm/i2c/tda998x.h index 3e419d9..24be7aa 100644 --- a/include/drm/i2c/tda998x.h +++ b/include/drm/i2c/tda998x.h @@ -1,6 +1,19 @@ #ifndef __DRM_I2C_TDA998X_H__ #define __DRM_I2C_TDA998X_H__
+#define AFMT_UNUSED 0 +#define AFMT_SPDIF 1 +#define AFMT_I2S 2 + +struct tda998x_audio_params { + u8 config; + u8 format; + unsigned sample_width; + unsigned sample_rate; + struct hdmi_audio_infoframe cea; + u8 status[4]; +}; + struct tda998x_encoder_params { u8 swap_b:3; u8 mirr_b:1; @@ -15,16 +28,7 @@ struct tda998x_encoder_params { u8 swap_e:3; u8 mirr_e:1;
- u8 audio_cfg; - u8 audio_clk_cfg; - u8 audio_frame[6]; - - enum { - AFMT_SPDIF, - AFMT_I2S - } audio_format; - - unsigned audio_sample_rate; + struct tda998x_audio_params audio; };
#endif
Register ASoC HDMI codec for audio functionality and adds device tree binding for audio configuration.
With the registered HDMI codec the tda998x node can be used like a regular codec node in ASoC card configurations. HDMI audio info-frame and audio stream header is generated by the ASoC HDMI codec. The codec also applies constraints for available sample-rates based on Edid Like Data from the display. The device tree binding document has been updated [1].
Part of this patch has been inspired by Jean Francoise's "drm/i2c: tda998x: Add support of a DT graph of ports"-patch [2]. There may still be some identical lines left from the original patch and some of the ideas have come from there.
[1] Documentation/devicetree/bindings/display/bridge/tda998x.txt [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/095255.html
Signed-off-by: Jyri Sarha jsarha@ti.com --- .../devicetree/bindings/display/bridge/tda998x.txt | 18 ++ drivers/gpu/drm/i2c/Kconfig | 1 + drivers/gpu/drm/i2c/tda998x_drv.c | 194 ++++++++++++++++++++- include/drm/i2c/tda998x.h | 4 +- include/dt-bindings/display/tda998x.h | 7 + 5 files changed, 219 insertions(+), 5 deletions(-) create mode 100644 include/dt-bindings/display/tda998x.h
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt index e178e6b..816f6b5 100644 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt @@ -21,8 +21,19 @@ Optional properties: - video-ports: 24 bits value which defines how the video controller output is wired to the TDA998x input - default: <0x230145>
+ - audio-ports: array of 8-bit values, 2 values per one DAI[1]. + The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2]. + The second value defines the tda998x AP_ENA reg content when the DAI + in question is used. The implementation allows one or two DAIs. If two + DAIs are defined, they must be of different type. + +[1] Documentation/sound/alsa/soc/DAI.txt +[2] include/dt-bindings/display/tda998x.h + Example:
+#include <dt-bindings/display/tda998x.h> + tda998x: hdmi-encoder { compatible = "nxp,tda998x"; reg = <0x70>; @@ -30,4 +41,11 @@ Example: interrupts = <27 2>; /* falling edge */ pinctrl-0 = <&pmx_camera>; pinctrl-names = "default"; + video-ports = <0x230145>; + + #sound-dai-cells = <2>; + /* DAI-format AP_ENA reg value */ + audio-ports = < TDA998x_SPDIF 0x04 + TDA998x_I2S 0x03>; + }; diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig index 22c7ed6..088f278 100644 --- a/drivers/gpu/drm/i2c/Kconfig +++ b/drivers/gpu/drm/i2c/Kconfig @@ -28,6 +28,7 @@ config DRM_I2C_SIL164 config DRM_I2C_NXP_TDA998X tristate "NXP Semiconductors TDA998X HDMI encoder" default m if DRM_TILCDC + select SND_SOC_HDMI_CODEC if SND_SOC help Support for NXP Semiconductors TDA998X HDMI encoders.
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 206df0b..d5733436 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/irq.h> #include <sound/asoundef.h> +#include <sound/hdmi-codec.h>
#include <drm/drmP.h> #include <drm/drm_atomic_helper.h> @@ -30,6 +31,11 @@
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
+struct tda998x_audio_port { + u8 format; /* AFMT_xxx */ + u8 config; /* AP value */ +}; + struct tda998x_priv { struct i2c_client *cec; struct i2c_client *hdmi; @@ -43,6 +49,8 @@ struct tda998x_priv { u8 vip_cntrl_2; struct tda998x_audio_params audio_params;
+ struct platform_device *audio_pdev; + wait_queue_head_t wq_edid; volatile int wq_edid_wait;
@@ -53,6 +61,8 @@ struct tda998x_priv {
struct drm_encoder encoder; struct drm_connector connector; + + struct tda998x_audio_port audio_port[2]; };
#define conn_to_tda998x_priv(x) \ @@ -743,7 +753,7 @@ tda998x_configure_audio(struct tda998x_priv *priv, break;
default: - BUG(); + dev_err(&priv->hdmi->dev, "Unsupported I2S format\n"); return -EINVAL; }
@@ -1160,6 +1170,8 @@ static int tda998x_connector_get_modes(struct drm_connector *connector) drm_mode_connector_update_edid_property(connector, edid); n = drm_add_edid_modes(connector, edid); priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid); + drm_edid_to_eld(connector, edid); + kfree(edid);
return n; @@ -1181,6 +1193,9 @@ static void tda998x_destroy(struct tda998x_priv *priv) cec_write(priv, REG_CEC_RXSHPDINTENA, 0); reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
+ if (priv->audio_pdev) + platform_device_unregister(priv->audio_pdev); + if (priv->hdmi->irq) free_irq(priv->hdmi->irq, priv);
@@ -1190,8 +1205,175 @@ static void tda998x_destroy(struct tda998x_priv *priv) i2c_unregister_device(priv->cec); }
+static int tda998x_audio_hw_params(struct device *dev, + struct hdmi_codec_daifmt *daifmt, + struct hdmi_codec_params *params) +{ + struct tda998x_priv *priv = dev_get_drvdata(dev); + int i, ret; + struct tda998x_audio_params audio = { + .sample_width = params->sample_width, + .sample_rate = params->sample_rate, + .cea = params->cea, + }; + + if (!priv->encoder.crtc) + return -ENODEV; + + memcpy(audio.status, params->iec.status, + min(sizeof(audio.status), sizeof(params->iec.status))); + + switch (daifmt->fmt) { + case HDMI_I2S: + if (daifmt->bit_clk_inv || daifmt->frame_clk_inv || + daifmt->bit_clk_master || daifmt->frame_clk_master) { + dev_err(dev, "%s: Bad flags %d %d %d %d\n", __func__, + daifmt->bit_clk_inv, daifmt->frame_clk_inv, + daifmt->bit_clk_master, + daifmt->frame_clk_master); + return -EINVAL; + } + for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++) + if (priv->audio_port[i].format == AFMT_I2S) + audio.config = priv->audio_port[i].config; + audio.format = AFMT_I2S; + break; + case HDMI_SPDIF: + for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++) + if (priv->audio_port[i].format == AFMT_SPDIF) + audio.config = priv->audio_port[i].config; + audio.format = AFMT_SPDIF; + break; + default: + dev_err(dev, "%s: Invalid format %d\n", __func__, daifmt->fmt); + return -EINVAL; + } + + if (audio.config == 0) { + dev_err(dev, "%s: No audio configutation found\n", __func__); + return -EINVAL; + } + + ret = tda998x_configure_audio(priv, + &audio, + priv->encoder.crtc->hwmode.clock); + + return ret; +} + +static void tda998x_audio_shutdown(struct device *dev) +{ + struct tda998x_priv *priv = dev_get_drvdata(dev); + + reg_write(priv, REG_ENA_AP, 0); +} + +int tda998x_audio_digital_mute(struct device *dev, bool enable) +{ + struct tda998x_priv *priv = dev_get_drvdata(dev); + + tda998x_audio_mute(priv, enable); + + return 0; +} + +static int tda998x_audio_get_eld(struct device *dev, uint8_t *buf, size_t len) +{ + struct tda998x_priv *priv = dev_get_drvdata(dev); + struct drm_mode_config *config = &priv->encoder.dev->mode_config; + struct drm_connector *connector; + int ret = -ENODEV; + + mutex_lock(&config->mutex); + list_for_each_entry(connector, &config->connector_list, head) { + if (&priv->encoder == connector->encoder) { + memcpy(buf, connector->eld, + min(sizeof(connector->eld), len)); + ret = 0; + } + } + mutex_unlock(&config->mutex); + + return ret; +} + +static const struct hdmi_codec_ops audio_codec_ops = { + .hw_params = tda998x_audio_hw_params, + .audio_shutdown = tda998x_audio_shutdown, + .digital_mute = tda998x_audio_digital_mute, + .get_eld = tda998x_audio_get_eld, +}; + +static int tda998x_audio_codec_init(struct tda998x_priv *priv, + struct device *dev) +{ + struct hdmi_codec_pdata codec_data = { + .ops = &audio_codec_ops, + .max_i2s_channels = 2, + }; + int i; + + for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++) { + if (priv->audio_port[i].format == AFMT_I2S && + priv->audio_port[i].config != 0) + codec_data.i2s = 1; + if (priv->audio_port[i].format == AFMT_SPDIF && + priv->audio_port[i].config != 0) + codec_data.spdif = 1; + } + + priv->audio_pdev = platform_device_register_data( + dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO, + &codec_data, sizeof(codec_data)); + + if (IS_ERR(priv->audio_pdev)) + return PTR_ERR(priv->audio_pdev); + + return 0; +} + /* I2C driver functions */
+static int tda998x_get_audio_ports(struct tda998x_priv *priv, + struct device_node *np) +{ + const u32 *port_data; + u32 size; + int i; + + port_data = of_get_property(np, "audio-ports", &size); + size /= sizeof(u32); + + if (size > 2 * ARRAY_SIZE(priv->audio_port) || size % 2 != 0) { + dev_err(&priv->hdmi->dev, + "Bad number of elements in audio-ports dt-property\n"); + return -EINVAL; + } + + size /= 2; + + for (i = 0; i < size; i++) { + u8 afmt = be32_to_cpup(&port_data[2*i]); + u8 ap_ena = be32_to_cpup(&port_data[2*i+1]); + + if (afmt != AFMT_SPDIF && afmt != AFMT_I2S) { + dev_err(&priv->hdmi->dev, + "Bad audio format %u\n", afmt); + return -EINVAL; + } + + priv->audio_port[i].format = afmt; + priv->audio_port[i].config = ap_ena; + } + + if (priv->audio_port[0].format == priv->audio_port[1].format) { + dev_err(&priv->hdmi->dev, + "There can only be on I2S port and one SPDIF port\n"); + return -EINVAL; + } + return 0; +} + static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) { struct device_node *np = client->dev.of_node; @@ -1305,7 +1487,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) if (!np) return 0; /* non-DT */
- /* get the optional video properties */ + /* get the device tree parameters */ ret = of_property_read_u32(np, "video-ports", &video); if (ret == 0) { priv->vip_cntrl_0 = video >> 16; @@ -1313,8 +1495,14 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) priv->vip_cntrl_2 = video; }
- return 0; + ret = tda998x_get_audio_ports(priv, np); + if (ret) + goto fail;
+ if (priv->audio_port[0].format != 0) + tda998x_audio_codec_init(priv, &client->dev); + + return 0; fail: /* if encoder_init fails, the encoder slave is never registered, * so cleanup here: diff --git a/include/drm/i2c/tda998x.h b/include/drm/i2c/tda998x.h index 24be7aa..b575332 100644 --- a/include/drm/i2c/tda998x.h +++ b/include/drm/i2c/tda998x.h @@ -1,9 +1,9 @@ #ifndef __DRM_I2C_TDA998X_H__ #define __DRM_I2C_TDA998X_H__
+#include <dt-bindings/display/tda998x.h> + #define AFMT_UNUSED 0 -#define AFMT_SPDIF 1 -#define AFMT_I2S 2
struct tda998x_audio_params { u8 config; diff --git a/include/dt-bindings/display/tda998x.h b/include/dt-bindings/display/tda998x.h new file mode 100644 index 0000000..38ef741 --- /dev/null +++ b/include/dt-bindings/display/tda998x.h @@ -0,0 +1,7 @@ +#ifndef _DT_BINDINGS_TDA998X_H +#define _DT_BINDINGS_TDA998X_H + +#define AFMT_SPDIF 1 +#define AFMT_I2S 2 + +#endif /*_DT_BINDINGS_TDA998X_H */
drivers/gpu/drm/i2c/tda998x_drv.c:1329:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
CC: Jyri Sarha jsarha@ti.com Signed-off-by: Fengguang Wu fengguang.wu@intel.com ---
tda998x_drv.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -1326,10 +1326,7 @@ static int tda998x_audio_codec_init(stru dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO, &codec_data, sizeof(codec_data));
- if (IS_ERR(priv->audio_pdev)) - return PTR_ERR(priv->audio_pdev); - - return 0; + return PTR_ERR_OR_ZERO(priv->audio_pdev); }
/* I2C driver functions */
Hi Jyri,
[auto build test WARNING on drm/drm-next] [also build test WARNING on v4.5-rc7 next-20160308] [if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Jyri-Sarha/Implement-generic-ASoC-H... base: git://people.freedesktop.org/~airlied/linux.git drm-next
coccinelle warnings: (new ones prefixed by >>)
drivers/gpu/drm/i2c/tda998x_drv.c:1329:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Please review and possibly fold the followup patch.
--- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
Add HDMI audio support. Adds mcasp0_pins, clk_mcasp0_fixed, clk_mcasp0, mcasp0, sound node, and updates the tda19988 node to follow the new binding.
Signed-off-by: Jyri Sarha jsarha@ti.com --- arch/arm/boot/dts/am335x-boneblack.dts | 71 ++++++++++++++++++++++++++++++++-- 1 file changed, 67 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 55c0e95..2bae4d1 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -9,6 +9,7 @@
#include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +#include <dt-bindings/display/tda998x.h>
/ { model = "TI AM335x BeagleBone Black"; @@ -64,6 +65,16 @@ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ >; }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; };
&lcdc { @@ -76,16 +87,22 @@ };
&i2c0 { - tda19988 { + tda19988: tda19988 { compatible = "nxp,tda998x"; reg = <0x70>; + pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
- port { - hdmi_0: endpoint@0 { - remote-endpoint = <&lcdc_0>; + #sound-dai-cells = <0>; + audio-ports = < AFMT_I2S 0x03>; + + ports { + port@0 { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; }; }; }; @@ -94,3 +111,49 @@ &rtc { system-power-controller; }; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +/ { + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; +};
On Tue, Mar 08, 2016 at 10:14:24PM +0200, Jyri Sarha wrote:
There is currently two other patch series[1][2] that depend on the three first (ALSA-) patches of this series. It would be nice to get at least those three applied sooner rather than later, so please tell me if I can do anything to get those in.
It would be good if the people working on those other series could review this code then - there's no Reviwed-by or Acked-by on those patches or anything like that. This is what I mean about a lack of visible collaboration, there is no real enagagment that can be seen here.
On Tue, Mar 08, 2016 at 10:14:24PM +0200, Jyri Sarha wrote:
There is currently two other patch series[1][2] that depend on the
[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105509.html [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105502.html
Oh, and as usual please provide human readable descriptions of things especially for the benefit of those working offline or with spotty network connections.
participants (5)
-
Arnaud Pouliquen
-
Jyri Sarha
-
kbuild test robot
-
Mark Brown
-
Philipp Zabel