[alsa-devel] [PATCH 0/3] More simple-card dai node clock parameters
These changes target to sii9022 HDMI audio support, but are independent fixes and additions.
To cover more cases with simple-card it should be possible to select all parameters for set_sysclk() callback. The default behavior is not changed by these patches.
Jyri Sarha (3): ASoC: simple-card: Make u32 DT parameter handling 64-bit proof ASoC: simple-card: Add system-clock-direction DT parameter to dai nodes ASoC: simple-card: Add system-clock-id DT parameter to dai nodes
.../devicetree/bindings/sound/simple-card.txt | 3 ++ include/sound/simple_card.h | 2 ++ sound/soc/generic/simple-card.c | 31 +++++++++++++++----- 3 files changed, 29 insertions(+), 7 deletions(-)
Passing unsigned int pointers as u32 ponters may be dangerous on 64-bit system.
Signed-off-by: Jyri Sarha jsarha@ti.com --- sound/soc/generic/simple-card.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 03a7fdc..159e517f 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -116,6 +116,7 @@ asoc_simple_card_sub_parse_of(struct device_node *np, { struct device_node *node; struct clk *clk; + u32 val; int ret;
/* @@ -151,10 +152,8 @@ asoc_simple_card_sub_parse_of(struct device_node *np, }
dai->sysclk = clk_get_rate(clk); - } else if (of_property_read_bool(np, "system-clock-frequency")) { - of_property_read_u32(np, - "system-clock-frequency", - &dai->sysclk); + } else if (!of_property_read_u32(np, "system-clock-frequency", &val)) { + dai->sysclk = val; } else { clk = of_clk_get(node, 0); if (!IS_ERR(clk)) @@ -303,6 +302,7 @@ static int asoc_simple_card_parse_of(struct device_node *node, { struct snd_soc_dai_link *dai_link = priv->snd_card.dai_link; struct simple_dai_props *dai_props = priv->dai_props; + u32 val; int ret;
/* parsing the card name from DT */ @@ -325,8 +325,9 @@ static int asoc_simple_card_parse_of(struct device_node *node, }
/* Factor to mclk, used in hw_params() */ - of_property_read_u32(node, "simple-audio-card,mclk-fs", - &priv->mclk_fs); + ret = of_property_read_u32(node, "simple-audio-card,mclk-fs", &val); + if (ret == 0) + priv->mclk_fs = val;
dev_dbg(dev, "New simple-card: %s\n", priv->snd_card.name ? priv->snd_card.name : "");
Select dir parameters for set_sysclk calls in the card init phase.
Signed-off-by: Jyri Sarha jsarha@ti.com --- .../devicetree/bindings/sound/simple-card.txt | 1 + include/sound/simple_card.h | 1 + sound/soc/generic/simple-card.c | 14 +++++++++++++- 3 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index c2e9841..8460744 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -71,6 +71,7 @@ Optional CPU/CODEC subnodes properties: it can be specified via "clocks" if system has clock node (= common clock), or "system-clock-frequency" (if system doens't support common clock) +- system-clock-direction : "in" or "out", default "in"
Example 1 - single DAI link:
diff --git a/include/sound/simple_card.h b/include/sound/simple_card.h index 9b0ac77..6d74fef 100644 --- a/include/sound/simple_card.h +++ b/include/sound/simple_card.h @@ -18,6 +18,7 @@ struct asoc_simple_dai { const char *name; unsigned int fmt; unsigned int sysclk; + int sysclk_dir; int slots; int slot_width; }; diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 159e517f..8dd7957 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -64,7 +64,8 @@ static int __asoc_simple_card_dai_init(struct snd_soc_dai *dai, }
if (set->sysclk) { - ret = snd_soc_dai_set_sysclk(dai, 0, set->sysclk, 0); + ret = snd_soc_dai_set_sysclk(dai, 0, set->sysclk, + set->sysclk_dir); if (ret && ret != -ENOTSUPP) { dev_err(dai->dev, "simple-card: set_sysclk error\n"); goto err; @@ -116,6 +117,7 @@ asoc_simple_card_sub_parse_of(struct device_node *np, { struct device_node *node; struct clk *clk; + const char *str; u32 val; int ret;
@@ -138,6 +140,16 @@ asoc_simple_card_sub_parse_of(struct device_node *np, if (ret) return ret;
+ ret = of_property_read_string(np, "system-clock-direction", &str); + if (ret == 0) { + if (!strcmp(str, "out")) + dai->sysclk_dir = SND_SOC_CLOCK_OUT; + else if (!strcmp(str, "in")) + dai->sysclk_dir = SND_SOC_CLOCK_IN; + else + return -EINVAL; + } + /* * dai->sysclk come from * "clocks = <&xxx>" (if system has common clock)
Select clk_id parameters for set_sysclk calls in the card init phase.
Signed-off-by: Jyri Sarha jsarha@ti.com --- .../devicetree/bindings/sound/simple-card.txt | 2 ++ include/sound/simple_card.h | 1 + sound/soc/generic/simple-card.c | 6 +++++- 3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index 8460744..8877130 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -72,6 +72,8 @@ Optional CPU/CODEC subnodes properties: clock node (= common clock), or "system-clock-frequency" (if system doens't support common clock) - system-clock-direction : "in" or "out", default "in" +- system-clock-id : u32, clk_id parameter for set_sysclk, + default 0
Example 1 - single DAI link:
diff --git a/include/sound/simple_card.h b/include/sound/simple_card.h index 6d74fef..f3c7a30 100644 --- a/include/sound/simple_card.h +++ b/include/sound/simple_card.h @@ -19,6 +19,7 @@ struct asoc_simple_dai { unsigned int fmt; unsigned int sysclk; int sysclk_dir; + int sysclk_id; int slots; int slot_width; }; diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 8dd7957..f840d9c 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -64,7 +64,7 @@ static int __asoc_simple_card_dai_init(struct snd_soc_dai *dai, }
if (set->sysclk) { - ret = snd_soc_dai_set_sysclk(dai, 0, set->sysclk, + ret = snd_soc_dai_set_sysclk(dai, set->sysclk_id, set->sysclk, set->sysclk_dir); if (ret && ret != -ENOTSUPP) { dev_err(dai->dev, "simple-card: set_sysclk error\n"); @@ -150,6 +150,10 @@ asoc_simple_card_sub_parse_of(struct device_node *np, return -EINVAL; }
+ ret = of_property_read_u32(np, "system-clock-id", &val); + if (ret == 0) + dai->sysclk_id = val; + /* * dai->sysclk come from * "clocks = <&xxx>" (if system has common clock)
Hi
I have panda board (omap4430 http://www.ti.com/product/omap4430) , I am trying to debug omap4430 http://www.ti.com/product/omap4430 board using trace32 [Lauterbach].
Can you please provide procedure to debug u-boot code kernel code.
I had installed trace32 and PC is identifying trace32 through serial cable.
I wants to know steps to follow for debugging the boot code and kernel code.
I have gone through net, I came to know , need CMM scripts [board specfic CMM scripts]
can you please provide the same and further steps to debug the code.
Thank you in advance.
Regards
Satish.G
On Fri, Jun 13, 2014 at 3:34 PM, Jyri Sarha jsarha@ti.com wrote:
Select clk_id parameters for set_sysclk calls in the card init phase.
Signed-off-by: Jyri Sarha jsarha@ti.com
.../devicetree/bindings/sound/simple-card.txt | 2 ++ include/sound/simple_card.h | 1 + sound/soc/generic/simple-card.c | 6 +++++- 3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index 8460744..8877130 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -72,6 +72,8 @@ Optional CPU/CODEC subnodes properties: clock node (= common clock), or "system-clock-frequency" (if system doens't support common clock)
- system-clock-direction : "in" or "out", default "in"
+- system-clock-id : u32, clk_id parameter for set_sysclk,
default 0Example 1 - single DAI link:
diff --git a/include/sound/simple_card.h b/include/sound/simple_card.h index 6d74fef..f3c7a30 100644 --- a/include/sound/simple_card.h +++ b/include/sound/simple_card.h @@ -19,6 +19,7 @@ struct asoc_simple_dai { unsigned int fmt; unsigned int sysclk; int sysclk_dir;
int sysclk_id; int slots; int slot_width;}; diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 8dd7957..f840d9c 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -64,7 +64,7 @@ static int __asoc_simple_card_dai_init(struct snd_soc_dai *dai, }
if (set->sysclk) {
ret = snd_soc_dai_set_sysclk(dai, 0, set->sysclk,
ret = snd_soc_dai_set_sysclk(dai, set->sysclk_id,set->sysclk, set->sysclk_dir); if (ret && ret != -ENOTSUPP) { dev_err(dai->dev, "simple-card: set_sysclk error\n"); @@ -150,6 +150,10 @@ asoc_simple_card_sub_parse_of(struct device_node *np, return -EINVAL; }
ret = of_property_read_u32(np, "system-clock-id", &val);if (ret == 0)dai->sysclk_id = val;/* * dai->sysclk come from * "clocks = <&xxx>" (if system has common clock)-- 1.7.9.5
-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 13, 2014 at 01:04:38PM +0300, Jyri Sarha wrote:
Select clk_id parameters for set_sysclk calls in the card init phase.
This is making the ID defined by the drivers into ABI. It's not clear that this is something we want to do, and we certainly don't want to do it without updating the driver bindings. In principle what we want to do here is have our clocks handled by the clock API, though that's not trivial work.
On 06/21/2014 01:09 PM, Mark Brown wrote:
On Fri, Jun 13, 2014 at 01:04:38PM +0300, Jyri Sarha wrote:
Select clk_id parameters for set_sysclk calls in the card init phase.
This is making the ID defined by the drivers into ABI. It's not clear that this is something we want to do, and we certainly don't want to do it without updating the driver bindings. In principle what we want to do here is have our clocks handled by the clock API, though that's not trivial work.
I see, actually this is not something I would need anytime soon, but how about the previous "Add system-clock-direction DT parameter to dai nodes" patch?
There is a clear common definitions for clock direction, so this should be ok, right?
If the clock direction patch would go in I would not need to add more stuff to already quite messy davinci-evm driver.
Best regards, Jyri
On Tue, Jun 24, 2014 at 12:59:20PM +0300, Jyri Sarha wrote:
I see, actually this is not something I would need anytime soon, but how about the previous "Add system-clock-direction DT parameter to dai nodes" patch?
There is a clear common definitions for clock direction, so this should be ok, right?
If the clock direction patch would go in I would not need to add more stuff to already quite messy davinci-evm driver.
Yeah, I'm still thinking about that one. One thing I was wondering was if we should agree a definition that's generic with the clock API but then have an ASoC specific implementation for now until the clock API gets further along.
participants (3)
-
Jyri Sarha -
Mark Brown -
satish kumar