From: Arnd Bergmann arnd@arndb.de

Only one declaration from this header is actually used in drivers, so move that one into the global location and leave everything else private.

Acked-by: Robert Jarzmik robert.jarzmik@free.fr Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/generic.h | 6 +----- arch/arm/mach-pxa/include/mach/generic.h | 6 +++++- 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 3b7873f8e1f8..67925d3ea026 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -7,6 +7,7 @@ */

#include <linux/reboot.h> +#include <mach/generic.h>

struct irq_data;

@@ -71,8 +72,3 @@ extern unsigned pxa25x_get_clk_frequency_khz(int); #define pxa27x_get_clk_frequency_khz(x) (0) #endif

-#ifdef CONFIG_PXA3xx -extern unsigned pxa3xx_get_clk_frequency_khz(int); -#else -#define pxa3xx_get_clk_frequency_khz(x) (0) -#endif diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h index 665542e0c9e2..613f6a299d0d 100644 --- a/arch/arm/mach-pxa/include/mach/generic.h +++ b/arch/arm/mach-pxa/include/mach/generic.h @@ -1 +1,5 @@ -#include "../../generic.h" +#ifdef CONFIG_PXA3xx +extern unsigned pxa3xx_get_clk_frequency_khz(int); +#else +#define pxa3xx_get_clk_frequency_khz(x) (0) +#endif

From: Arnd Bergmann arnd@arndb.de

This is not used by any drivers, so make it private to the platform.

Acked-by: Robert Jarzmik robert.jarzmik@free.fr Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/{include/mach => }/regs-uart.h | 0 arch/arm/mach-pxa/viper.c | 2 +- arch/arm/mach-pxa/zeus.c | 2 +- 3 files changed, 2 insertions(+), 2 deletions(-) rename arch/arm/mach-pxa/{include/mach => }/regs-uart.h (100%)

diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/regs-uart.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/regs-uart.h rename to arch/arm/mach-pxa/regs-uart.h diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 3aa34e9a15d3..4b81c0117971 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -48,7 +48,7 @@ #include "pxa25x.h" #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/regs-uart.h> +#include "regs-uart.h" #include <linux/platform_data/pcmcia-pxa2xx_viper.h> #include "viper.h"

diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 97700429633e..5d02f10b5b5a 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -39,7 +39,7 @@

#include "pxa27x.h" #include "devices.h" -#include <mach/regs-uart.h> +#include "regs-uart.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmc-pxamci.h> #include "pxa27x-udc.h"

From: Arnd Bergmann arnd@arndb.de

The mach/hardware.h is included in lots of places, and it provides three different things on pxa:

- the cpu_is_pxa* macros - an indirect inclusion of mach/addr-map.h - the __REG() and io_pv2() helper macros

Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h headers, then change all the files that use mach/hardware.h to include the exact set of those three headers that they actually need, allowing for further more targeted cleanup.

linux/soc/pxa/cpu.h can remain permanently exported and is now in a global location along with similar headers. pxa-regs.h and addr-map.h are only used in a very small number of drivers now and can be moved to arch/arm/mach-pxa/ directly when those drivers are to pass the necessary data as resources.

Cc: Michael Turquette mturquette@baylibre.com Cc: Stephen Boyd sboyd@kernel.org Acked-by: Viresh Kumar viresh.kumar@linaro.org Acked-by: Dmitry Torokhov dmitry.torokhov@gmail.com Cc: Jacek Anaszewski jacek.anaszewski@gmail.com Cc: Pavel Machek pavel@ucw.cz Acked-by: Ulf Hansson ulf.hansson@linaro.org Cc: Dominik Brodowski linux@dominikbrodowski.net Acked-by: Alexandre Belloni alexandre.belloni@bootlin.com Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Guenter Roeck linux@roeck-us.net Acked-by: Mark Brown broonie@kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/common/locomo.c | 1 - arch/arm/common/sa1111.c | 5 +- arch/arm/mach-pxa/cm-x300.c | 2 + arch/arm/mach-pxa/colibri-evalboard.c | 1 - arch/arm/mach-pxa/colibri-pxa270-income.c | 1 - arch/arm/mach-pxa/colibri-pxa300.c | 1 + arch/arm/mach-pxa/colibri-pxa3xx.c | 1 - arch/arm/mach-pxa/corgi.c | 1 - arch/arm/mach-pxa/corgi_pm.c | 1 - arch/arm/mach-pxa/csb726.c | 1 + arch/arm/mach-pxa/devices.c | 2 +- arch/arm/mach-pxa/ezx.c | 1 - arch/arm/mach-pxa/generic.c | 3 +- arch/arm/mach-pxa/gumstix.c | 1 - arch/arm/mach-pxa/hx4700.c | 2 +- arch/arm/mach-pxa/idp.c | 1 - arch/arm/mach-pxa/include/mach/pxa-regs.h | 52 ++++++++++++++++ arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 2 +- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 2 +- arch/arm/mach-pxa/include/mach/regs-ac97.h | 2 +- arch/arm/mach-pxa/include/mach/regs-ost.h | 2 +- arch/arm/mach-pxa/include/mach/trizeps4.h | 1 + arch/arm/mach-pxa/irq.c | 3 +- arch/arm/mach-pxa/littleton.c | 1 - arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-pxa/lubbock.c | 1 - arch/arm/mach-pxa/magician.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/mfp-pxa2xx.c | 1 + arch/arm/mach-pxa/mfp-pxa3xx.c | 1 - arch/arm/mach-pxa/poodle.c | 1 - arch/arm/mach-pxa/pxa-regs.h | 1 + arch/arm/mach-pxa/pxa25x.c | 3 +- arch/arm/mach-pxa/pxa25x.h | 2 +- arch/arm/mach-pxa/pxa27x-udc.h | 2 + arch/arm/mach-pxa/pxa27x.c | 3 +- arch/arm/mach-pxa/pxa27x.h | 2 +- arch/arm/mach-pxa/pxa2xx.c | 1 - arch/arm/mach-pxa/pxa300.c | 1 + arch/arm/mach-pxa/pxa320.c | 1 + arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 3 +- arch/arm/mach-pxa/pxa3xx.h | 2 +- arch/arm/mach-pxa/pxa930.c | 1 + arch/arm/mach-pxa/regs-rtc.h | 2 +- arch/arm/mach-pxa/regs-uart.h | 2 + arch/arm/mach-pxa/sleep.S | 1 - arch/arm/mach-pxa/smemc.c | 2 +- arch/arm/mach-pxa/spitz_pm.c | 1 - arch/arm/mach-pxa/standby.S | 1 - arch/arm/mach-pxa/xcep.c | 2 +- arch/arm/mach-pxa/zylonite.c | 1 + arch/arm/mach-pxa/zylonite.h | 2 + arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + drivers/clk/pxa/clk-pxa3xx.c | 1 + drivers/cpufreq/pxa2xx-cpufreq.c | 1 + drivers/cpufreq/pxa3xx-cpufreq.c | 1 + drivers/input/mouse/pxa930_trkball.c | 1 - drivers/input/touchscreen/zylonite-wm97xx.c | 2 +- drivers/leds/leds-locomo.c | 1 - drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 - drivers/pcmcia/pxa2xx_base.c | 2 +- drivers/pcmcia/pxa2xx_sharpsl.c | 1 - drivers/pcmcia/sa1111_generic.c | 1 - drivers/pcmcia/sa1111_lubbock.c | 1 - drivers/pcmcia/soc_common.c | 2 - drivers/rtc/rtc-pxa.c | 2 - drivers/usb/host/ohci-pxa27x.c | 3 +- drivers/video/fbdev/pxafb.c | 2 +- drivers/watchdog/sa1100_wdt.c | 1 - .../hardware.h => include/linux/soc/pxa/cpu.h | 61 ++----------------- sound/arm/pxa2xx-ac97-lib.c | 1 + sound/soc/pxa/pxa2xx-ac97.c | 2 +- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/pxa/z2.c | 1 - 77 files changed, 116 insertions(+), 117 deletions(-) create mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h create mode 100644 arch/arm/mach-pxa/pxa-regs.h rename arch/arm/mach-pxa/include/mach/hardware.h => include/linux/soc/pxa/cpu.h (75%)

diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 24d21ba63030..da30a4d4f35c 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h>

-#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h>

diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 5367f03beb46..2343e2b6214d 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -26,13 +26,16 @@ #include <linux/clk.h> #include <linux/io.h>

-#include <mach/hardware.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> #include <linux/sizes.h>

#include <asm/hardware/sa1111.h>

+#ifdef CONFIG_ARCH_SA1100 +#include <mach/hardware.h> +#endif + /* SA1111 IRQs */ #define IRQ_GPAIN0 (0) #define IRQ_GPAIN1 (1) diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 2e35354b61f5..85e2537fdc15 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -40,6 +40,8 @@ #include <linux/spi/spi_gpio.h> #include <linux/spi/tdo24m.h>

+#include <linux/soc/pxa/cpu.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/setup.h> diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index b9c173ede891..b62af07b8f96 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -13,7 +13,6 @@ #include <linux/interrupt.h> #include <linux/gpio/machine.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/mach/arch.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-pxa.h> diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index e5879e8b0682..f6eaf464ca83 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -25,7 +25,6 @@ #include <asm/irq.h> #include <asm/mach-types.h>

-#include <mach/hardware.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pxa27x.h" diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 82052dfd96b6..4ceeea142bfd 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/interrupt.h> +#include <linux/soc/pxa/cpu.h>

#include <asm/mach-types.h> #include <linux/sizes.h> diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 3cead80a2b37..701dfef930eb 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -13,7 +13,6 @@ #include <linux/gpio.h> #include <linux/etherdevice.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/sizes.h> #include <asm/system_info.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 44659fbc37ba..f897762c8b58 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -39,7 +39,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h>

#include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 092dcb9fced5..ff1ac9bf37cb 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -19,7 +19,6 @@

#include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/hardware.h>

#include <mach/corgi.h> #include <mach/pxa2xx-regs.h> diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 98fcdc6e2944..d48493445ae5 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -17,6 +17,7 @@

#include <asm/mach-types.h> #include <asm/mach/arch.h> + #include "csb726.h" #include "pxa27x.h" #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 09b8495f3fd9..7ca97ddef6fe 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -9,6 +9,7 @@ #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/platform_data/i2c-pxa.h> +#include <linux/soc/pxa/cpu.h>

#include "udc.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h> @@ -20,7 +21,6 @@ #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/media/camera-pxa.h> #include <mach/audio.h> -#include <mach/hardware.h> #include <linux/platform_data/mmp_dma.h> #include <linux/platform_data/mtd-nand-pxa3xx.h>

diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index eb85950e7c0e..69c2ec02a16c 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -29,7 +29,6 @@ #include "pxa27x.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/hardware.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/media/camera-pxa.h>

diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index ab7cdffd7ea8..3c3cd90bb9b4 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -17,11 +17,12 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/soc/pxa/cpu.h>

-#include <mach/hardware.h> #include <asm/mach/map.h> #include <asm/mach-types.h>

+#include <mach/addr-map.h> #include <mach/irqs.h> #include <mach/reset.h> #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 49dd618b10f7..72b08a9bf0fd 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -28,7 +28,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h>

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index e1870fbb19e7..191a6c24fe19 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -36,11 +36,11 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/platform_data/i2c-pxa.h>

-#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h>

#include "pxa27x.h" +#include <mach/addr-map.h> #include <mach/hx4700.h> #include <linux/platform_data/irda-pxaficp.h>

diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index fb0850af8496..57c0511472bc 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -22,7 +22,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h>

#include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h new file mode 100644 index 000000000000..ba5120c06b8a --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + */ +#ifndef __ASM_MACH_PXA_REGS_H +#define __ASM_MACH_PXA_REGS_H + +/* + * Workarounds for at least 2 errata so far require this. + * The mapping is set in mach-pxa/generic.c. + */ +#define UNCACHED_PHYS_0 0xfe000000 +#define UNCACHED_PHYS_0_SIZE 0x00100000 + +/* + * Intel PXA2xx internal register mapping: + * + * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff + * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff + * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff + * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff + * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff + * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff + * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff + * + * Note that not all PXA2xx chips implement all those addresses, and the + * kernel only maps the minimum needed range of this mapping. + */ +#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) +#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) + +#ifndef __ASSEMBLY__ +# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) + +/* With indexed regs we don't want to feed the index through io_p2v() + especially if it is a variable, otherwise horrible code will result. */ +# define __REG2(x,y) \ + (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) + +# define __PREG(x) (io_v2p((u32)&(x))) + +#else + +# define __REG(x) io_p2v(x) +# define __PREG(x) io_v2p(x) + +#endif + + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index fa121e135915..f68b573ab4a0 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -11,7 +11,7 @@ #ifndef __PXA2XX_REGS_H #define __PXA2XX_REGS_H

-#include <mach/hardware.h> +#include "pxa-regs.h"

/* * Power Manager diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index 070f6c74196e..8eb1ba533e1c 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -10,7 +10,7 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H

-#include <mach/hardware.h> +#include "pxa-regs.h"

/* * Oscillator Configuration Register (OSCC) diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h index 1db96fd4df32..ec09b9635e25 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ac97.h +++ b/arch/arm/mach-pxa/include/mach/regs-ac97.h @@ -2,7 +2,7 @@ #ifndef __ASM_ARCH_REGS_AC97_H #define __ASM_ARCH_REGS_AC97_H

-#include <mach/hardware.h> +#include "pxa-regs.h"

/* * AC97 Controller registers diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h index deb564ed8ee7..109d0ed264df 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ost.h +++ b/arch/arm/mach-pxa/include/mach/regs-ost.h @@ -2,7 +2,7 @@ #ifndef __ASM_MACH_REGS_OST_H #define __ASM_MACH_REGS_OST_H

-#include <mach/hardware.h> +#include "pxa-regs.h"

/* * OS Timer & Match Registers diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h index 3cddb1428c5e..27926629f9c6 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -11,6 +11,7 @@ #ifndef _TRIPEPS4_H_ #define _TRIPEPS4_H_

+#include <mach/addr-map.h> #include "irqs.h" /* PXA_GPIO_TO_IRQ */

/* physical memory regions */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 74efc3ab595f..f25c30e8a834 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -17,13 +17,14 @@ #include <linux/irq.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/soc/pxa/cpu.h>

#include <asm/exception.h>

-#include <mach/hardware.h> #include <mach/irqs.h>

#include "generic.h" +#include "pxa-regs.h"

#define ICIP (0x000) #define ICMR (0x004) diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 73f5953b3bb6..f98dc61e87af 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -31,7 +31,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h>

#include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6fc40bc06910..eac32bd9e385 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -28,7 +28,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h>

@@ -39,6 +38,7 @@

#include "pxa27x.h" #include "lpd270.h" +#include <mach/addr-map.h> #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e2411971422d..72816e7c206f 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -34,7 +34,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h>

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 200fd35168e0..345a44d15a2c 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -29,12 +29,12 @@ #include <linux/regulator/machine.h> #include <linux/platform_data/i2c-pxa.h>

-#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/system_info.h>

#include "pxa27x.h" +#include <mach/addr-map.h> #include <mach/magician.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 997f6e502201..cf74adfe65df 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -35,7 +35,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h>

@@ -52,6 +51,7 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> +#include <mach/addr-map.h> #include <mach/smemc.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 6a5451b186c2..6bc7206fd2ac 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/syscore_ops.h> +#include <linux/soc/pxa/cpu.h>

#include <mach/pxa2xx-regs.h> #include "mfp-pxa2xx.h" diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index 56114df9700d..f26b5e5412cf 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -16,7 +16,6 @@ #include <linux/io.h> #include <linux/syscore_ops.h>

-#include <mach/hardware.h> #include "mfp-pxa3xx.h" #include <mach/pxa3xx-regs.h>

diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 58cfa434afde..ca52882433d4 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -30,7 +30,6 @@ #include <linux/mtd/sharpsl.h> #include <linux/memblock.h>

-#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/setup.h> diff --git a/arch/arm/mach-pxa/pxa-regs.h b/arch/arm/mach-pxa/pxa-regs.h new file mode 100644 index 000000000000..584d2ac592cc --- /dev/null +++ b/arch/arm/mach-pxa/pxa-regs.h @@ -0,0 +1 @@ +#include <mach/pxa-regs.h> diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 0d25cc45f825..305047ebd2f1 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -26,14 +26,15 @@ #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h>

#include <asm/mach/map.h> #include <asm/suspend.h> -#include <mach/hardware.h> #include <mach/irqs.h> #include "pxa25x.h" #include <mach/reset.h> #include "pm.h" +#include <mach/addr-map.h> #include <mach/smemc.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h index b58d0fbdb4db..403bc16c2ed2 100644 --- a/arch/arm/mach-pxa/pxa25x.h +++ b/arch/arm/mach-pxa/pxa25x.h @@ -2,7 +2,7 @@ #ifndef __MACH_PXA25x_H #define __MACH_PXA25x_H

-#include <mach/hardware.h> +#include <mach/addr-map.h> #include <mach/pxa2xx-regs.h> #include "mfp-pxa25x.h" #include <mach/irqs.h> diff --git a/arch/arm/mach-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h index faf73804697f..2d3df3b1cb68 100644 --- a/arch/arm/mach-pxa/pxa27x-udc.h +++ b/arch/arm/mach-pxa/pxa27x-udc.h @@ -2,6 +2,8 @@ #ifndef _ASM_ARCH_PXA27X_UDC_H #define _ASM_ARCH_PXA27X_UDC_H

+#include "pxa-regs.h" + #ifdef _ASM_ARCH_PXA25X_UDC_H #error You cannot include both PXA25x and PXA27x UDC support #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index f7e89831e85b..a81ac88ecbfd 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -23,9 +23,9 @@ #include <linux/irq.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h>

#include <asm/mach/map.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/suspend.h> #include <mach/irqs.h> @@ -33,6 +33,7 @@ #include <mach/reset.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" +#include <mach/addr-map.h> #include <mach/smemc.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h index abdc02fb4f03..6c99090647d2 100644 --- a/arch/arm/mach-pxa/pxa27x.h +++ b/arch/arm/mach-pxa/pxa27x.h @@ -3,7 +3,7 @@ #define __MACH_PXA27x_H

#include <linux/suspend.h> -#include <mach/hardware.h> +#include <mach/addr-map.h> #include <mach/pxa2xx-regs.h> #include "mfp-pxa27x.h" #include <mach/irqs.h> diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 2d26cd2afbf3..ac72acb43e26 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -12,7 +12,6 @@ #include <linux/device.h> #include <linux/io.h>

-#include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include "mfp-pxa25x.h" #include <mach/reset.h> diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 7f2f5a6a2263..f77ec118d5b9 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/soc/pxa/cpu.h>

#include "pxa300.h"

diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 78abcc741df7..e372e6c118de 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/soc/pxa/cpu.h>

#include "pxa320.h"

diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index 4bd7da1f8657..c29a7f0fa1b0 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -21,8 +21,8 @@ #include <linux/clk.h> #include <linux/usb.h> #include <linux/usb/otg.h> +#include <linux/soc/pxa/cpu.h>

-#include <mach/hardware.h> #include "regs-u2d.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h>

diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 6eb1c24d7395..fc84aed99481 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,14 +24,15 @@ #include <linux/syscore_ops.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h>

#include <asm/mach/map.h> #include <asm/suspend.h> -#include <mach/hardware.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" +#include <mach/addr-map.h> #include <mach/smemc.h> #include <mach/irqs.h>

diff --git a/arch/arm/mach-pxa/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h index 6d4502aa9d06..22ace053ea25 100644 --- a/arch/arm/mach-pxa/pxa3xx.h +++ b/arch/arm/mach-pxa/pxa3xx.h @@ -2,7 +2,7 @@ #ifndef __MACH_PXA3XX_H #define __MACH_PXA3XX_H

-#include <mach/hardware.h> +#include <mach/addr-map.h> #include <mach/pxa3xx-regs.h> #include <mach/irqs.h>

diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index bf91de4267e5..b9021a40cbd1 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -13,6 +13,7 @@ #include <linux/irq.h> #include <linux/gpio-pxa.h> #include <linux/platform_device.h> +#include <linux/soc/pxa/cpu.h>

#include "pxa930.h"

diff --git a/arch/arm/mach-pxa/regs-rtc.h b/arch/arm/mach-pxa/regs-rtc.h index b1f9ff14e335..96255a0f595e 100644 --- a/arch/arm/mach-pxa/regs-rtc.h +++ b/arch/arm/mach-pxa/regs-rtc.h @@ -2,7 +2,7 @@ #ifndef __ASM_MACH_REGS_RTC_H #define __ASM_MACH_REGS_RTC_H

-#include <mach/hardware.h> +#include "pxa-regs.h"

/* * Real Time Clock diff --git a/arch/arm/mach-pxa/regs-uart.h b/arch/arm/mach-pxa/regs-uart.h index 9a168f83afeb..490e9ca16297 100644 --- a/arch/arm/mach-pxa/regs-uart.h +++ b/arch/arm/mach-pxa/regs-uart.h @@ -2,6 +2,8 @@ #ifndef __ASM_ARCH_REGS_UART_H #define __ASM_ARCH_REGS_UART_H

+#include "pxa-regs.h" + /* * UARTs */ diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 6c5b3ffd2cd3..272efeb954f4 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -13,7 +13,6 @@

#include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h> #include <mach/smemc.h> #include <mach/pxa2xx-regs.h>

diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 32e82cc92ea5..47b99549d616 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -8,8 +8,8 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/syscore_ops.h> +#include <linux/soc/pxa/cpu.h>

-#include <mach/hardware.h> #include <mach/smemc.h>

#ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 25a1f8c5a738..201dabe883b6 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -18,7 +18,6 @@

#include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/hardware.h>

#include <mach/spitz.h> #include "pxa27x.h" diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index eab1645bb4ad..626fecdefb1c 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -11,7 +11,6 @@

#include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h>

#include <mach/pxa2xx-regs.h>

diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index f485146b899f..e6ab428287ae 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -24,8 +24,8 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h>

-#include <mach/hardware.h> #include "pxa25x.h" +#include <mach/addr-map.h> #include <mach/smemc.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 79f0025fa17a..9bcb81688201 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -20,6 +20,7 @@ #include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> +#include <linux/soc/pxa/cpu.h>

#include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/zylonite.h b/arch/arm/mach-pxa/zylonite.h index 7300ec2aac0d..afe3efcb8e04 100644 --- a/arch/arm/mach-pxa/zylonite.h +++ b/arch/arm/mach-pxa/zylonite.h @@ -2,6 +2,8 @@ #ifndef __ASM_ARCH_ZYLONITE_H #define __ASM_ARCH_ZYLONITE_H

+#include <linux/soc/pxa/cpu.h> + #define ZYLONITE_ETH_PHYS 0x14000000

#define EXT_GPIO(x) (128 + (x)) diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 956fec1c4940..50a8a3547dbc 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -17,6 +17,7 @@ #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> #include <linux/gpio.h> +#include <linux/soc/pxa/cpu.h>

#include "pxa300.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 94cb834f36cd..67cab4f1194b 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/soc/pxa/cpu.h>

#include "pxa320.h" #include "zylonite.h" diff --git a/drivers/clk/pxa/clk-pxa3xx.c b/drivers/clk/pxa/clk-pxa3xx.c index 60db92772e72..027b78183565 100644 --- a/drivers/clk/pxa/clk-pxa3xx.c +++ b/drivers/clk/pxa/clk-pxa3xx.c @@ -14,6 +14,7 @@ #include <linux/clk-provider.h> #include <linux/clkdev.h> #include <linux/of.h> +#include <linux/soc/pxa/cpu.h> #include <mach/smemc.h> #include <mach/pxa3xx-regs.h>

diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index f0b6f52eb2c3..0f0e676ff781 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -24,6 +24,7 @@ #include <linux/cpufreq.h> #include <linux/err.h> #include <linux/regulator/consumer.h> +#include <linux/soc/pxa/cpu.h> #include <linux/io.h>

#include <mach/pxa2xx-regs.h> diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c index 32f993c94675..d3b398b4aa6a 100644 --- a/drivers/cpufreq/pxa3xx-cpufreq.c +++ b/drivers/cpufreq/pxa3xx-cpufreq.c @@ -8,6 +8,7 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/cpufreq.h> +#include <linux/soc/pxa/cpu.h> #include <linux/slab.h> #include <linux/io.h>

diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c index 3332b77eef2a..f04ba12dbfa8 100644 --- a/drivers/input/mouse/pxa930_trkball.c +++ b/drivers/input/mouse/pxa930_trkball.c @@ -15,7 +15,6 @@ #include <linux/io.h> #include <linux/slab.h>

-#include <mach/hardware.h> #include <linux/platform_data/mouse-pxa930_trkball.h>

/* Trackball Controller Register Definitions */ diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c index 0f4ac7f844ce..f57bdf083188 100644 --- a/drivers/input/touchscreen/zylonite-wm97xx.c +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -21,9 +21,9 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/soc/pxa/cpu.h> #include <linux/wm97xx.h>

-#include <mach/hardware.h> #include <mach/mfp.h> #include <mach/regs-ac97.h>

diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c index 42dc46e3f00f..9aa3fccd71fb 100644 --- a/drivers/leds/leds-locomo.c +++ b/drivers/leds/leds-locomo.c @@ -11,7 +11,6 @@ #include <linux/device.h> #include <linux/leds.h>

-#include <mach/hardware.h> #include <asm/hardware/locomo.h>

static void locomoled_brightness_set(struct led_classdev *led_cdev, diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 316393c694d7..0db9490dc659 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -31,10 +31,10 @@ #include <linux/gfp.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/soc/pxa/cpu.h>

#include <linux/sizes.h>

-#include <mach/hardware.h> #include <linux/platform_data/mmc-pxamci.h>

#include "pxamci.h" diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 7d96758a8f04..1749dbbacc13 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -16,8 +16,6 @@ #include <linux/mtd/partitions.h>

#include <asm/io.h> -#include <mach/hardware.h> - #include <asm/mach/flash.h>

#define CACHELINESIZE 32 diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index d6d2f75f8f47..7cd1375d6087 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -23,8 +23,8 @@ #include <linux/kernel.h> #include <linux/spinlock.h> #include <linux/platform_device.h> +#include <linux/soc/pxa/cpu.h>

-#include <mach/hardware.h> #include <mach/smemc.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index 5fdd25a9e28e..66fe1d1af12a 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -15,7 +15,6 @@ #include <linux/platform_device.h>

#include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/hardware/scoop.h>

diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index 29fdd174bc23..bce664bbdc98 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -17,7 +17,6 @@

#include <pcmcia/ss.h>

-#include <mach/hardware.h> #include <asm/hardware/sa1111.h> #include <asm/mach-types.h> #include <asm/irq.h> diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c index 7feb8d61c639..f1b5160cb8fa 100644 --- a/drivers/pcmcia/sa1111_lubbock.c +++ b/drivers/pcmcia/sa1111_lubbock.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/delay.h>

-#include <mach/hardware.h> #include <asm/hardware/sa1111.h> #include <asm/mach-types.h>

diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 3a8c84bb174d..9276a628473d 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -47,8 +47,6 @@ #include <linux/spinlock.h> #include <linux/timer.h>

-#include <mach/hardware.h> - #include "soc_common.h"

static irqreturn_t soc_common_pcmcia_interrupt(int irq, void *dev); diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index cf8119b6d320..eeacf480cf36 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -16,8 +16,6 @@ #include <linux/of.h> #include <linux/of_device.h>

-#include <mach/hardware.h> - #include "rtc-sa1100.h"

#define RTC_DEF_DIVIDER (32768 - 1) diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 54aa5c77e549..ab4f610a0140 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -36,8 +36,7 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/usb/otg.h> - -#include <mach/hardware.h> +#include <linux/soc/pxa/cpu.h>

#include "ohci.h"

diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c index f1551e00eb12..e3d1a184d2be 100644 --- a/drivers/video/fbdev/pxafb.c +++ b/drivers/video/fbdev/pxafb.c @@ -57,10 +57,10 @@ #include <linux/console.h> #include <linux/of_graph.h> #include <linux/regulator/consumer.h> +#include <linux/soc/pxa/cpu.h> #include <video/of_display_timing.h> #include <video/videomode.h>

-#include <mach/hardware.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/div64.h> diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 27846c6bdfb0..d33f0375112f 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -35,7 +35,6 @@ #endif

#include <mach/reset.h> -#include <mach/hardware.h>

static unsigned long oscr_freq; static unsigned long sa1100wdt_users; diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/include/linux/soc/pxa/cpu.h similarity index 75% rename from arch/arm/mach-pxa/include/mach/hardware.h rename to include/linux/soc/pxa/cpu.h index ee7eab16135f..5782450ee45c 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/include/linux/soc/pxa/cpu.h @@ -1,61 +1,16 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/mach-pxa/include/mach/hardware.h - * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. */

-#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <mach/addr-map.h> - -/* - * Workarounds for at least 2 errata so far require this. - * The mapping is set in mach-pxa/generic.c. - */ -#define UNCACHED_PHYS_0 0xfe000000 -#define UNCACHED_PHYS_0_SIZE 0x00100000 - -/* - * Intel PXA2xx internal register mapping: - * - * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff - * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff - * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff - * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff - * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff - * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff - * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff - * - * Note that not all PXA2xx chips implement all those addresses, and the - * kernel only maps the minimum needed range of this mapping. - */ -#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) -#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) - -/* With indexed regs we don't want to feed the index through io_p2v() - especially if it is a variable, otherwise horrible code will result. */ -# define __REG2(x,y) \ - (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#else - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#endif - -#ifndef __ASSEMBLY__ +#ifndef __SOC_PXA_CPU_H +#define __SOC_PXA_CPU_H

+#ifdef CONFIG_ARM #include <asm/cputype.h> +#endif

/* * CPU Stepping CPU_ID JTAG_ID @@ -294,12 +249,4 @@ __cpu_is_pxa93x(read_cpuid_id()); \ })

- -/* - * return current memory and LCD clock frequency in units of 10kHz - */ -extern unsigned int get_memclk_frequency_10khz(void); - #endif - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 58274b4a1f09..84d5f85073b9 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/of_gpio.h> +#include <linux/soc/pxa/cpu.h>

#include <sound/pxa2xx-lib.h>

diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 58f8541ba55c..8f78c5a359c5 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -21,7 +21,7 @@ #include <sound/pxa2xx-lib.h> #include <sound/dmaengine_pcm.h>

-#include <mach/hardware.h> +#include <mach/pxa-regs.h> #include <mach/regs-ac97.h> #include <mach/audio.h>

diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 5bfc1a966532..114a33c4a064 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -21,7 +21,7 @@ #include <sound/pxa2xx-lib.h> #include <sound/dmaengine_pcm.h>

-#include <mach/hardware.h> +#include <mach/pxa-regs.h> #include <mach/audio.h>

#include "pxa2xx-i2s.h" diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c index edf2b9eec5b8..7e8f33d7b83f 100644 --- a/sound/soc/pxa/z2.c +++ b/sound/soc/pxa/z2.c @@ -21,7 +21,6 @@ #include <sound/jack.h>

#include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/audio.h> #include <mach/z2.h>

From: Arnd Bergmann arnd@arndb.de

This is a basically a platform_data file, so move it out of the mach/* header directory.

Cc: Marek Vasut marek.vasut@gmail.com Cc: Tomas Cech sleep_walker@suse.com Cc: Sergey Lapin slapin@ossfans.org Acked-by: Mark Brown broonie@kernel.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/balloon3.c | 2 +- arch/arm/mach-pxa/cm-x300.c | 2 +- arch/arm/mach-pxa/colibri-pxa270.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 2 +- arch/arm/mach-pxa/colibri-pxa320.c | 2 +- arch/arm/mach-pxa/csb726.c | 2 +- arch/arm/mach-pxa/devices.c | 2 +- arch/arm/mach-pxa/eseries.c | 2 +- arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-pxa/lubbock.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/mioa701.c | 2 +- arch/arm/mach-pxa/palm27x.c | 2 +- arch/arm/mach-pxa/palmld.c | 2 +- arch/arm/mach-pxa/palmt5.c | 2 +- arch/arm/mach-pxa/palmtc.c | 2 +- arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/palmtreo.c | 2 +- arch/arm/mach-pxa/palmtx.c | 2 +- arch/arm/mach-pxa/palmz72.c | 2 +- arch/arm/mach-pxa/pcm990-baseboard.c | 2 +- arch/arm/mach-pxa/tosa.c | 2 +- arch/arm/mach-pxa/trizeps4.c | 2 +- arch/arm/mach-pxa/viper.c | 2 +- arch/arm/mach-pxa/vpac270.c | 2 +- arch/arm/mach-pxa/zeus.c | 2 +- arch/arm/mach-pxa/zylonite.c | 2 +- .../mach/audio.h => include/linux/platform_data/asoc-pxa.h | 4 ++-- sound/arm/pxa2xx-ac97-lib.c | 2 +- sound/arm/pxa2xx-ac97.c | 2 +- sound/soc/pxa/corgi.c | 2 +- sound/soc/pxa/e740_wm9705.c | 2 +- sound/soc/pxa/e750_wm9705.c | 2 +- sound/soc/pxa/e800_wm9712.c | 2 +- sound/soc/pxa/em-x270.c | 2 +- sound/soc/pxa/mioa701_wm9713.c | 2 +- sound/soc/pxa/palm27x.c | 2 +- sound/soc/pxa/poodle.c | 2 +- sound/soc/pxa/pxa2xx-ac97.c | 2 +- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/pxa/tosa.c | 2 +- sound/soc/pxa/z2.c | 2 +- 42 files changed, 43 insertions(+), 43 deletions(-) rename arch/arm/mach-pxa/include/mach/audio.h => include/linux/platform_data/asoc-pxa.h (93%)

diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 26140249c784..82f9299f67d3 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -41,7 +41,7 @@

#include "pxa27x.h" #include <mach/balloon3.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 85e2537fdc15..09a5264a27c8 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -53,7 +53,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/usb-pxa3xx-ulpi.h>

#include <asm/mach/map.h> diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 2f2cd2ae4187..5dc669752836 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -23,7 +23,7 @@ #include <asm/mach-types.h> #include <linux/sizes.h>

-#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "colibri.h" #include "pxa27x.h"

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 4ceeea142bfd..11ca6c4795e7 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -24,7 +24,7 @@ #include "colibri.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 35dd3adb7712..1a59056e181e 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -24,7 +24,7 @@ #include "colibri.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "pxa27x-udc.h" #include "udc.h"

diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index d48493445ae5..88f2f1d96c7b 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -22,7 +22,7 @@ #include "pxa27x.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/smemc.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 7ca97ddef6fe..454523237c97 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -20,7 +20,7 @@ #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/media/camera-pxa.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmp_dma.h> #include <linux/platform_data/mtd-nand-pxa3xx.h>

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index f37c44b6139d..a8b6483ff665 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -34,7 +34,7 @@ #include "pxa25x.h" #include <mach/eseries-gpio.h> #include "eseries-irq.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include "udc.h" #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index eac32bd9e385..7f10b86f85fd 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -39,7 +39,7 @@ #include "pxa27x.h" #include "lpd270.h" #include <mach/addr-map.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 72816e7c206f..46aef93c0615 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -45,7 +45,7 @@ #include <asm/hardware/sa1111.h>

#include "pxa25x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/lubbock.h> #include "udc.h" #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index cf74adfe65df..c8200fc2159d 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -45,7 +45,7 @@

#include "pxa27x.h" #include "mainstone.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index a79f296e81e0..907cd7b5f58c 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -41,7 +41,7 @@ #include "udc.h" #include "pxa27x-udc.h" #include <linux/platform_data/media/camera-pxa.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/smemc.h>

#include "mioa701.h" diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 6230381a7ca0..1a8d25eecac3 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -25,7 +25,7 @@ #include <asm/mach/map.h>

#include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 5f73716a77f0..d85146957004 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -29,7 +29,7 @@ #include <asm/mach/map.h>

#include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/palmld.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 7c7cbb4e677e..460a8b1043a5 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -29,7 +29,7 @@ #include <asm/mach/map.h>

#include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmt5.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 455cb8ccaf26..c59fc76c0c3d 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -29,7 +29,7 @@ #include <asm/mach/map.h>

#include "pxa25x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/palmtc.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index a2b10db4aacc..fedac670a8af 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -29,7 +29,7 @@ #include <asm/mach/map.h>

#include "pxa25x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmte2.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 2bf0f7f3ea24..d6d5b90d9578 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -29,7 +29,7 @@

#include "pxa27x.h" #include "pxa27x-udc.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmtreo.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 07332c92c9f7..097b88638863 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -32,7 +32,7 @@ #include <asm/mach/map.h>

#include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/palmtx.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index b4a5fe02a0af..66e8fe6f1661 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h>

#include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmz72.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 8dfcc366d0fe..33a9d2eeca1c 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -26,7 +26,7 @@

#include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pcm990_baseboard.h" diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 431709725d02..5af980d77d39 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -45,7 +45,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" #include "tosa_bt.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/smemc.h>

#include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index f76f8be09554..1337008cc760 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -41,7 +41,7 @@

#include "pxa27x.h" #include <mach/trizeps4.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 4b81c0117971..ac94b10bf8c1 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -46,7 +46,7 @@ #include <linux/syscore_ops.h>

#include "pxa25x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include "regs-uart.h" #include <linux/platform_data/pcmcia-pxa2xx_viper.h> diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 14505e83479e..7067d1464689 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -29,7 +29,7 @@ #include <asm/mach/arch.h>

#include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/vpac270.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 5d02f10b5b5a..67396e85bb66 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -46,7 +46,7 @@ #include "udc.h" #include <linux/platform_data/video-pxafb.h> #include "pm.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/pcmcia-pxa2xx_viper.h> #include "zeus.h" #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 9bcb81688201..c48dd6d03df9 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -25,7 +25,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include "pxa3xx.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include "zylonite.h" #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/include/linux/platform_data/asoc-pxa.h similarity index 93% rename from arch/arm/mach-pxa/include/mach/audio.h rename to include/linux/platform_data/asoc-pxa.h index 7beebf7297b5..327454cd8246 100644 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ b/include/linux/platform_data/asoc-pxa.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_AUDIO_H__ -#define __ASM_ARCH_AUDIO_H__ +#ifndef __SOC_PXA_AUDIO_H__ +#define __SOC_PXA_AUDIO_H__

#include <sound/core.h> #include <sound/pcm.h> diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 84d5f85073b9..9b5c1f0f8998 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -23,7 +23,7 @@

#include <mach/irqs.h> #include <mach/regs-ac97.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

static DEFINE_MUTEX(car_mutex); static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index c17a19fe59ed..57c3e12e6629 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -22,7 +22,7 @@ #include <sound/dmaengine_pcm.h>

#include <mach/regs-ac97.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

static void pxa2xx_ac97_legacy_reset(struct snd_ac97 *ac97) { diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 8ee2dea25a8d..8b83709431cb 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -22,7 +22,7 @@

#include <asm/mach-types.h> #include <mach/corgi.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

#include "../codecs/wm8731.h" #include "pxa2xx-i2s.h" diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c index eafa1482afbe..f922be7e0016 100644 --- a/sound/soc/pxa/e740_wm9705.c +++ b/sound/soc/pxa/e740_wm9705.c @@ -13,7 +13,7 @@ #include <sound/pcm.h> #include <sound/soc.h>

-#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/eseries-gpio.h>

#include <asm/mach-types.h> diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c index d75510d7b16b..308828cd736b 100644 --- a/sound/soc/pxa/e750_wm9705.c +++ b/sound/soc/pxa/e750_wm9705.c @@ -13,7 +13,7 @@ #include <sound/pcm.h> #include <sound/soc.h>

-#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/eseries-gpio.h>

#include <asm/mach-types.h> diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c index 56d543da938a..d74fcceef687 100644 --- a/sound/soc/pxa/e800_wm9712.c +++ b/sound/soc/pxa/e800_wm9712.c @@ -14,7 +14,7 @@ #include <sound/soc.h>

#include <asm/mach-types.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/eseries-gpio.h>

static int e800_spk_amp_event(struct snd_soc_dapm_widget *w, diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c index 9076ea7e9339..b59ec22e1e7e 100644 --- a/sound/soc/pxa/em-x270.c +++ b/sound/soc/pxa/em-x270.c @@ -23,7 +23,7 @@ #include <sound/soc.h>

#include <asm/mach-types.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

SND_SOC_DAILINK_DEFS(ac97, DAILINK_COMP_ARRAY(COMP_CPU("pxa2xx-ac97")), diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c index 763db7bbd9bb..0fa37637eca9 100644 --- a/sound/soc/pxa/mioa701_wm9713.c +++ b/sound/soc/pxa/mioa701_wm9713.c @@ -33,7 +33,7 @@ #include <linux/platform_device.h>

#include <asm/mach-types.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

#include <sound/core.h> #include <sound/pcm.h> diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index b92ea1a0453f..275c86379e88 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -20,7 +20,7 @@ #include <sound/jack.h>

#include <asm/mach-types.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/asoc-palm27x.h>

static struct snd_soc_jack hs_jack; diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 323ba3e23039..176a0441235a 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -22,7 +22,7 @@ #include <asm/mach-types.h> #include <asm/hardware/locomo.h> #include <mach/poodle.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

#include "../codecs/wm8731.h" #include "pxa2xx-i2s.h" diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 8f78c5a359c5..9443c1390d2f 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -23,7 +23,7 @@

#include <mach/pxa-regs.h> #include <mach/regs-ac97.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

static void pxa2xx_ac97_warm_reset(struct ac97_controller *adrv) { diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 114a33c4a064..5164c60ba89f 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -22,7 +22,7 @@ #include <sound/dmaengine_pcm.h>

#include <mach/pxa-regs.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

#include "pxa2xx-i2s.h"

diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index 3b40b5fa5de7..06226f9b863e 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -24,7 +24,7 @@

#include <asm/mach-types.h> #include <mach/tosa.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h>

#define TOSA_HP 0 #define TOSA_MIC_INT 1 diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c index 7e8f33d7b83f..dc6c48e4738b 100644 --- a/sound/soc/pxa/z2.c +++ b/sound/soc/pxa/z2.c @@ -21,7 +21,7 @@ #include <sound/jack.h>

#include <asm/mach-types.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <mach/z2.h>

#include "../codecs/wm8750.h"

From: Arnd Bergmann arnd@arndb.de

Rather than relying on machine specific headers to pass down the reboot status and the register locations, use resources and platform_data.

Aside from this, keep the changes to a minimum.

Cc: Wim Van Sebroeck wim@linux-watchdog.org Cc: Guenter Roeck linux@roeck-us.net Cc: linux-watchdog@vger.kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/devices.c | 11 +++ arch/arm/mach-pxa/include/mach/regs-ost.h | 2 + arch/arm/mach-pxa/include/mach/reset.h | 2 +- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 2 +- arch/arm/mach-pxa/reset.c | 3 - arch/arm/mach-sa1100/generic.c | 6 +- arch/arm/mach-sa1100/include/mach/reset.h | 1 - drivers/watchdog/sa1100_wdt.c | 87 ++++++++++++++++------- 10 files changed, 83 insertions(+), 35 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 454523237c97..12f78636045f 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -24,6 +24,8 @@ #include <linux/platform_data/mmp_dma.h> #include <linux/platform_data/mtd-nand-pxa3xx.h>

+#include <mach/regs-ost.h> +#include <mach/reset.h> #include "devices.h" #include "generic.h"

@@ -1118,3 +1120,12 @@ void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata) { pxa_register_device(&pxa2xx_pxa_dma, dma_pdata); } + +void __init pxa_register_wdt(unsigned int reset_status) +{ + struct resource res = DEFINE_RES_MEM(OST_PHYS, OST_LEN); + + reset_status &= RESET_STATUS_WATCHDOG; + platform_device_register_resndata(NULL, "sa1100_wdt", -1, &res, 1, + &reset_status, sizeof(reset_status)); +} diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h index 109d0ed264df..c8001cfc8d6b 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ost.h +++ b/arch/arm/mach-pxa/include/mach/regs-ost.h @@ -7,6 +7,8 @@ /* * OS Timer & Match Registers */ +#define OST_PHYS 0x40A00000 +#define OST_LEN 0x00000020

#define OSMR0 io_p2v(0x40A00000) /* */ #define OSMR1 io_p2v(0x40A00004) /* */ diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h index e1c4d100fd45..963dd190bc13 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/include/mach/reset.h @@ -8,8 +8,8 @@ #define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ #define RESET_STATUS_ALL (0xf)

-extern unsigned int reset_status; extern void clear_reset_status(unsigned int mask); +extern void pxa_register_wdt(unsigned int reset_status);

/** * init_gpio_reset() - register GPIO as reset generator diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 305047ebd2f1..dfc90b41fba3 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -240,7 +240,7 @@ static int __init pxa25x_init(void)

if (cpu_is_pxa25x()) {

- reset_status = RCSR; + pxa_register_wdt(RCSR);

pxa25x_init_pm();

diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index a81ac88ecbfd..38fdd22c4dc5 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -337,7 +337,7 @@ static int __init pxa27x_init(void)

if (cpu_is_pxa27x()) {

- reset_status = RCSR; + pxa_register_wdt(RCSR);

pxa27x_init_pm();

diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index fc84aed99481..7c569fa2a6da 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -463,7 +463,7 @@ static int __init pxa3xx_init(void)

if (cpu_is_pxa3xx()) {

- reset_status = ARSR; + pxa_register_wdt(ARSR);

/* * clear RDH bit every time after reset diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index af78405aa4e9..fcb791c5ae3e 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -11,9 +11,6 @@ #include <mach/reset.h> #include <mach/smemc.h>

-unsigned int reset_status; -EXPORT_SYMBOL(reset_status); - static void do_hw_reset(void);

static int reset_gpio = -1; diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 4dfb7554649d..6c21f214cd60 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -39,9 +39,6 @@ #include "generic.h" #include <clocksource/pxa.h>

-unsigned int reset_status; -EXPORT_SYMBOL(reset_status); - #define NR_FREQS 16

/* @@ -319,10 +316,13 @@ static struct platform_device *sa11x0_devices[] __initdata = {

static int __init sa1100_init(void) { + struct resource wdt_res = DEFINE_RES_MEM(0x90000000, 0x20); pm_power_off = sa1100_power_off;

regulator_has_full_constraints();

+ platform_device_register_simple("sa1100_wdt", -1, &wdt_res, 1); + return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices)); }

diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h index 27695650a567..a6723d45ae2a 100644 --- a/arch/arm/mach-sa1100/include/mach/reset.h +++ b/arch/arm/mach-sa1100/include/mach/reset.h @@ -10,7 +10,6 @@ #define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ #define RESET_STATUS_ALL (0xf)

-extern unsigned int reset_status; static inline void clear_reset_status(unsigned int mask) { RCSR = mask; diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index d33f0375112f..2d0a06a158a8 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -22,6 +22,7 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/fs.h> +#include <linux/platform_device.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/init.h> @@ -30,16 +31,42 @@ #include <linux/uaccess.h> #include <linux/timex.h>

-#ifdef CONFIG_ARCH_PXA -#include <mach/regs-ost.h> -#endif +#define REG_OSMR0 0x0000 /* OS timer Match Reg. 0 */ +#define REG_OSMR1 0x0004 /* OS timer Match Reg. 1 */ +#define REG_OSMR2 0x0008 /* OS timer Match Reg. 2 */ +#define REG_OSMR3 0x000c /* OS timer Match Reg. 3 */ +#define REG_OSCR 0x0010 /* OS timer Counter Reg. */ +#define REG_OSSR 0x0014 /* OS timer Status Reg. */ +#define REG_OWER 0x0018 /* OS timer Watch-dog Enable Reg. */ +#define REG_OIER 0x001C /* OS timer Interrupt Enable Reg. */

-#include <mach/reset.h> +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OWER_WME (1 << 0) /* Watchdog Match Enable */ + +#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ +#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ +#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */

static unsigned long oscr_freq; static unsigned long sa1100wdt_users; static unsigned int pre_margin; static int boot_status; +static void __iomem *reg_base; + +static inline void sa1100_wr(u32 val, u32 offset) +{ + writel_relaxed(val, reg_base + offset); +} + +static inline u32 sa1100_rd(u32 offset) +{ + return readl_relaxed(reg_base + offset); +}

/* * Allow only one person to hold it open @@ -50,10 +77,10 @@ static int sa1100dog_open(struct inode *inode, struct file *file) return -EBUSY;

/* Activate SA1100 Watchdog timer */ - writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); - writel_relaxed(OSSR_M3, OSSR); - writel_relaxed(OWER_WME, OWER); - writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER); + sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3); + sa1100_wr(OSSR_M3, REG_OSSR); + sa1100_wr(OWER_WME, REG_OWER); + sa1100_wr(sa1100_rd(REG_OIER) | OIER_E3, REG_OIER); return stream_open(inode, file); }

@@ -61,7 +88,7 @@ static int sa1100dog_open(struct inode *inode, struct file *file) * The watchdog cannot be disabled. * * Previous comments suggested that turning off the interrupt by - * clearing OIER[E3] would prevent the watchdog timing out but this + * clearing REG_OIER[E3] would prevent the watchdog timing out but this * does not appear to be true (at least on the PXA255). */ static int sa1100dog_release(struct inode *inode, struct file *file) @@ -76,7 +103,7 @@ static ssize_t sa1100dog_write(struct file *file, const char __user *data, { if (len) /* Refresh OSMR3 timer. */ - writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3); return len; }

@@ -110,7 +137,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, break;

case WDIOC_KEEPALIVE: - writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3); ret = 0; break;

@@ -125,7 +152,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, }

pre_margin = oscr_freq * time; - writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3); + sa1100_wr(sa1100_rd(REG_OSCR) + pre_margin, REG_OSMR3); fallthrough;

case WDIOC_GETTIMEOUT: @@ -151,12 +178,22 @@ static struct miscdevice sa1100dog_miscdev = { .fops = &sa1100dog_fops, };

-static int margin __initdata = 60; /* (secs) Default is 1 minute */ +static int margin = 60; /* (secs) Default is 1 minute */ static struct clk *clk;

-static int __init sa1100dog_init(void) +static int sa1100dog_probe(struct platform_device *pdev) { int ret; + int *platform_data; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + reg_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + ret = PTR_ERR_OR_ZERO(reg_base); + if (ret) + return ret;

clk = clk_get(NULL, "OSTIMER0"); if (IS_ERR(clk)) { @@ -174,13 +211,9 @@ static int __init sa1100dog_init(void)

oscr_freq = clk_get_rate(clk);

- /* - * Read the reset status, and save it for later. If - * we suspend, RCSR will be cleared, and the watchdog - * reset reason will be lost. - */ - boot_status = (reset_status & RESET_STATUS_WATCHDOG) ? - WDIOF_CARDRESET : 0; + platform_data = pdev->dev.platform_data; + if (platform_data && *platform_data) + boot_status = WDIOF_CARDRESET; pre_margin = oscr_freq * margin;

ret = misc_register(&sa1100dog_miscdev); @@ -196,15 +229,21 @@ static int __init sa1100dog_init(void) return ret; }

-static void __exit sa1100dog_exit(void) +static int sa1100dog_remove(struct platform_device *pdev) { misc_deregister(&sa1100dog_miscdev); clk_disable_unprepare(clk); clk_put(clk); + + return 0; }

-module_init(sa1100dog_init); -module_exit(sa1100dog_exit); +struct platform_driver sa1100dog_driver = { + .driver.name = "sa1100_wdt", + .probe = sa1100dog_probe, + .remove = sa1100dog_remove, +}; +module_platform_driver(sa1100dog_driver);

MODULE_AUTHOR("Oleg Drokin green@crimea.edu"); MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");

From: Arnd Bergmann arnd@arndb.de

The pxa2xx-ac97-lib code is the last driver to use mach/irqs.h for PXA. Almost everything already passes the interrupt as a resource, so use it from there.

The one exception is the mxm8x10 machine, which apparently has a resource-less device. Replacing it with the correct one enables the driver here as well.

Cc: alsa-devel@alsa-project.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/mxm8x10.c | 8 ++------ sound/arm/pxa2xx-ac97-lib.c | 10 +++++++--- 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index fde386f6cffe..35546b59c88e 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -26,6 +26,7 @@ #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/platform_data/asoc-pxa.h> #include "pxa320.h"

#include "mxm8x10.h" @@ -356,14 +357,9 @@ void __init mxm_8x10_usb_host_init(void) pxa_set_ohci_info(&mxm_8x10_ohci_platform_data); }

-/* AC97 Sound Support */ -static struct platform_device mxm_8x10_ac97_device = { - .name = "pxa2xx-ac97" -}; - void __init mxm_8x10_ac97_init(void) { - platform_device_register(&mxm_8x10_ac97_device); + pxa_set_ac97_info(NULL); }

/* NAND flash Support */ diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 9b5c1f0f8998..8c79d224f03b 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -21,7 +21,6 @@

#include <sound/pxa2xx-lib.h>

-#include <mach/irqs.h> #include <mach/regs-ac97.h> #include <linux/platform_data/asoc-pxa.h>

@@ -319,6 +318,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume); int pxa2xx_ac97_hw_probe(struct platform_device *dev) { int ret; + int irq; pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;

if (pdata) { @@ -387,7 +387,11 @@ int pxa2xx_ac97_hw_probe(struct platform_device *dev) if (ret) goto err_clk2;

- ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL); + irq = platform_get_irq(dev, 0); + if (!irq) + goto err_irq; + + ret = request_irq(irq, pxa2xx_ac97_irq, 0, "AC97", NULL); if (ret < 0) goto err_irq;

@@ -413,7 +417,7 @@ void pxa2xx_ac97_hw_remove(struct platform_device *dev) if (cpu_is_pxa27x()) gpio_free(reset_gpio); GCR |= GCR_ACLINK_OFF; - free_irq(IRQ_AC97, NULL); + free_irq(platform_get_irq(dev, 0), NULL); if (ac97conf_clk) { clk_put(ac97conf_clk); ac97conf_clk = NULL;

From: Arnd Bergmann arnd@arndb.de

Drivers should not rely on the contents of this file, so move it into the platform directory directly.

Cc: Philipp Zabel philipp.zabel@gmail.com Cc: Paul Parsons lost.distance@yahoo.com

Signed-off-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/lkml/87mudkmx8g.fsf@belgarion.home/ --- arch/arm/mach-pxa/{include/mach => }/addr-map.h | 0 arch/arm/mach-pxa/generic.c | 2 +- arch/arm/mach-pxa/hx4700.c | 2 +- arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-pxa/magician.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa25x.h | 2 +- arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa27x.h | 2 +- arch/arm/mach-pxa/pxa3xx.c | 2 +- arch/arm/mach-pxa/pxa3xx.h | 2 +- arch/arm/mach-pxa/trizeps4.h | 2 +- arch/arm/mach-pxa/xcep.c | 2 +- 14 files changed, 13 insertions(+), 13 deletions(-) rename arch/arm/mach-pxa/{include/mach => }/addr-map.h (100%)

diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/addr-map.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/addr-map.h rename to arch/arm/mach-pxa/addr-map.h diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 3c3cd90bb9b4..f9083c4f0aea 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -22,7 +22,7 @@ #include <asm/mach/map.h> #include <asm/mach-types.h>

-#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/irqs.h> #include <mach/reset.h> #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 191a6c24fe19..140a44cb2989 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -40,7 +40,7 @@ #include <asm/mach/arch.h>

#include "pxa27x.h" -#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/hx4700.h> #include <linux/platform_data/irda-pxaficp.h>

diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 7f10b86f85fd..e03436710752 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -38,7 +38,7 @@

#include "pxa27x.h" #include "lpd270.h" -#include <mach/addr-map.h> +#include "addr-map.h" #include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 345a44d15a2c..20ca3e28c7fb 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -34,7 +34,7 @@ #include <asm/system_info.h>

#include "pxa27x.h" -#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/magician.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index c8200fc2159d..f0072e63b456 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -51,7 +51,7 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/smemc.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index dfc90b41fba3..8d21c7eef1d2 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -34,7 +34,7 @@ #include "pxa25x.h" #include <mach/reset.h> #include "pm.h" -#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/smemc.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h index 403bc16c2ed2..4699ebf7b486 100644 --- a/arch/arm/mach-pxa/pxa25x.h +++ b/arch/arm/mach-pxa/pxa25x.h @@ -2,7 +2,7 @@ #ifndef __MACH_PXA25x_H #define __MACH_PXA25x_H

-#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/pxa2xx-regs.h> #include "mfp-pxa25x.h" #include <mach/irqs.h> diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 38fdd22c4dc5..c36a9784fab8 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -33,7 +33,7 @@ #include <mach/reset.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" -#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/smemc.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h index 6c99090647d2..bf2755561fe5 100644 --- a/arch/arm/mach-pxa/pxa27x.h +++ b/arch/arm/mach-pxa/pxa27x.h @@ -3,7 +3,7 @@ #define __MACH_PXA27x_H

#include <linux/suspend.h> -#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/pxa2xx-regs.h> #include "mfp-pxa27x.h" #include <mach/irqs.h> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 7c569fa2a6da..7881888107c7 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -32,7 +32,7 @@ #include <mach/reset.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" -#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/smemc.h> #include <mach/irqs.h>

diff --git a/arch/arm/mach-pxa/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h index 22ace053ea25..6b424d328680 100644 --- a/arch/arm/mach-pxa/pxa3xx.h +++ b/arch/arm/mach-pxa/pxa3xx.h @@ -2,7 +2,7 @@ #ifndef __MACH_PXA3XX_H #define __MACH_PXA3XX_H

-#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/pxa3xx-regs.h> #include <mach/irqs.h>

diff --git a/arch/arm/mach-pxa/trizeps4.h b/arch/arm/mach-pxa/trizeps4.h index 7597b9de11e2..e0f37c0ff06f 100644 --- a/arch/arm/mach-pxa/trizeps4.h +++ b/arch/arm/mach-pxa/trizeps4.h @@ -11,7 +11,7 @@ #ifndef _TRIPEPS4_H_ #define _TRIPEPS4_H_

-#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */

/* physical memory regions */ diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index e6ab428287ae..7389e0199144 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -25,7 +25,7 @@ #include <asm/mach/map.h>

#include "pxa25x.h" -#include <mach/addr-map.h> +#include "addr-map.h" #include <mach/smemc.h>

#include "generic.h"

From: Arnd Bergmann arnd@arndb.de

The audio driver should not use a hardwired gpio number from the header. Change it to use a lookup table.

Acked-by: Mark Brown broonie@kernel.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/tosa.c | 12 ++++++++++++ sound/soc/pxa/tosa.c | 16 +++++++--------- 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9476ed0f55e9..5a16a025192c 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -887,6 +887,17 @@ static struct platform_device wm9712_device = { .id = -1, };

+static struct gpiod_lookup_table tosa_audio_gpio_table = { + .dev_id = "tosa-audio", + .table = { + GPIO_LOOKUP("tc6393xb", + TOSA_GPIO_L_MUTE - TOSA_TC6393XB_GPIO_BASE, + "l-mute", GPIO_ACTIVE_HIGH), + { }, + }, +}; + + static struct platform_device tosa_audio_device = { .name = "tosa-audio", .id = -1, @@ -944,6 +955,7 @@ static void __init tosa_init(void) PMCR = 0x01;

gpiod_add_lookup_table(&tosa_mci_gpio_table); + gpiod_add_lookup_table(&tosa_audio_gpio_table); pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index 06226f9b863e..157e6bcacffd 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -16,14 +16,13 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/device.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h>

#include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h>

#include <asm/mach-types.h> -#include <mach/tosa.h> #include <linux/platform_data/asoc-pxa.h>

#define TOSA_HP 0 @@ -35,6 +34,7 @@

static int tosa_jack_func; static int tosa_spk_func; +static struct gpio_desc *l_mute_gpio;

static void tosa_ext_control(struct snd_soc_dapm_context *dapm) { @@ -128,7 +128,7 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol, static int tosa_hp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(TOSA_GPIO_L_MUTE, SND_SOC_DAPM_EVENT_ON(event) ? 1 : 0); + gpiod_set_value(l_mute_gpio, SND_SOC_DAPM_EVENT_ON(event) ? 1 : 0); return 0; }

@@ -222,25 +222,23 @@ static int tosa_probe(struct platform_device *pdev) struct snd_soc_card *card = &tosa; int ret;

- ret = gpio_request_one(TOSA_GPIO_L_MUTE, GPIOF_OUT_INIT_LOW, - "Headphone Jack"); + l_mute_gpio = devm_gpiod_get(&pdev->dev, "l-mute", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(l_mute_gpio); if (ret) return ret;

card->dev = &pdev->dev;

ret = devm_snd_soc_register_card(&pdev->dev, card); - if (ret) { + if (ret) dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); - gpio_free(TOSA_GPIO_L_MUTE); - } + return ret; }

static int tosa_remove(struct platform_device *pdev) { - gpio_free(TOSA_GPIO_L_MUTE); return 0; }

From: Arnd Bergmann arnd@arndb.de

The audio driver should not use a hardwired gpio number from the header. Change it to use a lookup table.

Acked-by: Mark Brown broonie@kernel.org Cc: alsa-devel@alsa-project.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/corgi.c | 22 ++++++++++- arch/arm/mach-pxa/{include/mach => }/corgi.h | 2 +- arch/arm/mach-pxa/corgi_pm.c | 2 +- sound/soc/pxa/corgi.c | 41 +++++++++++++------- 4 files changed, 51 insertions(+), 16 deletions(-) rename arch/arm/mach-pxa/{include/mach => }/corgi.h (98%)

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index f897762c8b58..c546356d0f02 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -49,7 +49,7 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" -#include <mach/corgi.h> +#include "corgi.h" #include "sharpsl_pm.h"

#include <asm/mach/sharpsl_param.h> @@ -472,6 +472,25 @@ static struct platform_device corgiled_device = { }, };

+static struct gpiod_lookup_table corgi_audio_gpio_table = { + .dev_id = "corgi-audio", + .table = { + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MUTE_L - CORGI_SCOOP_GPIO_BASE, + "mute-l", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MUTE_R - CORGI_SCOOP_GPIO_BASE, + "mute-r", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_APM_ON - CORGI_SCOOP_GPIO_BASE, + "apm-on", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MIC_BIAS - CORGI_SCOOP_GPIO_BASE, + "mic-bias", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* * Corgi Audio */ @@ -744,6 +763,7 @@ static void __init corgi_init(void)

pxa_set_udc_info(&udc_info); gpiod_add_lookup_table(&corgi_mci_gpio_table); + gpiod_add_lookup_table(&corgi_audio_gpio_table); pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/corgi.h similarity index 98% rename from arch/arm/mach-pxa/include/mach/corgi.h rename to arch/arm/mach-pxa/corgi.h index b565ca7b8cda..fe2fcf6532b9 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/corgi.h @@ -9,7 +9,7 @@ #ifndef __ASM_ARCH_CORGI_H #define __ASM_ARCH_CORGI_H 1

-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */ +#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO */

/* * Corgi (Non Standard) GPIO Definitions diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index ff1ac9bf37cb..c6ddfc737644 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -20,7 +20,7 @@ #include <asm/irq.h> #include <asm/mach-types.h>

-#include <mach/corgi.h> +#include "corgi.h" #include <mach/pxa2xx-regs.h> #include "sharpsl_pm.h"

diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 8b83709431cb..4489d2c8b124 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -21,7 +21,6 @@ #include <sound/soc.h>

#include <asm/mach-types.h> -#include <mach/corgi.h> #include <linux/platform_data/asoc-pxa.h>

#include "../codecs/wm8731.h" @@ -41,6 +40,9 @@ static int corgi_jack_func; static int corgi_spk_func;

+static struct gpio_desc *gpiod_mute_l, *gpiod_mute_r, + *gpiod_apm_on, *gpiod_mic_bias; + static void corgi_ext_control(struct snd_soc_dapm_context *dapm) { snd_soc_dapm_mutex_lock(dapm); @@ -49,8 +51,8 @@ static void corgi_ext_control(struct snd_soc_dapm_context *dapm) switch (corgi_jack_func) { case CORGI_HP: /* set = unmute headphone */ - gpio_set_value(CORGI_GPIO_MUTE_L, 1); - gpio_set_value(CORGI_GPIO_MUTE_R, 1); + gpiod_set_value(gpiod_mute_l, 1); + gpiod_set_value(gpiod_mute_r, 1); snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Jack"); snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack"); snd_soc_dapm_enable_pin_unlocked(dapm, "Headphone Jack"); @@ -58,24 +60,24 @@ static void corgi_ext_control(struct snd_soc_dapm_context *dapm) break; case CORGI_MIC: /* reset = mute headphone */ - gpio_set_value(CORGI_GPIO_MUTE_L, 0); - gpio_set_value(CORGI_GPIO_MUTE_R, 0); + gpiod_set_value(gpiod_mute_l, 0); + gpiod_set_value(gpiod_mute_r, 0); snd_soc_dapm_enable_pin_unlocked(dapm, "Mic Jack"); snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack"); snd_soc_dapm_disable_pin_unlocked(dapm, "Headphone Jack"); snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack"); break; case CORGI_LINE: - gpio_set_value(CORGI_GPIO_MUTE_L, 0); - gpio_set_value(CORGI_GPIO_MUTE_R, 0); + gpiod_set_value(gpiod_mute_l, 0); + gpiod_set_value(gpiod_mute_r, 0); snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Jack"); snd_soc_dapm_enable_pin_unlocked(dapm, "Line Jack"); snd_soc_dapm_disable_pin_unlocked(dapm, "Headphone Jack"); snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack"); break; case CORGI_HEADSET: - gpio_set_value(CORGI_GPIO_MUTE_L, 0); - gpio_set_value(CORGI_GPIO_MUTE_R, 1); + gpiod_set_value(gpiod_mute_l, 0); + gpiod_set_value(gpiod_mute_r, 1); snd_soc_dapm_enable_pin_unlocked(dapm, "Mic Jack"); snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack"); snd_soc_dapm_disable_pin_unlocked(dapm, "Headphone Jack"); @@ -108,8 +110,8 @@ static int corgi_startup(struct snd_pcm_substream *substream) static void corgi_shutdown(struct snd_pcm_substream *substream) { /* set = unmute headphone */ - gpio_set_value(CORGI_GPIO_MUTE_L, 1); - gpio_set_value(CORGI_GPIO_MUTE_R, 1); + gpiod_set_value(gpiod_mute_l, 1); + gpiod_set_value(gpiod_mute_r, 1); }

static int corgi_hw_params(struct snd_pcm_substream *substream, @@ -199,14 +201,14 @@ static int corgi_set_spk(struct snd_kcontrol *kcontrol, static int corgi_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_apm_on, SND_SOC_DAPM_EVENT_ON(event)); return 0; }

static int corgi_mic_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(CORGI_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_mic_bias, SND_SOC_DAPM_EVENT_ON(event)); return 0; }

@@ -293,6 +295,19 @@ static int corgi_probe(struct platform_device *pdev)

card->dev = &pdev->dev;

+ gpiod_mute_l = devm_gpiod_get(&pdev->dev, "mute-l", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_mute_l)) + return PTR_ERR(gpiod_mute_l); + gpiod_mute_r = devm_gpiod_get(&pdev->dev, "mute-r", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_mute_r)) + return PTR_ERR(gpiod_mute_r); + gpiod_apm_on = devm_gpiod_get(&pdev->dev, "apm-on", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_apm_on)) + return PTR_ERR(gpiod_apm_on); + gpiod_mic_bias = devm_gpiod_get(&pdev->dev, "mic-bias", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_mic_bias)) + return PTR_ERR(gpiod_mic_bias); + ret = devm_snd_soc_register_card(&pdev->dev, card); if (ret) dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",

From: Arnd Bergmann arnd@arndb.de

Lubbock is the only machine that has three IRQs for the UDC. These are currently hardcoded in the driver based on a machine header file.

Change this to use platform device resources as we use for the generic IRQ anyway.

Cc: Felipe Balbi balbi@kernel.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: linux-usb@vger.kernel.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/lubbock.c | 12 +++++- .../arm/mach-pxa/{include/mach => }/lubbock.h | 2 - drivers/usb/gadget/udc/pxa25x_udc.c | 37 ++++++++++--------- drivers/usb/gadget/udc/pxa25x_udc.h | 7 +--- 4 files changed, 32 insertions(+), 26 deletions(-) rename arch/arm/mach-pxa/{include/mach => }/lubbock.h (97%)

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 46aef93c0615..201f89f49642 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -46,7 +46,7 @@

#include "pxa25x.h" #include <linux/platform_data/asoc-pxa.h> -#include <mach/lubbock.h> +#include "lubbock.h" #include "udc.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/video-pxafb.h> @@ -131,6 +131,13 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software };

+static struct resource lubbock_udc_resources[] = { + DEFINE_RES_MEM(0x40600000, 0x10000), + DEFINE_RES_IRQ(IRQ_USB), + DEFINE_RES_IRQ(LUBBOCK_USB_IRQ), + DEFINE_RES_IRQ(LUBBOCK_USB_DISC_IRQ), +}; + /* GPIOs for SA1111 PCMCIA */ static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = { .dev_id = "1800", @@ -496,6 +503,9 @@ static void __init lubbock_init(void) lubbock_init_pcmcia();

clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); + /* lubbock has two extra IRQs */ + pxa25x_device_udc.resource = lubbock_udc_resources; + pxa25x_device_udc.num_resources = ARRAY_SIZE(lubbock_udc_resources); pxa_set_udc_info(&udc_info); pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/lubbock.h similarity index 97% rename from arch/arm/mach-pxa/include/mach/lubbock.h rename to arch/arm/mach-pxa/lubbock.h index a3af4a2f9446..8e3ff7d57121 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/lubbock.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/mach-pxa/include/mach/lubbock.h - * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c index 6c414c99d01c..c593fc383481 100644 --- a/drivers/usb/gadget/udc/pxa25x_udc.c +++ b/drivers/usb/gadget/udc/pxa25x_udc.c @@ -44,10 +44,6 @@ #include <linux/usb/gadget.h> #include <linux/usb/otg.h>

-#ifdef CONFIG_ARCH_LUBBOCK -#include <mach/lubbock.h> -#endif - #define UDCCR 0x0000 /* UDC Control Register */ #define UDC_RES1 0x0004 /* UDC Undocumented - Reserved1 */ #define UDC_RES2 0x0008 /* UDC Undocumented - Reserved2 */ @@ -1578,18 +1574,15 @@ lubbock_vbus_irq(int irq, void *_dev) int vbus;

dev->stats.irqs++; - switch (irq) { - case LUBBOCK_USB_IRQ: + if (irq == dev->usb_irq) { vbus = 1; - disable_irq(LUBBOCK_USB_IRQ); - enable_irq(LUBBOCK_USB_DISC_IRQ); - break; - case LUBBOCK_USB_DISC_IRQ: + disable_irq(dev->usb_irq); + enable_irq(dev->usb_disc_irq); + } else if (irq == dev->usb_disc_irq) { vbus = 0; - disable_irq(LUBBOCK_USB_DISC_IRQ); - enable_irq(LUBBOCK_USB_IRQ); - break; - default: + disable_irq(dev->usb_disc_irq); + enable_irq(dev->usb_irq); + } else { return IRQ_NONE; }

@@ -2422,20 +2415,28 @@ static int pxa25x_udc_probe(struct platform_device *pdev)

#ifdef CONFIG_ARCH_LUBBOCK if (machine_is_lubbock()) { - retval = devm_request_irq(&pdev->dev, LUBBOCK_USB_DISC_IRQ, + dev->usb_irq = platform_get_irq(pdev, 1); + if (dev->usb_irq < 0) + return dev->usb_irq; + + dev->usb_disc_irq = platform_get_irq(pdev, 2); + if (dev->usb_disc_irq < 0) + return dev->usb_disc_irq; + + retval = devm_request_irq(&pdev->dev, dev->usb_disc_irq, lubbock_vbus_irq, 0, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", - driver_name, LUBBOCK_USB_DISC_IRQ, retval); + driver_name, dev->usb_disc_irq, retval); goto err; } - retval = devm_request_irq(&pdev->dev, LUBBOCK_USB_IRQ, + retval = devm_request_irq(&pdev->dev, dev->usb_irq, lubbock_vbus_irq, 0, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", - driver_name, LUBBOCK_USB_IRQ, retval); + driver_name, dev->usb_irq, retval); goto err; } } else diff --git a/drivers/usb/gadget/udc/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h index aa4b68fd9fc0..6ab6047edc83 100644 --- a/drivers/usb/gadget/udc/pxa25x_udc.h +++ b/drivers/usb/gadget/udc/pxa25x_udc.h @@ -117,16 +117,13 @@ struct pxa25x_udc { u64 dma_mask; struct pxa25x_ep ep [PXA_UDC_NUM_ENDPOINTS]; void __iomem *regs; + int usb_irq; + int usb_disc_irq; }; #define to_pxa25x(g) (container_of((g), struct pxa25x_udc, gadget))

/*-------------------------------------------------------------------------*/

-#ifdef CONFIG_ARCH_LUBBOCK -#include <mach/lubbock.h> -/* lubbock can also report usb connect/disconnect irqs */ -#endif - static struct pxa25x_udc *the_controller;

/*-------------------------------------------------------------------------*/

From: Arnd Bergmann arnd@arndb.de

The three eseries machines have very similar drivers for audio, all using the mach/eseries-gpio.h header for finding the gpio numbers.

Change these to use gpio descriptors to avoid the header file dependency.

I convert the _OFF gpio numbers into GPIO_ACTIVE_LOW ones for consistency here.

Acked-by: Mark Brown broonie@kernel.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Reviewed-by: Linus Walleij linus.walleij@linaro.org Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/eseries.c | 32 ++++++++++++++++++++++++++++++++ sound/soc/pxa/e740_wm9705.c | 35 ++++++++++++++++++----------------- sound/soc/pxa/e750_wm9705.c | 31 ++++++++++++++----------------- sound/soc/pxa/e800_wm9712.c | 31 ++++++++++++++----------------- 4 files changed, 78 insertions(+), 51 deletions(-)

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index a8b6483ff665..2643a2a72408 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -24,6 +24,7 @@ #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> #include <linux/memblock.h> +#include <linux/gpio/machine.h>

#include <video/w100fb.h>

@@ -520,6 +521,16 @@ static struct platform_device e740_audio_device = { .id = -1, };

+static struct gpiod_lookup_table e740_audio_gpio_table = { + .dev_id = "e740-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E740_WM9705_nAVDD2, "Audio power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_E740_AMP_ON, "Output amp", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* ----------------------------------------------------------------------- */

static struct platform_device *e740_devices[] __initdata = { @@ -540,6 +551,7 @@ static void __init e740_init(void) "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e740_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e740_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); @@ -716,6 +728,15 @@ static struct platform_device e750_tc6393xb_device = { .resource = eseries_tmio_resources, };

+static struct gpiod_lookup_table e750_audio_gpio_table = { + .dev_id = "e750-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E750_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct platform_device e750_audio_device = { .name = "e750-audio", .id = -1, @@ -740,6 +761,7 @@ static void __init e750_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e750_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e750_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); @@ -935,6 +957,15 @@ static struct platform_device e800_tc6393xb_device = { .resource = eseries_tmio_resources, };

+static struct gpiod_lookup_table e800_audio_gpio_table = { + .dev_id = "e800-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E800_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct platform_device e800_audio_device = { .name = "e800-audio", .id = -1, @@ -959,6 +990,7 @@ static void __init e800_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e800_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e800_devices)); pxa_set_ac97_info(NULL); } diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c index f922be7e0016..4e0e9b778d4c 100644 --- a/sound/soc/pxa/e740_wm9705.c +++ b/sound/soc/pxa/e740_wm9705.c @@ -7,17 +7,19 @@

#include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h>

#include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h>

#include <linux/platform_data/asoc-pxa.h> -#include <mach/eseries-gpio.h>

#include <asm/mach-types.h>

+static struct gpio_desc *gpiod_output_amp, *gpiod_input_amp; +static struct gpio_desc *gpiod_audio_power; + #define E740_AUDIO_OUT 1 #define E740_AUDIO_IN 2

@@ -25,9 +27,9 @@ static int e740_audio_power;

static void e740_sync_audio_power(int status) { - gpio_set_value(GPIO_E740_WM9705_nAVDD2, !status); - gpio_set_value(GPIO_E740_AMP_ON, (status & E740_AUDIO_OUT) ? 1 : 0); - gpio_set_value(GPIO_E740_MIC_ON, (status & E740_AUDIO_IN) ? 1 : 0); + gpiod_set_value(gpiod_audio_power, !status); + gpiod_set_value(gpiod_output_amp, (status & E740_AUDIO_OUT) ? 1 : 0); + gpiod_set_value(gpiod_input_amp, (status & E740_AUDIO_IN) ? 1 : 0); }

static int e740_mic_amp_event(struct snd_soc_dapm_widget *w, @@ -116,36 +118,35 @@ static struct snd_soc_card e740 = { .fully_routed = true, };

-static struct gpio e740_audio_gpios[] = { - { GPIO_E740_MIC_ON, GPIOF_OUT_INIT_LOW, "Mic amp" }, - { GPIO_E740_AMP_ON, GPIOF_OUT_INIT_LOW, "Output amp" }, - { GPIO_E740_WM9705_nAVDD2, GPIOF_OUT_INIT_HIGH, "Audio power" }, -}; - static int e740_probe(struct platform_device *pdev) { struct snd_soc_card *card = &e740; int ret;

- ret = gpio_request_array(e740_audio_gpios, - ARRAY_SIZE(e740_audio_gpios)); + gpiod_input_amp = devm_gpiod_get(&pdev->dev, "Mic amp", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(gpiod_input_amp); + if (ret) + return ret; + gpiod_output_amp = devm_gpiod_get(&pdev->dev, "Output amp", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(gpiod_output_amp); + if (ret) + return ret; + gpiod_audio_power = devm_gpiod_get(&pdev->dev, "Audio power", GPIOD_OUT_HIGH); + ret = PTR_ERR_OR_ZERO(gpiod_audio_power); if (ret) return ret;

card->dev = &pdev->dev;

ret = devm_snd_soc_register_card(&pdev->dev, card); - if (ret) { + if (ret) dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); - gpio_free_array(e740_audio_gpios, ARRAY_SIZE(e740_audio_gpios)); - } return ret; }

static int e740_remove(struct platform_device *pdev) { - gpio_free_array(e740_audio_gpios, ARRAY_SIZE(e740_audio_gpios)); return 0; }

diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c index 308828cd736b..7a1e0d8bfd11 100644 --- a/sound/soc/pxa/e750_wm9705.c +++ b/sound/soc/pxa/e750_wm9705.c @@ -7,24 +7,25 @@

#include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h>

#include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h>

#include <linux/platform_data/asoc-pxa.h> -#include <mach/eseries-gpio.h>

#include <asm/mach-types.h>

+static struct gpio_desc *gpiod_spk_amp, *gpiod_hp_amp; + static int e750_spk_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { if (event & SND_SOC_DAPM_PRE_PMU) - gpio_set_value(GPIO_E750_SPK_AMP_OFF, 0); + gpiod_set_value(gpiod_spk_amp, 1); else if (event & SND_SOC_DAPM_POST_PMD) - gpio_set_value(GPIO_E750_SPK_AMP_OFF, 1); + gpiod_set_value(gpiod_spk_amp, 0);

return 0; } @@ -33,9 +34,9 @@ static int e750_hp_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { if (event & SND_SOC_DAPM_PRE_PMU) - gpio_set_value(GPIO_E750_HP_AMP_OFF, 0); + gpiod_set_value(gpiod_hp_amp, 1); else if (event & SND_SOC_DAPM_POST_PMD) - gpio_set_value(GPIO_E750_HP_AMP_OFF, 1); + gpiod_set_value(gpiod_hp_amp, 0);

return 0; } @@ -100,35 +101,31 @@ static struct snd_soc_card e750 = { .fully_routed = true, };

-static struct gpio e750_audio_gpios[] = { - { GPIO_E750_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Headphone amp" }, - { GPIO_E750_SPK_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" }, -}; - static int e750_probe(struct platform_device *pdev) { struct snd_soc_card *card = &e750; int ret;

- ret = gpio_request_array(e750_audio_gpios, - ARRAY_SIZE(e750_audio_gpios)); + gpiod_hp_amp = devm_gpiod_get(&pdev->dev, "Headphone amp", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(gpiod_hp_amp); + if (ret) + return ret; + gpiod_spk_amp = devm_gpiod_get(&pdev->dev, "Speaker amp", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(gpiod_spk_amp); if (ret) return ret;

card->dev = &pdev->dev;

ret = devm_snd_soc_register_card(&pdev->dev, card); - if (ret) { + if (ret) dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); - gpio_free_array(e750_audio_gpios, ARRAY_SIZE(e750_audio_gpios)); - } return ret; }

static int e750_remove(struct platform_device *pdev) { - gpio_free_array(e750_audio_gpios, ARRAY_SIZE(e750_audio_gpios)); return 0; }

diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c index d74fcceef687..a39c494127cf 100644 --- a/sound/soc/pxa/e800_wm9712.c +++ b/sound/soc/pxa/e800_wm9712.c @@ -7,7 +7,7 @@

#include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h>

#include <sound/core.h> #include <sound/pcm.h> @@ -15,15 +15,16 @@

#include <asm/mach-types.h> #include <linux/platform_data/asoc-pxa.h> -#include <mach/eseries-gpio.h> + +static struct gpio_desc *gpiod_spk_amp, *gpiod_hp_amp;

static int e800_spk_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { if (event & SND_SOC_DAPM_PRE_PMU) - gpio_set_value(GPIO_E800_SPK_AMP_ON, 1); + gpiod_set_value(gpiod_spk_amp, 1); else if (event & SND_SOC_DAPM_POST_PMD) - gpio_set_value(GPIO_E800_SPK_AMP_ON, 0); + gpiod_set_value(gpiod_spk_amp, 0);

return 0; } @@ -32,9 +33,9 @@ static int e800_hp_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { if (event & SND_SOC_DAPM_PRE_PMU) - gpio_set_value(GPIO_E800_HP_AMP_OFF, 0); + gpiod_set_value(gpiod_hp_amp, 1); else if (event & SND_SOC_DAPM_POST_PMD) - gpio_set_value(GPIO_E800_HP_AMP_OFF, 1); + gpiod_set_value(gpiod_hp_amp, 0);

return 0; } @@ -100,35 +101,31 @@ static struct snd_soc_card e800 = { .num_dapm_routes = ARRAY_SIZE(audio_map), };

-static struct gpio e800_audio_gpios[] = { - { GPIO_E800_SPK_AMP_ON, GPIOF_OUT_INIT_HIGH, "Headphone amp" }, - { GPIO_E800_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" }, -}; - static int e800_probe(struct platform_device *pdev) { struct snd_soc_card *card = &e800; int ret;

- ret = gpio_request_array(e800_audio_gpios, - ARRAY_SIZE(e800_audio_gpios)); + gpiod_hp_amp = devm_gpiod_get(&pdev->dev, "Headphone amp", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(gpiod_hp_amp); + if (ret) + return ret; + gpiod_spk_amp = devm_gpiod_get(&pdev->dev, "Speaker amp", GPIOD_OUT_LOW); + ret = PTR_ERR_OR_ZERO(gpiod_spk_amp); if (ret) return ret;

card->dev = &pdev->dev;

ret = devm_snd_soc_register_card(&pdev->dev, card); - if (ret) { + if (ret) dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); - gpio_free_array(e800_audio_gpios, ARRAY_SIZE(e800_audio_gpios)); - } return ret; }

static int e800_remove(struct platform_device *pdev) { - gpio_free_array(e800_audio_gpios, ARRAY_SIZE(e800_audio_gpios)); return 0; }

From: Arnd Bergmann arnd@arndb.de

The magician audio driver creates a codec device and gets data from a board specific header file, both of which is a bit suspicious. Move these into the board file itself, using a gpio lookup table.

Acked-by: Mark Brown broonie@kernel.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/magician.c | 50 +++++++++++++ sound/soc/pxa/magician.c | 141 +++++++++-------------------------- 2 files changed, 87 insertions(+), 104 deletions(-)

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index d105deb1e098..598c977a8ae6 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -53,6 +53,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/spi/ads7846.h> +#include <sound/uda1380.h>

static unsigned long magician_pin_config[] __initdata = {

@@ -898,6 +899,53 @@ static struct platform_device strataflash = { }, };

+/* + * audio support + */ +static struct uda1380_platform_data uda1380_info = { + .gpio_power = EGPIO_MAGICIAN_CODEC_POWER, + .gpio_reset = EGPIO_MAGICIAN_CODEC_RESET, + .dac_clk = UDA1380_DAC_CLK_WSPLL, +}; + +static struct i2c_board_info magician_audio_i2c_board_info[] = { + { + I2C_BOARD_INFO("uda1380", 0x18), + .platform_data = &uda1380_info, + }, +}; + +static struct gpiod_lookup_table magician_audio_gpio_table = { + .dev_id = "magician-audio", + .table = { + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_SPK_POWER - MAGICIAN_EGPIO_BASE, + "SPK_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_EP_POWER - MAGICIAN_EGPIO_BASE, + "EP_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_MIC_POWER - MAGICIAN_EGPIO_BASE, + "MIC_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_IN_SEL0 - MAGICIAN_EGPIO_BASE, + "IN_SEL0", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_IN_SEL1 - MAGICIAN_EGPIO_BASE, + "IN_SEL1", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static void magician_audio_init(void) +{ + i2c_register_board_info(0, + ARRAY_AND_SIZE(magician_audio_i2c_board_info)); + + gpiod_add_lookup_table(&magician_audio_gpio_table); + platform_device_register_simple("magician-audio", -1, NULL, 0); +} + /* * PXA I2C main controller */ @@ -1048,6 +1096,8 @@ static void __init magician_init(void) gpiod_add_lookup_table(&bq24022_gpiod_table); gpiod_add_lookup_table(&gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(devices)); + + magician_audio_init(); }

MACHINE_START(MAGICIAN, "HTC Magician") diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index a5f326c97af2..9433cc927755 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -14,16 +14,14 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h>

#include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> -#include <sound/uda1380.h>

-#include <mach/magician.h> #include <asm/mach-types.h> #include "../codecs/uda1380.h" #include "pxa2xx-i2s.h" @@ -36,6 +34,9 @@ static int magician_hp_switch; static int magician_spk_switch = 1; static int magician_in_sel = MAGICIAN_MIC;

+static struct gpio_desc *gpiod_spk_power, *gpiod_ep_power, *gpiod_mic_power; +static struct gpio_desc *gpiod_in_sel0, *gpiod_in_sel1; + static void magician_ext_control(struct snd_soc_dapm_context *dapm) {

@@ -215,10 +216,10 @@ static int magician_set_input(struct snd_kcontrol *kcontrol,

switch (magician_in_sel) { case MAGICIAN_MIC: - gpio_set_value(EGPIO_MAGICIAN_IN_SEL1, 1); + gpiod_set_value(gpiod_in_sel1, 1); break; case MAGICIAN_MIC_EXT: - gpio_set_value(EGPIO_MAGICIAN_IN_SEL1, 0); + gpiod_set_value(gpiod_in_sel1, 0); }

return 1; @@ -227,21 +228,21 @@ static int magician_set_input(struct snd_kcontrol *kcontrol, static int magician_spk_power(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(EGPIO_MAGICIAN_SPK_POWER, SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_spk_power, SND_SOC_DAPM_EVENT_ON(event)); return 0; }

static int magician_hp_power(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(EGPIO_MAGICIAN_EP_POWER, SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_ep_power, SND_SOC_DAPM_EVENT_ON(event)); return 0; }

static int magician_mic_bias(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - gpio_set_value(EGPIO_MAGICIAN_MIC_POWER, SND_SOC_DAPM_EVENT_ON(event)); + gpiod_set_value(gpiod_mic_power, SND_SOC_DAPM_EVENT_ON(event)); return 0; }

@@ -328,106 +329,38 @@ static struct snd_soc_card snd_soc_card_magician = { .fully_routed = true, };

-static struct platform_device *magician_snd_device; - -/* - * FIXME: move into magician board file once merged into the pxa tree - */ -static struct uda1380_platform_data uda1380_info = { - .gpio_power = EGPIO_MAGICIAN_CODEC_POWER, - .gpio_reset = EGPIO_MAGICIAN_CODEC_RESET, - .dac_clk = UDA1380_DAC_CLK_WSPLL, -}; - -static struct i2c_board_info i2c_board_info[] = { - { - I2C_BOARD_INFO("uda1380", 0x18), - .platform_data = &uda1380_info, - }, -}; - -static int __init magician_init(void) -{ - int ret; - struct i2c_adapter *adapter; - struct i2c_client *client; - - if (!machine_is_magician()) - return -ENODEV; - - adapter = i2c_get_adapter(0); - if (!adapter) - return -ENODEV; - client = i2c_new_client_device(adapter, i2c_board_info); - i2c_put_adapter(adapter); - if (IS_ERR(client)) - return PTR_ERR(client); - - ret = gpio_request(EGPIO_MAGICIAN_SPK_POWER, "SPK_POWER"); - if (ret) - goto err_request_spk; - ret = gpio_request(EGPIO_MAGICIAN_EP_POWER, "EP_POWER"); - if (ret) - goto err_request_ep; - ret = gpio_request(EGPIO_MAGICIAN_MIC_POWER, "MIC_POWER"); - if (ret) - goto err_request_mic; - ret = gpio_request(EGPIO_MAGICIAN_IN_SEL0, "IN_SEL0"); - if (ret) - goto err_request_in_sel0; - ret = gpio_request(EGPIO_MAGICIAN_IN_SEL1, "IN_SEL1"); - if (ret) - goto err_request_in_sel1; - - gpio_set_value(EGPIO_MAGICIAN_IN_SEL0, 0); - - magician_snd_device = platform_device_alloc("soc-audio", -1); - if (!magician_snd_device) { - ret = -ENOMEM; - goto err_pdev; - } - - platform_set_drvdata(magician_snd_device, &snd_soc_card_magician); - ret = platform_device_add(magician_snd_device); - if (ret) { - platform_device_put(magician_snd_device); - goto err_pdev; - } - - return 0; - -err_pdev: - gpio_free(EGPIO_MAGICIAN_IN_SEL1); -err_request_in_sel1: - gpio_free(EGPIO_MAGICIAN_IN_SEL0); -err_request_in_sel0: - gpio_free(EGPIO_MAGICIAN_MIC_POWER); -err_request_mic: - gpio_free(EGPIO_MAGICIAN_EP_POWER); -err_request_ep: - gpio_free(EGPIO_MAGICIAN_SPK_POWER); -err_request_spk: - return ret; -} - -static void __exit magician_exit(void) +static int magician_audio_probe(struct platform_device *pdev) { - platform_device_unregister(magician_snd_device); - - gpio_set_value(EGPIO_MAGICIAN_SPK_POWER, 0); - gpio_set_value(EGPIO_MAGICIAN_EP_POWER, 0); - gpio_set_value(EGPIO_MAGICIAN_MIC_POWER, 0); - - gpio_free(EGPIO_MAGICIAN_IN_SEL1); - gpio_free(EGPIO_MAGICIAN_IN_SEL0); - gpio_free(EGPIO_MAGICIAN_MIC_POWER); - gpio_free(EGPIO_MAGICIAN_EP_POWER); - gpio_free(EGPIO_MAGICIAN_SPK_POWER); + struct device *dev = &pdev->dev; + + gpiod_spk_power = devm_gpiod_get(dev, "SPK_POWER", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_spk_power)) + return PTR_ERR(gpiod_spk_power); + gpiod_ep_power = devm_gpiod_get(dev, "EP_POWER", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_ep_power)) + return PTR_ERR(gpiod_ep_power); + gpiod_mic_power = devm_gpiod_get(dev, "MIC_POWER", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_mic_power)) + return PTR_ERR(gpiod_mic_power); + gpiod_in_sel0 = devm_gpiod_get(dev, "IN_SEL0", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_in_sel0)) + return PTR_ERR(gpiod_in_sel0); + gpiod_in_sel1 = devm_gpiod_get(dev, "IN_SEL1", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_in_sel1)) + return PTR_ERR(gpiod_in_sel1); + + snd_soc_card_magician.dev = &pdev->dev; + return devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_magician); }

-module_init(magician_init); -module_exit(magician_exit); +static struct platform_driver magician_audio_driver = { + .driver.name = "magician-audio", + .driver.pm = &snd_soc_pm_ops, + .probe = magician_audio_probe, +}; +module_platform_driver(magician_audio_driver);

MODULE_AUTHOR("Philipp Zabel"); MODULE_DESCRIPTION("ALSA SoC Magician"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:magician-audio");

From: Arnd Bergmann arnd@arndb.de

The mach/mfp.h header is only used by this one driver for hardcoded gpio numbers. Change that to use a lookup table instead.

Cc: Dmitry Torokhov dmitry.torokhov@gmail.com Cc: linux-input@vger.kernel.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Acked-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/zylonite.c | 31 +++++++++++++++++++++ drivers/input/touchscreen/zylonite-wm97xx.c | 20 +++++++------ 2 files changed, 42 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index c48dd6d03df9..ba6dc86da855 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -32,6 +32,7 @@ #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include <mach/mfp.h>

#include "devices.h" #include "generic.h" @@ -425,6 +426,35 @@ static void __init zylonite_init_ohci(void) static inline void zylonite_init_ohci(void) {} #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */

+static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio15_table = { + .dev_id = "wm97xx-touch.0", + .table = { + GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO15), + "touch", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio26_table = { + .dev_id = "wm97xx-touch.0", + .table = { + GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO26), + "touch", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static void __init zylonite_init_wm97xx_touch(void) +{ + if (!IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)) + return; + + if (cpu_is_pxa320()) + gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio15_table); + else + gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio26_table); +} + static void __init zylonite_init(void) { pxa_set_ffuart_info(NULL); @@ -450,6 +480,7 @@ static void __init zylonite_init(void) zylonite_init_nand(); zylonite_init_leds(); zylonite_init_ohci(); + zylonite_init_wm97xx_touch(); }

MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c index f57bdf083188..cabdd6e3c6f8 100644 --- a/drivers/input/touchscreen/zylonite-wm97xx.c +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -17,14 +17,13 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/soc/pxa/cpu.h> #include <linux/wm97xx.h>

-#include <mach/mfp.h> #include <mach/regs-ac97.h>

struct continuous { @@ -181,14 +180,17 @@ static struct wm97xx_mach_ops zylonite_mach_ops = { static int zylonite_wm97xx_probe(struct platform_device *pdev) { struct wm97xx *wm = platform_get_drvdata(pdev); - int gpio_touch_irq; - - if (cpu_is_pxa320()) - gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15); - else - gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26); + struct gpio_desc *gpio_touch_irq; + int err; + + gpio_touch_irq = devm_gpiod_get(&pdev->dev, "touch", GPIOD_IN); + err = PTR_ERR_OR_ZERO(gpio_touch_irq); + if (err) { + dev_err(&pdev->dev, "Cannot get irq gpio: %d\n", err); + return err; + }

- wm->pen_irq = gpio_to_irq(gpio_touch_irq); + wm->pen_irq = gpiod_to_irq(gpio_touch_irq); irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);

wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,

From: Arnd Bergmann arnd@arndb.de

The two drivers are almost identical and can work on a variety of hardware in principle. The mainstone driver supports additional hardware, and the zylonite driver has a few cleanup patches.

Sync the two by adding the zylonite changes into the mainstone one, and checking for the zylonite board to order to keep the default behavior (interrupt enabled) there.

Acked-by: Dmitry Torokhov dmitry.torokhov@gmail.com Cc: linux-input@vger.kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- drivers/input/touchscreen/mainstone-wm97xx.c | 59 ++++++++++---------- 1 file changed, 31 insertions(+), 28 deletions(-)

diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 618c80847d9f..940d3c92b1f8 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -24,9 +24,9 @@ #include <linux/gpio/consumer.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/wm97xx.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/soc/pxa/cpu.h> +#include <linux/wm97xx.h>

#include <mach/regs-ac97.h>

@@ -42,23 +42,22 @@ struct continuous { #define WM_READS(sp) ((sp / HZ) + 1)

static const struct continuous cinfo[] = { - {WM9705_ID2, 0, WM_READS(94), 94}, - {WM9705_ID2, 1, WM_READS(188), 188}, - {WM9705_ID2, 2, WM_READS(375), 375}, - {WM9705_ID2, 3, WM_READS(750), 750}, - {WM9712_ID2, 0, WM_READS(94), 94}, - {WM9712_ID2, 1, WM_READS(188), 188}, - {WM9712_ID2, 2, WM_READS(375), 375}, - {WM9712_ID2, 3, WM_READS(750), 750}, - {WM9713_ID2, 0, WM_READS(94), 94}, - {WM9713_ID2, 1, WM_READS(120), 120}, - {WM9713_ID2, 2, WM_READS(154), 154}, - {WM9713_ID2, 3, WM_READS(188), 188}, + { WM9705_ID2, 0, WM_READS(94), 94 }, + { WM9705_ID2, 1, WM_READS(188), 188 }, + { WM9705_ID2, 2, WM_READS(375), 375 }, + { WM9705_ID2, 3, WM_READS(750), 750 }, + { WM9712_ID2, 0, WM_READS(94), 94 }, + { WM9712_ID2, 1, WM_READS(188), 188 }, + { WM9712_ID2, 2, WM_READS(375), 375 }, + { WM9712_ID2, 3, WM_READS(750), 750 }, + { WM9713_ID2, 0, WM_READS(94), 94 }, + { WM9713_ID2, 1, WM_READS(120), 120 }, + { WM9713_ID2, 2, WM_READS(154), 154 }, + { WM9713_ID2, 3, WM_READS(188), 188 }, };

/* continuous speed index */ static int sp_idx; -static u16 last, tries; static struct gpio_desc *gpiod_irq;

/* @@ -102,7 +101,7 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm) { unsigned int count;

- schedule_timeout_uninterruptible(1); + msleep(1);

if (cpu_is_pxa27x()) { while (MISR & (1 << 2)) @@ -117,13 +116,14 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) { u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES; int reads = 0; + static u16 last, tries;

/* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low * threshold set to use the notifications it gives. */ - schedule_timeout_uninterruptible(1); + msleep(1);

if (tries > 5) { tries = 0; @@ -193,6 +193,8 @@ static int wm97xx_acc_startup(struct wm97xx *wm) /* There is some obscure mutant of WM9712 interbred with WM9713 * used on Palm HW */ wm->variant = WM97xx_WM1613; + } else if (machine_is_zylonite()) { + pen_int = 1; }

if (pen_int) { @@ -253,13 +255,13 @@ static void wm97xx_irq_enable(struct wm97xx *wm, int enable) }

static struct wm97xx_mach_ops mainstone_mach_ops = { - .acc_enabled = 1, - .acc_pen_up = wm97xx_acc_pen_up, - .acc_pen_down = wm97xx_acc_pen_down, - .acc_startup = wm97xx_acc_startup, - .acc_shutdown = wm97xx_acc_shutdown, - .irq_enable = wm97xx_irq_enable, - .irq_gpio = WM97XX_GPIO_2, + .acc_enabled = 1, + .acc_pen_up = wm97xx_acc_pen_up, + .acc_pen_down = wm97xx_acc_pen_down, + .acc_startup = wm97xx_acc_startup, + .acc_shutdown = wm97xx_acc_shutdown, + .irq_enable = wm97xx_irq_enable, + .irq_gpio = WM97XX_GPIO_2, };

static int mainstone_wm97xx_probe(struct platform_device *pdev) @@ -274,14 +276,15 @@ static int mainstone_wm97xx_remove(struct platform_device *pdev) struct wm97xx *wm = platform_get_drvdata(pdev);

wm97xx_unregister_mach_ops(wm); + return 0; }

static struct platform_driver mainstone_wm97xx_driver = { - .probe = mainstone_wm97xx_probe, - .remove = mainstone_wm97xx_remove, - .driver = { - .name = "wm97xx-touch", + .probe = mainstone_wm97xx_probe, + .remove = mainstone_wm97xx_remove, + .driver = { + .name = "wm97xx-touch", }, }; module_platform_driver(mainstone_wm97xx_driver);

From: Dmitry Torokhov dmitry.torokhov@gmail.com

Instead of manually disabling and enabling interrupts and scheduling work to access the device, let's use threaded oneshot interrupt handler. It simplifies things.

Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann arnd@arndb.de --- drivers/input/touchscreen/wm97xx-core.c | 42 +++++-------------------- include/linux/wm97xx.h | 1 - 2 files changed, 7 insertions(+), 36 deletions(-)

diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 1b58611c8084..2757c7768ffe 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -285,11 +285,12 @@ void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode) EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);

/* - * Handle a pen down interrupt. + * Codec PENDOWN irq handler + * */ -static void wm97xx_pen_irq_worker(struct work_struct *work) +static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) { - struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work); + struct wm97xx *wm = dev_id; int pen_was_down = wm->pen_is_down;

/* do we need to enable the touch panel reader */ @@ -343,27 +344,6 @@ static void wm97xx_pen_irq_worker(struct work_struct *work) if (!wm->pen_is_down && wm->mach_ops->acc_enabled) wm->mach_ops->acc_pen_up(wm);

- wm->mach_ops->irq_enable(wm, 1); -} - -/* - * Codec PENDOWN irq handler - * - * We have to disable the codec interrupt in the handler because it - * can take up to 1ms to clear the interrupt source. We schedule a task - * in a work queue to do the actual interaction with the chip. The - * interrupt is then enabled again in the slow handler when the source - * has been cleared. - */ -static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) -{ - struct wm97xx *wm = dev_id; - - if (!work_pending(&wm->pen_event_work)) { - wm->mach_ops->irq_enable(wm, 0); - queue_work(wm->ts_workq, &wm->pen_event_work); - } - return IRQ_HANDLED; }

@@ -374,12 +354,9 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm) { u16 reg;

- /* If an interrupt is supplied an IRQ enable operation must also be - * provided. */ - BUG_ON(!wm->mach_ops->irq_enable); - - if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, - "wm97xx-pen", wm)) { + if (request_threaded_irq(wm->pen_irq, NULL, wm97xx_pen_interrupt, + IRQF_SHARED | IRQF_ONESHOT, + "wm97xx-pen", wm)) { dev_err(wm->dev, "Failed to register pen down interrupt, polling"); wm->pen_irq = 0; @@ -509,7 +486,6 @@ static int wm97xx_ts_input_open(struct input_dev *idev) wm->codec->dig_enable(wm, 1);

INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader); - INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker);

wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1; if (wm->ts_reader_min_interval < 1) @@ -560,10 +536,6 @@ static void wm97xx_ts_input_close(struct input_dev *idev)

wm->pen_is_down = 0;

- /* Balance out interrupt disables/enables */ - if (cancel_work_sync(&wm->pen_event_work)) - wm->mach_ops->irq_enable(wm, 1); - /* ts_reader rearms itself so we need to explicitly stop it * before we destroy the workqueue. */ diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 462854f4f286..85bd8dd3caea 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -281,7 +281,6 @@ struct wm97xx { unsigned long ts_reader_min_interval; /* Minimum interval */ unsigned int pen_irq; /* Pen IRQ number in use */ struct workqueue_struct *ts_workq; - struct work_struct pen_event_work; u16 acc_slot; /* AC97 slot used for acc touch data */ u16 acc_rate; /* acc touch data rate */ unsigned pen_is_down:1; /* Pen is down */

From: Arnd Bergmann arnd@arndb.de

The driver currently takes the hardwired FIFO address from a header file that we want to eliminate. Change it to use the mmio resource instead and stop including the here.

Acked-by: Mark Brown broonie@kernel.org Cc: alsa-devel@alsa-project.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Signed-off-by: Arnd Bergmann arnd@arndb.de --- sound/soc/pxa/pxa2xx-ac97.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 9443c1390d2f..809ea34736ed 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -21,10 +21,12 @@ #include <sound/pxa2xx-lib.h> #include <sound/dmaengine_pcm.h>

-#include <mach/pxa-regs.h> -#include <mach/regs-ac97.h> #include <linux/platform_data/asoc-pxa.h>

+#define PCDR 0x0040 /* PCM FIFO Data Register */ +#define MODR 0x0140 /* Modem FIFO Data Register */ +#define MCDR 0x0060 /* Mic-in FIFO Data Register */ + static void pxa2xx_ac97_warm_reset(struct ac97_controller *adrv) { pxa2xx_ac97_try_warm_reset(); @@ -59,35 +61,30 @@ static struct ac97_controller_ops pxa2xx_ac97_ops = { };

static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = { - .addr = __PREG(PCDR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, .chan_name = "pcm_pcm_stereo_in", .maxburst = 32, };

static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = { - .addr = __PREG(PCDR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, .chan_name = "pcm_pcm_stereo_out", .maxburst = 32, };

static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = { - .addr = __PREG(MODR), .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, .chan_name = "pcm_aux_mono_out", .maxburst = 16, };

static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = { - .addr = __PREG(MODR), .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, .chan_name = "pcm_aux_mono_in", .maxburst = 16, };

static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = { - .addr = __PREG(MCDR), .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, .chan_name = "pcm_aux_mic_mono", .maxburst = 16, @@ -226,6 +223,7 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) int ret; struct ac97_controller *ctrl; pxa2xx_audio_ops_t *pdata = pdev->dev.platform_data; + struct resource *regs; void **codecs_pdata;

if (pdev->id != -1) { @@ -233,6 +231,16 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) return -ENXIO; }

+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + + pxa2xx_ac97_pcm_stereo_in.addr = regs->start + PCDR; + pxa2xx_ac97_pcm_stereo_out.addr = regs->start + PCDR; + pxa2xx_ac97_pcm_aux_mono_out.addr = regs->start + MODR; + pxa2xx_ac97_pcm_aux_mono_in.addr = regs->start + MODR; + pxa2xx_ac97_pcm_mic_mono_in.addr = regs->start + MCDR; + ret = pxa2xx_ac97_hw_probe(pdev); if (ret) { dev_err(&pdev->dev, "PXA2xx AC97 hw probe error (%d)\n", ret);

From: Arnd Bergmann arnd@arndb.de

To avoid dereferencing hardwired constant pointers from a global header file, change the driver to use devm_platform_ioremap_resource for getting an __iomem pointer, and then using readl/writel on that.

Each pointer dereference gets changed by a search&replace, which leads to a few overlong lines, but seems less risky than trying to clean up the code at the same time.

Acked-by: Mark Brown broonie@kernel.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- sound/soc/pxa/pxa2xx-i2s.c | 110 +++++++++++++++++++++---------------- 1 file changed, 62 insertions(+), 48 deletions(-)

diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 5164c60ba89f..746e6ec9198b 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -21,7 +21,6 @@ #include <sound/pxa2xx-lib.h> #include <sound/dmaengine_pcm.h>

-#include <mach/pxa-regs.h> #include <linux/platform_data/asoc-pxa.h>

#include "pxa2xx-i2s.h" @@ -29,13 +28,13 @@ /* * I2S Controller Register and Bit Definitions */ -#define SACR0 __REG(0x40400000) /* Global Control Register */ -#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ -#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ -#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ -#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ -#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ +#define SACR0 (0x0000) /* Global Control Register */ +#define SACR1 (0x0004) /* Serial Audio I 2 S/MSB-Justified Control Register */ +#define SASR0 (0x000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ +#define SAIMR (0x0014) /* Serial Audio Interrupt Mask Register */ +#define SAICR (0x0018) /* Serial Audio Interrupt Clear Register */ +#define SADIV (0x0060) /* Audio Clock Divider Register. */ +#define SADR (0x0080) /* Serial Audio Data Register (TX and RX FIFO access Register). */

#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ #define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ @@ -77,16 +76,15 @@ struct pxa_i2s_port { static struct pxa_i2s_port pxa_i2s; static struct clk *clk_i2s; static int clk_ena = 0; +static void __iomem *i2s_reg_base;

static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = { - .addr = __PREG(SADR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, .chan_name = "tx", .maxburst = 32, };

static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = { - .addr = __PREG(SADR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, .chan_name = "rx", .maxburst = 32, @@ -102,7 +100,7 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream, return PTR_ERR(clk_i2s);

if (!snd_soc_dai_active(cpu_dai)) - SACR0 = 0; + writel(0, i2s_reg_base + SACR0);

return 0; } @@ -114,7 +112,7 @@ static int pxa_i2s_wait(void)

/* flush the Rx FIFO */ for (i = 0; i < 16; i++) - SADR; + readl(i2s_reg_base + SADR); return 0; }

@@ -174,39 +172,39 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,

/* is port used by another stream */ if (!(SACR0 & SACR0_ENB)) { - SACR0 = 0; + writel(0, i2s_reg_base + SACR0); if (pxa_i2s.master) - SACR0 |= SACR0_BCKD; + writel(readl(i2s_reg_base + SACR0) | (SACR0_BCKD), i2s_reg_base + SACR0);

- SACR0 |= SACR0_RFTH(14) | SACR0_TFTH(1); - SACR1 |= pxa_i2s.fmt; + writel(readl(i2s_reg_base + SACR0) | (SACR0_RFTH(14) | SACR0_TFTH(1)), i2s_reg_base + SACR0); + writel(readl(i2s_reg_base + SACR1) | (pxa_i2s.fmt), i2s_reg_base + SACR1); } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - SAIMR |= SAIMR_TFS; + writel(readl(i2s_reg_base + SAIMR) | (SAIMR_TFS), i2s_reg_base + SAIMR); else - SAIMR |= SAIMR_RFS; + writel(readl(i2s_reg_base + SAIMR) | (SAIMR_RFS), i2s_reg_base + SAIMR);

switch (params_rate(params)) { case 8000: - SADIV = 0x48; + writel(0x48, i2s_reg_base + SADIV); break; case 11025: - SADIV = 0x34; + writel(0x34, i2s_reg_base + SADIV); break; case 16000: - SADIV = 0x24; + writel(0x24, i2s_reg_base + SADIV); break; case 22050: - SADIV = 0x1a; + writel(0x1a, i2s_reg_base + SADIV); break; case 44100: - SADIV = 0xd; + writel(0xd, i2s_reg_base + SADIV); break; case 48000: - SADIV = 0xc; + writel(0xc, i2s_reg_base + SADIV); break; case 96000: /* not in manual and possibly slightly inaccurate */ - SADIV = 0x6; + writel(0x6, i2s_reg_base + SADIV); break; }

@@ -221,10 +219,10 @@ static int pxa2xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd, switch (cmd) { case SNDRV_PCM_TRIGGER_START: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - SACR1 &= ~SACR1_DRPL; + writel(readl(i2s_reg_base + SACR1) & (~SACR1_DRPL), i2s_reg_base + SACR1); else - SACR1 &= ~SACR1_DREC; - SACR0 |= SACR0_ENB; + writel(readl(i2s_reg_base + SACR1) & (~SACR1_DREC), i2s_reg_base + SACR1); + writel(readl(i2s_reg_base + SACR0) | (SACR0_ENB), i2s_reg_base + SACR0); break; case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: @@ -243,15 +241,15 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - SACR1 |= SACR1_DRPL; - SAIMR &= ~SAIMR_TFS; + writel(readl(i2s_reg_base + SACR1) | (SACR1_DRPL), i2s_reg_base + SACR1); + writel(readl(i2s_reg_base + SAIMR) & (~SAIMR_TFS), i2s_reg_base + SAIMR); } else { - SACR1 |= SACR1_DREC; - SAIMR &= ~SAIMR_RFS; + writel(readl(i2s_reg_base + SACR1) | (SACR1_DREC), i2s_reg_base + SACR1); + writel(readl(i2s_reg_base + SAIMR) & (~SAIMR_RFS), i2s_reg_base + SAIMR); }

- if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) { - SACR0 &= ~SACR0_ENB; + if ((readl(i2s_reg_base + SACR1) & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) { + writel(readl(i2s_reg_base + SACR0) & (~SACR0_ENB), i2s_reg_base + SACR0); pxa_i2s_wait(); if (clk_ena) { clk_disable_unprepare(clk_i2s); @@ -264,13 +262,13 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream, static int pxa2xx_soc_pcm_suspend(struct snd_soc_component *component) { /* store registers */ - pxa_i2s.sacr0 = SACR0; - pxa_i2s.sacr1 = SACR1; - pxa_i2s.saimr = SAIMR; - pxa_i2s.sadiv = SADIV; + pxa_i2s.sacr0 = readl(i2s_reg_base + SACR0); + pxa_i2s.sacr1 = readl(i2s_reg_base + SACR1); + pxa_i2s.saimr = readl(i2s_reg_base + SAIMR); + pxa_i2s.sadiv = readl(i2s_reg_base + SADIV);

/* deactivate link */ - SACR0 &= ~SACR0_ENB; + writel(readl(i2s_reg_base + SACR0) & (~SACR0_ENB), i2s_reg_base + SACR0); pxa_i2s_wait(); return 0; } @@ -279,12 +277,12 @@ static int pxa2xx_soc_pcm_resume(struct snd_soc_component *component) { pxa_i2s_wait();

- SACR0 = pxa_i2s.sacr0 & ~SACR0_ENB; - SACR1 = pxa_i2s.sacr1; - SAIMR = pxa_i2s.saimr; - SADIV = pxa_i2s.sadiv; + writel(pxa_i2s.sacr0 & ~SACR0_ENB, i2s_reg_base + SACR0); + writel(pxa_i2s.sacr1, i2s_reg_base + SACR1); + writel(pxa_i2s.saimr, i2s_reg_base + SAIMR); + writel(pxa_i2s.sadiv, i2s_reg_base + SADIV);

- SACR0 = pxa_i2s.sacr0; + writel(pxa_i2s.sacr0, i2s_reg_base + SACR0);

return 0; } @@ -306,12 +304,12 @@ static int pxa2xx_i2s_probe(struct snd_soc_dai *dai) * the SACR0[RST] bit must also be set and cleared to reset all * I2S controller registers. */ - SACR0 = SACR0_RST; - SACR0 = 0; + writel(SACR0_RST, i2s_reg_base + SACR0); + writel(0, i2s_reg_base + SACR0); /* Make sure RPL and REC are disabled */ - SACR1 = SACR1_DRPL | SACR1_DREC; + writel(SACR1_DRPL | SACR1_DREC, i2s_reg_base + SACR1); /* Along with FIFO servicing */ - SAIMR &= ~(SAIMR_RFS | SAIMR_TFS); + writel(readl(i2s_reg_base + SAIMR) & (~(SAIMR_RFS | SAIMR_TFS)), i2s_reg_base + SAIMR);

snd_soc_dai_init_dma_data(dai, &pxa2xx_i2s_pcm_stereo_out, &pxa2xx_i2s_pcm_stereo_in); @@ -371,6 +369,22 @@ static const struct snd_soc_component_driver pxa_i2s_component = {

static int pxa2xx_i2s_drv_probe(struct platform_device *pdev) { + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!res) { + dev_err(&pdev->dev, "missing MMIO resource\n"); + return -ENXIO; + } + + i2s_reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2s_reg_base)) { + dev_err(&pdev->dev, "ioremap failed\n"); + return PTR_ERR(i2s_reg_base); + } + + pxa2xx_i2s_pcm_stereo_out.addr = res->start + SADR; + pxa2xx_i2s_pcm_stereo_in.addr = res->start + SADR; + return devm_snd_soc_register_component(&pdev->dev, &pxa_i2s_component, &pxa_i2s_dai, 1); }

From: Arnd Bergmann arnd@arndb.de

get_clk_frequency_khz() is not a proper name for a global function, and there is only one caller.

Convert viper to use the properly namespaced pxa25x_get_clk_frequency_khz() and remove the other references.

Acked-by: Viresh Kumar viresh.kumar@linaro.org Acked-by: Robert Jarzmik robert.jarzmik@free.fr Cc: linux-pm@vger.kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/generic.c | 15 --------------- arch/arm/mach-pxa/generic.h | 1 - arch/arm/mach-pxa/viper.c | 2 +- drivers/cpufreq/pxa2xx-cpufreq.c | 2 -- 4 files changed, 1 insertion(+), 19 deletions(-)

diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index fe1d55d328e5..2c2c82fcf9cb 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -55,21 +55,6 @@ void __init pxa_timer_init(void) pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000)); }

-/* - * Get the clock frequency as reflected by CCCR and the turbo flag. - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ -unsigned int get_clk_frequency_khz(int info) -{ - if (cpu_is_pxa25x()) - return pxa25x_get_clk_frequency_khz(info); - else if (cpu_is_pxa27x()) - return pxa27x_get_clk_frequency_khz(info); - return 0; -} -EXPORT_SYMBOL(get_clk_frequency_khz); - void pxa_smemc_set_pcmcia_timing(int sock, u32 mcmem, u32 mcatt, u32 mcio) { __raw_writel(mcmem, MCMEM(sock)); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 67925d3ea026..2f706ef97357 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -11,7 +11,6 @@

struct irq_data;

-extern unsigned int get_clk_frequency_khz(int info); extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 600d9e80b00c..0782f0ed5a6e 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -851,7 +851,7 @@ static void __init viper_init_vcore_gpios(void) goto err_dir;

/* c/should assume redboot set the correct level ??? */ - viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1); + viper_set_core_cpu_voltage(pxa25x_get_clk_frequency_khz(0), 1);

return;

diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 0f0e676ff781..e74d36d6f78d 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -107,8 +107,6 @@ static struct pxa_freqs pxa27x_freqs[] = { static struct cpufreq_frequency_table pxa27x_freq_table[NUM_PXA27x_FREQS+1];

-extern unsigned get_clk_frequency_khz(int info); - #ifdef CONFIG_REGULATOR

static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)

From: Arnd Bergmann arnd@arndb.de

We have three power supplies that need similar initialization. As a preparation for the gpio lookup table conversion, split out the initialization into a separate function.

Reviewed-by: Sebastian Reichel sre@kernel.org Acked-by: Sebastian Reichel sre@kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- drivers/power/supply/tosa_battery.c | 50 ++++++++++++++--------------- 1 file changed, 24 insertions(+), 26 deletions(-)

diff --git a/drivers/power/supply/tosa_battery.c b/drivers/power/supply/tosa_battery.c index 32cc31cd4761..b26b0eca33e1 100644 --- a/drivers/power/supply/tosa_battery.c +++ b/drivers/power/supply/tosa_battery.c @@ -343,12 +343,24 @@ static int tosa_bat_resume(struct platform_device *dev) #define tosa_bat_resume NULL #endif

+static int tosa_power_supply_register(struct device *dev, + struct tosa_bat *bat, + const struct power_supply_desc *desc) +{ + struct power_supply_config cfg = { + .drv_data = bat, + }; + + mutex_init(&bat->work_lock); + bat->psy = power_supply_register(dev, desc, &cfg); + + return PTR_ERR_OR_ZERO(bat->psy); +} + + static int tosa_bat_probe(struct platform_device *dev) { int ret; - struct power_supply_config main_psy_cfg = {}, - jacket_psy_cfg = {}, - bu_psy_cfg = {};

if (!machine_is_tosa()) return -ENODEV; @@ -357,36 +369,22 @@ static int tosa_bat_probe(struct platform_device *dev) if (ret) return ret;

- mutex_init(&tosa_bat_main.work_lock); - mutex_init(&tosa_bat_jacket.work_lock); - INIT_WORK(&bat_work, tosa_bat_work);

- main_psy_cfg.drv_data = &tosa_bat_main; - tosa_bat_main.psy = power_supply_register(&dev->dev, - &tosa_bat_main_desc, - &main_psy_cfg); - if (IS_ERR(tosa_bat_main.psy)) { - ret = PTR_ERR(tosa_bat_main.psy); + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_main, + &tosa_bat_main_desc); + if (ret) goto err_psy_reg_main; - }

- jacket_psy_cfg.drv_data = &tosa_bat_jacket; - tosa_bat_jacket.psy = power_supply_register(&dev->dev, - &tosa_bat_jacket_desc, - &jacket_psy_cfg); - if (IS_ERR(tosa_bat_jacket.psy)) { - ret = PTR_ERR(tosa_bat_jacket.psy); + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_jacket, + &tosa_bat_jacket_desc); + if (ret) goto err_psy_reg_jacket; - }

- bu_psy_cfg.drv_data = &tosa_bat_bu; - tosa_bat_bu.psy = power_supply_register(&dev->dev, &tosa_bat_bu_desc, - &bu_psy_cfg); - if (IS_ERR(tosa_bat_bu.psy)) { - ret = PTR_ERR(tosa_bat_bu.psy); + ret = tosa_power_supply_register(&dev->dev, &tosa_bat_bu, + &tosa_bat_bu_desc); + if (ret) goto err_psy_reg_bu; - }

ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), tosa_bat_gpio_isr,

From: Arnd Bergmann arnd@arndb.de

There are two tavorevb boards in the kernel, one using a PXA930 chip in mach-pxa, and one using the later PXA910 chip in mach-mmp. They use the same board number, which is generally a bad idea, and in a multiplatform kernel, we can end up with funny link errors like this one resulting from two boards gettting controlled by the same Kconfig symbol:

arch/arm/mach-mmp/tavorevb.o: In function `tavorevb_init': tavorevb.c:(.init.text+0x4c): undefined reference to `pxa910_device_uart1' tavorevb.c:(.init.text+0x50): undefined reference to `pxa910_device_gpio' tavorevb.o:(.arch.info.init+0x54): undefined reference to `pxa910_init_irq' tavorevb.o:(.arch.info.init+0x58): undefined reference to `pxa910_timer_init'

The mach-pxa TavorEVB seems much more complete than the mach-mmp one that supports only uart, gpio and ethernet. Further, I could find no information about the board on the internet aside from references to the Linux kernel, so I assume this was never available outside of Marvell and can be removed entirely.

There is a third board named TavorEVB in the Kconfig description, but this refers to the "TTC_DKB" machine. The two are clearly related, so I change the Kconfig description to just list both names.

Cc: Lubomir Rintel lkundrak@v3.sk Reviewed-by: Lubomir Rintel lkundrak@v3.sk Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-mmp/Kconfig | 10 +--- arch/arm/mach-mmp/Makefile | 1 - arch/arm/mach-mmp/tavorevb.c | 113 ----------------------------------- 3 files changed, 1 insertion(+), 123 deletions(-) delete mode 100644 arch/arm/mach-mmp/tavorevb.c

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 0dd999212944..92a730a573b9 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -39,16 +39,8 @@ config MACH_AVENGERS_LITE Say 'Y' here if you want to support the Marvell PXA168-based Avengers Lite Development Board.

-config MACH_TAVOREVB - bool "Marvell's PXA910 TavorEVB Development Board" - depends on ARCH_MULTI_V5 - select CPU_PXA910 - help - Say 'Y' here if you want to support the Marvell PXA910-based - TavorEVB Development Board. - config MACH_TTC_DKB - bool "Marvell's PXA910 TavorEVB Development Board" + bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board" depends on ARCH_MULTI_V5 select CPU_PXA910 help diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index e3758f7e1fe7..81338db77ec7 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -24,7 +24,6 @@ endif obj-$(CONFIG_MACH_ASPENITE) += aspenite.o obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o -obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c deleted file mode 100644 index 3261d2322198..000000000000 --- a/arch/arm/mach-mmp/tavorevb.c +++ /dev/null @@ -1,113 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-mmp/tavorevb.c - * - * Support for the Marvell PXA910-based TavorEVB Development Platform. - */ -#include <linux/gpio.h> -#include <linux/gpio-pxa.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/smc91x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include "addr-map.h" -#include "mfp-pxa910.h" -#include "pxa910.h" -#include "irqs.h" - -#include "common.h" - -static unsigned long tavorevb_pin_config[] __initdata = { - /* UART2 */ - GPIO47_UART2_RXD, - GPIO48_UART2_TXD, - - /* SMC */ - SM_nCS0_nCS0, - SM_ADV_SM_ADV, - SM_SCLK_SM_SCLK, - SM_SCLK_SM_SCLK, - SM_BE0_SM_BE0, - SM_BE1_SM_BE1, - - /* DFI */ - DF_IO0_ND_IO0, - DF_IO1_ND_IO1, - DF_IO2_ND_IO2, - DF_IO3_ND_IO3, - DF_IO4_ND_IO4, - DF_IO5_ND_IO5, - DF_IO6_ND_IO6, - DF_IO7_ND_IO7, - DF_IO8_ND_IO8, - DF_IO9_ND_IO9, - DF_IO10_ND_IO10, - DF_IO11_ND_IO11, - DF_IO12_ND_IO12, - DF_IO13_ND_IO13, - DF_IO14_ND_IO14, - DF_IO15_ND_IO15, - DF_nCS0_SM_nCS2_nCS0, - DF_ALE_SM_WEn_ND_ALE, - DF_CLE_SM_OEn_ND_CLE, - DF_WEn_DF_WEn, - DF_REn_DF_REn, - DF_RDY0_DF_RDY0, -}; - -static struct pxa_gpio_platform_data pxa910_gpio_pdata = { - .irq_base = MMP_GPIO_TO_IRQ(0), -}; - -static struct smc91x_platdata tavorevb_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = SMC_CS1_PHYS_BASE + 0x300, - .end = SMC_CS1_PHYS_BASE + 0xfffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MMP_GPIO_TO_IRQ(80), - .end = MMP_GPIO_TO_IRQ(80), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &tavorevb_smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static void __init tavorevb_init(void) -{ - mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config)); - - /* on-chip devices */ - pxa910_add_uart(1); - platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, - sizeof(struct pxa_gpio_platform_data)); - platform_device_register(&pxa910_device_gpio); - - /* off-chip devices */ - platform_device_register(&smc91x_device); -} - -MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") - .map_io = mmp_map_io, - .nr_irqs = MMP_NR_IRQS, - .init_irq = pxa910_init_irq, - .init_time = pxa910_timer_init, - .init_machine = tavorevb_init, - .restart = mmp_restart, -MACHINE_END

From: Arnd Bergmann arnd@arndb.de

There are two drivers in arch/arm/plat-pxa: mfp and ssp. Both of them should ideally not be needed at all, as there are proper subsystems to replace them.

OTOH, they are self-contained and can simply be normal SoC drivers, so move them over there to eliminate one more of the plat-* directories.

Acked-by: Robert Jarzmik robert.jarzmik@free.fr (mach-pxa) Acked-by: Lubomir Rintel lkundrak@v3.sk (mach-mmp) Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/Kconfig | 4 ---- arch/arm/Makefile | 1 - arch/arm/mach-mmp/mfp.h | 2 +- arch/arm/mach-pxa/include/mach/mfp.h | 2 +- arch/arm/mach-pxa/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.h | 2 +- drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + {arch/arm/plat-pxa => drivers/soc/pxa}/Kconfig | 5 ++--- {arch/arm/plat-pxa => drivers/soc/pxa}/Makefile | 4 ---- {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c | 2 +- {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c | 0 .../plat-pxa/include/plat => include/linux/soc/pxa}/mfp.h | 6 ++---- 13 files changed, 11 insertions(+), 21 deletions(-) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Kconfig (83%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Makefile (51%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c (99%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c (100%) rename {arch/arm/plat-pxa/include/plat => include/linux/soc/pxa}/mfp.h (98%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2e8091e2d8a8..eef8cbf20045 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -667,7 +667,6 @@ source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/mach-oxnas/Kconfig"

source "arch/arm/mach-pxa/Kconfig" -source "arch/arm/plat-pxa/Kconfig"

source "arch/arm/mach-qcom/Kconfig"

@@ -753,9 +752,6 @@ config PLAT_ORION_LEGACY bool select PLAT_ORION

-config PLAT_PXA - bool - config PLAT_VERSATILE bool

diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a2391b8de5a5..206a900fc87c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -230,7 +230,6 @@ machine-$(CONFIG_PLAT_SPEAR) += spear # by CONFIG_* macro name. plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_PLAT_ORION) += orion -plat-$(CONFIG_PLAT_PXA) += pxa plat-$(CONFIG_PLAT_VERSATILE) += versatile

# The byte offset of the kernel image in RAM from the start of RAM. diff --git a/arch/arm/mach-mmp/mfp.h b/arch/arm/mach-mmp/mfp.h index 75a4acb33b1b..6f3057987756 100644 --- a/arch/arm/mach-mmp/mfp.h +++ b/arch/arm/mach-mmp/mfp.h @@ -2,7 +2,7 @@ #ifndef __ASM_MACH_MFP_H #define __ASM_MACH_MFP_H

-#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h>

/* * NOTE: the MFPR register bit definitions on PXA168 processor lines are a diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h index dbb961fb570e..7e0879bd4102 100644 --- a/arch/arm/mach-pxa/include/mach/mfp.h +++ b/arch/arm/mach-pxa/include/mach/mfp.h @@ -13,6 +13,6 @@ #ifndef __ASM_ARCH_MFP_H #define __ASM_ARCH_MFP_H

-#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h>

#endif /* __ASM_ARCH_MFP_H */ diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h index 980145e7ee99..683a3ea5f154 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/mfp-pxa2xx.h @@ -2,7 +2,7 @@ #ifndef __ASM_ARCH_MFP_PXA2XX_H #define __ASM_ARCH_MFP_PXA2XX_H

-#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h>

/* * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h index cdd830926d1c..81fec4fa5a0f 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.h +++ b/arch/arm/mach-pxa/mfp-pxa3xx.h @@ -2,7 +2,7 @@ #ifndef __ASM_ARCH_MFP_PXA3XX_H #define __ASM_ARCH_MFP_PXA3XX_H

-#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h>

#define MFPR_BASE (0x40e10000)

diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index c5aae42673d3..86ccf5970bc1 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -14,6 +14,7 @@ source "drivers/soc/ixp4xx/Kconfig" source "drivers/soc/litex/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/microchip/Kconfig" +source "drivers/soc/pxa/Kconfig" source "drivers/soc/qcom/Kconfig" source "drivers/soc/renesas/Kconfig" source "drivers/soc/rockchip/Kconfig" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 904eec2a7871..fd7717d597fc 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_SOC_XWAY) += lantiq/ obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/ obj-y += mediatek/ obj-y += microchip/ +obj-y += pxa/ obj-y += amlogic/ obj-y += qcom/ obj-y += renesas/ diff --git a/arch/arm/plat-pxa/Kconfig b/drivers/soc/pxa/Kconfig similarity index 83% rename from arch/arm/plat-pxa/Kconfig rename to drivers/soc/pxa/Kconfig index 6f7a0a39c2b9..c5c265aa4f07 100644 --- a/arch/arm/plat-pxa/Kconfig +++ b/drivers/soc/pxa/Kconfig @@ -1,9 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only -if PLAT_PXA +config PLAT_PXA + bool

config PXA_SSP tristate help Enable support for PXA2xx SSP ports - -endif diff --git a/arch/arm/plat-pxa/Makefile b/drivers/soc/pxa/Makefile similarity index 51% rename from arch/arm/plat-pxa/Makefile rename to drivers/soc/pxa/Makefile index 349ea0af8450..413deceddbdd 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/drivers/soc/pxa/Makefile @@ -1,8 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for code common across different PXA processor families -# -ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include

obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/arch/arm/plat-pxa/mfp.c b/drivers/soc/pxa/mfp.c similarity index 99% rename from arch/arm/plat-pxa/mfp.c rename to drivers/soc/pxa/mfp.c index 17fc4f33f35b..6220ba321cfc 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/drivers/soc/pxa/mfp.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/io.h>

-#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h>

#define MFPR_SIZE (PAGE_SIZE)

diff --git a/arch/arm/plat-pxa/ssp.c b/drivers/soc/pxa/ssp.c similarity index 100% rename from arch/arm/plat-pxa/ssp.c rename to drivers/soc/pxa/ssp.c diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/include/linux/soc/pxa/mfp.h similarity index 98% rename from arch/arm/plat-pxa/include/plat/mfp.h rename to include/linux/soc/pxa/mfp.h index 3accaa9ee781..39779cbed0c0 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/include/linux/soc/pxa/mfp.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/plat-pxa/include/plat/mfp.h - * * Common Multi-Function Pin Definitions * * Copyright (C) 2007 Marvell International Ltd. @@ -453,8 +451,8 @@ struct mfp_addr_map {

#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }

-void __init mfp_init_base(void __iomem *mfpr_base); -void __init mfp_init_addr(struct mfp_addr_map *map); +void mfp_init_base(void __iomem *mfpr_base); +void mfp_init_addr(struct mfp_addr_map *map);

/* * mfp_{read, write}() - for direct read/write access to the MFPR register

From: Arnd Bergmann arnd@arndb.de

None of the headers are included from outside of the mach-pxa directory, so move them all in there.

Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-pxa/am300epd.c | 2 +- arch/arm/mach-pxa/balloon3.h | 2 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 2 +- arch/arm/mach-pxa/colibri.h | 2 +- arch/arm/mach-pxa/corgi.h | 2 +- arch/arm/mach-pxa/corgi_pm.c | 2 +- arch/arm/mach-pxa/csb726.c | 2 +- arch/arm/mach-pxa/csb726.h | 2 +- arch/arm/mach-pxa/devices.c | 6 +-- arch/arm/mach-pxa/e740-pcmcia.c | 2 +- .../{include/mach => }/eseries-gpio.h | 0 arch/arm/mach-pxa/eseries.c | 2 +- arch/arm/mach-pxa/generic.c | 8 +-- arch/arm/mach-pxa/gumstix.h | 2 +- arch/arm/mach-pxa/h5000.c | 2 +- arch/arm/mach-pxa/hx4700.h | 2 +- arch/arm/mach-pxa/idp.h | 2 +- arch/arm/mach-pxa/include/mach/pxa-regs.h | 52 ------------------ arch/arm/mach-pxa/irq.c | 2 +- arch/arm/mach-pxa/{include/mach => }/irqs.h | 0 arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-pxa/lubbock.c | 2 +- arch/arm/mach-pxa/lubbock.h | 2 +- arch/arm/mach-pxa/magician.c | 2 +- .../mach-pxa/{include/mach => }/magician.h | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/mainstone.h | 2 +- arch/arm/mach-pxa/mfp-pxa2xx.c | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 2 +- arch/arm/mach-pxa/{include/mach => }/mfp.h | 0 arch/arm/mach-pxa/mioa701.c | 2 +- arch/arm/mach-pxa/palmld.h | 2 +- arch/arm/mach-pxa/palmt5.h | 2 +- arch/arm/mach-pxa/palmtc.h | 2 +- arch/arm/mach-pxa/palmtreo.c | 2 +- arch/arm/mach-pxa/palmtx.h | 2 +- arch/arm/mach-pxa/pcm027.h | 2 +- arch/arm/mach-pxa/pcm990_baseboard.h | 2 +- arch/arm/mach-pxa/poodle.h | 2 +- arch/arm/mach-pxa/pxa-dt.c | 2 +- arch/arm/mach-pxa/pxa-regs.h | 53 ++++++++++++++++++- arch/arm/mach-pxa/pxa25x.c | 6 +-- arch/arm/mach-pxa/pxa25x.h | 4 +- arch/arm/mach-pxa/pxa27x.c | 6 +-- arch/arm/mach-pxa/pxa27x.h | 4 +- .../mach-pxa/{include/mach => }/pxa2xx-regs.h | 0 arch/arm/mach-pxa/pxa2xx.c | 6 +-- .../mach-pxa/{include/mach => }/pxa3xx-regs.h | 0 arch/arm/mach-pxa/pxa3xx.c | 8 +-- arch/arm/mach-pxa/pxa3xx.h | 4 +- .../mach-pxa/{include/mach => }/regs-ost.h | 0 arch/arm/mach-pxa/reset.c | 6 +-- arch/arm/mach-pxa/{include/mach => }/reset.h | 0 arch/arm/mach-pxa/sharpsl_pm.c | 2 +- arch/arm/mach-pxa/sleep.S | 4 +- arch/arm/mach-pxa/smemc.c | 2 +- arch/arm/mach-pxa/{include/mach => }/smemc.h | 0 arch/arm/mach-pxa/spitz.c | 4 +- arch/arm/mach-pxa/spitz.h | 2 +- arch/arm/mach-pxa/standby.S | 2 +- arch/arm/mach-pxa/tosa.c | 6 +-- arch/arm/mach-pxa/{include/mach => }/tosa.h | 0 arch/arm/mach-pxa/trizeps4-pcmcia.c | 2 +- arch/arm/mach-pxa/trizeps4.c | 2 +- arch/arm/mach-pxa/trizeps4.h | 2 +- arch/arm/mach-pxa/xcep.c | 2 +- arch/arm/mach-pxa/z2.c | 2 +- arch/arm/mach-pxa/{include/mach => }/z2.h | 0 arch/arm/mach-pxa/zeus.c | 2 +- arch/arm/mach-pxa/zylonite.c | 2 +- 70 files changed, 133 insertions(+), 134 deletions(-) rename arch/arm/mach-pxa/{include/mach => }/eseries-gpio.h (100%) delete mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/irqs.h (100%) rename arch/arm/mach-pxa/{include/mach => }/magician.h (99%) rename arch/arm/mach-pxa/{include/mach => }/mfp.h (100%) rename arch/arm/mach-pxa/{include/mach => }/pxa2xx-regs.h (100%) rename arch/arm/mach-pxa/{include/mach => }/pxa3xx-regs.h (100%) rename arch/arm/mach-pxa/{include/mach => }/regs-ost.h (100%) rename arch/arm/mach-pxa/{include/mach => }/reset.h (100%) rename arch/arm/mach-pxa/{include/mach => }/smemc.h (100%) rename arch/arm/mach-pxa/{include/mach => }/tosa.h (100%) rename arch/arm/mach-pxa/{include/mach => }/z2.h (100%)

diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index 17d08abeeb17..4b55bc89db8f 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -30,7 +30,7 @@

#include "gumstix.h" #include "mfp-pxa25x.h" -#include <mach/irqs.h> +#include "irqs.h" #include <linux/platform_data/video-pxafb.h>

#include "generic.h" diff --git a/arch/arm/mach-pxa/balloon3.h b/arch/arm/mach-pxa/balloon3.h index f351358c0e5b..04f3639c4082 100644 --- a/arch/arm/mach-pxa/balloon3.h +++ b/arch/arm/mach-pxa/balloon3.h @@ -11,7 +11,7 @@ #ifndef ASM_ARCH_BALLOON3_H #define ASM_ARCH_BALLOON3_H

-#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO */ +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */

enum balloon3_features { BALLOON3_FEATURE_OHCI, diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 701dfef930eb..77d6ef5fa42d 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -17,7 +17,7 @@ #include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> -#include <mach/pxa3xx-regs.h> +#include "pxa3xx-regs.h" #include "mfp-pxa300.h" #include "colibri.h" #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h index 85525d49e321..01a46f36cc1f 100644 --- a/arch/arm/mach-pxa/colibri.h +++ b/arch/arm/mach-pxa/colibri.h @@ -3,7 +3,7 @@ #define _COLIBRI_H_

#include <net/ax88796.h> -#include <mach/mfp.h> +#include "mfp.h"

/* * base board glue for PXA270 module diff --git a/arch/arm/mach-pxa/corgi.h b/arch/arm/mach-pxa/corgi.h index fe2fcf6532b9..b565ca7b8cda 100644 --- a/arch/arm/mach-pxa/corgi.h +++ b/arch/arm/mach-pxa/corgi.h @@ -9,7 +9,7 @@ #ifndef __ASM_ARCH_CORGI_H #define __ASM_ARCH_CORGI_H 1

-#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO */ +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */

/* * Corgi (Non Standard) GPIO Definitions diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index c6ddfc737644..555a5c1afd96 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -21,7 +21,7 @@ #include <asm/mach-types.h>

#include "corgi.h" -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "sharpsl_pm.h"

#include "generic.h" diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 88f2f1d96c7b..410b1af87d55 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -23,7 +23,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/asoc-pxa.h> -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h index 30d7cf926b84..628928743bd5 100644 --- a/arch/arm/mach-pxa/csb726.h +++ b/arch/arm/mach-pxa/csb726.h @@ -7,7 +7,7 @@ #ifndef CSB726_H #define CSB726_H

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

#define CSB726_GPIO_IRQ_LAN 52 #define CSB726_GPIO_IRQ_SM501 53 diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 12f78636045f..a7b92dd1ca9e 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -16,7 +16,7 @@ #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> -#include <mach/irqs.h> +#include "irqs.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/media/camera-pxa.h> @@ -24,8 +24,8 @@ #include <linux/platform_data/mmp_dma.h> #include <linux/platform_data/mtd-nand-pxa3xx.h>

-#include <mach/regs-ost.h> -#include <mach/reset.h> +#include "regs-ost.h" +#include "reset.h" #include "devices.h" #include "generic.h"

diff --git a/arch/arm/mach-pxa/e740-pcmcia.c b/arch/arm/mach-pxa/e740-pcmcia.c index 133535d7ac05..11a2c5d42920 100644 --- a/arch/arm/mach-pxa/e740-pcmcia.c +++ b/arch/arm/mach-pxa/e740-pcmcia.c @@ -13,7 +13,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h>

-#include <mach/eseries-gpio.h> +#include "eseries-gpio.h"

#include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/eseries-gpio.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/eseries-gpio.h rename to arch/arm/mach-pxa/eseries-gpio.h diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 2643a2a72408..c441a299b1ac 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -33,7 +33,7 @@ #include <asm/mach-types.h>

#include "pxa25x.h" -#include <mach/eseries-gpio.h> +#include "eseries-gpio.h" #include "eseries-irq.h" #include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 91ea063dc54d..02fdde7e3e34 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -25,10 +25,10 @@ #include <asm/mach-types.h>

#include "addr-map.h" -#include <mach/irqs.h> -#include <mach/reset.h> -#include <mach/smemc.h> -#include <mach/pxa3xx-regs.h> +#include "irqs.h" +#include "reset.h" +#include "smemc.h" +#include "pxa3xx-regs.h"

#include "generic.h" #include <clocksource/pxa.h> diff --git a/arch/arm/mach-pxa/gumstix.h b/arch/arm/mach-pxa/gumstix.h index 470250cdee16..9005b3c0aabd 100644 --- a/arch/arm/mach-pxa/gumstix.h +++ b/arch/arm/mach-pxa/gumstix.h @@ -3,7 +3,7 @@ * arch/arm/mach-pxa/include/mach/gumstix.h */

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/* BTRESET - Reset line to Bluetooth module, active low signal. */ #define GPIO_GUMSTIX_BTRESET 7 diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index ece1e71c90a9..212efe24aedb 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -29,7 +29,7 @@ #include "pxa25x.h" #include "h5000.h" #include "udc.h" -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h"

diff --git a/arch/arm/mach-pxa/hx4700.h b/arch/arm/mach-pxa/hx4700.h index ce2db33989e1..0c30e6d9c660 100644 --- a/arch/arm/mach-pxa/hx4700.h +++ b/arch/arm/mach-pxa/hx4700.h @@ -10,7 +10,7 @@

#include <linux/gpio.h> #include <linux/mfd/asic3.h> -#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO */ +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */

#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h index a89e6723b1a1..81b9bd9ba754 100644 --- a/arch/arm/mach-pxa/idp.h +++ b/arch/arm/mach-pxa/idp.h @@ -20,7 +20,7 @@ * IDP hardware. */

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

#define IDP_FLASH_PHYS (PXA_CS0_PHYS) #define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h deleted file mode 100644 index ba5120c06b8a..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - */ -#ifndef __ASM_MACH_PXA_REGS_H -#define __ASM_MACH_PXA_REGS_H - -/* - * Workarounds for at least 2 errata so far require this. - * The mapping is set in mach-pxa/generic.c. - */ -#define UNCACHED_PHYS_0 0xfe000000 -#define UNCACHED_PHYS_0_SIZE 0x00100000 - -/* - * Intel PXA2xx internal register mapping: - * - * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff - * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff - * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff - * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff - * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff - * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff - * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff - * - * Note that not all PXA2xx chips implement all those addresses, and the - * kernel only maps the minimum needed range of this mapping. - */ -#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) -#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) - -/* With indexed regs we don't want to feed the index through io_p2v() - especially if it is a variable, otherwise horrible code will result. */ -# define __REG2(x,y) \ - (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#else - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#endif - - -#endif diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index f25c30e8a834..96f33ef1d9ea 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -21,7 +21,7 @@

#include <asm/exception.h>

-#include <mach/irqs.h> +#include "irqs.h"

#include "generic.h" #include "pxa-regs.h" diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/irqs.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/irqs.h rename to arch/arm/mach-pxa/irqs.h diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index e03436710752..0e4123c5fd42 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -44,7 +44,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 201f89f49642..4f0944f3b262 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -52,7 +52,7 @@ #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include "pm.h" -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/lubbock.h b/arch/arm/mach-pxa/lubbock.h index 8e3ff7d57121..55cf91e22ae2 100644 --- a/arch/arm/mach-pxa/lubbock.h +++ b/arch/arm/mach-pxa/lubbock.h @@ -5,7 +5,7 @@ * Copyright: MontaVista Software Inc. */

-#include <mach/irqs.h> +#include "irqs.h"

#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 598c977a8ae6..20456a55c4c5 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -35,7 +35,7 @@

#include "pxa27x.h" #include "addr-map.h" -#include <mach/magician.h> +#include "magician.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/magician.h similarity index 99% rename from arch/arm/mach-pxa/include/mach/magician.h rename to arch/arm/mach-pxa/magician.h index 7d3af561af6f..e1e4f9f6b22b 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/magician.h @@ -9,7 +9,7 @@ #define _MAGICIAN_H_

#include <linux/gpio.h> -#include <mach/irqs.h> +#include "irqs.h"

/* * PXA GPIOs diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 599736c93163..fd386f1c414c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -52,7 +52,7 @@ #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include "addr-map.h" -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/mainstone.h b/arch/arm/mach-pxa/mainstone.h index ba003742e003..f116c56cf5d9 100644 --- a/arch/arm/mach-pxa/mainstone.h +++ b/arch/arm/mach-pxa/mainstone.h @@ -8,7 +8,7 @@ #ifndef ASM_ARCH_MAINSTONE_H #define ASM_ARCH_MAINSTONE_H

-#include <mach/irqs.h> +#include "irqs.h"

#define MST_ETH_PHYS PXA_CS4_PHYS

diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 6bc7206fd2ac..57b0782880de 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -18,7 +18,7 @@ #include <linux/syscore_ops.h> #include <linux/soc/pxa/cpu.h>

-#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "mfp-pxa2xx.h"

#include "generic.h" diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index f26b5e5412cf..d16ab7451efe 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -17,7 +17,7 @@ #include <linux/syscore_ops.h>

#include "mfp-pxa3xx.h" -#include <mach/pxa3xx-regs.h> +#include "pxa3xx-regs.h"

#ifdef CONFIG_PM /* diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/mfp.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/mfp.h rename to arch/arm/mach-pxa/mfp.h diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 907cd7b5f58c..d08f962ffb04 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -42,7 +42,7 @@ #include "pxa27x-udc.h" #include <linux/platform_data/media/camera-pxa.h> #include <linux/platform_data/asoc-pxa.h> -#include <mach/smemc.h> +#include "smemc.h"

#include "mioa701.h"

diff --git a/arch/arm/mach-pxa/palmld.h b/arch/arm/mach-pxa/palmld.h index ee3bc15b71a2..99a6d8b3a1e3 100644 --- a/arch/arm/mach-pxa/palmld.h +++ b/arch/arm/mach-pxa/palmld.h @@ -9,7 +9,7 @@ #ifndef _INCLUDE_PALMLD_H_ #define _INCLUDE_PALMLD_H_

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/** HERE ARE GPIOs **/

diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h index 1fb1da7c8da3..cf84aedca717 100644 --- a/arch/arm/mach-pxa/palmt5.h +++ b/arch/arm/mach-pxa/palmt5.h @@ -11,7 +11,7 @@ #ifndef _INCLUDE_PALMT5_H_ #define _INCLUDE_PALMT5_H_

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/** HERE ARE GPIOs **/

diff --git a/arch/arm/mach-pxa/palmtc.h b/arch/arm/mach-pxa/palmtc.h index afec057c2857..9257a02c46e5 100644 --- a/arch/arm/mach-pxa/palmtc.h +++ b/arch/arm/mach-pxa/palmtc.h @@ -12,7 +12,7 @@ #ifndef _INCLUDE_PALMTC_H_ #define _INCLUDE_PALMTC_H_

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/** HERE ARE GPIOs **/

diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index d6d5b90d9578..238a31f32cba 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -37,7 +37,7 @@ #include <linux/platform_data/keypad-pxa27x.h> #include "udc.h" #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include <linux/platform_data/asoc-palm27x.h> #include <linux/platform_data/media/camera-pxa.h> #include "palm27x.h" diff --git a/arch/arm/mach-pxa/palmtx.h b/arch/arm/mach-pxa/palmtx.h index a2bb993952d9..ec88abf0fc6c 100644 --- a/arch/arm/mach-pxa/palmtx.h +++ b/arch/arm/mach-pxa/palmtx.h @@ -12,7 +12,7 @@ #ifndef _INCLUDE_PALMTX_H_ #define _INCLUDE_PALMTX_H_

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/** HERE ARE GPIOs **/

diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h index 0c4ab636ce4e..58ade4ad6ba3 100644 --- a/arch/arm/mach-pxa/pcm027.h +++ b/arch/arm/mach-pxa/pcm027.h @@ -10,7 +10,7 @@ * Definitions of CPU card resources only */

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/* phyCORE-PXA270 (PCM027) Interrupts */ #define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h index 5be11d1b7019..18cf71decb03 100644 --- a/arch/arm/mach-pxa/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/pcm990_baseboard.h @@ -7,7 +7,7 @@ */

#include "pcm027.h" -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/* * definitions relevant only when the PCM-990 diff --git a/arch/arm/mach-pxa/poodle.h b/arch/arm/mach-pxa/poodle.h index e675a3d1aa18..00798b44f204 100644 --- a/arch/arm/mach-pxa/poodle.h +++ b/arch/arm/mach-pxa/poodle.h @@ -15,7 +15,7 @@ #ifndef __ASM_ARCH_POODLE_H #define __ASM_ARCH_POODLE_H 1

-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/* * GPIOs diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index d32d5c8e966f..5e5d543fdf46 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -11,7 +11,7 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/irqs.h> +#include "irqs.h"

#include "generic.h"

diff --git a/arch/arm/mach-pxa/pxa-regs.h b/arch/arm/mach-pxa/pxa-regs.h index 584d2ac592cc..ba5120c06b8a 100644 --- a/arch/arm/mach-pxa/pxa-regs.h +++ b/arch/arm/mach-pxa/pxa-regs.h @@ -1 +1,52 @@ -#include <mach/pxa-regs.h> +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + */ +#ifndef __ASM_MACH_PXA_REGS_H +#define __ASM_MACH_PXA_REGS_H + +/* + * Workarounds for at least 2 errata so far require this. + * The mapping is set in mach-pxa/generic.c. + */ +#define UNCACHED_PHYS_0 0xfe000000 +#define UNCACHED_PHYS_0_SIZE 0x00100000 + +/* + * Intel PXA2xx internal register mapping: + * + * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff + * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff + * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff + * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff + * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff + * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff + * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff + * + * Note that not all PXA2xx chips implement all those addresses, and the + * kernel only maps the minimum needed range of this mapping. + */ +#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) +#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) + +#ifndef __ASSEMBLY__ +# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) + +/* With indexed regs we don't want to feed the index through io_p2v() + especially if it is a variable, otherwise horrible code will result. */ +# define __REG2(x,y) \ + (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) + +# define __PREG(x) (io_v2p((u32)&(x))) + +#else + +# define __REG(x) io_p2v(x) +# define __PREG(x) io_v2p(x) + +#endif + + +#endif diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 8d21c7eef1d2..6b34d7c169ea 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -30,12 +30,12 @@

#include <asm/mach/map.h> #include <asm/suspend.h> -#include <mach/irqs.h> +#include "irqs.h" #include "pxa25x.h" -#include <mach/reset.h> +#include "reset.h" #include "pm.h" #include "addr-map.h" -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h index 4699ebf7b486..eaaa87666324 100644 --- a/arch/arm/mach-pxa/pxa25x.h +++ b/arch/arm/mach-pxa/pxa25x.h @@ -3,8 +3,8 @@ #define __MACH_PXA25x_H

#include "addr-map.h" -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "mfp-pxa25x.h" -#include <mach/irqs.h> +#include "irqs.h"

#endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c36a9784fab8..afbf6ace954f 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -28,13 +28,13 @@ #include <asm/mach/map.h> #include <asm/irq.h> #include <asm/suspend.h> -#include <mach/irqs.h> +#include "irqs.h" #include "pxa27x.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" #include "addr-map.h" -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h index bf2755561fe5..ede96f3f7214 100644 --- a/arch/arm/mach-pxa/pxa27x.h +++ b/arch/arm/mach-pxa/pxa27x.h @@ -4,9 +4,9 @@

#include <linux/suspend.h> #include "addr-map.h" -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "mfp-pxa27x.h" -#include <mach/irqs.h> +#include "irqs.h"

#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */

diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/pxa2xx-regs.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/pxa2xx-regs.h rename to arch/arm/mach-pxa/pxa2xx-regs.h diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index f583759ac00d..84712a688e5c 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -12,10 +12,10 @@ #include <linux/device.h> #include <linux/io.h>

-#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "mfp-pxa25x.h" -#include <mach/reset.h> -#include <mach/smemc.h> +#include "reset.h" +#include "smemc.h" #include <linux/platform_data/irda-pxaficp.h>

void pxa2xx_clear_reset_status(unsigned int mask) diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/pxa3xx-regs.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/pxa3xx-regs.h rename to arch/arm/mach-pxa/pxa3xx-regs.h diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index d486efb79dcd..979642aa7ffe 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -29,13 +29,13 @@

#include <asm/mach/map.h> #include <asm/suspend.h> -#include <mach/pxa3xx-regs.h> -#include <mach/reset.h> +#include "pxa3xx-regs.h" +#include "reset.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" #include "addr-map.h" -#include <mach/smemc.h> -#include <mach/irqs.h> +#include "smemc.h" +#include "irqs.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h index 6b424d328680..81825f7ad258 100644 --- a/arch/arm/mach-pxa/pxa3xx.h +++ b/arch/arm/mach-pxa/pxa3xx.h @@ -3,7 +3,7 @@ #define __MACH_PXA3XX_H

#include "addr-map.h" -#include <mach/pxa3xx-regs.h> -#include <mach/irqs.h> +#include "pxa3xx-regs.h" +#include "irqs.h"

#endif /* __MACH_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/regs-ost.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/regs-ost.h rename to arch/arm/mach-pxa/regs-ost.h diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index fcb791c5ae3e..f0be90573ad3 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -7,9 +7,9 @@ #include <asm/proc-fns.h> #include <asm/system_misc.h>

-#include <mach/regs-ost.h> -#include <mach/reset.h> -#include <mach/smemc.h> +#include "regs-ost.h" +#include "reset.h" +#include "smemc.h"

static void do_hw_reset(void);

diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/reset.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/reset.h rename to arch/arm/mach-pxa/reset.h diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 83cfbb882a2d..a829baf8d922 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -24,7 +24,7 @@

#include <asm/mach-types.h> #include "pm.h" -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "regs-rtc.h" #include "sharpsl_pm.h"

diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index ab50fe2cf923..d58cf52e3848 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -13,8 +13,8 @@

#include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/smemc.h> -#include <mach/pxa2xx-regs.h> +#include "smemc.h" +#include "pxa2xx-regs.h"

#define MDREFR_KDIV 0x200a4000 // all banks #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index da0eeafdb5a0..3ea8daf1a7f1 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -10,7 +10,7 @@ #include <linux/syscore_ops.h> #include <linux/soc/pxa/cpu.h>

-#include <mach/smemc.h> +#include "smemc.h"

#ifdef CONFIG_PM static unsigned long msc[2]; diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/smemc.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/smemc.h rename to arch/arm/mach-pxa/smemc.h diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cd8f00945373..dd88953adc9d 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -39,14 +39,14 @@

#include "pxa27x.h" #include "pxa27x-udc.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> #include "spitz.h" #include "sharpsl_pm.h" -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/spitz.h b/arch/arm/mach-pxa/spitz.h index f97e3ebd762d..04828d8918aa 100644 --- a/arch/arm/mach-pxa/spitz.h +++ b/arch/arm/mach-pxa/spitz.h @@ -11,7 +11,7 @@ #define __ASM_ARCH_SPITZ_H 1 #endif

-#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */ #include <linux/fb.h>

/* Spitz/Akita GPIOs */ diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 626fecdefb1c..938310b708a0 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -12,7 +12,7 @@ #include <linux/linkage.h> #include <asm/assembler.h>

-#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h"

.text

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 19fe79518aaf..62626cc2a2c5 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -40,16 +40,16 @@ #include <asm/mach-types.h>

#include "pxa25x.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" #include "tosa_bt.h" #include <linux/platform_data/asoc-pxa.h> -#include <mach/smemc.h> +#include "smemc.h"

#include <asm/mach/arch.h> -#include <mach/tosa.h> +#include "tosa.h"

#include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/tosa.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/tosa.h rename to arch/arm/mach-pxa/tosa.h diff --git a/arch/arm/mach-pxa/trizeps4-pcmcia.c b/arch/arm/mach-pxa/trizeps4-pcmcia.c index 02d7bb0c538f..25e363770565 100644 --- a/arch/arm/mach-pxa/trizeps4-pcmcia.c +++ b/arch/arm/mach-pxa/trizeps4-pcmcia.c @@ -19,7 +19,7 @@ #include <asm/mach-types.h> #include <asm/irq.h>

-#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "trizeps4.h"

#include <pcmcia/soc_common.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index fadfbb40cd6c..716cce885379 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -46,7 +46,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/trizeps4.h b/arch/arm/mach-pxa/trizeps4.h index e0f37c0ff06f..b6c19d155ef9 100644 --- a/arch/arm/mach-pxa/trizeps4.h +++ b/arch/arm/mach-pxa/trizeps4.h @@ -12,7 +12,7 @@ #define _TRIPEPS4_H_

#include "addr-map.h" -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */

/* physical memory regions */ #define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 7389e0199144..6bb02b65fb82 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -26,7 +26,7 @@

#include "pxa25x.h" #include "addr-map.h" -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index bb854e903c8f..d03520555497 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -34,7 +34,7 @@

#include "pxa27x.h" #include "mfp-pxa27x.h" -#include <mach/z2.h> +#include "z2.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/keypad-pxa27x.h> diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/z2.h similarity index 100% rename from arch/arm/mach-pxa/include/mach/z2.h rename to arch/arm/mach-pxa/z2.h diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 2e6c8d156d77..1fdef9426784 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -49,7 +49,7 @@ #include <linux/platform_data/asoc-pxa.h> #include "viper-pcmcia.h" #include "zeus.h" -#include <mach/smemc.h> +#include "smemc.h"

#include "generic.h"

diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index ba6dc86da855..8ed75ac29b1a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -32,7 +32,7 @@ #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> -#include <mach/mfp.h> +#include "mfp.h"

#include "devices.h" #include "generic.h"

From: Arnd Bergmann arnd@arndb.de

PXA is now ready to be built into a single kernel with all the other ARMv5 platforms, so change the Kconfig bit to finish it off. The mach/uncompress.h support is the last bit that goes away, getting replaced with the normal DEBUG_LL based approach.

Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/Kconfig | 17 ----- arch/arm/configs/am200epdkit_defconfig | 1 + arch/arm/configs/cm_x300_defconfig | 1 + arch/arm/configs/colibri_pxa270_defconfig | 1 + arch/arm/configs/colibri_pxa300_defconfig | 1 + arch/arm/configs/corgi_defconfig | 1 + arch/arm/configs/eseries_pxa_defconfig | 1 + arch/arm/configs/ezx_defconfig | 1 + arch/arm/configs/h5000_defconfig | 1 + arch/arm/configs/imote2_defconfig | 1 + arch/arm/configs/lpd270_defconfig | 1 + arch/arm/configs/lubbock_defconfig | 1 + arch/arm/configs/magician_defconfig | 1 + arch/arm/configs/mainstone_defconfig | 1 + arch/arm/configs/palmz72_defconfig | 1 + arch/arm/configs/pcm027_defconfig | 1 + arch/arm/configs/pxa255-idp_defconfig | 1 + arch/arm/configs/pxa3xx_defconfig | 1 + arch/arm/configs/pxa_defconfig | 1 + arch/arm/configs/spitz_defconfig | 1 + arch/arm/configs/trizeps4_defconfig | 1 + arch/arm/configs/viper_defconfig | 1 + arch/arm/configs/xcep_defconfig | 1 + arch/arm/configs/zeus_defconfig | 1 + arch/arm/mach-pxa/Kconfig | 14 +++++ arch/arm/mach-pxa/Makefile.boot | 3 - arch/arm/mach-pxa/include/mach/uncompress.h | 70 --------------------- 27 files changed, 37 insertions(+), 90 deletions(-) delete mode 100644 arch/arm/mach-pxa/Makefile.boot delete mode 100644 arch/arm/mach-pxa/include/mach/uncompress.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ace6c08c8ae2..001f77e0058c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -411,23 +411,6 @@ config ARCH_DOVE help Support for the Marvell Dove SoC 88AP510

-config ARCH_PXA - bool "PXA2xx/PXA3xx-based" - select ARM_CPU_SUSPEND if PM - select AUTO_ZRELADDR - select COMMON_CLK - select CLKSRC_PXA - select CLKSRC_MMIO - select TIMER_OF - select CPU_XSCALE if !CPU_XSC3 - select GPIO_PXA - select GPIOLIB - select IRQ_DOMAIN - select PLAT_PXA - select SPARSE_IRQ - help - Support for Intel/Marvell's PXA2xx/PXA3xx processor line. - config ARCH_RPC bool "RiscPC" depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000 diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index 4e49d6cb2f62..9252ce0e722b 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -10,6 +10,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_GUMSTIX=y CONFIG_PCCARD=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 45769d0ddd4e..bb0fcd82d2a7 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -10,6 +10,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_GPIO_PCA953X=y CONFIG_MACH_CM_X300=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 52bad9a544a0..b29898fd6a12 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -16,6 +16,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_COLIBRI=y CONFIG_PREEMPT=y diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index 26e5a67f8e2d..f9d110294644 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -1,6 +1,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_COLIBRI300=y CONFIG_AEABI=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 15b749f6996d..96c677c98bc7 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -9,6 +9,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_POODLE=y diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index 046f4dc2e18e..2146adc1825e 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -9,6 +9,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_ESERIES=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 0788a892e160..5d000c8be44e 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -14,6 +14,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_EZX=y CONFIG_NO_HZ=y diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig index f5a338fefda8..a67d6020aee5 100644 --- a/arch/arm/configs/h5000_defconfig +++ b/arch/arm/configs/h5000_defconfig @@ -10,6 +10,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_H5000=y CONFIG_AEABI=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 015b7ef237de..c056fe29d300 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -13,6 +13,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_INTELMOTE2=y CONFIG_NO_HZ=y diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index 3a4d0e64cd6e..5c0a671ed294 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SLAB=y CONFIG_MODULES=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_LOGICPD_PXA270=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index 4ce2da2e76fa..cf49dc1629a7 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_LUBBOCK=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index abde1fb23b20..13da808ffa13 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -9,6 +9,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_H4700=y CONFIG_MACH_MAGICIAN=y diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index 26499b697f9f..03b4c61bdadd 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_MAINSTONE=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index b47c8abe85bc..e6acb1d588e2 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -7,6 +7,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_PALM=y # CONFIG_MACH_PALMTX is not set diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index e97a158081fc..106d5bef48e2 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -13,6 +13,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_PCM027=y CONFIG_MACH_PCM990_BASEBOARD=y diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index 4a383afa5e87..5663245e9534 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_IDP=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index f0c34017f2aa..228d4271748b 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -6,6 +6,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_SLAB=y CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_LITTLETON=y CONFIG_MACH_TAVOREVB=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 29b1f192afbb..1db70dfd32d2 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -23,6 +23,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_PARTITION_ADVANCED=y CONFIG_LDM_PARTITION=y CONFIG_CMDLINE_PARTITION=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_LUBBOCK=y CONFIG_MACH_MAINSTONE=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index f42c7a502b6e..43d079ee342a 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -9,6 +9,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_AKITA=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index d66f0c287d41..baeba4667e9b 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -14,6 +14,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_TRIZEPS_PXA=y CONFIG_MACH_TRIZEPS4=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index c28539bfd128..7c1029716ea5 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -9,6 +9,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_VIPER=y CONFIG_IWMMXT=y diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 4d8e7f2eaef7..3752672f980e 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -19,6 +19,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLOCK is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_XCEP=y CONFIG_IWMMXT=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 25bb6995f105..03a12fb51259 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -4,6 +4,7 @@ CONFIG_LOG_BUF_SHIFT=13 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_ARCOM_ZEUS=y CONFIG_PCCARD=m diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 57f0be4065c1..d2cea239fe13 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -1,4 +1,18 @@ # SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_PXA + bool "PXA2xx/PXA3xx-based" + depends on ARCH_MULTI_V5 + select ARM_CPU_SUSPEND if PM + select CLKSRC_PXA + select CLKSRC_MMIO + select TIMER_OF + select CPU_XSCALE if !CPU_XSC3 + select GPIO_PXA + select GPIOLIB + select PLAT_PXA + help + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. + if ARCH_PXA

menu "Intel PXA2xx/PXA3xx Implementations" diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot deleted file mode 100644 index bb6e353ecf06..000000000000 --- a/arch/arm/mach-pxa/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0xa0008000 - diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h deleted file mode 100644 index 1ed629e38ce6..000000000000 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ /dev/null @@ -1,70 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-pxa/include/mach/uncompress.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - */ - -#include <linux/serial_reg.h> -#include <asm/mach-types.h> - -#define FFUART_BASE (0x40100000) -#define BTUART_BASE (0x40200000) -#define STUART_BASE (0x40700000) - -unsigned long uart_base; -unsigned int uart_shift; -unsigned int uart_is_pxa; - -static inline unsigned char uart_read(int offset) -{ - return *(volatile unsigned char *)(uart_base + (offset << uart_shift)); -} - -static inline void uart_write(unsigned char val, int offset) -{ - *(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val; -} - -static inline int uart_is_enabled(void) -{ - /* assume enabled by default for non-PXA uarts */ - return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1; -} - -static inline void putc(char c) -{ - if (!uart_is_enabled()) - return; - - while (!(uart_read(UART_LSR) & UART_LSR_THRE)) - barrier(); - - uart_write(c, UART_TX); -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ - /* initialize to default */ - uart_base = FFUART_BASE; - uart_shift = 2; - uart_is_pxa = 1; - - if (machine_is_littleton() || machine_is_csb726() || - machine_is_cm_x300() || machine_is_balloon3()) - uart_base = STUART_BASE; - - if (machine_is_arcom_zeus()) { - uart_base = 0x10000000; /* nCS4 */ - uart_shift = 1; - uart_is_pxa = 0; - } -}