[alsa-devel] [PATCH] ASoC: nau8825: fix fake interruption when booting
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen.
The patch help to fix the issue as follows: Google issue 133904101: Cave: excessive number of interrupts before Nau8825 codec is initialized Reported Issue Chrome OS Version : ChromeOS R76-12217.0.0 Type of hardware :
What steps will reproduce the problem? Boot device What is the expected output? A lot of interrupts without any events What do you see instead? The fake interrupts are gone
How frequently does this problem reproduce? Always
What is the impact to the user, and is there a workaround? If so, what is it?
BUG=b:133904101 TEST=Boot device, and then check the interrupts are real.
Signed-off-by: John Hsu KCHSU0@nuvoton.com --- sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf99879..83ec841f7865 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
+ /* Pull up IRQ pin */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);
diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c618569..3f41897ed3f6 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */
/* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10) #define NAU8825_IRQ_RMS_EN (1 << 8)
On Mon, Jun 10, 2019 at 10:13 AM John Hsu KCHSU0@nuvoton.com wrote:
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen.
The patch help to fix the issue as follows: Google issue 133904101: Cave: excessive number of interrupts before Nau8825 codec is initialized Reported Issue Chrome OS Version : ChromeOS R76-12217.0.0 Type of hardware :
What steps will reproduce the problem? Boot device What is the expected output? A lot of interrupts without any events What do you see instead? The fake interrupts are gone
How frequently does this problem reproduce? Always
What is the impact to the user, and is there a workaround? If so, what is it?
BUG=b:133904101 TEST=Boot device, and then check the interrupts are real.
Signed-off-by: John Hsu KCHSU0@nuvoton.com
Tested-by: Cheng-Yi Chiang cychiang@chromium.org
Thank you for the fix. I think you can remove the description about issue 133904101 in the commit messages and BUG and TEST fields.
sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf99879..83ec841f7865 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
/* Pull up IRQ pin */regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN,NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c618569..3f41897ed3f6 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */
/* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10)
#define NAU8825_IRQ_RMS_EN (1 << 8)
2.21.0
On 6/10/2019 10:18 AM, Cheng-yi Chiang wrote:
On Mon, Jun 10, 2019 at 10:13 AM John Hsu KCHSU0@nuvoton.com wrote:
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen.
The patch help to fix the issue as follows: Google issue 133904101: Cave: excessive number of interrupts before Nau8825 codec is initialized Reported Issue Chrome OS Version : ChromeOS R76-12217.0.0 Type of hardware :
What steps will reproduce the problem? Boot device What is the expected output? A lot of interrupts without any events What do you see instead? The fake interrupts are gone
How frequently does this problem reproduce? Always
What is the impact to the user, and is there a workaround? If so, what is it?
BUG=b:133904101 TEST=Boot device, and then check the interrupts are real.
Signed-off-by: John Hsu KCHSU0@nuvoton.com
Tested-by: Cheng-Yi Chiang cychiang@chromium.org
Thank you for the fix. I think you can remove the description about issue 133904101 in the commit messages and BUG and TEST fields.
OK, I will remove it later.
sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf99879..83ec841f7865 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
/* Pull up IRQ pin */regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN,NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c618569..3f41897ed3f6 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */
/* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10)
#define NAU8825_IRQ_RMS_EN (1 << 8)
2.21.0
=========================================================================================== The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen.
What steps will reproduce the problem? Boot device What is the expected output? A lot of interrupts without any events What do you see instead? The fake interrupts are gone How frequently does this problem reproduce? Always
Signed-off-by: John Hsu KCHSU0@nuvoton.com --- sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf99879..83ec841f7865 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
+ /* Pull up IRQ pin */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);
diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c618569..3f41897ed3f6 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */
/* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10) #define NAU8825_IRQ_RMS_EN (1 << 8)
On Mon, Jun 10, 2019 at 10:40 AM John Hsu KCHSU0@nuvoton.com wrote:
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen.
What steps will reproduce the problem? Boot device What is the expected output? A lot of interrupts without any events What do you see instead? The fake interrupts are gone How frequently does this problem reproduce? Always
I guess you don't need these descriptions.
Signed-off-by: John Hsu KCHSU0@nuvoton.com
Please add my Tested-by. Thanks!
sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf99879..83ec841f7865 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
/* Pull up IRQ pin */regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN,NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c618569..3f41897ed3f6 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */
/* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10)
#define NAU8825_IRQ_RMS_EN (1 << 8)
2.21.0
On 6/10/2019 10:56 AM, Cheng-yi Chiang wrote:
On Mon, Jun 10, 2019 at 10:40 AM John Hsu KCHSU0@nuvoton.com wrote:
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen.
What steps will reproduce the problem? Boot device What is the expected output? A lot of interrupts without any events What do you see instead? The fake interrupts are gone How frequently does this problem reproduce? Always
I guess you don't need these descriptions.
Yes, I add it by referring to the comment of ChromeOS.
I can remove it.
Signed-off-by: John Hsu KCHSU0@nuvoton.com
Please add my Tested-by. Thanks!
OK, I will add it.
sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf99879..83ec841f7865 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
/* Pull up IRQ pin */regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN,NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c618569..3f41897ed3f6 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */
/* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10)
#define NAU8825_IRQ_RMS_EN (1 << 8)
2.21.0
=========================================================================================== The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen.
Signed-off-by: John Hsu KCHSU0@nuvoton.com Tested-by: Cheng-Yi Chiang cychiang@chromium.org --- sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf99879..83ec841f7865 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
+ /* Pull up IRQ pin */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);
diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c618569..3f41897ed3f6 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */
/* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10) #define NAU8825_IRQ_RMS_EN (1 << 8)
On Mon, Jun 10, 2019 at 11:40:40AM +0800, John Hsu wrote:
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low
On some specific system?
Please don't send new patches in the middle of old threads, it makes it hard to spot them and work out what the current version is.
On 6/13/2019 7:20 PM, Mark Brown wrote:
On Mon, Jun 10, 2019 at 11:40:40AM +0800, John Hsu wrote:
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low
On some specific system?
No, not really. The ISR is made for active low. The setup decreases the risk of system damage, in case the hardware has no pull-up resistor.
Please don't send new patches in the middle of old threads, it makes it hard to spot them and work out what the current version is.
I understand. Thanks for reminding. Sorry for a little pushy.
=========================================================================================== The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.
The patch
ASoC: nau8825: fix fake interruption when booting
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.2
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From cbb9f8ccc8232b4647c4180af653eee744818221 Mon Sep 17 00:00:00 2001
From: John Hsu KCHSU0@nuvoton.com Date: Mon, 10 Jun 2019 11:40:40 +0800 Subject: [PATCH] ASoC: nau8825: fix fake interruption when booting
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen.
Signed-off-by: John Hsu KCHSU0@nuvoton.com Tested-by: Cheng-Yi Chiang cychiang@chromium.org Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf99879..83ec841f7865 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
+ /* Pull up IRQ pin */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);
diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c618569..3f41897ed3f6 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */
/* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10) #define NAU8825_IRQ_RMS_EN (1 << 8)
participants (4)
-
AS50 KCHsu0 -
Cheng-yi Chiang -
John Hsu
-
Mark Brown