[alsa-devel] [PATCH v2] ASoC: cros_ec_codec: Support setting bclk ratio
Support setting bclk ratio from machine drivers.
Signed-off-by: Yu-Hsuan Hsu yuhsuan@chromium.org --- sound/soc/codecs/cros_ec_codec.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c index 6a24f570c5e86f..d3dc42aa682565 100644 --- a/sound/soc/codecs/cros_ec_codec.c +++ b/sound/soc/codecs/cros_ec_codec.c @@ -45,6 +45,9 @@ struct cros_ec_codec_priv { /* DMIC */ atomic_t dmic_probed;
+ /* I2S_RX */ + uint32_t i2s_rx_bclk_ratio; + /* WoV */ bool wov_enabled; uint8_t *wov_audio_shm_p; @@ -259,6 +262,7 @@ static int i2s_rx_hw_params(struct snd_pcm_substream *substream, snd_soc_component_get_drvdata(component); struct ec_param_ec_codec_i2s_rx p; enum ec_codec_i2s_rx_sample_depth depth; + uint32_t bclk; int ret;
if (params_rate(params) != 48000) @@ -284,15 +288,29 @@ static int i2s_rx_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret;
- dev_dbg(component->dev, "set bclk to %u\n", - snd_soc_params_to_bclk(params)); + if (priv->i2s_rx_bclk_ratio) + bclk = params_rate(params) * priv->i2s_rx_bclk_ratio; + else + bclk = snd_soc_params_to_bclk(params); + + dev_dbg(component->dev, "set bclk to %u\n", bclk);
p.cmd = EC_CODEC_I2S_RX_SET_BCLK; - p.set_bclk_param.bclk = snd_soc_params_to_bclk(params); + p.set_bclk_param.bclk = bclk; return send_ec_host_command(priv->ec_device, EC_CMD_EC_CODEC_I2S_RX, (uint8_t *)&p, sizeof(p), NULL, 0); }
+static int i2s_rx_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio) +{ + struct snd_soc_component *component = dai->component; + struct cros_ec_codec_priv *priv = + snd_soc_component_get_drvdata(component); + + priv->i2s_rx_bclk_ratio = ratio; + return 0; +} + static int i2s_rx_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { struct snd_soc_component *component = dai->component; @@ -340,6 +358,7 @@ static int i2s_rx_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) static const struct snd_soc_dai_ops i2s_rx_dai_ops = { .hw_params = i2s_rx_hw_params, .set_fmt = i2s_rx_set_fmt, + .set_bclk_ratio = i2s_rx_set_bclk_ratio, };
static int i2s_rx_event(struct snd_soc_dapm_widget *w,
On Sun, Jan 26, 2020 at 12:29 AM Yu-Hsuan Hsu yuhsuan@chromium.org wrote:
Support setting bclk ratio from machine drivers.
Signed-off-by: Yu-Hsuan Hsu yuhsuan@chromium.org
Reviewed-by: Tzung-Bi Shih tzungbi@google.com
participants (2)
-
Tzung-Bi Shih
-
Yu-Hsuan Hsu