Hi Daniel,

On 03/27/2014 11:49 AM, Daniel Mack wrote:

In DIT (S/PDIF) mode, program the transmitted user bits to reflect the configured sample rate, along with some other details.

Signed-off-by: Daniel Mack zonque@gmail.com

Thanks to Peter for the review and bearing with my confusion :)

sound/soc/davinci/davinci-mcasp.c | 49 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 47 insertions(+), 2 deletions(-)

diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 375e197..1fbded0 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -27,6 +27,7 @@ #include <linux/of_platform.h> #include <linux/of_device.h>

+#include <sound/asoundef.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -576,8 +577,12 @@ static int mcasp_i2s_hw_param(struct davinci_mcasp *mcasp, int stream) }

/* S/PDIF */ -static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp) +static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp,

• 	      unsigned int rate)
  

{

• u32 val = 0;
• u8 *bytes = (u8*) &val;

Would it be better to call these variables as: u32 cs; /* as in Channel Status */ u8 *cs_bytes = (u8*) &cs; /* Channel Status in bytes */

Without the comments of course. Sorry, I did not noticed this previously...

Otherwise it looks good, does it work? ;)

Regards, Péter

• /* Set the TX format : 24 bit right rotation, 32 bit slot, Pad 0 and LSB first */ mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, TXROT(6) | TXSSZ(15));

@@ -599,6 +604,46 @@ static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp) /* Enable the DIT */ mcasp_set_bits(mcasp, DAVINCI_MCASP_TXDITCTL_REG, DITEN);

• /* Set S/PDIF channel status bits */
• bytes[0] = IEC958_AES0_CON_NOT_COPYRIGHT;
• bytes[1] = IEC958_AES1_CON_PCM_CODER;
• switch (rate) {
• case 22050:

• bytes[3] |= IEC958_AES3_CON_FS_22050;
  

• break;
  

• case 24000:

• bytes[3] |= IEC958_AES3_CON_FS_24000;
  

• break;
  

• case 32000:

• bytes[3] |= IEC958_AES3_CON_FS_32000;
  

• break;
  

• case 44100:

• bytes[3] |= IEC958_AES3_CON_FS_44100;
  

• break;
  

• case 48000:

• bytes[3] |= IEC958_AES3_CON_FS_48000;
  

• break;
  

• case 88200:

• bytes[3] |= IEC958_AES3_CON_FS_88200;
  

• break;
  

• case 96000:

• bytes[3] |= IEC958_AES3_CON_FS_96000;
  

• break;
  

• case 176400:

• bytes[3] |= IEC958_AES3_CON_FS_176400;
  

• break;
  

• case 192000:

• bytes[3] |= IEC958_AES3_CON_FS_192000;
  

• break;
  

• default:

• printk(KERN_WARNING "unsupported sampling rate: %d\n", rate);
  

• return -EINVAL;
  

• }
• mcasp_set_reg(mcasp, DAVINCI_MCASP_DITCSRA_REG, val);
• mcasp_set_reg(mcasp, DAVINCI_MCASP_DITCSRB_REG, val);
• return 0;

}

@@ -634,7 +679,7 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream, return ret;

if (mcasp->op_mode == DAVINCI_MCASP_DIT_MODE)

• ret = mcasp_dit_hw_param(mcasp);
  

• ret = mcasp_dit_hw_param(mcasp, params_rate(params));
  

  else ret = mcasp_i2s_hw_param(mcasp, substream->stream);