[PATCH AUTOSEL 4.19 1/9] ASoC: nau8824: Fix semaphore unbalance at error paths
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ]
The semaphore of nau8824 wasn't properly unlocked at some error handling code paths, hence this may result in the unbalance (and potential lock-up). Fix them to handle the semaphore up properly.
Signed-off-by: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/nau8824.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index 4af87340b1655..4f18bb272e929 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -1075,6 +1075,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component); unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div; + int err = -EINVAL;
nau8824_sema_acquire(nau8824, HZ);
@@ -1091,7 +1092,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_DAC_OVERSAMPLE_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_DAC_SRC_MASK, osr_dac_sel[osr].clk_src << NAU8824_CLK_DAC_SRC_SFT); @@ -1101,7 +1102,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_ADC_SYNC_DOWN_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_ADC_SRC_MASK, osr_adc_sel[osr].clk_src << NAU8824_CLK_ADC_SRC_SFT); @@ -1122,7 +1123,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, else if (bclk_fs <= 256) bclk_div = 0; else - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_2, NAU8824_I2S_LRC_DIV_MASK | NAU8824_I2S_BLK_DIV_MASK, @@ -1143,15 +1144,17 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, val_len |= NAU8824_I2S_DL_32; break; default: - return -EINVAL; + goto error; }
regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DL_MASK, val_len); + err = 0;
+ error: nau8824_sema_release(nau8824);
- return 0; + return err; }
static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) @@ -1160,8 +1163,6 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component); unsigned int ctrl1_val = 0, ctrl2_val = 0;
- nau8824_sema_acquire(nau8824, HZ); - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8824_I2S_MS_MASTER; @@ -1203,6 +1204,8 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; }
+ nau8824_sema_acquire(nau8824, HZ); + regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DF_MASK | NAU8824_I2S_BP_MASK | NAU8824_I2S_PCMB_EN, ctrl1_val);
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ]
It seems that the beep playback doesn't work well on IDT codec devices when the codec auto-pm is enabled. Keep the power on while the beep switch is enabled.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544 Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_sigmatel.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 85c33f528d7b3..2f6e4e3afd8f2 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -222,6 +222,7 @@ struct sigmatel_spec {
/* beep widgets */ hda_nid_t anabeep_nid; + bool beep_power_on;
/* SPDIF-out mux */ const char * const *spdif_labels; @@ -4463,6 +4464,26 @@ static int stac_suspend(struct hda_codec *codec) stac_shutup(codec); return 0; } + +static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) +{ + struct sigmatel_spec *spec = codec->spec; + int ret = snd_hda_gen_check_power_status(codec, nid); + +#ifdef CONFIG_SND_HDA_INPUT_BEEP + if (nid == spec->gen.beep_nid && codec->beep) { + if (codec->beep->enabled != spec->beep_power_on) { + spec->beep_power_on = codec->beep->enabled; + if (spec->beep_power_on) + snd_hda_power_up_pm(codec); + else + snd_hda_power_down_pm(codec); + } + ret |= spec->beep_power_on; + } +#endif + return ret; +} #else #define stac_suspend NULL #endif /* CONFIG_PM */ @@ -4475,6 +4496,7 @@ static const struct hda_codec_ops stac_patch_ops = { .unsol_event = snd_hda_jack_unsol_event, #ifdef CONFIG_PM .suspend = stac_suspend, + .check_power_status = stac_check_power_status, #endif .reboot_notify = stac_shutup, };
From: Dongxiang Ke kdx.glider@gmail.com
[ Upstream commit e53f47f6c1a56d2af728909f1cb894da6b43d9bf ]
There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device.
Fix this by checking the number of interfaces.
Signed-off-by: Dongxiang Ke kdx.glider@gmail.com Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/stream.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 9a950aaf5e356..1cfb30465df7d 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -1111,7 +1111,7 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no) * Dallas DS4201 workaround: It presents 5 altsettings, but the last * one misses syncpipe, and does not produce any sound. */ - if (chip->usb_id == USB_ID(0x04fa, 0x4201)) + if (chip->usb_id == USB_ID(0x04fa, 0x4201) && num >= 4) num = 4;
for (i = 0; i < num; i++) {
participants (1)
-
Sasha Levin