dmaengine expects the maxburst parameter in words, not bytes. The imxdma driver and its users do this wrong. Fix this.

As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work with imx-dma. This broke the driver with imx-sdma support which correctly takes the maxburst parameter in words. This patch puts the sdma based sound back to work.

Signed-off-by: Sascha Hauer s.hauer@pengutronix.de ---

I made this as a cross subsystem patch to maintain bisectability. I suggest to push it either via my tree or the dmaengine tree.

drivers/dma/imx-dma.c | 3 ++- drivers/mmc/host/mxcmmc.c | 8 ++++---- sound/soc/imx/imx-pcm-dma-mx2.c | 4 ++-- 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index e18eaab..d99f71c 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -135,7 +135,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, if (ret) return ret;

- imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level); + imx_dma_config_burstlen(imxdmac->imxdma_channel, + imxdmac->watermark_level * imxdmac->word_size);

return 0; default: diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index cc20e02..14aa213 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -715,13 +715,13 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) int burstlen, ret;

/* - * use burstlen of 64 in 4 bit mode (--> reg value 0) - * use burstlen of 16 in 1 bit mode (--> reg value 16) + * use burstlen of 64 (16 words) in 4 bit mode (--> reg value 0) + * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16) */ if (ios->bus_width == MMC_BUS_WIDTH_4) - burstlen = 64; - else burstlen = 16; + else + burstlen = 4;

if (mxcmci_use_dma(host) && burstlen != host->burstlen) { host->burstlen = burstlen; diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c index 4173b3d..43fdc24f 100644 --- a/sound/soc/imx/imx-pcm-dma-mx2.c +++ b/sound/soc/imx/imx-pcm-dma-mx2.c @@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream, slave_config.direction = DMA_TO_DEVICE; slave_config.dst_addr = dma_params->dma_addr; slave_config.dst_addr_width = buswidth; - slave_config.dst_maxburst = dma_params->burstsize * buswidth; + slave_config.dst_maxburst = dma_params->burstsize; } else { slave_config.direction = DMA_FROM_DEVICE; slave_config.src_addr = dma_params->dma_addr; slave_config.src_addr_width = buswidth; - slave_config.src_maxburst = dma_params->burstsize * buswidth; + slave_config.src_maxburst = dma_params->burstsize; }

ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);