Embed a copy of struct wm8962_pdata in stuct wm8962_priv so that there's no need to check validity of pdata any more.

Signed-off-by: Nicolin Chen b42378@freescale.com --- sound/soc/codecs/wm8962.c | 66 ++++++++++++++++++++++++--------------------- 1 files changed, 35 insertions(+), 31 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index e971028..d56dd86 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -51,6 +51,7 @@ static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = {

/* codec private data */ struct wm8962_priv { + struct wm8962_pdata pdata; struct regmap *regmap; struct snd_soc_codec *codec;

@@ -2345,12 +2346,13 @@ static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {

static int wm8962_add_widgets(struct snd_soc_codec *codec) { - struct wm8962_pdata *pdata = dev_get_platdata(codec->dev); + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_pdata *pdata = &wm8962->pdata; struct snd_soc_dapm_context *dapm = &codec->dapm;

snd_soc_add_codec_controls(codec, wm8962_snd_controls, ARRAY_SIZE(wm8962_snd_controls)); - if (pdata && pdata->spk_mono) + if (pdata->spk_mono) snd_soc_add_codec_controls(codec, wm8962_spk_mono_controls, ARRAY_SIZE(wm8962_spk_mono_controls)); else @@ -2360,7 +2362,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)

snd_soc_dapm_new_controls(dapm, wm8962_dapm_widgets, ARRAY_SIZE(wm8962_dapm_widgets)); - if (pdata && pdata->spk_mono) + if (pdata->spk_mono) snd_soc_dapm_new_controls(dapm, wm8962_dapm_spk_mono_widgets, ARRAY_SIZE(wm8962_dapm_spk_mono_widgets)); else @@ -2369,7 +2371,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)

snd_soc_dapm_add_routes(dapm, wm8962_intercon, ARRAY_SIZE(wm8962_intercon)); - if (pdata && pdata->spk_mono) + if (pdata->spk_mono) snd_soc_dapm_add_routes(dapm, wm8962_spk_mono_intercon, ARRAY_SIZE(wm8962_spk_mono_intercon)); else @@ -3333,14 +3335,14 @@ static struct gpio_chip wm8962_template_chip = { static void wm8962_init_gpio(struct snd_soc_codec *codec) { struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); - struct wm8962_pdata *pdata = dev_get_platdata(codec->dev); + struct wm8962_pdata *pdata = &wm8962->pdata; int ret;

wm8962->gpio_chip = wm8962_template_chip; wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO; wm8962->gpio_chip.dev = codec->dev;

- if (pdata && pdata->gpio_base) + if (pdata->gpio_base) wm8962->gpio_chip.base = pdata->gpio_base; else wm8962->gpio_chip.base = -1; @@ -3373,7 +3375,7 @@ static int wm8962_probe(struct snd_soc_codec *codec) { int ret; struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); - struct wm8962_pdata *pdata = dev_get_platdata(codec->dev); + struct wm8962_pdata *pdata = &wm8962->pdata; u16 *reg_cache = codec->reg_cache; int i, trigger, irq_pol; bool dmicclk, dmicdat; @@ -3421,30 +3423,28 @@ static int wm8962_probe(struct snd_soc_codec *codec) WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA, 0);

- if (pdata) { - /* Apply static configuration for GPIOs */ - for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) - if (pdata->gpio_init[i]) { - wm8962_set_gpio_mode(codec, i + 1); - snd_soc_write(codec, 0x200 + i, - pdata->gpio_init[i] & 0xffff); - } + /* Apply static configuration for GPIOs */ + for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) + if (pdata->gpio_init[i]) { + wm8962_set_gpio_mode(codec, i + 1); + snd_soc_write(codec, 0x200 + i, + pdata->gpio_init[i] & 0xffff); + }

- /* Put the speakers into mono mode? */ - if (pdata->spk_mono) - reg_cache[WM8962_CLASS_D_CONTROL_2] - |= WM8962_SPK_MONO; + /* Put the speakers into mono mode? */ + if (pdata->spk_mono) + reg_cache[WM8962_CLASS_D_CONTROL_2] + |= WM8962_SPK_MONO;

- /* Micbias setup, detection enable and detection - * threasholds. */ - if (pdata->mic_cfg) - snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4, - WM8962_MICDET_ENA | - WM8962_MICDET_THR_MASK | - WM8962_MICSHORT_THR_MASK | - WM8962_MICBIAS_LVL, - pdata->mic_cfg); - } + /* Micbias setup, detection enable and detection + * threasholds. */ + if (pdata->mic_cfg) + snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4, + WM8962_MICDET_ENA | + WM8962_MICDET_THR_MASK | + WM8962_MICSHORT_THR_MASK | + WM8962_MICBIAS_LVL, + pdata->mic_cfg);

/* Latch volume update bits */ snd_soc_update_bits(codec, WM8962_LEFT_INPUT_VOLUME, @@ -3506,7 +3506,7 @@ static int wm8962_probe(struct snd_soc_codec *codec) wm8962_init_gpio(codec);

if (wm8962->irq) { - if (pdata && pdata->irq_active_low) { + if (pdata->irq_active_low) { trigger = IRQF_TRIGGER_LOW; irq_pol = WM8962_IRQ_POL; } else { @@ -3603,6 +3603,10 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, init_completion(&wm8962->fll_lock); wm8962->irq = i2c->irq;

+ /* If platform data was supplied, update the default data in priv */ + if (pdata) + memcpy(&wm8962->pdata, pdata, sizeof(struct wm8962_pdata)); + for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++) wm8962->supplies[i].supply = wm8962_supply_names[i];

@@ -3666,7 +3670,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, goto err_enable; }

- if (pdata && pdata->in4_dc_measure) { + if (wm8962->pdata.in4_dc_measure) { ret = regmap_register_patch(wm8962->regmap, wm8962_dc_measure, ARRAY_SIZE(wm8962_dc_measure));

Document the device tree binding for the WM8962 codec, and modify the driver to extract platform data from the device tree, if present.

Based on work of WM8903 by Stephen Warren swarren@nvidia.com

Signed-off-by: Nicolin Chen b42378@freescale.com --- Documentation/devicetree/bindings/sound/wm8962.txt | 20 +++++++++++ sound/soc/codecs/wm8962.c | 35 +++++++++++++++++++- 2 files changed, 54 insertions(+), 1 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/wm8962.txt b/Documentation/devicetree/bindings/sound/wm8962.txt index dceb3b1..855d723 100644 --- a/Documentation/devicetree/bindings/sound/wm8962.txt +++ b/Documentation/devicetree/bindings/sound/wm8962.txt @@ -8,9 +8,29 @@ Required properties:

- reg : the I2C address of the device.

+Optional properties: + - spk-mono: Default register value for SPK_MONO of R51 (Class D Control 2). + + - mic-cfg : Default register value for R48 (Additional Control 4). + If absent, the default is 0. + + - gpio-cfg : A list of GPIO configuration register values. The list must + be 6 entries long. If absent, no configuration of these registers is + performed. And note that only the value within [0x0, 0xffff] is valid. + Any other value will be regarded as setting the GPIO register by its + default value 0x0. Example:

codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; + + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; }; diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index d56dd86..26219ea 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3584,6 +3584,34 @@ static const struct regmap_config wm8962_regmap = { .cache_type = REGCACHE_RBTREE, };

+static int wm8962_set_pdata_from_of(struct i2c_client *i2c, + struct wm8962_pdata *pdata) +{ + const struct device_node *np = i2c->dev.of_node; + u32 val32; + int i; + + if (of_property_read_bool(np, "spk-mono")) + pdata->spk_mono = true; + + if (of_property_read_u32(np, "mic-cfg", &val32) >= 0) + pdata->mic_cfg = val32; + + if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_init, + ARRAY_SIZE(pdata->gpio_init)) >= 0) + for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) { + /* + * The range of GPIO register value is [0x0, 0xffff] + * While the default value of each register is 0x0 + * Any other value will be regarded as default value + */ + if (pdata->gpio_init[i] > 0xffff) + pdata->gpio_init[i] = 0x0; + } + + return 0; +} + static int wm8962_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -3604,8 +3632,13 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, wm8962->irq = i2c->irq;

/* If platform data was supplied, update the default data in priv */ - if (pdata) + if (pdata) { memcpy(&wm8962->pdata, pdata, sizeof(struct wm8962_pdata)); + } else if (i2c->dev.of_node) { + ret = wm8962_set_pdata_from_of(i2c, &wm8962->pdata); + if (ret != 0) + return ret; + }

for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++) wm8962->supplies[i].supply = wm8962_supply_names[i];