[alsa-devel] [PATCH] ASoC: snappercl15: Convert to table based DAPM setup
Use table based setup to register the DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> --- sound/soc/cirrus/snappercl15.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c index 29238a7..bdc88e5 100644 --- a/sound/soc/cirrus/snappercl15.c +++ b/sound/soc/cirrus/snappercl15.c @@ -65,18 +65,6 @@ static const struct snd_soc_dapm_route audio_map[] = { {"MICIN", NULL, "Mic Jack"}, }; -static int snappercl15_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - snd_soc_dapm_new_controls(dapm, tlv320aic23_dapm_widgets, - ARRAY_SIZE(tlv320aic23_dapm_widgets)); - - snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); - return 0; -} - static struct snd_soc_dai_link snappercl15_dai = { .name = "tlv320aic23", .stream_name = "AIC23", @@ -84,7 +72,6 @@ static struct snd_soc_dai_link snappercl15_dai = { .codec_dai_name = "tlv320aic23-hifi", .codec_name = "tlv320aic23-codec.0-001a", .platform_name = "ep93xx-i2s", - .init = snappercl15_tlv320aic23_init, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_CBS_CFS, .ops = &snappercl15_ops, @@ -95,6 +82,11 @@ static struct snd_soc_card snd_soc_snappercl15 = { .owner = THIS_MODULE, .dai_link = &snappercl15_dai, .num_links = 1, + + .dapm_widgets = tlv320aic23_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets), + .dapm_routes = audio_map, + .num_dapm_routes = ARRAY_SIZE(audio_map), }; static int snappercl15_probe(struct platform_device *pdev) -- 1.8.0
Cc: Ryan's new e-mail address On 03/03/2014 08:10 AM, Lars-Peter Clausen wrote:
Use table based setup to register the DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> --- sound/soc/cirrus/snappercl15.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c index 29238a7..bdc88e5 100644 --- a/sound/soc/cirrus/snappercl15.c +++ b/sound/soc/cirrus/snappercl15.c @@ -65,18 +65,6 @@ static const struct snd_soc_dapm_route audio_map[] = { {"MICIN", NULL, "Mic Jack"}, };
-static int snappercl15_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - snd_soc_dapm_new_controls(dapm, tlv320aic23_dapm_widgets, - ARRAY_SIZE(tlv320aic23_dapm_widgets)); - - snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); - return 0; -} - static struct snd_soc_dai_link snappercl15_dai = { .name = "tlv320aic23", .stream_name = "AIC23", @@ -84,7 +72,6 @@ static struct snd_soc_dai_link snappercl15_dai = { .codec_dai_name = "tlv320aic23-hifi", .codec_name = "tlv320aic23-codec.0-001a", .platform_name = "ep93xx-i2s", - .init = snappercl15_tlv320aic23_init, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_CBS_CFS, .ops = &snappercl15_ops, @@ -95,6 +82,11 @@ static struct snd_soc_card snd_soc_snappercl15 = { .owner = THIS_MODULE, .dai_link = &snappercl15_dai, .num_links = 1, + + .dapm_widgets = tlv320aic23_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets), + .dapm_routes = audio_map, + .num_dapm_routes = ARRAY_SIZE(audio_map), };
static int snappercl15_probe(struct platform_device *pdev)
On 03/03/14 18:13, Lars-Peter Clausen wrote:
Cc: Ryan's new e-mail address
On 03/03/2014 08:10 AM, Lars-Peter Clausen wrote:
Use table based setup to register the DAPM widgets and routes. This on one hand makes the code a bit shorter and cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> --- sound/soc/cirrus/snappercl15.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c index 29238a7..bdc88e5 100644 --- a/sound/soc/cirrus/snappercl15.c +++ b/sound/soc/cirrus/snappercl15.c @@ -65,18 +65,6 @@ static const struct snd_soc_dapm_route audio_map[] = { {"MICIN", NULL, "Mic Jack"}, };
-static int snappercl15_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - snd_soc_dapm_new_controls(dapm, tlv320aic23_dapm_widgets, - ARRAY_SIZE(tlv320aic23_dapm_widgets)); - - snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map)); - return 0; -} - static struct snd_soc_dai_link snappercl15_dai = { .name = "tlv320aic23", .stream_name = "AIC23", @@ -84,7 +72,6 @@ static struct snd_soc_dai_link snappercl15_dai = { .codec_dai_name = "tlv320aic23-hifi", .codec_name = "tlv320aic23-codec.0-001a", .platform_name = "ep93xx-i2s", - .init = snappercl15_tlv320aic23_init, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_CBS_CFS, .ops = &snappercl15_ops, @@ -95,6 +82,11 @@ static struct snd_soc_card snd_soc_snappercl15 = { .owner = THIS_MODULE, .dai_link = &snappercl15_dai, .num_links = 1, + + .dapm_widgets = tlv320aic23_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets), + .dapm_routes = audio_map, + .num_dapm_routes = ARRAY_SIZE(audio_map),
One really minor nit. The rest of this file has tab aligned structure initialisers. Can we keep this consistent please. ~Ryan
participants (2)
-
Lars-Peter Clausen -
Ryan Mallon