[PATCH v3 0/5] Add pin control support for lpass sc7280
This patch series is to split lpass variant common pin control functions and SoC specific functions and to add lpass sc7280 pincontrol support. It also Adds dt-bindings for lpass sc7280 lpass lpi pincontrol.
Changes Since V2: -- Add new dt-bindings for sc7280 lpi driver. -- Make clock voting change as separate patch. -- Split existing pincontrol driver and make common functions as part of separate file. -- Rename lpass pincontrol lpi dt-bindings to sm8250 specific dt-bindings Changes Since V1: -- Make lpi pinctrl variant data structure as constant -- Add appropriate commit message -- Change signedoff by sequence.
Srinivasa Rao Mandadapu (5): dt-bindings: pinctrl: qcom: Update lpass lpi file name to SoC specific dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings pinctrl: qcom: Move chip specific functions to right files pinctrl: qcom: Update clock voting as optional pinctrl: qcom: Add SC7280 lpass pin configuration
.../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 130 ----------- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 ++++++++++ .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 130 +++++++++++ drivers/pinctrl/qcom/Makefile | 2 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 253 +-------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 140 ++++++++++++ drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 127 +++++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++ 8 files changed, 646 insertions(+), 376 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
Change generic lpass lpi pincotrol bindings file to SoC specific file, to distinguish and accomadate other SoC specific dt bindings.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org --- .../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 130 --------------------- .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 130 +++++++++++++++++++++ 2 files changed, 130 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml deleted file mode 100644 index e47ebf9..0000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml +++ /dev/null @@ -1,130 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block - -maintainers: - - Srinivas Kandagatla srinivas.kandagatla@linaro.org - -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs - -properties: - compatible: - const: qcom,sm8250-lpass-lpi-pinctrl - - reg: - minItems: 2 - maxItems: 2 - - clocks: - items: - - description: LPASS Core voting clock - - description: LPASS Audio voting clock - - clock-names: - items: - - const: core - - const: audio - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '-pins$': - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" - - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9])$" - minItems: 1 - maxItems: 14 - - function: - enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, - qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, - dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, - i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, - dmic3_data, i2s2_data ] - description: - Specify the alternative function to be configured for the specified - pins. - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - function - - additionalProperties: false - -required: - - compatible - - reg - - clocks - - clock-names - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/sound/qcom,q6afe.h> - lpi_tlmm: pinctrl@33c0000 { - compatible = "qcom,sm8250-lpass-lpi-pinctrl"; - reg = <0x33c0000 0x20000>, - <0x3550000 0x10000>; - clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - clock-names = "core", "audio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&lpi_tlmm 0 0 14>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000..e47ebf9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sm8250-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 14 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + lpi_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8250-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 14>; + };
On Mon, 29 Nov 2021 15:28:48 +0530, Srinivasa Rao Mandadapu wrote:
Change generic lpass lpi pincotrol bindings file to SoC specific file, to distinguish and accomadate other SoC specific dt bindings.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org
.../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 130 --------------------- .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 130 +++++++++++++++++++++ 2 files changed, 130 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1561071
This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.
On 29/11/2021 09:58, Srinivasa Rao Mandadapu wrote:
Change generic lpass lpi pincotrol bindings file to SoC specific file, to distinguish and accomadate other SoC specific dt bindings.
TBH, for adding sc7820 lpass lpi support, this rename patch is totally not necessary.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org
.../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 130 --------------------- .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 130 +++++++++++++++++++++
Consider using "git mv" when renaming files, this would give a better diff stat.
--srini
2 files changed, 130 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml deleted file mode 100644 index e47ebf9..0000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml +++ /dev/null @@ -1,130 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
-$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
- Low Power Island (LPI) TLMM block
-maintainers:
- Srinivas Kandagatla srinivas.kandagatla@linaro.org
-description: |
- This binding describes the Top Level Mode Multiplexer block found in the
- LPASS LPI IP on most Qualcomm SoCs
-properties:
- compatible:
- const: qcom,sm8250-lpass-lpi-pinctrl
- reg:
- minItems: 2
- maxItems: 2
- clocks:
- items:
- description: LPASS Core voting clock- description: LPASS Audio voting clock- clock-names:
- items:
- const: core- const: audio- gpio-controller: true
- '#gpio-cells':
- description: Specifying the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h- const: 2
- gpio-ranges:
- maxItems: 1
-#PIN CONFIGURATION NODES -patternProperties:
- '-pins$':
- type: object
- description:
Pinctrl node's client devices use subnodes for desired pin configuration.Client device subnodes use below standard properties.- $ref: "/schemas/pinctrl/pincfg-node.yaml"
- properties:
pins:description:List of gpio pins affected by the properties specified in thissubnode.items:oneOf:- pattern: "^gpio([0-9]|[1-9][0-9])$"minItems: 1maxItems: 14function:enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,dmic3_data, i2s2_data ]description:Specify the alternative function to be configured for the specifiedpins.drive-strength:enum: [2, 4, 6, 8, 10, 12, 14, 16]default: 2description:Selects the drive strength for the specified pins, in mA.slew-rate:enum: [0, 1, 2, 3]default: 0description: |0: No adjustments1: Higher Slew rate (faster edges)2: Lower Slew rate (slower edges)3: Reserved (No adjustments)bias-pull-down: truebias-pull-up: truebias-disable: trueoutput-high: trueoutput-low: true- required:
- pins- function- additionalProperties: false
-required:
- compatible
- reg
- clocks
- clock-names
- gpio-controller
- '#gpio-cells'
- gpio-ranges
-additionalProperties: false
-examples:
- |
- #include <dt-bindings/sound/qcom,q6afe.h>
- lpi_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8250-lpass-lpi-pinctrl";reg = <0x33c0000 0x20000>,<0x3550000 0x10000>;clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;clock-names = "core", "audio";gpio-controller;#gpio-cells = <2>;gpio-ranges = <&lpi_tlmm 0 0 14>;- };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000..e47ebf9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
- Low Power Island (LPI) TLMM block
+maintainers:
- Srinivas Kandagatla srinivas.kandagatla@linaro.org
+description: |
- This binding describes the Top Level Mode Multiplexer block found in the
- LPASS LPI IP on most Qualcomm SoCs
+properties:
- compatible:
- const: qcom,sm8250-lpass-lpi-pinctrl
- reg:
- minItems: 2
- maxItems: 2
- clocks:
- items:
- description: LPASS Core voting clock- description: LPASS Audio voting clock- clock-names:
- items:
- const: core- const: audio- gpio-controller: true
- '#gpio-cells':
- description: Specifying the pin number and flags, as defined in
include/dt-bindings/gpio/gpio.h- const: 2
- gpio-ranges:
- maxItems: 1
+#PIN CONFIGURATION NODES +patternProperties:
- '-pins$':
- type: object
- description:
Pinctrl node's client devices use subnodes for desired pin configuration.Client device subnodes use below standard properties.- $ref: "/schemas/pinctrl/pincfg-node.yaml"
- properties:
pins:description:List of gpio pins affected by the properties specified in thissubnode.items:oneOf:- pattern: "^gpio([0-9]|[1-9][0-9])$"minItems: 1maxItems: 14function:enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,dmic3_data, i2s2_data ]description:Specify the alternative function to be configured for the specifiedpins.drive-strength:enum: [2, 4, 6, 8, 10, 12, 14, 16]default: 2description:Selects the drive strength for the specified pins, in mA.slew-rate:enum: [0, 1, 2, 3]default: 0description: |0: No adjustments1: Higher Slew rate (faster edges)2: Lower Slew rate (slower edges)3: Reserved (No adjustments)bias-pull-down: truebias-pull-up: truebias-disable: trueoutput-high: trueoutput-low: true- required:
- pins- function- additionalProperties: false
+required:
- compatible
- reg
- clocks
- clock-names
- gpio-controller
- '#gpio-cells'
- gpio-ranges
+additionalProperties: false
+examples:
- |
- #include <dt-bindings/sound/qcom,q6afe.h>
- lpi_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8250-lpass-lpi-pinctrl";reg = <0x33c0000 0x20000>,<0x3550000 0x10000>;clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;clock-names = "core", "audio";gpio-controller;#gpio-cells = <2>;gpio-ranges = <&lpi_tlmm 0 0 14>;- };
Add device tree binding Documentation details for Qualcomm SC7280 LPASS LPI pinctrl driver.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org --- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 +++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000..62babb8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivasa Rao Mandadapu srivasam@codeaurora.org + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sc7280-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 15 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + };
On Mon, 29 Nov 2021 15:28:49 +0530, Srinivasa Rao Mandadapu wrote:
Add device tree binding Documentation details for Qualcomm SC7280 LPASS LPI pinctrl driver.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org
.../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 +++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml: duplicate '$id' value 'http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#'
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1561073
This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.
Update lpass lpi pin control driver to accommodate new lpass variant SoC specific drivers. Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file and common declarations to pinctrl-lpass-lpi.h header file.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org --- drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 251 +----------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 139 +++++++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++++ 4 files changed, 271 insertions(+), 245 deletions(-) create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 7a12e8c..74568cf 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2f19ab4..2641489 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,237 +4,16 @@ * Copyright (c) 2020 Linaro Ltd. */
-#include <linux/bitops.h> -#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/gpio/driver.h> -#include <linux/io.h> -#include <linux/module.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/types.h> #include "../core.h" #include "../pinctrl-utils.h" +#include "pinctrl-lpass-lpi.h"
-#define LPI_SLEW_RATE_CTL_REG 0xa000 -#define LPI_TLMM_REG_OFFSET 0x1000 -#define LPI_SLEW_RATE_MAX 0x03 -#define LPI_SLEW_BITS_SIZE 0x02 -#define LPI_SLEW_RATE_MASK GENMASK(1, 0) -#define LPI_GPIO_CFG_REG 0x00 -#define LPI_GPIO_PULL_MASK GENMASK(1, 0) -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) -#define LPI_GPIO_OE_MASK BIT(9) -#define LPI_GPIO_VALUE_REG 0x04 -#define LPI_GPIO_VALUE_IN_MASK BIT(0) -#define LPI_GPIO_VALUE_OUT_MASK BIT(1) - -#define LPI_GPIO_BIAS_DISABLE 0x0 -#define LPI_GPIO_PULL_DOWN 0x1 -#define LPI_GPIO_KEEPER 0x2 -#define LPI_GPIO_PULL_UP 0x3 -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) -#define NO_SLEW -1 - -#define LPI_FUNCTION(fname) \ - [LPI_MUX_##fname] = { \ - .name = #fname, \ - .groups = fname##_groups, \ - .ngroups = ARRAY_SIZE(fname##_groups), \ - } - -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ - { \ - .name = "gpio" #id, \ - .pins = gpio##id##_pins, \ - .pin = id, \ - .slew_offset = soff, \ - .npins = ARRAY_SIZE(gpio##id##_pins), \ - .funcs = (int[]){ \ - LPI_MUX_gpio, \ - LPI_MUX_##f1, \ - LPI_MUX_##f2, \ - LPI_MUX_##f3, \ - LPI_MUX_##f4, \ - }, \ - .nfuncs = 5, \ - } - -struct lpi_pingroup { - const char *name; - const unsigned int *pins; - unsigned int npins; - unsigned int pin; - /* Bit offset in slew register for SoundWire pins only */ - int slew_offset; - unsigned int *funcs; - unsigned int nfuncs; -}; - -struct lpi_function { - const char *name; - const char * const *groups; - unsigned int ngroups; -}; - -struct lpi_pinctrl_variant_data { - const struct pinctrl_pin_desc *pins; - int npins; - const struct lpi_pingroup *groups; - int ngroups; - const struct lpi_function *functions; - int nfunctions; -}; - -#define MAX_LPI_NUM_CLKS 2 - -struct lpi_pinctrl { - struct device *dev; - struct pinctrl_dev *ctrl; - struct gpio_chip chip; - struct pinctrl_desc desc; - char __iomem *tlmm_base; - char __iomem *slew_base; - struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; - struct mutex slew_access_lock; - const struct lpi_pinctrl_variant_data *data; -}; - -/* sm8250 variant specific data */ -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { - PINCTRL_PIN(0, "gpio0"), - PINCTRL_PIN(1, "gpio1"), - PINCTRL_PIN(2, "gpio2"), - PINCTRL_PIN(3, "gpio3"), - PINCTRL_PIN(4, "gpio4"), - PINCTRL_PIN(5, "gpio5"), - PINCTRL_PIN(6, "gpio6"), - PINCTRL_PIN(7, "gpio7"), - PINCTRL_PIN(8, "gpio8"), - PINCTRL_PIN(9, "gpio9"), - PINCTRL_PIN(10, "gpio10"), - PINCTRL_PIN(11, "gpio11"), - PINCTRL_PIN(12, "gpio12"), - PINCTRL_PIN(13, "gpio13"), -}; - -enum sm8250_lpi_functions { - LPI_MUX_dmic1_clk, - LPI_MUX_dmic1_data, - LPI_MUX_dmic2_clk, - LPI_MUX_dmic2_data, - LPI_MUX_dmic3_clk, - LPI_MUX_dmic3_data, - LPI_MUX_i2s1_clk, - LPI_MUX_i2s1_data, - LPI_MUX_i2s1_ws, - LPI_MUX_i2s2_clk, - LPI_MUX_i2s2_data, - LPI_MUX_i2s2_ws, - LPI_MUX_qua_mi2s_data, - LPI_MUX_qua_mi2s_sclk, - LPI_MUX_qua_mi2s_ws, - LPI_MUX_swr_rx_clk, - LPI_MUX_swr_rx_data, - LPI_MUX_swr_tx_clk, - LPI_MUX_swr_tx_data, - LPI_MUX_wsa_swr_clk, - LPI_MUX_wsa_swr_data, - LPI_MUX_gpio, - LPI_MUX__, -}; - -static const unsigned int gpio0_pins[] = { 0 }; -static const unsigned int gpio1_pins[] = { 1 }; -static const unsigned int gpio2_pins[] = { 2 }; -static const unsigned int gpio3_pins[] = { 3 }; -static const unsigned int gpio4_pins[] = { 4 }; -static const unsigned int gpio5_pins[] = { 5 }; -static const unsigned int gpio6_pins[] = { 6 }; -static const unsigned int gpio7_pins[] = { 7 }; -static const unsigned int gpio8_pins[] = { 8 }; -static const unsigned int gpio9_pins[] = { 9 }; -static const unsigned int gpio10_pins[] = { 10 }; -static const unsigned int gpio11_pins[] = { 11 }; -static const unsigned int gpio12_pins[] = { 12 }; -static const unsigned int gpio13_pins[] = { 13 }; -static const char * const swr_tx_clk_groups[] = { "gpio0" }; -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; -static const char * const swr_rx_clk_groups[] = { "gpio3" }; -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; -static const char * const dmic1_clk_groups[] = { "gpio6" }; -static const char * const dmic1_data_groups[] = { "gpio7" }; -static const char * const dmic2_clk_groups[] = { "gpio8" }; -static const char * const dmic2_data_groups[] = { "gpio9" }; -static const char * const i2s2_clk_groups[] = { "gpio10" }; -static const char * const i2s2_ws_groups[] = { "gpio11" }; -static const char * const dmic3_clk_groups[] = { "gpio12" }; -static const char * const dmic3_data_groups[] = { "gpio13" }; -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; -static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; -static const char * const i2s1_clk_groups[] = { "gpio6" }; -static const char * const i2s1_ws_groups[] = { "gpio7" }; -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; -static const char * const wsa_swr_clk_groups[] = { "gpio10" }; -static const char * const wsa_swr_data_groups[] = { "gpio11" }; -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; - -static const struct lpi_pingroup sm8250_groups[] = { - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), - LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), - LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), - LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), - LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), - LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), - LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), -}; - -static const struct lpi_function sm8250_functions[] = { - LPI_FUNCTION(dmic1_clk), - LPI_FUNCTION(dmic1_data), - LPI_FUNCTION(dmic2_clk), - LPI_FUNCTION(dmic2_data), - LPI_FUNCTION(dmic3_clk), - LPI_FUNCTION(dmic3_data), - LPI_FUNCTION(i2s1_clk), - LPI_FUNCTION(i2s1_data), - LPI_FUNCTION(i2s1_ws), - LPI_FUNCTION(i2s2_clk), - LPI_FUNCTION(i2s2_data), - LPI_FUNCTION(i2s2_ws), - LPI_FUNCTION(qua_mi2s_data), - LPI_FUNCTION(qua_mi2s_sclk), - LPI_FUNCTION(qua_mi2s_ws), - LPI_FUNCTION(swr_rx_clk), - LPI_FUNCTION(swr_rx_data), - LPI_FUNCTION(swr_tx_clk), - LPI_FUNCTION(swr_tx_data), - LPI_FUNCTION(wsa_swr_clk), - LPI_FUNCTION(wsa_swr_data), -}; - -static struct lpi_pinctrl_variant_data sm8250_lpi_data = { - .pins = sm8250_lpi_pins, - .npins = ARRAY_SIZE(sm8250_lpi_pins), - .groups = sm8250_groups, - .ngroups = ARRAY_SIZE(sm8250_groups), - .functions = sm8250_functions, - .nfunctions = ARRAY_SIZE(sm8250_functions), -};
static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin, unsigned int addr) @@ -582,7 +361,7 @@ static const struct gpio_chip lpi_gpio_template = { .dbg_show = lpi_gpio_dbg_show, };
-static int lpi_pinctrl_probe(struct platform_device *pdev) +int lpi_pinctrl_probe(struct platform_device *pdev) { const struct lpi_pinctrl_variant_data *data; struct device *dev = &pdev->dev; @@ -661,8 +440,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
return ret; } +EXPORT_SYMBOL(lpi_pinctrl_probe); +
-static int lpi_pinctrl_remove(struct platform_device *pdev) +int lpi_pinctrl_remove(struct platform_device *pdev) { struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
@@ -671,25 +452,5 @@ static int lpi_pinctrl_remove(struct platform_device *pdev)
return 0; } +EXPORT_SYMBOL(lpi_pinctrl_remove);
-static const struct of_device_id lpi_pinctrl_of_match[] = { - { - .compatible = "qcom,sm8250-lpass-lpi-pinctrl", - .data = &sm8250_lpi_data, - }, - { } -}; -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); - -static struct platform_driver lpi_pinctrl_driver = { - .driver = { - .name = "qcom-lpass-lpi-pinctrl", - .of_match_table = lpi_pinctrl_of_match, - }, - .probe = lpi_pinctrl_probe, - .remove = lpi_pinctrl_remove, -}; - -module_platform_driver(lpi_pinctrl_driver); -MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h new file mode 100644 index 0000000..b0afb40 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -0,0 +1,139 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ +#ifndef __PINCTRL_LPASS_LPI_H__ +#define __PINCTRL_LPASS_LPI_H__ + +#define LPI_SLEW_RATE_CTL_REG 0xa000 +#define LPI_TLMM_REG_OFFSET 0x1000 +#define LPI_SLEW_RATE_MAX 0x03 +#define LPI_SLEW_BITS_SIZE 0x02 +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) +#define LPI_GPIO_CFG_REG 0x00 +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) +#define LPI_GPIO_OE_MASK BIT(9) +#define LPI_GPIO_VALUE_REG 0x04 +#define LPI_GPIO_VALUE_IN_MASK BIT(0) +#define LPI_GPIO_VALUE_OUT_MASK BIT(1) + +#define LPI_GPIO_BIAS_DISABLE 0x0 +#define LPI_GPIO_PULL_DOWN 0x1 +#define LPI_GPIO_KEEPER 0x2 +#define LPI_GPIO_PULL_UP 0x3 +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) +#define NO_SLEW -1 + +#define LPI_FUNCTION(fname) \ + [LPI_MUX_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .pin = id, \ + .slew_offset = soff, \ + .npins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + LPI_MUX_gpio, \ + LPI_MUX_##f1, \ + LPI_MUX_##f2, \ + LPI_MUX_##f3, \ + LPI_MUX_##f4, \ + }, \ + .nfuncs = 5, \ + } + +struct lpi_pingroup { + const char *name; + const unsigned int *pins; + unsigned int npins; + unsigned int pin; + /* Bit offset in slew register for SoundWire pins only */ + int slew_offset; + unsigned int *funcs; + unsigned int nfuncs; +}; + +struct lpi_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +struct lpi_pinctrl_variant_data { + const struct pinctrl_pin_desc *pins; + int npins; + const struct lpi_pingroup *groups; + int ngroups; + const struct lpi_function *functions; + int nfunctions; +}; + +#define MAX_LPI_NUM_CLKS 2 + +struct lpi_pinctrl { + struct device *dev; + struct pinctrl_dev *ctrl; + struct gpio_chip chip; + struct pinctrl_desc desc; + char __iomem *tlmm_base; + char __iomem *slew_base; + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; + struct mutex slew_access_lock; + const struct lpi_pinctrl_variant_data *data; +}; + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static const unsigned int gpio0_pins[] = { 0 }; +static const unsigned int gpio1_pins[] = { 1 }; +static const unsigned int gpio2_pins[] = { 2 }; +static const unsigned int gpio3_pins[] = { 3 }; +static const unsigned int gpio4_pins[] = { 4 }; +static const unsigned int gpio5_pins[] = { 5 }; +static const unsigned int gpio6_pins[] = { 6 }; +static const unsigned int gpio7_pins[] = { 7 }; +static const unsigned int gpio8_pins[] = { 8 }; +static const unsigned int gpio9_pins[] = { 9 }; +static const unsigned int gpio10_pins[] = { 10 }; +static const unsigned int gpio11_pins[] = { 11 }; +static const unsigned int gpio12_pins[] = { 12 }; +static const unsigned int gpio13_pins[] = { 13 }; + +int lpi_pinctrl_probe(struct platform_device *pdev); +int lpi_pinctrl_remove(struct platform_device *pdev); + +#endif /*__PINCTRL_LPASS_LPI_H__*/ + diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c new file mode 100644 index 0000000..3eba8b3 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ + +#include <linux/clk.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "pinctrl-lpass-lpi.h" + +/* sm8250 variant specific data */ +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; + +static const struct lpi_pingroup sm8250_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), + LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), +}; + +static const struct lpi_function sm8250_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static struct lpi_pinctrl_variant_data sm8250_lpi_data = { + .pins = sm8250_lpi_pins, + .npins = ARRAY_SIZE(sm8250_lpi_pins), + .groups = sm8250_groups, + .ngroups = ARRAY_SIZE(sm8250_groups), + .functions = sm8250_functions, + .nfunctions = ARRAY_SIZE(sm8250_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sm8250-lpass-lpi-pinctrl", + .data = &sm8250_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8250-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); +
On 29/11/2021 09:58, Srinivasa Rao Mandadapu wrote:
Update lpass lpi pin control driver to accommodate new lpass variant SoC specific drivers. Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file and common declarations to pinctrl-lpass-lpi.h header file.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org
drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 251 +----------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 139 +++++++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++++ 4 files changed, 271 insertions(+), 245 deletions(-) create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 7a12e8c..74568cf 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
This is confusing, either we make new CONFIG_PINCTRL_SM8250_LPASS_LPI here and use it for pinctrl-sm8250-lpass-lpi.o
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2f19ab4..2641489 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,237 +4,16 @@
- Copyright (c) 2020 Linaro Ltd.
*/
-#include <linux/bitops.h> -#include <linux/bitfield.h>
Looks like some of these are removed without a reason.
#include <linux/clk.h> #include <linux/gpio/driver.h> -#include <linux/io.h> -#include <linux/module.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/types.h> #include "../core.h" #include "../pinctrl-utils.h" +#include "pinctrl-lpass-lpi.h"
...
-module_platform_driver(lpi_pinctrl_driver); -MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); -MODULE_LICENSE("GPL");
if you build this as Modules your build would fail without MODULE_LICENSE().
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h new file mode 100644 index 0000000..b0afb40 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -0,0 +1,139 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/*
- Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
- Copyright (c) 2020 Linaro Ltd.
- */
+#ifndef __PINCTRL_LPASS_LPI_H__ +#define __PINCTRL_LPASS_LPI_H__
+#define LPI_SLEW_RATE_CTL_REG 0xa000 +#define LPI_TLMM_REG_OFFSET 0x1000 +#define LPI_SLEW_RATE_MAX 0x03 +#define LPI_SLEW_BITS_SIZE 0x02 +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) +#define LPI_GPIO_CFG_REG 0x00 +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) +#define LPI_GPIO_OE_MASK BIT(9) +#define LPI_GPIO_VALUE_REG 0x04 +#define LPI_GPIO_VALUE_IN_MASK BIT(0) +#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
+#define LPI_GPIO_BIAS_DISABLE 0x0 +#define LPI_GPIO_PULL_DOWN 0x1 +#define LPI_GPIO_KEEPER 0x2 +#define LPI_GPIO_PULL_UP 0x3 +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) +#define NO_SLEW -1
+#define LPI_FUNCTION(fname) \
- [LPI_MUX_##fname] = { \
.name = #fname, \.groups = fname##_groups, \.ngroups = ARRAY_SIZE(fname##_groups), \- }
+#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
- { \
.name = "gpio" #id, \.pins = gpio##id##_pins, \.pin = id, \.slew_offset = soff, \.npins = ARRAY_SIZE(gpio##id##_pins), \.funcs = (int[]){ \LPI_MUX_gpio, \LPI_MUX_##f1, \LPI_MUX_##f2, \LPI_MUX_##f3, \LPI_MUX_##f4, \}, \.nfuncs = 5, \- }
+struct lpi_pingroup {
- const char *name;
- const unsigned int *pins;
- unsigned int npins;
- unsigned int pin;
- /* Bit offset in slew register for SoundWire pins only */
- int slew_offset;
- unsigned int *funcs;
- unsigned int nfuncs;
+};
+struct lpi_function {
- const char *name;
- const char * const *groups;
- unsigned int ngroups;
+};
+struct lpi_pinctrl_variant_data {
- const struct pinctrl_pin_desc *pins;
- int npins;
- const struct lpi_pingroup *groups;
- int ngroups;
- const struct lpi_function *functions;
- int nfunctions;
+};
+#define MAX_LPI_NUM_CLKS 2
+struct lpi_pinctrl {
- struct device *dev;
- struct pinctrl_dev *ctrl;
- struct gpio_chip chip;
- struct pinctrl_desc desc;
- char __iomem *tlmm_base;
- char __iomem *slew_base;
- struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
- struct mutex slew_access_lock;
- const struct lpi_pinctrl_variant_data *data;
+};
From here <<<
+enum lpass_lpi_functions {
- LPI_MUX_dmic1_clk,
- LPI_MUX_dmic1_data,
- LPI_MUX_dmic2_clk,
- LPI_MUX_dmic2_data,
- LPI_MUX_dmic3_clk,
- LPI_MUX_dmic3_data,
- LPI_MUX_i2s1_clk,
- LPI_MUX_i2s1_data,
- LPI_MUX_i2s1_ws,
- LPI_MUX_i2s2_clk,
- LPI_MUX_i2s2_data,
- LPI_MUX_i2s2_ws,
- LPI_MUX_qua_mi2s_data,
- LPI_MUX_qua_mi2s_sclk,
- LPI_MUX_qua_mi2s_ws,
- LPI_MUX_swr_rx_clk,
- LPI_MUX_swr_rx_data,
- LPI_MUX_swr_tx_clk,
- LPI_MUX_swr_tx_data,
- LPI_MUX_wsa_swr_clk,
- LPI_MUX_wsa_swr_data,
- LPI_MUX_gpio,
- LPI_MUX__,
+};
+static const unsigned int gpio0_pins[] = { 0 }; +static const unsigned int gpio1_pins[] = { 1 }; +static const unsigned int gpio2_pins[] = { 2 }; +static const unsigned int gpio3_pins[] = { 3 }; +static const unsigned int gpio4_pins[] = { 4 }; +static const unsigned int gpio5_pins[] = { 5 }; +static const unsigned int gpio6_pins[] = { 6 }; +static const unsigned int gpio7_pins[] = { 7 }; +static const unsigned int gpio8_pins[] = { 8 }; +static const unsigned int gpio9_pins[] = { 9 }; +static const unsigned int gpio10_pins[] = { 10 }; +static const unsigned int gpio11_pins[] = { 11 }; +static const unsigned int gpio12_pins[] = { 12 }; +static const unsigned int gpio13_pins[] = { 13 };
to here are specific to sm8250, so it should not be in header file to start with.
+int lpi_pinctrl_probe(struct platform_device *pdev); +int lpi_pinctrl_remove(struct platform_device *pdev);
+#endif /*__PINCTRL_LPASS_LPI_H__*/
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c new file mode 100644 index 0000000..3eba8b3 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only +/*
...
+static struct platform_driver lpi_pinctrl_driver = {
- .driver = {
.name = "qcom-sm8250-lpass-lpi-pinctrl",.of_match_table = lpi_pinctrl_of_match,- },
- .probe = lpi_pinctrl_probe,
- .remove = lpi_pinctrl_remove,
+};
+module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
may be : "SM8250 LPI GPIO pin control driver"
--srini
+MODULE_LICENSE("GPL");
On 12/1/2021 4:11 PM, Srinivas Kandagatla wrote: Thanks for your time Srini!!!
On 29/11/2021 09:58, Srinivasa Rao Mandadapu wrote:
Update lpass lpi pin control driver to accommodate new lpass variant SoC specific drivers. Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file and common declarations to pinctrl-lpass-lpi.h header file.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org
drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 251 +----------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 139 +++++++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++++ 4 files changed, 271 insertions(+), 245 deletions(-) create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 7a12e8c..74568cf 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
This is confusing, either we make new CONFIG_PINCTRL_SM8250_LPASS_LPI here and use it for pinctrl-sm8250-lpass-lpi.o
Okay. Will add new config macro. Thought of changing it, but worried that existing platforms may get disturbed.
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2f19ab4..2641489 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,237 +4,16 @@ * Copyright (c) 2020 Linaro Ltd. */ -#include <linux/bitops.h> -#include <linux/bitfield.h>
Looks like some of these are removed without a reason.
Actually, as functions distributed to different files, moved few of them to corresponding files,
and observed few of them are not required. could you please suggest on this?
#include <linux/clk.h> #include <linux/gpio/driver.h> -#include <linux/io.h> -#include <linux/module.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/types.h> #include "../core.h" #include "../pinctrl-utils.h" +#include "pinctrl-lpass-lpi.h"
...
-module_platform_driver(lpi_pinctrl_driver); -MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); -MODULE_LICENSE("GPL");
if you build this as Modules your build would fail without MODULE_LICENSE().
Okay. Will change accordingly.
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h new file mode 100644 index 0000000..b0afb40 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -0,0 +1,139 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/*
- Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
- Copyright (c) 2020 Linaro Ltd.
- */
+#ifndef __PINCTRL_LPASS_LPI_H__ +#define __PINCTRL_LPASS_LPI_H__
+#define LPI_SLEW_RATE_CTL_REG 0xa000 +#define LPI_TLMM_REG_OFFSET 0x1000 +#define LPI_SLEW_RATE_MAX 0x03 +#define LPI_SLEW_BITS_SIZE 0x02 +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) +#define LPI_GPIO_CFG_REG 0x00 +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) +#define LPI_GPIO_OE_MASK BIT(9) +#define LPI_GPIO_VALUE_REG 0x04 +#define LPI_GPIO_VALUE_IN_MASK BIT(0) +#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
+#define LPI_GPIO_BIAS_DISABLE 0x0 +#define LPI_GPIO_PULL_DOWN 0x1 +#define LPI_GPIO_KEEPER 0x2 +#define LPI_GPIO_PULL_UP 0x3 +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) +#define NO_SLEW -1
+#define LPI_FUNCTION(fname) \ + [LPI_MUX_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + }
+#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .pin = id, \ + .slew_offset = soff, \ + .npins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + LPI_MUX_gpio, \ + LPI_MUX_##f1, \ + LPI_MUX_##f2, \ + LPI_MUX_##f3, \ + LPI_MUX_##f4, \ + }, \ + .nfuncs = 5, \ + }
+struct lpi_pingroup { + const char *name; + const unsigned int *pins; + unsigned int npins; + unsigned int pin; + /* Bit offset in slew register for SoundWire pins only */ + int slew_offset; + unsigned int *funcs; + unsigned int nfuncs; +};
+struct lpi_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +};
+struct lpi_pinctrl_variant_data { + const struct pinctrl_pin_desc *pins; + int npins; + const struct lpi_pingroup *groups; + int ngroups; + const struct lpi_function *functions; + int nfunctions; +};
+#define MAX_LPI_NUM_CLKS 2
+struct lpi_pinctrl { + struct device *dev; + struct pinctrl_dev *ctrl; + struct gpio_chip chip; + struct pinctrl_desc desc; + char __iomem *tlmm_base; + char __iomem *slew_base; + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; + struct mutex slew_access_lock; + const struct lpi_pinctrl_variant_data *data; +};
From here <<<
+enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +};
+static const unsigned int gpio0_pins[] = { 0 }; +static const unsigned int gpio1_pins[] = { 1 }; +static const unsigned int gpio2_pins[] = { 2 }; +static const unsigned int gpio3_pins[] = { 3 }; +static const unsigned int gpio4_pins[] = { 4 }; +static const unsigned int gpio5_pins[] = { 5 }; +static const unsigned int gpio6_pins[] = { 6 }; +static const unsigned int gpio7_pins[] = { 7 }; +static const unsigned int gpio8_pins[] = { 8 }; +static const unsigned int gpio9_pins[] = { 9 }; +static const unsigned int gpio10_pins[] = { 10 }; +static const unsigned int gpio11_pins[] = { 11 }; +static const unsigned int gpio12_pins[] = { 12 }; +static const unsigned int gpio13_pins[] = { 13 };
to here are specific to sm8250, so it should not be in header file to start with.
As these are common to all lpass variants.. I feel it's better to keep in Header file.
And if new pins comes in later variants, we can add them incrementally, and they will not impact existing pin numbers.
I think in upcoming variants number of pins will not decrease.
+int lpi_pinctrl_probe(struct platform_device *pdev); +int lpi_pinctrl_remove(struct platform_device *pdev);
+#endif /*__PINCTRL_LPASS_LPI_H__*/
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c new file mode 100644 index 0000000..3eba8b3 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only +/*
...
+static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8250-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +};
+module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
may be : "SM8250 LPI GPIO pin control driver"
Okay.. will change accordingly.
--srini
+MODULE_LICENSE("GPL");
On 01/12/2021 14:33, Srinivasa Rao Mandadapu wrote:
+enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +};
+static const unsigned int gpio0_pins[] = { 0 }; +static const unsigned int gpio1_pins[] = { 1 }; +static const unsigned int gpio2_pins[] = { 2 }; +static const unsigned int gpio3_pins[] = { 3 }; +static const unsigned int gpio4_pins[] = { 4 }; +static const unsigned int gpio5_pins[] = { 5 }; +static const unsigned int gpio6_pins[] = { 6 }; +static const unsigned int gpio7_pins[] = { 7 }; +static const unsigned int gpio8_pins[] = { 8 }; +static const unsigned int gpio9_pins[] = { 9 }; +static const unsigned int gpio10_pins[] = { 10 }; +static const unsigned int gpio11_pins[] = { 11 }; +static const unsigned int gpio12_pins[] = { 12 }; +static const unsigned int gpio13_pins[] = { 13 };
to here are specific to sm8250, so it should not be in header file to start with.
As these are common to all lpass variants.. I feel it's better to keep in Header file.
You realize that every include of this file will add these static variables to file, in this case to pinctrl-lpass-lpi.c, pinctrl-sm8250-lpass-lpi.c and pinctrl-sc7280-lpass-lpi.c so in first file(pinctrl-lpass-lpi.c) you never use those variables in second file (pinctrl-sm8250-lpass-lpi.c)you only use up to gpio13 and in third file pinctrl-sc7280-lpass-lpi.c you could use them.
so its really bad idea to add static variables in header files.
--srini
And if new pins comes in later variants, we can add them incrementally, and they will not impact existing pin numbers.
I think in upcoming variants number of pins will not decrease.
On 12/1/2021 8:37 PM, Srinivas Kandagatla wrote: Thanks for clarification Srini!!
On 01/12/2021 14:33, Srinivasa Rao Mandadapu wrote:
+enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +};
+static const unsigned int gpio0_pins[] = { 0 }; +static const unsigned int gpio1_pins[] = { 1 }; +static const unsigned int gpio2_pins[] = { 2 }; +static const unsigned int gpio3_pins[] = { 3 }; +static const unsigned int gpio4_pins[] = { 4 }; +static const unsigned int gpio5_pins[] = { 5 }; +static const unsigned int gpio6_pins[] = { 6 }; +static const unsigned int gpio7_pins[] = { 7 }; +static const unsigned int gpio8_pins[] = { 8 }; +static const unsigned int gpio9_pins[] = { 9 }; +static const unsigned int gpio10_pins[] = { 10 }; +static const unsigned int gpio11_pins[] = { 11 }; +static const unsigned int gpio12_pins[] = { 12 }; +static const unsigned int gpio13_pins[] = { 13 };
to here are specific to sm8250, so it should not be in header file to start with.
As these are common to all lpass variants.. I feel it's better to keep in Header file.
You realize that every include of this file will add these static variables to file, in this case to pinctrl-lpass-lpi.c, pinctrl-sm8250-lpass-lpi.c and pinctrl-sc7280-lpass-lpi.c so in first file(pinctrl-lpass-lpi.c) you never use those variables in second file (pinctrl-sm8250-lpass-lpi.c)you only use up to gpio13 and in third file pinctrl-sc7280-lpass-lpi.c you could use them.
so its really bad idea to add static variables in header files.
Okay. Understood. will move it SoC specific files.
--srini
And if new pins comes in later variants, we can add them incrementally, and they will not impact existing pin numbers.
I think in upcoming variants number of pins will not decrease.
Update bulk clock voting to optional voting as ADSP bypass platform doesn't need macro and decodec clocks, these are maintained as power domains and operated from lpass audio core cc.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2641489..d28135b 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -394,7 +394,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(pctrl->slew_base), "Slew resource not provided\n");
- ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks); + ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks); if (ret) return dev_err_probe(dev, ret, "Can't get clocks\n");
Add pin control support for SC7280 LPASS LPI.
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org Co-developed-by: Venkata Prasad Potturu potturu@codeaurora.org Signed-off-by: Venkata Prasad Potturu potturu@codeaurora.org --- drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 1 + drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 127 ++++++++++++++++++++++++ 3 files changed, 129 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 74568cf..e07be79 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -38,3 +38,4 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h index b0afb40..1b91585 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -131,6 +131,7 @@ static const unsigned int gpio10_pins[] = { 10 }; static const unsigned int gpio11_pins[] = { 11 }; static const unsigned int gpio12_pins[] = { 12 }; static const unsigned int gpio13_pins[] = { 13 }; +static const unsigned int gpio14_pins[] = { 14 };
int lpi_pinctrl_probe(struct platform_device *pdev); int lpi_pinctrl_remove(struct platform_device *pdev); diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c new file mode 100644 index 0000000..38b2056 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + * ALSA SoC platform-machine driver for QTi LPASS + */ + +#include <linux/clk.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "pinctrl-lpass-lpi.h" + +/* sc7280 variant specific data */ +static const struct pinctrl_pin_desc sc7280_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" }; + +static const struct lpi_pingroup sc7280_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_rx_data, _, _, _), + LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), + LPI_PINGROUP(14, 6, swr_tx_data, _, _, _), +}; + +static const struct lpi_function sc7280_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static const struct lpi_pinctrl_variant_data sc7280_lpi_data = { + .pins = sc7280_lpi_pins, + .npins = ARRAY_SIZE(sc7280_lpi_pins), + .groups = sc7280_groups, + .ngroups = ARRAY_SIZE(sc7280_groups), + .functions = sc7280_functions, + .nfunctions = ARRAY_SIZE(sc7280_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sc7280-lpass-lpi-pinctrl", + .data = &sc7280_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sc7280-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); +
participants (3)
-
Rob Herring -
Srinivas Kandagatla -
Srinivasa Rao Mandadapu