[alsa-devel] Testers wanted: New SB X-Fi driver
At Tue, 30 Jun 2009 16:10:45 +0200, Matthias Diehl wrote:
hi,
i guess you dont speak german, do you? well, i'll try it in
english ;-)
i tried to install your newest x-fi "hack" in ubuntu 9.04 64bit.
it's an x-fi extreme music. i downloaded this snapshot:
ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-unstable-snapshot.tar.gz
Use alsa-driver-snapshot.tar.gz instead of the unstable one.
while the installation process there are some warnings. after replacing the demon.conf and reboot there was no sound.
then i noticed the sentence "Note that the ctxfi driver might conflict with the HD-audio driver" in the description. i think my problem is the hdmi soundchip from my graphics adapter (sapphire radeon hd 4870) which was automatically installed at the ubuntu-installation ("hda intel sound").
You are likely looking at irrelevant things.
There are several variants of X-Fi boards. Many of them are equipped with emu20k1 or emu20k2 chip. Some of these models can behave as HD-audio compatible, too. These are supported by snd-ctxfi driver.
In addition, there is X-Fi models that are without emu20k1/emu20k2 chips. Some of them (CA0110-IBG) behave only as a HD-audio device, and some others are with CA0106 chip. The former is supported by snd-hda-intel driver and the latter by snd-ca0106 driver.
So, they cannot be deactivated. The only question is whether you have emu20k1/emu20k2 chip on your board. And this can be checked when you load snd-ctxfi driver. If the driver is properly loaded and the card instance is created (see /proc/asound/cards), then it's good. Otherwise, your board is no such one. You need other drivers.
Please ask further questions on alsa-devel ML (you can add me to Cc, though) so that other people with your board can advice better.
HTH,
Takashi
hi there, i now tried to install the stable version, but i have still no sound. here's what lspci | grep audio says: 01:00.1 Audio device: ATI Technologies Inc HD48x0 audio 05:00.0 Multimedia audio controller: Creative Labs SB X-Fi lsmod | grep snd says: snd_hda_intel 557492 1 snd_pcm_oss 52352 0 snd_mixer_oss 24960 2 snd_pcm_oss snd_pcm 99336 2 snd_hda_intel,snd_pcm_oss snd_seq_dummy 11524 0 snd_seq_oss 41984 0 snd_seq_midi 15744 0 snd_rawmidi 33920 1 snd_seq_midi snd_seq_midi_event 16512 2 snd_seq_oss,snd_seq_midi snd_seq 66272 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 34064 2 snd_pcm,snd_seq snd_seq_device 16276 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 78792 9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 16800 2 snd snd_page_alloc 18704 2 snd_hda_intel,snd_pcm cat /proc/asound/cards says: 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xf7dfc000 irq 17 i hope, someone can help me ... greetings from germany, matthias
Am Dienstag 30 Juni 2009 19:55:44 schrieb Matthias Diehl:
At Tue, 30 Jun 2009 16:10:45 +0200,
Matthias Diehl wrote:
hi,
i guess you dont speak german, do you? well, i'll try it in
english ;-)
i tried to install your newest x-fi "hack" in ubuntu 9.04 64bit.
Interesting enough, I don't manage to get it working under 64 ("SuSE 11.1, 64 Bit, Xen") bit either. Could you check if you also see something in your syslog (e.g. /var/log/messages) when running speaker-test ? When I tested the same on the same hardware on "Kubuntu Karmic alpha 2, 32 bit", I get sound. It might be an indication of a either: - a 32/64 bit issue - the kernel version (Kubuntu karmic ships with 2.6.30) - Xen vs non-Xen - something else Christian
I also use the ubuntu 904 64bit,and a similar hardware, it works for me pretty well .now I can hear 5.1 sound just like the windows driver offer have you intslled soundcard driver? I use the following install stage $./configure --with-card=ctxfi $make $sudo make modules install and then restart(if not the old alsa code will make snd-ctxfi driver module unloadable) $sudo modprobe snd-ctxfi and if it still not work please give some information about $dmesg here's what lspci | grep audio says: 01:00.1 Audio device: ATI Technologies Inc HD48x0 audio 03:02.0 Multimedia audio controller: Creative Labs SB X-Fi cat /proc/asound/cards says: 0 [XFi ]: SB-XFi - Creative X-Fi Creative X-Fi 20K1 Unknown lsmod|grep xfi snd_ctxfi 102376 3 snd_pcm 99336 2 snd_ctxfi,snd_pcm_oss snd 77256 15 snd_ctxfi,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_seq_device On Wed, Jul 1, 2009 at 1:55 AM, Matthias Diehl <mdiehl.os@gmx.de> wrote:
At Tue, 30 Jun 2009 16:10:45 +0200, Matthias Diehl wrote:
hi,
i guess you dont speak german, do you? well, i'll try it in
english ;-)
i tried to install your newest x-fi "hack" in ubuntu 9.04 64bit.
it's an x-fi extreme music. i downloaded this snapshot:
ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-unstable-snapshot.tar.gz
Use alsa-driver-snapshot.tar.gz instead of the unstable one.
while the installation process there are some warnings. after replacing the demon.conf and reboot there was no sound.
then i noticed the sentence "Note that the ctxfi driver might conflict with the HD-audio driver" in the description. i think my problem is the hdmi soundchip from my graphics adapter (sapphire radeon hd 4870) which was automatically installed at the ubuntu-installation ("hda intel sound").
You are likely looking at irrelevant things.
There are several variants of X-Fi boards. Many of them are equipped with emu20k1 or emu20k2 chip. Some of these models can behave as HD-audio compatible, too. These are supported by snd-ctxfi driver.
In addition, there is X-Fi models that are without emu20k1/emu20k2 chips. Some of them (CA0110-IBG) behave only as a HD-audio device, and some others are with CA0106 chip. The former is supported by snd-hda-intel driver and the latter by snd-ca0106 driver.
So, they cannot be deactivated. The only question is whether you have emu20k1/emu20k2 chip on your board. And this can be checked when you load snd-ctxfi driver. If the driver is properly loaded and the card instance is created (see /proc/asound/cards), then it's good. Otherwise, your board is no such one. You need other drivers.
Please ask further questions on alsa-devel ML (you can add me to Cc, though) so that other people with your board can advice better.
HTH,
Takashi
hi there,
i now tried to install the stable version, but i have still no sound. here's what lspci | grep audio says: 01:00.1 Audio device: ATI Technologies Inc HD48x0 audio 05:00.0 Multimedia audio controller: Creative Labs SB X-Fi
lsmod | grep snd says: snd_hda_intel 557492 1 snd_pcm_oss 52352 0 snd_mixer_oss 24960 2 snd_pcm_oss snd_pcm 99336 2 snd_hda_intel,snd_pcm_oss snd_seq_dummy 11524 0 snd_seq_oss 41984 0 snd_seq_midi 15744 0 snd_rawmidi 33920 1 snd_seq_midi snd_seq_midi_event 16512 2 snd_seq_oss,snd_seq_midi snd_seq 66272 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 34064 2 snd_pcm,snd_seq snd_seq_device 16276 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 78792 9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 16800 2 snd snd_page_alloc 18704 2 snd_hda_intel,snd_pcm
cat /proc/asound/cards says: 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xf7dfc000 irq 17
i hope, someone can help me ... greetings from germany, matthias
_______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Sat, 4 Jul 2009 23:27:04 +0200, Christian Esken wrote:
Am Dienstag 30 Juni 2009 19:55:44 schrieb Matthias Diehl:
At Tue, 30 Jun 2009 16:10:45 +0200,
Matthias Diehl wrote:
hi,
i guess you dont speak german, do you? well, i'll try it in
english ;-)
i tried to install your newest x-fi "hack" in ubuntu 9.04 64bit.
Interesting enough, I don't manage to get it working under 64 ("SuSE 11.1, 64 Bit, Xen") bit either. Could you check if you also see something in your syslog (e.g. /var/log/messages) when running speaker-test ?
When I tested the same on the same hardware on "Kubuntu Karmic alpha 2, 32 bit", I get sound.
It might be an indication of a either: - a 32/64 bit issue - the kernel version (Kubuntu karmic ships with 2.6.30) - Xen vs non-Xen - something else
The 64bit issue might depend on the card model. Which model do you have? You can see in /proc/asound/cards. What about the patch below? Takashi --- diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c index ad3e1d1..bab0203 100644 --- a/sound/pci/ctxfi/cthw20k1.c +++ b/sound/pci/ctxfi/cthw20k1.c @@ -1275,7 +1275,7 @@ static int hw_trn_init(struct hw *hw, const struct trn_conf *info) trnctl = 0x13; /* 32-bit, 4k-size page */ ptp_phys_low = (u32)info->vm_pgt_phys; ptp_phys_high = upper_32_bits(info->vm_pgt_phys); - if (sizeof(void *) == 8) /* 64bit address */ + if (ptp_phys_high) /* 64bit address */ trnctl |= (1 << 2); #if 0 /* Only 4k h/w pages for simplicitiy */ #if PAGE_SIZE == 8192 diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c index 0c4db2d..269c7f1 100644 --- a/sound/pci/ctxfi/cthw20k2.c +++ b/sound/pci/ctxfi/cthw20k2.c @@ -1237,7 +1237,7 @@ static int hw_trn_init(struct hw *hw, const struct trn_conf *info) vmctl = 0x80000C0F; /* 32-bit, 4k-size page */ ptp_phys_low = (u32)info->vm_pgt_phys; ptp_phys_high = upper_32_bits(info->vm_pgt_phys); - if (sizeof(void *) == 8) /* 64bit address */ + if (ptp_phys_high) /* 64bit address */ vmctl |= (3 << 8); /* Write page table physical address to all PTPAL registers */ for (i = 0; i < 64; i++) {
participants (4)
-
Christian Esken -
Matthias Diehl -
Takashi Iwai -
周吴军