[PATCH v7 2/2] ASoC: rt715:add micmute led state control supports
From: Perry Yuan perry_yuan@dell.com
Some new Dell system is going to support audio internal micphone privacy setting from hardware level with micmute led state changing When micmute hotkey pressed by user, soft mute will need to be enabled firstly in case of pop noise, and codec driver need to react to mic mute event to EC(embedded controller) notifying that SW mute is completed Then EC will do the hardware mute physically within the timeout reached
This patch allow codec rt715 and rt715 sdca driver to change the local micmute led state. Dell privacy led trigger driver will ack EC when micmute key pressed through this micphone led control interface like hda_generic provided ACPI method defined in dell-privacy micmute led trigger will be called for notifying the EC that software mute has been completed, then hardware audio circuit solution controlled by EC will switch the audio input source off/on
Signed-off-by: Perry Yuan perry_yuan@dell.com
-------- v5 -> v6: * addresed review comments from Jaroslav * add quirks for micmute led control as short term solution to control micmute led state change * add comments for the invert checking v4 -> v5: * rebase to latest 5.12 rc4 upstream kernel v3 -> v4: * remove unused debug log * remove compile flag of DELL privacy * move the micmute_led to local from rt715_priv * when Jaroslav upstream his gerneric LED trigger driver,I will rebase this patch,please consider merge this at first https://lore.kernel.org/alsa-devel/20210211111400.1131020-1-perex@perex.cz/ v2 -> v3: * simplify the patch to reuse some val value * add more detail to the commit info v1 -> v2: * fix some format issue -------- --- sound/soc/codecs/rt715-sdca.c | 42 ++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt715.c | 43 +++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+)
diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c index 20528afbdc57..47dc31f7f3e3 100644 --- a/sound/soc/codecs/rt715-sdca.c +++ b/sound/soc/codecs/rt715-sdca.c @@ -11,12 +11,14 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/leds.h> #include <linux/pm_runtime.h> #include <linux/pm.h> #include <linux/soundwire/sdw.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -344,6 +346,32 @@ static int rt715_sdca_get_volsw(struct snd_kcontrol *kcontrol, return 0; }
+static bool micmute_led_set; +static int dmi_matched(const struct dmi_system_id *dmi) +{ + micmute_led_set = 1; + return 1; +} + +/* Some systems will need to use this to trigger mic mute LED state changed */ +static const struct dmi_system_id micmute_led_dmi_table[] = { + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), + }, + }, + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), + }, + }, + {}, +}; + static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -358,6 +386,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = p->invert; int err; + bool micmute_led;
for (i = 0; i < 4; i++) { if (ucontrol->value.integer.value[i] != rt715->kctl_switch_orig[i]) { @@ -394,6 +423,18 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, return err; }
+ /* Micmute LED state changed by muted/unmute switch + * to keep syncing with actual hardware mic mute led state + * invert will be checked to change the state switch + */ + if (invert && micmute_led_set) { + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) + micmute_led = LED_OFF; + else + micmute_led = LED_ON; + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); + } + return k_changed; }
@@ -1066,6 +1107,7 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave)
pm_runtime_mark_last_busy(&slave->dev); pm_runtime_put_autosuspend(&slave->dev); + dmi_check_system(micmute_led_dmi_table);
return 0; } diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c index 34c3357e943b..59d05b28f52e 100644 --- a/sound/soc/codecs/rt715.c +++ b/sound/soc/codecs/rt715.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/leds.h> #include <linux/pm_runtime.h> #include <linux/pm.h> #include <linux/soundwire/sdw.h> @@ -25,6 +26,7 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/of_device.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -70,6 +72,32 @@ static void rt715_get_gain(struct rt715_priv *rt715, unsigned int addr_h, pr_err("Failed to get L channel gain.\n"); }
+static bool micmute_led_set; +static int dmi_matched(const struct dmi_system_id *dmi) +{ + micmute_led_set = 1; + return 1; +} + +/* Some systems will need to use this to trigger mic mute LED state changed */ +static const struct dmi_system_id micmute_led_dmi_table[] = { + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"), + }, + }, + { + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"), + }, + }, + {}, +}; + /* For Verb-Set Amplifier Gain (Verb ID = 3h) */ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -88,6 +116,7 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, RT715_SET_GAIN_MIX_ADC2_L}; unsigned int addr_h, addr_l, val_h, val_ll, val_lr; unsigned int read_ll, read_rl, i, j, loop_cnt; + bool micmute_led;
if (strstr(ucontrol->id.name, "Main Capture Switch") || strstr(ucontrol->id.name, "Main Capture Volume")) @@ -185,6 +214,19 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) regmap_write(rt715->regmap, RT715_SET_AUDIO_POWER_STATE, AC_PWRST_D3); + + /* Micmute LED state changed by muted/unmute switch + * to keep syncing with actual hardware mic mute led state + * invert will be checked to change the state switch + */ + if (mc->invert && micmute_led_set) { + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) + micmute_led = LED_OFF; + else + micmute_led = LED_ON; + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led); + } + return 0; }
@@ -901,6 +943,7 @@ int rt715_io_init(struct device *dev, struct sdw_slave *slave)
pm_runtime_mark_last_busy(&slave->dev); pm_runtime_put_autosuspend(&slave->dev); + dmi_check_system(micmute_led_dmi_table);
return 0; }
Hi Perry,
On 4/12/21 11:19 AM, Perry Yuan wrote:
From: Perry Yuan perry_yuan@dell.com
Some new Dell system is going to support audio internal micphone privacy setting from hardware level with micmute led state changing When micmute hotkey pressed by user, soft mute will need to be enabled firstly in case of pop noise, and codec driver need to react to mic mute event to EC(embedded controller) notifying that SW mute is completed Then EC will do the hardware mute physically within the timeout reached
This patch allow codec rt715 and rt715 sdca driver to change the local micmute led state. Dell privacy led trigger driver will ack EC when micmute key pressed through this micphone led control interface like hda_generic provided ACPI method defined in dell-privacy micmute led trigger will be called for notifying the EC that software mute has been completed, then hardware audio circuit solution controlled by EC will switch the audio input source off/on
Signed-off-by: Perry Yuan perry_yuan@dell.com
The ALSA kernel-patch-set which I mentioned in previous discussions, which allows controlling this through sysfs has been merged upstream and is currently in for-nex.t. So IMHO you should use the new sysfs mechanism for this rather then adding quirks to individual codec drivers.
Regards,
Hans
v5 -> v6:
- addresed review comments from Jaroslav
- add quirks for micmute led control as short term solution to control micmute led state change
- add comments for the invert checking
v4 -> v5:
- rebase to latest 5.12 rc4 upstream kernel
v3 -> v4:
- remove unused debug log
- remove compile flag of DELL privacy
- move the micmute_led to local from rt715_priv
- when Jaroslav upstream his gerneric LED trigger driver,I will rebase this patch,please consider merge this at first https://lore.kernel.org/alsa-devel/20210211111400.1131020-1-perex@perex.cz/
v2 -> v3:
- simplify the patch to reuse some val value
- add more detail to the commit info
v1 -> v2:
- fix some format issue
sound/soc/codecs/rt715-sdca.c | 42 ++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt715.c | 43 +++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+)
diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c index 20528afbdc57..47dc31f7f3e3 100644 --- a/sound/soc/codecs/rt715-sdca.c +++ b/sound/soc/codecs/rt715-sdca.c @@ -11,12 +11,14 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/leds.h> #include <linux/pm_runtime.h> #include <linux/pm.h> #include <linux/soundwire/sdw.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -344,6 +346,32 @@ static int rt715_sdca_get_volsw(struct snd_kcontrol *kcontrol, return 0; }
+static bool micmute_led_set; +static int dmi_matched(const struct dmi_system_id *dmi) +{
- micmute_led_set = 1;
- return 1;
+}
+/* Some systems will need to use this to trigger mic mute LED state changed */ +static const struct dmi_system_id micmute_led_dmi_table[] = {
- {
.callback = dmi_matched,.matches = {DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),DMI_MATCH(DMI_PRODUCT_SKU, "0A32"),},- },
- {
.callback = dmi_matched,.matches = {DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"),},- },
- {},
+};
static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -358,6 +386,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = p->invert; int err;
bool micmute_led;
for (i = 0; i < 4; i++) { if (ucontrol->value.integer.value[i] != rt715->kctl_switch_orig[i]) {
@@ -394,6 +423,18 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol, return err; }
- /* Micmute LED state changed by muted/unmute switch
* to keep syncing with actual hardware mic mute led state* invert will be checked to change the state switch*/- if (invert && micmute_led_set) {
if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1])micmute_led = LED_OFF;elsemicmute_led = LED_ON;ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led);- }
- return k_changed;
}
@@ -1066,6 +1107,7 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave)
pm_runtime_mark_last_busy(&slave->dev); pm_runtime_put_autosuspend(&slave->dev);
dmi_check_system(micmute_led_dmi_table);
return 0;
} diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c index 34c3357e943b..59d05b28f52e 100644 --- a/sound/soc/codecs/rt715.c +++ b/sound/soc/codecs/rt715.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/leds.h> #include <linux/pm_runtime.h> #include <linux/pm.h> #include <linux/soundwire/sdw.h> @@ -25,6 +26,7 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/of_device.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -70,6 +72,32 @@ static void rt715_get_gain(struct rt715_priv *rt715, unsigned int addr_h, pr_err("Failed to get L channel gain.\n"); }
+static bool micmute_led_set; +static int dmi_matched(const struct dmi_system_id *dmi) +{
- micmute_led_set = 1;
- return 1;
+}
+/* Some systems will need to use this to trigger mic mute LED state changed */ +static const struct dmi_system_id micmute_led_dmi_table[] = {
- {
.callback = dmi_matched,.matches = {DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),DMI_MATCH(DMI_PRODUCT_SKU, "0A32"),},- },
- {
.callback = dmi_matched,.matches = {DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"),},- },
- {},
+};
/* For Verb-Set Amplifier Gain (Verb ID = 3h) */ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -88,6 +116,7 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, RT715_SET_GAIN_MIX_ADC2_L}; unsigned int addr_h, addr_l, val_h, val_ll, val_lr; unsigned int read_ll, read_rl, i, j, loop_cnt;
bool micmute_led;
if (strstr(ucontrol->id.name, "Main Capture Switch") || strstr(ucontrol->id.name, "Main Capture Volume"))
@@ -185,6 +214,19 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol, if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) regmap_write(rt715->regmap, RT715_SET_AUDIO_POWER_STATE, AC_PWRST_D3);
- /* Micmute LED state changed by muted/unmute switch
* to keep syncing with actual hardware mic mute led state* invert will be checked to change the state switch*/- if (mc->invert && micmute_led_set) {
if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1])micmute_led = LED_OFF;elsemicmute_led = LED_ON;ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led);- }
- return 0;
}
@@ -901,6 +943,7 @@ int rt715_io_init(struct device *dev, struct sdw_slave *slave)
pm_runtime_mark_last_busy(&slave->dev); pm_runtime_put_autosuspend(&slave->dev);
dmi_check_system(micmute_led_dmi_table);
return 0;
}
participants (2)
-
Hans de Goede -
Perry Yuan