[PATCH 1/2] ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend
From: Derek Fang derek.fang@realtek.com
When the system suspends, the codec driver will set SAR to power saving mode if a headset is plugged in. There is a chance to generate an unexpected IRQ, and leads to issues after resuming such as noise from OMTP type headsets.
Signed-off-by: Derek Fang derek.fang@realtek.com --- sound/soc/codecs/rt5682.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 78b4cb5fb6c8..a486ac268c33 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -48,6 +48,7 @@ static const struct reg_sequence patch_list[] = { {RT5682_SAR_IL_CMD_6, 0x0110}, {RT5682_CHARGE_PUMP_1, 0x0210}, {RT5682_HP_LOGIC_CTRL_2, 0x0007}, + {RT5682_SAR_IL_CMD_2, 0xac00}, };
void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev) @@ -2943,9 +2944,6 @@ static int rt5682_suspend(struct snd_soc_component *component) cancel_delayed_work_sync(&rt5682->jack_detect_work); cancel_delayed_work_sync(&rt5682->jd_check_work); if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) { - snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, - RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK, - RT5682_CTRL_MB1_REG | RT5682_CTRL_MB2_REG); val = snd_soc_component_read(component, RT5682_CBJ_CTRL_2) & RT5682_JACK_TYPE_MASK;
@@ -2967,10 +2965,15 @@ static int rt5682_suspend(struct snd_soc_component *component) /* enter SAR ADC power saving mode */ snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1, RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | - RT5682_SAR_BUTDET_RST_MASK | RT5682_SAR_SEL_MB1_MB2_MASK, 0); + RT5682_SAR_SEL_MB1_MB2_MASK, 0); + usleep_range(5000, 6000); + snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, + RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK, + RT5682_CTRL_MB1_REG | RT5682_CTRL_MB2_REG); + usleep_range(10000, 12000); snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1, - RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_BUTDET_RST_MASK, - RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV | RT5682_SAR_BUTDET_RST_NORMAL); + RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK, + RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV); }
regcache_cache_only(rt5682->regmap, true);
From: Derek Fang derek.fang@realtek.com
Sometimes, end-users change the jack type under suspending, so it needs to re-detect the combo jack type after resuming to avoid any unexpected behaviors.
Signed-off-by: Derek Fang derek.fang@realtek.com --- sound/soc/codecs/rt5682-i2c.c | 1 + sound/soc/codecs/rt5682.c | 23 ++++++++++++++++++++--- sound/soc/codecs/rt5682.h | 1 + 3 files changed, 22 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/rt5682-i2c.c b/sound/soc/codecs/rt5682-i2c.c index a30e42932cf7..fdf7d4005760 100644 --- a/sound/soc/codecs/rt5682-i2c.c +++ b/sound/soc/codecs/rt5682-i2c.c @@ -198,6 +198,7 @@ static int rt5682_i2c_probe(struct i2c_client *i2c, }
mutex_init(&rt5682->calibrate_mutex); + mutex_init(&rt5682->jdet_mutex); rt5682_calibrate(rt5682);
rt5682_apply_patch_list(rt5682, &i2c->dev); diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index a486ac268c33..04cb747c2b12 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -49,6 +49,7 @@ static const struct reg_sequence patch_list[] = { {RT5682_CHARGE_PUMP_1, 0x0210}, {RT5682_HP_LOGIC_CTRL_2, 0x0007}, {RT5682_SAR_IL_CMD_2, 0xac00}, + {RT5682_CBJ_CTRL_7, 0x0104}, };
void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev) @@ -941,6 +942,10 @@ int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert) snd_soc_component_update_bits(component, RT5682_HP_CHARGE_PUMP_1, RT5682_OSW_L_MASK | RT5682_OSW_R_MASK, 0); + rt5682_enable_push_button_irq(component, false); + snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, + RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW); + usleep_range(55000, 60000); snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_HIGH);
@@ -1093,6 +1098,7 @@ void rt5682_jack_detect_handler(struct work_struct *work) while (!rt5682->component->card->instantiated) usleep_range(10000, 15000);
+ mutex_lock(&rt5682->jdet_mutex); mutex_lock(&rt5682->calibrate_mutex);
val = snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL) @@ -1166,6 +1172,7 @@ void rt5682_jack_detect_handler(struct work_struct *work) }
mutex_unlock(&rt5682->calibrate_mutex); + mutex_unlock(&rt5682->jdet_mutex); } EXPORT_SYMBOL_GPL(rt5682_jack_detect_handler);
@@ -1515,6 +1522,7 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w, { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
switch (event) { case SND_SOC_DAPM_PRE_PMU: @@ -1526,12 +1534,17 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w, RT5682_DEPOP_1, 0x60, 0x60); snd_soc_component_update_bits(component, RT5682_DAC_ADC_DIG_VOL1, 0x00c0, 0x0080); + + mutex_lock(&rt5682->jdet_mutex); + snd_soc_component_update_bits(component, RT5682_HP_CTRL_2, RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN, RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN); usleep_range(5000, 10000); snd_soc_component_update_bits(component, RT5682_CHARGE_PUMP_1, RT5682_CP_SW_SIZE_MASK, RT5682_CP_SW_SIZE_L); + + mutex_unlock(&rt5682->jdet_mutex); break;
case SND_SOC_DAPM_POST_PMD: @@ -2943,7 +2956,7 @@ static int rt5682_suspend(struct snd_soc_component *component)
cancel_delayed_work_sync(&rt5682->jack_detect_work); cancel_delayed_work_sync(&rt5682->jd_check_work); - if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) { + if (rt5682->hs_jack && (rt5682->jack_type & SND_JACK_HEADSET) == SND_JACK_HEADSET) { val = snd_soc_component_read(component, RT5682_CBJ_CTRL_2) & RT5682_JACK_TYPE_MASK;
@@ -2974,6 +2987,8 @@ static int rt5682_suspend(struct snd_soc_component *component) snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1, RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK, RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV); + snd_soc_component_update_bits(component, RT5682_HP_CHARGE_PUMP_1, + RT5682_OSW_L_MASK | RT5682_OSW_R_MASK, 0); }
regcache_cache_only(rt5682->regmap, true); @@ -2991,10 +3006,11 @@ static int rt5682_resume(struct snd_soc_component *component) regcache_cache_only(rt5682->regmap, false); regcache_sync(rt5682->regmap);
- if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) { + if (rt5682->hs_jack && (rt5682->jack_type & SND_JACK_HEADSET) == SND_JACK_HEADSET) { snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1, RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_SEL_MB1_MB2_MASK, RT5682_SAR_BUTDET_POW_NORM | RT5682_SAR_SEL_MB1_MB2_AUTO); + usleep_range(5000, 6000); snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK, RT5682_CTRL_MB1_FSM | RT5682_CTRL_MB2_FSM); @@ -3002,8 +3018,9 @@ static int rt5682_resume(struct snd_soc_component *component) RT5682_PWR_CBJ, RT5682_PWR_CBJ); }
+ rt5682->jack_type = 0; mod_delayed_work(system_power_efficient_wq, - &rt5682->jack_detect_work, msecs_to_jiffies(250)); + &rt5682->jack_detect_work, msecs_to_jiffies(0));
return 0; } diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h index d93829c35585..c917c76200ea 100644 --- a/sound/soc/codecs/rt5682.h +++ b/sound/soc/codecs/rt5682.h @@ -1463,6 +1463,7 @@ struct rt5682_priv {
int jack_type; int irq_work_delay_time; + struct mutex jdet_mutex; };
extern const char *rt5682_supply_names[RT5682_NUM_SUPPLIES];
On Tue, 9 Nov 2021 17:54:49 +0800, derek.fang@realtek.com wrote:
From: Derek Fang derek.fang@realtek.com
When the system suspends, the codec driver will set SAR to power saving mode if a headset is plugged in. There is a chance to generate an unexpected IRQ, and leads to issues after resuming such as noise from OMTP type headsets.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-linus
Thanks!
[1/2] ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend commit: a3774a2a6544a7a4a85186e768afc07044aa507f [2/2] ASoC: rt5682: Re-detect the combo jack after resuming commit: 2cd9b0ef82d936623d789bb3fbb6fcf52c500367
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
derek.fang＠realtek.com -
Mark Brown