Convert the STM32 SAI bindings to DT schema format using json-schema.

Signed-off-by: Olivier Moysan olivier.moysan@st.com --- .../bindings/sound/st,stm32-sai.txt | 107 ---------- .../bindings/sound/st,stm32-sai.yaml | 193 ++++++++++++++++++ 2 files changed, 193 insertions(+), 107 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt deleted file mode 100644 index 944743dd9212..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ /dev/null @@ -1,107 +0,0 @@ -STMicroelectronics STM32 Serial Audio Interface (SAI). - -The SAI interface (Serial Audio Interface) offers a wide set of audio protocols -as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. -The SAI contains two independent audio sub-blocks. Each sub-block has -its own clock generator and I/O lines controller. - -Required properties: - - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai" - - reg: Base address and size of SAI common register set. - - clocks: Must contain phandle and clock specifier pairs for each entry - in clock-names. - - clock-names: Must contain "pclk" "x8k" and "x11k" - "pclk": Clock which feeds the peripheral bus interface. - Mandatory for "st,stm32h7-sai" compatible. - Not used for "st,stm32f4-sai" compatible. - "x8k": SAI parent clock for sampling rates multiple of 8kHz. - "x11k": SAI parent clock for sampling rates multiple of 11.025kHz. - - interrupts: cpu DAI interrupt line shared by SAI sub-blocks - -Optional properties: - - resets: Reference to a reset controller asserting the SAI - -SAI subnodes: -Two subnodes corresponding to SAI sub-block instances A et B can be defined. -Subnode can be omitted for unsused sub-block. - -SAI subnodes required properties: - - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b" - for SAI sub-block A or B respectively. - - reg: Base address and size of SAI sub-block register set. - - clocks: Must contain one phandle and clock specifier pair - for sai_ck which feeds the internal clock generator. - If the SAI shares a master clock, with another SAI set as MCLK - clock provider, SAI provider phandle must be specified here. - - clock-names: Must contain "sai_ck". - Must also contain "MCLK", if SAI shares a master clock, - with a SAI set as MCLK clock provider. - - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt - - dma-names: identifier string for each DMA request line - "tx": if sai sub-block is configured as playback DAI - "rx": if sai sub-block is configured as capture DAI - - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml - -SAI subnodes Optional properties: - - st,sync: specify synchronization mode. - By default SAI sub-block is in asynchronous mode. - This property sets SAI sub-block as slave of another SAI sub-block. - Must contain the phandle and index of the sai sub-block providing - the synchronization. - - st,iec60958: support S/PDIF IEC6958 protocol for playback - IEC60958 protocol is not available for capture. - By default, custom protocol is assumed, meaning that protocol is - configured according to protocol defined in related DAI link node, - such as i2s, left justified, right justified, dsp and pdm protocols. - Note: ac97 protocol is not supported by SAI driver - - #clock-cells: should be 0. This property must be present if the SAI device - is a master clock provider, according to clocks bindings, described in - Documentation/devicetree/bindings/clock/clock-bindings.txt. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -graph.txt. - -Example: -sound_card { - compatible = "audio-graph-card"; - dais = <&sai1b_port>; -}; - -sai1: sai1@40015800 { - compatible = "st,stm32h7-sai"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x40015800 0x400>; - reg = <0x40015800 0x4>; - clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "pclk", "x8k", "x11k"; - interrupts = <87>; - - sai1a: audio-controller@40015804 { - compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1C>; - clocks = <&rcc SAI1_CK>; - clock-names = "sai_ck"; - dmas = <&dmamux1 1 87 0x400 0x0>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1a>; - - sai1b_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - format = "i2s"; - }; - }; - }; -}; - -audio-codec { - codec_port: port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml new file mode 100644 index 000000000000..33dca007fc86 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Serial Audio Interface (SAI) + +maintainers: + - Olivier Moysan olivier.moysan@st.com + +description: + The SAI interface (Serial Audio Interface) offers a wide set of audio + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. + The SAI contains two independent audio sub-blocks. Each sub-block has + its own clock generator and I/O lines controller. + +properties: + compatible: + enum: + - st,stm32f4-sai + - st,stm32h7-sai + + reg: + items: + - description: Base address and size of SAI common register set. + - description: Base address and size of SAI identification register set. + minItems: 1 + maxItems: 2 + + ranges: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + clocks: + items: + - description: pclk feeds the peripheral bus interface. + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. + + clock-names: + items: + enum: [ pclk, x8k, x11k ] + minItems: 3 + maxItems: 3 + +required: + - compatible + - reg + - ranges + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + +patternProperties: + "^audio-controller@[0-9a-f]+$": + type: object + description: + Two subnodes corresponding to SAI sub-block instances A et B + can be defined. Subnode can be omitted for unsused sub-block. + + properties: + compatible: + description: Compatible for SAI sub-block A or B. + enum: + - st,stm32-sai-sub-a + - st,stm32-sai-sub-b + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + items: + - description: sai_ck clock feeding the internal clock generator. + - description: MCLK clock from a SAI set as master clock provider. + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: sai_ck + - const: MCLK + minItems: 1 + maxItems: 2 + + dmas: + items: + - description: SAI sub-block is configured as a capture DAI. + - description: SAI sub-block is configured as a playback DAI. + minItems: 1 + maxItems: 1 + + dma-names: + items: + - enum: [ rx, tx ] + + st,sync: + description: + Configure the SAI sub-block as slave of another SAI sub-block. + By default SAI sub-block is in asynchronous mode. + Must contain the phandle and index of the SAI sub-block providing + the synchronization. + allOf: + - $ref: /schemas/types.yaml#definitions/phandle-array + - maxItems: 1 + + st,iec60958: + description: + If set, support S/PDIF IEC6958 protocol for playback. + IEC60958 protocol is not available for capture. + By default, custom protocol is assumed, meaning that protocol is + configured according to protocol defined in related DAI link node, + such as i2s, left justified, right justified, dsp and pdm protocols. + allOf: + - $ref: /schemas/types.yaml#definitions/flag + + "#clock-cells": + description: Configure the SAI device as master clock provider. + const: 0 + + required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - dmas + - dma-names + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-sai + + - then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + enum: [ x8k, x11k ] + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400a000 0x400>; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>; + clock-names = "pclk", "x8k", "x11k"; + resets = <&rcc SAI1_R>; + + sai1a: audio-controller@4400a004 { + compatible = "st,stm32-sai-sub-a"; + #sound-dai-cells = <0>; + reg = <0x4 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + dma-names = "tx"; + }; + }; + +...