[alsa-devel] [PATCH] ASoC: AMD: Configure master codec on all playback/capture cases
In the system design da7219 is the master codec and clocks are generated by it. Bclk is to be generated at the required rate for other codecs used when da7219 is acting only as clock master. For this call hw_params of da7219 during playback/capture on non da7219 codecs.
Being able to set bclk at lower rate also fixes noise issue observed on some dmics.
Signed-off-by: Akshu Agrawal akshu.agrawal@amd.com --- sound/soc/amd/acp-da7219-max98357a.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index a5daad973ce5..ad327415290a 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -45,6 +45,7 @@ #define CZ_PLAT_CLK 48000000 #define DUAL_CHANNEL 2
+static struct snd_soc_dai *codec_dai; static struct snd_soc_jack cz_jack; static struct clk *da7219_dai_clk; extern int bt_uart_enable; @@ -53,8 +54,10 @@ static int cz_da7219_init(struct snd_soc_pcm_runtime *rtd) { int ret; struct snd_soc_card *card = rtd->card; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_component *component = codec_dai->component; + struct snd_soc_component *component; + + codec_dai = rtd->codec_dai; + component = codec_dai->component;
dev_info(rtd->dev, "codec dai name = %s\n", codec_dai->name);
@@ -255,6 +258,16 @@ static void cz_dmic_shutdown(struct snd_pcm_substream *substream) da7219_clk_disable(); }
+static static int cz_da7219_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + /* da7219 Codec is clock master so setup as per the needs */ + if (codec_dai->driver->ops->hw_params) + return codec_dai->driver->ops->hw_params(substream, params, + codec_dai); + return 0; +} + static const struct snd_soc_ops cz_da7219_play_ops = { .startup = cz_da7219_play_startup, .shutdown = cz_da7219_shutdown, @@ -268,16 +281,19 @@ static const struct snd_soc_ops cz_da7219_cap_ops = { static const struct snd_soc_ops cz_max_play_ops = { .startup = cz_max_startup, .shutdown = cz_max_shutdown, + .hw_params = cz_da7219_hw_params, };
static const struct snd_soc_ops cz_dmic0_cap_ops = { .startup = cz_dmic0_startup, .shutdown = cz_dmic_shutdown, + .hw_params = cz_da7219_hw_params, };
static const struct snd_soc_ops cz_dmic1_cap_ops = { .startup = cz_dmic1_startup, .shutdown = cz_dmic_shutdown, + .hw_params = cz_da7219_hw_params, };
static struct snd_soc_dai_link cz_dai_7219_98357[] = {
On 15 February 2019 07:06, Akshu Agrawal wrote:
In the system design da7219 is the master codec and clocks are generated by it. Bclk is to be generated at the required rate for other codecs used when da7219 is acting only as clock master. For this call hw_params of da7219 during playback/capture on non da7219 codecs.
Being able to set bclk at lower rate also fixes noise issue observed on some dmics.
Signed-off-by: Akshu Agrawal akshu.agrawal@amd.com
Reviewed-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com
sound/soc/amd/acp-da7219-max98357a.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp- da7219-max98357a.c index a5daad973ce5..ad327415290a 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -45,6 +45,7 @@ #define CZ_PLAT_CLK 48000000 #define DUAL_CHANNEL 2
+static struct snd_soc_dai *codec_dai; static struct snd_soc_jack cz_jack; static struct clk *da7219_dai_clk; extern int bt_uart_enable; @@ -53,8 +54,10 @@ static int cz_da7219_init(struct snd_soc_pcm_runtime *rtd) { int ret; struct snd_soc_card *card = rtd->card;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_component *component = codec_dai->component;
struct snd_soc_component *component;
codec_dai = rtd->codec_dai;
component = codec_dai->component;
dev_info(rtd->dev, "codec dai name = %s\n", codec_dai->name);
@@ -255,6 +258,16 @@ static void cz_dmic_shutdown(struct snd_pcm_substream *substream) da7219_clk_disable(); }
+static static int cz_da7219_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params) {
- /* da7219 Codec is clock master so setup as per the needs */
- if (codec_dai->driver->ops->hw_params)
return codec_dai->driver->ops->hw_params(substream, params,
codec_dai);
- return 0;
+}
static const struct snd_soc_ops cz_da7219_play_ops = { .startup = cz_da7219_play_startup, .shutdown = cz_da7219_shutdown, @@ -268,16 +281,19 @@ static const struct snd_soc_ops cz_da7219_cap_ops = { static const struct snd_soc_ops cz_max_play_ops = { .startup = cz_max_startup, .shutdown = cz_max_shutdown,
- .hw_params = cz_da7219_hw_params,
};
static const struct snd_soc_ops cz_dmic0_cap_ops = { .startup = cz_dmic0_startup, .shutdown = cz_dmic_shutdown,
- .hw_params = cz_da7219_hw_params,
};
static const struct snd_soc_ops cz_dmic1_cap_ops = { .startup = cz_dmic1_startup, .shutdown = cz_dmic_shutdown,
- .hw_params = cz_da7219_hw_params,
};
static struct snd_soc_dai_link cz_dai_7219_98357[] = {
2.17.1
On Fri, Feb 15, 2019 at 07:06:15AM +0000, Agrawal, Akshu wrote:
+static static int cz_da7219_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
+{
- /* da7219 Codec is clock master so setup as per the needs */
- if (codec_dai->driver->ops->hw_params)
return codec_dai->driver->ops->hw_params(substream, params,
codec_dai);
- return 0;
+}
No, this is a bad idea - you shouldn't be callings ops in drivers outside of the framework, something is going to break on you there. Either the drivers or the frameworks are going to get surprised by things getting called out of sequence, for example I'd not rely on the fact that the CODEC would be outputing a clock without active audio. This probably means that you're going to have to extend the framework in some way, or refactor things so that the BCLK is exported as a clock by the CODEC and reflect the relationships via the clock API. I need to think a bit more but I think the clock API is going to be the the best solution.
I also suspect that some work is needed to propagate constraints between the various DAIs in the system.
On 8 February 2019 18:18, Mark Brown wrote:
On Fri, Feb 15, 2019 at 07:06:15AM +0000, Agrawal, Akshu wrote:
+static static int cz_da7219_hw_params(struct snd_pcm_substream
*substream,
struct snd_pcm_hw_params *params) {
- /* da7219 Codec is clock master so setup as per the needs */
- if (codec_dai->driver->ops->hw_params)
return codec_dai->driver->ops->hw_params(substream, params,
codec_dai);
- return 0;
+}
No, this is a bad idea - you shouldn't be callings ops in drivers outside of the framework, something is going to break on you there. Either the drivers or the frameworks are going to get surprised by things getting called out of sequence, for example I'd not rely on the fact that the CODEC would be outputing a clock without active audio. This probably means that you're going to have to extend the framework in some way, or refactor things so that the BCLK is exported as a clock by the CODEC and reflect the relationships via the clock API. I need to think a bit more but I think the clock API is going to be the the best solution.
I also suspect that some work is needed to propagate constraints between the various DAIs in the system.
So this was a suggestion from my side to avoid the scenario where the system starts, the DA7219 codec hasn't yet been used (hw_params() not been called), and one of the other audio devices is needed for playback/capture. The codec will be at a default DAI configuration rather than the configuration that's required. If the DA7219 codec had been used first then of course there's no problem and the system runs as expected from then on.
This AMD platform limits all DAIs to 48KHz, 2 channel so the configuration is fixed, as I understand it. DA7219 will output DAI clocks without data so there's no problem there. I initially suggested using 'soc_dai_hw_params()' but the function isn't a global symbol, probably intentionally, so for this more unusual config I felt the above approach might be an option. Absolutely understand your concerns though.
I considered the CCF approach but I'm not 100% confident that the clocking mechanism of the codec will fit ideally into that framework. There's already a clock gate for the DAI clocks, in the driver, but nothing more. The problem here is that the BCLK rate is intrinsically linked to the WCLK rate, as well as the word length, so changing the desired BCLK rate would affect the WCLK rate, and vice versa. I will take a look again, but if you have any suggestions then they'd be greatly received.
On Fri, Feb 15, 2019 at 07:06:15AM +0000, Agrawal, Akshu wrote:
In the system design da7219 is the master codec and clocks are generated by it. Bclk is to be generated at the required rate for other codecs used when da7219 is acting only as clock master. For this call hw_params of da7219 during playback/capture on non da7219 codecs.
Being able to set bclk at lower rate also fixes noise issue observed on some dmics.
Signed-off-by: Akshu Agrawal akshu.agrawal@amd.com Reviewed-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com
sound/soc/amd/acp-da7219-max98357a.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index a5daad973ce5..ad327415290a 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -45,6 +45,7 @@ #define CZ_PLAT_CLK 48000000 #define DUAL_CHANNEL 2
+static struct snd_soc_dai *codec_dai; static struct snd_soc_jack cz_jack; static struct clk *da7219_dai_clk; extern int bt_uart_enable; @@ -53,8 +54,10 @@ static int cz_da7219_init(struct snd_soc_pcm_runtime *rtd) { int ret; struct snd_soc_card *card = rtd->card;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_component *component = codec_dai->component;
struct snd_soc_component *component;
codec_dai = rtd->codec_dai;
component = codec_dai->component;
dev_info(rtd->dev, "codec dai name = %s\n", codec_dai->name);
@@ -255,6 +258,16 @@ static void cz_dmic_shutdown(struct snd_pcm_substream *substream) da7219_clk_disable(); }
+static static int cz_da7219_hw_params(struct snd_pcm_substream *substream,
s/static static/static/
gcc doesn't like the double static (at least neither gcc 6.5.0 nor 8.1.0 do), and it doesn't seem to be syntactically correct (even though, oddly enough, clang accepts it w/o error message).
Guenter
struct snd_pcm_hw_params *params)
+{
- /* da7219 Codec is clock master so setup as per the needs */
- if (codec_dai->driver->ops->hw_params)
return codec_dai->driver->ops->hw_params(substream, params,
codec_dai);
- return 0;
+}
static const struct snd_soc_ops cz_da7219_play_ops = { .startup = cz_da7219_play_startup, .shutdown = cz_da7219_shutdown, @@ -268,16 +281,19 @@ static const struct snd_soc_ops cz_da7219_cap_ops = { static const struct snd_soc_ops cz_max_play_ops = { .startup = cz_max_startup, .shutdown = cz_max_shutdown,
- .hw_params = cz_da7219_hw_params,
};
static const struct snd_soc_ops cz_dmic0_cap_ops = { .startup = cz_dmic0_startup, .shutdown = cz_dmic_shutdown,
- .hw_params = cz_da7219_hw_params,
};
static const struct snd_soc_ops cz_dmic1_cap_ops = { .startup = cz_dmic1_startup, .shutdown = cz_dmic_shutdown,
- .hw_params = cz_da7219_hw_params,
};
static struct snd_soc_dai_link cz_dai_7219_98357[] = {
participants (4)
-
Adam Thomson
-
Agrawal, Akshu
-
Guenter Roeck
-
Mark Brown