We're going to add another "does this register need syncing?" check, so rather than repeating it in three places, we'll separate all of the relevant logic into a helper function.

Signed-off-by: Kevin Cernekee cernekee@chromium.org --- drivers/base/regmap/regcache.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 7eb7b3b98794..c58493eaf050 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -249,6 +249,18 @@ int regcache_write(struct regmap *map, return 0; }

+static bool regcache_reg_needs_sync(struct regmap *map, unsigned int reg, + unsigned int val) +{ + int ret; + + /* Is this the hardware default? If so skip. */ + ret = regcache_lookup_reg(map, reg); + if (ret >= 0 && val == map->reg_defaults[ret].def) + return false; + return true; +} + static int regcache_default_sync(struct regmap *map, unsigned int min, unsigned int max) { @@ -266,9 +278,7 @@ static int regcache_default_sync(struct regmap *map, unsigned int min, if (ret) return ret;

- /* Is this the hardware default? If so skip. */ - ret = regcache_lookup_reg(map, reg); - if (ret >= 0 && val == map->reg_defaults[ret].def) + if (!regcache_reg_needs_sync(map, reg, val)) continue;

map->cache_bypass = 1; @@ -613,10 +623,7 @@ static int regcache_sync_block_single(struct regmap *map, void *block, continue;

val = regcache_get_val(map, block, i); - - /* Is this the hardware default? If so skip. */ - ret = regcache_lookup_reg(map, regtmp); - if (ret >= 0 && val == map->reg_defaults[ret].def) + if (!regcache_reg_needs_sync(map, regtmp, val)) continue;

map->cache_bypass = 1; @@ -688,10 +695,7 @@ static int regcache_sync_block_raw(struct regmap *map, void *block, }

val = regcache_get_val(map, block, i); - - /* Is this the hardware default? If so skip. */ - ret = regcache_lookup_reg(map, regtmp); - if (ret >= 0 && val == map->reg_defaults[ret].def) { + if (!regcache_reg_needs_sync(map, regtmp, val)) { ret = regcache_sync_block_raw_flush(map, &data, base, regtmp); if (ret != 0)

Existing regmap users call regcache_mark_dirty() as part of the suspend/resume sequence, to tell regcache that non-default values need to be resynced post-resume. Add an internal "no_sync_defaults" regmap flag to remember this state, so that regcache_sync() can differentiate between these two cases:

1) HW was reset, so any cache values that match map->reg_defaults can be safely skipped. On some chips there are a lot of registers in the reg_defaults list, so this optimization speeds things up quite a bit.

2) HW was not reset (maybe it was just clock-gated), so if we cached any writes, they should be sent to the hardware regardless of whether they match the HW default. Currently this will write out all values in the regcache, since we don't maintain per-register dirty bits.

Suggested-by: Mark Brown broonie@kernel.org Signed-off-by: Kevin Cernekee cernekee@chromium.org --- drivers/base/regmap/internal.h | 3 +++ drivers/base/regmap/regcache.c | 19 +++++++++++++++---- 2 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h index a13587b5c2be..b2b2849fc6d3 100644 --- a/drivers/base/regmap/internal.h +++ b/drivers/base/regmap/internal.h @@ -131,7 +131,10 @@ struct regmap { struct reg_default *reg_defaults; const void *reg_defaults_raw; void *cache; + /* if set, the cache contains newer data than the HW */ u32 cache_dirty; + /* if set, the HW registers are known to match map->reg_defaults */ + bool no_sync_defaults;

struct reg_default *patch; int patch_regs; diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index c58493eaf050..b9862d741a56 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -254,6 +254,10 @@ static bool regcache_reg_needs_sync(struct regmap *map, unsigned int reg, { int ret;

+ /* If we don't know the chip just got reset, then sync everything. */ + if (!map->no_sync_defaults) + return true; + /* Is this the hardware default? If so skip. */ ret = regcache_lookup_reg(map, reg); if (ret >= 0 && val == map->reg_defaults[ret].def) @@ -352,6 +356,7 @@ out: /* Restore the bypass state */ map->async = false; map->cache_bypass = bypass; + map->no_sync_defaults = false; map->unlock(map->lock_arg);

regmap_async_complete(map); @@ -407,6 +412,7 @@ out: /* Restore the bypass state */ map->cache_bypass = bypass; map->async = false; + map->no_sync_defaults = false; map->unlock(map->lock_arg);

regmap_async_complete(map); @@ -471,18 +477,23 @@ void regcache_cache_only(struct regmap *map, bool enable) EXPORT_SYMBOL_GPL(regcache_cache_only);

/** - * regcache_mark_dirty: Mark the register cache as dirty + * regcache_mark_dirty: Indicate that HW registers were reset to default values * * @map: map to mark * - * Mark the register cache as dirty, for example due to the device - * having been powered down for suspend. If the cache is not marked - * as dirty then the cache sync will be suppressed. + * Inform regcache that the device has been powered down or reset, so that + * on resume, regcache_sync() knows to write out all non-default values + * stored in the cache. + * + * If this function is not called, regcache_sync() will assume that + * the hardware state still matches the cache state, modulo any writes that + * happened when cache_only was true. */ void regcache_mark_dirty(struct regmap *map) { map->lock(map->lock_arg); map->cache_dirty = true; + map->no_sync_defaults = true; map->unlock(map->lock_arg); } EXPORT_SYMBOL_GPL(regcache_mark_dirty);

Document the bindings for the soon-to-be-added tas571x driver.

Signed-off-by: Kevin Cernekee cernekee@chromium.org --- .../devicetree/bindings/sound/tas571x.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas571x.txt

diff --git a/Documentation/devicetree/bindings/sound/tas571x.txt b/Documentation/devicetree/bindings/sound/tas571x.txt new file mode 100644 index 000000000000..0ac31d8d5ac4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas571x.txt @@ -0,0 +1,41 @@ +Texas Instruments TAS5711/TAS5717/TAS5719 stereo power amplifiers + +The codec is controlled through an I2C interface. It also has two other +signals that can be wired up to GPIOs: reset (strongly recommended), and +powerdown (optional). + +Required properties: + +- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719" +- reg: The I2C address of the device +- #sound-dai-cells: must be equal to 0 + +Optional properties: + +- reset-gpios: GPIO specifier for the TAS571x's active low reset line +- pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line +- clocks: clock phandle for the MCLK input +- clock-names: should be "mclk" +- AVDD-supply: regulator phandle for the AVDD supply (all chips) +- DVDD-supply: regulator phandle for the DVDD supply (all chips) +- HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719) +- PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719) +- PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719) +- PVDD_A-supply: regulator phandle for the PVDD_A supply (5711) +- PVDD_B-supply: regulator phandle for the PVDD_B supply (5711) +- PVDD_C-supply: regulator phandle for the PVDD_C supply (5711) +- PVDD_D-supply: regulator phandle for the PVDD_D supply (5711) + +Example: + + tas5717: audio-codec@2a { + compatible = "ti,tas5717"; + reg = <0x2a>; + #sound-dai-cells = <0>; + + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + + clocks = <&clk_core CLK_I2S>; + clock-names = "mclk"; + };

Introduce a new codec driver for the Texas Instruments TAS5711/TAS5717/TAS5719 power amplifier chips. These chips are typically used to take an I2S digital audio input and drive 10-20W into a pair of speakers.

Signed-off-by: Kevin Cernekee cernekee@chromium.org --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas571x.c | 515 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tas571x.h | 33 +++ 4 files changed, 555 insertions(+) create mode 100644 sound/soc/codecs/tas571x.c create mode 100644 sound/soc/codecs/tas571x.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 061c46587628..befff910d71a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -104,6 +104,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_TAS2552 if I2C select SND_SOC_TAS5086 if I2C + select SND_SOC_TAS571X if I2C select SND_SOC_TFA9879 if I2C select SND_SOC_TLV320AIC23_I2C if I2C select SND_SOC_TLV320AIC23_SPI if SPI_MASTER @@ -611,6 +612,10 @@ config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C

+config SND_SOC_TAS571X + tristate "Texas Instruments TAS5711/TAS5717/TAS5719 power amplifiers" + depends on I2C + config SND_SOC_TFA9879 tristate "NXP Semiconductors TFA9879 amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index abe2d7edf65c..3dcf5ac85e89 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -106,6 +106,7 @@ snd-soc-sta350-objs := sta350.o snd-soc-sta529-objs := sta529.o snd-soc-stac9766-objs := stac9766.o snd-soc-tas5086-objs := tas5086.o +snd-soc-tas571x-objs := tas571x.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o @@ -288,6 +289,7 @@ obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o +obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c new file mode 100644 index 000000000000..e724cc463e78 --- /dev/null +++ b/sound/soc/codecs/tas571x.c @@ -0,0 +1,515 @@ +/* + * TAS571x amplifier audio driver + * + * Copyright (C) 2015 Google, Inc. + * Copyright (c) 2013 Daniel Mack zonque@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/stddef.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include "tas571x.h" + +#define TAS571X_MAX_SUPPLIES 6 + +struct tas571x_chip { + const char *const *supply_names; + int num_supply_names; + const struct snd_kcontrol_new *controls; + int num_controls; + const struct regmap_config *regmap_config; + int vol_reg_size; +}; + +struct tas571x_private { + const struct tas571x_chip *chip; + struct regmap *regmap; + struct regulator_bulk_data supplies[TAS571X_MAX_SUPPLIES]; + struct clk *mclk; + unsigned int format; + struct gpio_desc *reset_gpio; + struct gpio_desc *pdn_gpio; + struct snd_soc_codec_driver codec_driver; +}; + +static int tas571x_register_size(struct tas571x_private *priv, unsigned int reg) +{ + switch (reg) { + case TAS571X_MVOL_REG: + case TAS571X_CH1_VOL_REG: + case TAS571X_CH2_VOL_REG: + return priv->chip->vol_reg_size; + default: + return 1; + } +} + +static int tas571x_reg_write(void *context, unsigned int reg, + unsigned int value) +{ + struct i2c_client *client = context; + struct tas571x_private *priv = i2c_get_clientdata(client); + unsigned int i, size; + uint8_t buf[5]; + int ret; + + size = tas571x_register_size(priv, reg); + buf[0] = reg; + + for (i = size; i >= 1; --i) { + buf[i] = value; + value >>= 8; + } + + ret = i2c_master_send(client, buf, size + 1); + if (ret == size + 1) + return 0; + else if (ret < 0) + return ret; + else + return -EIO; +} + +static int tas571x_reg_read(void *context, unsigned int reg, + unsigned int *value) +{ + struct i2c_client *client = context; + struct tas571x_private *priv = i2c_get_clientdata(client); + uint8_t send_buf, recv_buf[4]; + struct i2c_msg msgs[2]; + unsigned int size; + unsigned int i; + int ret; + + size = tas571x_register_size(priv, reg); + send_buf = reg; + + msgs[0].addr = client->addr; + msgs[0].len = sizeof(send_buf); + msgs[0].buf = &send_buf; + msgs[0].flags = 0; + + msgs[1].addr = client->addr; + msgs[1].len = size; + msgs[1].buf = recv_buf; + msgs[1].flags = I2C_M_RD; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + else if (ret != ARRAY_SIZE(msgs)) + return -EIO; + + *value = 0; + + for (i = 0; i < size; i++) { + *value <<= 8; + *value |= recv_buf[i]; + } + + return 0; +} + +static int tas571x_set_dai_fmt(struct snd_soc_dai *dai, unsigned int format) +{ + struct tas571x_private *priv = snd_soc_codec_get_drvdata(dai->codec); + + priv->format = format; + + return 0; +} + +static int tas571x_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct tas571x_private *priv = snd_soc_codec_get_drvdata(dai->codec); + u32 val; + + switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + val = 0x00; + break; + case SND_SOC_DAIFMT_I2S: + val = 0x03; + break; + case SND_SOC_DAIFMT_LEFT_J: + val = 0x06; + break; + default: + return -EINVAL; + } + + if (params_width(params) >= 24) + val += 2; + else if (params_width(params) >= 20) + val += 1; + + return regmap_update_bits(priv->regmap, TAS571X_SDI_REG, + TAS571X_SDI_FMT_MASK, val); +} + +static int tas571x_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct tas571x_private *priv = snd_soc_codec_get_drvdata(codec); + int ret; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + if (!IS_ERR(priv->mclk)) { + ret = clk_prepare_enable(priv->mclk); + if (ret) { + dev_err(codec->dev, + "Failed to enable master clock: %d\n", + ret); + return ret; + } + } + + gpiod_set_value(priv->pdn_gpio, 0); + usleep_range(5000, 6000); + + regcache_cache_only(priv->regmap, false); + ret = regcache_sync(priv->regmap); + if (ret) + return ret; + } + break; + case SND_SOC_BIAS_OFF: + regcache_cache_only(priv->regmap, true); + gpiod_set_value(priv->pdn_gpio, 1); + + if (!IS_ERR(priv->mclk)) + clk_disable_unprepare(priv->mclk); + break; + } + + codec->dapm.bias_level = level; + return 0; +} + +static const struct snd_soc_dai_ops tas571x_dai_ops = { + .set_fmt = tas571x_set_dai_fmt, + .hw_params = tas571x_hw_params, +}; + +static const char *const tas5711_supply_names[] = { + "AVDD", + "DVDD", + "PVDD_A", + "PVDD_B", + "PVDD_C", + "PVDD_D", +}; + +static const DECLARE_TLV_DB_SCALE(tas5711_volume_tlv, -10350, 50, 1); + +static const struct snd_kcontrol_new tas5711_controls[] = { + SOC_SINGLE_TLV("Master Volume", + TAS571X_MVOL_REG, + 0, 0xff, 1, tas5711_volume_tlv), + SOC_DOUBLE_R_TLV("Speaker Volume", + TAS571X_CH1_VOL_REG, + TAS571X_CH2_VOL_REG, + 0, 0xff, 1, tas5711_volume_tlv), + SOC_DOUBLE("Speaker Switch", + TAS571X_SOFT_MUTE_REG, + TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, + 1, 1), +}; + +static const struct reg_default tas5711_reg_defaults[] = { + { 0x04, 0x05 }, + { 0x05, 0x40 }, + { 0x06, 0x00 }, + { 0x07, 0xff }, + { 0x08, 0x30 }, + { 0x09, 0x30 }, + { 0x1b, 0x82 }, +}; + +static const struct regmap_config tas5711_regmap_config = { + .reg_bits = 8, + .val_bits = 32, + .max_register = 0xff, + .reg_read = tas571x_reg_read, + .reg_write = tas571x_reg_write, + .reg_defaults = tas5711_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas5711_reg_defaults), + .cache_type = REGCACHE_RBTREE, +}; + +static const struct tas571x_chip tas5711_chip = { + .supply_names = tas5711_supply_names, + .num_supply_names = ARRAY_SIZE(tas5711_supply_names), + .controls = tas5711_controls, + .num_controls = ARRAY_SIZE(tas5711_controls), + .regmap_config = &tas5711_regmap_config, + .vol_reg_size = 1, +}; + +static const char *const tas5717_supply_names[] = { + "AVDD", + "DVDD", + "HPVDD", + "PVDD_AB", + "PVDD_CD", +}; + +static const DECLARE_TLV_DB_SCALE(tas5717_volume_tlv, -10375, 25, 0); + +static const struct snd_kcontrol_new tas5717_controls[] = { + /* MVOL LSB is ignored - see comments in tas571x_i2c_probe() */ + SOC_SINGLE_TLV("Master Volume", + TAS571X_MVOL_REG, 1, 0x1ff, 1, + tas5717_volume_tlv), + SOC_DOUBLE_R_TLV("Speaker Volume", + TAS571X_CH1_VOL_REG, TAS571X_CH2_VOL_REG, + 1, 0x1ff, 1, tas5717_volume_tlv), + SOC_DOUBLE("Speaker Switch", + TAS571X_SOFT_MUTE_REG, + TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, + 1, 1), +}; + +static const struct reg_default tas5717_reg_defaults[] = { + { 0x04, 0x05 }, + { 0x05, 0x40 }, + { 0x06, 0x00 }, + { 0x07, 0x03ff }, + { 0x08, 0x00c0 }, + { 0x09, 0x00c0 }, + { 0x1b, 0x82 }, +}; + +static const struct regmap_config tas5717_regmap_config = { + .reg_bits = 8, + .val_bits = 32, + .max_register = 0xff, + .reg_read = tas571x_reg_read, + .reg_write = tas571x_reg_write, + .reg_defaults = tas5717_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas5717_reg_defaults), + .cache_type = REGCACHE_RBTREE, +}; + +/* This entry is reused for tas5719 as the software interface is identical. */ +static const struct tas571x_chip tas5717_chip = { + .supply_names = tas5717_supply_names, + .num_supply_names = ARRAY_SIZE(tas5717_supply_names), + .controls = tas5717_controls, + .num_controls = ARRAY_SIZE(tas5717_controls), + .regmap_config = &tas5717_regmap_config, + .vol_reg_size = 2, +}; + +static const struct snd_soc_dapm_widget tas571x_dapm_widgets[] = { + SND_SOC_DAPM_DAC("DACL", NULL, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC("DACR", NULL, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_OUTPUT("OUT_A"), + SND_SOC_DAPM_OUTPUT("OUT_B"), + SND_SOC_DAPM_OUTPUT("OUT_C"), + SND_SOC_DAPM_OUTPUT("OUT_D"), +}; + +static const struct snd_soc_dapm_route tas571x_dapm_routes[] = { + { "DACL", NULL, "Playback" }, + { "DACR", NULL, "Playback" }, + + { "OUT_A", NULL, "DACL" }, + { "OUT_B", NULL, "DACL" }, + { "OUT_C", NULL, "DACR" }, + { "OUT_D", NULL, "DACR" }, +}; + +static const struct snd_soc_codec_driver tas571x_codec = { + .set_bias_level = tas571x_set_bias_level, + .idle_bias_off = true, + + .dapm_widgets = tas571x_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas571x_dapm_widgets), + .dapm_routes = tas571x_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(tas571x_dapm_routes), +}; + +static struct snd_soc_dai_driver tas571x_dai = { + .name = "tas571x-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FMTBIT_S32_LE | + SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = &tas571x_dai_ops, +}; + +static const struct of_device_id tas571x_of_match[]; + +static int tas571x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tas571x_private *priv; + struct device *dev = &client->dev; + const struct of_device_id *of_id; + int i, ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + i2c_set_clientdata(client, priv); + + of_id = of_match_device(tas571x_of_match, dev); + if (!of_id) { + dev_err(dev, "Unknown device type\n"); + return -EINVAL; + } + priv->chip = of_id->data; + + priv->mclk = devm_clk_get(dev, "mclk"); + if (IS_ERR(priv->mclk) && PTR_ERR(priv->mclk) != -ENOENT) { + dev_err(dev, "Failed to request mclk: %ld\n", + PTR_ERR(priv->mclk)); + return PTR_ERR(priv->mclk); + } + + BUG_ON(priv->chip->num_supply_names > TAS571X_MAX_SUPPLIES); + for (i = 0; i < priv->chip->num_supply_names; i++) + priv->supplies[i].supply = priv->chip->supply_names[i]; + + ret = devm_regulator_bulk_get(dev, priv->chip->num_supply_names, + priv->supplies); + if (ret) { + dev_err(dev, "Failed to get supplies: %d\n", ret); + return ret; + } + ret = regulator_bulk_enable(priv->chip->num_supply_names, + priv->supplies); + if (ret) { + dev_err(dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + priv->regmap = devm_regmap_init(dev, NULL, client, + priv->chip->regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW); + if (IS_ERR(priv->pdn_gpio)) { + dev_err(dev, "error requesting pdn_gpio: %ld\n", + PTR_ERR(priv->pdn_gpio)); + return PTR_ERR(priv->pdn_gpio); + } + + priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset_gpio)) { + dev_err(dev, "error requesting reset_gpio: %ld\n", + PTR_ERR(priv->reset_gpio)); + return PTR_ERR(priv->reset_gpio); + } else if (priv->reset_gpio) { + /* pulse the active low reset line for ~100us */ + usleep_range(100, 200); + gpiod_set_value(priv->reset_gpio, 0); + usleep_range(12000, 20000); + } + + ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0); + if (ret) + return ret; + + ret = regmap_update_bits(priv->regmap, TAS571X_SYS_CTRL_2_REG, + TAS571X_SYS_CTRL_2_SDN_MASK, 0); + if (ret) + return ret; + + memcpy(&priv->codec_driver, &tas571x_codec, sizeof(priv->codec_driver)); + priv->codec_driver.controls = priv->chip->controls; + priv->codec_driver.num_controls = priv->chip->num_controls; + + if (priv->chip->vol_reg_size == 2) { + /* + * The master volume defaults to 0x3ff (mute), but we ignore + * (zero) the LSB because the hardware step size is 0.125 dB + * and TLV_DB_SCALE_ITEM has a resolution of 0.01 dB. + */ + ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0); + if (ret) + return ret; + } + + regcache_cache_only(priv->regmap, true); + gpiod_set_value(priv->pdn_gpio, 1); + + return snd_soc_register_codec(&client->dev, &priv->codec_driver, + &tas571x_dai, 1); +} + +static int tas571x_i2c_remove(struct i2c_client *client) +{ + struct tas571x_private *priv = i2c_get_clientdata(client); + + snd_soc_unregister_codec(&client->dev); + regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies); + + return 0; +} + +static const struct of_device_id tas571x_of_match[] = { + { .compatible = "ti,tas5711", .data = &tas5711_chip, }, + { .compatible = "ti,tas5717", .data = &tas5717_chip, }, + { .compatible = "ti,tas5719", .data = &tas5717_chip, }, + { } +}; +MODULE_DEVICE_TABLE(of, tas571x_of_match); + +static const struct i2c_device_id tas571x_i2c_id[] = { + { "tas5711", 0 }, + { "tas5717", 0 }, + { "tas5719", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas571x_i2c_id); + +static struct i2c_driver tas571x_i2c_driver = { + .driver = { + .name = "tas571x", + .of_match_table = of_match_ptr(tas571x_of_match), + }, + .probe = tas571x_i2c_probe, + .remove = tas571x_i2c_remove, + .id_table = tas571x_i2c_id, +}; +module_i2c_driver(tas571x_i2c_driver); + +MODULE_DESCRIPTION("ASoC TAS571x driver"); +MODULE_AUTHOR("Kevin Cernekee cernekee@chromium.org"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas571x.h b/sound/soc/codecs/tas571x.h new file mode 100644 index 000000000000..0aee471232cd --- /dev/null +++ b/sound/soc/codecs/tas571x.h @@ -0,0 +1,33 @@ +/* + * TAS571x amplifier audio driver + * + * Copyright (C) 2015 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _TAS571X_H +#define _TAS571X_H + +/* device registers */ +#define TAS571X_SDI_REG 0x04 +#define TAS571X_SDI_FMT_MASK 0x0f + +#define TAS571X_SYS_CTRL_2_REG 0x05 +#define TAS571X_SYS_CTRL_2_SDN_MASK 0x40 + +#define TAS571X_SOFT_MUTE_REG 0x06 +#define TAS571X_SOFT_MUTE_CH1_SHIFT 0 +#define TAS571X_SOFT_MUTE_CH2_SHIFT 1 +#define TAS571X_SOFT_MUTE_CH3_SHIFT 2 + +#define TAS571X_MVOL_REG 0x07 +#define TAS571X_CH1_VOL_REG 0x08 +#define TAS571X_CH2_VOL_REG 0x09 + +#define TAS571X_OSC_TRIM_REG 0x1b + +#endif /* _TAS571X_H */