[alsa-devel] [PATCH] ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping
When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST', an address of 'payload' argument is used for streaming DMA mapping by 'firewire_ohci' module if 'size' argument is larger than 8 byte. Although in this case the address should not be on kernel stack, current implementation of ALSA bebob driver uses data in kernel stack for a cue to boot M-Audio devices. This often brings unexpected result, especially for a case of CONFIG_VMAP_STACK=y.
This commit fixes the bug.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021 Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/5... Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series') Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp --- sound/firewire/bebob/bebob_maudio.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/sound/firewire/bebob/bebob_maudio.c b/sound/firewire/bebob/bebob_maudio.c index bd55620c6a47..0c5a4cbb99ba 100644 --- a/sound/firewire/bebob/bebob_maudio.c +++ b/sound/firewire/bebob/bebob_maudio.c @@ -96,17 +96,13 @@ int snd_bebob_maudio_load_firmware(struct fw_unit *unit) struct fw_device *device = fw_parent_device(unit); int err, rcode; u64 date; - __le32 cues[3] = { - cpu_to_le32(MAUDIO_BOOTLOADER_CUE1), - cpu_to_le32(MAUDIO_BOOTLOADER_CUE2), - cpu_to_le32(MAUDIO_BOOTLOADER_CUE3) - }; + __le32 *cues;
/* check date of software used to build */ err = snd_bebob_read_block(unit, INFO_OFFSET_SW_DATE, &date, sizeof(u64)); if (err < 0) - goto end; + return err; /* * firmware version 5058 or later has date later than "20070401", but * 'date' is not null-terminated. @@ -114,20 +110,28 @@ int snd_bebob_maudio_load_firmware(struct fw_unit *unit) if (date < 0x3230303730343031LL) { dev_err(&unit->device, "Use firmware version 5058 or later\n"); - err = -ENOSYS; - goto end; + return -ENXIO; }
+ cues = kmalloc_array(3, sizeof(*cues), GFP_KERNEL); + if (!cues) + return -ENOMEM; + + cues[0] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE1); + cues[1] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE2); + cues[2] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE3); + rcode = fw_run_transaction(device->card, TCODE_WRITE_BLOCK_REQUEST, device->node_id, device->generation, device->max_speed, BEBOB_ADDR_REG_REQ, - cues, sizeof(cues)); + cues, 3 * sizeof(*cues)); + kfree(cues); if (rcode != RCODE_COMPLETE) { dev_err(&unit->device, "Failed to send a cue to load firmware\n"); err = -EIO; } -end: + return err; }
On Sun, 09 Sep 2018 15:25:12 +0200, Takashi Sakamoto wrote:
When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST', an address of 'payload' argument is used for streaming DMA mapping by 'firewire_ohci' module if 'size' argument is larger than 8 byte. Although in this case the address should not be on kernel stack, current implementation of ALSA bebob driver uses data in kernel stack for a cue to boot M-Audio devices. This often brings unexpected result, especially for a case of CONFIG_VMAP_STACK=y.
This commit fixes the bug.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021 Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/5... Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series') Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp
Applied, thanks.
Takashi
participants (2)
-
Takashi Iwai
-
Takashi Sakamoto