In some cases it was not possible to follow the appropiate power ON/OFF sequence like in cases where the PGA needs to be enabled before the driver and disabled before the PGA for pop reduction.

Add a widget to support output driver (speaker, haptic, vibra, etc) drivers where power ON/OFF ordering is important.

Signed-off-by: Margarita Olaya Cabrera magi.olaya@ti.com --- include/sound/soc-dapm.h | 10 ++++++++++ sound/soc/soc-dapm.c | 6 ++++++ 2 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 041e98b..2f76a51 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -71,6 +71,10 @@ wcontrols, wncontrols) \ { .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols} +#define SND_SOC_DAPM_OUT_DRV(wname, wreg, wshift, winvert,\ + wcontrols, wncontrols) \ +{ .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MIXER(wname, wreg, wshift, winvert, \ wcontrols, wncontrols)\ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ @@ -115,6 +119,11 @@ { .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \ .event = wevent, .event_flags = wflags} +#define SND_SOC_DAPM_OUT_DRV_E(wname, wreg, wshift, winvert, wcontrols, \ + wncontrols, wevent, wflags) \ +{ .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \ + .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MIXER_E(wname, wreg, wshift, winvert, wcontrols, \ wncontrols, wevent, wflags) \ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ @@ -368,6 +377,7 @@ enum snd_soc_dapm_type { snd_soc_dapm_mixer, /* mixes several analog signals together */ snd_soc_dapm_mixer_named_ctl, /* mixer with named controls */ snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */ + snd_soc_dapm_out_drv, /* output driver */ snd_soc_dapm_adc, /* analog to digital converter */ snd_soc_dapm_dac, /* digital to analog converter */ snd_soc_dapm_micbias, /* microphone bias (power) */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 6a29d59..31e9681 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -62,6 +62,7 @@ static int dapm_up_seq[] = { [snd_soc_dapm_mixer_named_ctl] = 7, [snd_soc_dapm_pga] = 8, [snd_soc_dapm_adc] = 9, + [snd_soc_dapm_out_drv] = 10, [snd_soc_dapm_hp] = 10, [snd_soc_dapm_spk] = 10, [snd_soc_dapm_post] = 11, @@ -72,6 +73,7 @@ static int dapm_down_seq[] = { [snd_soc_dapm_adc] = 1, [snd_soc_dapm_hp] = 2, [snd_soc_dapm_spk] = 2, + [snd_soc_dapm_out_drv] = 2, [snd_soc_dapm_pga] = 4, [snd_soc_dapm_mixer_named_ctl] = 5, [snd_soc_dapm_mixer] = 5, @@ -231,6 +233,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w, break; /* does not effect routing - always connected */ case snd_soc_dapm_pga: + case snd_soc_dapm_out_drv: case snd_soc_dapm_output: case snd_soc_dapm_adc: case snd_soc_dapm_input: @@ -1243,6 +1246,7 @@ static ssize_t dapm_widget_show(struct device *dev, case snd_soc_dapm_dac: case snd_soc_dapm_adc: case snd_soc_dapm_pga: + case snd_soc_dapm_out_drv: case snd_soc_dapm_mixer: case snd_soc_dapm_mixer_named_ctl: case snd_soc_dapm_supply: @@ -1421,6 +1425,7 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm, case snd_soc_dapm_adc: case snd_soc_dapm_dac: case snd_soc_dapm_pga: + case snd_soc_dapm_out_drv: case snd_soc_dapm_input: case snd_soc_dapm_output: case snd_soc_dapm_micbias: @@ -1538,6 +1543,7 @@ int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm) w->power_check = dapm_dac_check_power; break; case snd_soc_dapm_pga: + case snd_soc_dapm_out_drv: w->power_check = dapm_generic_check_power; dapm_new_pga(dapm, w); break;