Hello!

I use the Creative E-MU 1616m PCIe:

03:04.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value Subsystem: Creative Labs Device 4007

I am on Linux kernel 3.2.4, -driver and -firmware from git; -utils from 1.0.24.2-5 (Debian amd_64).

I have manually applied the patch from [1] and initialized the device successfully:

[ 3.387211] snd_emu10k1 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.387341] ALSA emu10k1_main.c:823 emu1010: Special config. [ 3.387479] ALSA emu10k1_main.c:862 emu1010: EMU_HANA_ID = 0x3f [ 3.387530] ALSA emu10k1_main.c:881 emu1010: filename emu/emu1010b.fw testing [ 3.393206] ALSA emu10k1_main.c:686 firmware size = 0x11bdc [ 6.294376] ALSA emu10k1_main.c:898 emu1010: Hana Firmware loaded [ 6.294475] ALSA emu10k1_main.c:901 emu1010: Hana version: 1.6 [ 6.294583] ALSA emu10k1_main.c:906 emu1010: Card options = 0x8 [ 6.294656] ALSA emu10k1_main.c:908 emu1010: Card options = 0x8 [ 6.295222] ALSA emu10k1_main.c:947 emu1010: Card options3 = 0x8 [ 6.314806] ALSA emu10k1_main.c:227 Audigy2 value: Special config. [ 6.315231] ALSA emufx.c:1545 EMU outputs on [ 6.315280] ALSA emufx.c:1593 EMU2 inputs on

There are irregularities & limitations, but I do have 48kHz capture and playback.

I have two questions:

1.: I only use Dock ports, and I notice many irregularities in DAC and ADC assignment; so I wonder: should

/usr/local/lib/firmware/emu/micro_dock.fw

not also be loaded?

2.: I use JACK with

input: hw:0,2 (Mutichannel Capture/PT Playback) output: hw:0,3 (Multichannel Playback)

One thing that I would like to fix if at all possible: I can not assign anything to Dock Phones L/R; instead they always repeat Dock DAC 1L/R, no matter what I route there.

Is this a limitation of the firmware, or are the controls misleading me?

Kind regards & thanks in advance for any suggestions, Tilman.

[1] ALSA bugtracking system 0005250: E-MU 1010 PCI-Express not recognized https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5250