[PATCH v3 0/2] soundwire: sysfs: expose device number and status
This patchset combines three contributions:
Srinivas Kandagalta suggested creating a device even it's detected on the bus but not described in platform firmware. I suggested adding the device number and status to show the difference with 'ghost' devices, described in firmware but not physically present. Vinod suggested a simpler way to report the status.
I did not keep Vinod's patch separate since it was using the same group attribute as the other properties, which prevents status and device number from being reported if there is no firmware and no driver.
These patches were tested on Qualcomm and Intel platforms.
v3: add Co-developed-by tags and move 'status' and 'device_number' to device level instead of a dev-status directory.
v2: as suggested by GregKH, add attribute group by default by setting the groups pointer at the device level.
Pierre-Louis Bossart (1): soundwire: sysfs: add slave status and device number before probe
Srinivas Kandagatla (1): soundwire: bus: add enumerated Slave device to device list
.../ABI/testing/sysfs-bus-soundwire-slave | 18 ++++++ drivers/soundwire/bus.c | 9 +++ drivers/soundwire/bus.h | 2 + drivers/soundwire/bus_type.c | 9 +++ drivers/soundwire/slave.c | 6 +- drivers/soundwire/sysfs_local.h | 4 ++ drivers/soundwire/sysfs_slave.c | 58 ++++++++++++++++++- 7 files changed, 103 insertions(+), 3 deletions(-)
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
Currently Slave devices are only added on startup, either from Device Tree or ACPI entries. However Slave devices that are physically present on the bus, but not described in platform firmware, will never be added to the device list. The user/integrator can only know the list of devices by looking a dynamic debug logs.
This patch suggests adding a Slave device even if there is no matching DT or ACPI entry, so that we can see this in sysfs entry.
Initial code from Srinivas. Comments, fixes for ACPI probe and edits of commit message by Pierre.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Co-developed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- drivers/soundwire/bus.c | 9 +++++++++ drivers/soundwire/bus.h | 2 ++ drivers/soundwire/bus_type.c | 9 +++++++++ drivers/soundwire/slave.c | 4 ++-- 4 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index e3fe53f38708..f4c7887c3234 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -747,6 +747,15 @@ static int sdw_program_device_num(struct sdw_bus *bus)
if (!found) { /* TODO: Park this device in Group 13 */ + + /* + * add Slave device even if there is no platform + * firmware description. There will be no driver probe + * but the user/integration will be able to see the + * device, enumeration status and device number in sysfs + */ + sdw_slave_add(bus, &id, NULL); + dev_err(bus->dev, "Slave Entry not found\n"); }
diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index e0703991aad9..2e049d39c6e5 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -19,6 +19,8 @@ static inline int sdw_acpi_find_slaves(struct sdw_bus *bus) int sdw_of_find_slaves(struct sdw_bus *bus); void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id); +int sdw_slave_add(struct sdw_bus *bus, struct sdw_slave_id *id, + struct fwnode_handle *fwnode); int sdw_master_device_add(struct sdw_bus *bus, struct device *parent, struct fwnode_handle *fwnode); int sdw_master_device_del(struct sdw_bus *bus); diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c index 6fba55898cf0..575b9bad99d5 100644 --- a/drivers/soundwire/bus_type.c +++ b/drivers/soundwire/bus_type.c @@ -84,6 +84,15 @@ static int sdw_drv_probe(struct device *dev) const struct sdw_device_id *id; int ret;
+ /* + * fw description is mandatory to bind + */ + if (!dev->fwnode) + return -ENODEV; + + if (!IS_ENABLED(CONFIG_ACPI) && !dev->of_node) + return -ENODEV; + id = sdw_get_device_id(slave, drv); if (!id) return -ENODEV; diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c index 4a250d33de5d..19b012310c29 100644 --- a/drivers/soundwire/slave.c +++ b/drivers/soundwire/slave.c @@ -20,8 +20,8 @@ struct device_type sdw_slave_type = { .uevent = sdw_slave_uevent, };
-static int sdw_slave_add(struct sdw_bus *bus, - struct sdw_slave_id *id, struct fwnode_handle *fwnode) +int sdw_slave_add(struct sdw_bus *bus, + struct sdw_slave_id *id, struct fwnode_handle *fwnode) { struct sdw_slave *slave; int ret;
The MIPI DisCo device properties that are read by the driver from platform firmware, or hard-coded in the driver, should only be provided as sysfs entries when a driver probes successfully.
However the device status and device number is updated even when there is no driver present, and hence can be updated when a Slave device is detected on the bus without being described in platform firmware and without any driver registered/probed.
As suggested by GregKH, the attribute group for Slave status and device number is is added by default upon device registration.
Credits to Vinod Koul for the status_show() function, shared in a separate patch and used as is here. The status table was modified to remove an unnecessary enum and status_show() is handled in a different group attribute than what was suggested by Vinod.
Tested-by: Srinivas Kandgatla srinivas.kandagatla@linaro.org Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Co-developed-by: Vinod Koul vkoul@kernel.org Signed-off-by: Vinod Koul vkoul@kernel.org --- .../ABI/testing/sysfs-bus-soundwire-slave | 18 ++++++ drivers/soundwire/slave.c | 2 + drivers/soundwire/sysfs_local.h | 4 ++ drivers/soundwire/sysfs_slave.c | 58 ++++++++++++++++++- 4 files changed, 81 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-slave b/Documentation/ABI/testing/sysfs-bus-soundwire-slave index db4c9511d1aa..d324aa0b678f 100644 --- a/Documentation/ABI/testing/sysfs-bus-soundwire-slave +++ b/Documentation/ABI/testing/sysfs-bus-soundwire-slave @@ -1,3 +1,21 @@ +What: /sys/bus/soundwire/devices/sdw:.../status + /sys/bus/soundwire/devices/sdw:.../device_number + +Date: September 2020 + +Contact: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com + Bard Liao yung-chuan.liao@linux.intel.com + Vinod Koul vkoul@kernel.org + +Description: SoundWire Slave status + + These properties report the Slave status, e.g. if it + is UNATTACHED or not, and in the latter case show the + device_number. This status information is useful to + detect devices exposed by platform firmware but not + physically present on the bus, and conversely devices + not exposed in platform firmware but enumerated. + What: /sys/bus/soundwire/devices/sdw:.../dev-properties/mipi_revision /sys/bus/soundwire/devices/sdw:.../dev-properties/wake_capable /sys/bus/soundwire/devices/sdw:.../dev-properties/test_mode_capable diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c index 19b012310c29..a08f4081c1c4 100644 --- a/drivers/soundwire/slave.c +++ b/drivers/soundwire/slave.c @@ -6,6 +6,7 @@ #include <linux/soundwire/sdw.h> #include <linux/soundwire/sdw_type.h> #include "bus.h" +#include "sysfs_local.h"
static void sdw_slave_release(struct device *dev) { @@ -51,6 +52,7 @@ int sdw_slave_add(struct sdw_bus *bus, slave->dev.bus = &sdw_bus_type; slave->dev.of_node = of_node_get(to_of_node(fwnode)); slave->dev.type = &sdw_slave_type; + slave->dev.groups = sdw_slave_status_attr_groups; slave->bus = bus; slave->status = SDW_SLAVE_UNATTACHED; init_completion(&slave->enumeration_complete); diff --git a/drivers/soundwire/sysfs_local.h b/drivers/soundwire/sysfs_local.h index ff60adee3c41..7268bc24c538 100644 --- a/drivers/soundwire/sysfs_local.h +++ b/drivers/soundwire/sysfs_local.h @@ -8,6 +8,10 @@ * SDW sysfs APIs - */
+/* basic attributes to report status of Slave (attachment, dev_num) */ +extern const struct attribute_group *sdw_slave_status_attr_groups[]; + +/* additional device-managed properties reported after driver probe */ int sdw_slave_sysfs_init(struct sdw_slave *slave); int sdw_slave_sysfs_dpn_init(struct sdw_slave *slave);
diff --git a/drivers/soundwire/sysfs_slave.c b/drivers/soundwire/sysfs_slave.c index f510071b0add..b48b6617a396 100644 --- a/drivers/soundwire/sysfs_slave.c +++ b/drivers/soundwire/sysfs_slave.c @@ -16,9 +16,13 @@
/* * The sysfs for Slave reflects the MIPI description as given - * in the MIPI DisCo spec + * in the MIPI DisCo spec. + * status and device_number come directly from the MIPI SoundWire + * 1.x specification. * * Base file is device + * |---- status + * |---- device_number * |---- modalias * |---- dev-properties * |---- mipi_revision @@ -212,3 +216,55 @@ int sdw_slave_sysfs_init(struct sdw_slave *slave)
return 0; } + +/* + * the status is shown in capital letters for UNATTACHED and RESERVED + * on purpose, to highligh users to the fact that these status values + * are not expected. + */ +static const char *const slave_status[] = { + [SDW_SLAVE_UNATTACHED] = "UNATTACHED", + [SDW_SLAVE_ATTACHED] = "Attached", + [SDW_SLAVE_ALERT] = "Alert", + [SDW_SLAVE_RESERVED] = "RESERVED", +}; + +static ssize_t status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + + return sprintf(buf, "%s\n", slave_status[slave->status]); +} +static DEVICE_ATTR_RO(status); + +static ssize_t device_number_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + + if (slave->status == SDW_SLAVE_UNATTACHED) + return sprintf(buf, "%s", "N/A"); + else + return sprintf(buf, "%d", slave->dev_num); +} +static DEVICE_ATTR_RO(device_number); + +static struct attribute *slave_status_attrs[] = { + &dev_attr_status.attr, + &dev_attr_device_number.attr, + NULL, +}; + +/* + * we don't use ATTRIBUTES_GROUP here since the group is used in a + * separate file and can't be handled as a static. + */ +static const struct attribute_group sdw_slave_status_attr_group = { + .attrs = slave_status_attrs, +}; + +const struct attribute_group *sdw_slave_status_attr_groups[] = { + &sdw_slave_status_attr_group, + NULL +};
On Thu, Sep 24, 2020 at 02:44:30PM -0500, Pierre-Louis Bossart wrote:
The MIPI DisCo device properties that are read by the driver from platform firmware, or hard-coded in the driver, should only be provided as sysfs entries when a driver probes successfully.
However the device status and device number is updated even when there is no driver present, and hence can be updated when a Slave device is detected on the bus without being described in platform firmware and without any driver registered/probed.
As suggested by GregKH, the attribute group for Slave status and device number is is added by default upon device registration.
Credits to Vinod Koul for the status_show() function, shared in a separate patch and used as is here. The status table was modified to remove an unnecessary enum and status_show() is handled in a different group attribute than what was suggested by Vinod.
Tested-by: Srinivas Kandgatla srinivas.kandagatla@linaro.org Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Co-developed-by: Vinod Koul vkoul@kernel.org Signed-off-by: Vinod Koul vkoul@kernel.org
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
On 24-09-20, 14:44, Pierre-Louis Bossart wrote:
This patchset combines three contributions:
Srinivas Kandagalta suggested creating a device even it's detected on the bus but not described in platform firmware. I suggested adding the device number and status to show the difference with 'ghost' devices, described in firmware but not physically present. Vinod suggested a simpler way to report the status.
I did not keep Vinod's patch separate since it was using the same group attribute as the other properties, which prevents status and device number from being reported if there is no firmware and no driver.
These patches were tested on Qualcomm and Intel platforms.
Applied, thanks
participants (3)
-
Greg KH -
Pierre-Louis Bossart -
Vinod Koul