[PATCH v1 1/5] ASoC: codecs: ES8326: Add es8326_mute function
The internal analog power and hp Vref of es8326 should always be on to reduce pop noise. The HP_VOL and HP_CAL are moved to es8326_mute function so they are turned on at last and turned off at first.
Also, the calibration should be done manually once during start-up to reduce DC offset on headphone.
Signed-off-by: Zhu Ning zhuning0077@gmail.com --- sound/soc/codecs/es8326.c | 75 ++++++++++++++++----------------------- sound/soc/codecs/es8326.h | 9 +++-- 2 files changed, 37 insertions(+), 47 deletions(-)
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index ed348bbf5f49..191579d9552c 100644 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -38,6 +38,9 @@ struct es8326_priv { u8 interrupt_clk; bool jd_inverted; unsigned int sysclk; + + bool calibrated; + int version; };
static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(dac_vol_tlv, -9550, 50, 0); @@ -121,33 +124,12 @@ static const struct snd_soc_dapm_widget es8326_dapm_widgets[] = { /* Analog Power Supply*/ SND_SOC_DAPM_DAC("Right DAC", NULL, ES8326_ANA_PDN, 0, 1), SND_SOC_DAPM_DAC("Left DAC", NULL, ES8326_ANA_PDN, 1, 1), - SND_SOC_DAPM_SUPPLY("Analog Power", ES8326_ANA_PDN, 7, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("IBias Power", ES8326_ANA_PDN, 6, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("ADC Vref", ES8326_ANA_PDN, 5, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("DAC Vref", ES8326_ANA_PDN, 4, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("Vref Power", ES8326_ANA_PDN, 3, 1, NULL, 0), SND_SOC_DAPM_SUPPLY("MICBIAS1", ES8326_ANA_MICBIAS, 2, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("MICBIAS2", ES8326_ANA_MICBIAS, 3, 0, NULL, 0),
SND_SOC_DAPM_PGA("LHPMIX", ES8326_DAC2HPMIX, 7, 0, NULL, 0), SND_SOC_DAPM_PGA("RHPMIX", ES8326_DAC2HPMIX, 3, 0, NULL, 0),
- /* Headphone Charge Pump and Output */ - SND_SOC_DAPM_SUPPLY("HPOR Cal", ES8326_HP_CAL, 7, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("HPOL Cal", ES8326_HP_CAL, 3, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("Headphone Charge Pump", ES8326_HP_DRIVER, - 3, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("Headphone Driver Bias", ES8326_HP_DRIVER, - 2, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("Headphone LDO", ES8326_HP_DRIVER, - 1, 1, NULL, 0), - SND_SOC_DAPM_SUPPLY("Headphone Reference", ES8326_HP_DRIVER, - 0, 1, NULL, 0), - SND_SOC_DAPM_REG(snd_soc_dapm_supply, "HPOR Supply", ES8326_HP_CAL, - ES8326_HPOR_SHIFT, 7, 7, 0), - SND_SOC_DAPM_REG(snd_soc_dapm_supply, "HPOL Supply", ES8326_HP_CAL, - 0, 7, 7, 0), - SND_SOC_DAPM_OUTPUT("HPOL"), SND_SOC_DAPM_OUTPUT("HPOR"), }; @@ -166,34 +148,12 @@ static const struct snd_soc_dapm_route es8326_dapm_routes[] = { {"I2S OUT", NULL, "ADC L"}, {"I2S OUT", NULL, "ADC R"},
- {"I2S OUT", NULL, "Analog Power"}, - {"I2S OUT", NULL, "ADC Vref"}, - {"I2S OUT", NULL, "Vref Power"}, - {"I2S OUT", NULL, "IBias Power"}, - {"I2S IN", NULL, "Analog Power"}, - {"I2S IN", NULL, "DAC Vref"}, - {"I2S IN", NULL, "Vref Power"}, - {"I2S IN", NULL, "IBias Power"}, - {"Right DAC", NULL, "I2S IN"}, {"Left DAC", NULL, "I2S IN"},
{"LHPMIX", NULL, "Left DAC"}, {"RHPMIX", NULL, "Right DAC"},
- {"HPOR", NULL, "HPOR Cal"}, - {"HPOL", NULL, "HPOL Cal"}, - {"HPOR", NULL, "HPOR Supply"}, - {"HPOL", NULL, "HPOL Supply"}, - {"HPOL", NULL, "Headphone Charge Pump"}, - {"HPOR", NULL, "Headphone Charge Pump"}, - {"HPOL", NULL, "Headphone Driver Bias"}, - {"HPOR", NULL, "Headphone Driver Bias"}, - {"HPOL", NULL, "Headphone LDO"}, - {"HPOR", NULL, "Headphone LDO"}, - {"HPOL", NULL, "Headphone Reference"}, - {"HPOR", NULL, "Headphone Reference"}, - {"HPOL", NULL, "LHPMIX"}, {"HPOR", NULL, "RHPMIX"}, }; @@ -419,6 +379,31 @@ static int es8326_pcm_hw_params(struct snd_pcm_substream *substream, return 0; }
+static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction) +{ + struct snd_soc_component *component = dai->component; + struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component); + + if (mute) { + regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_OFF); + regmap_update_bits(es8326->regmap, ES8326_DAC_MUTE, + ES8326_MUTE_MASK, ES8326_MUTE); + regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xf0); + } else { + if (!es8326->calibrated) { + regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_FORCE_CAL); + msleep(30); + es8326->calibrated = true; + } + regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa0); + regmap_write(es8326->regmap, ES8326_HP_VOL, 0x00); + regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_ON); + regmap_update_bits(es8326->regmap, ES8326_DAC_MUTE, + ES8326_MUTE_MASK, ~(ES8326_MUTE)); + } + return 0; +} + static int es8326_set_bias_level(struct snd_soc_component *codec, enum snd_soc_bias_level level) { @@ -469,6 +454,8 @@ static const struct snd_soc_dai_ops es8326_ops = { .hw_params = es8326_pcm_hw_params, .set_fmt = es8326_set_dai_fmt, .set_sysclk = es8326_set_dai_sysclk, + .mute_stream = es8326_mute, + .no_capture_mute = 1, };
static struct snd_soc_dai_driver es8326_dai = { @@ -691,7 +678,7 @@ static int es8326_suspend(struct snd_soc_component *component)
cancel_delayed_work_sync(&es8326->jack_detect_work); es8326_disable_micbias(component); - + es8326->calibrated = false; regmap_write(es8326->regmap, ES8326_CLK_CTL, ES8326_CLK_OFF); regcache_cache_only(es8326->regmap, true); regcache_mark_dirty(es8326->regmap); diff --git a/sound/soc/codecs/es8326.h b/sound/soc/codecs/es8326.h index 8e5ffe5ee10d..3f8f7da58062 100644 --- a/sound/soc/codecs/es8326.h +++ b/sound/soc/codecs/es8326.h @@ -9,8 +9,6 @@ #ifndef _ES8326_H #define _ES8326_H
-#define CONFIG_HHTECH_MINIPMP 1 - /* ES8326 register space */ #define ES8326_RESET 0x00 #define ES8326_CLK_CTL 0x01 @@ -94,6 +92,8 @@ #define ES8326_PWRUP_SEQ_EN (1 << 5) #define ES8326_CODEC_RESET (0x0f << 0) #define ES8326_CSM_OFF (0 << 7) +#define ES8326_MUTE_MASK (3 << 0) +#define ES8326_MUTE (3 << 0)
/* ES8326_CLK_CTL */ #define ES8326_CLK_ON (0x7f << 0) @@ -122,7 +122,9 @@ #define ES8326_MIC2_SEL (1 << 5)
/* ES8326_HP_CAL */ -#define ES8326_HPOR_SHIFT 4 +#define ES8326_HP_OFF 0 +#define ES8326_HP_FORCE_CAL ((1 << 7) | (1 << 3)) +#define ES8326_HP_ON ((7 << 4) | (7 << 0))
/* ES8326_ADC1_SRC */ #define ES8326_ADC1_SHIFT 0 @@ -180,3 +182,4 @@ #define ES8326_VERSION_B (1 << 0)
#endif +
The old register naming method is confusing. The reg 0x57 decides the default headset hardware connection type, and the reg 0xfb is the headset detection status register, which changes during headset insertion. Change the name to ES8326_HPDET_TYPE and ES8326_HPDET_STA.
Signed-off-by: Zhu Ning zhuning0077@gmail.com --- sound/soc/codecs/es8326.c | 29 +++++++++++++++++------------ sound/soc/codecs/es8326.h | 12 ++++++++---- 2 files changed, 25 insertions(+), 16 deletions(-)
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index 191579d9552c..8c78f0bf514b 100644 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -158,20 +158,25 @@ static const struct snd_soc_dapm_route es8326_dapm_routes[] = { {"HPOR", NULL, "RHPMIX"}, };
-static const struct regmap_range es8326_volatile_ranges[] = { - regmap_reg_range(ES8326_HP_DETECT, ES8326_HP_DETECT), -}; - -static const struct regmap_access_table es8326_volatile_table = { - .yes_ranges = es8326_volatile_ranges, - .n_yes_ranges = ARRAY_SIZE(es8326_volatile_ranges), -}; +static bool es8326_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ES8326_HPL_OFFSET_INI: + case ES8326_HPR_OFFSET_INI: + case ES8326_HPDET_STA: + case ES8326_CTIA_OMTP_STA: + case ES8326_CSM_MUTE_STA: + return true; + default: + return false; + } +}
static const struct regmap_config es8326_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = 0xff, - .volatile_table = &es8326_volatile_table, + .volatile_reg = es8326_volatile_register, .cache_type = REGCACHE_RBTREE, };
@@ -519,7 +524,7 @@ static void es8326_jack_button_handler(struct work_struct *work) return;
mutex_lock(&es8326->lock); - iface = snd_soc_component_read(comp, ES8326_HP_DETECT); + iface = snd_soc_component_read(comp, ES8326_HPDET_STA); switch (iface) { case 0x93: /* pause button detected */ @@ -578,7 +583,7 @@ static void es8326_jack_detect_handler(struct work_struct *work) unsigned int iface;
mutex_lock(&es8326->lock); - iface = snd_soc_component_read(comp, ES8326_HP_DETECT); + iface = snd_soc_component_read(comp, ES8326_HPDET_STA); dev_dbg(comp->dev, "gpio flag %#04x", iface); if ((iface & ES8326_HPINSERT_FLAG) == 0) { /* Jack unplugged or spurious IRQ */ @@ -743,7 +748,7 @@ static void es8326_enable_jack_detect(struct snd_soc_component *component,
mutex_lock(&es8326->lock); if (es8326->jd_inverted) - snd_soc_component_update_bits(component, ES8326_HP_DET, + snd_soc_component_update_bits(component, ES8326_HPDET_TYPE, ES8326_HP_DET_JACK_POL, ~es8326->jack_pol); es8326->jack = jack;
diff --git a/sound/soc/codecs/es8326.h b/sound/soc/codecs/es8326.h index 3f8f7da58062..6cb8e3ed76e3 100644 --- a/sound/soc/codecs/es8326.h +++ b/sound/soc/codecs/es8326.h @@ -73,15 +73,19 @@ #define ES8326_DRC_RECOVERY 0x53 #define ES8326_DRC_WINSIZE 0x54 #define ES8326_HPJACK_TIMER 0x56 -#define ES8326_HP_DET 0x57 +#define ES8326_HPDET_TYPE 0x57 #define ES8326_INT_SOURCE 0x58 #define ES8326_INTOUT_IO 0x59 #define ES8326_SDINOUT1_IO 0x5A #define ES8326_SDINOUT23_IO 0x5B #define ES8326_JACK_PULSE 0x5C
+#define ES8326_HP_MISC 0xF7 +#define ES8326_CTIA_OMTP_STA 0xF8 #define ES8326_PULLUP_CTL 0xF9 -#define ES8326_HP_DETECT 0xFB +#define ES8326_CSM_I2C_STA 0xFA +#define ES8326_HPDET_STA 0xFB +#define ES8326_CSM_MUTE_STA 0xFC #define ES8326_CHIP_ID1 0xFD #define ES8326_CHIP_ID2 0xFE #define ES8326_CHIP_VERSION 0xFF @@ -146,7 +150,7 @@ #define ES8326_ADC3_SHIFT 0 #define ES8326_ADC4_SHIFT 3
-/* ES8326_HP_DET */ +/* ES8326_HPDET_TYPE */ #define ES8326_HP_DET_SRC_PIN27 (1 << 5) #define ES8326_HP_DET_SRC_PIN9 (1 << 4) #define ES8326_HP_DET_JACK_POL (1 << 3) @@ -174,7 +178,7 @@ #define ES8326_SDINOUT2_SHIFT 4 #define ES8326_SDINOUT3_SHIFT 0
-/* ES8326_HP_DETECT */ +/* ES8326_HPDET_STA */ #define ES8326_HPINSERT_FLAG (1 << 1) #define ES8326_HPBUTTON_FLAG (1 << 0)
On Fri, Jul 14, 2023 at 11:24:50AM +0800, Zhu Ning wrote:
-static const struct regmap_range es8326_volatile_ranges[] = {
- regmap_reg_range(ES8326_HP_DETECT, ES8326_HP_DETECT),
-};
-static const struct regmap_access_table es8326_volatile_table = {
- .yes_ranges = es8326_volatile_ranges,
- .n_yes_ranges = ARRAY_SIZE(es8326_volatile_ranges),
-}; +static bool es8326_volatile_register(struct device *dev, unsigned int reg) +{
- switch (reg) {
- case ES8326_HPL_OFFSET_INI:
- case ES8326_HPR_OFFSET_INI:
- case ES8326_HPDET_STA:
- case ES8326_CTIA_OMTP_STA:
- case ES8326_CSM_MUTE_STA:
return true;
That's clearly not just a name chnage, it's extending the set of volatile registers which should really be a separate patch - if you need to resend for some other reason please split it out, but if there's no other issues in the series don't worry here and just consider it next time.
On Fri, Jul 14, 2023 at 11:24:50AM +0800, Zhu Ning wrote:
The old register naming method is confusing. The reg 0x57 decides the default headset hardware connection type, and the reg 0xfb is the headset detection status register, which changes during headset insertion. Change the name to ES8326_HPDET_TYPE and ES8326_HPDET_STA.
This breaks an x86 allmodconfig build:
/build/stage/linux/sound/soc/codecs/es8326.c: In function ‘es8326_resume’: /build/stage/linux/sound/soc/codecs/es8326.c:659:38: error: ‘ES8326_HP_DET’ undeclared (first use in this function); did you mean ‘ES8326_HP_OFF’? 659 | regmap_write(es8326->regmap, ES8326_HP_DET, | ^~~~~~~~~~~~~ | ES8326_HP_OFF
Old power-up sequence causes large pop noise during start-up. Using a new sequence instead.
Also, the registers are now reset to default value in suspend function.
Signed-off-by: Zhu Ning zhuning0077@gmail.com --- sound/soc/codecs/es8326.c | 97 ++++++++++++++++++++++++++++----------- sound/soc/codecs/es8326.h | 10 +++- 2 files changed, 78 insertions(+), 29 deletions(-)
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index 8c78f0bf514b..653b09600887 100644 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -522,9 +522,9 @@ static void es8326_jack_button_handler(struct work_struct *work)
if (!(es8326->jack->status & SND_JACK_HEADSET)) /* Jack unplugged */ return; - mutex_lock(&es8326->lock); iface = snd_soc_component_read(comp, ES8326_HPDET_STA); + switch (iface) { case 0x93: /* pause button detected */ @@ -638,40 +638,77 @@ static irqreturn_t es8326_irq(int irq, void *dev_id) static int es8326_resume(struct snd_soc_component *component) { struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component); - unsigned int reg;
regcache_cache_only(es8326->regmap, false); regcache_sync(es8326->regmap);
+ /* reset internal clock state */ + regmap_write(es8326->regmap, ES8326_RESET, 0x1f); + regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x0E); + usleep_range(10000, 15000); + regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88); + /* set headphone default type and detect pin */ + regmap_write(es8326->regmap, ES8326_HPDET_TYPE, 0x81); + regmap_write(es8326->regmap, ES8326_CLK_RESAMPLE, 0x05); + + /* set internal oscillator as clock source of headpone cp */ + regmap_write(es8326->regmap, ES8326_CLK_DIV_CPC, 0x84); regmap_write(es8326->regmap, ES8326_CLK_CTL, ES8326_CLK_ON); - /* Two channel ADC */ - regmap_write(es8326->regmap, ES8326_PULLUP_CTL, 0x02); + /* clock manager reset release */ + regmap_write(es8326->regmap, ES8326_RESET, 0x17); + /* set headphone detection as half scan mode */ + regmap_write(es8326->regmap, ES8326_HP_MISC, 0x08); + regmap_write(es8326->regmap, ES8326_PULLUP_CTL, 0x00); + + /* enable headphone driver */ + regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa7); + usleep_range(2000, 5000); + regmap_write(es8326->regmap, ES8326_HP_DRIVER_REF, 0xab); + usleep_range(2000, 5000); + regmap_write(es8326->regmap, ES8326_HP_DRIVER_REF, 0xbb); + usleep_range(2000, 5000); + regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa1); + regmap_write(es8326->regmap, ES8326_CLK_INV, 0x00); - regmap_write(es8326->regmap, ES8326_CLK_DIV_CPC, 0x1F); - regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xC8); - regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x88); - regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x20); + regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xc4); + regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x81); + regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x00); + + /* turn off headphone out */ + regmap_write(es8326->regmap, ES8326_HP_CAL, 0x00); + /* set ADC and DAC in low power mode */ + regmap_write(es8326->regmap, ES8326_ANA_LP, 0xf0); + + /* force micbias on */ + regmap_write(es8326->regmap, ES8326_ANA_MICBIAS, 0x4f); regmap_write(es8326->regmap, ES8326_SYS_BIAS, 0x08); - regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0x22); - regmap_write(es8326->regmap, ES8326_ADC1_SRC, es8326->mic1_src); - regmap_write(es8326->regmap, ES8326_ADC2_SRC, es8326->mic2_src); - regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88); - regmap_write(es8326->regmap, ES8326_HP_DET, - ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol); - regmap_write(es8326->regmap, ES8326_INT_SOURCE, es8326->interrupt_src); - regmap_write(es8326->regmap, ES8326_INTOUT_IO, es8326->interrupt_clk); + regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7F); + /* select vdda as micbias source */ + regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x23); + /* set dac dsmclip = 1 */ + regmap_write(es8326->regmap, ES8326_DAC_DSM, 0x08); + regmap_write(es8326->regmap, ES8326_DAC_VPPSCALE, 0x15); + + regmap_write(es8326->regmap, ES8326_INT_SOURCE, + (ES8326_INT_SRC_PIN9 | ES8326_INT_SRC_BUTTON)); + regmap_write(es8326->regmap, ES8326_INTOUT_IO, + es8326->interrupt_clk); + regmap_write(es8326->regmap, ES8326_SDINOUT1_IO, + (ES8326_IO_DMIC_CLK << ES8326_SDINOUT1_SHIFT)); + regmap_write(es8326->regmap, ES8326_SDINOUT23_IO, ES8326_IO_INPUT); + + regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x3b); regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_ON); - snd_soc_component_update_bits(component, ES8326_PGAGAIN, - ES8326_MIC_SEL_MASK, ES8326_MIC1_SEL); - - regmap_read(es8326->regmap, ES8326_CHIP_VERSION, ®); - if ((reg & ES8326_VERSION_B) == 1) { - regmap_write(es8326->regmap, ES8326_ANA_MICBIAS, 0xDD); - regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7F); - regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x0F); - /* enable button detect */ - regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xA0); - } + regmap_update_bits(es8326->regmap, ES8326_PGAGAIN, ES8326_MIC_SEL_MASK, + ES8326_MIC1_SEL); + + regmap_update_bits(es8326->regmap, ES8326_DAC_MUTE, ES8326_MUTE_MASK, + ES8326_MUTE); + + regmap_write(es8326->regmap, ES8326_HPDET_TYPE, 0x80 | + ((es8326->version == ES8326_VERSION_B) ? + (ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol) : + (ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol | 0x04)));
es8326_irq(es8326->irq, es8326); return 0; @@ -688,6 +725,10 @@ static int es8326_suspend(struct snd_soc_component *component) regcache_cache_only(es8326->regmap, true); regcache_mark_dirty(es8326->regmap);
+ /* reset register value to default */ + regmap_write(es8326->regmap, ES8326_CSM_I2C_STA, 0x01); + usleep_range(1000, 3000); + regmap_write(es8326->regmap, ES8326_CSM_I2C_STA, 0x00); return 0; }
@@ -717,7 +758,7 @@ static int es8326_probe(struct snd_soc_component *component) ret = device_property_read_u8(component->dev, "everest,jack-pol", &es8326->jack_pol); if (ret != 0) { dev_dbg(component->dev, "jack-pol return %d", ret); - es8326->jack_pol = ES8326_HP_DET_BUTTON_POL | ES8326_HP_TYPE_OMTP; + es8326->jack_pol = ES8326_HP_TYPE_AUTO; } dev_dbg(component->dev, "jack-pol %x", es8326->jack_pol);
diff --git a/sound/soc/codecs/es8326.h b/sound/soc/codecs/es8326.h index 6cb8e3ed76e3..868a3f528b14 100644 --- a/sound/soc/codecs/es8326.h +++ b/sound/soc/codecs/es8326.h @@ -160,6 +160,13 @@ #define ES8326_HP_TYPE_AUTO (1 << 0) #define ES8326_HP_TYPE_AUTO_INV (0 << 0)
+/* ES8326_INT_SOURCE */ +#define ES8326_INT_SRC_DAC_MOZ (1 << 0) +#define ES8326_INT_SRC_ADC_MOZ (1 << 1) +#define ES8326_INT_SRC_BUTTON (1 << 2) +#define ES8326_INT_SRC_PIN9 (1 << 3) +#define ES8326_INT_SRC_PIN27 (1 << 4) + /* ES8326_SDINOUT1_IO */ #define ES8326_IO_INPUT (0 << 0) #define ES8326_IO_SDIN_SLOT0 (1 << 0) @@ -183,7 +190,8 @@ #define ES8326_HPBUTTON_FLAG (1 << 0)
/* ES8326_CHIP_VERSION 0xFF */ -#define ES8326_VERSION_B (1 << 0) +#define ES8326_VERSION (1 << 0) +#define ES8326_VERSION_B (3 << 0)
#endif
Version_b requires a new way of calibrating headset offset. A new calibration function is added.
Signed-off-by: Zhu Ning zhuning0077@gmail.com --- sound/soc/codecs/es8326.c | 83 ++++++++++++++++++++++++++++++++------- 1 file changed, 68 insertions(+), 15 deletions(-)
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index 653b09600887..0474bfd79aa5 100644 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -388,6 +388,7 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction) { struct snd_soc_component *component = dai->component; struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component); + unsigned int offset_l, offset_r;
if (mute) { regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_OFF); @@ -398,10 +399,16 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction) if (!es8326->calibrated) { regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_FORCE_CAL); msleep(30); + regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_OFF); + regmap_read(es8326->regmap, ES8326_HPL_OFFSET_INI, &offset_l); + regmap_read(es8326->regmap, ES8326_HPR_OFFSET_INI, &offset_r); + regmap_write(es8326->regmap, ES8326_HP_OFFSET_CAL, 0x8c); + regmap_write(es8326->regmap, ES8326_HPL_OFFSET_INI, offset_l); + regmap_write(es8326->regmap, ES8326_HPR_OFFSET_INI, offset_r); es8326->calibrated = true; } regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa0); - regmap_write(es8326->regmap, ES8326_HP_VOL, 0x00); + regmap_write(es8326->regmap, ES8326_HP_VOL, 0x80); regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_ON); regmap_update_bits(es8326->regmap, ES8326_DAC_MUTE, ES8326_MUTE_MASK, ~(ES8326_MUTE)); @@ -420,15 +427,17 @@ static int es8326_set_bias_level(struct snd_soc_component *codec, ret = clk_prepare_enable(es8326->mclk); if (ret) return ret; - regmap_write(es8326->regmap, ES8326_RESET, ES8326_PWRUP_SEQ_EN); - regmap_write(es8326->regmap, ES8326_INTOUT_IO, 0x45); + + regmap_write(es8326->regmap, ES8326_RESET, 0x9f); + msleep(20); + regmap_update_bits(es8326->regmap, ES8326_DAC_DSM, 0x01, 0x00); + regmap_write(es8326->regmap, ES8326_INTOUT_IO, es8326->interrupt_clk); regmap_write(es8326->regmap, ES8326_SDINOUT1_IO, (ES8326_IO_DMIC_CLK << ES8326_SDINOUT1_SHIFT)); - regmap_write(es8326->regmap, ES8326_SDINOUT23_IO, ES8326_IO_INPUT); - regmap_write(es8326->regmap, ES8326_CLK_RESAMPLE, 0x05); - regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x02); + regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x0E); regmap_write(es8326->regmap, ES8326_PGA_PDN, 0x40); - regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0xAA); + regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x00); + regmap_update_bits(es8326->regmap, ES8326_CLK_CTL, 0x20, 0x20); regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_ON); break; case SND_SOC_BIAS_PREPARE: @@ -437,15 +446,10 @@ static int es8326_set_bias_level(struct snd_soc_component *codec, break; case SND_SOC_BIAS_OFF: clk_disable_unprepare(es8326->mclk); - regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0x11); - regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_OFF); - regmap_write(es8326->regmap, ES8326_PGA_PDN, 0xF8); + regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x3b); regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x00); - regmap_write(es8326->regmap, ES8326_INT_SOURCE, 0x08); + regmap_update_bits(es8326->regmap, ES8326_CLK_CTL, 0x20, 0x00); regmap_write(es8326->regmap, ES8326_SDINOUT1_IO, ES8326_IO_INPUT); - regmap_write(es8326->regmap, ES8326_SDINOUT23_IO, ES8326_IO_INPUT); - regmap_write(es8326->regmap, ES8326_RESET, - ES8326_CODEC_RESET | ES8326_PWRUP_SEQ_EN); break; }
@@ -635,6 +639,54 @@ static irqreturn_t es8326_irq(int irq, void *dev_id) return IRQ_HANDLED; }
+static int es8326_calibrate(struct snd_soc_component *component) +{ + struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component); + unsigned int reg; + unsigned int offset_l, offset_r; + + regmap_read(es8326->regmap, ES8326_CHIP_VERSION, ®); + es8326->version = reg; + + if ((es8326->version == ES8326_VERSION_B) && (es8326->calibrated == false)) { + dev_dbg(component->dev, "ES8326_VERSION_B, calibrating\n"); + regmap_write(es8326->regmap, ES8326_CLK_INV, 0xc0); + regmap_write(es8326->regmap, ES8326_CLK_DIV1, 0x01); + regmap_write(es8326->regmap, ES8326_CLK_DLL, 0x30); + regmap_write(es8326->regmap, ES8326_CLK_MUX, 0xed); + regmap_write(es8326->regmap, ES8326_CLK_TRI, 0xc1); + regmap_write(es8326->regmap, ES8326_DAC_MUTE, 0x03); + regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7f); + regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x33); + regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0x88); + regmap_write(es8326->regmap, ES8326_HP_VOL, 0x80); + regmap_write(es8326->regmap, ES8326_HP_OFFSET_CAL, 0x8c); + regmap_write(es8326->regmap, ES8326_RESET, 0xc0); + usleep_range(15000, 20000); + + regmap_write(es8326->regmap, ES8326_HP_OFFSET_CAL, ES8326_HP_OFF); + regmap_read(es8326->regmap, ES8326_CSM_MUTE_STA, ®); + if ((reg & 0xf0) != 0x40) + msleep(50); + + regmap_write(es8326->regmap, ES8326_HP_CAL, 0xd4); + msleep(200); + regmap_write(es8326->regmap, ES8326_HP_CAL, 0x4d); + msleep(200); + regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_OFF); + regmap_read(es8326->regmap, ES8326_HPL_OFFSET_INI, &offset_l); + regmap_read(es8326->regmap, ES8326_HPR_OFFSET_INI, &offset_r); + regmap_write(es8326->regmap, ES8326_HP_OFFSET_CAL, 0x8c); + regmap_write(es8326->regmap, ES8326_HPL_OFFSET_INI, offset_l); + regmap_write(es8326->regmap, ES8326_HPR_OFFSET_INI, offset_r); + regmap_write(es8326->regmap, ES8326_CLK_INV, 0x00); + + es8326->calibrated = true; + } + + return 0; +} + static int es8326_resume(struct snd_soc_component *component) { struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component); @@ -673,7 +725,8 @@ static int es8326_resume(struct snd_soc_component *component) regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xc4); regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x81); regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x00); - + /* calibrate for B version */ + es8326_calibrate(component); /* turn off headphone out */ regmap_write(es8326->regmap, ES8326_HP_CAL, 0x00); /* set ADC and DAC in low power mode */
The old jack detection function only supports fixed OMTP/CTIA hardware connection. The new one supports auto OMTP/CTIA headset detection
Signed-off-by: Zhu Ning zhuning0077@gmail.com --- sound/soc/codecs/es8326.c | 111 +++++++++++++++++++++++++++++++------- 1 file changed, 91 insertions(+), 20 deletions(-)
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index 0474bfd79aa5..40bd9b7c82ed 100644 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -41,6 +41,8 @@ struct es8326_priv {
bool calibrated; int version; + int hp; + int jack_remove_retry; };
static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(dac_vol_tlv, -9550, 50, 0); @@ -535,6 +537,7 @@ static void es8326_jack_button_handler(struct work_struct *work) cur_button = SND_JACK_BTN_0; break; case 0x6f: + case 0x4b: /* button volume up */ cur_button = SND_JACK_BTN_1; break; @@ -543,6 +546,7 @@ static void es8326_jack_button_handler(struct work_struct *work) cur_button = SND_JACK_BTN_2; break; case 0x1e: + case 0xe2: /* button released or not pressed */ cur_button = 0; break; @@ -552,20 +556,20 @@ static void es8326_jack_button_handler(struct work_struct *work)
if ((prev_button == cur_button) && (cur_button != 0)) { press_count++; - if (press_count > 10) { - /* report a press every 500ms */ + if (press_count > 3) { + /* report a press every 120ms */ snd_soc_jack_report(es8326->jack, cur_button, SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2); press_count = 0; } button_to_report = cur_button; queue_delayed_work(system_wq, &es8326->button_press_work, - msecs_to_jiffies(50)); + msecs_to_jiffies(35)); } else if (prev_button != cur_button) { /* mismatch, detect again */ prev_button = cur_button; queue_delayed_work(system_wq, &es8326->button_press_work, - msecs_to_jiffies(50)); + msecs_to_jiffies(35)); } else { /* released or no pressed */ if (button_to_report != 0) { @@ -589,32 +593,96 @@ static void es8326_jack_detect_handler(struct work_struct *work) mutex_lock(&es8326->lock); iface = snd_soc_component_read(comp, ES8326_HPDET_STA); dev_dbg(comp->dev, "gpio flag %#04x", iface); + + if (es8326->jack_remove_retry == 1) { + if (iface & ES8326_HPINSERT_FLAG) + es8326->jack_remove_retry = 2; + else + es8326->jack_remove_retry = 0; + + dev_dbg(comp->dev, "remove event check, set HPJACK_POL normal, cnt = %d\n", + es8326->jack_remove_retry); + /* + * Inverted HPJACK_POL bit to trigger one IRQ to double check HP Removal event + */ + regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, + ES8326_HP_DET_JACK_POL, (es8326->jd_inverted ? + ~es8326->jack_pol : es8326->jack_pol)); + goto exit; + } + if ((iface & ES8326_HPINSERT_FLAG) == 0) { /* Jack unplugged or spurious IRQ */ - dev_dbg(comp->dev, "No headset detected"); + dev_dbg(comp->dev, "No headset detected\n"); + es8326_disable_micbias(es8326->component); if (es8326->jack->status & SND_JACK_HEADPHONE) { + dev_dbg(comp->dev, "Report hp remove event\n"); snd_soc_jack_report(es8326->jack, 0, SND_JACK_HEADSET); - snd_soc_component_write(comp, ES8326_ADC1_SRC, es8326->mic2_src); - es8326_disable_micbias(comp); + /* mute adc when mic path switch */ + regmap_write(es8326->regmap, ES8326_ADC_SCALE, 0x33); + regmap_write(es8326->regmap, ES8326_ADC1_SRC, 0x44); + regmap_write(es8326->regmap, ES8326_ADC2_SRC, 0x66); + es8326->hp = 0; + } + regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x01); + /* + * Inverted HPJACK_POL bit to trigger one IRQ to double check HP Removal event + */ + if (es8326->jack_remove_retry == 0) { + es8326->jack_remove_retry = 1; + dev_dbg(comp->dev, "remove event check, invert HPJACK_POL, cnt = %d\n", + es8326->jack_remove_retry); + regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, + ES8326_HP_DET_JACK_POL, (es8326->jd_inverted ? + es8326->jack_pol : ~es8326->jack_pol)); + + } else { + es8326->jack_remove_retry = 0; } } else if ((iface & ES8326_HPINSERT_FLAG) == ES8326_HPINSERT_FLAG) { + es8326->jack_remove_retry = 0; + if (es8326->hp == 0) { + dev_dbg(comp->dev, "First insert, start OMTP/CTIA type check\n"); + /* + * set auto-check mode, then restart jack_detect_work after 100ms. + * Don't report jack status. + */ + regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x01); + usleep_range(50000, 70000); + regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x00); + queue_delayed_work(system_wq, &es8326->jack_detect_work, + msecs_to_jiffies(100)); + es8326->hp = 1; + goto exit; + } if (es8326->jack->status & SND_JACK_HEADSET) { /* detect button */ + dev_dbg(comp->dev, "button pressed\n"); queue_delayed_work(system_wq, &es8326->button_press_work, 10); + goto exit; + } + if ((iface & ES8326_HPBUTTON_FLAG) == 0x01) { + dev_dbg(comp->dev, "Headphone detected\n"); + snd_soc_jack_report(es8326->jack, + SND_JACK_HEADPHONE, SND_JACK_HEADSET); } else { - if ((iface & ES8326_HPBUTTON_FLAG) == 0x00) { - dev_dbg(comp->dev, "Headset detected"); - snd_soc_jack_report(es8326->jack, - SND_JACK_HEADSET, SND_JACK_HEADSET); - snd_soc_component_write(comp, - ES8326_ADC1_SRC, es8326->mic1_src); - } else { - dev_dbg(comp->dev, "Headphone detected"); - snd_soc_jack_report(es8326->jack, - SND_JACK_HEADPHONE, SND_JACK_HEADSET); - } + dev_dbg(comp->dev, "Headset detected\n"); + snd_soc_jack_report(es8326->jack, + SND_JACK_HEADSET, SND_JACK_HEADSET); + + regmap_write(es8326->regmap, ES8326_ADC_SCALE, 0x33); + regmap_update_bits(es8326->regmap, ES8326_PGA_PDN, + 0x08, 0x08); + regmap_update_bits(es8326->regmap, ES8326_PGAGAIN, + 0x80, 0x80); + regmap_write(es8326->regmap, ES8326_ADC1_SRC, 0x00); + regmap_write(es8326->regmap, ES8326_ADC2_SRC, 0x00); + regmap_update_bits(es8326->regmap, ES8326_PGA_PDN, + 0x08, 0x00); + usleep_range(10000, 15000); } } +exit: mutex_unlock(&es8326->lock); }
@@ -633,7 +701,7 @@ static irqreturn_t es8326_irq(int irq, void *dev_id) msecs_to_jiffies(10)); else queue_delayed_work(system_wq, &es8326->jack_detect_work, - msecs_to_jiffies(300)); + msecs_to_jiffies(600));
out: return IRQ_HANDLED; @@ -763,7 +831,10 @@ static int es8326_resume(struct snd_soc_component *component) (ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol) : (ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol | 0x04)));
- es8326_irq(es8326->irq, es8326); + es8326->jack_remove_retry = 0; + es8326->hp = 0; + dev_dbg(component->dev, "es8326->jack_remove_retry = %d", es8326->jack_remove_retry); + dev_dbg(component->dev, "es8326->hp= %d", es8326->hp); return 0; }
On Fri, 14 Jul 2023 11:24:49 +0800, Zhu Ning wrote:
The internal analog power and hp Vref of es8326 should always be on to reduce pop noise. The HP_VOL and HP_CAL are moved to es8326_mute function so they are turned on at last and turned off at first.
Also, the calibration should be done manually once during start-up to reduce DC offset on headphone.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/5] ASoC: codecs: ES8326: Add es8326_mute function commit: 083912c240de0c5f797da0443f5a99e87b75fcb3 [2/5] ASoC: codecs: ES8326: Change Hp_detect and volatile reg function (no commit info) [3/5] ASoC: codecs: ES8326: Fix power-up sequence (no commit info) [4/5] ASOC: codecs: ES8326: Add calibration support for version_b (no commit info) [5/5] ASoC: codecs: ES8326: Update jact detection function (no commit info)
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Mark Brown -
Zhu Ning