[alsa-devel] [PATCH] ASoC: Add ssm2518 support
This patch adds a ASoC CODEC driver for the SSM2516. The SSM2516 is a stereo Class-D audio amplifier with an I2S interface for audio in and a built-in dynamic range control processor.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- .../devicetree/bindings/sound/ssm2518.txt | 20 + include/linux/platform_data/ssm2518.h | 22 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ssm2518.c | 845 +++++++++++++++++++++ sound/soc/codecs/ssm2518.h | 20 + 6 files changed, 913 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ssm2518.txt create mode 100644 include/linux/platform_data/ssm2518.h create mode 100644 sound/soc/codecs/ssm2518.c create mode 100644 sound/soc/codecs/ssm2518.h
diff --git a/Documentation/devicetree/bindings/sound/ssm2518.txt b/Documentation/devicetree/bindings/sound/ssm2518.txt new file mode 100644 index 0000000..59381a7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ssm2518.txt @@ -0,0 +1,20 @@ +SSM2518 audio amplifier + +This device supports I2C only. + +Required properties: + - compatible : Must be "adi,ssm2518" + - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low) + or 0x35 (ADDR pin high) + +Optional properties: + - gpios : GPIO connected to the nSD pin. If the property is not present it is + assumed that the nSD pin is hardwired to always on. + +Example: + + ssm2518: ssm2518@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + gpios = <&gpio 5 0>; + }; diff --git a/include/linux/platform_data/ssm2518.h b/include/linux/platform_data/ssm2518.h new file mode 100644 index 0000000..9a8e3ea --- /dev/null +++ b/include/linux/platform_data/ssm2518.h @@ -0,0 +1,22 @@ +/* + * SSM2518 amplifier audio driver + * + * Copyright 2013 Analog Devices Inc. + * Author: Lars-Peter Clausen lars@metafoo.de + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__ +#define __LINUX_PLATFORM_DATA_SSM2518_H__ + +/** + * struct ssm2518_platform_data - Platform data for the ssm2518 driver + * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is + * hardwired. + */ +struct ssm2518_platform_data { + int enable_gpio; +}; + +#endif diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 2f45f00..d76609a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -60,6 +60,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_SI476X if MFD_SI476X_CORE select SND_SOC_SN95031 if INTEL_SCU_IPC select SND_SOC_SPDIF + select SND_SOC_SSM2518 if I2C select SND_SOC_SSM2602 if SND_SOC_I2C_AND_SPI select SND_SOC_STA32X if I2C select SND_SOC_STA529 if I2C @@ -313,6 +314,9 @@ config SND_SOC_SN95031 config SND_SOC_SPDIF tristate
+config SND_SOC_SSM2518 + tristate + config SND_SOC_SSM2602 tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index dae0aa6..7204c24 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -52,6 +52,7 @@ snd-soc-si476x-objs := si476x.o snd-soc-sn95031-objs := sn95031.o snd-soc-spdif-tx-objs := spdif_transmitter.o snd-soc-spdif-rx-objs := spdif_receiver.o +snd-soc-ssm2518-objs := ssm2518.o snd-soc-ssm2602-objs := ssm2602.o snd-soc-sta32x-objs := sta32x.o snd-soc-sta529-objs := sta529.o @@ -176,6 +177,7 @@ obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o obj-$(CONFIG_SND_SOC_SI476X) += snd-soc-si476x.o obj-$(CONFIG_SND_SOC_SN95031) +=snd-soc-sn95031.o obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o +obj-$(CONFIG_SND_SOC_SSM2518) += snd-soc-ssm2518.o obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o obj-$(CONFIG_SND_SOC_STA32X) += snd-soc-sta32x.o obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o diff --git a/sound/soc/codecs/ssm2518.c b/sound/soc/codecs/ssm2518.c new file mode 100644 index 0000000..5874ba5 --- /dev/null +++ b/sound/soc/codecs/ssm2518.c @@ -0,0 +1,845 @@ +/* + * SSM2518 amplifier audio driver + * + * Copyright 2013 Analog Devices Inc. + * Author: Lars-Peter Clausen lars@metafoo.de + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/platform_data/ssm2518.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "ssm2518.h" + +#define SSM2518_REG_POWER1 0x00 +#define SSM2518_REG_CLOCK 0x01 +#define SSM2518_REG_SAI_CTRL1 0x02 +#define SSM2518_REG_SAI_CTRL2 0x03 +#define SSM2518_REG_CHAN_MAP 0x04 +#define SSM2518_REG_LEFT_VOL 0x05 +#define SSM2518_REG_RIGHT_VOL 0x06 +#define SSM2518_REG_MUTE_CTRL 0x07 +#define SSM2518_REG_FAULT_CTRL 0x08 +#define SSM2518_REG_POWER2 0x09 +#define SSM2518_REG_DRC_1 0x0a +#define SSM2518_REG_DRC_2 0x0b +#define SSM2518_REG_DRC_3 0x0c +#define SSM2518_REG_DRC_4 0x0d +#define SSM2518_REG_DRC_5 0x0e +#define SSM2518_REG_DRC_6 0x0f +#define SSM2518_REG_DRC_7 0x10 +#define SSM2518_REG_DRC_8 0x11 +#define SSM2518_REG_DRC_9 0x12 + +#define SSM2518_POWER1_RESET BIT(7) +#define SSM2518_POWER1_NO_BCLK BIT(5) +#define SSM2518_POWER1_MCS_MASK (0xf << 1) +#define SSM2518_POWER1_MCS_64FS (0x0 << 1) +#define SSM2518_POWER1_MCS_128FS (0x1 << 1) +#define SSM2518_POWER1_MCS_256FS (0x2 << 1) +#define SSM2518_POWER1_MCS_384FS (0x3 << 1) +#define SSM2518_POWER1_MCS_512FS (0x4 << 1) +#define SSM2518_POWER1_MCS_768FS (0x5 << 1) +#define SSM2518_POWER1_MCS_100FS (0x6 << 1) +#define SSM2518_POWER1_MCS_200FS (0x7 << 1) +#define SSM2518_POWER1_MCS_400FS (0x8 << 1) +#define SSM2518_POWER1_SPWDN BIT(0) + +#define SSM2518_CLOCK_ASR BIT(0) + +#define SSM2518_SAI_CTRL1_FMT_MASK (0x3 << 5) +#define SSM2518_SAI_CTRL1_FMT_I2S (0x0 << 5) +#define SSM2518_SAI_CTRL1_FMT_LJ (0x1 << 5) +#define SSM2518_SAI_CTRL1_FMT_RJ_24BIT (0x2 << 5) +#define SSM2518_SAI_CTRL1_FMT_RJ_16BIT (0x3 << 5) + +#define SSM2518_SAI_CTRL1_SAI_MASK (0x7 << 2) +#define SSM2518_SAI_CTRL1_SAI_I2S (0x0 << 2) +#define SSM2518_SAI_CTRL1_SAI_TDM_2 (0x1 << 2) +#define SSM2518_SAI_CTRL1_SAI_TDM_4 (0x2 << 2) +#define SSM2518_SAI_CTRL1_SAI_TDM_8 (0x3 << 2) +#define SSM2518_SAI_CTRL1_SAI_TDM_16 (0x4 << 2) +#define SSM2518_SAI_CTRL1_SAI_MONO (0x5 << 2) + +#define SSM2518_SAI_CTRL1_FS_MASK (0x3) +#define SSM2518_SAI_CTRL1_FS_8000_12000 (0x0) +#define SSM2518_SAI_CTRL1_FS_16000_24000 (0x1) +#define SSM2518_SAI_CTRL1_FS_32000_48000 (0x2) +#define SSM2518_SAI_CTRL1_FS_64000_96000 (0x3) + +#define SSM2518_SAI_CTRL2_BCLK_INTERAL BIT(7) +#define SSM2518_SAI_CTRL2_LRCLK_PULSE BIT(6) +#define SSM2518_SAI_CTRL2_LRCLK_INVERT BIT(5) +#define SSM2518_SAI_CTRL2_MSB BIT(4) +#define SSM2518_SAI_CTRL2_SLOT_WIDTH_MASK (0x3 << 2) +#define SSM2518_SAI_CTRL2_SLOT_WIDTH_32 (0x0 << 2) +#define SSM2518_SAI_CTRL2_SLOT_WIDTH_24 (0x1 << 2) +#define SSM2518_SAI_CTRL2_SLOT_WIDTH_16 (0x2 << 2) +#define SSM2518_SAI_CTRL2_BCLK_INVERT BIT(1) + +#define SSM2518_CHAN_MAP_RIGHT_SLOT_OFFSET 4 +#define SSM2518_CHAN_MAP_RIGHT_SLOT_MASK 0xf0 +#define SSM2518_CHAN_MAP_LEFT_SLOT_OFFSET 0 +#define SSM2518_CHAN_MAP_LEFT_SLOT_MASK 0x0f + +#define SSM2518_MUTE_CTRL_ANA_GAIN BIT(5) +#define SSM2518_MUTE_CTRL_MUTE_MASTER BIT(0) + +#define SSM2518_POWER2_APWDN BIT(0) + +#define SSM2518_DAC_MUTE BIT(6) +#define SSM2518_DAC_FS_MASK 0x07 +#define SSM2518_DAC_FS_8000 0x00 +#define SSM2518_DAC_FS_16000 0x01 +#define SSM2518_DAC_FS_32000 0x02 +#define SSM2518_DAC_FS_64000 0x03 +#define SSM2518_DAC_FS_128000 0x04 + +struct ssm2518 { + struct regmap *regmap; + bool right_j; + + unsigned int sysclk; + const struct snd_pcm_hw_constraint_list *constraints; + + int enable_gpio; +}; + +static const struct reg_default ssm2518_reg_defaults[] = { + { 0x00, 0x05 }, + { 0x01, 0x00 }, + { 0x02, 0x02 }, + { 0x03, 0x00 }, + { 0x04, 0x10 }, + { 0x05, 0x40 }, + { 0x06, 0x40 }, + { 0x07, 0x81 }, + { 0x08, 0x0c }, + { 0x09, 0x99 }, + { 0x0a, 0x7c }, + { 0x0b, 0x5b }, + { 0x0c, 0x57 }, + { 0x0d, 0x89 }, + { 0x0e, 0x8c }, + { 0x0f, 0x77 }, + { 0x10, 0x26 }, + { 0x11, 0x1c }, + { 0x12, 0x97 }, +}; + +static const DECLARE_TLV_DB_MINMAX_MUTE(ssm2518_vol_tlv, -7125, 2400); +static const DECLARE_TLV_DB_SCALE(ssm2518_compressor_tlv, -3400, 200, 0); +static const DECLARE_TLV_DB_SCALE(ssm2518_expander_tlv, -8100, 300, 0); +static const DECLARE_TLV_DB_SCALE(ssm2518_noise_gate_tlv, -9600, 300, 0); +static const DECLARE_TLV_DB_SCALE(ssm2518_post_drc_tlv, -2400, 300, 0); + +static const DECLARE_TLV_DB_RANGE(ssm2518_limiter_tlv, + 0, 7, TLV_DB_SCALE_ITEM(-2200, 200, 0), + 7, 15, TLV_DB_SCALE_ITEM(-800, 100, 0), +); + +static const char * const ssm2518_drc_peak_detector_attack_time_text[] = { + "0 ms", "0.1 ms", "0.19 ms", "0.37 ms", "0.75 ms", "1.5 ms", "3 ms", + "6 ms", "12 ms", "24 ms", "48 ms", "96 ms", "192 ms", "384 ms", + "768 ms", "1536 ms", +}; + +static const char * const ssm2518_drc_peak_detector_release_time_text[] = { + "0 ms", "1.5 ms", "3 ms", "6 ms", "12 ms", "24 ms", "48 ms", "96 ms", + "192 ms", "384 ms", "768 ms", "1536 ms", "3072 ms", "6144 ms", + "12288 ms", "24576 ms" +}; + +static const char * const ssm2518_drc_hold_time_text[] = { + "0 ms", "0.67 ms", "1.33 ms", "2.67 ms", "5.33 ms", "10.66 ms", + "21.32 ms", "42.64 ms", "85.28 ms", "170.56 ms", "341.12 ms", + "682.24 ms", "1364 ms", +}; + +static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_peak_detector_attack_time_enum, + SSM2518_REG_DRC_2, 4, ssm2518_drc_peak_detector_attack_time_text); +static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_peak_detector_release_time_enum, + SSM2518_REG_DRC_2, 0, ssm2518_drc_peak_detector_release_time_text); +static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_attack_time_enum, + SSM2518_REG_DRC_6, 4, ssm2518_drc_peak_detector_attack_time_text); +static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_decay_time_enum, + SSM2518_REG_DRC_6, 0, ssm2518_drc_peak_detector_release_time_text); +static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_hold_time_enum, + SSM2518_REG_DRC_7, 4, ssm2518_drc_hold_time_text); +static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_noise_gate_hold_time_enum, + SSM2518_REG_DRC_7, 0, ssm2518_drc_hold_time_text); +static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_rms_averaging_time_enum, + SSM2518_REG_DRC_9, 0, ssm2518_drc_peak_detector_release_time_text); + +static const struct snd_kcontrol_new ssm2518_snd_controls[] = { + SOC_SINGLE("Playback De-emphasis Switch", SSM2518_REG_MUTE_CTRL, + 4, 1, 0), + SOC_DOUBLE_R_TLV("Master Playback Volume", SSM2518_REG_LEFT_VOL, + SSM2518_REG_RIGHT_VOL, 0, 0xff, 1, ssm2518_vol_tlv), + SOC_DOUBLE("Master Playback Switch", SSM2518_REG_MUTE_CTRL, 2, 1, 1, 1), + + SOC_SINGLE("Amp Low Power Mode Switch", SSM2518_REG_POWER2, 4, 1, 0), + SOC_SINGLE("DAC Low Power Mode Switch", SSM2518_REG_POWER2, 3, 1, 0), + + SOC_SINGLE("DRC Limiter Switch", SSM2518_REG_DRC_1, 5, 1, 0), + SOC_SINGLE("DRC Compressor Switch", SSM2518_REG_DRC_1, 4, 1, 0), + SOC_SINGLE("DRC Expander Switch", SSM2518_REG_DRC_1, 3, 1, 0), + SOC_SINGLE("DRC Noise Gate Switch", SSM2518_REG_DRC_1, 2, 1, 0), + SOC_DOUBLE("DRC Switch", SSM2518_REG_DRC_1, 0, 1, 1, 0), + + SOC_SINGLE_TLV("DRC Limiter Threshold Volume", + SSM2518_REG_DRC_3, 4, 15, 1, ssm2518_limiter_tlv), + SOC_SINGLE_TLV("DRC Compressor Lower Threshold Volume", + SSM2518_REG_DRC_3, 0, 15, 1, ssm2518_compressor_tlv), + SOC_SINGLE_TLV("DRC Expander Upper Threshold Volume", SSM2518_REG_DRC_4, + 4, 15, 1, ssm2518_expander_tlv), + SOC_SINGLE_TLV("DRC Noise Gate Threshold Volume", + SSM2518_REG_DRC_4, 0, 15, 1, ssm2518_noise_gate_tlv), + SOC_SINGLE_TLV("DRC Upper Output Threshold Volume", + SSM2518_REG_DRC_5, 4, 15, 1, ssm2518_limiter_tlv), + SOC_SINGLE_TLV("DRC Lower Output Threshold Volume", + SSM2518_REG_DRC_5, 0, 15, 1, ssm2518_noise_gate_tlv), + SOC_SINGLE_TLV("DRC Post Volume", SSM2518_REG_DRC_8, + 2, 15, 1, ssm2518_post_drc_tlv), + + SOC_ENUM("DRC Peak Detector Attack Time", + ssm2518_drc_peak_detector_attack_time_enum), + SOC_ENUM("DRC Peak Detector Release Time", + ssm2518_drc_peak_detector_release_time_enum), + SOC_ENUM("DRC Attack Time", ssm2518_drc_attack_time_enum), + SOC_ENUM("DRC Decay Time", ssm2518_drc_decay_time_enum), + SOC_ENUM("DRC Hold Time", ssm2518_drc_hold_time_enum), + SOC_ENUM("DRC Noise Gate Hold Time", + ssm2518_drc_noise_gate_hold_time_enum), + SOC_ENUM("DRC RMS Averaging Time", ssm2518_drc_rms_averaging_time_enum), +}; + +static const struct snd_soc_dapm_widget ssm2518_dapm_widgets[] = { + SND_SOC_DAPM_DAC("DACL", "HiFi Playback", SSM2518_REG_POWER2, 1, 1), + SND_SOC_DAPM_DAC("DACR", "HiFi Playback", SSM2518_REG_POWER2, 2, 1), + + SND_SOC_DAPM_OUTPUT("OUTL"), + SND_SOC_DAPM_OUTPUT("OUTR"), +}; + +static const struct snd_soc_dapm_route ssm2518_routes[] = { + { "OUTL", NULL, "DACL" }, + { "OUTR", NULL, "DACR" }, +}; + +struct ssm2518_mcs_lut { + unsigned int rate; + const unsigned int *sysclks; +}; + +static const unsigned int ssm2518_sysclks_2048000[] = { + 2048000, 4096000, 8192000, 12288000, 16384000, 24576000, + 3200000, 6400000, 12800000, 0 +}; + +static const unsigned int ssm2518_sysclks_2822000[] = { + 2822000, 5644800, 11289600, 16934400, 22579200, 33868800, + 4410000, 8820000, 17640000, 0 +}; + +static const unsigned int ssm2518_sysclks_3072000[] = { + 3072000, 6144000, 12288000, 16384000, 24576000, 38864000, + 4800000, 9600000, 19200000, 0 +}; + +static const struct ssm2518_mcs_lut ssm2518_mcs_lut[] = { + { 8000, ssm2518_sysclks_2048000, }, + { 11025, ssm2518_sysclks_2822000, }, + { 12000, ssm2518_sysclks_3072000, }, + { 16000, ssm2518_sysclks_2048000, }, + { 24000, ssm2518_sysclks_3072000, }, + { 22050, ssm2518_sysclks_2822000, }, + { 32000, ssm2518_sysclks_2048000, }, + { 44100, ssm2518_sysclks_2822000, }, + { 48000, ssm2518_sysclks_3072000, }, + { 96000, ssm2518_sysclks_3072000, }, +}; + +static const unsigned int ssm2518_rates_2048000[] = { + 8000, 16000, 32000, +}; + +static const struct snd_pcm_hw_constraint_list ssm2518_constraints_2048000 = { + .list = ssm2518_rates_2048000, + .count = ARRAY_SIZE(ssm2518_rates_2048000), +}; + +static const unsigned int ssm2518_rates_2822000[] = { + 11025, 22050, 44100, +}; + +static const struct snd_pcm_hw_constraint_list ssm2518_constraints_2822000 = { + .list = ssm2518_rates_2822000, + .count = ARRAY_SIZE(ssm2518_rates_2822000), +}; + +static const unsigned int ssm2518_rates_3072000[] = { + 12000, 24000, 48000, 96000, +}; + +static const struct snd_pcm_hw_constraint_list ssm2518_constraints_3072000 = { + .list = ssm2518_rates_3072000, + .count = ARRAY_SIZE(ssm2518_rates_3072000), +}; + +static const unsigned int ssm2518_rates_12288000[] = { + 8000, 12000, 16000, 24000, 32000, 48000, 96000, +}; + +static const struct snd_pcm_hw_constraint_list ssm2518_constraints_12288000 = { + .list = ssm2518_rates_12288000, + .count = ARRAY_SIZE(ssm2518_rates_12288000), +}; + +static unsigned int ssm2518_lookup_mcs(struct ssm2518 *ssm2518, + unsigned int rate) +{ + const unsigned int *sysclks = NULL; + int i; + + for (i = 0; i < ARRAY_SIZE(ssm2518_mcs_lut); i++) { + if (ssm2518_mcs_lut[i].rate == rate) { + sysclks = ssm2518_mcs_lut[i].sysclks; + break; + } + } + if (!sysclks) + return -EINVAL; + + for (i = 0; sysclks[i]; i++) { + if (sysclks[i] == ssm2518->sysclk) + return i; + } + return -EINVAL; +} + +static int ssm2518_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec); + unsigned int rate = params_rate(params); + unsigned int ctrl1, ctrl1_mask; + int mcs; + int ret; + + mcs = ssm2518_lookup_mcs(ssm2518, rate); + if (mcs < 0) + return mcs; + + ctrl1_mask = SSM2518_SAI_CTRL1_FS_MASK; + + if (rate >= 8000 && rate <= 12000) + ctrl1 = SSM2518_SAI_CTRL1_FS_8000_12000; + else if (rate >= 16000 && rate <= 24000) + ctrl1 = SSM2518_SAI_CTRL1_FS_16000_24000; + else if (rate >= 32000 && rate <= 48000) + ctrl1 = SSM2518_SAI_CTRL1_FS_32000_48000; + else if (rate >= 64000 && rate <= 96000) + ctrl1 = SSM2518_SAI_CTRL1_FS_64000_96000; + else + return -EINVAL; + + if (ssm2518->right_j) { + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_16BIT; + break; + case SNDRV_PCM_FORMAT_S24_LE: + ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_24BIT; + break; + default: + return -EINVAL; + } + ctrl1_mask |= SSM2518_SAI_CTRL1_FMT_MASK; + } + + /* Disable auto samplerate detection */ + ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_CLOCK, + SSM2518_CLOCK_ASR, SSM2518_CLOCK_ASR); + if (ret < 0) + return ret; + + ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL1, + ctrl1_mask, ctrl1); + if (ret < 0) + return ret; + + return regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1, + SSM2518_POWER1_MCS_MASK, mcs << 1); +} + +static int ssm2518_mute(struct snd_soc_dai *dai, int mute) +{ + struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec); + unsigned int val; + + if (mute) + val = SSM2518_MUTE_CTRL_MUTE_MASTER; + else + val = 0; + + return regmap_update_bits(ssm2518->regmap, SSM2518_REG_MUTE_CTRL, + SSM2518_MUTE_CTRL_MUTE_MASTER, val); +} + +static int ssm2518_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec); + unsigned int ctrl1 = 0, ctrl2 = 0; + bool invert_fclk; + int ret; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + invert_fclk = false; + break; + case SND_SOC_DAIFMT_IB_NF: + ctrl2 |= SSM2518_SAI_CTRL2_BCLK_INVERT; + invert_fclk = false; + break; + case SND_SOC_DAIFMT_NB_IF: + invert_fclk = true; + break; + case SND_SOC_DAIFMT_IB_IF: + ctrl2 |= SSM2518_SAI_CTRL2_BCLK_INVERT; + invert_fclk = true; + break; + default: + return -EINVAL; + } + + ssm2518->right_j = false; + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + ctrl1 |= SSM2518_SAI_CTRL1_FMT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + ctrl1 |= SSM2518_SAI_CTRL1_FMT_LJ; + invert_fclk = !invert_fclk; + break; + case SND_SOC_DAIFMT_RIGHT_J: + ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_24BIT; + ssm2518->right_j = true; + invert_fclk = !invert_fclk; + break; + case SND_SOC_DAIFMT_DSP_A: + ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_PULSE; + ctrl1 |= SSM2518_SAI_CTRL1_FMT_I2S; + invert_fclk = false; + break; + case SND_SOC_DAIFMT_DSP_B: + ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_PULSE; + ctrl1 |= SSM2518_SAI_CTRL1_FMT_LJ; + invert_fclk = false; + break; + default: + return -EINVAL; + } + + if (invert_fclk) + ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_INVERT; + + ret = regmap_write(ssm2518->regmap, SSM2518_REG_SAI_CTRL1, ctrl1); + if (ret) + return ret; + return regmap_write(ssm2518->regmap, SSM2518_REG_SAI_CTRL2, ctrl2); +} + +static int ssm2518_set_power(struct ssm2518 *ssm2518, bool enable) +{ + int ret = 0; + + if (!enable) { + ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1, + SSM2518_POWER1_SPWDN, SSM2518_POWER1_SPWDN); + regcache_mark_dirty(ssm2518->regmap); + } + + if (gpio_is_valid(ssm2518->enable_gpio)) + gpio_set_value(ssm2518->enable_gpio, enable); + + regcache_cache_only(ssm2518->regmap, !enable); + + if (enable) { + ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1, + SSM2518_POWER1_SPWDN | SSM2518_POWER1_RESET, 0x00); + regcache_sync(ssm2518->regmap); + } + + return ret; +} + +static int ssm2518_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec); + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) + ret = ssm2518_set_power(ssm2518, true); + break; + case SND_SOC_BIAS_OFF: + ret = ssm2518_set_power(ssm2518, false); + break; + } + + if (ret) + return ret; + + codec->dapm.bias_level = level; + return 0; +} + +static int ssm2518_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, int width) +{ + struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec); + unsigned int ctrl1, ctrl2; + int left_slot, right_slot; + int ret; + + if (slots == 0) { + return regmap_update_bits(ssm2518->regmap, + SSM2518_REG_SAI_CTRL1, SSM2518_SAI_CTRL1_SAI_MASK, + SSM2518_SAI_CTRL1_SAI_I2S); + } + + if (tx_mask == 0 || tx_mask != 0) + return -EINVAL; + + if (slots == 1) { + if (tx_mask != 1) + return -EINVAL; + left_slot = 0; + right_slot = 0; + } else { + /* We assume the left channel < right channel */ + left_slot = ffs(tx_mask); + tx_mask &= ~(1 << tx_mask); + if (tx_mask == 0) { + right_slot = left_slot; + } else { + right_slot = ffs(tx_mask); + tx_mask &= ~(1 << tx_mask); + } + } + + if (tx_mask != 0 || left_slot >= slots || right_slot >= slots) + return -EINVAL; + + switch (width) { + case 16: + ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_16; + break; + case 24: + ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_24; + break; + case 32: + ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_32; + break; + default: + return -EINVAL; + } + + switch (slots) { + case 1: + ctrl1 = SSM2518_SAI_CTRL1_SAI_MONO; + break; + case 2: + ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_2; + break; + case 4: + ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_4; + break; + case 8: + ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_8; + break; + case 16: + ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_16; + break; + default: + return -EINVAL; + } + + ret = regmap_write(ssm2518->regmap, SSM2518_REG_CHAN_MAP, + (left_slot << SSM2518_CHAN_MAP_LEFT_SLOT_OFFSET) | + (right_slot << SSM2518_CHAN_MAP_RIGHT_SLOT_OFFSET)); + if (ret) + return ret; + ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL1, + SSM2518_SAI_CTRL1_SAI_MASK, ctrl1); + if (ret) + return ret; + return regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL2, + SSM2518_SAI_CTRL2_SLOT_WIDTH_MASK, ctrl2); +} + +static int ssm2518_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec); + + if (ssm2518->constraints) { + snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, ssm2518->constraints); + } + + return 0; +} + +#define SSM2518_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32) + +static const struct snd_soc_dai_ops ssm2518_dai_ops = { + .startup = ssm2518_startup, + .hw_params = ssm2518_hw_params, + .digital_mute = ssm2518_mute, + .set_fmt = ssm2518_set_dai_fmt, + .set_tdm_slot = ssm2518_set_tdm_slot, +}; + +static struct snd_soc_dai_driver ssm2518_dai = { + .name = "ssm2518-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = SSM2518_FORMATS, + }, + .ops = &ssm2518_dai_ops, +}; + +static int ssm2518_probe(struct snd_soc_codec *codec) +{ + struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec); + int ret; + + codec->control_data = ssm2518->regmap; + ret = snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER2, + SSM2518_POWER2_APWDN, 0x00); + if (ret) + return ret; + + return ssm2518_set_bias_level(codec, SND_SOC_BIAS_OFF); +} + +static int ssm2518_remove(struct snd_soc_codec *codec) +{ + ssm2518_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int ssm2518_set_sysclk(struct snd_soc_codec *codec, int clk_id, + int source, unsigned int freq, int dir) +{ + struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec); + unsigned int val; + + if (clk_id != SSM2518_SYSCLK) + return -EINVAL; + + switch (source) { + case SSM2518_SYSCLK_SRC_MCLK: + val = 0; + break; + case SSM2518_SYSCLK_SRC_BCLK: + /* In this case the bitclock is used as the system clock, and + * the bitclock signal needs to be connected to the MCLK pin and + * the BCLK pin is left unconnected */ + val = SSM2518_POWER1_NO_BCLK; + break; + default: + return -EINVAL; + } + + switch (freq) { + case 2048000: + case 4096000: + case 8192000: + case 3200000: + case 6400000: + case 12800000: + ssm2518->constraints = &ssm2518_constraints_2048000; + break; + case 2822000: + case 5644800: + case 11289600: + case 16934400: + case 22579200: + case 33868800: + case 4410000: + case 8820000: + case 17640000: + ssm2518->constraints = &ssm2518_constraints_2822000; + break; + case 3072000: + case 6144000: + case 38864000: + case 4800000: + case 9600000: + case 19200000: + ssm2518->constraints = &ssm2518_constraints_3072000; + break; + case 12288000: + case 16384000: + case 24576000: + ssm2518->constraints = &ssm2518_constraints_12288000; + break; + default: + return -EINVAL; + } + + ssm2518->sysclk = freq; + + return regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1, + SSM2518_POWER1_NO_BCLK, val); +} + +static struct snd_soc_codec_driver ssm2518_codec_driver = { + .probe = ssm2518_probe, + .remove = ssm2518_remove, + .set_bias_level = ssm2518_set_bias_level, + .set_sysclk = ssm2518_set_sysclk, + .idle_bias_off = true, + + .controls = ssm2518_snd_controls, + .num_controls = ARRAY_SIZE(ssm2518_snd_controls), + .dapm_widgets = ssm2518_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ssm2518_dapm_widgets), + .dapm_routes = ssm2518_routes, + .num_dapm_routes = ARRAY_SIZE(ssm2518_routes), +}; + +static bool ssm2518_register_volatile(struct device *dev, unsigned int reg) +{ + return false; +} + +static const struct regmap_config ssm2518_regmap_config = { + .val_bits = 8, + .reg_bits = 8, + + .max_register = SSM2518_REG_DRC_9, + .volatile_reg = ssm2518_register_volatile, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = ssm2518_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(ssm2518_reg_defaults), +}; + +static int ssm2518_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct ssm2518_platform_data *pdata = i2c->dev.platform_data; + struct ssm2518 *ssm2518; + int ret; + + ssm2518 = devm_kzalloc(&i2c->dev, sizeof(*ssm2518), GFP_KERNEL); + if (ssm2518 == NULL) + return -ENOMEM; + + if (pdata) { + ssm2518->enable_gpio = pdata->enable_gpio; + } else if (i2c->dev.of_node) { + ssm2518->enable_gpio = of_get_gpio(i2c->dev.of_node, 0); + if (ssm2518->enable_gpio == -EPROBE_DEFER) + return -EPROBE_DEFER; + } else { + ssm2518->enable_gpio = -1; + } + + if (gpio_is_valid(ssm2518->enable_gpio)) { + ret = devm_gpio_request_one(&i2c->dev, ssm2518->enable_gpio, + GPIOF_OUT_INIT_HIGH, "SSM2518 nSD"); + if (ret) + return ret; + } + + i2c_set_clientdata(i2c, ssm2518); + + ssm2518->regmap = devm_regmap_init_i2c(i2c, &ssm2518_regmap_config); + if (IS_ERR(ssm2518->regmap)) + return PTR_ERR(ssm2518->regmap); + + /* + * The reset bit is obviously volatile, but we need to be able to cache + * the other bits in the register, so we can't just mark the whole + * register as volatile. Since this is the only place where we'll ever + * touch the reset bit just bypass the cache for this operation. + */ + regcache_cache_bypass(ssm2518->regmap, true); + ret = regmap_write(ssm2518->regmap, SSM2518_REG_POWER1, + SSM2518_POWER1_RESET); + if (ret) + return ret; + regcache_cache_bypass(ssm2518->regmap, false); + + return snd_soc_register_codec(&i2c->dev, &ssm2518_codec_driver, + &ssm2518_dai, 1); +} + +static int ssm2518_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static const struct i2c_device_id ssm2518_i2c_ids[] = { + { "ssm2518", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ssm2518_i2c_ids); + +static struct i2c_driver ssm2518_driver = { + .driver = { + .name = "ssm2518", + .owner = THIS_MODULE, + }, + .probe = ssm2518_i2c_probe, + .remove = ssm2518_i2c_remove, + .id_table = ssm2518_i2c_ids, +}; +module_i2c_driver(ssm2518_driver); + +MODULE_DESCRIPTION("ASoC SSM2518 driver"); +MODULE_AUTHOR("Lars-Peter Clausen lars@metafoo.de"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ssm2518.h b/sound/soc/codecs/ssm2518.h new file mode 100644 index 0000000..62511d8 --- /dev/null +++ b/sound/soc/codecs/ssm2518.h @@ -0,0 +1,20 @@ +/* + * SSM2518 amplifier audio driver + * + * Copyright 2013 Analog Devices Inc. + * Author: Lars-Peter Clausen lars@metafoo.de + * + * Licensed under the GPL-2. + */ + +#ifndef __SND_SOC_CODECS_SSM2518_H__ +#define __SND_SOC_CODECS_SSM2518_H__ + +#define SSM2518_SYSCLK 0 + +enum ssm2518_sysclk_src { + SSM2518_SYSCLK_SRC_MCLK = 0, + SSM2518_SYSCLK_SRC_BCLK = 1, +}; + +#endif
On Wed, May 22, 2013 at 07:00:13PM +0200, Lars-Peter Clausen wrote:
This patch adds a ASoC CODEC driver for the SSM2516. The SSM2516 is a stereo Class-D audio amplifier with an I2S interface for audio in and a built-in dynamic range control processor.
I'll apply this but
- if (slots == 0) {
return regmap_update_bits(ssm2518->regmap,
SSM2518_REG_SAI_CTRL1, SSM2518_SAI_CTRL1_SAI_MASK,
SSM2518_SAI_CTRL1_SAI_I2S);
- }
You've got quite a few single statement if () blocks with { } which shouldn't be there.
- codec->control_data = ssm2518->regmap;
- ret = snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP);
- if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
return ret;
- }
- ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER2,
SSM2518_POWER2_APWDN, 0x00);
- if (ret)
return ret;
- return ssm2518_set_bias_level(codec, SND_SOC_BIAS_OFF);
The power down stuff shouild probably be done in the I2C probe so that the device is in a low power state if unused.
- switch (freq) {
- case 2048000:
Looks like the user can't select 0 for the SYSCLK, I'd expect that to be possible for systems that can reprogram the clock so that they can avoid having constraints set when they don't need them.
+static bool ssm2518_register_volatile(struct device *dev, unsigned int reg) +{
- return false;
+}
Hrm, this should be the default...
- } else if (i2c->dev.of_node) {
ssm2518->enable_gpio = of_get_gpio(i2c->dev.of_node, 0);
if (ssm2518->enable_gpio == -EPROBE_DEFER)
return -EPROBE_DEFER;
Why are other errors being ignored here?
On 05/22/2013 07:57 PM, Mark Brown wrote:
On Wed, May 22, 2013 at 07:00:13PM +0200, Lars-Peter Clausen wrote:
This patch adds a ASoC CODEC driver for the SSM2516. The SSM2516 is a stereo Class-D audio amplifier with an I2S interface for audio in and a built-in dynamic range control processor.
I'll apply this but
I'll send a v2 with your comments fixed.
- if (slots == 0) {
return regmap_update_bits(ssm2518->regmap,
SSM2518_REG_SAI_CTRL1, SSM2518_SAI_CTRL1_SAI_MASK,
SSM2518_SAI_CTRL1_SAI_I2S);
- }
You've got quite a few single statement if () blocks with { } which shouldn't be there.
I prefer to only do this for single single-line statements.
[...]
- switch (freq) {
- case 2048000:
Looks like the user can't select 0 for the SYSCLK, I'd expect that to be possible for systems that can reprogram the clock so that they can avoid having constraints set when they don't need them.
Makes sense.
- } else if (i2c->dev.of_node) {
ssm2518->enable_gpio = of_get_gpio(i2c->dev.of_node, 0);
if (ssm2518->enable_gpio == -EPROBE_DEFER)
return -EPROBE_DEFER;
Why are other errors being ignored here?
To make the property optional. But I think it might be better to only allow -ENOENT and treat everything else as an error in this case.
Thanks, - Lars
On Wed, May 22, 2013 at 08:16:36PM +0200, Lars-Peter Clausen wrote:
On 05/22/2013 07:57 PM, Mark Brown wrote:
- if (slots == 0) {
return regmap_update_bits(ssm2518->regmap,
SSM2518_REG_SAI_CTRL1, SSM2518_SAI_CTRL1_SAI_MASK,
SSM2518_SAI_CTRL1_SAI_I2S);
- }
You've got quite a few single statement if () blocks with { } which shouldn't be there.
I prefer to only do this for single single-line statements.
That's not the kernel coding style and I have to say these examples were all jumping out at me as weird, I was looking for an else clause or something.
participants (2)
-
Lars-Peter Clausen
-
Mark Brown