[alsa-devel] hda_analyzer vs alc668 asus NJ750k
Hi,
I get some errors running hda_analyzer with this alc668 chipset.
Traceback (most recent call last): File "/dev/shm/hda-analyzer/hda_analyzer.py", line 546, in <module> sys.exit(main(sys.argv)) File "/dev/shm/hda-analyzer/hda_analyzer.py", line 523, in main if read_nodes(sys.argv[1:]) == 0: File "/dev/shm/hda-analyzer/hda_analyzer.py", line 89, in read_nodes read_nodes2(c.card, i) File "/dev/shm/hda-analyzer/hda_analyzer.py", line 60, in read_nodes2 c = HDACodec(card, codec) File "/dev/shm/hda-analyzer/hda_codec.py", line 1041, in __init__ self.parse_proc() File "/dev/shm/hda-analyzer/hda_codec.py", line 1140, in parse_proc self.proc_codec = HDACodecProc(self.card, self.device, file) File "/dev/shm/hda-analyzer/hda_proc.py", line 479, in __init__ self.parse(proc_file) File "/dev/shm/hda-analyzer/hda_proc.py", line 677, in parse node.add_digital(line[11:]) File "/dev/shm/hda-analyzer/hda_proc.py", line 296, in add_digital self.wrongfile('unknown dig1 bit %s' % repr(b)) File "/dev/shm/hda-analyzer/hda_proc.py", line 143, in wrongfile raise ValueError, "wrong proc file format (%s)" % msg ValueError: wrong proc file format (unknown dig1 bit 'KAE')
If I disable the check for add_digital I get this error:
ValueError: wrong proc file format ( Digital: Enabled KAE)
- Is it a problem to add a new DIG1_BIT to hda_proc.py:277
def add_digital(self, line): bits = { 'Enabled': DIG1_BITS['ENABLE'], 'Validity': DIG1_BITS['VALIDITY'], 'ValidityCfg': DIG1_BITS['VALIDITYCFG'], 'Preemphasis': DIG1_BITS['EMPHASIS'], 'Copyright': DIG1_BITS['COPYRIGHT'], # old buggy format 'Non-Copyright': DIG1_BITS['COPYRIGHT'], 'Non-Audio': DIG1_BITS['NONAUDIO'], 'Pro': DIG1_BITS['PROFESSIONAL'], 'GenLevel': DIG1_BITS['LEVEL'], 'KAE': DIG1_BITS['KAE'], }
hda_codec.py:224
DIG1_BITS = { 'ENABLE': 0, 'VALIDITY': 1, 'VALIDITYCFG': 2, 'EMPHASIS': 3, 'COPYRIGHT': 4, 'NONAUDIO': 5, 'PROFESSIONAL': 6, 'LEVEL': 7, 'KAE': 8 }
- If I do that I get this error:
Traceback (most recent call last): File "hda_analyzer.py", line 546, in <module> sys.exit(main(sys.argv)) File "hda_analyzer.py", line 523, in main if read_nodes(sys.argv[1:]) == 0: File "hda_analyzer.py", line 89, in read_nodes read_nodes2(c.card, i) File "hda_analyzer.py", line 60, in read_nodes2 c = HDACodec(card, codec) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line 1043, in __init__ self.parse_proc() File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line 1142, in parse_proc self.proc_codec = HDACodecProc(self.card, self.device, file) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 480, in __init__ self.parse(proc_file) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 732, in parse self.wrongfile(line) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 143, in wrongfile raise ValueError, "wrong proc file format (%s)" % msg ValueError: wrong proc file format ( Devices: 0)
- If I replace the call in hda_proc.py:734 to self.wrongfile() with a print command
ex. else: print ('strange line : %s' % line) # self.wrongfile(line)
I get this output and hda_analyzer interface starts:
# python hda_analyzer.py strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04
- If I run "alsa-jack-sense-test -a" I get this output:
# python alsa-jack-sense-test.py -a strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 Pin 0x05 (Unknown Digital Out): present = No Pin 0x06 (Unknown Digital Out): present = No Pin 0x07 (Unknown Digital Out): present = No
-- Patrick Shirkey Boost Hardware Ltd
Hi,
I get some errors running hda_analyzer with this alc668 chipset.
Traceback (most recent call last): File "/dev/shm/hda-analyzer/hda_analyzer.py", line 546, in <module> sys.exit(main(sys.argv)) File "/dev/shm/hda-analyzer/hda_analyzer.py", line 523, in main if read_nodes(sys.argv[1:]) == 0: File "/dev/shm/hda-analyzer/hda_analyzer.py", line 89, in read_nodes read_nodes2(c.card, i) File "/dev/shm/hda-analyzer/hda_analyzer.py", line 60, in read_nodes2 c = HDACodec(card, codec) File "/dev/shm/hda-analyzer/hda_codec.py", line 1041, in __init__ self.parse_proc() File "/dev/shm/hda-analyzer/hda_codec.py", line 1140, in parse_proc self.proc_codec = HDACodecProc(self.card, self.device, file) File "/dev/shm/hda-analyzer/hda_proc.py", line 479, in __init__ self.parse(proc_file) File "/dev/shm/hda-analyzer/hda_proc.py", line 677, in parse node.add_digital(line[11:]) File "/dev/shm/hda-analyzer/hda_proc.py", line 296, in add_digital self.wrongfile('unknown dig1 bit %s' % repr(b)) File "/dev/shm/hda-analyzer/hda_proc.py", line 143, in wrongfile raise ValueError, "wrong proc file format (%s)" % msg ValueError: wrong proc file format (unknown dig1 bit 'KAE')
If I disable the check for add_digital I get this error:
ValueError: wrong proc file format ( Digital: Enabled KAE)
- Is it a problem to add a new DIG1_BIT to hda_proc.py:277
def add_digital(self, line): bits = { 'Enabled': DIG1_BITS['ENABLE'], 'Validity': DIG1_BITS['VALIDITY'], 'ValidityCfg': DIG1_BITS['VALIDITYCFG'], 'Preemphasis': DIG1_BITS['EMPHASIS'], 'Copyright': DIG1_BITS['COPYRIGHT'], # old buggy format 'Non-Copyright': DIG1_BITS['COPYRIGHT'], 'Non-Audio': DIG1_BITS['NONAUDIO'], 'Pro': DIG1_BITS['PROFESSIONAL'], 'GenLevel': DIG1_BITS['LEVEL'], 'KAE': DIG1_BITS['KAE'], }
hda_codec.py:224
DIG1_BITS = { 'ENABLE': 0, 'VALIDITY': 1, 'VALIDITYCFG': 2, 'EMPHASIS': 3, 'COPYRIGHT': 4, 'NONAUDIO': 5, 'PROFESSIONAL': 6, 'LEVEL': 7, 'KAE': 8 }
- If I do that I get this error:
Traceback (most recent call last): File "hda_analyzer.py", line 546, in <module> sys.exit(main(sys.argv)) File "hda_analyzer.py", line 523, in main if read_nodes(sys.argv[1:]) == 0: File "hda_analyzer.py", line 89, in read_nodes read_nodes2(c.card, i) File "hda_analyzer.py", line 60, in read_nodes2 c = HDACodec(card, codec) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line 1043, in __init__ self.parse_proc() File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line 1142, in parse_proc self.proc_codec = HDACodecProc(self.card, self.device, file) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 480, in __init__ self.parse(proc_file) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 732, in parse self.wrongfile(line) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 143, in wrongfile raise ValueError, "wrong proc file format (%s)" % msg ValueError: wrong proc file format ( Devices: 0)
- If I replace the call in hda_proc.py:734 to self.wrongfile() with a
print command
ex. else: print ('strange line : %s' % line) # self.wrongfile(line)
I get this output and hda_analyzer interface starts:
# python hda_analyzer.py strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04
- If I run "alsa-jack-sense-test -a" I get this output:
# python alsa-jack-sense-test.py -a strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 strange line : Devices: 0 strange line : In-driver Connection: 3 strange line : 0x02 0x03 0x04 Pin 0x05 (Unknown Digital Out): present = No Pin 0x06 (Unknown Digital Out): present = No Pin 0x07 (Unknown Digital Out): present = No
You need to specify card 1 if you want test the alc668
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pc...
The error is because codec.py cannot parse the output of hda_proc.c
On Wed, July 30, 2014 1:25 am, Raymond Yau wrote:
You need to specify card 1 if you want test the alc668
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pc...
The error is because codec.py cannot parse the output of hda_proc.c
I have tried a few options but the only things that allow the UI to run are the steps above.
For example If I revert the changes and run this commandline I get the same errors.
sudo python hda_analyzer.py /proc/asound/card1/codec#0
Traceback (most recent call last): File "hda_analyzer.py", line 546, in <module> sys.exit(main(sys.argv)) File "hda_analyzer.py", line 523, in main if read_nodes(sys.argv[1:]) == 0: File "hda_analyzer.py", line 89, in read_nodes read_nodes2(c.card, i) File "hda_analyzer.py", line 60, in read_nodes2 c = HDACodec(card, codec) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line 1041, in __init__ self.parse_proc() File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line 1140, in parse_proc self.proc_codec = HDACodecProc(self.card, self.device, file) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 479, in __init__ self.parse(proc_file) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 677, in parse node.add_digital(line[11:]) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 296, in add_digital self.wrongfile('unknown dig1 bit %s' % repr(b)) File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line 143, in wrongfile raise ValueError, "wrong proc file format (%s)" % msg ValueError: wrong proc file format (unknown dig1 bit 'KAE')
Apart from that the documentation on hda_analyzer is sparse and figuring out what to do with the interface will require several hours of my life.
Maybe I have missed something with the alsa-jack-sense-test script or one of the other python scripts but is it possible to script a tool that will try out every solution and figure out which pins should be enabled or are missing to achieve various results?
-- Patrick Shirkey Boost Hardware Ltd
At Tue, 29 Jul 2014 23:09:02 +1000 (EST), Patrick Shirkey wrote:
Hi,
I get some errors running hda_analyzer with this alc668 chipset.
Traceback (most recent call last): File "/dev/shm/hda-analyzer/hda_analyzer.py", line 546, in <module> sys.exit(main(sys.argv)) File "/dev/shm/hda-analyzer/hda_analyzer.py", line 523, in main if read_nodes(sys.argv[1:]) == 0: File "/dev/shm/hda-analyzer/hda_analyzer.py", line 89, in read_nodes read_nodes2(c.card, i) File "/dev/shm/hda-analyzer/hda_analyzer.py", line 60, in read_nodes2 c = HDACodec(card, codec) File "/dev/shm/hda-analyzer/hda_codec.py", line 1041, in __init__ self.parse_proc() File "/dev/shm/hda-analyzer/hda_codec.py", line 1140, in parse_proc self.proc_codec = HDACodecProc(self.card, self.device, file) File "/dev/shm/hda-analyzer/hda_proc.py", line 479, in __init__ self.parse(proc_file) File "/dev/shm/hda-analyzer/hda_proc.py", line 677, in parse node.add_digital(line[11:]) File "/dev/shm/hda-analyzer/hda_proc.py", line 296, in add_digital self.wrongfile('unknown dig1 bit %s' % repr(b)) File "/dev/shm/hda-analyzer/hda_proc.py", line 143, in wrongfile raise ValueError, "wrong proc file format (%s)" % msg ValueError: wrong proc file format (unknown dig1 bit 'KAE')
If I disable the check for add_digital I get this error:
ValueError: wrong proc file format ( Digital: Enabled KAE)
- Is it a problem to add a new DIG1_BIT to hda_proc.py:277
def add_digital(self, line): bits = { 'Enabled': DIG1_BITS['ENABLE'], 'Validity': DIG1_BITS['VALIDITY'], 'ValidityCfg': DIG1_BITS['VALIDITYCFG'], 'Preemphasis': DIG1_BITS['EMPHASIS'], 'Copyright': DIG1_BITS['COPYRIGHT'], # old buggy format 'Non-Copyright': DIG1_BITS['COPYRIGHT'], 'Non-Audio': DIG1_BITS['NONAUDIO'], 'Pro': DIG1_BITS['PROFESSIONAL'], 'GenLevel': DIG1_BITS['LEVEL'], 'KAE': DIG1_BITS['KAE'], }
hda_codec.py:224
DIG1_BITS = { 'ENABLE': 0, 'VALIDITY': 1, 'VALIDITYCFG': 2, 'EMPHASIS': 3, 'COPYRIGHT': 4, 'NONAUDIO': 5, 'PROFESSIONAL': 6, 'LEVEL': 7, 'KAE': 8 }
KAE belongs to DIG3, so shouldn't be there. I updated the git repo now.
While we are at it: it would make sense to move this from alsa to alsa-tools repo, IMO. Jaroslav, any objection?
The only question is the installation to the system, though.
Takashi
participants (3)
-
Patrick Shirkey -
Raymond Yau -
Takashi Iwai