[PATCH v2 2/2] ASoC: Adds support for TAS575x to the pcm512x driver
![](https://secure.gravatar.com/avatar/1b25ed8994538f3e0114a5be1e3d3d2c.jpg?s=120&d=mm&r=g)
Enables the existing pcm512x driver to control the almost compatible TAS5754 and -76 amplifers. Both amplifiers support only an I2C interface and the internal PLL must be always on to provide necessary clocks to the amplifier section. Tested on TAS5756 with support from Andreas Arbesser-Krasser from Texas Instruments a-krasser@ti.com
Signed-off-by: Joerg Schambacher joerg.hifiberry@gmail.com --- sound/soc/codecs/pcm512x-i2c.c | 4 ++++ sound/soc/codecs/pcm512x.c | 36 +++++++++++++++++++++++++++++++--- 2 files changed, 37 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/pcm512x-i2c.c b/sound/soc/codecs/pcm512x-i2c.c index 5cd2b64b9337..4be476a280e1 100644 --- a/sound/soc/codecs/pcm512x-i2c.c +++ b/sound/soc/codecs/pcm512x-i2c.c @@ -39,6 +39,8 @@ static const struct i2c_device_id pcm512x_i2c_id[] = { { "pcm5122", }, { "pcm5141", }, { "pcm5142", }, + { "tas5754", }, + { "tas5756", }, { } }; MODULE_DEVICE_TABLE(i2c, pcm512x_i2c_id); @@ -49,6 +51,8 @@ static const struct of_device_id pcm512x_of_match[] = { { .compatible = "ti,pcm5122", }, { .compatible = "ti,pcm5141", }, { .compatible = "ti,pcm5142", }, + { .compatible = "ti,tas5754", }, + { .compatible = "ti,tas5756", }, { } }; MODULE_DEVICE_TABLE(of, pcm512x_of_match); diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c index 89059a673cf0..aa8edf87b743 100644 --- a/sound/soc/codecs/pcm512x.c +++ b/sound/soc/codecs/pcm512x.c @@ -48,6 +48,7 @@ struct pcm512x_priv { int mute; struct mutex mutex; unsigned int bclk_ratio; + int force_pll_on; };
/* @@ -1258,10 +1259,34 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream, return ret; }
- ret = regmap_update_bits(pcm512x->regmap, PCM512x_PLL_EN, - PCM512x_PLLE, 0); + if (!pcm512x->force_pll_on) { + ret = regmap_update_bits(pcm512x->regmap, + PCM512x_PLL_EN, PCM512x_PLLE, 0); + } else { + /* provide minimum PLL config for TAS575x clocking + * and leave PLL enabled + */ + ret = regmap_write(pcm512x->regmap, + PCM512x_PLL_COEFF_0, 0x01); + if (ret != 0) { + dev_err(component->dev, + "Failed to set pll coefficient: %d\n", ret); + return ret; + } + ret = regmap_write(pcm512x->regmap, + PCM512x_PLL_COEFF_1, 0x04); + if (ret != 0) { + dev_err(component->dev, + "Failed to set pll coefficient: %d\n", ret); + return ret; + } + ret = regmap_write(pcm512x->regmap, + PCM512x_PLL_EN, 0x01); + dev_dbg(component->dev, "Enabling PLL for TAS575x\n"); + } + if (ret != 0) { - dev_err(component->dev, "Failed to disable pll: %d\n", ret); + dev_err(component->dev, "Failed to set pll mode: %d\n", ret); return ret; } } @@ -1659,6 +1684,11 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap) ret = -EINVAL; goto err_pm; } + + if (!strcmp(np->name, "tas5756") || + !strcmp(np->name, "tas5754")) + pcm512x->force_pll_on = 1; + dev_dbg(dev, "Device ID: %s\n", np->name); } #endif
![](https://secure.gravatar.com/avatar/d930951cb00393ecf9c3db3a56d78fa9.jpg?s=120&d=mm&r=g)
On Fri, 29 Sep 2023 17:07:20 +0200, Joerg Schambacher wrote:
Enables the existing pcm512x driver to control the almost compatible TAS5754 and -76 amplifers. Both amplifiers support only an I2C interface and the internal PLL must be always on to provide necessary clocks to the amplifier section. Tested on TAS5756 with support from Andreas Arbesser-Krasser from Texas Instruments a-krasser@ti.com
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[2/2] ASoC: Adds support for TAS575x to the pcm512x driver commit: 1f817805262c2c34142291da376d4932d3c493bc
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Joerg Schambacher
-
Mark Brown