As DMA framework request DMA using direction only in prep_slave function, (The At91 xdma driver has adapted to this request). So won't check direction when do DMA configuration.

Signed-off-by: Bo Shen voice.shen@atmel.com ---

sound/soc/atmel/atmel-pcm-dma.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/sound/soc/atmel/atmel-pcm-dma.c b/sound/soc/atmel/atmel-pcm-dma.c index 33fb3bb..b8e7bad 100644 --- a/sound/soc/atmel/atmel-pcm-dma.c +++ b/sound/soc/atmel/atmel-pcm-dma.c @@ -105,13 +105,11 @@ static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream, return ret; }

- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - slave_config->dst_addr = ssc->phybase + SSC_THR; - slave_config->dst_maxburst = 1; - } else { - slave_config->src_addr = ssc->phybase + SSC_RHR; - slave_config->src_maxburst = 1; - } + slave_config->dst_addr = ssc->phybase + SSC_THR; + slave_config->dst_maxburst = 1; + + slave_config->src_addr = ssc->phybase + SSC_RHR; + slave_config->src_maxburst = 1;

prtd->dma_intr_handler = atmel_pcm_dma_irq;