json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax.

Signed-off-by: Rob Herring robh@kernel.org --- .../devicetree/bindings/arm/cpus.yaml | 81 +++--- .../devicetree/bindings/arm/l2c2x0.yaml | 87 +++--- .../devicetree/bindings/arm/psci.yaml | 15 +- .../bindings/arm/samsung/exynos-chipid.yaml | 5 +- .../bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/clock/fixed-factor-clock.yaml | 5 +- .../bindings/connector/usb-connector.yaml | 28 +- .../bindings/crypto/st,stm32-hash.yaml | 9 +- .../allwinner,sun4i-a10-display-engine.yaml | 7 +- .../display/allwinner,sun4i-a10-tcon.yaml | 5 +- .../bindings/display/panel/panel-common.yaml | 5 +- .../devicetree/bindings/dma/dma-common.yaml | 3 +- .../devicetree/bindings/dma/ti/k3-udma.yaml | 18 +- .../devicetree/bindings/eeprom/at24.yaml | 11 +- .../devicetree/bindings/example-schema.yaml | 17 +- .../bindings/hwmon/adi,ltc2947.yaml | 32 +-- .../devicetree/bindings/hwmon/ti,tmp513.yaml | 21 +- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 9 +- .../bindings/iio/adc/adi,ad7124.yaml | 5 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 3 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 7 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 31 +- .../bindings/iio/light/tsl2772.yaml | 13 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 56 ++-- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 5 +- .../devicetree/bindings/input/input.yaml | 9 +- .../interrupt-controller/arm,gic-v3.yaml | 39 ++- .../devicetree/bindings/iommu/arm,smmu.yaml | 3 +- .../devicetree/bindings/leds/common.yaml | 13 +- .../devicetree/bindings/leds/leds-gpio.yaml | 3 +- .../bindings/leds/rohm,bd71828-leds.yaml | 10 +- .../bindings/mailbox/st,stm32-ipcc.yaml | 5 +- .../bindings/media/amlogic,gx-vdec.yaml | 6 +- .../media/amlogic,meson-gx-ao-cec.yaml | 3 +- .../devicetree/bindings/media/rc.yaml | 265 +++++++++--------- .../bindings/media/renesas,vin.yaml | 7 +- .../memory-controllers/exynos-srom.yaml | 14 +- .../nvidia,tegra124-emc.yaml | 9 +- .../nvidia,tegra124-mc.yaml | 3 +- .../nvidia,tegra30-emc.yaml | 9 +- .../memory-controllers/nvidia,tegra30-mc.yaml | 3 +- .../bindings/mfd/allwinner,sun4i-a10-ts.yaml | 20 +- .../bindings/mfd/st,stm32-timers.yaml | 33 ++- .../devicetree/bindings/mfd/st,stpmic1.yaml | 9 +- .../devicetree/bindings/mfd/syscon.yaml | 5 +- .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 4 +- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 77 +++-- .../bindings/mmc/mmc-controller.yaml | 37 ++- .../bindings/mmc/rockchip-dw-mshc.yaml | 6 +- .../bindings/mmc/synopsys-dw-mshc-common.yaml | 14 +- .../mtd/allwinner,sun4i-a10-nand.yaml | 13 +- .../bindings/mtd/nand-controller.yaml | 27 +- .../bindings/net/can/bosch,m_can.yaml | 59 ++-- .../bindings/net/ethernet-controller.yaml | 34 +-- .../devicetree/bindings/net/qca,ar803x.yaml | 17 +- .../devicetree/bindings/net/snps,dwmac.yaml | 22 +- .../bindings/net/ti,cpsw-switch.yaml | 3 +- .../bindings/net/ti,davinci-mdio.yaml | 7 +- .../bindings/pci/intel-gw-pcie.yaml | 7 +- .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 12 +- .../pinctrl/aspeed,ast2400-pinctrl.yaml | 37 ++- .../pinctrl/aspeed,ast2500-pinctrl.yaml | 45 ++- .../pinctrl/aspeed,ast2600-pinctrl.yaml | 108 ++++--- .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml | 31 +- .../bindings/pinctrl/intel,lgm-io.yaml | 4 +- .../bindings/pinctrl/pinmux-node.yaml | 3 +- .../bindings/pinctrl/st,stm32-pinctrl.yaml | 56 ++-- .../bindings/power/amlogic,meson-ee-pwrc.yaml | 3 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 11 +- .../bindings/regulator/gpio-regulator.yaml | 35 ++- .../bindings/regulator/mps,mpq7920.yaml | 31 +- .../bindings/regulator/regulator.yaml | 5 +- .../regulator/rohm,bd71828-regulator.yaml | 34 +-- .../bindings/regulator/st,stm32-booster.yaml | 3 +- .../regulator/st,stm32mp1-pwr-reg.yaml | 3 +- .../bindings/remoteproc/st,stm32-rproc.yaml | 9 +- .../bindings/reset/intel,rcu-gw.yaml | 3 +- .../devicetree/bindings/riscv/cpus.yaml | 20 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 9 +- .../devicetree/bindings/serial/pl011.yaml | 10 +- .../devicetree/bindings/serial/rs485.yaml | 26 +- .../bindings/serial/samsung_uart.yaml | 5 +- .../bindings/sound/adi,adau7118.yaml | 20 +- .../sound/allwinner,sun4i-a10-codec.yaml | 41 ++- .../bindings/sound/qcom,wcd934x.yaml | 3 +- .../bindings/spi/renesas,sh-msiof.yaml | 42 ++- .../bindings/spi/spi-controller.yaml | 14 +- .../devicetree/bindings/spi/spi-pl022.yaml | 55 ++-- .../devicetree/bindings/spi/spi-sifive.yaml | 14 +- .../bindings/thermal/qcom-tsens.yaml | 7 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 7 +- 91 files changed, 881 insertions(+), 1103 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index a01814765ddb..3338bae4cee3 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -171,49 +171,48 @@ properties: - qcom,scorpion

enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: + $ref: '/schemas/types.yaml#/definitions/string' + oneOf: # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table + - enum: + - psci + - spin-table # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - aspeed,ast2600-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - marvell,mmp3-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - ti,am3352 - - ti,am4372 + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - aspeed,ast2600-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - marvell,mmp3-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + - ti,am3352 + - ti,am4372

cpu-release-addr: $ref: '/schemas/types.yaml#/definitions/uint64' diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml index 5d1d50eea26e..6b8f4d4fa580 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml @@ -70,43 +70,39 @@ properties: description: Cycles of latency for Data RAM accesses. Specifies 3 cells of read, write and setup latencies. Minimum valid values are 1. Controllers without setup latency control should use a value of 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - minimum: 0 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8

arm,tag-latency: description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of read, write and setup latencies. Controllers without setup latency control should use 0. Controllers without separate read and write Tag RAM latency values should only use the first cell. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 3 - items: - minimum: 0 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 8

arm,dirty-latency: description: Cycles of latency for Dirty RAMs. This is a single cell. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 8

arm,filter-ranges: description: <start length> Starting address and length of window to filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2

arm,io-coherent: description: indicates that the system is operating in an hardware @@ -131,36 +127,31 @@ properties: arm,double-linefill: description: Override double linefill enable setting. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

arm,double-linefill-incr: description: Override double linefill on INCR read. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

arm,double-linefill-wrap: description: Override double linefill on WRAP read. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

arm,prefetch-drop: description: Override prefetch drop enable setting. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

arm,prefetch-offset: description: Override prefetch offset value. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]

arm,shared-override: description: The default behavior of the L220 or PL310 cache @@ -193,35 +184,31 @@ properties: description: | Data prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

prefetch-instr: description: | Instruction prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

arm,dynamic-clock-gating: description: | L2 dynamic clock gating. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

arm,standby-mode: description: L2 standby mode enable. Value <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

arm,early-bresp-disable: description: Disable the CA9 optimization Early BRESP (PL310) diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 9247b58c26fc..4f9b361aefd6 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -69,13 +69,12 @@ properties:

method: description: The method of calling the PSCI firmware. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - enum: - # SMC #0, with the register assignments specified in this binding. - - smc + $ref: /schemas/types.yaml#/definitions/string-array + enum: + + - smc # HVC #0, with the register assignments specified in this binding. - - hvc + - hvc

cpu_suspend: $ref: /schemas/types.yaml#/definitions/uint32 @@ -107,8 +106,8 @@ properties:

patternProperties: "^power-domain-": - allOf: - - $ref: "../power/power-domain.yaml#" + $ref: "../power/power-domain.yaml#" + type: object description: | ARM systems can have multiple cores, sometimes in an hierarchical diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml index 0425d333b50d..f99c0c6df21b 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml @@ -22,9 +22,8 @@ properties: Adaptive Supply Voltage bin selection. This can be used to determine the ASV bin of an SoC if respective information is missing in the CHIPID registers or in the OTP memory. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3]

required: - compatible diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index f0b3d30fbb76..0503651cd214 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -31,12 +31,11 @@ properties: maxItems: 1

allwinner,sram: - allOf: - - $ref: /schemas/types.yaml#definitions/phandle-array - - maxItems: 1 description: The SRAM that needs to be claimed to access the display engine bus. + $ref: /schemas/types.yaml#definitions/phandle-array + maxItems: 1

ranges: true

diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml index b567f8092f8c..f415845b38dd 100644 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml @@ -24,9 +24,8 @@ properties:

clock-div: description: Fixed divider - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1

clock-mult: description: Fixed multiplier diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 369c58e22a06..03b92b6f35fa 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -27,8 +27,8 @@ properties: description: Size of the connector, should be specified in case of non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible connectors. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - mini - micro @@ -57,8 +57,8 @@ properties: power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - source - sink @@ -66,18 +66,18 @@ properties:

try-power-role: description: Preferred power role. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - - source - - sink - - dual + - source + - sink + - dual

data-role: description: Data role if Type C connector supports USB data. "dual" refers Dual Role Device (DRD). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - host - device @@ -95,8 +95,7 @@ properties: defined in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array

sink-pdos: description: An array of u32 with each entry providing supported power sink @@ -108,8 +107,7 @@ properties: in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array

op-sink-microwatt: description: Sink required operating power in microwatt, if source can't diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index 57ae1c0b6d18..6dd658f0912c 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -36,11 +36,10 @@ properties:

dma-maxburst: description: Set number of maximum dma burst supported - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 2 - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0

required: - compatible diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml index 944ff2f1cf93..e77523b02fad 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -66,10 +66,9 @@ properties: - allwinner,sun50i-h6-display-engine

allwinner,pipelines: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available. diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 87cb77b32ee3..4c15a2644a7c 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -71,11 +71,10 @@ properties: maxItems: 4

clock-output-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - maxItems: 1 description: Name of the LCD pixel clock created. + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 1

dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index ed051ba12084..b05573de08f3 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -48,9 +48,8 @@ properties: rotation: description: Display rotation in degrees counter clockwise (0,90,180,270) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 90, 180, 270 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 90, 180, 270]

# Display Timings panel-timing: diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index 02a34ba2b49b..c36592683340 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -31,8 +31,7 @@ properties: kernel. i.e. first channel corresponds to LSB. The first item in the array is for channels 0-31, the second is for channels 32-63, etc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 1 # Should be enough diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 85056982a242..10b74095935f 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -78,25 +78,21 @@ properties:

ti,sci: description: phandle to TI-SCI compatible System controller node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle

ti,sci-dev-id: description: TI-SCI device id of UDMAP - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32

ti,ringacc: description: phandle to the ring accelerator node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle

ti,sci-rm-range-tchan: description: | Array of UDMA tchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 @@ -105,8 +101,7 @@ properties: description: | Array of UDMA rchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 @@ -115,8 +110,7 @@ properties: description: | Array of UDMA rflow resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index a15787e504f0..de513fe333a7 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -118,14 +118,13 @@ properties: maxItems: 1

pagesize: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The length of the pagesize for writing. Please consult the manual of your device, that value varies a lot. A wrong value may result in data loss! If not specified, a safety value of '1' is used which will be very slow. - enum: [ 1, 8, 16, 32, 64, 128, 258 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 8, 16, 32, 64, 128, 258] default: 1

read-only: @@ -148,18 +147,16 @@ properties: wp-gpios: true

address-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of address bits. + $ref: /schemas/types.yaml#/definitions/uint32 default: 8 enum: [ 8, 16 ]

num-addresses: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Total number of i2c slave addresses this device takes. + $ref: /schemas/types.yaml#/definitions/uint32 default: 1 minimum: 1 maximum: 8 diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 62811a1b5058..c9534d2164a2 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -138,12 +138,8 @@ properties: # 'description'. vendor,int-property: description: Vendor specific properties must have a description - # 'allOf' is the json-schema way of subclassing a schema. Here the base - # type schema is referenced and then additional constraints on the values - # are added. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 4, 6, 8, 10] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10]

vendor,bool-property: description: Vendor specific properties must have a description. Boolean @@ -154,11 +150,10 @@ properties: vendor,string-array-property: description: Vendor specific properties should reference a type in the core schema. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - - enum: [ foo, bar ] - - enum: [ baz, boo ] + $ref: /schemas/types.yaml#/definitions/string-array + items: + - enum: [foo, bar] + - enum: [baz, boo]

vendor,property-in-standard-units-microvolt: description: Vendor specific properties having a standard unit suffix diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 44a63fffb4be..eef614962b10 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -38,20 +38,18 @@ properties: the accumulated values, this entry can also have two items which sets energy1/charge1 and energy2/charger2 respectively. Check table 12 of the datasheet for more information on the supported options. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2, 3] + default: 0

adi,accumulation-deadband-microamp: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0

@@ -61,8 +59,7 @@ properties: active high, setting it to zero makets it active low. When this property is present, the GPIO is automatically configured as output and set to control a fan as a function of measured temperature. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] default: 0

@@ -74,13 +71,12 @@ properties: registers. Check table 13 of the datasheet for more information on the supported options. This property cannot be used together with adi,gpio-out-pol. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2] + default: 0

required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 3f043e943668..90b2fa3f7752 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -45,16 +45,14 @@ properties: The gain value for the PGA function. This is 8, 4, 2 or 1. The PGA gain affect the shunt voltage range. The range will be equal to: pga-gain * 40mV - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] default: 8

ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000

@@ -63,14 +61,13 @@ properties: Array of three(TMP513) or two(TMP512) n-Factor value for each remote temperature channel. See datasheet Table 11 for n-Factor range list and value interpretation. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - default: 0x00 - minimum: 0x00 - maximum: 0xFF + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + default: 0x00 + minimum: 0x00 + maximum: 0xFF

required: - compatible diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index 900ec1ab6a47..96630f225207 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -30,11 +30,10 @@ allOf: Fast Mode Plus speed is selected by slave. Format is phandle to syscfg / register offset within syscfg / register bitmask for FMP bit. - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3

- if: properties: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index 97087a45ce54..deb34deff0e8 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -83,9 +83,8 @@ patternProperties: 1: REFIN2(+)/REFIN2(−). 3: AVDD If this field is left empty, internal reference is selected. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3]

diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 97f521d654ea..6a991e9f78e2 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -18,8 +18,7 @@ properties:

vref-supply: description: phandle to an external regulator providing the reference voltage - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle

reg: description: spi chipselect number according to the usual spi bindings diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 8ffeceb6abae..95ab285f4eba 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -38,10 +38,9 @@ properties:

microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0

vref-supply: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index b1627441a0b2..d69ca492d020 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -95,16 +95,14 @@ patternProperties: On stm32h7 and stm32mp1: - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 7

st,adc-channel-names: description: List of single-ended channel names. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array

st,filter-order: description: | @@ -112,11 +110,10 @@ patternProperties: - 0: FastSinC - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - items: - minimum: 0 - maximum: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 5

"#io-channel-cells": const: 1 @@ -129,9 +126,8 @@ patternProperties: - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 items: - enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + enum: [SPI_R, SPI_F, MANCH_R, MANCH_F] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array

st,adc-channel-clk-src: description: | @@ -141,9 +137,8 @@ patternProperties: - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). items: - enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R] + $ref: /schemas/types.yaml#/definitions/non-unique-string-array

st,adc-alt-channel: description: diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml index e8f7d1ada57b..d81229857944 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -33,13 +33,12 @@ properties:

amstaos,proximity-diodes: description: Proximity diodes to enable - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1

interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 8fb46de6641d..9480ede59c37 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -42,10 +42,9 @@ properties: 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2

'#address-cells': const: 1 @@ -91,8 +90,7 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9

@@ -121,8 +119,7 @@ patternProperties: more details look at table 69 and 70. Note should be signed, but dtc doesn't currently maintain the sign. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -138,8 +135,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a diode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 28

adi,single-ended: @@ -196,8 +192,7 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18

@@ -210,9 +205,8 @@ patternProperties: description: Identifies the number of wires used by the RTD. Setting this property to 5 means 4 wires with Kelvin Rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 3, 4, 5] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5]

adi,rsense-share: description: @@ -237,18 +231,16 @@ patternProperties: description: This property set the RTD curve used and the corresponding Callendar-VanDusen constants. Look at table 30 of the datasheet. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3

adi,custom-rtd: description: This is a table, where each entry should be a pair of resistance(ohm)-temperature(K). The entries added here are in uohm and uK. For more details values look at table 74 and 75. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix items: minItems: 3 maxItems: 64 @@ -280,8 +272,7 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27

@@ -314,10 +305,9 @@ patternProperties: This property controls the magnitude of the excitation current applied to the thermistor. Value 0 set's the sensor in auto-range mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, - 250000, 500000, 1000000] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000]

adi,custom-thermistor: description: @@ -325,8 +315,7 @@ patternProperties: resistance(ohm)-temperature(K). The entries added here are in uohm and uK only for custom thermistors. For more details look at table 78 and 79. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -339,8 +328,7 @@ patternProperties: be programmed into the device memory using this property. For Steinhart sensors the coefficients are given in the raw format. Look at table 82 for more information. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 6 maxItems: 6 @@ -358,8 +346,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a direct adc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 30

adi,single-ended: @@ -379,8 +366,7 @@ patternProperties:

adi,sensor-type: description: Identifies the sensor as a rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 29

adi,rsense-val-milli-ohms: diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 512a6af5aa42..cffd02028d02 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -42,9 +42,8 @@ patternProperties: description: Keycode to emit

channel: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] description: ADC Channel this key is attached to

voltage: diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 6d519046b3af..8edcb3c31270 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -18,11 +18,10 @@ properties: description: Specifies an array of numeric keycode values to be used for reporting button presses. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 0xff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 0xff

poll-interval: description: Poll interval time in milliseconds. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 66aacd106503..1ecd1831cf02 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -91,18 +91,16 @@ properties: description: If using padding pages, specifies the stride of consecutive redistributors. Must be a multiple of 64kB. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64 - - multipleOf: 0x10000 - exclusiveMinimum: 0 + $ref: /schemas/types.yaml#/definitions/uint64 + multipleOf: 0x10000 + exclusiveMinimum: 0

"#redistributor-regions": description: The number of independent contiguous regions occupied by the redistributors. Required if more than one such region is present. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 4096 # Should be enough? + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4096

msi-controller: description: @@ -114,22 +112,20 @@ properties: A list of pairs <intid span>, where "intid" is the first SPI of a range that can be used an MBI, and "span" the size of that range. Multiple ranges can be provided. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2

mbi-alias: description: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + maxItems: 2

ppi-partitions: type: object @@ -188,11 +184,10 @@ patternProperties: description: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2

required: - compatible diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 6515dbe47508..3aa554878b90 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -56,8 +56,7 @@ properties:

'#global-interrupts': description: The number of global interrupts exposed by the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 4c270fde4567..a2a541bca73c 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -41,8 +41,7 @@ properties: Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_COLOR_ID available, add a new one. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#definitions/uint32 minimum: 0 maximum: 8

@@ -67,8 +66,7 @@ properties: produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string enum: - on - off @@ -79,8 +77,8 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: # LED will act as a back-light, controlled by the framebuffer system - backlight @@ -111,8 +109,7 @@ properties: brightness and duration (in ms). The exact format is described in: Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-matrix + $ref: /schemas/types.yaml#definitions/uint32-matrix items: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml index 0e75b185dd19..7ad2baeda0b0 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml +++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml @@ -24,8 +24,7 @@ patternProperties: "(^led-[0-9a-f]$|led)": type: object

- allOf: - - $ref: common.yaml# + $ref: common.yaml#

properties: gpios: diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml index 90edf9d33b33..aa715edd93b0 100644 --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -34,11 +34,11 @@ patternProperties: #- $ref: "common.yaml#" rohm,led-compatible: description: LED identification string - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - bd71828-ambled - - bd71828-grnled + $ref: "/schemas/types.yaml#/definitions/string" + enum: + + - bd71828-ambled + - bd71828-grnled function: description: Purpose of LED as defined in dt-bindings/leds/common.h diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml index db851541d619..3b7ab61a144f 100644 --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -49,9 +49,8 @@ properties:

st,proc-id: description: Processor id using the mailbox (0 or 1) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1]

required: - compatible diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 5a1da4029c37..b902495d278b 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -77,13 +77,11 @@ properties:

amlogic,ao-sysctrl: description: should point to the AOBUS sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle

amlogic,canvas: description: should point to a canvas provider node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle

allOf: - if: diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml index 95ffa8bc0533..c08e2ddf292a 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml @@ -35,8 +35,7 @@ properties:

hdmi-phandle: description: phandle to the HDMI controller - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle

allOf: - if: diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index b27c9385d490..ded2ac43237d 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -18,136 +18,135 @@ properties: description: Specifies the scancode/key mapping table defined in-kernel for the remote controller. - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - enum: - - rc-adstech-dvb-t-pci - - rc-alink-dtu-m - - rc-anysee - - rc-apac-viewcomp - - rc-astrometa-t2hybrid - - rc-asus-pc39 - - rc-asus-ps3-100 - - rc-ati-tv-wonder-hd-600 - - rc-ati-x10 - - rc-avermedia - - rc-avermedia-a16d - - rc-avermedia-cardbus - - rc-avermedia-dvbt - - rc-avermedia-m135a - - rc-avermedia-m733a-rm-k6 - - rc-avermedia-rm-ks - - rc-avertv-303 - - rc-azurewave-ad-tu700 - - rc-beelink-gs1 - - rc-behold - - rc-behold-columbus - - rc-budget-ci-old - - rc-cec - - rc-cinergy - - rc-cinergy-1400 - - rc-d680-dmb - - rc-delock-61959 - - rc-dib0700-nec - - rc-dib0700-rc5 - - rc-digitalnow-tinytwin - - rc-digittrade - - rc-dm1105-nec - - rc-dntv-live-dvb-t - - rc-dntv-live-dvbt-pro - - rc-dtt200u - - rc-dvbsky - - rc-dvico-mce - - rc-dvico-portable - - rc-em-terratec - - rc-empty - - rc-encore-enltv - - rc-encore-enltv-fm53 - - rc-encore-enltv2 - - rc-evga-indtube - - rc-eztv - - rc-flydvb - - rc-flyvideo - - rc-fusionhdtv-mce - - rc-gadmei-rm008z - - rc-geekbox - - rc-genius-tvgo-a11mce - - rc-gotview7135 - - rc-hauppauge - - rc-hisi-poplar - - rc-hisi-tv-demo - - rc-imon-mce - - rc-imon-pad - - rc-imon-rsc - - rc-iodata-bctv7e - - rc-it913x-v1 - - rc-it913x-v2 - - rc-kaiomy - - rc-khadas - - rc-kworld-315u - - rc-kworld-pc150u - - rc-kworld-plus-tv-analog - - rc-leadtek-y04g0051 - - rc-lme2510 - - rc-manli - - rc-medion-x10 - - rc-medion-x10-digitainer - - rc-medion-x10-or2x - - rc-msi-digivox-ii - - rc-msi-digivox-iii - - rc-msi-tvanywhere - - rc-msi-tvanywhere-plus - - rc-nebula - - rc-nec-terratec-cinergy-xs - - rc-norwood - - rc-npgtech - - rc-odroid - - rc-pctv-sedna - - rc-pinnacle-color - - rc-pinnacle-grey - - rc-pinnacle-pctv-hd - - rc-pixelview - - rc-pixelview-002t - - rc-pixelview-mk12 - - rc-pixelview-new - - rc-powercolor-real-angel - - rc-proteus-2309 - - rc-purpletv - - rc-pv951 - - rc-rc5-tv - - rc-rc6-mce - - rc-real-audio-220-32-keys - - rc-reddo - - rc-snapstream-firefly - - rc-streamzap - - rc-su3000 - - rc-tango - - rc-tanix-tx3mini - - rc-tanix-tx5max - - rc-tbs-nec - - rc-technisat-ts35 - - rc-technisat-usb2 - - rc-terratec-cinergy-c-pci - - rc-terratec-cinergy-s2-hd - - rc-terratec-cinergy-xs - - rc-terratec-slim - - rc-terratec-slim-2 - - rc-tevii-nec - - rc-tivo - - rc-total-media-in-hand - - rc-total-media-in-hand-02 - - rc-trekstor - - rc-tt-1500 - - rc-twinhan-dtv-cab-ci - - rc-twinhan1027 - - rc-videomate-k100 - - rc-videomate-s350 - - rc-videomate-tv-pvr - - rc-videostrong-kii-pro - - rc-wetek-hub - - rc-wetek-play2 - - rc-winfast - - rc-winfast-usbii-deluxe - - rc-x96max - - rc-xbox-dvd - - rc-zx-irdec + $ref: '/schemas/types.yaml#/definitions/string' + enum: + - rc-adstech-dvb-t-pci + - rc-alink-dtu-m + - rc-anysee + - rc-apac-viewcomp + - rc-astrometa-t2hybrid + - rc-asus-pc39 + - rc-asus-ps3-100 + - rc-ati-tv-wonder-hd-600 + - rc-ati-x10 + - rc-avermedia + - rc-avermedia-a16d + - rc-avermedia-cardbus + - rc-avermedia-dvbt + - rc-avermedia-m135a + - rc-avermedia-m733a-rm-k6 + - rc-avermedia-rm-ks + - rc-avertv-303 + - rc-azurewave-ad-tu700 + - rc-beelink-gs1 + - rc-behold + - rc-behold-columbus + - rc-budget-ci-old + - rc-cec + - rc-cinergy + - rc-cinergy-1400 + - rc-d680-dmb + - rc-delock-61959 + - rc-dib0700-nec + - rc-dib0700-rc5 + - rc-digitalnow-tinytwin + - rc-digittrade + - rc-dm1105-nec + - rc-dntv-live-dvb-t + - rc-dntv-live-dvbt-pro + - rc-dtt200u + - rc-dvbsky + - rc-dvico-mce + - rc-dvico-portable + - rc-em-terratec + - rc-empty + - rc-encore-enltv + - rc-encore-enltv-fm53 + - rc-encore-enltv2 + - rc-evga-indtube + - rc-eztv + - rc-flydvb + - rc-flyvideo + - rc-fusionhdtv-mce + - rc-gadmei-rm008z + - rc-geekbox + - rc-genius-tvgo-a11mce + - rc-gotview7135 + - rc-hauppauge + - rc-hisi-poplar + - rc-hisi-tv-demo + - rc-imon-mce + - rc-imon-pad + - rc-imon-rsc + - rc-iodata-bctv7e + - rc-it913x-v1 + - rc-it913x-v2 + - rc-kaiomy + - rc-khadas + - rc-kworld-315u + - rc-kworld-pc150u + - rc-kworld-plus-tv-analog + - rc-leadtek-y04g0051 + - rc-lme2510 + - rc-manli + - rc-medion-x10 + - rc-medion-x10-digitainer + - rc-medion-x10-or2x + - rc-msi-digivox-ii + - rc-msi-digivox-iii + - rc-msi-tvanywhere + - rc-msi-tvanywhere-plus + - rc-nebula + - rc-nec-terratec-cinergy-xs + - rc-norwood + - rc-npgtech + - rc-odroid + - rc-pctv-sedna + - rc-pinnacle-color + - rc-pinnacle-grey + - rc-pinnacle-pctv-hd + - rc-pixelview + - rc-pixelview-002t + - rc-pixelview-mk12 + - rc-pixelview-new + - rc-powercolor-real-angel + - rc-proteus-2309 + - rc-purpletv + - rc-pv951 + - rc-rc5-tv + - rc-rc6-mce + - rc-real-audio-220-32-keys + - rc-reddo + - rc-snapstream-firefly + - rc-streamzap + - rc-su3000 + - rc-tango + - rc-tanix-tx3mini + - rc-tanix-tx5max + - rc-tbs-nec + - rc-technisat-ts35 + - rc-technisat-usb2 + - rc-terratec-cinergy-c-pci + - rc-terratec-cinergy-s2-hd + - rc-terratec-cinergy-xs + - rc-terratec-slim + - rc-terratec-slim-2 + - rc-tevii-nec + - rc-tivo + - rc-total-media-in-hand + - rc-total-media-in-hand-02 + - rc-trekstor + - rc-tt-1500 + - rc-twinhan-dtv-cab-ci + - rc-twinhan1027 + - rc-videomate-k100 + - rc-videomate-s350 + - rc-videomate-tv-pvr + - rc-videostrong-kii-pro + - rc-wetek-hub + - rc-wetek-play2 + - rc-winfast + - rc-winfast-usbii-deluxe + - rc-x96max + - rc-xbox-dvd + - rc-zx-irdec diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index ecc09f1124d4..6d473cdcb16a 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -116,10 +116,9 @@ properties: #The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15

ports: type: object diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml index cdfe3f7f0ea9..0dc008e816e2 100644 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -51,11 +51,10 @@ patternProperties: maxItems: 1

reg-io-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2] description: Data width in bytes (1 or 2). If omitted, default of 1 is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2]

samsung,srom-page-mode: description: @@ -64,11 +63,10 @@ patternProperties: type: boolean

samsung,srom-timing: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 6 - maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 6 + maxItems: 6 description: | Array of 6 integers, specifying bank timings in the following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs. diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index 3e0a8a92d652..a3b36dea88b6 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -73,10 +73,9 @@ patternProperties: timings

nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: pad calibration interval in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151

@@ -136,11 +135,10 @@ patternProperties: value of the EMC_XM2DQSPADCTRL2 register for this set of timings

nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: number of EMC clocks to wait before issuing any commands after clock change + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023

@@ -150,12 +148,11 @@ patternProperties: value of the EMC_ZCAL_INTERVAL register for this set of timings

nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFC diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml index 22a94b6fdbde..30d9fb193d7f 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml @@ -60,8 +60,7 @@ patternProperties: maximum: 1066000000

nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "15.6.1 MC Registers" in the TRM. diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml index e4135bac6957..112bae2fcbbd 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml @@ -56,10 +56,9 @@ patternProperties: maximum: 900000000

nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Pad calibration interval in microseconds. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151

@@ -79,11 +78,10 @@ patternProperties: Mode Register 0.

nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of EMC clocks to wait before issuing any commands after sending ZCAL_MRW_CMD. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023

@@ -98,12 +96,11 @@ patternProperties: FBIO "read" FIFO periodic resetting enabled.

nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "18.13.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFC diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml index 4b9196c83291..84fd57bcf0dc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml @@ -77,8 +77,7 @@ patternProperties: maximum: 900000000

nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "18.13.1 MC Registers" in the TRM. diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml index 39afacc447b2..f591332fc462 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -31,19 +31,19 @@ properties: description: A touchscreen is attached to the controller

allwinner,tp-sensitive-adjust: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 15 + description: Sensitivity of pen down detection

allwinner,filter-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + description: | Select median and averaging filter. Sample used for median / averaging filter: diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index 4acda7ce3b44..f212fc6e1661 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -67,23 +67,22 @@ properties: description: One or two <index level filter> to describe break input configurations. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "index" indicates on which break input (0 or 1) the - configuration should be applied. - enum: [ 0 , 1] - - description: | - "level" gives the active level (0=low or 1=high) of the - input signal for this configuration - enum: [ 0, 1 ] - - description: | - "filter" gives the filtering value (up to 15) to be applied. - maximum: 15 - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "index" indicates on which break input (0 or 1) the + configuration should be applied. + enum: [0, 1] + - description: | + "level" gives the active level (0=low or 1=high) of the + input signal for this configuration + enum: [0, 1] + - description: | + "filter" gives the filtering value (up to 15) to be applied. + maximum: 15 + minItems: 1 + maxItems: 2

required: - "#pwm-cells" diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index d9ad9260e348..a10dceae9bc5 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -29,8 +29,7 @@ properties: onkey: type: object

- allOf: - - $ref: ../input/input.yaml + $ref: ../input/input.yaml

properties: compatible: @@ -68,8 +67,7 @@ properties: watchdog: type: object

- allOf: - - $ref: ../watchdog/watchdog.yaml + $ref: ../watchdog/watchdog.yaml

properties: compatible: @@ -190,8 +188,7 @@ properties: description: STPMIC1 voltage regulators supplies

"^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - allOf: - - $ref: ../regulator/regulator.yaml + $ref: ../regulator/regulator.yaml

"^ldo[1-2,5-6]$": type: object diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 7a39486b215a..19bdaf781853 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -52,9 +52,8 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8]

hwlocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml index 200de9396036..987b287f3bff 100644 --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml @@ -41,8 +41,8 @@ properties: patternProperties: "^sdhci@[0-9a-f]+$": type: object - allOf: - - $ref: mmc-controller.yaml + $ref: mmc-controller.yaml + properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index d43a0c557a44..d93f7794a85f 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -36,91 +36,80 @@ properties:

cdns,phy-input-delay-sd-highspeed: description: Value of the delay in the input path for SD high-speed timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f

cdns,phy-input-delay-legacy: description: Value of the delay in the input path for legacy timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f

cdns,phy-input-delay-sd-uhs-sdr12: description: Value of the delay in the input path for SD UHS SDR12 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f

cdns,phy-input-delay-sd-uhs-sdr25: description: Value of the delay in the input path for SD UHS SDR25 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f

cdns,phy-input-delay-sd-uhs-sdr50: description: Value of the delay in the input path for SD UHS SDR50 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f

cdns,phy-input-delay-sd-uhs-ddr50: description: Value of the delay in the input path for SD UHS DDR50 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f

cdns,phy-input-delay-mmc-highspeed: description: Value of the delay in the input path for MMC high-speed timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f

cdns,phy-input-delay-mmc-ddr: description: Value of the delay in the input path for eMMC high-speed DDR timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f

# PHY DLL clock delays: # Each delay property represents the fraction of the clock period. # The approximate delay value will be # (<delay property value>/128)*sdmclk_clock_period. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f

cdns,phy-dll-delay-sdclk: description: | Value of the delay introduced on the sdclk output for all modes except HS200, HS400 and HS400_ES. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f

cdns,phy-dll-delay-sdclk-hsmmc: description: | Value of the delay introduced on the sdclk output for HS200, HS400 and HS400_ES speed modes. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f

cdns,phy-dll-delay-strobe: description: | Value of the delay introduced on the dat_strobe input used in HS400 / HS400_ES speed modes. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f

required: - compatible diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index acc9f10871d4..4931fab34d81 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -76,20 +76,18 @@ properties: # Other properties

bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4, 8] - default: 1 description: Number of data lines. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4, 8] + default: 1

max-frequency: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 400000 - - maximum: 200000000 description: Maximum operating frequency of the bus. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 400000 + maximum: 200000000

disable-wp: $ref: /schemas/types.yaml#/definitions/flag @@ -212,13 +210,12 @@ properties: eMMC HS400 enhanced strobe mode is supported

dsr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 0xffff description: Value the card Driver Stage Register (DSR) should be programmed with. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0xffff

no-sdio: $ref: /schemas/types.yaml#/definitions/flag @@ -238,25 +235,23 @@ properties: initialization.

fixed-emmc-driver-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 4 description: For non-removable eMMC, enforce this driver type. The value is the driver type as specified in the eMMC specification (table 206 in spec version 5.1) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4

post-power-on-delay-ms: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 10 description: It was invented for MMC pwrseq-simple which could be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 10

supports-cqe: $ref: /schemas/types.yaml#/definitions/flag @@ -333,8 +328,8 @@ patternProperties: - reg

"^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 maxItems: 2 items: diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 4ee3ed6efab4..42d44cbf962f 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -76,8 +76,7 @@ properties: high speed modes.

rockchip,default-sample-phase: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 0 @@ -87,8 +86,7 @@ properties: If not specified 0 deg will be used.

rockchip,desired-num-phases: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 360 diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml index 890d47a87ac5..85bd528e9a14 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -27,39 +27,35 @@ properties: clock to this at probe time.

fifo-depth: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The maximum size of the tx/rx fifo's. If this property is not specified, the default value of the fifo size is determined from the controller registers. + $ref: /schemas/types.yaml#/definitions/uint32

card-detect-delay: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 description: Delay in milli-seconds before detecting card after card insert event. The default value is 0. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0

data-addr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Override fifo address with value provided by DT. The default FIFO reg offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by driver. If the controller does not follow this rule, please use this property to set fifo address in device tree. + $ref: /schemas/types.yaml#/definitions/uint32

fifo-watermark-aligned: - allOf: - - $ref: /schemas/types.yaml#/definitions/flag description: Data done irq is expected if data length is less than watermark in PIO mode. But fifo watermark is requested to be aligned with data length in some SoC so that TX/RX irq can be generated with data done irq. Add this watermark quirk to mark this requirement and force fifo watermark setting accordingly. + $ref: /schemas/types.yaml#/definitions/flag

dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 5d3fa412aabd..c033ac3f147d 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -75,13 +75,12 @@ patternProperties: allwinner,rb: description: Contains the native Ready/Busy IDs. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1

additionalProperties: false

diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index d261b7096c69..cde7c4d79efe 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -47,29 +47,26 @@ patternProperties: Contains the native Ready/Busy IDs.

nand-ecc-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ] description: Desired ECC engine, either hardware (most of the time embedded in the NAND controller) or software correction (Linux will handle the calculations). soft_bch is deprecated and should be replaced by soft and nand-ecc-algo. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]

nand-ecc-algo: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ hamming, bch, rs ] description: Desired ECC algorithm. + $ref: /schemas/types.yaml#/definitions/string + enum: [hamming, bch, rs]

nand-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 8, 16 ] - - default: 8 description: Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8

nand-on-flash-bbt: $ref: /schemas/types.yaml#/definitions/flag @@ -83,18 +80,16 @@ patternProperties: build a volatile BBT in RAM.

nand-ecc-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Maximum number of bits that can be corrected per ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1

nand-ecc-step-size: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Number of data bytes covered by a single ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1

nand-ecc-maximize: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 7a784dc4e513..798fa5fb7bb2 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -76,36 +76,35 @@ properties:

Please refer to 2.4.1 Message RAM Configuration in Bosch M_CAN user manual for details. - allOf: - - $ref: /schemas/types.yaml#/definitions/int32-array - - items: - items: - - description: The 'offset' is an address offset of the Message RAM - where the following elements start from. This is usually - set to 0x0 if you're using a private Message RAM. - default: 0 - - description: 11-bit Filter 0-128 elements / 0-128 words - minimum: 0 - maximum: 128 - - description: 29-bit Filter 0-64 elements / 0-128 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 0 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 1 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx Buffers 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Tx Event FIFO 0-32 elements / 0-64 words - minimum: 0 - maximum: 32 - - description: Tx Buffers 0-32 elements / 0-576 words - minimum: 0 - maximum: 32 - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/int32-array + items: + items: + - description: The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + maxItems: 1

can-transceiver: $ref: can-transceiver.yaml# diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index ac471b60ed6a..1c4474036d46 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -14,25 +14,23 @@ properties: pattern: "^ethernet(@.*)?$"

local-mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was assigned to the network device. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6

mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was last used by the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6

max-frame-size: $ref: /schemas/types.yaml#definitions/uint32 @@ -133,15 +131,14 @@ properties: is used for components that can have configurable fifo sizes.

managed: - allOf: - - $ref: /schemas/types.yaml#definitions/string - - default: auto - enum: - - auto - - in-band-status description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. + $ref: /schemas/types.yaml#definitions/string + default: auto + enum: + - auto + - in-band-status

fixed-link: allOf: @@ -183,11 +180,10 @@ properties: then: properties: speed: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [10, 100, 1000] description: Link speed. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [10, 100, 1000]

full-duplex: $ref: /schemas/types.yaml#definitions/flag diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 5a6c9d20c0ba..1788884b8c28 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -20,15 +20,13 @@ allOf: properties: qca,clk-out-frequency: description: Clock output frequency in Hertz. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 25000000, 50000000, 62500000, 125000000 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [25000000, 50000000, 62500000, 125000000]

qca,clk-out-strength: description: Clock output driver strength. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2]

qca,keep-pll-enabled: description: | @@ -52,17 +50,14 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml

vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. - allOf: - - $ref: /schemas/regulator/regulator.yaml - + $ref: /schemas/regulator/regulator.yaml

examples: - | diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index e08cd4c4d568..3c825c74d596 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -199,14 +199,13 @@ properties:

snps,reset-delays-us: deprecated: true - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 3 - maxItems: 3 description: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 3 + maxItems: 3

snps,aal: $ref: /schemas/types.yaml#definitions/flag @@ -301,27 +300,24 @@ allOf: then: properties: snps,pbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8]

snps,txpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8]

snps,rxpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8]

snps,no-pbl-x8: $ref: /schemas/types.yaml#definitions/flag diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 8fc8d3be303b..1dd5a9bd9db7 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -150,10 +150,9 @@ properties: patternProperties: "^mdio@": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" description: CPSW MDIO bus. + $ref: "ti,davinci-mdio.yaml#"

required: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 2ea14ab29254..d454c1fab930 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -40,10 +40,9 @@ properties: ti,hwmods: description: TI hwmod name deprecated: true - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - const: davinci_mdio + $ref: /schemas/types.yaml#/definitions/string-array + items: + const: davinci_mdio

if: properties: diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml index 48a98dae00de..64b2c64ca806 100644 --- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -71,10 +71,9 @@ properties:

max-link-speed: description: Specify PCI Gen for link capability. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 3, 4 ] - - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1

bus-range: description: Range of bus numbers associated with this controller. diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index bfefd09d8c1e..7556be6e2754 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -84,13 +84,12 @@ properties: gpio-line-names: true

input-debounce: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 5 description: Debouncing periods in microseconds, one period per interrupt bank found in the controller + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 5

patternProperties: # It's pretty scary, but the basic idea is that: @@ -115,9 +114,8 @@ patternProperties: bias-pull-down: true

drive-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 10, 20, 30, 40 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [10, 20, 30, 40]

required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 7651a675ab2d..017d9593573b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -33,26 +33,23 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, - GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, - I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, - LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, - NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3, - PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16, - ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4, - SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, - SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, - TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, - USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30, - VPO12, VPO24, WDTRST1, WDTRST2 ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]

required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 36feaf5e2dff..0172b78e2f27 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -29,8 +29,8 @@ properties: aspeed,external-nodes: minItems: 2 maxItems: 2 - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | A cell of phandles to external controller nodes: 0: compatible with "aspeed,ast2500-gfx", "syscon" @@ -43,28 +43,25 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, - GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, - I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, - LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST, - LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1, - RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, - SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, - SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, - SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, - TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD, - USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1, - WDTRST2, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2]

required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 45af29bc3202..1506726c7fea 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -30,64 +30,58 @@ patternProperties: then: properties: function: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, - ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, - GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, - I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, - I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, - MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, - PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, - RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, - SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, - SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, - UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, - WDTRST4, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, + SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4] + groups: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, - EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, - FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, - GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, - GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, - I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, - I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, - LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4, - MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, - NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, - PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, - PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, - PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, - RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, - SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1, - SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1, - SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, - SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0, - UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA, - USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, + SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4]

required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml index 6297e78418cf..d474bc1f393b 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Plus Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied.

required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml index cd2b436350ef..2c0acb405e6c 100644 --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml @@ -24,12 +24,10 @@ properties: patternProperties: '-pins$': type: object - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: pinmux-node.yaml#

properties: function: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index 732d9075560b..ef8877ddb1eb 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -122,11 +122,10 @@ properties: this, "pins" or "pinmux" has to be specified)

pinmux: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: The list of numeric pin ids and their mux settings that properties in the node apply to (either this, "pins" or "groups" have to be specified) + $ref: /schemas/types.yaml#/definitions/uint32-array

pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-array diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 46a0478cb924..e9d6e54fc0a0 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -37,21 +37,18 @@ properties: hwlocks: true

st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Should be phandle/offset/mask - Phandle to the syscon node which includes IRQ mux selection. - The offset of the IRQ mux selection register. - The field mask of IRQ mux, needed if different of 0xf. + $ref: "/schemas/types.yaml#/definitions/phandle-array"

st,package: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4, 8] description: Indicates the SOC package used. More details in include/dt-bindings/pinctrl/stm32-pinfunc.h - + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8]

patternProperties: '^gpio@[0-9a-f]*$': @@ -78,33 +75,31 @@ patternProperties: maximum: 16

st,bank-name: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - GPIOA - - GPIOB - - GPIOC - - GPIOD - - GPIOE - - GPIOF - - GPIOG - - GPIOH - - GPIOI - - GPIOJ - - GPIOK - - GPIOZ description: Should be a name string for this bank as specified in the datasheet. + $ref: "/schemas/types.yaml#/definitions/string" + enum:

- st,bank-ioport: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 11 + - GPIOA + - GPIOB + - GPIOC + - GPIOD + - GPIOE + - GPIOF + - GPIOG + - GPIOH + - GPIOI + - GPIOJ + - GPIOK + - GPIOZ

+ st,bank-ioport: description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 11

required: - gpio-controller @@ -125,8 +120,8 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: "/schemas/types.yaml#/definitions/uint32-array" + description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are @@ -180,9 +175,8 @@ patternProperties: 1: Medium speed 2: Fast speed 3: High speed - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3]

required: - pinmux diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index 6c6079fe1351..49fd3feabba5 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -56,8 +56,7 @@ properties:

amlogic,ao-sysctrl: description: phandle to the AO sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle

required: - compatible diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml index 4fe64f4dd594..fc799b0577d4 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -78,12 +78,11 @@ properties: A list of PWM channels used as PWM outputs on particular platform. It is an array of up to 5 elements being indices of PWM channels (from 0 to 4), the order does not matter. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - uniqueItems: true - - items: - minimum: 0 - maximum: 4 + $ref: /schemas/types.yaml#/definitions/uint32-array + uniqueItems: true + items: + minimum: 0 + maximum: 4

required: - clocks diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index 9d3b28417fb6..605590384b48 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -46,24 +46,22 @@ properties: 0: LOW 1: HIGH Default is LOW if nothing else is specified. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - maxItems: 8 - items: - enum: [ 0, 1 ] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 8 + items: + enum: [0, 1] + default: 0

states: description: Selection of available voltages/currents provided by this regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - maxItems: 8 - items: - items: - - description: Voltage in microvolts - - description: GPIO group state value + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value

startup-delay-us: description: startup time in microseconds @@ -81,12 +79,11 @@ properties:

regulator-type: description: Specifies what is being regulated. - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: - - voltage - - current - default: voltage + $ref: /schemas/types.yaml#/definitions/string + enum: + - voltage + - current + default: voltage

required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index a682af0dc67e..e5422eaf851d 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -21,17 +21,17 @@ properties:

regulators: type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# + description: | list of regulators provided by this controller, must be named after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]

properties: mps,switch-freq: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] default: 2 description: | switching frequency must be one of following corresponding value @@ -40,32 +40,29 @@ properties: patternProperties: "^ldo[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml#

"^ldortc$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml#

"^buck[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml#

properties: mps,buck-softstart: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] description: | defines the soft start time of this buck, must be one of the following corresponding values 150us, 300us, 610us, 920us

mps,buck-phase-delay: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + + enum: [0, 1, 2, 3] description: | defines the phase delay of this buck, must be one of the following corresponding values 0deg, 90deg, 180deg, 270deg diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 91a39a33000b..ec505dbbf87c 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -123,9 +123,8 @@ properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1]

regulator-coupled-with: description: Regulators with which the regulator is coupled. The linkage diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 71ce032b8cf8..ac74e214b050 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -24,10 +24,9 @@ description: | patternProperties: "^LDO[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single LDO regulator. + $ref: regulator.yaml#

properties: regulator-name: @@ -37,10 +36,9 @@ patternProperties:

"^BUCK[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single BUCK regulator. + $ref: regulator.yaml#

properties: regulator-name: @@ -49,40 +47,36 @@ patternProperties: should be "buck1", ..., "buck7"

rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000

rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000

rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000

rohm,dvs-lpsr-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "LPSR" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000

# Supported default DVS states: # buck | run | idle | suspend | lpsr diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml index 64f1183ce841..cb336b2c16af 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -23,8 +23,7 @@ properties: - st,stm32mp1-booster

st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: phandle to system configuration controller.

vdda-supply: diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml index 8d8f38fe85dc..e6322bc3e447 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -26,8 +26,7 @@ patternProperties: "^(reg11|reg18|usb33)$": type: object

- allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#"

required: - compatible diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 4ff4d3df0a06..4ffa25268fcc 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -28,22 +28,20 @@ properties: maxItems: 1

st,syscfg-holdboot: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: remote processor reset hold boot - Phandle of syscon block. - The offset of the hold boot setting register. - The field mask of the hold boot. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1

st,syscfg-tz: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Reference to the system configuration which holds the RCC trust zone mode - Phandle of syscon block. - The offset of the RCC trust zone mode register. - The field mask of the RCC trust zone mode. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1

interrupts: @@ -90,8 +88,7 @@ properties: (see ../reserved-memory/reserved-memory.txt)

st,syscfg-pdds: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the system configuration which holds the remote 1st cell: phandle to syscon block diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml index 8ac437282659..6b2d56cc3f38 100644 --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -21,8 +21,7 @@ properties:

intel,global-reset: description: Global reset register offset and bit offset. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: Register offset - description: Register bit offset diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 04819ad379c2..f80ba2c66f71 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -40,24 +40,18 @@ properties: and identifies the type of the hart.

mmu-type: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - riscv,sv32 - - riscv,sv39 - - riscv,sv48 description: Identifies the MMU address translation mode used on this hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - riscv,sv32 + - riscv,sv39 + - riscv,sv48

riscv,isa: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - rv64imac - - rv64imafdc description: Identifies the specific RISC-V instruction set architecture supported by the hart. These are documented in the RISC-V @@ -67,6 +61,10 @@ properties: While the isa strings in ISA specification are case insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - rv64imac + - rv64imafdc

# RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 57b087574aa1..5456604b1c14 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -32,11 +32,10 @@ properties: maxItems: 1

st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 description: | Phandle/offset/mask triplet. The phandle to pwrcfg used to access control register at offset, and change the dbp (Disable Backup diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index 1a64d59152aa..c23c93b400f0 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -88,17 +88,15 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 100 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 100

poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 3000 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3000

required: - compatible diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index 2b8261ea6d9c..8141e4aad530 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -16,20 +16,18 @@ maintainers: properties: rs485-rts-delay: description: prop-encoded-array <a b> - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - items: - - description: - Delay between rts signal and beginning of data sent in milliseconds. - It corresponds to the delay before sending data. - default: 0 - maximum: 1000 - - description: - Delay between end of data sent and rts signal in milliseconds. - It corresponds to the delay after sending data and actual release of the line. - default: 0 - maximum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + items: + - description: Delay between rts signal and beginning of data sent in + milliseconds. It corresponds to the delay before sending data. + default: 0 + maximum: 1000 + - description: Delay between end of data sent and rts signal in milliseconds. + It corresponds to the delay after sending data and actual release + of the line. + default: 0 + maximum: 1000

rs485-rts-active-low: description: drive RTS low when sending (default is high). diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 9d2ce347875b..ff2f49fe322c 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -51,9 +51,8 @@ properties:

samsung,uart-fifosize: description: The fifo size supported by the UART channel. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [16, 64, 256] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [16, 64, 256]

required: - compatible diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index 76ee695097bf..fb78967ee17b 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -35,23 +35,21 @@ properties: adi,decimation-ratio: description: | This property set's the decimation ratio of PDM to PCM audio data. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [64, 32, 16] - default: 64 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [64, 32, 16] + default: 64

adi,pdm-clk-map: description: | The ADAU7118 has two PDM clocks for the four Inputs. Each input must be assigned to one of these two clocks. This property set's the mapping between the clocks and the inputs. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 4 - maxItems: 4 - items: - maximum: 1 - default: [0, 0, 1, 1] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + items: + maximum: 1 + default: [0, 0, 1, 1]

required: - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index ea1d2efb2aaa..98938db56285 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -57,32 +57,31 @@ properties: A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. - allOf: - - $ref: /schemas/types.yaml#definitions/non-unique-string-array - - minItems: 2 - maxItems: 18 - items: - enum: + $ref: /schemas/types.yaml#definitions/non-unique-string-array + minItems: 2 + maxItems: 18 + items: + enum: # Audio Pins on the SoC - - HP - - HPCOM - - LINEIN - - LINEOUT - - MIC1 - - MIC2 - - MIC3 + - HP + - HPCOM + - LINEIN + - LINEOUT + - MIC1 + - MIC2 + - MIC3

# Microphone Biases from the SoC - - HBIAS - - MBIAS + - HBIAS + - MBIAS

# Board Connectors - - Headphone - - Headset Mic - - Line In - - Line Out - - Mic - - Speaker + - Headphone + - Headset Mic + - Line In + - Line Out + - Mic + - Speaker

allwinner,codec-analog-controls: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index a495d5fc0d23..e8f716b5f875 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -102,8 +102,7 @@ properties:

gpio@42: type: object - allOf: - - $ref: ../gpio/qcom,wcd934x-gpio.yaml# + $ref: ../gpio/qcom,wcd934x-gpio.yaml#

patternProperties: "^.*@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index b6c1dd2a9c5e..c8f0985a8738 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -96,43 +96,39 @@ properties:

renesas,dtdl: description: delay sync signal (setup) in transmit mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: - - 0 # no bit delay - - 50 # 0.5-clock-cycle delay - - 100 # 1-clock-cycle delay - - 150 # 1.5-clock-cycle delay - - 200 # 2-clock-cycle delay + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # no bit delay + - 50 # 0.5-clock-cycle delay + - 100 # 1-clock-cycle delay + - 150 # 1.5-clock-cycle delay + - 200 # 2-clock-cycle delay

renesas,syncdl: description: delay sync signal (hold) in transmit mode - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: - - 0 # no bit delay - - 50 # 0.5-clock-cycle delay - - 100 # 1-clock-cycle delay - - 150 # 1.5-clock-cycle delay - - 200 # 2-clock-cycle delay - - 300 # 3-clock-cycle delay + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # no bit delay + - 50 # 0.5-clock-cycle delay + - 100 # 1-clock-cycle delay + - 150 # 1.5-clock-cycle delay + - 200 # 2-clock-cycle delay + - 300 # 3-clock-cycle delay

renesas,tx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default TX fifo size. Unit is words. Ignored if 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 default: 64

renesas,rx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default RX fifo size. Unit is words. Ignored if 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 default: 64

required: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index d8e5509a7081..c6a2f543648b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -115,24 +115,22 @@ patternProperties: Maximum SPI clocking speed of the device in Hz.

spi-rx-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] - - default: 1 description: Bus width to the SPI bus used for read transfers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 1

spi-rx-delay-us: description: Delay, in microseconds, after a read transfer.

spi-tx-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] - - default: 1 description: Bus width to the SPI bus used for write transfers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 1

spi-tx-delay-us: description: diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 22ba4e90655b..22999024477f 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -80,55 +80,48 @@ patternProperties: properties: pl022,interface: description: SPI interface type - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: - - 0 # SPI - - 1 # Texas Instruments Synchronous Serial Frame Format - - 2 # Microwire (Half Duplex) + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: + - 0 # SPI + - 1 # Texas Instruments Synchronous Serial Frame Format + - 2 # Microwire (Half Duplex)

pl022,com-mode: description: Specifies the transfer mode - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: - - 0 # interrupt mode - - 1 # polling mode - - 2 # DMA mode - default: 1 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: + - 0 # interrupt mode + - 1 # polling mode + - 2 # DMA mode + default: 1

pl022,rx-level-trig: description: Rx FIFO watermark level - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 4 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 4

pl022,tx-level-trig: description: Tx FIFO watermark level - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 4 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 4

pl022,ctrl-len: description: Microwire interface - Control length - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0x03 - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0x03 + maximum: 0x1f

pl022,wait-state: description: Microwire interface - Wait state - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1]

pl022,duplex: description: Microwire interface - Full/Half duplex - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1]

required: - compatible diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml index 140e4351a19f..28040598bfae 100644 --- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml +++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml @@ -50,18 +50,16 @@ properties: sifive,fifo-depth: description: Depth of hardware queues; defaults to 8 - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 8 ] - - default: 8 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [8] + default: 8

sifive,max-bits-per-word: description: Maximum bits per word; defaults to 8 - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8 ] - - default: 8 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] + default: 8

required: - compatible diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 2ddd39d96766..d7be931b42d2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -73,12 +73,11 @@ properties: - const: calib_sel

"#qcom,sensors": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - - maximum: 16 description: Number of sensors enabled on this platform + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 16

"#thermal-sensor-cells": const: 1 diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 6ff718ede184..d83a1f97f911 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -65,10 +65,9 @@ patternProperties: description: A timer node has up to 8 frame sub-nodes, each with the following properties. properties: frame-number: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 7 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 7

interrupts: minItems: 1 -- 2.20.1

On 15/04/2020 19:55:48-0500, Rob Herring wrote:

Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files.

Signed-off-by: Rob Herring robh@kernel.org

Acked-by: Alexandre Belloni alexandre.belloni@bootlin.com

---

.../devicetree/bindings/arm/altera.yaml | 6 +- .../amlogic/amlogic,meson-gx-ao-secure.yaml | 2 +- .../devicetree/bindings/arm/bitmain.yaml | 2 +- .../devicetree/bindings/arm/nxp/lpc32xx.yaml | 9 ++- .../bindings/arm/socionext/uniphier.yaml | 26 ++++---- .../bindings/arm/stm32/st,mlahb.yaml | 2 +- .../bindings/arm/stm32/st,stm32-syscon.yaml | 6 +- .../bindings/ata/faraday,ftide010.yaml | 4 +- .../bindings/bus/allwinner,sun8i-a23-rsb.yaml | 4 +- .../clock/allwinner,sun4i-a10-gates-clk.yaml | 8 +-- .../devicetree/bindings/clock/fsl,plldig.yaml | 17 +++-- .../devicetree/bindings/clock/qcom,mmcc.yaml | 16 ++--- .../bindings/connector/usb-connector.yaml | 6 +- .../crypto/allwinner,sun4i-a10-crypto.yaml | 14 ++-- .../bindings/crypto/allwinner,sun8i-ce.yaml | 16 ++--- .../bindings/crypto/amlogic,gxl-crypto.yaml | 2 +- .../display/allwinner,sun4i-a10-hdmi.yaml | 40 ++++++------ .../display/allwinner,sun4i-a10-tcon.yaml | 58 ++++++++--------- .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 ++++---- .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 10 +-- .../bindings/display/bridge/lvds-codec.yaml | 18 +++--- .../display/panel/sony,acx424akp.yaml | 2 +- .../display/panel/xinpeng,xpp055c272.yaml | 4 +- .../bindings/display/renesas,cmm.yaml | 16 ++--- .../devicetree/bindings/dma/ti/k3-udma.yaml | 8 +-- .../bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 +- .../bindings/gpu/arm,mali-midgard.yaml | 18 +++--- .../devicetree/bindings/gpu/vivante,gc.yaml | 2 +- .../devicetree/bindings/i2c/i2c-rk3x.yaml | 10 +-- .../bindings/iio/adc/adi,ad7124.yaml | 4 +- .../bindings/iio/adc/lltc,ltc2496.yaml | 6 +- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 4 +- .../bindings/input/touchscreen/goodix.yaml | 2 +- .../bindings/interconnect/qcom,msm8916.yaml | 4 +- .../bindings/interconnect/qcom,msm8974.yaml | 4 +- .../bindings/interconnect/qcom,qcs404.yaml | 4 +- .../allwinner,sun7i-a20-sc-nmi.yaml | 12 ++-- .../intel,ixp4xx-interrupt.yaml | 8 +-- .../interrupt-controller/st,stm32-exti.yaml | 12 ++-- .../bindings/iommu/samsung,sysmmu.yaml | 10 +-- .../bindings/mailbox/st,stm32-ipcc.yaml | 2 +- .../media/allwinner,sun4i-a10-csi.yaml | 28 ++++---- .../bindings/media/amlogic,gx-vdec.yaml | 14 ++-- .../bindings/media/renesas,ceu.yaml | 28 ++++---- .../bindings/media/renesas,vin.yaml | 8 +-- .../devicetree/bindings/media/ti,vpe.yaml | 2 +- .../memory-controllers/fsl/imx8m-ddrc.yaml | 6 +- .../bindings/mfd/st,stm32-lptimer.yaml | 4 +- .../bindings/mfd/st,stm32-timers.yaml | 4 +- .../devicetree/bindings/mfd/syscon.yaml | 12 ++-- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 2 +- .../bindings/mmc/rockchip-dw-mshc.yaml | 16 ++--- .../bindings/mmc/socionext,uniphier-sd.yaml | 14 ++-- .../devicetree/bindings/mtd/denali,nand.yaml | 4 +- .../net/allwinner,sun8i-a83t-emac.yaml | 4 +- .../bindings/net/can/bosch,m_can.yaml | 52 +++++++-------- .../bindings/net/renesas,ether.yaml | 4 +- .../bindings/net/ti,cpsw-switch.yaml | 12 ++-- .../bindings/net/ti,davinci-mdio.yaml | 27 ++++---- .../bindings/phy/intel,lgm-emmc-phy.yaml | 2 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 16 ++--- .../bindings/remoteproc/st,stm32-rproc.yaml | 2 +- .../reset/brcm,bcm7216-pcie-sata-rescal.yaml | 4 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 38 +++++------ .../bindings/serial/amlogic,meson-uart.yaml | 16 ++--- .../devicetree/bindings/serial/rs485.yaml | 17 ++--- .../bindings/soc/amlogic/amlogic,canvas.yaml | 10 +-- .../bindings/sound/renesas,fsi.yaml | 16 ++--- .../bindings/spi/qcom,spi-qcom-qspi.yaml | 10 +-- .../devicetree/bindings/spi/renesas,hspi.yaml | 4 +- .../devicetree/bindings/spi/spi-pl022.yaml | 2 +- .../bindings/spi/st,stm32-qspi.yaml | 4 +- .../allwinner,sun4i-a10-system-control.yaml | 64 +++++++++---------- .../bindings/thermal/amlogic,thermal.yaml | 10 +-- .../bindings/timer/arm,arch_timer.yaml | 4 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 4 +- .../devicetree/bindings/usb/dwc2.yaml | 8 +-- 77 files changed, 450 insertions(+), 450 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index 49e0362ddc11..b388c5aa7984 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -13,8 +13,8 @@ properties: compatible: items: - enum:

•    - altr,socfpga-cyclone5
  

•    - altr,socfpga-arria5
  

•    - altr,socfpga-arria10
  

•      - altr,socfpga-cyclone5
  

•      - altr,socfpga-arria5
  

•      - altr,socfpga-arria10
   - const: altr,socfpga
  

... diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml index 66213bd95e6e..6cc74523ebfd 100644 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -25,7 +25,7 @@ select:

properties: compatible:

• items:

• items:
  • const: amlogic,meson-gx-ao-secure
  • const: syscon

diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml index 0efdb4ac028e..5cd5b36cff2d 100644 --- a/Documentation/devicetree/bindings/arm/bitmain.yaml +++ b/Documentation/devicetree/bindings/arm/bitmain.yaml @@ -13,6 +13,6 @@ properties: compatible: items: - enum:

•    - bitmain,sophon-edge
  

•      - bitmain,sophon-edge
   - const: bitmain,bm1880
  

... diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml index 07f39d3eee7e..f7f024910e71 100644 --- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml +++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml @@ -17,9 +17,8 @@ properties: - nxp,lpc3230 - nxp,lpc3240 - items:

•    - enum:
  

•        - ea,ea3250
  

•        - phytec,phy3250
  

•    - const: nxp,lpc3250
  

•      - enum:
  

•          - ea,ea3250
  

•          - phytec,phy3250
  

•      - const: nxp,lpc3250
  

... diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml index 65ad6d8a3c99..113f93b9ae55 100644 --- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml @@ -17,45 +17,45 @@ properties: - description: LD4 SoC boards items: - enum:

•        - socionext,uniphier-ld4-ref
  

•          - socionext,uniphier-ld4-ref
       - const: socionext,uniphier-ld4
   - description: Pro4 SoC boards
     items:
       - enum:
  

•        - socionext,uniphier-pro4-ace
  

•        - socionext,uniphier-pro4-ref
  

•        - socionext,uniphier-pro4-sanji
  

•          - socionext,uniphier-pro4-ace
  

•          - socionext,uniphier-pro4-ref
  

•          - socionext,uniphier-pro4-sanji
       - const: socionext,uniphier-pro4
   - description: sLD8 SoC boards
     items:
       - enum:
  

•        - socionext,uniphier-sld8-ref
  

•          - socionext,uniphier-sld8-ref
       - const: socionext,uniphier-sld8
   - description: PXs2 SoC boards
     items:
       - enum:
  

•        - socionext,uniphier-pxs2-gentil
  

•        - socionext,uniphier-pxs2-vodka
  

•          - socionext,uniphier-pxs2-gentil
  

•          - socionext,uniphier-pxs2-vodka
       - const: socionext,uniphier-pxs2
   - description: LD6b SoC boards
     items:
       - enum:
  

•        - socionext,uniphier-ld6b-ref
  

•          - socionext,uniphier-ld6b-ref
       - const: socionext,uniphier-ld6b
   - description: LD11 SoC boards
     items:
       - enum:
  

•        - socionext,uniphier-ld11-global
  

•        - socionext,uniphier-ld11-ref
  

•          - socionext,uniphier-ld11-global
  

•          - socionext,uniphier-ld11-ref
       - const: socionext,uniphier-ld11
   - description: LD20 SoC boards
     items:
       - enum:
  

•        - socionext,uniphier-ld20-global
  

•        - socionext,uniphier-ld20-ref
  

•          - socionext,uniphier-ld20-global
  

•          - socionext,uniphier-ld20-ref
       - const: socionext,uniphier-ld20
   - description: PXs3 SoC boards
     items:
       - enum:
  

•        - socionext,uniphier-pxs3-ref
  

•          - socionext,uniphier-pxs3-ref
       - const: socionext,uniphier-pxs3
  

diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 55f7938c4826..9f276bc9efa0 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -20,7 +20,7 @@ description: | [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping

allOf:

• • $ref: /schemas/simple-bus.yaml#

• • $ref: /schemas/simple-bus.yaml#

properties: compatible: diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index baff80197d5a..cf5db5e273f3 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -14,9 +14,9 @@ properties: compatible: oneOf: - items:

•    - enum:
  

•      - st,stm32mp157-syscfg
  

•    - const: syscon
  

•      - enum:
  

•          - st,stm32mp157-syscfg
  

•      - const: syscon
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml index bfc6357476fd..6451928dd2ce 100644 --- a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml @@ -26,8 +26,8 @@ properties: oneOf: - const: faraday,ftide010 - items:

•    - const: cortina,gemini-pata
  

•    - const: faraday,ftide010
  

•      - const: cortina,gemini-pata
  

•      - const: faraday,ftide010
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index 80973619342d..32d33b983d66 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -21,8 +21,8 @@ properties: oneOf: - const: allwinner,sun8i-a23-rsb - items:

•    - const: allwinner,sun8i-a83t-rsb
  

•    - const: allwinner,sun8i-a23-rsb
  

•      - const: allwinner,sun8i-a83t-rsb
  

•      - const: allwinner,sun8i-a23-rsb
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml index ed1b2126a81b..9a37a357cb4e 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml @@ -52,12 +52,12 @@ properties: - const: allwinner,sun4i-a10-dram-gates-clk

   - items:

•    - const: allwinner,sun5i-a13-dram-gates-clk
  

•    - const: allwinner,sun4i-a10-gates-clk
  

•      - const: allwinner,sun5i-a13-dram-gates-clk
  

•      - const: allwinner,sun4i-a10-gates-clk
  
   - items:
  

•    - const: allwinner,sun8i-h3-apb0-gates-clk
  

•    - const: allwinner,sun4i-a10-gates-clk
  

•      - const: allwinner,sun8i-h3-apb0-gates-clk
  

•      - const: allwinner,sun4i-a10-gates-clk
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml index a203d5d498db..8141f22410dd 100644 --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml @@ -28,15 +28,14 @@ properties: const: 0

fsl,vco-hz:

• description: Optional for VCO frequency of the PLL in Hertz.
  

•    The VCO frequency of this PLL cannot be changed during runtime
  

•    only at startup. Therefore, the output frequencies are very
  

•    limited and might not even closely match the requested frequency.
  

•    To work around this restriction the user may specify its own
  

•    desired VCO frequency for the PLL.
  

• minimum: 650000000
  

• maximum: 1300000000
  

• default: 1188000000
  

• description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency

•  of this PLL cannot be changed during runtime only at startup. Therefore,
  

•  the output frequencies are very limited and might not even closely match
  

•  the requested frequency. To work around this restriction the user may specify
  

•  its own desired VCO frequency for the PLL.
  

• minimum: 650000000
• maximum: 1300000000
• default: 1188000000

required:

• compatible

diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index f684fe67db84..acc31b3991bd 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -15,15 +15,15 @@ description: | power domains.

properties:

• compatible :

• compatible: enum:

•   - qcom,mmcc-apq8064
  

•   - qcom,mmcc-apq8084
  

•   - qcom,mmcc-msm8660
  

•   - qcom,mmcc-msm8960
  

•   - qcom,mmcc-msm8974
  

•   - qcom,mmcc-msm8996
  

•   - qcom,mmcc-msm8998
  

•  - qcom,mmcc-apq8064
  

•  - qcom,mmcc-apq8084
  

•  - qcom,mmcc-msm8660
  

•  - qcom,mmcc-msm8960
  

•  - qcom,mmcc-msm8974
  

•  - qcom,mmcc-msm8996
  

•  - qcom,mmcc-msm8998
  
  

  clocks: items:

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 4638d7adb806..369c58e22a06 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -144,7 +144,7 @@ required:

examples: # Micro-USB connector with HS lines routed via controller (MUIC).

• • |+

• • | muic-max77843 { usb_con1: connector { compatible = "usb-b-connector";

@@ -156,7 +156,7 @@ examples: # USB-C connector attached to CC controller (s2mm005), HS lines routed # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.

• • |+

• • | ccic: s2mm005 { usb_con2: connector { compatible = "usb-c-connector";

@@ -190,7 +190,7 @@ examples:

# USB-C connector attached to a typec port controller(ptn5110), which has # power delivery support and enables drp.

• • |+

• • | #include <dt-bindings/usb/pd.h> typec: ptn5110 { usb_con3: connector {

diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml index 8b9a8f337f16..fc823572bcff 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -15,16 +15,16 @@ properties: oneOf: - const: allwinner,sun4i-a10-crypto - items:

•    - const: allwinner,sun5i-a13-crypto
  

•    - const: allwinner,sun4i-a10-crypto
  

•      - const: allwinner,sun5i-a13-crypto
  

•      - const: allwinner,sun4i-a10-crypto
   - items:
  

•    - const: allwinner,sun6i-a31-crypto
  

•    - const: allwinner,sun4i-a10-crypto
  

•      - const: allwinner,sun6i-a31-crypto
  

•      - const: allwinner,sun4i-a10-crypto
   - items:
  

•    - const: allwinner,sun7i-a20-crypto
  

•    - const: allwinner,sun4i-a10-crypto
  

•      - const: allwinner,sun7i-a20-crypto
  

•      - const: allwinner,sun4i-a10-crypto
   - items:
  

•    - const: allwinner,sun8i-a33-crypto
  

•      - const: allwinner,sun8i-a33-crypto
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml index 2c459b8c76ff..7a60d84289cc 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -50,16 +50,16 @@ if: const: allwinner,sun50i-h6-crypto then: properties:

•  clocks:
  

•    minItems: 3
  

•  clock-names:
  

•    minItems: 3
  

• clocks:

•  minItems: 3
  

• clock-names:

•  minItems: 3
  

else: properties:

•  clocks:
  

•    maxItems: 2
  

•  clock-names:
  

•    maxItems: 2
  

• clocks:

•  maxItems: 2
  

• clock-names:

•  maxItems: 2
  
  

required:

• compatible

diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml index 5becc60a0e28..385b23d255c3 100644 --- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml @@ -12,7 +12,7 @@ maintainers: properties: compatible: items:

• • const: amlogic,gxl-crypto

•  - const: amlogic,gxl-crypto
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml index 5d4915aed1e2..75e6479397a5 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml @@ -21,8 +21,8 @@ properties: - const: allwinner,sun5i-a10s-hdmi - const: allwinner,sun6i-a31-hdmi - items:

•    - const: allwinner,sun7i-a20-hdmi
  

•    - const: allwinner,sun5i-a10s-hdmi
  

•      - const: allwinner,sun7i-a20-hdmi
  

•      - const: allwinner,sun5i-a10s-hdmi
  
  

  reg: maxItems: 1

@@ -33,32 +33,32 @@ properties: clocks: oneOf: - items:

•    - description: The HDMI interface clock
  

•    - description: The HDMI module clock
  

•    - description: The first video PLL
  

•    - description: The second video PLL
  

•      - description: The HDMI interface clock
  

•      - description: The HDMI module clock
  

•      - description: The first video PLL
  

•      - description: The second video PLL
  
   - items:
  

•    - description: The HDMI interface clock
  

•    - description: The HDMI module clock
  

•    - description: The HDMI DDC clock
  

•    - description: The first video PLL
  

•    - description: The second video PLL
  

•      - description: The HDMI interface clock
  

•      - description: The HDMI module clock
  

•      - description: The HDMI DDC clock
  

•      - description: The first video PLL
  

•      - description: The second video PLL
  
  

  clock-names: oneOf: - items:

•    - const: ahb
  

•    - const: mod
  

•    - const: pll-0
  

•    - const: pll-1
  

•      - const: ahb
  

•      - const: mod
  

•      - const: pll-0
  

•      - const: pll-1
  
   - items:
  

•    - const: ahb
  

•    - const: mod
  

•    - const: ddc
  

•    - const: pll-0
  

•    - const: pll-1
  

•      - const: ahb
  

•      - const: mod
  

•      - const: ddc
  

•      - const: pll-0
  

•      - const: pll-1
  
  

  resets: maxItems: 1

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index e5344c4ae226..87cb77b32ee3 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -35,26 +35,26 @@ properties: - const: allwinner,sun9i-a80-tcon-tv

   - items:

•    - enum:
  

•      - allwinner,sun7i-a20-tcon0
  

•      - allwinner,sun7i-a20-tcon1
  

•    - const: allwinner,sun7i-a20-tcon
  

•      - enum:
  

•          - allwinner,sun7i-a20-tcon0
  

•          - allwinner,sun7i-a20-tcon1
  

•      - const: allwinner,sun7i-a20-tcon
  
   - items:
  

•    - enum:
  

•        - allwinner,sun50i-a64-tcon-lcd
  

•    - const: allwinner,sun8i-a83t-tcon-lcd
  

•      - enum:
  

•          - allwinner,sun50i-a64-tcon-lcd
  

•      - const: allwinner,sun8i-a83t-tcon-lcd
  
   - items:
  

•    - enum:
  

•      - allwinner,sun8i-h3-tcon-tv
  

•      - allwinner,sun50i-a64-tcon-tv
  

•    - const: allwinner,sun8i-a83t-tcon-tv
  

•      - enum:
  

•          - allwinner,sun8i-h3-tcon-tv
  

•          - allwinner,sun50i-a64-tcon-tv
  

•      - const: allwinner,sun8i-a83t-tcon-tv
  
   - items:
  

•    - enum:
  

•      - allwinner,sun50i-h6-tcon-tv
  

•    - const: allwinner,sun8i-r40-tcon-tv
  

•      - enum:
  

•          - allwinner,sun50i-h6-tcon-tv
  

•      - const: allwinner,sun8i-r40-tcon-tv
  
  

  reg: maxItems: 1

@@ -83,37 +83,37 @@ properties: resets: anyOf: - items:

•    - description: TCON Reset Line
  

•      - description: TCON Reset Line
  
   - items:
  

•    - description: TCON Reset Line
  

•    - description: TCON LVDS Reset Line
  

•      - description: TCON Reset Line
  

•      - description: TCON LVDS Reset Line
  
   - items:
  

•    - description: TCON Reset Line
  

•    - description: TCON eDP Reset Line
  

•      - description: TCON Reset Line
  

•      - description: TCON eDP Reset Line
  
   - items:
  

•    - description: TCON Reset Line
  

•    - description: TCON eDP Reset Line
  

•    - description: TCON LVDS Reset Line
  

•      - description: TCON Reset Line
  

•      - description: TCON eDP Reset Line
  

•      - description: TCON LVDS Reset Line
  
  

  reset-names: oneOf: - const: lcd

   - items:
  

•    - const: lcd
  

•    - const: lvds
  

•      - const: lcd
  

•      - const: lvds
  
   - items:
  

•    - const: lcd
  

•    - const: edp
  

•      - const: lcd
  

•      - const: edp
  
   - items:
  

•    - const: lcd
  

•    - const: edp
  

•    - const: lvds
  

•      - const: lcd
  

•      - const: edp
  

•      - const: lvds
  
  

  ports: type: object

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 9e90c2b00960..eed05b26cdf3 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -76,28 +76,28 @@ required: allOf:

• if: properties:

•     compatible:
  

•       contains:
  

•         const: allwinner,sun6i-a31-mipi-dsi
  

•    compatible:
  

•      contains:
  

•        const: allwinner,sun6i-a31-mipi-dsi
  
  

  then:

•    properties:
  

•      clocks:
  

•        minItems: 2
  

•  properties:
  

•    clocks:
  

•      minItems: 2
  
  

•    required:
  

•      - clock-names
  

•  required:
  

•    - clock-names
  
  

  • if: properties:

•     compatible:
  

•       contains:
  

•         const: allwinner,sun50i-a64-mipi-dsi
  

•    compatible:
  

•      contains:
  

•        const: allwinner,sun50i-a64-mipi-dsi
  
  

  then:

•    properties:
  

•      clocks:
  

•        minItems: 1
  

•  properties:
  

•    clocks:
  

•      minItems: 1
  
  

additionalProperties: false

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 4d6795690ac3..fa4769a0b26e 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -29,11 +29,11 @@ properties: - const: allwinner,sun50i-h6-dw-hdmi

   - items:

•    - enum:
  

•      - allwinner,sun8i-h3-dw-hdmi
  

•      - allwinner,sun8i-r40-dw-hdmi
  

•      - allwinner,sun50i-a64-dw-hdmi
  

•    - const: allwinner,sun8i-a83t-dw-hdmi
  

•      - enum:
  

•          - allwinner,sun8i-h3-dw-hdmi
  

•          - allwinner,sun8i-r40-dw-hdmi
  

•          - allwinner,sun50i-a64-dw-hdmi
  

•      - const: allwinner,sun8i-a83t-dw-hdmi
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 8f373029f5d2..e737951f5873 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -32,17 +32,17 @@ properties: compatible: oneOf: - items:

•    - enum:
  

•      - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
  

•      - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
  

•      - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
  

•    - const: lvds-encoder # Generic LVDS encoder compatible fallback
  

•      - enum:
  

•          - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
  

•          - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
  

•          - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
  

•      - const: lvds-encoder # Generic LVDS encoder compatible fallback
   - items:
  

•    - enum:
  

•      - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
  

•    - const: lvds-decoder # Generic LVDS decoders compatible fallback
  

•      - enum:
  

•          - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
  

•      - const: lvds-decoder # Generic LVDS decoders compatible fallback
   - enum:
  

•    - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
  

•      - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
  
  

  ports: type: object

diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml index 185dcc8fd1f9..78d060097052 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -18,7 +18,7 @@ properties: reg: true reset-gpios: true vddi-supply:

• description: regulator that supplies the vddi voltage
  

• description: regulator that supplies the vddi voltage enforce-video-mode: true

required: diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index d9fdb58e06b4..891de2256d22 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply:

• description: regulator that supplies the iovcc voltage
  

• description: regulator that supplies the iovcc voltage vci-supply:

• description: regulator that supplies the vci voltage
  

• description: regulator that supplies the vci voltage

required:

• compatible

diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml index a57037b9e9ba..005406c89507 100644 --- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml +++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml @@ -21,15 +21,15 @@ properties: compatible: oneOf: - items:

•    - enum:
  

•      - renesas,r8a7795-cmm
  

•      - renesas,r8a7796-cmm
  

•      - renesas,r8a77965-cmm
  

•      - renesas,r8a77990-cmm
  

•      - renesas,r8a77995-cmm
  

•    - const: renesas,rcar-gen3-cmm
  

•      - enum:
  

•          - renesas,r8a7795-cmm
  

•          - renesas,r8a7796-cmm
  

•          - renesas,r8a77965-cmm
  

•          - renesas,r8a77990-cmm
  

•          - renesas,r8a77995-cmm
  

•      - const: renesas,rcar-gen3-cmm
   - items:
  

•    - const: renesas,rcar-gen2-cmm
  

•      - const: renesas,rcar-gen2-cmm
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 39ea05e6e5ff..85056982a242 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -69,10 +69,10 @@ properties: maxItems: 3

reg-names:

• items:

• - const: gcfg
  

• - const: rchanrt
  

• - const: tchanrt
  

• items:

•  - const: gcfg
  

•  - const: rchanrt
  

•  - const: tchanrt
  
  

  msi-parent: true

diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml index 5f1ed20e43ee..4f2cbd8307a7 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml @@ -27,7 +27,7 @@ properties: gpio-controller: true

'#gpio-cells':

•  const: 2
  

• const: 2

  ngpios: minimum: 0

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 0407e45eb8c4..a7a67e0a42e5 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -16,33 +16,33 @@ properties: oneOf: - items: - enum:

•         - samsung,exynos5250-mali
  

•          - samsung,exynos5250-mali
       - const: arm,mali-t604
   - items:
       - enum:
  

•         - samsung,exynos5420-mali
  

•          - samsung,exynos5420-mali
       - const: arm,mali-t628
   - items:
       - enum:
  

•         - allwinner,sun50i-h6-mali
  

•          - allwinner,sun50i-h6-mali
       - const: arm,mali-t720
   - items:
       - enum:
  

•         - amlogic,meson-gxm-mali
  

•         - realtek,rtd1295-mali
  

•          - amlogic,meson-gxm-mali
  

•          - realtek,rtd1295-mali
       - const: arm,mali-t820
   - items:
       - enum:
  

•         - arm,juno-mali
  

•          - arm,juno-mali
       - const: arm,mali-t624
   - items:
       - enum:
  

•         - rockchip,rk3288-mali
  

•         - samsung,exynos5433-mali
  

•          - rockchip,rk3288-mali
  

•          - samsung,exynos5433-mali
       - const: arm,mali-t760
   - items:
       - enum:
  

•         - rockchip,rk3399-mali
  

•          - rockchip,rk3399-mali
       - const: arm,mali-t860
  
       # "arm,mali-t830"
  

diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml index 0bc4b38d5cbb..e1ac6ff5a230 100644 --- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -9,7 +9,7 @@ title: Vivante GPU Bindings description: Vivante GPU core devices

maintainers:

• • Lucas Stach l.stach@pengutronix.de

• • Lucas Stach l.stach@pengutronix.de

properties: compatible: diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 61eac76c84c4..790aa7218ee0 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -28,14 +28,14 @@ properties: - const: rockchip,rk3399-i2c - items: - enum:

•        - rockchip,rk3036-i2c
  

•        - rockchip,rk3368-i2c
  

•          - rockchip,rk3036-i2c
  

•          - rockchip,rk3368-i2c
       - const: rockchip,rk3288-i2c
   - items:
       - enum:
  

•        - rockchip,px30-i2c
  

•        - rockchip,rk3308-i2c
  

•        - rockchip,rk3328-i2c
  

•          - rockchip,px30-i2c
  

•          - rockchip,rk3308-i2c
  

•          - rockchip,rk3328-i2c
       - const: rockchip,rk3399-i2c
  
  

  reg:

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index f0934b295edc..97087a45ce54 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -72,8 +72,8 @@ patternProperties: The channel number. It can have up to 8 channels on ad7124-4 and 16 channels on ad7124-8, numbered from 0 to 15. items:

•     minimum: 0
  

•     maximum: 15
  

•      minimum: 0
  

•      maximum: 15
  
   adi,reference-select:
     description: |
  

diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 118809a03279..97f521d654ea 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology / Analog Devices LTC2496 ADC

maintainers:

• • Lars-Peter Clausen lars@metafoo.de
• • Michael Hennerich Michael.Hennerich@analog.com
• • Stefan Popa stefan.popa@analog.com

• • Lars-Peter Clausen lars@metafoo.de
• • Michael Hennerich Michael.Hennerich@analog.com
• • Stefan Popa stefan.popa@analog.com

properties: compatible: diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 5b3b71c9c018..512a6af5aa42 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -16,8 +16,8 @@ properties: - const: allwinner,sun4i-a10-lradc-keys - const: allwinner,sun8i-a83t-r-lradc - items:

•    - const: allwinner,sun50i-a64-lradc
  

•    - const: allwinner,sun8i-a83t-r-lradc
  

•      - const: allwinner,sun50i-a64-lradc
  

•      - const: allwinner,sun8i-a83t-r-lradc
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index c8ea9434c9cc..e81cfa56f25a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -63,7 +63,7 @@ required:

• interrupts

examples: -- |

• • | i2c { #address-cells = <1>; #size-cells = <0>;

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml index 4107e60cab12..e1009ae4e8f7 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml @@ -10,8 +10,8 @@ maintainers:

• Georgi Djakov georgi.djakov@linaro.org

description: |

• The Qualcomm MSM8916 interconnect providers support adjusting the
• bandwidth requirements between the various NoC fabrics.

• The Qualcomm MSM8916 interconnect providers support adjusting the
• bandwidth requirements between the various NoC fabrics.

properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml index 9af3c6e59cff..8004c4baf397 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml @@ -10,8 +10,8 @@ maintainers:

• Brian Masney masneyb@onstation.org

description: |

• The Qualcomm MSM8974 interconnect providers support setting system
• bandwidth requirements between various network-on-chip fabrics.

• The Qualcomm MSM8974 interconnect providers support setting system
• bandwidth requirements between various network-on-chip fabrics.

properties: reg: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml index 8d65c5f80679..3fbb8785fbc9 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml @@ -10,8 +10,8 @@ maintainers:

• Georgi Djakov georgi.djakov@linaro.org

description: |

• The Qualcomm QCS404 interconnect providers support adjusting the
• bandwidth requirements between the various NoC fabrics.

• The Qualcomm QCS404 interconnect providers support adjusting the
• bandwidth requirements between the various NoC fabrics.

properties: reg: diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml index cf09055da78b..7cd6b8bacfa0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -27,15 +27,15 @@ properties: deprecated: true - const: allwinner,sun7i-a20-sc-nmi - items:

•    - const: allwinner,sun8i-a83t-r-intc
  

•    - const: allwinner,sun6i-a31-r-intc
  

•      - const: allwinner,sun8i-a83t-r-intc
  

•      - const: allwinner,sun6i-a31-r-intc
   - const: allwinner,sun9i-a80-sc-nmi
   - items:
  

•    - const: allwinner,sun50i-a64-r-intc
  

•    - const: allwinner,sun6i-a31-r-intc
  

•      - const: allwinner,sun50i-a64-r-intc
  

•      - const: allwinner,sun6i-a31-r-intc
   - items:
  

•    - const: allwinner,sun50i-h6-r-intc
  

•    - const: allwinner,sun6i-a31-r-intc
  

•      - const: allwinner,sun50i-h6-r-intc
  

•      - const: allwinner,sun6i-a31-r-intc
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml index ccc507f384d2..14dced11877b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -25,10 +25,10 @@ properties: compatible: items: - enum:

•    - intel,ixp42x-interrupt
  

•    - intel,ixp43x-interrupt
  

•    - intel,ixp45x-interrupt
  

•    - intel,ixp46x-interrupt
  

•      - intel,ixp42x-interrupt
  

•      - intel,ixp43x-interrupt
  

•      - intel,ixp45x-interrupt
  

•      - intel,ixp46x-interrupt
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml index 9e5c6608b4e3..2a5b29567926 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml @@ -14,13 +14,13 @@ properties: compatible: oneOf: - items:

•    - enum:
  

•      - st,stm32-exti
  

•      - st,stm32h7-exti
  

•      - enum:
  

•          - st,stm32-exti
  

•          - st,stm32h7-exti
   - items:
  

•    - enum:
  

•      - st,stm32mp1-exti
  

•    - const: syscon
  

•      - enum:
  

•          - st,stm32mp1-exti
  

•      - const: syscon
  
  

  "#interrupt-cells": const: 2

diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml index 0e33cd9e010e..af51b91c893e 100644 --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml @@ -54,13 +54,13 @@ properties: clock-names: oneOf: - items:

•    - const: sysmmu
  

•      - const: sysmmu
   - items:
  

•    - const: sysmmu
  

•    - const: master
  

•      - const: sysmmu
  

•      - const: master
   - items:
  

•    - const: aclk
  

•    - const: pclk
  

•      - const: aclk
  

•      - const: pclk
  
  

  "#iommu-cells": const: 0

diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml index 5b13d6672996..db851541d619 100644 --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -24,7 +24,7 @@ properties: maxItems: 1

clocks:

• maxItems: 1
  

• maxItems: 1

  interrupts: items:

diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index 8453ee340b9f..09318830db47 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -20,11 +20,11 @@ properties: - const: allwinner,sun4i-a10-csi1 - const: allwinner,sun7i-a20-csi0 - items:

•    - const: allwinner,sun7i-a20-csi1
  

•    - const: allwinner,sun4i-a10-csi1
  

•      - const: allwinner,sun7i-a20-csi1
  

•      - const: allwinner,sun4i-a10-csi1
   - items:
  

•    - const: allwinner,sun8i-r40-csi0
  

•    - const: allwinner,sun7i-a20-csi0
  

•      - const: allwinner,sun8i-r40-csi0
  

•      - const: allwinner,sun7i-a20-csi0
  
  

  reg: maxItems: 1

@@ -35,24 +35,24 @@ properties: clocks: oneOf: - items:

•    - description: The CSI interface clock
  

•    - description: The CSI DRAM clock
  

•      - description: The CSI interface clock
  

•      - description: The CSI DRAM clock
  
   - items:
  

•    - description: The CSI interface clock
  

•    - description: The CSI ISP clock
  

•    - description: The CSI DRAM clock
  

•      - description: The CSI interface clock
  

•      - description: The CSI ISP clock
  

•      - description: The CSI DRAM clock
  
  

  clock-names: oneOf: - items:

•    - const: bus
  

•    - const: ram
  

•      - const: bus
  

•      - const: ram
  
   - items:
  

•    - const: bus
  

•    - const: isp
  

•    - const: ram
  

•      - const: bus
  

•      - const: isp
  

•      - const: ram
  
  

  resets: maxItems: 1

diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 37d77e065491..5a1da4029c37 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -29,14 +29,14 @@ properties: compatible: oneOf: - items:

•    - enum:
  

•      - amlogic,gxbb-vdec # GXBB (S905)
  

•      - amlogic,gxl-vdec # GXL (S905X, S905D)
  

•      - amlogic,gxm-vdec # GXM (S912)
  

•    - const: amlogic,gx-vdec
  

•      - enum:
  

•          - amlogic,gxbb-vdec # GXBB (S905)
  

•          - amlogic,gxl-vdec # GXL (S905X, S905D)
  

•          - amlogic,gxm-vdec # GXM (S912)
  

•      - const: amlogic,gx-vdec
   - enum:
  

•    - amlogic,g12a-vdec # G12A (S905X2, S905D2)
  

•    - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
  

•      - amlogic,g12a-vdec # G12A (S905X2, S905D2)
  

•      - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
  
  

  interrupts: minItems: 2

diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml index fcb5f13704a5..f2393458814e 100644 --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml @@ -32,23 +32,23 @@ properties: additionalProperties: false

 properties:

•   endpoint:
  

•     type: object
  

•     additionalProperties: false
  

•  endpoint:
  

•    type: object
  

•    additionalProperties: false
  
      # Properties described in
      # Documentation/devicetree/bindings/media/video-interfaces.txt
  

•     properties:
  

•       remote-endpoint: true
  

•       hsync-active: true
  

•       vsync-active: true
  

•       field-even-active: false
  

•       bus-width:
  

•         enum: [8, 16]
  

•         default: 8
  

•     required:
  

•       - remote-endpoint
  

•    properties:
  

•      remote-endpoint: true
  

•      hsync-active: true
  

•      vsync-active: true
  

•      field-even-active: false
  

•      bus-width:
  

•        enum: [8, 16]
  

•        default: 8
  

•    required:
  

•      - remote-endpoint
  
  

  required: - endpoint

diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index 1ec947b4781f..ecc09f1124d4 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -261,13 +261,13 @@ properties:

     anyOf:
       - required:

•        - endpoint@0
  

•          - endpoint@0
       - required:
  

•        - endpoint@1
  

•          - endpoint@1
       - required:
  

•        - endpoint@2
  

•          - endpoint@2
       - required:
  

•        - endpoint@3
  

•          - endpoint@3
  
     additionalProperties: false
  
  

diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml index f3a8a350e85f..ef473f287399 100644 --- a/Documentation/devicetree/bindings/media/ti,vpe.yaml +++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml @@ -17,7 +17,7 @@ description: |-

properties: compatible:

•  const: ti,dra7-vpe
  

• const: ti,dra7-vpe

  reg: items:

diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml index c9e6c22cb5be..445e46feda69 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml @@ -25,9 +25,9 @@ properties: compatible: items: - enum:

•    - fsl,imx8mn-ddrc
  

•    - fsl,imx8mm-ddrc
  

•    - fsl,imx8mq-ddrc
  

•      - fsl,imx8mn-ddrc
  

•      - fsl,imx8mm-ddrc
  

•      - fsl,imx8mq-ddrc
   - const: fsl,imx8m-ddrc
  
  

  reg:

diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index ddf190cb800b..e675611f80d0 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -66,8 +66,8 @@ patternProperties: reg: description: Identify trigger hardware block. items:

•     minimum: 0
  

•     maximum: 2
  

•      minimum: 0
  

•      maximum: 2
  
  

  required: - compatible

diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index 590849ee9f32..4acda7ce3b44 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -102,8 +102,8 @@ patternProperties: reg: description: Identify trigger hardware block. items:

•     minimum: 0
  

•     maximum: 16
  

•      minimum: 0
  

•      maximum: 16
  
  

  required: - compatible

diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 39375e4313d2..7a39486b215a 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -33,13 +33,13 @@ properties: compatible: anyOf: - items:

•    - enum:
  

•      - allwinner,sun8i-a83t-system-controller
  

•      - allwinner,sun8i-h3-system-controller
  

•      - allwinner,sun8i-v3s-system-controller
  

•      - allwinner,sun50i-a64-system-controller
  

•      - enum:
  

•          - allwinner,sun8i-a83t-system-controller
  

•          - allwinner,sun8i-h3-system-controller
  

•          - allwinner,sun8i-v3s-system-controller
  

•          - allwinner,sun50i-a64-system-controller
  
  

•    - const: syscon
  

•      - const: syscon
  
   - contains:
       const: syscon
  

diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index 2f45dd0d04db..d43a0c557a44 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -17,7 +17,7 @@ properties: compatible: items: - enum:

•     - socionext,uniphier-sd4hc
  

•      - socionext,uniphier-sd4hc
   - const: cdns,sd4hc
  
  

  reg:

diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 89c3edd6a728..4ee3ed6efab4 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -30,21 +30,21 @@ properties: - items: - enum: # for Rockchip PX30

•        - rockchip,px30-dw-mshc
  

•          - rockchip,px30-dw-mshc
         # for Rockchip RK3036
  

•        - rockchip,rk3036-dw-mshc
  

•          - rockchip,rk3036-dw-mshc
         # for Rockchip RK322x
  

•        - rockchip,rk3228-dw-mshc
  

•          - rockchip,rk3228-dw-mshc
         # for Rockchip RK3308
  

•        - rockchip,rk3308-dw-mshc
  

•          - rockchip,rk3308-dw-mshc
         # for Rockchip RK3328
  

•        - rockchip,rk3328-dw-mshc
  

•          - rockchip,rk3328-dw-mshc
         # for Rockchip RK3368
  

•        - rockchip,rk3368-dw-mshc
  

•          - rockchip,rk3368-dw-mshc
         # for Rockchip RK3399
  

•        - rockchip,rk3399-dw-mshc
  

•          - rockchip,rk3399-dw-mshc
         # for Rockchip RV1108
  

•        - rockchip,rv1108-dw-mshc
  

•          - rockchip,rv1108-dw-mshc
       - const: rockchip,rk3288-dw-mshc
  
  

  reg:

diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml index cdfac9b4411b..8d6413f48823 100644 --- a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml @@ -35,15 +35,15 @@ properties: oneOf: - const: host - items:

•    - const: host
  

•    - const: bridge
  

•      - const: host
  

•      - const: bridge
   - items:
  

•    - const: host
  

•    - const: hw
  

•      - const: host
  

•      - const: hw
   - items:
  

•    - const: host
  

•    - const: bridge
  

•    - const: hw
  

•      - const: host
  

•      - const: bridge
  

•      - const: hw
  
  

  resets: minItems: 1

diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml index 46e6b6726bc0..c07b91592cbd 100644 --- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -54,8 +54,8 @@ properties: reg: register reset oneOf: - items:

•    - const: nand
  

•    - const: reg
  

•      - const: nand
  

•      - const: reg
   - const: nand
   - const: reg
  
  

diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index db36b4d86484..c7c9ad4e3f9f 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -19,8 +19,8 @@ properties: - const: allwinner,sun8i-v3s-emac - const: allwinner,sun50i-a64-emac - items:

•    - const: allwinner,sun50i-h6-emac
  

•    - const: allwinner,sun50i-a64-emac
  

•      - const: allwinner,sun50i-h6-emac
  

•      - const: allwinner,sun50i-a64-emac
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index cccf8202c8f7..7a784dc4e513 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -9,7 +9,7 @@ title: Bosch MCAN controller Bindings description: Bosch MCAN controller for CAN bus

maintainers:

• • Sriram Dash sriram.dash@samsung.com

• • Sriram Dash sriram.dash@samsung.com

properties: compatible: @@ -51,31 +51,31 @@ properties:

bosch,mram-cfg: description: |

•             Message RAM configuration data.
  

•             Multiple M_CAN instances can share the same Message RAM
  

•             and each element(e.g Rx FIFO or Tx Buffer and etc) number
  

•             in Message RAM is also configurable, so this property is
  

•             telling driver how the shared or private Message RAM are
  

•             used by this M_CAN controller.
  

•             The format should be as follows:
  

•             <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
  

•             The 'offset' is an address offset of the Message RAM where
  

•             the following elements start from. This is usually set to
  

•             0x0 if you're using a private Message RAM. The remain cells
  

•             are used to specify how many elements are used for each FIFO/Buffer.
  

•             M_CAN includes the following elements according to user manual:
  

•             11-bit Filter	0-128 elements / 0-128 words
  

•             29-bit Filter	0-64 elements / 0-128 words
  

•             Rx FIFO 0	0-64 elements / 0-1152 words
  

•             Rx FIFO 1	0-64 elements / 0-1152 words
  

•             Rx Buffers	0-64 elements / 0-1152 words
  

•             Tx Event FIFO	0-32 elements / 0-64 words
  

•             Tx Buffers	0-32 elements / 0-576 words
  

•             Please refer to 2.4.1 Message RAM Configuration in Bosch
  

•             M_CAN user manual for details.
  

•  Message RAM configuration data.
  

•  Multiple M_CAN instances can share the same Message RAM
  

•  and each element(e.g Rx FIFO or Tx Buffer and etc) number
  

•  in Message RAM is also configurable, so this property is
  

•  telling driver how the shared or private Message RAM are
  

•  used by this M_CAN controller.
  

•  The format should be as follows:
  

•  <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
  

•  The 'offset' is an address offset of the Message RAM where
  

•  the following elements start from. This is usually set to
  

•  0x0 if you're using a private Message RAM. The remain cells
  

•  are used to specify how many elements are used for each FIFO/Buffer.
  

•  M_CAN includes the following elements according to user manual:
  

•  11-bit Filter	0-128 elements / 0-128 words
  

•  29-bit Filter	0-64 elements / 0-128 words
  

•  Rx FIFO 0	0-64 elements / 0-1152 words
  

•  Rx FIFO 1	0-64 elements / 0-1152 words
  

•  Rx Buffers	0-64 elements / 0-1152 words
  

•  Tx Event FIFO	0-32 elements / 0-64 words
  

•  Tx Buffers	0-32 elements / 0-576 words
  

•  Please refer to 2.4.1 Message RAM Configuration in Bosch
  

•  M_CAN user manual for details.
  

  allOf: - $ref: /schemas/types.yaml#/definitions/int32-array - items:

diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 7f84df9790e2..2eaa8799e002 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -40,8 +40,8 @@ properties:

reg: items:

•   - description: E-DMAC/feLic registers
  

•   - description: TSU registers
  

•  - description: E-DMAC/feLic registers
  

•  - description: TSU registers
  

  minItems: 1

  interrupts:

diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 976f139bb66e..8fc8d3be303b 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -23,14 +23,14 @@ properties: oneOf: - const: ti,cpsw-switch - items:

•     - const: ti,am335x-cpsw-switch
  

•     - const: ti,cpsw-switch
  

•      - const: ti,am335x-cpsw-switch
  

•      - const: ti,cpsw-switch
   - items:
  

•    - const: ti,am4372-cpsw-switch
  

•    - const: ti,cpsw-switch
  

•      - const: ti,am4372-cpsw-switch
  

•      - const: ti,cpsw-switch
   - items:
  

•    - const: ti,dra7-cpsw-switch
  

•    - const: ti,cpsw-switch
  

•      - const: ti,dra7-cpsw-switch
  

•      - const: ti,cpsw-switch
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 242ac4935a4b..2ea14ab29254 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -18,25 +18,24 @@ allOf: properties: compatible: oneOf:

•   - const: ti,davinci_mdio
  

•   - items:
  

•     - const: ti,keystone_mdio
  

•     - const: ti,davinci_mdio
  

•   - items:
  

•     - const: ti,cpsw-mdio
  

•     - const: ti,davinci_mdio
  

•   - items:
  

•     - const: ti,am4372-mdio
  

•     - const: ti,cpsw-mdio
  

•     - const: ti,davinci_mdio
  

•  - const: ti,davinci_mdio
  

•  - items:
  

•      - const: ti,keystone_mdio
  

•      - const: ti,davinci_mdio
  

•  - items:
  

•      - const: ti,cpsw-mdio
  

•      - const: ti,davinci_mdio
  

•  - items:
  

•      - const: ti,am4372-mdio
  

•      - const: ti,cpsw-mdio
  

•      - const: ti,davinci_mdio
  
  

  reg: maxItems: 1

  bus_freq:

•  maximum: 2500000
  

•  description:
  

•    MDIO Bus frequency
  

• maximum: 2500000

• description: MDIO Bus frequency

  ti,hwmods: description: TI hwmod name

diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index 9a346d6290d9..77bb5309918e 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -23,7 +23,7 @@ description: |+

properties: compatible:

•  const: intel,lgm-emmc-phy
  

• const: intel,lgm-emmc-phy

  "#phy-cells": const: 0

diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml index ea7f32905172..4fe64f4dd594 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -49,17 +49,17 @@ properties: are available. oneOf: - items:

•    - const: timers
  

•      - const: timers
   - items:
  

•    - const: timers
  

•    - const: pwm-tclk0
  

•      - const: timers
  

•      - const: pwm-tclk0
   - items:
  

•    - const: timers
  

•    - const: pwm-tclk1
  

•      - const: timers
  

•      - const: pwm-tclk1
   - items:
  

•    - const: timers
  

•    - const: pwm-tclk0
  

•    - const: pwm-tclk1
  

•      - const: timers
  

•      - const: pwm-tclk0
  

•      - const: pwm-tclk1
  
  

  interrupts: description:

diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index c0d83865e933..4ff4d3df0a06 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -25,7 +25,7 @@ properties: maxItems: 3

resets:

• maxItems: 1
  

• maxItems: 1

  st,syscfg-holdboot: allOf:

diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml index 512a33bdb208..dfce6738b033 100644 --- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml @@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"

title: BCM7216 RESCAL reset controller

-description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216. +description: This document describes the BCM7216 RESCAL reset controller

• which is responsible for controlling the reset of the SATA and PCIe0/1
• instances on BCM7216.

maintainers:

• Florian Fainelli f.fainelli@gmail.com

diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 48c6cafca90c..57b087574aa1 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -38,10 +38,10 @@ properties: minItems: 3 maxItems: 3 description: |

•   Phandle/offset/mask triplet. The phandle to pwrcfg used to
  

•   access control register at offset, and change the dbp (Disable Backup
  

•   Protection) bit represented by the mask, mandatory to disable/enable backup
  

•   domain (RTC registers) write protection.
  

•  Phandle/offset/mask triplet. The phandle to pwrcfg used to
  

•  access control register at offset, and change the dbp (Disable Backup
  

•  Protection) bit represented by the mask, mandatory to disable/enable backup
  

•  domain (RTC registers) write protection.
  
  

  assigned-clocks: description: |

@@ -78,14 +78,14 @@ allOf: const: st,stm32h7-rtc

 then:

•   properties:
  

•     clocks:
  

•       minItems: 2
  

•       maxItems: 2
  

•  properties:
  

•    clocks:
  

•      minItems: 2
  

•      maxItems: 2
  
  

•   required:
  

•     - clock-names
  

•     - st,syscfg
  

•  required:
  

•    - clock-names
  

•    - st,syscfg
  
  

  • if: properties:

@@ -94,16 +94,16 @@ allOf: const: st,stm32mp1-rtc

 then:

•   properties:
  

•     clocks:
  

•       minItems: 2
  

•       maxItems: 2
  

•  properties:
  

•    clocks:
  

•      minItems: 2
  

•      maxItems: 2
  
  

•     assigned-clocks: false
  

•     assigned-clock-parents: false
  

•    assigned-clocks: false
  

•    assigned-clock-parents: false
  
  

•   required:
  

•     - clock-names
  

•  required:
  

•    - clock-names
  
  

required:

• compatible

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index d4178ab0d675..75ebc9952a99 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -24,18 +24,18 @@ properties: oneOf: - description: Always-on power domain UART controller items:

•    - enum:
  

•      - enum:
  

•          - amlogic,meson6-uart
  

•          - amlogic,meson8-uart
  

•          - amlogic,meson8b-uart
  

•          - amlogic,meson-gx-uart
  

•      - const: amlogic,meson-ao-uart
  

•  - description: Everything-Else power domain UART controller
  

•    enum:
       - amlogic,meson6-uart
       - amlogic,meson8-uart
       - amlogic,meson8b-uart
       - amlogic,meson-gx-uart
  

•    - const: amlogic,meson-ao-uart
  

•  - description: Everything-Else power domain UART controller
  

•    enum:
  

•    - amlogic,meson6-uart
  

•    - amlogic,meson8-uart
  

•    - amlogic,meson8b-uart
  

•    - amlogic,meson-gx-uart
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index d4beaf11222d..2b8261ea6d9c 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -6,13 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#

title: RS485 serial communications Bindings

-description: The RTS signal is capable of automatically controlling

•         line direction for the built-in half-duplex mode.
  

•         The properties described hereafter shall be given to a
  

•         half-duplex capable UART node.
  

+description: The RTS signal is capable of automatically controlling line

• direction for the built-in half-duplex mode. The properties described
• hereafter shall be given to a half-duplex capable UART node.

maintainers:

• • Rob Herring robh@kernel.org

• • Rob Herring robh@kernel.org

properties: rs485-rts-delay: @@ -37,9 +36,11 @@ properties: $ref: /schemas/types.yaml#/definitions/flag

linux,rs485-enabled-at-boot-time:

• description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.

• description: enables the rs485 feature at boot time. It can be disabled

•  later with proper ioctl.
  

  $ref: /schemas/types.yaml#/definitions/flag

  rs485-rx-during-tx:

• description: enables the receiving of data even while sending data.
• $ref: /schemas/types.yaml#/definitions/flag

• description: enables the receiving of data even while sending data.
• $ref: /schemas/types.yaml#/definitions/flag

+... diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml index cb008fd188d8..02b2d5ba01d6 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -26,11 +26,11 @@ properties: compatible: oneOf: - items:

•    - enum:
  

•      - amlogic,meson8-canvas
  

•      - amlogic,meson8b-canvas
  

•      - amlogic,meson8m2-canvas
  

•    - const: amlogic,canvas
  

•      - enum:
  

•          - amlogic,meson8-canvas
  

•          - amlogic,meson8b-canvas
  

•          - amlogic,meson8m2-canvas
  

•      - const: amlogic,canvas
   - const: amlogic,canvas # GXBB and newer SoCs
  
  

  reg:

diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml index d1b65554e681..91cf4176abd5 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml @@ -17,16 +17,16 @@ properties: oneOf: # for FSI2 SoC - items:

•    - enum:
  

•      - renesas,fsi2-sh73a0
  

•      - renesas,fsi2-r8a7740
  

•    - enum:
  

•      - renesas,sh_fsi2
  

•      - enum:
  

•          - renesas,fsi2-sh73a0
  

•          - renesas,fsi2-r8a7740
  

•      - enum:
  

•          - renesas,sh_fsi2
   # for Generic
   - items:
  

•    - enum:
  

•      - renesas,sh_fsi
  

•      - renesas,sh_fsi2
  

•      - enum:
  

•          - renesas,sh_fsi
  

•          - renesas,sh_fsi2
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 0cf470eaf2a0..406286149a6b 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -8,12 +8,12 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Quad Serial Peripheral Interface (QSPI)

maintainers:

• • Mukesh Savaliya msavaliy@codeaurora.org
• • Akash Asthana akashast@codeaurora.org

• • Mukesh Savaliya msavaliy@codeaurora.org
• • Akash Asthana akashast@codeaurora.org

-description:

• The QSPI controller allows SPI protocol communication in single, dual, or quad
• wire transmission modes for read/write access to slaves such as NOR flash.

+description: The QSPI controller allows SPI protocol communication in single,

• dual, or quad wire transmission modes for read/write access to slaves such
• as NOR flash.

allOf:

• $ref: /spi/spi-controller.yaml#

diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml index c429cf4bea5b..f492cb9fea12 100644 --- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml @@ -16,8 +16,8 @@ properties: compatible: items: - enum:

•    - renesas,hspi-r8a7778 # R-Car M1A
  

•    - renesas,hspi-r8a7779 # R-Car H1
  

•      - renesas,hspi-r8a7778 # R-Car M1A
  

•      - renesas,hspi-r8a7779 # R-Car H1
   - const: renesas,hspi
  
  

  reg:

diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index dfb697c69341..22ba4e90655b 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -51,7 +51,7 @@ properties:

pl022,rt: description: indicates the controller should run the message pump with realtime

•           priority to minimise the transfer latency on the bus (boolean)
  

•  priority to minimise the transfer latency on the bus (boolean)
  

  type: boolean

  dmas:

diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml index 3665a5fe6b7f..1a342ce1f798 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml @@ -24,8 +24,8 @@ properties:

reg-names: items:

• - const: qspi
  

• - const: qspi_mm
  

•  - const: qspi
  

•  - const: qspi_mm
  
  

  clocks: maxItems: 1

diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index 4b5509436588..f5825935fd22 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -29,8 +29,8 @@ properties: - const: allwinner,sun4i-a10-system-control - const: allwinner,sun5i-a13-system-control - items:

•    - const: allwinner,sun7i-a20-system-control
  

•    - const: allwinner,sun4i-a10-system-control
  

•      - const: allwinner,sun7i-a20-system-control
  

•      - const: allwinner,sun4i-a10-system-control
   - const: allwinner,sun8i-a23-system-control
   - const: allwinner,sun8i-h3-system-control
   - const: allwinner,sun50i-a64-sram-controller
  

@@ -38,11 +38,11 @@ properties: - const: allwinner,sun50i-a64-system-control - const: allwinner,sun50i-h5-system-control - items:

•    - const: allwinner,sun50i-h6-system-control
  

•    - const: allwinner,sun50i-a64-system-control
  

•      - const: allwinner,sun50i-h6-system-control
  

•      - const: allwinner,sun50i-a64-system-control
   - items:
  

•    - const: allwinner,suniv-f1c100s-system-control
  

•    - const: allwinner,sun4i-a10-system-control
  

•      - const: allwinner,suniv-f1c100s-system-control
  

•      - const: allwinner,sun4i-a10-system-control
  
  

  reg: maxItems: 1

@@ -69,44 +69,44 @@ patternProperties: - const: allwinner,sun4i-a10-sram-d - const: allwinner,sun50i-a64-sram-c - items:

•            - const: allwinner,sun5i-a13-sram-a3-a4
  

•            - const: allwinner,sun4i-a10-sram-a3-a4
  

•              - const: allwinner,sun5i-a13-sram-a3-a4
  

•              - const: allwinner,sun4i-a10-sram-a3-a4
           - items:
  

•            - const: allwinner,sun7i-a20-sram-a3-a4
  

•            - const: allwinner,sun4i-a10-sram-a3-a4
  

•              - const: allwinner,sun7i-a20-sram-a3-a4
  

•              - const: allwinner,sun4i-a10-sram-a3-a4
           - items:
  

•            - const: allwinner,sun5i-a13-sram-c1
  

•            - const: allwinner,sun4i-a10-sram-c1
  

•              - const: allwinner,sun5i-a13-sram-c1
  

•              - const: allwinner,sun4i-a10-sram-c1
           - items:
  

•            - const: allwinner,sun7i-a20-sram-c1
  

•            - const: allwinner,sun4i-a10-sram-c1
  

•              - const: allwinner,sun7i-a20-sram-c1
  

•              - const: allwinner,sun4i-a10-sram-c1
           - items:
  

•            - const: allwinner,sun8i-a23-sram-c1
  

•            - const: allwinner,sun4i-a10-sram-c1
  

•              - const: allwinner,sun8i-a23-sram-c1
  

•              - const: allwinner,sun4i-a10-sram-c1
           - items:
  

•            - const: allwinner,sun8i-h3-sram-c1
  

•            - const: allwinner,sun4i-a10-sram-c1
  

•              - const: allwinner,sun8i-h3-sram-c1
  

•              - const: allwinner,sun4i-a10-sram-c1
           - items:
  

•            - const: allwinner,sun50i-a64-sram-c1
  

•            - const: allwinner,sun4i-a10-sram-c1
  

•              - const: allwinner,sun50i-a64-sram-c1
  

•              - const: allwinner,sun4i-a10-sram-c1
           - items:
  

•            - const: allwinner,sun50i-h5-sram-c1
  

•            - const: allwinner,sun4i-a10-sram-c1
  

•              - const: allwinner,sun50i-h5-sram-c1
  

•              - const: allwinner,sun4i-a10-sram-c1
           - items:
  

•            - const: allwinner,sun50i-h6-sram-c1
  

•            - const: allwinner,sun4i-a10-sram-c1
  

•              - const: allwinner,sun50i-h6-sram-c1
  

•              - const: allwinner,sun4i-a10-sram-c1
           - items:
  

•            - const: allwinner,sun5i-a13-sram-d
  

•            - const: allwinner,sun4i-a10-sram-d
  

•              - const: allwinner,sun5i-a13-sram-d
  

•              - const: allwinner,sun4i-a10-sram-d
           - items:
  

•            - const: allwinner,sun7i-a20-sram-d
  

•            - const: allwinner,sun4i-a10-sram-d
  

•              - const: allwinner,sun7i-a20-sram-d
  

•              - const: allwinner,sun4i-a10-sram-d
           - items:
  

•            - const: allwinner,suniv-f1c100s-sram-d
  

•            - const: allwinner,sun4i-a10-sram-d
  

•              - const: allwinner,suniv-f1c100s-sram-d
  

•              - const: allwinner,sun4i-a10-sram-d
           - items:
  

•            - const: allwinner,sun50i-h6-sram-c
  

•            - const: allwinner,sun50i-a64-sram-c
  

•              - const: allwinner,sun50i-h6-sram-c
  

•              - const: allwinner,sun50i-a64-sram-c
  
  

required:

• "#address-cells"

diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml index e43ec50bda37..999c6b365f1d 100644 --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -13,11 +13,11 @@ description: Binding for Amlogic Thermal

properties: compatible:

•  items:
  

•    - enum:
  

•        - amlogic,g12a-cpu-thermal
  

•        - amlogic,g12a-ddr-thermal
  

•    - const: amlogic,g12a-thermal
  

• items:

•  - enum:
  

•      - amlogic,g12a-cpu-thermal
  

•      - amlogic,g12a-ddr-thermal
  

•  - const: amlogic,g12a-thermal
  
  

  reg: maxItems: 1

diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml index fa255672e8e5..135186f83925 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -28,10 +28,10 @@ properties: - arm,armv7-timer - items: - enum:

•        - arm,armv7-timer
  

•          - arm,armv7-timer
   - items:
       - enum:
  

•        - arm,armv8-timer
  

•          - arm,armv8-timer
  
  

  interrupts: items:

diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 582bbef62b95..6ff718ede184 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -20,7 +20,7 @@ properties: compatible: items: - enum:

•    - arm,armv7-timer-mem
  

•      - arm,armv7-timer-mem
  
  

  reg: maxItems: 1

@@ -77,7 +77,7 @@ patternProperties: - description: physical timer irq - description: virtual timer irq

•  reg :
  

•  reg:
     minItems: 1
     maxItems: 2
     items:
  

diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 0d6d850a7f17..fb2f62aef5fa 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -62,14 +62,14 @@ properties:

resets: items:

• - description: common reset
  

• - description: ecc reset
  

•  - description: common reset
  

•  - description: ecc reset
  

  minItems: 1

  reset-names: items:

• - const: dwc2
  

• - const: dwc2-ecc
  

•  - const: dwc2
  

•  - const: dwc2-ecc
  

  minItems: 1

  phys:

-- 2.20.1