[alsa-devel] [PATCH v2] ASoC: tas2552: Support TI TAS2552 Amplifier
Support the TI TAS2552 Class D amplifier.
The TAS2552 is a high efficiency Class-D audio power amplifier with advanced battery current management and an integrated Class-G boost The device constantly measures the current and voltage across the load and provides a digital stream of this information.
Signed-off-by: Dan Murphy dmurphy@ti.com ---
v2 - Address RFC comments- Added regmap, and snd_soc calls removed debug code, address checkpatch errors -https://patchwork.kernel.org/patch/4378281/
.../devicetree/bindings/sound/tas2552.txt | 22 + include/sound/tas2552-plat.h | 25 ++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2552.c | 462 ++++++++++++++++++++ sound/soc/codecs/tas2552.h | 75 ++++ 6 files changed, 591 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2552.txt create mode 100644 include/sound/tas2552-plat.h create mode 100644 sound/soc/codecs/tas2552.c create mode 100644 sound/soc/codecs/tas2552.h
diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt new file mode 100644 index 0000000..58e931b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2552.txt @@ -0,0 +1,22 @@ +Texas Instruments - tas2552 Codec module + +The tas2552 serial control bus communicates through I2C protocols + +Required properties: + +- compatible - "string" - One of: + "ti,tas2552" - TAS2552 + +- reg - <int> - I2C slave address + +Optional properties: + +- power-gpio - gpio pin to enable/disable the device + +Example: + +tas2552: tas2552@41 { + compatible = "ti,tas2552"; + reg = <0x41>; + power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; +}; diff --git a/include/sound/tas2552-plat.h b/include/sound/tas2552-plat.h new file mode 100644 index 0000000..c8120f2 --- /dev/null +++ b/include/sound/tas2552-plat.h @@ -0,0 +1,25 @@ +/* + * TAS2552 driver platform header + * + * Copyright (C) 2014 Texas Instruments Inc. + * + * Author: Dan Murphy dmurphy@ti.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef TAS2552_PLAT_H +#define TAS2552_PLAT_H + +struct tas2552_platform_data { + int power_gpio; +}; + +#endif diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0b9571c..cc09261 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -99,6 +99,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_TLV320AIC32X4 if I2C select SND_SOC_TLV320AIC3X if I2C select SND_SOC_TPA6130A2 if I2C + select SND_SOC_TAS2552 if I2C select SND_SOC_TLV320DAC33 if I2C select SND_SOC_TWL4030 if TWL4030_CORE select SND_SOC_TWL6040 if TWL6040_CORE @@ -754,4 +755,8 @@ config SND_SOC_TPA6130A2 tristate "Texas Instruments TPA6130A2 headphone amplifier" depends on I2C
+config SND_SOC_TAS2552 + tristate "Texas Instruments TAS2552 Mono Audio amplifier" + depends on I2C + endmenu diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 1bd6e1c..33bc7228 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -162,6 +162,7 @@ snd-soc-wm-hubs-objs := wm_hubs.o # Amp snd-soc-max9877-objs := max9877.o snd-soc-tpa6130a2-objs := tpa6130a2.o +snd-soc-tas2552-objs := tas2552.o
obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AB8500_CODEC) += snd-soc-ab8500-codec.o @@ -325,3 +326,4 @@ obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o # Amp obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o obj-$(CONFIG_SND_SOC_TPA6130A2) += snd-soc-tpa6130a2.o +obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c new file mode 100644 index 0000000..228d5bb --- /dev/null +++ b/sound/soc/codecs/tas2552.c @@ -0,0 +1,462 @@ +/* + * ALSA SoC Texas Instruments TAS2552 Mono Audio Amplifier + * + * Copyright (C) 2014 Texas Instruments Inc. + * + * Author: Dan Murphy dmurphy@ti.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/tas2552-plat.h> + +#include "tas2552.h" + +static struct reg_default tas2552_reg_defs[] = { + {TAS2552_CFG_1, 0x16}, + {TAS2552_CFG_3, 0x5E}, + {TAS2552_DOUT, 0x00}, + {TAS2552_OUTPUT_DATA, 0xC8}, + {TAS2552_PDM_CFG, 0x02}, + {TAS2552_PGA_GAIN, 0x10}, + {TAS2552_BOOST_PT_CTRL, 0x0F}, + {TAS2552_LIMIT_LVL_CTRL, 0x0C}, + {TAS2552_LIMIT_RATE_HYS, 0x20}, + {TAS2552_CFG_2, 0xEA}, + {TAS2552_SER_CTRL_1, 0x00}, + {TAS2552_SER_CTRL_2, 0x00}, + {TAS2552_PLL_CTRL_1, 0x10}, + {TAS2552_PLL_CTRL_2, 0x00}, + {TAS2552_PLL_CTRL_3, 0x00}, + {TAS2552_BTIP, 0x8f}, + {TAS2552_BTS_CTRL, 0x80}, + {TAS2552_LIMIT_RELEASE, 0x05}, + {TAS2552_LIMIT_INT_COUNT, 0x00}, + {TAS2552_EDGE_RATE_CTRL, 0x40}, + {TAS2552_VBAT_DATA, 0x00}, +}; + +struct tas2552_data { + struct mutex mutex; + struct snd_soc_codec *codec; + struct regmap *regmap; + struct i2c_client *tas2552_client; + unsigned char regs[TAS2552_VBAT_DATA]; + int power_gpio; + u8 power_state:1; +}; + +static int tas2552_power(struct tas2552_data *data, u8 power) +{ + int ret = 0; + + BUG_ON(data->tas2552_client == NULL); + + mutex_lock(&data->mutex); + if (power == data->power_state) + goto exit; + + if (power) { + if (data->power_gpio >= 0) + gpio_set_value(data->power_gpio, 1); + + data->power_state = 1; + } else { + if (data->power_gpio >= 0) + gpio_set_value(data->power_gpio, 0); + + data->power_state = 0; + } + +exit: + mutex_unlock(&data->mutex); + return ret; +} + +static void tas2552_sw_shutdown(struct tas2552_data *tas_data, int sw_shutdown) +{ + u8 cfg1_reg; + + if (sw_shutdown) + cfg1_reg |= (sw_shutdown << 1); + else + cfg1_reg &= ~TAS2552_SWS_MASK; + + snd_soc_update_bits(tas_data->codec, TAS2552_CFG_1, + TAS2552_SWS_MASK, cfg1_reg); +} + +static void tas2552_init(struct snd_soc_codec *codec) +{ + snd_soc_write(codec, TAS2552_CFG_1, 0x16); + snd_soc_write(codec, TAS2552_CFG_3, 0x5E); + snd_soc_write(codec, TAS2552_DOUT, 0x00); + snd_soc_write(codec, TAS2552_OUTPUT_DATA, 0xC8); + snd_soc_write(codec, TAS2552_PDM_CFG, 0x02); + snd_soc_write(codec, TAS2552_PGA_GAIN, 0x10); + snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, 0x0F); + snd_soc_write(codec, TAS2552_LIMIT_LVL_CTRL, 0x0C); + snd_soc_write(codec, TAS2552_LIMIT_RATE_HYS, 0x20); + snd_soc_write(codec, TAS2552_CFG_2, 0xEA); +} + +static int tas2552_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + u8 wclk_reg; + struct snd_soc_codec *codec = dai->codec; + + /* Setting DAC clock dividers based on substream sample rate. */ + switch (params_rate(params)) { + case 8000: + wclk_reg = TAS2552_8KHZ; + break; + case 11025: + wclk_reg = TAS2552_11_12KHZ; + break; + case 16000: + wclk_reg = TAS2552_16KHZ; + break; + case 32000: + wclk_reg = TAS2552_32KHZ; + break; + case 22050: + case 24000: + wclk_reg = TAS2552_22_24KHZ; + break; + case 44100: + case 48000: + wclk_reg = TAS2552_44_48KHZ; + break; + case 96000: + wclk_reg = TAS2552_88_96KHZ; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, TAS2552_CFG_3, TAS2552_WCLK_MASK, wclk_reg); + + return 0; +} + +static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + u8 serial_format; + struct snd_soc_codec *codec = dai->codec; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + serial_format = 0x00; + break; + case SND_SOC_DAIFMT_CBS_CFM: + serial_format = TAS2552_WORD_CLK_MASK; + break; + case SND_SOC_DAIFMT_CBM_CFS: + serial_format = TAS2552_BIT_CLK_MASK; + break; + case SND_SOC_DAIFMT_CBM_CFM: + serial_format = (TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK); + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, TAS2552_SER_CTRL_1, + (TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK), + serial_format); + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + serial_format = 0x0; + break; + case SND_SOC_DAIFMT_DSP_A: + serial_format = TAS2552_DAIFMT_DSP; + break; + case SND_SOC_DAIFMT_RIGHT_J: + serial_format = TAS2552_DAIFMT_RIGHT_J; + break; + case SND_SOC_DAIFMT_LEFT_J: + serial_format = TAS2552_DAIFMT_LEFT_J; + break; + + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, TAS2552_SER_CTRL_1, TAS2552_DATA_FORMAT_MASK, + serial_format); + + return 0; +} + +static int tas2552_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct tas2552_data *data = dev_get_drvdata(dai->dev); + + /* Fill in the PLL control registers for J & D + * PLL_CLK = (.5 * freq * J.D) / 2^p + * Need to fill in J and D here based on incoming freq + */ + + tas2552_sw_shutdown(data, 1); + + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_PLL_ENABLE, 0); + + snd_soc_write(codec, TAS2552_PLL_CTRL_1, 0x10); + snd_soc_write(codec, TAS2552_PLL_CTRL_2, 0x00); + snd_soc_write(codec, TAS2552_PLL_CTRL_3, 0x00); + + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_PLL_ENABLE, + TAS2552_PLL_ENABLE); + + tas2552_sw_shutdown(data, 0); + + return 0; +} + +static int tas2552_mute(struct snd_soc_dai *dai, int mute) +{ + u8 cfg1_reg; + struct snd_soc_codec *codec = dai->codec; + + if (mute) + cfg1_reg |= TAS2552_MUTE_MASK; + else + cfg1_reg &= ~TAS2552_MUTE_MASK; + + snd_soc_update_bits(codec, TAS2552_CFG_1, TAS2552_MUTE_MASK, cfg1_reg); + + return 0; +} + +static int tas2552_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + + tas2552_sw_shutdown(tas2552, 1); + tas2552_power(tas2552, 1); + + /* Turn on Class D amplifier */ + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_CLASSD_EN_MASK, + TAS2552_CLASSD_EN); + + tas2552_sw_shutdown(tas2552, 0); + + return 0; +} + +static void tas2552_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + + tas2552_sw_shutdown(tas2552, 1); + tas2552_power(tas2552, 0); +} + +static struct snd_soc_dai_ops tas2552_speaker_dai_ops = { + .hw_params = tas2552_hw_params, + .set_sysclk = tas2552_set_dai_sysclk, + .set_fmt = tas2552_set_dai_fmt, + .startup = tas2552_startup, + .shutdown = tas2552_shutdown, + .digital_mute = tas2552_mute, +}; + +/* Formats supported by TAS2552 driver. */ +#define TAS2552_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +/* TAS2552 dai structure. */ +static struct snd_soc_dai_driver tas2552_dai[] = { + { + .name = "tas2552-amplifier", + .playback = { + .stream_name = "Speaker", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = TAS2552_FORMATS, + }, + .ops = &tas2552_speaker_dai_ops, + }, +}; + +/* + * DAC digital volumes. From -7 to 24 dB in 1 dB steps + */ +static DECLARE_TLV_DB_SCALE(dac_tlv, -7, 100, 24); + +static const struct snd_kcontrol_new tas2552_snd_controls[] = { + SOC_SINGLE_TLV("Speaker Driver Playback Volume", + TAS2552_PGA_GAIN, 0, 0x1f, 1, dac_tlv), +}; + +static int tas2552_codec_probe(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + + tas2552->codec = codec; + tas2552_power(tas2552, 1); + tas2552_init(codec); + + return 0; +} + +static int tas2552_codec_remove(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + + tas2552_power(tas2552, 0); + + return 0; +}; + +static struct snd_soc_codec_driver soc_codec_dev_tas2552 = { + .probe = tas2552_codec_probe, + .remove = tas2552_codec_remove, + .controls = tas2552_snd_controls, + .num_controls = ARRAY_SIZE(tas2552_snd_controls), +}; + +static const struct regmap_config tas2552_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = TAS2552_MAX_REG, + .reg_defaults = tas2552_reg_defs, + .num_reg_defaults = ARRAY_SIZE(tas2552_reg_defs), + .cache_type = REGCACHE_RBTREE, +}; + +static int tas2552_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev; + struct tas2552_data *data; + struct tas2552_platform_data *pdata = client->dev.platform_data; + struct device_node *np = client->dev.of_node; + int ret; + + dev = &client->dev; + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + if (pdata) { + data->power_gpio = pdata->power_gpio; + } else if (np) { + data->power_gpio = of_get_named_gpio(np, "enable-gpio", 0); + } else { + dev_err(dev, "Platform data not set\n"); + return -ENODEV; + } + + data->regmap = devm_regmap_init_i2c(client, &tas2552_regmap_config); + if (IS_ERR(data->regmap)) { + ret = PTR_ERR(data->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + data->tas2552_client = client; + data->regmap = devm_regmap_init_i2c(client, &tas2552_regmap_config); + if (IS_ERR(data->regmap)) { + ret = PTR_ERR(data->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + dev_set_drvdata(&client->dev, data); + + mutex_init(&data->mutex); + + if (data->power_gpio >= 0) { + ret = devm_gpio_request(dev, data->power_gpio, "tas2552 enable"); + if (ret < 0) { + dev_err(dev, "Failed to request power GPIO (%d)\n", + data->power_gpio); + goto err_gpio; + } + gpio_direction_output(data->power_gpio, 0); + } + + ret = snd_soc_register_codec(&client->dev, + &soc_codec_dev_tas2552, + tas2552_dai, ARRAY_SIZE(tas2552_dai)); + if (ret < 0) + dev_err(&client->dev, "Failed to register codec: %d\n", ret); + + return 0; + +err_gpio: + data->tas2552_client = NULL; + return ret; +} + +static int tas2552_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static const struct i2c_device_id tas2552_id[] = { + { "tas2552-codec", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas2552_id); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tas2552_of_match[] = { + { .compatible = "ti,tas2552", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tas2552_of_match); +#endif + +static struct i2c_driver tas2552_i2c_driver = { + .driver = { + .name = "tas2552-codec", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tas2552_of_match), + }, + .probe = tas2552_probe, + .remove = tas2552_i2c_remove, + .id_table = tas2552_id, +}; + +module_i2c_driver(tas2552_i2c_driver); + +MODULE_AUTHOR("Dan Muprhy dmurphy@ti.com"); +MODULE_DESCRIPTION("TAS2552 Audio amplifier driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2552.h b/sound/soc/codecs/tas2552.h new file mode 100644 index 0000000..174c64d --- /dev/null +++ b/sound/soc/codecs/tas2552.h @@ -0,0 +1,75 @@ +/* + * ALSA SoC Texas Instruments TAS2552 Mono Audio Amplifier + * + * Copyright (C) 2014 Texas Instruments Inc. + * + * Author: Dan Murphy dmurphy@ti.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef __TAS2552_H__ +#define __TAS2552_H__ + +/* Register Address Map */ +#define TAS2552_DEVICE_STATUS 0x00 +#define TAS2552_CFG_1 0x01 +#define TAS2552_CFG_2 0x02 +#define TAS2552_CFG_3 0x03 +#define TAS2552_DOUT 0x04 +#define TAS2552_SER_CTRL_1 0x05 +#define TAS2552_SER_CTRL_2 0x06 +#define TAS2552_OUTPUT_DATA 0x07 +#define TAS2552_PLL_CTRL_1 0x08 +#define TAS2552_PLL_CTRL_2 0x09 +#define TAS2552_PLL_CTRL_3 0x0a +#define TAS2552_BTIP 0x0b +#define TAS2552_BTS_CTRL 0x0c +#define TAS2552_LIMIT_LVL_CTRL 0x0d +#define TAS2552_LIMIT_RATE_HYS 0x0e +#define TAS2552_LIMIT_RELEASE 0x0f +#define TAS2552_LIMIT_INT_COUNT 0x10 +#define TAS2552_PDM_CFG 0x11 +#define TAS2552_PGA_GAIN 0x12 +#define TAS2552_EDGE_RATE_CTRL 0x13 +#define TAS2552_BOOST_PT_CTRL 0x14 +#define TAS2552_VER_NUM 0x16 +#define TAS2552_VBAT_DATA 0x19 +#define TAS2552_MAX_REG 0x20 + +/* CFG1 Register Masks */ +#define TAS2552_MUTE_MASK (1 << 2) +#define TAS2552_SWS_MASK (1 << 1) +#define TAS2552_WCLK_MASK 0x07 +#define TAS2552_CLASSD_EN_MASK (1 << 7) +#define TAS2552_CLASSD_EN 0x80 + +#define TAS2552_PLL_ENABLE (1 << 3) + +/* CFG3 Register Masks */ +#define TAS2552_WORD_CLK_MASK 0x80 +#define TAS2552_BIT_CLK_MASK 0x40 +#define TAS2552_DATA_FORMAT_MASK 0x0c + +#define TAS2552_DAIFMT_DSP 0x04 +#define TAS2552_DAIFMT_RIGHT_J 0x08 +#define TAS2552_DAIFMT_LEFT_J 0x0c + +/* WCLK Dividers */ +#define TAS2552_8KHZ 0x00 +#define TAS2552_11_12KHZ 0x01 +#define TAS2552_16KHZ 0x02 +#define TAS2552_22_24KHZ 0x03 +#define TAS2552_32KHZ 0x04 +#define TAS2552_44_48KHZ 0x05 +#define TAS2552_88_96KHZ 0x06 +#define TAS2552_176_192KHZ 0x07 + +#endif
Hi,
On Mon, Jun 30, 2014 at 06:10:59PM +0100, Dan Murphy wrote:
Support the TI TAS2552 Class D amplifier.
The TAS2552 is a high efficiency Class-D audio power amplifier with advanced battery current management and an integrated Class-G boost The device constantly measures the current and voltage across the load and provides a digital stream of this information.
Signed-off-by: Dan Murphy dmurphy@ti.com
v2 - Address RFC comments- Added regmap, and snd_soc calls removed debug code, address checkpatch errors -https://patchwork.kernel.org/patch/4378281/
.../devicetree/bindings/sound/tas2552.txt | 22 + include/sound/tas2552-plat.h | 25 ++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2552.c | 462 ++++++++++++++++++++ sound/soc/codecs/tas2552.h | 75 ++++ 6 files changed, 591 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2552.txt create mode 100644 include/sound/tas2552-plat.h create mode 100644 sound/soc/codecs/tas2552.c create mode 100644 sound/soc/codecs/tas2552.h
diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt new file mode 100644 index 0000000..58e931b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2552.txt @@ -0,0 +1,22 @@ +Texas Instruments - tas2552 Codec module
+The tas2552 serial control bus communicates through I2C protocols
+Required properties:
+- compatible - "string" - One of:
- "ti,tas2552" - TAS2552
Drop the "string". The compatible list is a standard property and its type (string list) is well-known.
You could change "One of:" to "should contain:", which will look less weird with a single entry.
+- reg - <int> - I2C slave address
Similarly to "string" we can get rid of <int> here. i2c addresses are well-known to be described in a single u32 cell.
+Optional properties:
+- power-gpio - gpio pin to enable/disable the device
The code below seems to look for "enable-gpio". Searching for "power-gpio" only hits in the line above and the example below. I assume the code is in error?
+Example:
+tas2552: tas2552@41 {
compatible = "ti,tas2552";reg = <0x41>;power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;+};
[...]
if (pdata) {data->power_gpio = pdata->power_gpio;} else if (np) {data->power_gpio = of_get_named_gpio(np, "enable-gpio", 0);
Usually I see this logic the other way around, looking for DT data first then falling back to platform data if no DT information was present.
Cheers, Mark.
Hi
On 06/30/2014 12:21 PM, Mark Rutland wrote:
Hi,
On Mon, Jun 30, 2014 at 06:10:59PM +0100, Dan Murphy wrote:
Support the TI TAS2552 Class D amplifier.
The TAS2552 is a high efficiency Class-D audio power amplifier with advanced battery current management and an integrated Class-G boost The device constantly measures the current and voltage across the load and provides a digital stream of this information.
Signed-off-by: Dan Murphy dmurphy@ti.com
v2 - Address RFC comments- Added regmap, and snd_soc calls removed debug code, address checkpatch errors -https://patchwork.kernel.org/patch/4378281/
.../devicetree/bindings/sound/tas2552.txt | 22 + include/sound/tas2552-plat.h | 25 ++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2552.c | 462 ++++++++++++++++++++ sound/soc/codecs/tas2552.h | 75 ++++ 6 files changed, 591 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2552.txt create mode 100644 include/sound/tas2552-plat.h create mode 100644 sound/soc/codecs/tas2552.c create mode 100644 sound/soc/codecs/tas2552.h
diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt new file mode 100644 index 0000000..58e931b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2552.txt @@ -0,0 +1,22 @@ +Texas Instruments - tas2552 Codec module
+The tas2552 serial control bus communicates through I2C protocols
+Required properties:
+- compatible - "string" - One of:
- "ti,tas2552" - TAS2552
Drop the "string". The compatible list is a standard property and its type (string list) is well-known.
You could change "One of:" to "should contain:", which will look less weird with a single entry.
+- reg - <int> - I2C slave address
Similarly to "string" we can get rid of <int> here. i2c addresses are well-known to be described in a single u32 cell.
+Optional properties:
+- power-gpio - gpio pin to enable/disable the device
The code below seems to look for "enable-gpio". Searching for "power-gpio" only hits in the line above and the example below. I assume the code is in error?
No this was PEBKAC I did not update the documentation when I wrote the code.
+Example:
+tas2552: tas2552@41 {
compatible = "ti,tas2552";reg = <0x41>;power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;+};
[...]
if (pdata) {data->power_gpio = pdata->power_gpio;} else if (np) {data->power_gpio = of_get_named_gpio(np, "enable-gpio", 0);Usually I see this logic the other way around, looking for DT data first then falling back to platform data if no DT information was present.
Cheers, Mark.
Thanks for the review. I will take these changes into v3 after a good code review soak time.
Dan
On Mon, Jun 30, 2014 at 06:21:15PM +0100, Mark Rutland wrote:
On Mon, Jun 30, 2014 at 06:10:59PM +0100, Dan Murphy wrote:
+Optional properties:
+- power-gpio - gpio pin to enable/disable the device
The code below seems to look for "enable-gpio". Searching for "power-gpio" only hits in the line above and the example below. I assume the code is in error?
It depends what this is for - if it's for an external regulator it should be a regulator binding. Also all GPIO properties are supposed to be called -gpios because DT conventions.
On Mon, Jun 30, 2014 at 10:43:42PM +0100, Mark Brown wrote:
On Mon, Jun 30, 2014 at 06:21:15PM +0100, Mark Rutland wrote:
On Mon, Jun 30, 2014 at 06:10:59PM +0100, Dan Murphy wrote:
+Optional properties:
+- power-gpio - gpio pin to enable/disable the device
The code below seems to look for "enable-gpio". Searching for "power-gpio" only hits in the line above and the example below. I assume the code is in error?
It depends what this is for - if it's for an external regulator it should be a regulator binding. Also all GPIO properties are supposed to be called -gpios because DT conventions.
Sure. I was commenting on the mismatch between "enable" in the code and "power" in the documentation rather than the appropriateness of either "power-gpios" or "enable-gpios".
Mark.
participants (3)
-
Dan Murphy -
Mark Brown -
Mark Rutland