[alsa-devel] [PATCH v2 1/4] ASoC: samsung: Remove unneeded initialization of chan_name
This patch updates the I2S drivers to always use chan_names[] field of struct snd_dmaengine_pcm_config for specifying DMA channel names, rather than using struct snd_dmaengine_dai_dma_data.
This allows us to subsequently drop the SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME flag, now when the last use of that flag is removed.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com --- Changes since v1: - the framework user changes moved to a separate (this) patch.
sound/soc/samsung/dmaengine.c | 8 ++------ sound/soc/samsung/i2s.c | 3 --- sound/soc/samsung/s3c2412-i2s.c | 2 -- sound/soc/samsung/s3c24xx-i2s.c | 2 -- 4 files changed, 2 insertions(+), 13 deletions(-)
diff --git a/sound/soc/samsung/dmaengine.c b/sound/soc/samsung/dmaengine.c index 9104c98..cda656e 100644 --- a/sound/soc/samsung/dmaengine.c +++ b/sound/soc/samsung/dmaengine.c @@ -37,12 +37,8 @@ int samsung_asoc_dma_platform_register(struct device *dev, dma_filter_fn filter, pcm_conf->prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config; pcm_conf->compat_filter_fn = filter;
- if (dev->of_node) { - pcm_conf->chan_names[SNDRV_PCM_STREAM_PLAYBACK] = tx; - pcm_conf->chan_names[SNDRV_PCM_STREAM_CAPTURE] = rx; - } else { - flags |= SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME; - } + pcm_conf->chan_names[SNDRV_PCM_STREAM_PLAYBACK] = tx; + pcm_conf->chan_names[SNDRV_PCM_STREAM_CAPTURE] = rx;
return devm_snd_dmaengine_pcm_register(dev, pcm_conf, flags); } diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 588aa01..e06aa31 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1305,8 +1305,6 @@ static int samsung_i2s_probe(struct platform_device *pdev) } pri_dai->dma_playback.addr = regs_base + I2STXD; pri_dai->dma_capture.addr = regs_base + I2SRXD; - pri_dai->dma_playback.chan_name = "tx"; - pri_dai->dma_capture.chan_name = "rx"; pri_dai->dma_playback.addr_width = 4; pri_dai->dma_capture.addr_width = 4; pri_dai->quirks = quirks; @@ -1326,7 +1324,6 @@ static int samsung_i2s_probe(struct platform_device *pdev) sec_dai->lock = &pri_dai->spinlock; sec_dai->variant_regs = pri_dai->variant_regs; sec_dai->dma_playback.addr = regs_base + I2STXDS; - sec_dai->dma_playback.chan_name = "tx-sec";
if (!np) { sec_dai->dma_playback.filter_data = i2s_pdata->dma_play_sec; diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c index 3e89fbc..40331a0 100644 --- a/sound/soc/samsung/s3c2412-i2s.c +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -35,12 +35,10 @@ #include <linux/platform_data/asoc-s3c.h>
static struct snd_dmaengine_dai_dma_data s3c2412_i2s_pcm_stereo_out = { - .chan_name = "tx", .addr_width = 4, };
static struct snd_dmaengine_dai_dma_data s3c2412_i2s_pcm_stereo_in = { - .chan_name = "rx", .addr_width = 4, };
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index c78a936..d59a47d 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -33,12 +33,10 @@ #include <linux/platform_data/asoc-s3c.h>
static struct snd_dmaengine_dai_dma_data s3c24xx_i2s_pcm_stereo_out = { - .chan_name = "tx", .addr_width = 2, };
static struct snd_dmaengine_dai_dma_data s3c24xx_i2s_pcm_stereo_in = { - .chan_name = "rx", .addr_width = 2, };
-- 1.9.1
Since commit 194c7dea00c68c1b1f8ff26304fa937a006f66dd "ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config" custom DMA channels can be also specified in chan_names[] field of struct snd_dmaengine_pcm_config. This patch removes chan_name field of struct snd_dmaengine_dai_dma_data as it is now unused.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com --- Changes since v1: - the framework code changes put in a separate (this) patch.
include/sound/dmaengine_pcm.h | 6 ------ sound/soc/soc-generic-dmaengine-pcm.c | 13 +------------ 2 files changed, 1 insertion(+), 18 deletions(-)
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h index 67be244..1c8f9e1 100644 --- a/include/sound/dmaengine_pcm.h +++ b/include/sound/dmaengine_pcm.h @@ -71,7 +71,6 @@ struct dma_chan *snd_dmaengine_pcm_request_channel(dma_filter_fn filter_fn, * @slave_id: Slave requester id for the DMA channel. * @filter_data: Custom DMA channel filter data, this will usually be used when * requesting the DMA channel. - * @chan_name: Custom channel name to use when requesting DMA channel. * @fifo_size: FIFO size of the DAI controller in bytes * @flags: PCM_DAI flags, only SND_DMAENGINE_PCM_DAI_FLAG_PACK for now */ @@ -81,7 +80,6 @@ struct snd_dmaengine_dai_dma_data { u32 maxburst; unsigned int slave_id; void *filter_data; - const char *chan_name; unsigned int fifo_size; unsigned int flags; }; @@ -107,10 +105,6 @@ void snd_dmaengine_pcm_set_config_from_dai_data( * playback. */ #define SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX BIT(3) -/* - * The PCM streams have custom channel names specified. - */ -#define SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME BIT(4)
/** * struct snd_dmaengine_pcm_config - Configuration data for dmaengine based PCM diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 6cef397..17eb149 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -263,7 +263,6 @@ static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd) struct dmaengine_pcm *pcm = soc_platform_to_pcm(rtd->platform); const struct snd_dmaengine_pcm_config *config = pcm->config; struct device *dev = rtd->platform->dev; - struct snd_dmaengine_dai_dma_data *dma_data; struct snd_pcm_substream *substream; size_t prealloc_buffer_size; size_t max_buffer_size; @@ -278,19 +277,11 @@ static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd) max_buffer_size = SIZE_MAX; }
- for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE; i++) { substream = rtd->pcm->streams[i].substream; if (!substream) continue;
- dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - - if (!pcm->chan[i] && - (pcm->flags & SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME)) - pcm->chan[i] = dma_request_slave_channel(dev, - dma_data->chan_name); - if (!pcm->chan[i] && (pcm->flags & SND_DMAENGINE_PCM_FLAG_COMPAT)) { pcm->chan[i] = dmaengine_pcm_compat_request_channel(rtd, substream); @@ -359,9 +350,7 @@ static int dmaengine_pcm_request_chan_of(struct dmaengine_pcm *pcm, const char *name; struct dma_chan *chan;
- if ((pcm->flags & (SND_DMAENGINE_PCM_FLAG_NO_DT | - SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME)) || - !dev->of_node) + if ((pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_DT) || !dev->of_node) return 0;
if (config && config->dma_dev) { -- 1.9.1
On 10/25/2016 05:08 PM, Sylwester Nawrocki wrote:
Since commit 194c7dea00c68c1b1f8ff26304fa937a006f66dd "ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config" custom DMA channels can be also specified in chan_names[] field of struct snd_dmaengine_pcm_config. This patch removes chan_name field of struct snd_dmaengine_dai_dma_data as it is now unused.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com
Acked-by: Lars-Peter Clausen lars@metafoo.de
Thanks.
On 10/25/2016 05:08 PM, Sylwester Nawrocki wrote:
Since commit 194c7dea00c68c1b1f8ff26304fa937a006f66dd "ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config" custom DMA channels can be also specified in chan_names[] field of struct snd_dmaengine_pcm_config. This patch removes chan_name field of struct snd_dmaengine_dai_dma_data as it is now unused.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com
I'm afraid this patch needs to be reverted :/ I didn't notice earlier the Samsung AC97 controller has 3 substreams per a platform device and this cannot be handled with struct snd_dmaengine_pcm_config, which allows to specify up to 2 DMA channel names.
The AC97 driver (sound/soc/samsung/ac97.c) seems to have been broken for a long time as it currently doesn't have the channel names specified at all [1]. It seems in order to fix it the best would be to restore the feature the $subject patch removes.
[1] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/sound/so...
include/sound/dmaengine_pcm.h | 6 ------ sound/soc/soc-generic-dmaengine-pcm.c | 13 +------------ 2 files changed, 1 insertion(+), 18 deletions(-)
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h index 67be244..1c8f9e1 100644 --- a/include/sound/dmaengine_pcm.h +++ b/include/sound/dmaengine_pcm.h @@ -71,7 +71,6 @@ struct dma_chan *snd_dmaengine_pcm_request_channel(dma_filter_fn filter_fn,
- @slave_id: Slave requester id for the DMA channel.
- @filter_data: Custom DMA channel filter data, this will usually be used when
- requesting the DMA channel.
*/
- @chan_name: Custom channel name to use when requesting DMA channel.
- @fifo_size: FIFO size of the DAI controller in bytes
- @flags: PCM_DAI flags, only SND_DMAENGINE_PCM_DAI_FLAG_PACK for now
@@ -81,7 +80,6 @@ struct snd_dmaengine_dai_dma_data { u32 maxburst; unsigned int slave_id; void *filter_data;
- const char *chan_name; unsigned int fifo_size; unsigned int flags;
}; @@ -107,10 +105,6 @@ void snd_dmaengine_pcm_set_config_from_dai_data(
- playback.
*/ #define SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX BIT(3) -/*
- The PCM streams have custom channel names specified.
- */
-#define SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME BIT(4)
/**
- struct snd_dmaengine_pcm_config - Configuration data for dmaengine based PCM
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 6cef397..17eb149 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -263,7 +263,6 @@ static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd) struct dmaengine_pcm *pcm = soc_platform_to_pcm(rtd->platform); const struct snd_dmaengine_pcm_config *config = pcm->config; struct device *dev = rtd->platform->dev;
- struct snd_dmaengine_dai_dma_data *dma_data; struct snd_pcm_substream *substream; size_t prealloc_buffer_size; size_t max_buffer_size;
@@ -278,19 +277,11 @@ static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd) max_buffer_size = SIZE_MAX; }
for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE; i++) { substream = rtd->pcm->streams[i].substream; if (!substream) continue;
dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);if (!pcm->chan[i] &&(pcm->flags & SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME))pcm->chan[i] = dma_request_slave_channel(dev,dma_data->chan_name);if (!pcm->chan[i] && (pcm->flags & SND_DMAENGINE_PCM_FLAG_COMPAT)) { pcm->chan[i] = dmaengine_pcm_compat_request_channel(rtd, substream);
@@ -359,9 +350,7 @@ static int dmaengine_pcm_request_chan_of(struct dmaengine_pcm *pcm, const char *name; struct dma_chan *chan;
- if ((pcm->flags & (SND_DMAENGINE_PCM_FLAG_NO_DT |
SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME)) ||!dev->of_node)
- if ((pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_DT) || !dev->of_node) return 0;
I somehow messed up testing this patch series on a non-DT platform and missed the fact that standard "tx", "rx" DMA channel names will only be used for DT cases in the ASoC core.
Perhaps it makes sense to change the above test to something like:
if (((pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_DT) || (!dev->of_node && (pcm->flags & SND_DMAENGINE_PCM_FLAG_COMPAT)))) return 0;
so when a platform gets converted to use the DMA slave map it can be treated similarly to a DT platform when SND_DMAENGINE_PCM_FLAG_COMPAT flag is not set.
I'd either need a change as above or to also revert patch 1/4 :/
if (config && config->dma_dev) {
1.9.1
-- Thanks, Sylwester
On Thu, Oct 27, 2016 at 01:21:21PM +0200, Sylwester Nawrocki wrote:
On 10/25/2016 05:08 PM, Sylwester Nawrocki wrote:
Since commit 194c7dea00c68c1b1f8ff26304fa937a006f66dd "ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config" custom DMA channels can be also specified in chan_names[] field of struct snd_dmaengine_pcm_config. This patch removes chan_name field of struct snd_dmaengine_dai_dma_data as it is now unused.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com
I'm afraid this patch needs to be reverted :/ I didn't notice earlier the Samsung AC97 controller has 3 substreams per a platform device and this cannot be handled with struct snd_dmaengine_pcm_config, which allows to specify up to 2 DMA channel names.
Can you send a revert patch with an explanation though...
The AC97 driver (sound/soc/samsung/ac97.c) seems to have been broken for a long time as it currently doesn't have the channel names specified at all [1]. It seems in order to fix it the best would be to restore the feature the $subject patch removes.
...if the driver just doesn't work and hasn't worked for a long time perhaps it's better to just drop the driver?
On 10/27/2016 04:23 PM, Mark Brown wrote:
On Thu, Oct 27, 2016 at 01:21:21PM +0200, Sylwester Nawrocki wrote:
On 10/25/2016 05:08 PM, Sylwester Nawrocki wrote:
Since commit 194c7dea00c68c1b1f8ff26304fa937a006f66dd "ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config" custom DMA channels can be also specified in chan_names[] field of struct snd_dmaengine_pcm_config. This patch removes chan_name field of struct snd_dmaengine_dai_dma_data as it is now unused.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com
I'm afraid this patch needs to be reverted :/ I didn't notice earlier the Samsung AC97 controller has 3 substreams per a platform device and this cannot be handled with struct snd_dmaengine_pcm_config, which allows to specify up to 2 DMA channel names.
Can you send a revert patch with an explanation though...
Sure, I'll prepare the patch.
The AC97 driver (sound/soc/samsung/ac97.c) seems to have been broken for a long time as it currently doesn't have the channel names specified at all [1]. It seems in order to fix it the best would be to restore the feature the $subject patch removes.
...if the driver just doesn't work and hasn't worked for a long time perhaps it's better to just drop the driver?
I'm not opposed to that, the feature certainly hasn't been used for a long time with mainline kernels. Then I think these drivers could be dropped as well:
sound/soc/samsung/ln2440sbc_alc650.c sound/soc/samsung/smdk2443_wm9710.c sound/soc/samsung/smdk_wm9713.c
That all could be added again with support for new frameworks if there are requests to support the feature. I'm going to post patches removing those drivers.
Still I'd like to revert $subject patch to be able to handle more than 2 substreams per DMA device. I planned to get rid of an additional platform device creation in sound/soc/samsung/i2s.c, which IIUC introduces now unnecessary complication, could be avoided and doesn't match the hardware very well. Not quite sure it that would be the right direction but I think being able to specify custom DMA channel names per DAI DMA data could be helpful in doing that. I.e. to have 1 PCM with 3 substreams {"tx", "rx", "tx-sec"} instead of 2 PCMs with substreams {"tx", "rx"} and {"tx-sec"}.
-- Thanks, Sylwester
Since the s3c24xx-dma is converted to use DMA map we can rely on the DMA subsystem to match DMA channels and slave devices, rather than passing DMA details from platform_data.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com --- Changes since v1: - none.
sound/soc/samsung/s3c24xx-i2s.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index d59a47d..29196a9 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -30,8 +30,6 @@ #include "dma.h" #include "s3c24xx-i2s.h"
-#include <linux/platform_data/asoc-s3c.h> - static struct snd_dmaengine_dai_dma_data s3c24xx_i2s_pcm_stereo_out = { .addr_width = 2, }; @@ -449,14 +447,8 @@ static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai)
static int s3c24xx_iis_dev_probe(struct platform_device *pdev) { - int ret = 0; struct resource *res; - struct s3c_audio_pdata *pdata = dev_get_platdata(&pdev->dev); - - if (!pdata) { - dev_err(&pdev->dev, "missing platform data"); - return -ENXIO; - } + int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -468,9 +460,7 @@ static int s3c24xx_iis_dev_probe(struct platform_device *pdev) return PTR_ERR(s3c24xx_i2s.regs);
s3c24xx_i2s_pcm_stereo_out.addr = res->start + S3C2410_IISFIFO; - s3c24xx_i2s_pcm_stereo_out.filter_data = pdata->dma_playback; s3c24xx_i2s_pcm_stereo_in.addr = res->start + S3C2410_IISFIFO; - s3c24xx_i2s_pcm_stereo_in.filter_data = pdata->dma_capture;
ret = devm_snd_soc_register_component(&pdev->dev, &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1); @@ -479,8 +469,7 @@ static int s3c24xx_iis_dev_probe(struct platform_device *pdev) return ret; }
- ret = samsung_asoc_dma_platform_register(&pdev->dev, - pdata->dma_filter, + ret = samsung_asoc_dma_platform_register(&pdev->dev, NULL, NULL, NULL); if (ret) pr_err("failed to register the dma: %d\n", ret); -- 1.9.1
pr_err() are replaced with dev_err() so information about device the error logs refer to is also included.
pr_debug() at beginning of each function are removed as they are likely very rarely used and can always be added again when doing any serious debugging.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com --- Changes since v1: - none.
sound/soc/samsung/s3c24xx-i2s.c | 30 ++++-------------------------- 1 file changed, 4 insertions(+), 26 deletions(-)
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index 29196a9..7c7061b 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -54,8 +54,6 @@ static void s3c24xx_snd_txctrl(int on) u32 iiscon; u32 iismod;
- pr_debug("Entered %s\n", __func__); - iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); @@ -99,8 +97,6 @@ static void s3c24xx_snd_rxctrl(int on) u32 iiscon; u32 iismod;
- pr_debug("Entered %s\n", __func__); - iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); @@ -147,8 +143,6 @@ static int s3c24xx_snd_lrsync(void) u32 iiscon; int timeout = 50; /* 5ms */
- pr_debug("Entered %s\n", __func__); - while (1) { iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); if (iiscon & S3C2410_IISCON_LRINDEX) @@ -167,8 +161,6 @@ static int s3c24xx_snd_lrsync(void) */ static inline int s3c24xx_snd_is_clkmaster(void) { - pr_debug("Entered %s\n", __func__); - return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1; }
@@ -180,8 +172,6 @@ static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai, { u32 iismod;
- pr_debug("Entered %s\n", __func__); - iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); pr_debug("hw_params r: IISMOD: %x \n", iismod);
@@ -209,6 +199,7 @@ static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); pr_debug("hw_params w: IISMOD: %x \n", iismod); + return 0; }
@@ -219,8 +210,6 @@ static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream, struct snd_dmaengine_dai_dma_data *dma_data; u32 iismod;
- pr_debug("Entered %s\n", __func__); - dma_data = snd_soc_dai_get_dma_data(dai, substream);
/* Working copies of register */ @@ -242,6 +231,7 @@ static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); pr_debug("hw_params w: IISMOD: %x\n", iismod); + return 0; }
@@ -250,8 +240,6 @@ static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd, { int ret = 0;
- pr_debug("Entered %s\n", __func__); - switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: @@ -293,8 +281,6 @@ static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, { u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
- pr_debug("Entered %s\n", __func__); - iismod &= ~S3C2440_IISMOD_MPLL;
switch (clk_id) { @@ -319,8 +305,6 @@ static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, { u32 reg;
- pr_debug("Entered %s\n", __func__); - switch (div_id) { case S3C24XX_DIV_BCLK: reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK; @@ -354,8 +338,6 @@ u32 s3c24xx_i2s_get_clockrate(void)
static int s3c24xx_i2s_probe(struct snd_soc_dai *dai) { - pr_debug("Entered %s\n", __func__); - snd_soc_dai_init_dma_data(dai, &s3c24xx_i2s_pcm_stereo_out, &s3c24xx_i2s_pcm_stereo_in);
@@ -381,8 +363,6 @@ static int s3c24xx_i2s_probe(struct snd_soc_dai *dai) #ifdef CONFIG_PM static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai) { - pr_debug("Entered %s\n", __func__); - s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); @@ -395,7 +375,6 @@ static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai)
static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai) { - pr_debug("Entered %s\n", __func__); clk_prepare_enable(s3c24xx_i2s.iis_clk);
writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); @@ -410,7 +389,6 @@ static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai) #define s3c24xx_i2s_resume NULL #endif
- #define S3C24XX_I2S_RATES \ (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ @@ -465,14 +443,14 @@ static int s3c24xx_iis_dev_probe(struct platform_device *pdev) ret = devm_snd_soc_register_component(&pdev->dev, &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1); if (ret) { - pr_err("failed to register the dai\n"); + dev_err(&pdev->dev, "Failed to register the DAI\n"); return ret; }
ret = samsung_asoc_dma_platform_register(&pdev->dev, NULL, NULL, NULL); if (ret) - pr_err("failed to register the dma: %d\n", ret); + dev_err(&pdev->dev, "Failed to register the DMA: %d\n", ret);
return ret; } -- 1.9.1
participants (3)
-
Lars-Peter Clausen -
Mark Brown -
Sylwester Nawrocki